--- a/make/Help.gmk Fri Oct 05 13:38:03 2018 -0700
+++ b/make/Help.gmk Fri Oct 05 16:14:28 2018 -0700
@@ -119,7 +119,7 @@
run-test-prebuilt:
@( cd $(topdir) && \
$(MAKE) --no-print-directory -r -R -I make/common/ -f make/RunTestsPrebuilt.gmk \
- run-test-prebuilt TEST="$(TEST)" )
+ run-test-prebuilt CUSTOM_MAKE_DIR=$(CUSTOM_MAKE_DIR) TEST="$(TEST)" )
ALL_GLOBAL_TARGETS := help print-configurations run-test-prebuilt
--- a/make/RunTests.gmk Fri Oct 05 13:38:03 2018 -0700
+++ b/make/RunTests.gmk Fri Oct 05 16:14:28 2018 -0700
@@ -45,7 +45,7 @@
endif
$(eval $(call ParseKeywordVariable, TEST_OPTS, \
- KEYWORDS := JOBS TIMEOUT, \
+ SINGLE_KEYWORDS := JOBS TIMEOUT_FACTOR GENERATE_CDS_ARCHIVE, \
STRING_KEYWORDS := VM_OPTIONS, \
))
@@ -104,22 +104,64 @@
GTEST_VARIANTS := $(strip $(patsubst $(TEST_IMAGE_DIR)/hotspot/gtest/%, %, $(GTEST_LAUNCHER_DIRS)))
################################################################################
+# Setup global test running parameters
+################################################################################
+
+# Each factor variable comes in 3 variants. The first one is reserved for users
+# to use on command line. The other two are for predifined configurations in JDL
+# and for machine specific configurations respectively.
+TEST_JOBS_FACTOR ?= 1
+TEST_JOBS_FACTOR_JDL ?= 1
+TEST_JOBS_FACTOR_MACHINE ?= 1
+
+ifeq ($(TEST_JOBS), 0)
+ # Concurrency based on min(cores / 2, 12) * TEST_JOBS_FACTOR
+ TEST_JOBS := $(shell $(AWK) \
+ 'BEGIN { \
+ c = $(NUM_CORES) / 2; \
+ if (c > 12) c = 12; \
+ c = c * $(TEST_JOBS_FACTOR); \
+ c = c * $(TEST_JOBS_FACTOR_JDL); \
+ c = c * $(TEST_JOBS_FACTOR_MACHINE); \
+ if (c < 1) c = 1; \
+ printf "%.0f", c; \
+ }')
+endif
+
+# Optionally create a CDS archive before running tests
+ifeq ($(TEST_OPTS_GENERATE_CDS_ARCHIVE), true)
+ CDS_ARCHIVE_FILE := $(TEST_RESULTS_DIR)/cds_archive.jsa
+
+ $(CDS_ARCHIVE_FILE): $(JDK_IMAGE_DIR)/release
+ $(call MakeTargetDir)
+ $(call ExecuteWithLog, $(CDS_ARCHIVE_FILE), \
+ $(FIXPATH) $(JDK_IMAGE_DIR)/bin/java -XX:+UnlockDiagnosticVMOptions \
+ -XX:SharedArchiveFile=$(CDS_ARCHIVE_FILE) -Xshare:dump \
+ )
+
+ CDS_VM_ARGS := -XX:+UnlockDiagnosticVMOptions -XX:SharedArchiveFile=$(CDS_ARCHIVE_FILE)
+ JTREG_OPTIONS += $(addprefix -vmoption:, $(CDS_VM_ARGS))
+ TEST_PREREQS += $(CDS_ARCHIVE_FILE)
+endif
+
+################################################################################
# Parse control variables
################################################################################
ifneq ($(TEST_OPTS), )
# Inform the user
$(info Running tests using TEST_OPTS control variable '$(TEST_OPTS)')
-
- $(eval $(call SetTestOpt,VM_OPTIONS,JTREG))
- $(eval $(call SetTestOpt,VM_OPTIONS,GTEST))
-
- $(eval $(call SetTestOpt,JOBS,JTREG))
- $(eval $(call SetTestOpt,TIMEOUT,JTREG))
endif
+$(eval $(call SetTestOpt,VM_OPTIONS,JTREG))
+$(eval $(call SetTestOpt,VM_OPTIONS,GTEST))
+
+$(eval $(call SetTestOpt,JOBS,JTREG))
+$(eval $(call SetTestOpt,TIMEOUT_FACTOR,JTREG))
+
$(eval $(call ParseKeywordVariable, JTREG, \
- KEYWORDS := JOBS TIMEOUT TEST_MODE ASSERT VERBOSE RETAIN MAX_MEM, \
+ SINGLE_KEYWORDS := JOBS TIMEOUT_FACTOR TEST_MODE ASSERT VERBOSE RETAIN MAX_MEM \
+ EXTRA_PROBLEM_LISTS KEYWORDS, \
STRING_KEYWORDS := OPTIONS JAVA_OPTIONS VM_OPTIONS, \
))
@@ -129,7 +171,7 @@
endif
$(eval $(call ParseKeywordVariable, GTEST, \
- KEYWORDS := REPEAT, \
+ SINGLE_KEYWORDS := REPEAT, \
STRING_KEYWORDS := OPTIONS VM_OPTIONS, \
))
@@ -143,17 +185,6 @@
# Component-specific Jtreg settings
################################################################################
-ifeq ($(TEST_JOBS), 0)
- # If TEST_JOBS is not specified, hotspot fallback default is
- # min(num_cores / 2, 12).
