--- a/common/autoconf/basics.m4 Thu May 30 10:57:50 2013 -0700
+++ b/common/autoconf/basics.m4 Tue Jun 04 11:02:23 2013 -0700
@@ -72,7 +72,7 @@
AC_MSG_ERROR([The path of $1, which resolves as "$path", is not found.])
fi
- $1="`cd "$path"; $THEPWDCMD`"
+ $1="`cd "$path"; $THEPWDCMD -L`"
fi
])
@@ -169,10 +169,10 @@
COUNTER=0
sym_link_dir=`$DIRNAME [$]$1`
sym_link_file=`$BASENAME [$]$1`
- # Use the system pwd and not the shell builtin to resolve directory symlinks
cd $sym_link_dir
- cd `$THEPWDCMD`
- sym_link_dir=`$THEPWDCMD`
+ # Use -P flag to resolve symlinks in directories.
+ cd `$THEPWDCMD -P`
+ sym_link_dir=`$THEPWDCMD -P`
# Resolve file symlinks
while test $COUNTER -lt 20; do
ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
@@ -183,7 +183,7 @@
# Again resolve directory symlinks since the target of the just found
# link could be in a different directory
cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD`
+ sym_link_dir=`$THEPWDCMD -P`
sym_link_file=`$BASENAME $ISLINK`
let COUNTER=COUNTER+1
done
@@ -264,7 +264,6 @@
BASIC_REQUIRE_PROG(MKTEMP, mktemp)
BASIC_REQUIRE_PROG(MV, mv)
BASIC_REQUIRE_PROG(PRINTF, printf)
-BASIC_REQUIRE_PROG(THEPWDCMD, pwd)
BASIC_REQUIRE_PROG(RM, rm)
BASIC_REQUIRE_PROG(SH, sh)
BASIC_REQUIRE_PROG(SORT, sort)
@@ -297,6 +296,10 @@
# Always force rm.
RM="$RM -f"
+# pwd behaves differently on various platforms and some don't support the -L flag.
+# Always use the bash builtin pwd to get uniform behavior.
+THEPWDCMD=pwd
+
# These are not required on all platforms
AC_PATH_PROG(CYGPATH, cygpath)
AC_PATH_PROG(READLINK, readlink)
@@ -309,13 +312,12 @@
[
# Locate the directory of this script.
SCRIPT="[$]0"
-BASIC_REMOVE_SYMBOLIC_LINKS(SCRIPT)
-AUTOCONF_DIR=`cd \`$DIRNAME $SCRIPT\`; $THEPWDCMD`
+AUTOCONF_DIR=`cd \`$DIRNAME $SCRIPT\`; $THEPWDCMD -L`
# Where is the source? It is located two levels above the configure script.
CURDIR="$PWD"
cd "$AUTOCONF_DIR/../.."
-SRC_ROOT="`$THEPWDCMD`"
+SRC_ROOT="`$THEPWDCMD -L`"
if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
PATH_SEP=";"
@@ -374,13 +376,9 @@
[ CONF_NAME=${with_conf_name} ])
# Test from where we are running configure, in or outside of src root.
-# To enable comparison of directories, CURDIR needs to be symlink free
-# just like SRC_ROOT already is
-NOSYM_CURDIR="$CURDIR"
-BASIC_REMOVE_SYMBOLIC_LINKS(NOSYM_CURDIR)
-if test "x$NOSYM_CURDIR" = "x$SRC_ROOT" || test "x$NOSYM_CURDIR" = "x$SRC_ROOT/common" \
- || test "x$NOSYM_CURDIR" = "x$SRC_ROOT/common/autoconf" \
- || test "x$NOSYM_CURDIR" = "x$SRC_ROOT/common/makefiles" ; then
+if test "x$CURDIR" = "x$SRC_ROOT" || test "x$CURDIR" = "x$SRC_ROOT/common" \
+ || test "x$CURDIR" = "x$SRC_ROOT/common/autoconf" \
+ || test "x$CURDIR" = "x$SRC_ROOT/common/makefiles" ; then
# We are running configure from the src root.
# Create a default ./build/target-variant-debuglevel output root.
if test "x${CONF_NAME}" = x; then
@@ -617,6 +615,20 @@
if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
BASIC_REQUIRE_PROG(XATTR, xattr)
+ AC_PATH_PROG(CODESIGN, codesign)
+ if test "x$CODESIGN" != "x"; then
+ # Verify that the openjdk_codesign certificate is present
+ AC_MSG_CHECKING([if openjdk_codesign certificate is present])
+ rm -f codesign-testfile
+ touch codesign-testfile
+ codesign -s openjdk_codesign codesign-testfile 2>&AS_MESSAGE_LOG_FD >&AS_MESSAGE_LOG_FD || CODESIGN=
+ rm -f codesign-testfile
+ if test "x$CODESIGN" = x; then
+ AC_MSG_RESULT([no])
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
fi
])
