--- a/common/autoconf/generated-configure.sh Fri Dec 14 14:19:36 2012 -0800
+++ b/common/autoconf/generated-configure.sh Wed Jul 05 18:32:40 2017 +0200
@@ -3674,7 +3674,7 @@
#CUSTOM_AUTOCONF_INCLUDE
# Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1355221914
+DATE_WHEN_GENERATED=1355849613
###############################################################################
#
@@ -8165,14 +8165,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving FOUND_MAKE (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving FOUND_MAKE (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving FOUND_MAKE (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving FOUND_MAKE (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -8182,21 +8194,20 @@
fi
as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
+ FOUND_MAKE="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
+ fi
fi
fi
@@ -8511,14 +8522,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving FOUND_MAKE (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving FOUND_MAKE (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving FOUND_MAKE (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving FOUND_MAKE (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -8528,21 +8551,20 @@
fi
as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
+ FOUND_MAKE="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
+ fi
fi
fi
@@ -8854,14 +8876,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving FOUND_MAKE (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving FOUND_MAKE (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving FOUND_MAKE (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving FOUND_MAKE (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -8871,21 +8905,20 @@
fi
as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
+ FOUND_MAKE="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
+ fi
fi
fi
@@ -9202,14 +9235,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving FOUND_MAKE (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving FOUND_MAKE (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving FOUND_MAKE (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving FOUND_MAKE (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -9219,21 +9264,20 @@
fi
as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
+ FOUND_MAKE="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
+ fi
fi
fi
@@ -9544,14 +9588,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving FOUND_MAKE (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving FOUND_MAKE (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving FOUND_MAKE (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving FOUND_MAKE (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -9561,21 +9617,20 @@
fi
as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
+ FOUND_MAKE="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
+ fi
fi
fi
@@ -16373,14 +16428,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving VS_ENV_CMD (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving VS_ENV_CMD (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving VS_ENV_CMD (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving VS_ENV_CMD (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of VS_ENV_CMD, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of VS_ENV_CMD, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -16390,21 +16457,20 @@
fi
as_fn_error $? "Cannot locate the the path of VS_ENV_CMD" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- VS_ENV_CMD="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting VS_ENV_CMD to \"$new_complete\"" >&5
+ VS_ENV_CMD="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting VS_ENV_CMD to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting VS_ENV_CMD to \"$new_complete\"" >&6;}
- fi
+ fi
# Lets extract the variables that are set by vcvarsall.bat/vsvars32.bat/vsvars64.bat
@@ -16962,14 +17028,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving BUILD_CC (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving BUILD_CC (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving BUILD_CC (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving BUILD_CC (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CC, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of BUILD_CC, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -16979,21 +17057,20 @@
fi
as_fn_error $? "Cannot locate the the path of BUILD_CC" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- BUILD_CC="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_CC to \"$new_complete\"" >&5
+ BUILD_CC="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_CC to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting BUILD_CC to \"$new_complete\"" >&6;}
- fi
+ fi
for ac_prog in cl CC g++
do
@@ -17262,14 +17339,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving BUILD_CXX (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving BUILD_CXX (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving BUILD_CXX (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving BUILD_CXX (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CXX, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of BUILD_CXX, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -17279,21 +17368,20 @@
fi
as_fn_error $? "Cannot locate the the path of BUILD_CXX" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- BUILD_CXX="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_CXX to \"$new_complete\"" >&5
+ BUILD_CXX="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_CXX to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting BUILD_CXX to \"$new_complete\"" >&6;}
- fi
+ fi
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
@@ -17557,14 +17645,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving BUILD_LD (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving BUILD_LD (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving BUILD_LD (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving BUILD_LD (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_LD, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of BUILD_LD, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -17574,21 +17674,20 @@
fi
as_fn_error $? "Cannot locate the the path of BUILD_LD" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- BUILD_LD="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_LD to \"$new_complete\"" >&5
+ BUILD_LD="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_LD to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting BUILD_LD to \"$new_complete\"" >&6;}
- fi
+ fi
fi
@@ -18144,14 +18243,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving CC (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving CC (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving CC (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving CC (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of CC, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of CC, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -18161,21 +18272,20 @@
fi
as_fn_error $? "Cannot locate the the path of CC" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- CC="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CC to \"$new_complete\"" >&5
+ CC="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CC to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting CC to \"$new_complete\"" >&6;}
- fi
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking resolved symbolic links for CC" >&5
$as_echo_n "checking resolved symbolic links for CC... " >&6; }
@@ -18569,14 +18679,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving PROPER_COMPILER_CC (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving PROPER_COMPILER_CC (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving PROPER_COMPILER_CC (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving PROPER_COMPILER_CC (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of PROPER_COMPILER_CC, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of PROPER_COMPILER_CC, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -18586,21 +18708,20 @@
fi
as_fn_error $? "Cannot locate the the path of PROPER_COMPILER_CC" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- PROPER_COMPILER_CC="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting PROPER_COMPILER_CC to \"$new_complete\"" >&5
+ PROPER_COMPILER_CC="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting PROPER_COMPILER_CC to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting PROPER_COMPILER_CC to \"$new_complete\"" >&6;}
- fi
+ fi
PATH="$RETRY_COMPILER_SAVED_PATH"
@@ -19691,14 +19812,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving CXX (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving CXX (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving CXX (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving CXX (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXX, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of CXX, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -19708,21 +19841,20 @@