- hotspot_JTREG_JOBS := $(shell $(EXPR) $(NUM_CORES) / 2)
- ifeq ($(hotspot_JTREG_JOBS), 0)
- hotspot_JTREG_JOBS := 1
- else ifeq ($(shell $(EXPR) $(hotspot_JTREG_JOBS) \> 12), 1)
- hotspot_JTREG_JOBS := 12
- endif
-endif
-
hotspot_JTREG_MAX_MEM := 0
hotspot_JTREG_ASSERT := false
hotspot_JTREG_NATIVEPATH := $(TEST_IMAGE_DIR)/hotspot/jtreg/native
@@ -165,6 +196,8 @@
nashorn_JTREG_PROBLEM_LIST += $(TOPDIR)/test/nashorn/ProblemList.txt
hotspot_JTREG_PROBLEM_LIST += $(TOPDIR)/test/hotspot/jtreg/ProblemList.txt
+langtools_JTREG_MAX_MEM := 768m
+
################################################################################
# Parse test selection
#
@@ -368,15 +401,16 @@
$1_GTEST_REPEAT :=--gtest_repeat=$$(GTEST_REPEAT)
endif
- run-test-$1:
+ run-test-$1: $(TEST_PREREQS)
$$(call LogWarn)
$$(call LogWarn, Running test '$$($1_TEST)')
$$(call MakeDir, $$($1_TEST_RESULTS_DIR) $$($1_TEST_SUPPORT_DIR))
$$(call ExecuteWithLog, $$($1_TEST_SUPPORT_DIR)/gtest, \
$$(FIXPATH) $$(TEST_IMAGE_DIR)/hotspot/gtest/$$($1_VARIANT)/gtestLauncher \
- -jdk $(JDK_IMAGE_DIR) $$($1_GTEST_FILTER) \
- --gtest_output=xml:$$($1_TEST_RESULTS_DIR)/gtest.xml \
- $$($1_GTEST_REPEAT) $$(GTEST_OPTIONS) $$(GTEST_VM_OPTIONS) \
+ -jdk $(JDK_IMAGE_DIR) $$($1_GTEST_FILTER) \
+ --gtest_output=xml:$$($1_TEST_RESULTS_DIR)/gtest.xml \
+ $$($1_GTEST_REPEAT) $$(GTEST_OPTIONS) \
+ $$(CDS_VM_ARGS) $$(GTEST_VM_OPTIONS) \
> >($(TEE) $$($1_TEST_RESULTS_DIR)/gtest.txt) \
&& $$(ECHO) $$$$? > $$($1_EXITCODE) \
|| $$(ECHO) $$$$? > $$($1_EXITCODE) \
@@ -447,12 +481,11 @@
$1_TEST_NAME := $$(strip $$(patsubst jtreg:%, %, $$($1_TEST)))
- $1_COMPONENT := \
+ $1_TEST_ROOT := \
$$(strip $$(foreach root, $$(JTREG_TESTROOTS), \
- $$(if $$(filter $$(root)%, $$(JTREG_TOPDIR)/$$($1_TEST_NAME)), \
- $$(lastword $$(subst /, $$(SPACE), $$(root))) \
- ) \
+ $$(if $$(filter $$(root)%, $$(JTREG_TOPDIR)/$$($1_TEST_NAME)), $$(root)) \
))
+ $1_COMPONENT := $$(lastword $$(subst /, $$(SPACE), $$($1_TEST_ROOT)))
# This will work only as long as just hotspot has the additional "jtreg" directory
ifeq ($$($1_COMPONENT), jtreg)
$1_COMPONENT := hotspot
@@ -475,11 +508,12 @@
$$(eval $$(call SetJtregValue,$1,JTREG_BASIC_OPTIONS))
$$(eval $$(call SetJtregValue,$1,JTREG_PROBLEM_LIST))
+ # Only the problem list for the current test root should be used.