--- a/common/autoconf/basics_windows.m4 Thu May 30 10:57:50 2013 -0700
+++ b/common/autoconf/basics_windows.m4 Tue Jun 04 11:02:23 2013 -0700
@@ -300,7 +300,7 @@
# Setup basic configuration paths, and platform-specific stuff related to PATHs.
AC_DEFUN([BASIC_CHECK_PATHS_WINDOWS],
[
- SRC_ROOT_LENGTH=`$THEPWDCMD|$WC -m`
+ SRC_ROOT_LENGTH=`$THEPWDCMD -L|$WC -m`
if test $SRC_ROOT_LENGTH -gt 100; then
AC_MSG_ERROR([Your base path is too long. It is $SRC_ROOT_LENGTH characters long, but only 100 is supported])
fi
--- a/common/autoconf/build-performance.m4 Thu May 30 10:57:50 2013 -0700
+++ b/common/autoconf/build-performance.m4 Tue Jun 04 11:02:23 2013 -0700
@@ -145,6 +145,9 @@
if test "$JOBS" -gt "16"; then
JOBS=16
fi
+ if test "$JOBS" -eq "0"; then
+ JOBS=1
+ fi
AC_MSG_RESULT([$JOBS])
else
JOBS=$with_jobs
--- a/common/autoconf/generated-configure.sh Thu May 30 10:57:50 2013 -0700
+++ b/common/autoconf/generated-configure.sh Tue Jun 04 11:02:23 2013 -0700
@@ -681,8 +681,8 @@
SHARED_LIBRARY
OBJ_SUFFIX
COMPILER_NAME
+JT_HOME
JTREGEXE
-JT_HOME
LIPO
ac_ct_OBJDUMP
OBJDUMP
@@ -797,6 +797,7 @@
OS_VERSION_MINOR
OS_VERSION_MAJOR
PKG_CONFIG
+CODESIGN
XATTR
TIME
STAT
@@ -900,7 +901,6 @@
SORT
SH
RM
-THEPWDCMD
PRINTF
MV
MKTEMP
@@ -988,6 +988,7 @@
with_cacerts_file
enable_unlimited_crypto
with_milestone
+with_update_version
with_build_number
with_user_release_suffix
with_boot_jdk
@@ -1727,6 +1728,7 @@
group
--with-cacerts-file specify alternative cacerts file
--with-milestone Set milestone value for build [internal]
+ --with-update-version Set update version value for build [b00]
--with-build-number Set build number value for build [b00]
--with-user-release-suffix
Add a custom string to the version string if build
@@ -3780,7 +3782,7 @@
#CUSTOM_AUTOCONF_INCLUDE
# Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1369723814
+DATE_WHEN_GENERATED=1370334570
###############################################################################
#
@@ -5169,65 +5171,6 @@
- for ac_prog in pwd
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_THEPWDCMD+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $THEPWDCMD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_THEPWDCMD="$THEPWDCMD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_THEPWDCMD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-THEPWDCMD=$ac_cv_path_THEPWDCMD
-if test -n "$THEPWDCMD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $THEPWDCMD" >&5
-$as_echo "$THEPWDCMD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$THEPWDCMD" && break
-done
-
-
- if test "x$THEPWDCMD" = x; then
- if test "xpwd" = x; then
- PROG_NAME=thepwdcmd
- else
- PROG_NAME=pwd
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
for ac_prog in rm
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
@@ -6426,6 +6369,10 @@
# Always force rm.
RM="$RM -f"
+# pwd behaves differently on various platforms and some don't support the -L flag.
+# Always use the bash builtin pwd to get uniform behavior.
+THEPWDCMD=pwd
+
# These are not required on all platforms
# Extract the first word of "cygpath", so it can be a program name with args.
set dummy cygpath; ac_word=$2
@@ -7133,65 +7080,17 @@
# Locate the directory of this script.
SCRIPT="$0"
-
- if test "x$OPENJDK_BUILD_OS" != xwindows; then
- # Follow a chain of symbolic links. Use readlink
- # where it exists, else fall back to horribly
- # complicated shell code.
- if test "x$READLINK_TESTED" != yes; then
- # On MacOSX there is a readlink tool with a different
- # purpose than the GNU readlink tool. Check the found readlink.
- ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
- if test "x$ISGNU" = x; then
- # A readlink that we do not know how to use.
- # Are there other non-GNU readlinks out there?
- READLINK_TESTED=yes
- READLINK=
- fi
- fi
-
- if test "x$READLINK" != x; then
- SCRIPT=`$READLINK -f $SCRIPT`
- else
- # Save the current directory for restoring afterwards
- STARTDIR=$PWD
- COUNTER=0
- sym_link_dir=`$DIRNAME $SCRIPT`
- sym_link_file=`$BASENAME $SCRIPT`
- # Use the system pwd and not the shell builtin to resolve directory symlinks
- cd $sym_link_dir
- cd `$THEPWDCMD`
- sym_link_dir=`$THEPWDCMD`
- # Resolve file symlinks
- while test $COUNTER -lt 20; do
- ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
- if test "x$ISLINK" == x; then
- # This is not a symbolic link! We are done!
