--- a/jdk/make/common/Defs-linux.gmk	Tue Apr 03 11:52:06 2012 +0900
+++ b/jdk/make/common/Defs-linux.gmk	Tue Apr 03 12:57:47 2012 -0700
@@ -73,7 +73,36 @@
 # CC compiler object code output directive flag value
 CC_OBJECT_OUTPUT_FLAG = -o #trailing blank required!
 
-ENABLE_FULL_DEBUG_SYMBOLS ?= 1
+# The Full Debug Symbols (FDS) default for VARIANT == OPT builds is
+# enabled with debug info files ZIP'ed to save space. For VARIANT !=
+# OPT builds, FDS is always enabled, after all a debug build without
+# debug info isn't very useful. The ZIP_DEBUGINFO_FILES option only has
+# meaning when FDS is enabled.
+#
+# If you invoke a build with FULL_DEBUG_SYMBOLS=0, then FDS will be
+# disabled for a VARIANT == OPT build.
+#
+# Note: Use of a different variable name for the FDS override option
+# versus the FDS enabled check is intentional (FULL_DEBUG_SYMBOLS
+# versus ENABLE_FULL_DEBUG_SYMBOLS). For auto build systems that pass
+# in options via environment variables, use of distinct variables
+# prevents strange behaviours. For example, in a VARIANT != OPT build,
+# the FULL_DEBUG_SYMBOLS environment variable will be 0, but the
+# ENABLE_FULL_DEBUG_SYMBOLS make variable will be 1. If the same
+# variable name is used, then different values can be picked up by
+# different parts of the build. Just to be clear, we only need two
+# variable names because the incoming option value can be overridden
+# in some situations, e.g., a VARIANT != OPT build.
+
+ifeq ($(VARIANT), OPT)
+  FULL_DEBUG_SYMBOLS ?= 1
+  ENABLE_FULL_DEBUG_SYMBOLS = $(FULL_DEBUG_SYMBOLS)
+else
+  # debug variants always get Full Debug Symbols (if available)
+  ENABLE_FULL_DEBUG_SYMBOLS = 1
+endif
+_JUNK_ := $(shell \
+  echo >&2 "INFO: ENABLE_FULL_DEBUG_SYMBOLS=$(ENABLE_FULL_DEBUG_SYMBOLS)")
 # since objcopy is optional, we set ZIP_DEBUGINFO_FILES later
 
 ifeq ($(ENABLE_FULL_DEBUG_SYMBOLS),1)
@@ -122,7 +151,9 @@
     _JUNK_ := $(shell \
       echo >&2 "INFO: STRIP_POLICY=$(STRIP_POLICY)")
 
-    ZIP_DEBUGINFO_FILES ?= 1
+    # HACK: disable ZIP_DEBUGINFO_FILES by default until install repo
+    # changes are promoted
+    ZIP_DEBUGINFO_FILES ?= 0
 
     _JUNK_ := $(shell \
       echo >&2 "INFO: ZIP_DEBUGINFO_FILES=$(ZIP_DEBUGINFO_FILES)")

--- a/jdk/make/common/Defs-solaris.gmk	Tue Apr 03 11:52:06 2012 +0900
+++ b/jdk/make/common/Defs-solaris.gmk	Tue Apr 03 12:57:47 2012 -0700
@@ -73,7 +73,36 @@
 # CC compiler object code output directive flag value
 CC_OBJECT_OUTPUT_FLAG = -o #trailing blank required!
 
