--- a/common/autoconf/generated-configure.sh Thu Oct 29 16:30:02 2015 +0100
+++ b/common/autoconf/generated-configure.sh Thu Oct 29 17:11:55 2015 +0100
@@ -741,11 +741,11 @@
HOTSPOT_CXX
HOTSPOT_RC
HOTSPOT_MT
-BUILD_SYSROOT_LDFLAGS
-BUILD_SYSROOT_CFLAGS
BUILD_LD
BUILD_CXX
BUILD_CC
+BUILD_SYSROOT_LDFLAGS
+BUILD_SYSROOT_CFLAGS
ac_ct_OBJDUMP
OBJDUMP
ac_ct_OBJCOPY
@@ -1080,6 +1080,7 @@
with_extra_cxxflags
with_extra_ldflags
with_toolchain_version
+with_build_devkit
with_jtreg
enable_warnings_as_errors
enable_debug_symbols
@@ -1210,7 +1211,6 @@
OBJDUMP
BUILD_CC
BUILD_CXX
-BUILD_LD
JTREGEXE
XMKMF
FREETYPE_CFLAGS
@@ -1943,6 +1943,7 @@
the version of the toolchain to look for, use
'--help' to show possible values [platform
dependent]
+ --with-build-devkit Devkit to use for the build platform toolchain
--with-jtreg Regression Test Harness [probed]
--with-stdc++lib=<static>,<dynamic>,<default>
force linking of the C++ runtime on Linux to either
@@ -2093,7 +2094,6 @@
OBJDUMP Override default value for OBJDUMP
BUILD_CC Override default value for BUILD_CC
BUILD_CXX Override default value for BUILD_CXX
- BUILD_LD Override default value for BUILD_LD
JTREGEXE Override default value for JTREGEXE
XMKMF Path to xmkmf, Makefile generator for X Window System
FREETYPE_CFLAGS
@@ -3742,6 +3742,7 @@
# Setup the sysroot flags and add them to global CFLAGS and LDFLAGS so
# that configure can use them while detecting compilers.
# TOOLCHAIN_TYPE is available here.
+# Param 1 - Optional prefix to all variables. (e.g BUILD_)
@@ -4593,7 +4594,7 @@
#CUSTOM_AUTOCONF_INCLUDE
# Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1446132586
+DATE_WHEN_GENERATED=1446135011
###############################################################################
#
@@ -40109,11 +40110,254 @@
# path, otherwise we might pick up cross-compilers which don't use standard
# naming.
+ OLDPATH="$PATH"
+
+
+# Check whether --with-build-devkit was given.
+if test "${with_build_devkit+set}" = set; then :
+ withval=$with_build_devkit;
+fi
+
+ if test "x$with_build_devkit" = "xyes"; then
+ as_fn_error $? "--with-build-devkit must have a value" "$LINENO" 5
+ elif test -n "$with_build_devkit"; then
+ if test ! -d "$with_build_devkit"; then
+ as_fn_error $? "--with-build-devkit points to non existing dir: $with_build_devkit" "$LINENO" 5
+ else
+
+ # Only process if variable expands to non-empty
+
+ if test "x$with_build_devkit" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$with_build_devkit"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of with_build_devkit, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of with_build_devkit, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of with_build_devkit" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ with_build_devkit="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting with_build_devkit to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting with_build_devkit to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$with_build_devkit"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ with_build_devkit="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting with_build_devkit to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting with_build_devkit to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$with_build_devkit"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of with_build_devkit, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of with_build_devkit, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of with_build_devkit, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ with_build_devkit="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
+ BUILD_DEVKIT_ROOT="$with_build_devkit"
+ # Check for a meta data info file in the root of the devkit
+ if test -f "$BUILD_DEVKIT_ROOT/devkit.info"; then
+ # Process devkit.info so that existing devkit variables are not
+ # modified by this
+ $SED -e "s/^DEVKIT_/BUILD_DEVKIT_/g" \
+ -e "s/\$DEVKIT_ROOT/\$BUILD_DEVKIT_ROOT/g" \
+ -e "s/\$host/\$build/g" \
+ $BUILD_DEVKIT_ROOT/devkit.info \
+ > $CONFIGURESUPPORT_OUTPUTDIR/build-devkit.info
+ . $CONFIGURESUPPORT_OUTPUTDIR/build-devkit.info
+ # This potentially sets the following:
+ # A descriptive name of the devkit
+