- break
- fi
- # Again resolve directory symlinks since the target of the just found
- # link could be in a different directory
- cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD`
- sym_link_file=`$BASENAME $ISLINK`
- let COUNTER=COUNTER+1
- done
- cd $STARTDIR
- SCRIPT=$sym_link_dir/$sym_link_file
- fi
- fi
-
-AUTOCONF_DIR=`cd \`$DIRNAME $SCRIPT\`; $THEPWDCMD`
+AUTOCONF_DIR=`cd \`$DIRNAME $SCRIPT\`; $THEPWDCMD -L`
# Where is the source? It is located two levels above the configure script.
CURDIR="$PWD"
cd "$AUTOCONF_DIR/../.."
-SRC_ROOT="`$THEPWDCMD`"
+SRC_ROOT="`$THEPWDCMD -L`"
if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
PATH_SEP=";"
- SRC_ROOT_LENGTH=`$THEPWDCMD|$WC -m`
+ SRC_ROOT_LENGTH=`$THEPWDCMD -L|$WC -m`
if test $SRC_ROOT_LENGTH -gt 100; then
as_fn_error $? "Your base path is too long. It is $SRC_ROOT_LENGTH characters long, but only 100 is supported" "$LINENO" 5
fi
@@ -7407,7 +7306,7 @@
as_fn_error $? "The path of SRC_ROOT, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- SRC_ROOT="`cd "$path"; $THEPWDCMD`"
+ SRC_ROOT="`cd "$path"; $THEPWDCMD -L`"
fi
@@ -7529,7 +7428,7 @@
as_fn_error $? "The path of CURDIR, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- CURDIR="`cd "$path"; $THEPWDCMD`"
+ CURDIR="`cd "$path"; $THEPWDCMD -L`"
fi
@@ -7900,60 +7799,9 @@
# Test from where we are running configure, in or outside of src root.
-# To enable comparison of directories, CURDIR needs to be symlink free
-# just like SRC_ROOT already is
-NOSYM_CURDIR="$CURDIR"
-
- if test "x$OPENJDK_BUILD_OS" != xwindows; then
- # Follow a chain of symbolic links. Use readlink
- # where it exists, else fall back to horribly
- # complicated shell code.
- if test "x$READLINK_TESTED" != yes; then
- # On MacOSX there is a readlink tool with a different
- # purpose than the GNU readlink tool. Check the found readlink.
- ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
- if test "x$ISGNU" = x; then
- # A readlink that we do not know how to use.
- # Are there other non-GNU readlinks out there?
- READLINK_TESTED=yes
- READLINK=
- fi
- fi
-
- if test "x$READLINK" != x; then
- NOSYM_CURDIR=`$READLINK -f $NOSYM_CURDIR`
- else
- # Save the current directory for restoring afterwards
- STARTDIR=$PWD
- COUNTER=0
- sym_link_dir=`$DIRNAME $NOSYM_CURDIR`
- sym_link_file=`$BASENAME $NOSYM_CURDIR`
- # Use the system pwd and not the shell builtin to resolve directory symlinks
- cd $sym_link_dir
- cd `$THEPWDCMD`
- sym_link_dir=`$THEPWDCMD`
- # Resolve file symlinks
- while test $COUNTER -lt 20; do
- ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
- if test "x$ISLINK" == x; then
- # This is not a symbolic link! We are done!
- break
- fi
- # Again resolve directory symlinks since the target of the just found
- # link could be in a different directory
- cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD`
- sym_link_file=`$BASENAME $ISLINK`
- let COUNTER=COUNTER+1
- done
- cd $STARTDIR
- NOSYM_CURDIR=$sym_link_dir/$sym_link_file
- fi
- fi
-
-if test "x$NOSYM_CURDIR" = "x$SRC_ROOT" || test "x$NOSYM_CURDIR" = "x$SRC_ROOT/common" \
- || test "x$NOSYM_CURDIR" = "x$SRC_ROOT/common/autoconf" \
- || test "x$NOSYM_CURDIR" = "x$SRC_ROOT/common/makefiles" ; then
+if test "x$CURDIR" = "x$SRC_ROOT" || test "x$CURDIR" = "x$SRC_ROOT/common" \
+ || test "x$CURDIR" = "x$SRC_ROOT/common/autoconf" \
+ || test "x$CURDIR" = "x$SRC_ROOT/common/makefiles" ; then
# We are running configure from the src root.
# Create a default ./build/target-variant-debuglevel output root.
if test "x${CONF_NAME}" = x; then
@@ -8128,7 +7976,7 @@
as_fn_error $? "The path of OUTPUT_ROOT, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- OUTPUT_ROOT="`cd "$path"; $THEPWDCMD`"
+ OUTPUT_ROOT="`cd "$path"; $THEPWDCMD -L`"
fi
@@ -10493,6 +10341,62 @@
fi
+ # Extract the first word of "codesign", so it can be a program name with args.
+set dummy codesign; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_CODESIGN+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $CODESIGN in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CODESIGN="$CODESIGN" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_CODESIGN="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+CODESIGN=$ac_cv_path_CODESIGN
+if test -n "$CODESIGN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CODESIGN" >&5
+$as_echo "$CODESIGN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test "x$CODESIGN" != "x"; then
+ # Verify that the openjdk_codesign certificate is present
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if openjdk_codesign certificate is present" >&5
+$as_echo_n "checking if openjdk_codesign certificate is present... " >&6; }
+ rm -f codesign-testfile
+ touch codesign-testfile
+ codesign -s openjdk_codesign codesign-testfile 2>&5 >&5 || CODESIGN=
+ rm -f codesign-testfile
+ if test "x$CODESIGN" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ fi
+ fi
fi
@@ -10939,6 +10843,18 @@
fi
+# Check whether --with-update-version was given.