fi
as_fn_error $? "Cannot locate the the path of CXX" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- CXX="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CXX to \"$new_complete\"" >&5
+ CXX="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CXX to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting CXX to \"$new_complete\"" >&6;}
- fi
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking resolved symbolic links for CXX" >&5
$as_echo_n "checking resolved symbolic links for CXX... " >&6; }
@@ -20116,14 +20248,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving PROPER_COMPILER_CXX (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving PROPER_COMPILER_CXX (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving PROPER_COMPILER_CXX (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving PROPER_COMPILER_CXX (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of PROPER_COMPILER_CXX, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of PROPER_COMPILER_CXX, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -20133,21 +20277,20 @@
fi
as_fn_error $? "Cannot locate the the path of PROPER_COMPILER_CXX" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- PROPER_COMPILER_CXX="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting PROPER_COMPILER_CXX to \"$new_complete\"" >&5
+ PROPER_COMPILER_CXX="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting PROPER_COMPILER_CXX to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting PROPER_COMPILER_CXX to \"$new_complete\"" >&6;}
- fi
+ fi
PATH="$RETRY_COMPILER_SAVED_PATH"
@@ -21006,14 +21149,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving OBJC (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving OBJC (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving OBJC (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving OBJC (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJC, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of OBJC, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -21023,21 +21178,20 @@
fi
as_fn_error $? "Cannot locate the the path of OBJC" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- OBJC="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJC to \"$new_complete\"" >&5
+ OBJC="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJC to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting OBJC to \"$new_complete\"" >&6;}
- fi
+ fi
else
OBJC=
@@ -21376,14 +21530,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving AR (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving AR (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving AR (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving AR (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of AR, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of AR, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -21393,21 +21559,20 @@
fi
as_fn_error $? "Cannot locate the the path of AR" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- AR="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting AR to \"$new_complete\"" >&5
+ AR="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting AR to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting AR to \"$new_complete\"" >&6;}
- fi
+ fi
fi
if test "x$OPENJDK_TARGET_OS" = xmacosx; then
@@ -21712,14 +21877,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving WINLD (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving WINLD (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving WINLD (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving WINLD (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of WINLD, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of WINLD, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -21729,21 +21906,20 @@
fi
as_fn_error $? "Cannot locate the the path of WINLD" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- WINLD="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting WINLD to \"$new_complete\"" >&5
+ WINLD="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting WINLD to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting WINLD to \"$new_complete\"" >&6;}
- fi
+ fi
printf "Windows linker was found at $WINLD\n"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the found link.exe is actually the Visual Studio linker" >&5
@@ -22038,14 +22214,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving MT (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving MT (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving MT (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving MT (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of MT, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of MT, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -22055,21 +22243,20 @@
fi
as_fn_error $? "Cannot locate the the path of MT" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- MT="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MT to \"$new_complete\"" >&5
+ MT="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MT to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting MT to \"$new_complete\"" >&6;}
- fi
+ fi
# The resource compiler
# Extract the first word of "rc", so it can be a program name with args.
@@ -22348,14 +22535,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving RC (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving RC (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving RC (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving RC (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of RC, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of RC, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -22365,21 +22564,20 @@
fi
as_fn_error $? "Cannot locate the the path of RC" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- RC="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting RC to \"$new_complete\"" >&5
+ RC="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting RC to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting RC to \"$new_complete\"" >&6;}
- fi
+ fi
# For hotspot, we need these in Windows mixed path,
@@ -22711,14 +22909,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving WINAR (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving WINAR (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving WINAR (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving WINAR (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of WINAR, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of WINAR, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -22728,21 +22938,20 @@
fi
as_fn_error $? "Cannot locate the the path of WINAR" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- WINAR="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting WINAR to \"$new_complete\"" >&5
+ WINAR="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting WINAR to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting WINAR to \"$new_complete\"" >&6;}
- fi
+ fi
AR="$WINAR"
ARFLAGS="-nologo -NODEFAULTLIB:MSVCRT"
@@ -23006,14 +23215,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving DUMPBIN (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving DUMPBIN (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving DUMPBIN (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving DUMPBIN (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of DUMPBIN, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of DUMPBIN, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -23023,21 +23244,20 @@
fi
as_fn_error $? "Cannot locate the the path of DUMPBIN" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- DUMPBIN="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting DUMPBIN to \"$new_complete\"" >&5
+ DUMPBIN="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting DUMPBIN to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting DUMPBIN to \"$new_complete\"" >&6;}
- fi
+ fi
COMPILER_TYPE=CL
@@ -23406,14 +23626,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving CPP (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving CPP (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving CPP (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving CPP (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of CPP, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of CPP, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -23423,21 +23655,20 @@
fi
as_fn_error $? "Cannot locate the the path of CPP" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- CPP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CPP to \"$new_complete\"" >&5
+ CPP="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CPP to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting CPP to \"$new_complete\"" >&6;}