+ if test "x$BUILD_DEVKIT_NAME" = x; then
+ eval BUILD_DEVKIT_NAME="\${BUILD_DEVKIT_NAME_${OPENJDK_TARGET_CPU}}"
+ fi
+
+ # Corresponds to --with-extra-path
+
+ if test "x$BUILD_DEVKIT_EXTRA_PATH" = x; then
+ eval BUILD_DEVKIT_EXTRA_PATH="\${BUILD_DEVKIT_EXTRA_PATH_${OPENJDK_TARGET_CPU}}"
+ fi
+
+ # Corresponds to --with-toolchain-path
+
+ if test "x$BUILD_DEVKIT_TOOLCHAIN_PATH" = x; then
+ eval BUILD_DEVKIT_TOOLCHAIN_PATH="\${BUILD_DEVKIT_TOOLCHAIN_PATH_${OPENJDK_TARGET_CPU}}"
+ fi
+
+ # Corresponds to --with-sysroot
+
+ if test "x$BUILD_DEVKIT_SYSROOT" = x; then
+ eval BUILD_DEVKIT_SYSROOT="\${BUILD_DEVKIT_SYSROOT_${OPENJDK_TARGET_CPU}}"
+ fi
+
+ # Skip the Window specific parts
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for build platform devkit" >&5
+$as_echo_n "checking for build platform devkit... " >&6; }
+ if test "x$BUILD_DEVKIT_NAME" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_DEVKIT_NAME in $BUILD_DEVKIT_ROOT" >&5
+$as_echo "$BUILD_DEVKIT_NAME in $BUILD_DEVKIT_ROOT" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_DEVKIT_ROOT" >&5
+$as_echo "$BUILD_DEVKIT_ROOT" >&6; }
+ fi
+
+ BUILD_SYSROOT="$BUILD_DEVKIT_SYSROOT"
+
+ if test "x$BUILD_SYSROOT" != "x"; then
+ if test "x$TOOLCHAIN_TYPE" = xsolstudio; then
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ # Solaris Studio does not have a concept of sysroot. Instead we must
+ # make sure the default include and lib dirs are appended to each
+ # compile and link command line.
+ BUILD_SYSROOT_CFLAGS="-I$BUILD_SYSROOT/usr/include"
+ BUILD_SYSROOT_LDFLAGS="-L$BUILD_SYSROOT/usr/lib$OPENJDK_TARGET_CPU_ISADIR \
+ -L$BUILD_SYSROOT/lib$OPENJDK_TARGET_CPU_ISADIR \
+ -L$BUILD_SYSROOT/usr/ccs/lib$OPENJDK_TARGET_CPU_ISADIR"
+ fi
+ elif test "x$TOOLCHAIN_TYPE" = xgcc; then
+ BUILD_SYSROOT_CFLAGS="--sysroot=$BUILD_SYSROOT"
+ BUILD_SYSROOT_LDFLAGS="--sysroot=$BUILD_SYSROOT"
+ elif test "x$TOOLCHAIN_TYPE" = xclang; then
+ BUILD_SYSROOT_CFLAGS="-isysroot $BUILD_SYSROOT"
+ BUILD_SYSROOT_LDFLAGS="-isysroot $BUILD_SYSROOT"
+ fi
+ # Propagate the sysroot args to hotspot
+ BUILD_LEGACY_EXTRA_CFLAGS="$BUILD_LEGACY_EXTRA_CFLAGS $BUILD_SYSROOT_CFLAGS"
+ BUILD_LEGACY_EXTRA_CXXFLAGS="$BUILD_LEGACY_EXTRA_CXXFLAGS $BUILD_SYSROOT_CFLAGS"
+ BUILD_LEGACY_EXTRA_LDFLAGS="$BUILD_LEGACY_EXTRA_LDFLAGS $BUILD_SYSROOT_LDFLAGS"
+ # The global CFLAGS and LDFLAGS variables need these for configure to function
+ BUILD_CFLAGS="$BUILD_CFLAGS $BUILD_SYSROOT_CFLAGS"
+ BUILD_CPPFLAGS="$BUILD_CPPFLAGS $BUILD_SYSROOT_CFLAGS"
+ BUILD_CXXFLAGS="$BUILD_CXXFLAGS $BUILD_SYSROOT_CFLAGS"
+ BUILD_LDFLAGS="$BUILD_LDFLAGS $BUILD_SYSROOT_LDFLAGS"
+ fi
+
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ # We also need -iframework<path>/System/Library/Frameworks
+ BUILD_SYSROOT_CFLAGS="$BUILD_SYSROOT_CFLAGS -iframework $BUILD_SYSROOT/System/Library/Frameworks"
+ BUILD_SYSROOT_LDFLAGS="$BUILD_SYSROOT_LDFLAGS -iframework $BUILD_SYSROOT/System/Library/Frameworks"
+ # These always need to be set, or we can't find the frameworks embedded in JavaVM.framework
+ # set this here so it doesn't have to be peppered throughout the forest
+ BUILD_SYSROOT_CFLAGS="$BUILD_SYSROOT_CFLAGS -F $BUILD_SYSROOT/System/Library/Frameworks/JavaVM.framework/Frameworks"
+ BUILD_SYSROOT_LDFLAGS="$BUILD_SYSROOT_LDFLAGS -F $BUILD_SYSROOT/System/Library/Frameworks/JavaVM.framework/Frameworks"
+ fi
+
+
+
+
+
+ # Fallback default of just /bin if DEVKIT_PATH is not defined
+ if test "x$BUILD_DEVKIT_TOOLCHAIN_PATH" = x; then
+ BUILD_DEVKIT_TOOLCHAIN_PATH="$BUILD_DEVKIT_ROOT/bin"
+ fi
+ PATH="$BUILD_DEVKIT_TOOLCHAIN_PATH:$BUILD_DEVKIT_EXTRA_PATH"
+ fi
+ fi
+
# FIXME: we should list the discovered compilers as an exclude pattern!
# If we do that, we can do this detection before POST_DETECTION, and still
# find the build compilers in the tools dir, if needed.
+
# Publish this variable in the help.
@@ -40309,6 +40553,12 @@
+ if test "x$BUILD_CC" = x; then
+ as_fn_error $? "Could not find required tool for BUILD_CC" "$LINENO" 5
+ fi
+
+
+
# Only process if variable expands to non-empty
if test "x$BUILD_CC" != x; then
@@ -40596,6 +40846,7 @@
+
# Publish this variable in the help.
@@ -40791,6 +41042,12 @@
+ if test "x$BUILD_CXX" = x; then
+ as_fn_error $? "Could not find required tool for BUILD_CXX" "$LINENO" 5