+if test "${with_update_version+set}" = set; then :
+ withval=$with_update_version;
+fi
+
+if test "x$with_update_version" = xyes; then
+ as_fn_error $? "Update version must have a value" "$LINENO" 5
+elif test "x$with_update_version" != x; then
+ JDK_UPDATE_VERSION="$with_update_version"
+fi
+
+
# Check whether --with-build-number was given.
if test "${with_build_number+set}" = set; then :
withval=$with_build_number;
@@ -11188,7 +11104,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -11520,7 +11436,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -11666,7 +11582,7 @@
as_fn_error $? "The path of JAVA_HOME_PROCESSED, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- JAVA_HOME_PROCESSED="`cd "$path"; $THEPWDCMD`"
+ JAVA_HOME_PROCESSED="`cd "$path"; $THEPWDCMD -L`"
fi
if test ! -d "$JAVA_HOME_PROCESSED"; then
@@ -11838,7 +11754,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -12026,7 +11942,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -12165,10 +12081,10 @@
COUNTER=0
sym_link_dir=`$DIRNAME $BINARY`
sym_link_file=`$BASENAME $BINARY`
- # Use the system pwd and not the shell builtin to resolve directory symlinks
cd $sym_link_dir
- cd `$THEPWDCMD`
- sym_link_dir=`$THEPWDCMD`
+ # Use -P flag to resolve symlinks in directories.
+ cd `$THEPWDCMD -P`
+ sym_link_dir=`$THEPWDCMD -P`
# Resolve file symlinks
while test $COUNTER -lt 20; do
ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
@@ -12179,7 +12095,7 @@
# Again resolve directory symlinks since the target of the just found
# link could be in a different directory
cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD`
+ sym_link_dir=`$THEPWDCMD -P`
sym_link_file=`$BASENAME $ISLINK`
let COUNTER=COUNTER+1
done
@@ -12354,7 +12270,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -12569,7 +12485,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -12749,7 +12665,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -12957,7 +12873,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -13137,7 +13053,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -13345,7 +13261,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -13525,7 +13441,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -13733,7 +13649,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -13913,7 +13829,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -14108,7 +14024,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -14286,7 +14202,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -14482,7 +14398,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -14660,7 +14576,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -14855,7 +14771,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -15033,7 +14949,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -15229,7 +15145,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -15407,7 +15323,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -15584,7 +15500,7 @@
as_fn_error $? "The path of BOOT_JDK, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- BOOT_JDK="`cd "$path"; $THEPWDCMD`"
+ BOOT_JDK="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
@@ -16261,14 +16177,28 @@
# Check whether --with-jtreg was given.
if test "${with_jtreg+set}" = set; then :
withval=$with_jtreg;
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for JTReg Regression Test Harness" >&5
-$as_echo_n "checking for JTReg Regression Test Harness... " >&6; }
-
- if test "x$with_jtreg" != x; then
- JT_HOME="$with_jtreg"
+else
+ with_jtreg=no
+fi
+
+
+ if test "x$with_jtreg" = xno; then
+ # jtreg disabled
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jtreg" >&5
+$as_echo_n "checking for jtreg... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ else
+ if test "x$with_jtreg" != xyes; then
+ # with path specified.
+ JT_HOME="$with_jtreg"
+ fi
+
+ if test "x$JT_HOME" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jtreg" >&5
+$as_echo_n "checking for jtreg... " >&6; }
+
+ # use JT_HOME enviroment var.
