--- a/common/autoconf/generated-configure.sh	Tue Mar 03 08:48:21 2015 -0800
+++ b/common/autoconf/generated-configure.sh	Wed Mar 04 10:47:36 2015 +0100
@@ -761,9 +761,6 @@
 RC
 MT
 LIPO
-ac_ct_OBJC
-OBJCFLAGS
-OBJC
 ac_ct_AR
 AR
 AS
@@ -1198,8 +1195,6 @@
 CXXCPP
 AS
 AR
-OBJC
-OBJCFLAGS
 LIPO
 STRIP
 NM
@@ -2080,8 +2075,6 @@
   CXXCPP      C++ preprocessor
   AS          Override default value for AS
   AR          Override default value for AR
-  OBJC        Objective C compiler command
-  OBJCFLAGS   Objective C compiler flags
   LIPO        Override default value for LIPO
   STRIP       Override default value for STRIP
   NM          Override default value for NM
@@ -2340,44 +2333,6 @@
 
 } # ac_fn_cxx_try_cpp
 
-# ac_fn_objc_try_compile LINENO
-# -----------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_objc_try_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext
-  if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
-	 test -z "$ac_objc_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_objc_try_compile
-
 # ac_fn_c_try_link LINENO
 # -----------------------
 # Try to link conftest.$ac_ext, and return whether this succeeded.
@@ -4183,7 +4138,7 @@
 
 
 #
-# Copyright (c) 2011, 2014, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -4393,7 +4348,7 @@
 #CUSTOM_AUTOCONF_INCLUDE
 
 # Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1424976950
+DATE_WHEN_GENERATED=1425462435
 
 ###############################################################################
 #
@@ -26654,7 +26609,6 @@
   # Store the CFLAGS etc passed to the configure script.
   ORG_CFLAGS="$CFLAGS"
   ORG_CXXFLAGS="$CXXFLAGS"
-  ORG_OBJCFLAGS="$OBJCFLAGS"
 
   # On Windows, we need to detect the visual studio installation first.
   # This will change the PATH, but we need to keep that new PATH even
@@ -33542,543 +33496,6 @@
 