-ENABLE_FULL_DEBUG_SYMBOLS ?= 1
+# The Full Debug Symbols (FDS) default for VARIANT == OPT builds is
+# enabled with debug info files ZIP'ed to save space. For VARIANT !=
+# OPT builds, FDS is always enabled, after all a debug build without
+# debug info isn't very useful. The ZIP_DEBUGINFO_FILES option only has
+# meaning when FDS is enabled.
+#
+# If you invoke a build with FULL_DEBUG_SYMBOLS=0, then FDS will be
+# disabled for a VARIANT == OPT build.
+#
+# Note: Use of a different variable name for the FDS override option
+# versus the FDS enabled check is intentional (FULL_DEBUG_SYMBOLS
+# versus ENABLE_FULL_DEBUG_SYMBOLS). For auto build systems that pass
+# in options via environment variables, use of distinct variables
+# prevents strange behaviours. For example, in a VARIANT != OPT build,
+# the FULL_DEBUG_SYMBOLS environment variable will be 0, but the
+# ENABLE_FULL_DEBUG_SYMBOLS make variable will be 1. If the same
+# variable name is used, then different values can be picked up by
+# different parts of the build. Just to be clear, we only need two
+# variable names because the incoming option value can be overridden
+# in some situations, e.g., a VARIANT != OPT build.
+
+ifeq ($(VARIANT), OPT)
+  FULL_DEBUG_SYMBOLS ?= 1
+  ENABLE_FULL_DEBUG_SYMBOLS = $(FULL_DEBUG_SYMBOLS)
+else
+  # debug variants always get Full Debug Symbols (if available)
+  ENABLE_FULL_DEBUG_SYMBOLS = 1
+endif
+_JUNK_ := $(shell \
+  echo >&2 "INFO: ENABLE_FULL_DEBUG_SYMBOLS=$(ENABLE_FULL_DEBUG_SYMBOLS)")
 # since objcopy is optional, we set ZIP_DEBUGINFO_FILES later
 
 ifeq ($(ENABLE_FULL_DEBUG_SYMBOLS),1)
@@ -130,7 +159,9 @@
     _JUNK_ := $(shell \
       echo >&2 "INFO: STRIP_POLICY=$(STRIP_POLICY)")
 
-    ZIP_DEBUGINFO_FILES ?= 1
+    # HACK: disable ZIP_DEBUGINFO_FILES by default until install repo
+    # changes are promoted
+    ZIP_DEBUGINFO_FILES ?= 0
 
     _JUNK_ := $(shell \
       echo >&2 "INFO: ZIP_DEBUGINFO_FILES=$(ZIP_DEBUGINFO_FILES)")

--- a/jdk/make/common/Defs-windows.gmk	Tue Apr 03 11:52:06 2012 +0900
+++ b/jdk/make/common/Defs-windows.gmk	Tue Apr 03 12:57:47 2012 -0700
@@ -76,15 +76,45 @@
 EXTRA_LFLAGS += /LIBPATH:$(DXSDK_LIB_PATH)
 
 # Full Debug Symbols has been enabled on Windows since JDK1.4.1.
-# Default is enabled with debug info files ZIP'ed to save space.
+# The Full Debug Symbols (FDS) default for VARIANT == OPT builds is
+# enabled with debug info files ZIP'ed to save space. For VARIANT !=
+# OPT builds, FDS is always enabled, after all a debug build without
+# debug info isn't very useful. The ZIP_DEBUGINFO_FILES option only has
+# meaning when FDS is enabled.
+#
+# If you invoke a build with FULL_DEBUG_SYMBOLS=0, then FDS will be
+# disabled for a VARIANT == OPT build.
+#
+# Note: Use of a different variable name for the FDS override option
+# versus the FDS enabled check is intentional (FULL_DEBUG_SYMBOLS
+# versus ENABLE_FULL_DEBUG_SYMBOLS). For auto build systems that pass
+# in options via environment variables, use of distinct variables
+# prevents strange behaviours. For example, in a VARIANT != OPT build,
+# the FULL_DEBUG_SYMBOLS environment variable will be 0, but the
+# ENABLE_FULL_DEBUG_SYMBOLS make variable will be 1. If the same
+# variable name is used, then different values can be picked up by
+# different parts of the build. Just to be clear, we only need two
+# variable names because the incoming option value can be overridden
+# in some situations, e.g., a VARIANT != OPT build.
 
-ENABLE_FULL_DEBUG_SYMBOLS ?= 1
+ifeq ($(VARIANT), OPT)
+  FULL_DEBUG_SYMBOLS ?= 1
+  ENABLE_FULL_DEBUG_SYMBOLS = $(FULL_DEBUG_SYMBOLS)
+else
+  # debug variants always get Full Debug Symbols (if available)
+  ENABLE_FULL_DEBUG_SYMBOLS = 1
+endif
+_JUNK_ := $(shell \
+  echo >&2 "INFO: ENABLE_FULL_DEBUG_SYMBOLS=$(ENABLE_FULL_DEBUG_SYMBOLS)")
 
 ifeq ($(ENABLE_FULL_DEBUG_SYMBOLS),1)
-  ZIP_DEBUGINFO_FILES ?= 1
+  # HACK: disable ZIP_DEBUGINFO_FILES by default until install repo
+  # changes are promoted
+  ZIP_DEBUGINFO_FILES ?= 0
 else
   ZIP_DEBUGINFO_FILES=0
 endif
+_JUNK_ := $(shell echo >&2 "INFO: ZIP_DEBUGINFO_FILES=$(ZIP_DEBUGINFO_FILES)")
 