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
@@ -16388,20 +16318,82 @@
as_fn_error $? "The path of JT_HOME, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- JT_HOME="`cd "$path"; $THEPWDCMD`"
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JT_HOME" >&5
-$as_echo "$JT_HOME" >&6; }
-
- # jtreg win32 script works for everybody
- JTREGEXE="$JT_HOME/win32/bin/jtreg"
- if test ! -f "$JTREGEXE"; then
- as_fn_error $? "JTReg executable does not exist: $JTREGEXE" "$LINENO" 5
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+ JT_HOME="`cd "$path"; $THEPWDCMD -L`"
+ fi
+
+
+ # jtreg win32 script works for everybody
+ JTREGEXE="$JT_HOME/win32/bin/jtreg"
+
+ if test ! -f "$JTREGEXE"; then
+ as_fn_error $? "JTReg executable does not exist: $JTREGEXE" "$LINENO" 5
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JTREGEXE" >&5
+$as_echo "$JTREGEXE" >&6; }
+ else
+ # try to find jtreg on path
+
+ for ac_prog in jtreg
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_JTREGEXE+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $JTREGEXE in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_JTREGEXE="$JTREGEXE" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_JTREGEXE="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+JTREGEXE=$ac_cv_path_JTREGEXE
+if test -n "$JTREGEXE"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JTREGEXE" >&5
+$as_echo "$JTREGEXE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$JTREGEXE" && break
+done
+
+
+ if test "x$JTREGEXE" = x; then
+ if test "xjtreg" = x; then
+ PROG_NAME=jtregexe
+ else
+ PROG_NAME=jtreg
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+ JT_HOME="`$DIRNAME $JTREGEXE`"
+ fi
fi
@@ -17377,7 +17369,7 @@
as_fn_error $? "The path of MSVCR_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- MSVCR_DLL="`cd "$path"; $THEPWDCMD`"
+ MSVCR_DLL="`cd "$path"; $THEPWDCMD -L`"
fi
@@ -17534,7 +17526,7 @@
as_fn_error $? "The path of dxsdk_path, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- dxsdk_path="`cd "$path"; $THEPWDCMD`"
+ dxsdk_path="`cd "$path"; $THEPWDCMD -L`"
fi
@@ -17672,7 +17664,7 @@
as_fn_error $? "The path of DXSDK_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- DXSDK_LIB_PATH="`cd "$path"; $THEPWDCMD`"
+ DXSDK_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
fi
@@ -17808,7 +17800,7 @@
as_fn_error $? "The path of DXSDK_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- DXSDK_INCLUDE_PATH="`cd "$path"; $THEPWDCMD`"
+ DXSDK_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
fi
@@ -19395,10 +19387,10 @@
COUNTER=0
sym_link_dir=`$DIRNAME $TEST_COMPILER`
sym_link_file=`$BASENAME $TEST_COMPILER`
- # Use the system pwd and not the shell builtin to resolve directory symlinks
cd $sym_link_dir
- cd `$THEPWDCMD`
- sym_link_dir=`$THEPWDCMD`
+ # Use -P flag to resolve symlinks in directories.
+ cd `$THEPWDCMD -P`
+ sym_link_dir=`$THEPWDCMD -P`
# Resolve file symlinks
while test $COUNTER -lt 20; do
ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
@@ -19409,7 +19401,7 @@
# Again resolve directory symlinks since the target of the just found
# link could be in a different directory
cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD`
+ sym_link_dir=`$THEPWDCMD -P`
sym_link_file=`$BASENAME $ISLINK`
let COUNTER=COUNTER+1
done
@@ -19832,10 +19824,10 @@
COUNTER=0
sym_link_dir=`$DIRNAME $PROPER_COMPILER_CC`
sym_link_file=`$BASENAME $PROPER_COMPILER_CC`
- # Use the system pwd and not the shell builtin to resolve directory symlinks
cd $sym_link_dir
- cd `$THEPWDCMD`
- sym_link_dir=`$THEPWDCMD`
+ # Use -P flag to resolve symlinks in directories.
+ cd `$THEPWDCMD -P`
+ sym_link_dir=`$THEPWDCMD -P`
# Resolve file symlinks
while test $COUNTER -lt 20; do
ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
@@ -19846,7 +19838,7 @@
# Again resolve directory symlinks since the target of the just found
# link could be in a different directory
cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD`
+ sym_link_dir=`$THEPWDCMD -P`
sym_link_file=`$BASENAME $ISLINK`
let COUNTER=COUNTER+1
done
@@ -20968,10 +20960,10 @@
COUNTER=0
sym_link_dir=`$DIRNAME $TEST_COMPILER`
sym_link_file=`$BASENAME $TEST_COMPILER`
- # Use the system pwd and not the shell builtin to resolve directory symlinks
cd $sym_link_dir
- cd `$THEPWDCMD`
- sym_link_dir=`$THEPWDCMD`
+ # Use -P flag to resolve symlinks in directories.
+ cd `$THEPWDCMD -P`
+ sym_link_dir=`$THEPWDCMD -P`
# Resolve file symlinks
while test $COUNTER -lt 20; do
ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
@@ -20982,7 +20974,7 @@
# Again resolve directory symlinks since the target of the just found
# link could be in a different directory
cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD`
+ sym_link_dir=`$THEPWDCMD -P`
sym_link_file=`$BASENAME $ISLINK`
let COUNTER=COUNTER+1
done
@@ -21405,10 +21397,10 @@
COUNTER=0
sym_link_dir=`$DIRNAME $PROPER_COMPILER_CXX`
sym_link_file=`$BASENAME $PROPER_COMPILER_CXX`
- # Use the system pwd and not the shell builtin to resolve directory symlinks
cd $sym_link_dir
- cd `$THEPWDCMD`
- sym_link_dir=`$THEPWDCMD`
+ # Use -P flag to resolve symlinks in directories.