 
   if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
-    ac_ext=m
-ac_cpp='$OBJCPP $CPPFLAGS'
-ac_compile='$OBJC -c $OBJCFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$OBJC -o conftest$ac_exeext $OBJCFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_objc_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  for ac_prog in gcc objcc objc cc CC
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OBJC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OBJC"; then
-  ac_cv_prog_OBJC="$OBJC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_OBJC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OBJC=$ac_cv_prog_OBJC
-if test -n "$OBJC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJC" >&5
-$as_echo "$OBJC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$OBJC" && break
-  done
-fi
-if test -z "$OBJC"; then
-  ac_ct_OBJC=$OBJC
-  for ac_prog in gcc objcc objc cc CC
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OBJC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_OBJC"; then
-  ac_cv_prog_ac_ct_OBJC="$ac_ct_OBJC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_OBJC="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OBJC=$ac_cv_prog_ac_ct_OBJC
-if test -n "$ac_ct_OBJC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJC" >&5
-$as_echo "$ac_ct_OBJC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_OBJC" && break
-done
-
-  if test "x$ac_ct_OBJC" = x; then
-    OBJC="gcc"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    OBJC=$ac_ct_OBJC
-  fi
-fi
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for Objective C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Objective C compiler" >&5
-$as_echo_n "checking whether we are using the GNU Objective C compiler... " >&6; }
-if ${ac_cv_objc_compiler_gnu+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_objc_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_objc_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objc_compiler_gnu" >&5
-$as_echo "$ac_cv_objc_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GOBJC=yes
-else
-  GOBJC=
-fi
-ac_test_OBJCFLAGS=${OBJCFLAGS+set}
-ac_save_OBJCFLAGS=$OBJCFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $OBJC accepts -g" >&5
-$as_echo_n "checking whether $OBJC accepts -g... " >&6; }
-if ${ac_cv_prog_objc_g+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_objc_werror_flag=$ac_objc_werror_flag
-   ac_objc_werror_flag=yes
-   ac_cv_prog_objc_g=no
-   OBJCFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_objc_try_compile "$LINENO"; then :
-  ac_cv_prog_objc_g=yes
-else
-  OBJCFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_objc_try_compile "$LINENO"; then :
-
-else
-  ac_objc_werror_flag=$ac_save_objc_werror_flag
-	 OBJCFLAGS="-g"
-	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_objc_try_compile "$LINENO"; then :
-  ac_cv_prog_objc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_objc_werror_flag=$ac_save_objc_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_objc_g" >&5
-$as_echo "$ac_cv_prog_objc_g" >&6; }
-if test "$ac_test_OBJCFLAGS" = set; then
-  OBJCFLAGS=$ac_save_OBJCFLAGS
-elif test $ac_cv_prog_objc_g = yes; then
-  if test "$GOBJC" = yes; then
-    OBJCFLAGS="-g -O2"
-  else
-    OBJCFLAGS="-g"
-  fi
-else
-  if test "$GOBJC" = yes; then
-    OBJCFLAGS="-O2"
-  else
-    OBJCFLAGS=
-  fi
-fi
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-  # Only process if variable expands to non-empty
-
-  if test "x$OBJC" != x; then
-    if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
-  # First separate the path from the arguments. This will split at the first
-  # space.
-  complete="$OBJC"
-  path="${complete%% *}"
-  tmp="$complete EOL"
-  arguments="${tmp#* }"
-
-  # Input might be given as Windows format, start by converting to
-  # unix format.
-  new_path=`$CYGPATH -u "$path"`
-
-  # Now try to locate executable using which
-  new_path=`$WHICH "$new_path" 2> /dev/null`
-  # bat and cmd files are not always considered executable in cygwin causing which
-  # to not find them
-  if test "x$new_path" = x \
-      && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
-      && test "x`$LS \"$path\" 2>/dev/null`" != x; then
-    new_path=`$CYGPATH -u "$path"`
-  fi
-  if test "x$new_path" = x; then
-    # Oops. Which didn't find the executable.
-    # The splitting of arguments from the executable at a space might have been incorrect,
-    # since paths with space are more likely in Windows. Give it another try with the whole
-    # argument.
-    path="$complete"
-    arguments="EOL"
-    new_path=`$CYGPATH -u "$path"`
-    new_path=`$WHICH "$new_path" 2> /dev/null`
-    # bat and cmd files are not always considered executable in cygwin causing which
-    # to not find them
-    if test "x$new_path" = x \
-        && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
-        && test "x`$LS \"$path\" 2>/dev/null`" != x; then
-      new_path=`$CYGPATH -u "$path"`
-    fi
-    if test "x$new_path" = x; then
-      # It's still not found. Now this is an unrecoverable error.
-      { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJC, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of OBJC, which resolves as \"$complete\", is not found." >&6;}
-      has_space=`$ECHO "$complete" | $GREP " "`
-      if test "x$has_space" != x; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
-      fi
-      as_fn_error $? "Cannot locate the the path of OBJC" "$LINENO" 5
-    fi
-  fi
-
-  # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
-  # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
-  # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
-  # "foo.exe" is OK but "foo" is an error.
-  #
-  # This test is therefore slightly more accurate than "test -f" to check for file presence.
-  # It is also a way to make sure we got the proper file name for the real test later on.
-  test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
-  if test "x$test_shortpath" = x; then
-    # Short path failed, file does not exist as specified.
-    # Try adding .exe or .cmd
-    if test -f "${new_path}.exe"; then
-      input_to_shortpath="${new_path}.exe"
-    elif test -f "${new_path}.cmd"; then
-      input_to_shortpath="${new_path}.cmd"
-    else
-      { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJC, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of OBJC, which resolves as \"$new_path\", is invalid." >&6;}
-      { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
-      as_fn_error $? "Cannot locate the the path of OBJC" "$LINENO" 5
-    fi
-  else
-    input_to_shortpath="$new_path"
-  fi
-
-  # Call helper function which possibly converts this using DOS-style short mode.
-  # If so, the updated path is stored in $new_path.
-  new_path="$input_to_shortpath"
-
-  input_path="$input_to_shortpath"
-  # Check if we need to convert this using DOS-style short mode. If the path
-  # contains just simple characters, use it. Otherwise (spaces, weird characters),
-  # take no chances and rewrite it.
-  # Note: m4 eats our [], so we need to use [ and ] instead.