+ fi
+
+
+
# Only process if variable expands to non-empty
if test "x$BUILD_CXX" != x; then
@@ -41076,490 +41333,9 @@
fi
fi
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${BUILD_LD+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in ld
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_LD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_LD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_LD="$BUILD_LD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_LD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_LD=$ac_cv_path_BUILD_LD
-if test -n "$BUILD_LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_LD" >&5
-$as_echo "$BUILD_LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_LD" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !BUILD_LD! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!BUILD_LD!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xBUILD_LD" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of BUILD_LD from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of BUILD_LD from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in ld
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_LD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_LD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_LD="$BUILD_LD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_LD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_LD=$ac_cv_path_BUILD_LD
-if test -n "$BUILD_LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_LD" >&5
-$as_echo "$BUILD_LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_LD" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$BUILD_LD" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool BUILD_LD= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool BUILD_LD= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_LD" >&5
-$as_echo_n "checking for BUILD_LD... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$BUILD_LD"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool BUILD_LD=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool BUILD_LD=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_LD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_LD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_LD="$BUILD_LD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_LD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_LD=$ac_cv_path_BUILD_LD
-if test -n "$BUILD_LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_LD" >&5
-$as_echo "$BUILD_LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$BUILD_LD" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool BUILD_LD=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool BUILD_LD=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_LD" >&5
-$as_echo_n "checking for BUILD_LD... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool BUILD_LD=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$BUILD_LD" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_LD"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_LD, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_LD, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_LD" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_LD, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of BUILD_LD, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of BUILD_LD" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_LD"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_LD, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_LD, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_LD" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_LD"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_LD, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_LD, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_LD" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- BUILD_LD="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_LD to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting BUILD_LD to \"$new_complete\"" >&6;}
- fi
- fi
-
- BUILD_SYSROOT_CFLAGS=""
- BUILD_SYSROOT_LDFLAGS=""
+ BUILD_LD="$BUILD_CC"
+
+ PATH="$OLDPATH"
else
# If we are not cross compiling, use the normal target compilers for
# building the build platform executables.