+ cd `$THEPWDCMD -P`
+ sym_link_dir=`$THEPWDCMD -P`
# Resolve file symlinks
while test $COUNTER -lt 20; do
ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
@@ -21419,7 +21411,7 @@
# Again resolve directory symlinks since the target of the just found
# link could be in a different directory
cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD`
+ sym_link_dir=`$THEPWDCMD -P`
sym_link_file=`$BASENAME $ISLINK`
let COUNTER=COUNTER+1
done
@@ -31131,7 +31123,7 @@
as_fn_error $? "The path of with_freetype, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- with_freetype="`cd "$path"; $THEPWDCMD`"
+ with_freetype="`cd "$path"; $THEPWDCMD -L`"
fi
FREETYPE2_LIBS="-L$with_freetype/lib -lfreetype"
@@ -31433,7 +31425,7 @@
as_fn_error $? "The path of FREETYPELOCATION, which resolves as \"$path\", is not found." "$LINENO" 5
fi
- FREETYPELOCATION="`cd "$path"; $THEPWDCMD`"
+ FREETYPELOCATION="`cd "$path"; $THEPWDCMD -L`"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype in some standard windows locations" >&5
@@ -32933,6 +32925,9 @@
if test "$JOBS" -gt "16"; then
JOBS=16
fi
+ if test "$JOBS" -eq "0"; then
+ JOBS=1
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $JOBS" >&5
$as_echo "$JOBS" >&6; }
else
--- a/common/autoconf/jdk-options.m4 Thu May 30 10:57:50 2013 -0700
+++ b/common/autoconf/jdk-options.m4 Tue Jun 04 11:02:23 2013 -0700
@@ -422,6 +422,14 @@
MILESTONE=internal
fi
+AC_ARG_WITH(update-version, [AS_HELP_STRING([--with-update-version],
+ [Set update version value for build @<:@b00@:>@])])
+if test "x$with_update_version" = xyes; then
+ AC_MSG_ERROR([Update version must have a value])
+elif test "x$with_update_version" != x; then
+ JDK_UPDATE_VERSION="$with_update_version"
+fi
+
AC_ARG_WITH(build-number, [AS_HELP_STRING([--with-build-number],
[Set build number value for build @<:@b00@:>@])])
if test "x$with_build_number" = xyes; then
--- a/common/autoconf/spec.gmk.in Thu May 30 10:57:50 2013 -0700
+++ b/common/autoconf/spec.gmk.in Tue Jun 04 11:02:23 2013 -0700
@@ -478,6 +478,7 @@
# CD is going away, but remains to cater for legacy makefiles.
CD:=cd
CHMOD:=@CHMOD@
+CODESIGN:=@CODESIGN@
COMM:=@COMM@
CP:=@CP@
CPIO:=@CPIO@
--- a/common/autoconf/toolchain.m4 Thu May 30 10:57:50 2013 -0700
+++ b/common/autoconf/toolchain.m4 Tue Jun 04 11:02:23 2013 -0700
@@ -36,7 +36,7 @@
$ECHO $COMPILER_VERSION_TEST | $GREP "^.*: Sun $COMPILER_NAME" > /dev/null
if test $? -ne 0; then
GCC_VERSION_TEST=`$COMPILER --version 2>&1 | $HEAD -n 1`
-
+
AC_MSG_NOTICE([The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required Sun Studio compiler.])
AC_MSG_NOTICE([The result from running with -V was: "$COMPILER_VERSION_TEST" and with --version: "$GCC_VERSION_TEST"])
AC_MSG_ERROR([Sun Studio compiler is required. Try setting --with-tools-dir.])
@@ -69,7 +69,7 @@
AC_MSG_NOTICE([The result from running with --version was: "$COMPILER_VERSION_TEST"])
AC_MSG_ERROR([GCC compiler is required. Try setting --with-tools-dir.])
fi
-
+
# First line typically looks something like:
# gcc (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2
COMPILER_VERSION=`$ECHO $COMPILER_VERSION_TEST | $SED -n "s/^.* \(@<:@1-9@:>@@<:@0-9.@:>@*\)/\1/p"`
@@ -142,7 +142,7 @@
BASIC_REMOVE_SYMBOLIC_LINKS(TEST_COMPILER)
AC_MSG_RESULT([$TEST_COMPILER])
AC_MSG_CHECKING([if $1 is disguised ccache])
-
+
COMPILER_BASENAME=`$BASENAME "$TEST_COMPILER"`
if test "x$COMPILER_BASENAME" = "xccache"; then
AC_MSG_RESULT([yes, trying to find proper $COMPILER_NAME compiler])
@@ -226,11 +226,11 @@
],
[])
-if test "x$SYS_ROOT" != "x/" ; then
+if test "x$SYS_ROOT" != "x/" ; then
CFLAGS="--sysroot=$SYS_ROOT $CFLAGS"
CXXFLAGS="--sysroot=$SYS_ROOT $CXXFLAGS"
- OBJCFLAGS="--sysroot=$SYS_ROOT $OBJCFLAGS"
- OBJCXXFLAGS="--sysroot=$SYS_ROOT $OBJCFLAGS"
+ OBJCFLAGS="--sysroot=$SYS_ROOT $OBJCFLAGS"
+ OBJCXXFLAGS="--sysroot=$SYS_ROOT $OBJCFLAGS"
CPPFLAGS="--sysroot=$SYS_ROOT $CPPFLAGS"
LDFLAGS="--sysroot=$SYS_ROOT $LDFLAGS"
fi
@@ -330,7 +330,7 @@
COMPILER_NAME=gcc
COMPILER_TYPE=CC
AS_IF([test "x$OPENJDK_TARGET_OS" = xwindows], [
- # For now, assume that we are always compiling using cl.exe.
+ # For now, assume that we are always compiling using cl.exe.