 # C Compiler flag definitions
 
@@ -224,7 +254,9 @@
   # All builds get the same runtime setting
   CFLAGS_COMMON += $(MS_RUNTIME_OPTION) $(CFLAGS_$(COMPILER_VERSION))
 
-  LDEBUG = /debug
+  ifeq ($(ENABLE_FULL_DEBUG_SYMBOLS),1)
+    LDEBUG = /debug
+  endif
   
   ifeq ($(VTUNE_SUPPORT), true)
     OTHER_CFLAGS = -Z7 -Ox 
@@ -258,7 +290,9 @@
 #
 # Output options (use specific filenames to avoid parallel compile errors)
 #
-CFLAGS_COMMON += -Fd$(OBJDIR)/$(basename $(@F)).pdb -Fm$(OBJDIR)/$(basename $(@F)).map
+ifeq ($(ENABLE_FULL_DEBUG_SYMBOLS),1)
+  CFLAGS_COMMON += -Fd$(OBJDIR)/$(basename $(@F)).pdb -Fm$(OBJDIR)/$(basename $(@F)).map
+endif
 
 #
 # Use -wdNNNN to disable warning NNNN.

--- a/jdk/make/common/Library.gmk	Tue Apr 03 11:52:06 2012 +0900
+++ b/jdk/make/common/Library.gmk	Tue Apr 03 12:57:47 2012 -0700
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -167,17 +167,23 @@
 # build it into $(OBJDIR) so that the other generated files get put 
 # there, then copy just the DLL (and MAP file) to the requested directory.
 #
+ifeq ($(ENABLE_FULL_DEBUG_SYMBOLS),1)
+  MAP_OPTION="-map:$(OBJDIR)/$(LIBRARY).map"
+endif
+
 $(ACTUAL_LIBRARY):: $(OBJDIR)/$(LIBRARY).lcf
 	@$(prep-target)
 	@$(MKDIR) -p $(OBJDIR)
 	$(LINK) -dll -out:$(OBJDIR)/$(@F) \
-	  -map:$(OBJDIR)/$(LIBRARY).map \
+	  $(MAP_OPTION) \
 	  $(LFLAGS) @$(OBJDIR)/$(LIBRARY).lcf \
 	  $(OTHER_LCF) $(LDLIBS)
 	$(CP) $(OBJDIR)/$(@F) $@
 	@$(call binary_file_verification,$@)
+ifeq ($(ENABLE_FULL_DEBUG_SYMBOLS),1)
 	$(CP) $(OBJDIR)/$(LIBRARY).map $(@D)
 	$(CP) $(OBJDIR)/$(LIBRARY).pdb $(@D)
+endif
 
 endif # LIBRARY
 

--- a/jdk/make/common/Program.gmk	Tue Apr 03 11:52:06 2012 +0900
+++ b/jdk/make/common/Program.gmk	Tue Apr 03 12:57:47 2012 -0700
@@ -171,6 +171,10 @@
 	@$(prep-target)
 	$(SED) 's%IMVERSION%$(IMVERSION)%g;s%PROGRAM%$(PROGRAM)%g' $< > $@
 
+ifeq ($(ENABLE_FULL_DEBUG_SYMBOLS),1)
+  MAP_OPTION="-map:$(OBJDIR)/$(PROGRAM).map"
+endif
+
   # We used a hand-crafted manifest file for all executables.
   # It is tweaked to embed the build number and executable name.
   # Use ";#2" for .dll and ";#1" for .exe in the MT command below:
@@ -179,7 +183,7 @@
 	@set -- $?; \
 	    $(ECHO) Rebuilding $@ because of $$1 $$2 $$3 $$4 $$5 $$6 $${7:+...};
 	$(LINK) -out:$@ /STACK:$(STACK_SIZE) \
-	    -map:$(OBJDIR)/$(PROGRAM).map $(LFLAGS) $(LDFLAGS) \
+	    $(MAP_OPTION) $(LFLAGS) $(LDFLAGS) \
 	    @$(OBJDIR)/$(PROGRAM).lcf $(LDLIBS)
   ifdef MT
 	$(MT) /manifest $(OBJDIR)/$(PROGRAM).exe.manifest /outputresource:$@;#1