-  has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
-  if test "x$has_forbidden_chars" != x; then
-    # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
-    shortmode_path=`$CYGPATH -s -m -a "$input_path"`
-    path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
-    if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
-      # Going to short mode and back again did indeed matter. Since short mode is
-      # case insensitive, let's make it lowercase to improve readability.
-      shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-      # Now convert it back to Unix-stile (cygpath)
-      input_path=`$CYGPATH -u "$shortmode_path"`
-      new_path="$input_path"
-    fi
-  fi
-
-  test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
-  if test "x$test_cygdrive_prefix" = x; then
-    # As a simple fix, exclude /usr/bin since it's not a real path.
-    if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
-      # The path is in a Cygwin special directory (e.g. /home). We need this converted to
-      # a path prefixed by /cygdrive for fixpath to work.
-      new_path="$CYGWIN_ROOT_PATH$input_path"
-    fi
-  fi
-
-  # remove trailing .exe if any
-  new_path="${new_path/%.exe/}"
-
-    elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
-  # First separate the path from the arguments. This will split at the first
-  # space.
-  complete="$OBJC"
-  path="${complete%% *}"
-  tmp="$complete EOL"
-  arguments="${tmp#* }"
-
-  # Input might be given as Windows format, start by converting to
-  # unix format.
-  new_path="$path"
-
-  windows_path="$new_path"
-  if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-    unix_path=`$CYGPATH -u "$windows_path"`
-    new_path="$unix_path"
-  elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-    unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
-    new_path="$unix_path"
-  fi
-
-
-  # Now try to locate executable using which
-  new_path=`$WHICH "$new_path" 2> /dev/null`
-
-  if test "x$new_path" = x; then
-    # Oops. Which didn't find the executable.
-    # The splitting of arguments from the executable at a space might have been incorrect,
-    # since paths with space are more likely in Windows. Give it another try with the whole
-    # argument.
-    path="$complete"
-    arguments="EOL"
-    new_path="$path"
-
-  windows_path="$new_path"
-  if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-    unix_path=`$CYGPATH -u "$windows_path"`
-    new_path="$unix_path"
-  elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-    unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
-    new_path="$unix_path"
-  fi
-
-
-    new_path=`$WHICH "$new_path" 2> /dev/null`
-    # bat and cmd files are not always considered executable in MSYS causing which
-    # to not find them
-    if test "x$new_path" = x \
-        && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
-        && test "x`$LS \"$path\" 2>/dev/null`" != x; then
-      new_path="$path"
-
-  windows_path="$new_path"
-  if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-    unix_path=`$CYGPATH -u "$windows_path"`
-    new_path="$unix_path"
-  elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-    unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
-    new_path="$unix_path"
-  fi
-
-    fi
-
-    if test "x$new_path" = x; then
-      # It's still not found. Now this is an unrecoverable error.
-      { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJC, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of OBJC, which resolves as \"$complete\", is not found." >&6;}
-      has_space=`$ECHO "$complete" | $GREP " "`
-      if test "x$has_space" != x; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
-      fi
-      as_fn_error $? "Cannot locate the the path of OBJC" "$LINENO" 5
-    fi
-  fi
-
-  # Now new_path has a complete unix path to the binary
-  if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
-    # Keep paths in /bin as-is, but remove trailing .exe if any
-    new_path="${new_path/%.exe/}"
-    # Do not save /bin paths to all_fixpath_prefixes!
-  else
-    # Not in mixed or Windows style, start by that.
-    new_path=`cmd //c echo $new_path`
-
-  input_path="$new_path"
-  # Check if we need to convert this using DOS-style short mode. If the path
-  # contains just simple characters, use it. Otherwise (spaces, weird characters),
-  # take no chances and rewrite it.
-  # Note: m4 eats our [], so we need to use [ and ] instead.
-  has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
-  if test "x$has_forbidden_chars" != x; then
-    # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
-    new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-  fi
-
-    # Output is in $new_path
-
-  windows_path="$new_path"
-  if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-    unix_path=`$CYGPATH -u "$windows_path"`
-    new_path="$unix_path"
-  elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-    unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
-    new_path="$unix_path"
-  fi
-
-    # remove trailing .exe if any
-    new_path="${new_path/%.exe/}"
-
-    # Save the first 10 bytes of this path to the storage, so fixpath can work.
-    all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-  fi
-
-    else
-      # We're on a unix platform. Hooray! :)
-      # First separate the path from the arguments. This will split at the first
-      # space.
-      complete="$OBJC"
-      path="${complete%% *}"
-      tmp="$complete EOL"
-      arguments="${tmp#* }"
-
-      # Cannot rely on the command "which" here since it doesn't always work.
-      is_absolute_path=`$ECHO "$path" | $GREP ^/`
-      if test -z "$is_absolute_path"; then
-        # Path to executable is not absolute. Find it.
-        IFS_save="$IFS"
-        IFS=:
-        for p in $PATH; do
-          if test -f "$p/$path" && test -x "$p/$path"; then
-            new_path="$p/$path"
-            break
-          fi
-        done
-        IFS="$IFS_save"
-      else
-        # This is an absolute path, we can use it without further modifications.
-        new_path="$path"
-      fi
-
-      if test "x$new_path" = x; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJC, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of OBJC, which resolves as \"$complete\", is not found." >&6;}
-        has_space=`$ECHO "$complete" | $GREP " "`
-        if test "x$has_space" != x; then
-          { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
-        fi
-        as_fn_error $? "Cannot locate the the path of OBJC" "$LINENO" 5
-      fi
-    fi
-
-    # Now join together the path and the arguments once again
-    if test "x$arguments" != xEOL; then
-      new_complete="$new_path ${arguments% *}"
-    else
-      new_complete="$new_path"
-    fi
-
-    if test "x$complete" != "x$new_complete"; then
-      OBJC="$new_complete"
-      { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJC to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting OBJC to \"$new_complete\"" >&6;}
-    fi
-  fi
-
 