CC_OUT_OPTION=-Fo
EXE_OUT_OPTION=-out:
LD_OUT_OPTION=-out:
@@ -491,7 +491,7 @@
###############################################################################
#
-# How to compile shared libraries.
+# How to compile shared libraries.
#
if test "x$GCC" = xyes; then
@@ -525,7 +525,7 @@
SHARED_LIBRARY_FLAGS="-dynamiclib -compatibility_version 1.0.0 -current_version 1.0.0 $PICFLAG"
SHARED_LIBRARY_SUFFIX='.dylib'
EXE_SUFFIX=''
- SET_SHARED_LIBRARY_NAME='-Xlinker -install_name -Xlinker @rpath/[$]1'
+ SET_SHARED_LIBRARY_NAME='-Xlinker -install_name -Xlinker @rpath/[$]1'
SET_SHARED_LIBRARY_MAPFILE=''
SET_SHARED_LIBRARY_ORIGIN='-Xlinker -rpath -Xlinker @loader_path/.'
SET_EXECUTABLE_ORIGIN="$SET_SHARED_LIBRARY_ORIGIN"
@@ -676,7 +676,7 @@
# Use single precision floating point with 'float'
CC_HIGHEST="$CC_HIGHEST -fsingle"
# Assume memory references via basic pointer types do not alias
- # (Source with excessing pointer casting and data access with mixed
+ # (Source with excessing pointer casting and data access with mixed
# pointer types are not recommended)
CC_HIGHEST="$CC_HIGHEST -xalias_level=basic"
# Use intrinsic or inline versions for math/std functions
@@ -892,7 +892,7 @@
fi
if test "x$OPENJDK_TARGET_OS" = xmacosx; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DMACOSX -D_ALLBSD_SOURCE"
- # Setting these parameters makes it an error to link to macosx APIs that are
+ # Setting these parameters makes it an error to link to macosx APIs that are
# newer than the given OS version and makes the linked binaries compatible even
# if built on a newer version of the OS.
# The expected format is X.Y.Z
@@ -940,12 +940,12 @@
# Which should we link to? Are we lucky enough that the binary api to the libjvm.so library
# is identical for client and server? Yes. Which is picked at runtime (client or server)?
# Neither, since the chosen libjvm.so has already been loaded by the launcher, all the following
-# libraries will link to whatever is in memory. Yuck.
+# libraries will link to whatever is in memory. Yuck.
#
# Thus we offer the compiler to find libjvm.so first in server then in client. It works. Ugh.
if test "x$COMPILER_NAME" = xcl; then
LDFLAGS_JDK="$LDFLAGS_JDK -nologo -opt:ref -incremental:no"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
LDFLAGS_JDK="$LDFLAGS_JDK -safeseh"
fi
# TODO: make -debug optional "--disable-full-debug-symbols"
@@ -965,7 +965,7 @@
if test -n "$HAS_GNU_HASH"; then
LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker --hash-style=both "
fi
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
+ if test "x$OPENJDK_TARGET_OS" = xlinux; then
# And since we now know that the linker is gnu, then add -z defs, to forbid
# undefined symbols in object files.
LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker -z -Xlinker defs"
@@ -1006,7 +1006,7 @@
# Adjust flags according to debug level.
case $DEBUG_LEVEL in
- fastdebug )
+ fastdebug )
CFLAGS="$CFLAGS $D_FLAG"
JAVAC_FLAGS="$JAVAC_FLAGS -g"
;;
@@ -1018,9 +1018,9 @@
CXX_O_FLAG_NORM="$CXX_O_FLAG_NONE"
JAVAC_FLAGS="$JAVAC_FLAGS -g"
;;
-esac
+esac
-
+
AC_SUBST(CFLAGS_JDKLIB)
AC_SUBST(CFLAGS_JDKEXE)
@@ -1092,28 +1092,45 @@
AC_SUBST(COMPILER_SUPPORTS_TARGET_BITS_FLAG)
])
-# Setup the JTREG paths
-AC_DEFUN_ONCE([TOOLCHAIN_SETUP_JTREG],
-[
- AC_ARG_WITH(jtreg, [AS_HELP_STRING([--with-jtreg],
- [Regression Test Harness @<:@probed@:>@])])
-
- AC_MSG_CHECKING([for JTReg Regression Test Harness])
-
- if test "x$with_jtreg" != x; then
- JT_HOME="$with_jtreg"
- BASIC_FIXUP_PATH([JT_HOME])
- AC_MSG_RESULT($JT_HOME)
-
- # jtreg win32 script works for everybody
- JTREGEXE="$JT_HOME/win32/bin/jtreg"
- if test ! -f "$JTREGEXE"; then
- AC_MSG_ERROR([JTReg executable does not exist: $JTREGEXE])
+# Setup the JTREG paths
+AC_DEFUN_ONCE([TOOLCHAIN_SETUP_JTREG],
+[
+ AC_ARG_WITH(jtreg, [AS_HELP_STRING([--with-jtreg],
+ [Regression Test Harness @<:@probed@:>@])],
+ [],
+ [with_jtreg=no])
+
+ if test "x$with_jtreg" = xno; then
+ # jtreg disabled
+ AC_MSG_CHECKING([for jtreg])
+ AC_MSG_RESULT(no)
+ else
+ if test "x$with_jtreg" != xyes; then
+ # with path specified.