- fi
+ fi
ac_ext=cpp
@@ -23795,14 +24026,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving CXXCPP (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving CXXCPP (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving CXXCPP (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving CXXCPP (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXXCPP, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of CXXCPP, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -23812,21 +24055,20 @@
fi
as_fn_error $? "Cannot locate the the path of CXXCPP" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- CXXCPP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CXXCPP to \"$new_complete\"" >&5
+ CXXCPP="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CXXCPP to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting CXXCPP to \"$new_complete\"" >&6;}
- fi
+ fi
if test "x$COMPILE_TYPE" != "xcross"; then
@@ -24113,14 +24355,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving AS (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving AS (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving AS (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving AS (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of AS, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of AS, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -24130,21 +24384,20 @@
fi
as_fn_error $? "Cannot locate the the path of AS" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- AS="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting AS to \"$new_complete\"" >&5
+ AS="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting AS to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting AS to \"$new_complete\"" >&6;}
- fi
+ fi
else
AS="$CC -c"
@@ -24419,14 +24672,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving NM (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving NM (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving NM (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving NM (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of NM, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -24436,21 +24701,20 @@
fi
as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- NM="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting NM to \"$new_complete\"" >&5
+ NM="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting NM to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting NM to \"$new_complete\"" >&6;}
- fi
+ fi
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
@@ -24714,14 +24978,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving STRIP (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving STRIP (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving STRIP (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving STRIP (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of STRIP, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -24731,21 +25007,20 @@
fi
as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- STRIP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting STRIP to \"$new_complete\"" >&5
+ STRIP="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting STRIP to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting STRIP to \"$new_complete\"" >&6;}
- fi
+ fi
# Extract the first word of "mcs", so it can be a program name with args.
set dummy mcs; ac_word=$2
@@ -25009,14 +25284,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving MCS (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving MCS (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving MCS (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving MCS (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of MCS, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of MCS, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -25026,21 +25313,20 @@
fi
as_fn_error $? "Cannot locate the the path of MCS" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- MCS="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MCS to \"$new_complete\"" >&5
+ MCS="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MCS to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting MCS to \"$new_complete\"" >&6;}
- fi
+ fi
elif test "x$OPENJDK_TARGET_OS" != xwindows; then
if test -n "$ac_tool_prefix"; then
@@ -25357,14 +25643,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving NM (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving NM (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving NM (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving NM (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of NM, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -25374,21 +25672,20 @@
fi
as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- NM="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting NM to \"$new_complete\"" >&5
+ NM="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting NM to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting NM to \"$new_complete\"" >&6;}
- fi
+ fi
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
@@ -25704,14 +26001,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving STRIP (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving STRIP (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving STRIP (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving STRIP (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of STRIP, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -25721,21 +26030,20 @@
fi
as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- STRIP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting STRIP to \"$new_complete\"" >&5
+ STRIP="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting STRIP to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting STRIP to \"$new_complete\"" >&6;}
- fi
+ fi
fi
@@ -26066,14 +26374,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving OBJCOPY (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving OBJCOPY (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving OBJCOPY (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving OBJCOPY (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJCOPY, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of OBJCOPY, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -26083,21 +26403,20 @@
fi
as_fn_error $? "Cannot locate the the path of OBJCOPY" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- OBJCOPY="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJCOPY to \"$new_complete\"" >&5
+ OBJCOPY="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJCOPY to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting OBJCOPY to \"$new_complete\"" >&6;}
- fi
+ fi
fi
fi
@@ -26426,14 +26745,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving OBJDUMP (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving OBJDUMP (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving OBJDUMP (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving OBJDUMP (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJDUMP, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of OBJDUMP, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -26443,21 +26774,20 @@
fi
as_fn_error $? "Cannot locate the the path of OBJDUMP" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- OBJDUMP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJDUMP to \"$new_complete\"" >&5
+ OBJDUMP="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJDUMP to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting OBJDUMP to \"$new_complete\"" >&6;}
- fi
+ fi
fi
@@ -26724,14 +27054,26 @@
tmp="$complete EOL"
arguments="${tmp#* }"
- new_path=`$WHICH $path 2> /dev/null`
- if test "x$new_path" = x; then
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test "x$is_absolute_path" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving LIPO (as $path) with 'which' failed, using $path directly." >&5
-$as_echo "$as_me: Resolving LIPO (as $path) with 'which' failed, using $path directly." >&6;}
- new_path="$path"
- else
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Resolving LIPO (as $path) failed, using $path directly." >&5
+$as_echo "$as_me: Resolving LIPO (as $path) failed, using $path directly." >&6;}
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of LIPO, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of LIPO, which resolves as \"$complete\", is not found." >&6;}
has_space=`$ECHO "$complete" | $GREP " "`
@@ -26741,21 +27083,20 @@
fi
as_fn_error $? "Cannot locate the the path of LIPO" "$LINENO" 5
fi
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- LIPO="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting LIPO to \"$new_complete\"" >&5
+ LIPO="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting LIPO to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting LIPO to \"$new_complete\"" >&6;}
- fi
+ fi
fi