 
   # Publish this variable in the help.
@@ -34551,8 +33968,6 @@
     fi
   fi
 
-  else
-    OBJC=
   fi
 
   if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
@@ -39851,7 +39266,6 @@
   # This is necessary since AC_PROG_CC defaults CFLAGS to "-g -O2"
   CFLAGS="$ORG_CFLAGS"
   CXXFLAGS="$ORG_CXXFLAGS"
-  OBJCFLAGS="$ORG_OBJCFLAGS"
 
 
 # Finally do some processing after the detection phase

--- a/common/autoconf/spec.gmk.in	Tue Mar 03 08:48:21 2015 -0800
+++ b/common/autoconf/spec.gmk.in	Wed Mar 04 10:47:36 2015 +0100
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2014, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -342,9 +342,6 @@
 CXX:=@FIXPATH@ @CCACHE@ @CXX@
 #CXXFLAGS:=@CXXFLAGS@
 
-OBJC:=@CCACHE@ @OBJC@
-#OBJCFLAGS:=@OBJCFLAGS@
-
 CPP:=@FIXPATH@ @CPP@
 #CPPFLAGS:=@CPPFLAGS@
 

--- a/common/autoconf/toolchain.m4	Tue Mar 03 08:48:21 2015 -0800
+++ b/common/autoconf/toolchain.m4	Wed Mar 04 10:47:36 2015 +0100
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2014, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -188,7 +188,6 @@
   # Store the CFLAGS etc passed to the configure script.
   ORG_CFLAGS="$CFLAGS"
   ORG_CXXFLAGS="$CXXFLAGS"
-  ORG_OBJCFLAGS="$OBJCFLAGS"
 
   # On Windows, we need to detect the visual studio installation first.
   # This will change the PATH, but we need to keep that new PATH even
@@ -232,7 +231,6 @@
   # This is necessary since AC_PROG_CC defaults CFLAGS to "-g -O2"
   CFLAGS="$ORG_CFLAGS"
   CXXFLAGS="$ORG_CXXFLAGS"
-  OBJCFLAGS="$ORG_OBJCFLAGS"
 ])
 