+ JT_HOME="$with_jtreg"
fi
- else
- AC_MSG_RESULT(no)
- fi
-
- AC_SUBST(JT_HOME)
- AC_SUBST(JTREGEXE)
+
+ if test "x$JT_HOME" != x; then
+ AC_MSG_CHECKING([for jtreg])
+
+ # use JT_HOME enviroment var.
+ BASIC_FIXUP_PATH([JT_HOME])
+
+ # jtreg win32 script works for everybody
+ JTREGEXE="$JT_HOME/win32/bin/jtreg"
+
+ if test ! -f "$JTREGEXE"; then
+ AC_MSG_ERROR([JTReg executable does not exist: $JTREGEXE])
+ fi
+
+ AC_MSG_RESULT($JTREGEXE)
+ else
+ # try to find jtreg on path
+ BASIC_REQUIRE_PROG(JTREGEXE, jtreg)
+ JT_HOME="`$DIRNAME $JTREGEXE`"
+ fi
+ fi
+
+ AC_SUBST(JT_HOME)
+ AC_SUBST(JTREGEXE)
])
--- a/common/makefiles/Main.gmk Thu May 30 10:57:50 2013 -0700
+++ b/common/makefiles/Main.gmk Tue Jun 04 11:02:23 2013 -0700
@@ -183,7 +183,7 @@
test: images test-only
test-only: start-make
@$(call TargetEnter)
- @($(CD) $(SRC_ROOT)/test && $(BUILD_LOG_WRAPPER) $(MAKE) -j1 -k MAKEFLAGS= PRODUCT_HOME=$(JDK_IMAGE_DIR) JPRT_JAVA_HOME=$(JDK_IMAGE_DIR) ALT_OUTPUTDIR=$(OUTPUT_ROOT) $(TEST)) || true
+ @($(CD) $(SRC_ROOT)/test && $(BUILD_LOG_WRAPPER) $(MAKE) -j1 -k JT_HOME=$(JT_HOME) MAKEFLAGS= PRODUCT_HOME=$(JDK_IMAGE_DIR) JPRT_JAVA_HOME=$(JDK_IMAGE_DIR) ALT_OUTPUTDIR=$(OUTPUT_ROOT) $(TEST)) || true
@$(call TargetExit)
# Stores the tips for each repository. This file is be used when constructing the jdk image and can be
--- a/common/makefiles/MakeBase.gmk Thu May 30 10:57:50 2013 -0700
+++ b/common/makefiles/MakeBase.gmk Tue Jun 04 11:02:23 2013 -0700
@@ -361,8 +361,8 @@
# This is to be called by all SetupFoo macros
define LogSetupMacroEntry
- $(if $(26),$(error Internal makefile error: Too many arguments to LogSetupMacroEntry, please update MakeBase.gmk))
- $(if $(findstring $(LOG_LEVEL),debug trace), $(info $1 $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25,$(if $($i),$(NEWLINE) $(strip [$i] $($i))))))
+ $(if $(27),$(error Internal makefile error: Too many arguments to LogSetupMacroEntry, please update MakeBase.gmk))
+ $(if $(findstring $(LOG_LEVEL),debug trace), $(info $1 $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26,$(if $($i),$(NEWLINE) $(strip [$i] $($i))))))
endef
# Make directory without forking mkdir if not needed
--- a/common/makefiles/NativeCompilation.gmk Thu May 30 10:57:50 2013 -0700
+++ b/common/makefiles/NativeCompilation.gmk Tue Jun 04 11:02:23 2013 -0700
@@ -147,9 +147,9 @@
# CC the compiler to use, default is $(CC)
# LDEXE the linker to use for linking executables, default is $(LDEXE)
# OPTIMIZATION sets optimization level to NONE, LOW, HIGH, HIGHEST
- $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
- $(call LogSetupMacroEntry,SetupNativeCompilation($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15),$(16),$(17),$(18),$(19),$(20),$(21),$(22),$(23),$(24),$(25))
- $(if $(26),$(error Internal makefile error: Too many arguments to SetupNativeCompilation, please update NativeCompilation.gmk))
+ $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
+ $(call LogSetupMacroEntry,SetupNativeCompilation($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15),$(16),$(17),$(18),$(19),$(20),$(21),$(22),$(23),$(24),$(25),$(26))
+ $(if $(27),$(error Internal makefile error: Too many arguments to SetupNativeCompilation, please update NativeCompilation.gmk))
ifneq (,$$($1_BIN))
$$(error BIN has been replaced with OBJECT_DIR)
@@ -567,6 +567,12 @@
ifneq (,$$($1_GEN_MANIFEST))
$(MT) -nologo -manifest $$($1_GEN_MANIFEST) -outputresource:$$@;#1
endif
-
+ # This only works if the openjdk_codesign identity is present on the system. Let
+ # silently fail otherwise.
+ ifneq (,$(CODESIGN))
+ ifneq (,$$($1_CODESIGN))
+ $(CODESIGN) -s openjdk_codesign $$@
+ endif
+ endif
endif
endef