 # Check if a compiler is of the toolchain type we expect, and save the version
@@ -541,12 +539,8 @@
 AC_DEFUN_ONCE([TOOLCHAIN_DETECT_TOOLCHAIN_EXTRA],
 [
   if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
-    AC_PROG_OBJC
-    BASIC_FIXUP_EXECUTABLE(OBJC)
     BASIC_PATH_PROGS(LIPO, lipo)
     BASIC_FIXUP_EXECUTABLE(LIPO)
-  else
-    OBJC=
   fi
 
   if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then

--- a/make/common/NativeCompilation.gmk	Tue Mar 03 08:48:21 2015 -0800
+++ b/make/common/NativeCompilation.gmk	Wed Mar 04 10:47:36 2015 +0100
@@ -82,8 +82,7 @@
   # param 5 = the c compiler
   # param 6 = the c++ flags to the compiler
   # param 7 = the c++ compiler
-  # param 8 = the objc compiler
-  # param 9 = the flags to the assembler
+  # param 8 = the flags to the assembler
 
   ifneq (,$$(filter %.c,$2))
     # Compile as a C file
@@ -91,17 +90,17 @@
     $1_$2_COMP=$5
     $1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
   else ifneq (,$$(filter %.m,$2))
-    # Compile as a objective-c file
+    # Compile as an Objective-C file
     $1_$2_FLAGS=-x objective-c $(CFLAGS_CCACHE) $4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
-    $1_$2_COMP=$8
+    $1_$2_COMP=$5
     $1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
   else ifneq (,$$(filter %.s,$2))
     # Compile as assembler file
-    $1_$2_FLAGS=$9 -DTHIS_FILE='"$$(<F)"'
+    $1_$2_FLAGS=$8 -DTHIS_FILE='"$$(<F)"'
     $1_$2_COMP=$(AS)
     $1_$2_DEP_FLAG:=
   else ifneq (,$$(filter %.cpp,$2)$$(filter %.mm,$2))
-    # Compile as a C++ file
+    # Compile as a C++ or Objective-C++ file
     $1_$2_FLAGS=$(CFLAGS_CCACHE) $6 $$($1_$(notdir $2)_CXXFLAGS) -DTHIS_FILE='"$$(<F)"' -c
     $1_$2_COMP=$7
     $1_$2_DEP_FLAG:=$(CXX_FLAG_DEPS)
@@ -324,9 +323,6 @@
   ifeq ($$($1_CXX),)
     $1_CXX:=$(CXX)
   endif
-  ifeq ($$($1_OBJC),)
-    $1_OBJC:=$(OBJC)
-  endif
 
   # Make sure the dirs exist.
   $$(call MakeDir,$$($1_OBJECT_DIR) $$($1_OUTPUT_DIR))
@@ -454,7 +450,7 @@
   # variables used in the call to add_native_source below.
   $1_COMPILE_VARDEPS := $$($1_CFLAGS) $$($1_EXTRA_CFLAGS) $(SYSROOT_CFLAGS) \
       $$($1_CXXFLAGS) $$($1_EXTRA_CXXFLAGS) \
-      $$($1_CC) $$($1_CXX) $$($1_OBJC) $$($1_ASFLAGS) \
+      $$($1_CC) $$($1_CXX) $$($1_ASFLAGS) \
       $$(foreach s, $$($1_SRCS), \
           $$($1_$$(notdir $$s)_CFLAGS) $$($1_$$(notdir $$s)_CXXFLAGS))
   $1_COMPILE_VARDEPS_FILE := $$(call DependOnVariable, $1_COMPILE_VARDEPS, \
@@ -466,7 +462,7 @@
           $$($1_CFLAGS) $$($1_EXTRA_CFLAGS) $(SYSROOT_CFLAGS), \
           $$($1_CC), \
           $$($1_CXXFLAGS) $$($1_EXTRA_CXXFLAGS) $(SYSROOT_CFLAGS), \
-          $$($1_CXX),$$($1_OBJC),$$($1_ASFLAGS))))
+          $$($1_CXX), $$($1_ASFLAGS))))
 
   # Setup rule for printing progress info when compiling source files.
   # This is a rough heuristic and may not always print accurate information.