+ $1_JTREG_PROBLEM_LIST := $$(filter $$($1_TEST_ROOT)%, $$($1_JTREG_PROBLEM_LIST))
+
ifneq ($(TEST_JOBS), 0)
- # User has specified TEST_JOBS, use that as fallback default
$$(eval $$(call SetJtregValue,$1,JTREG_JOBS,$$(TEST_JOBS)))
else
- # Use JOBS as default (except for hotspot)
$$(eval $$(call SetJtregValue,$1,JTREG_JOBS,$$(JOBS)))
endif
@@ -487,7 +521,7 @@
# we may end up with a lot of JVM's
$1_JTREG_MAX_RAM_PERCENTAGE := $$(shell $$(EXPR) 25 / $$($1_JTREG_JOBS))
- JTREG_TIMEOUT ?= 4
+ JTREG_TIMEOUT_FACTOR ?= 4
JTREG_VERBOSE ?= fail,error,summary
JTREG_RETAIN ?= fail,error
@@ -498,10 +532,10 @@
$1_JTREG_BASIC_OPTIONS += -$$($1_JTREG_TEST_MODE) \
-verbose:$$(JTREG_VERBOSE) -retain:$$(JTREG_RETAIN) \
- -concurrency:$$($1_JTREG_JOBS) -timeoutFactor:$$(JTREG_TIMEOUT) \
+ -concurrency:$$($1_JTREG_JOBS) -timeoutFactor:$$(JTREG_TIMEOUT_FACTOR) \
-vmoption:-XX:MaxRAMPercentage=$$($1_JTREG_MAX_RAM_PERCENTAGE)
- $1_JTREG_BASIC_OPTIONS += -automatic -keywords:\!ignore -ignore:quiet
+ $1_JTREG_BASIC_OPTIONS += -automatic -ignore:quiet
# Make it possible to specify the JIB_DATA_DIR for tests using the
# JIB Artifact resolver
@@ -531,6 +565,14 @@
$1_JTREG_BASIC_OPTIONS += $$(addprefix -exclude:, $$($1_JTREG_PROBLEM_LIST))
endif
+ ifneq ($$(JTREG_EXTRA_PROBLEM_LISTS), )
+ # Accept both absolute paths as well as relative to the current test root.
+ $1_JTREG_BASIC_OPTIONS += $$(addprefix -exclude:, $$(wildcard \
+ $$(JTREG_EXTRA_PROBLEM_LISTS) \
+ $$(addprefix $$($1_TEST_ROOT)/, $$(JTREG_EXTRA_PROBLEM_LISTS)) \
+ ))
+ endif
+
ifneq ($$(JIB_HOME), )
$1_JTREG_BASIC_OPTIONS += -e:JIB_HOME=$$(JIB_HOME)
endif
@@ -541,10 +583,21 @@
$1_JTREG_LAUNCHER_OPTIONS += -Djava.library.path="$(JTREG_FAILURE_HANDLER_DIR)"
endif
+ ifneq ($$(JTREG_KEYWORDS), )
+ # The keywords string may contain problematic characters and may be quoted
+ # already when it arrives here. Remove any existing quotes and replace them
+ # with one set of single quotes.
+ $1_JTREG_KEYWORDS := \
+ $$(strip $$(patsubst $$(SQUOTE)%$$(SQUOTE),%,$$(patsubst $$(DQUOTE)%$$(DQUOTE),%,$$(JTREG_KEYWORDS))))
+ ifneq ($$($1_JTREG_KEYWORDS), )
+ $1_JTREG_BASIC_OPTIONS += -k:'$$($1_JTREG_KEYWORDS)'
+ endif
+ endif
+
clean-workdir-$1:
$$(RM) -r $$($1_TEST_SUPPORT_DIR)
- run-test-$1: clean-workdir-$1
+ run-test-$1: clean-workdir-$1 $(TEST_PREREQS)
$$(call LogWarn)
$$(call LogWarn, Running test '$$($1_TEST)')
$$(call MakeDir, $$($1_TEST_RESULTS_DIR) $$($1_TEST_SUPPORT_DIR))
@@ -631,7 +684,7 @@
$$(error Invalid special test specification: $$($1_TEST_NAME))
endif
- run-test-$1:
+ run-test-$1: $(TEST_PREREQS)
$$(call LogWarn)
$$(call LogWarn, Running test '$$($1_TEST)')
$$(call MakeDir, $$($1_TEST_RESULTS_DIR) $$($1_TEST_SUPPORT_DIR))
--- a/make/RunTestsPrebuilt.gmk Fri Oct 05 13:38:03 2018 -0700
+++ b/make/RunTestsPrebuilt.gmk Fri Oct 05 16:14:28 2018 -0700
@@ -49,10 +49,11 @@
# given.
# Note: No spaces are allowed around the arguments.
#
-# $1: The name of the argument
+# $1: The name of the variable
# $2: The default value, if any, or OPTIONAL (do not provide a default but
# do not exit if it is missing)
# $3: If NO_CHECK, disable checking for target file/directory existence
+# If MKDIR, create the default directory
define SetupVariable
ifeq ($$($1), )
ifeq ($2, )
@@ -75,10 +76,17 @@
endif
# If $1 has a value (is not optional), and $3 is not set (to NO_CHECK),
# and if wildcard is empty, then complain that the file is missing.
- ifeq ($$(strip $$(if $$($1), , OPTIONAL) $$(wildcard $$($1)) $3), )
- $$(info Error: Prebuilt variable $1 points to missing file/directory:)
- $$(info '$$($1)')
- $$(error Cannot continue.)
+ ifeq ($3, MKDIR)
+ ifneq ($$(findstring $$(LOG), info debug trace), )
+ $$(info Creating directory for $1)
+ endif
+ $$(shell mkdir -p $$($1))
+ else ifneq ($3, NO_CHECK)
+ ifeq ($$(strip $$(if $$($1), , OPTIONAL) $$(wildcard $$($1))), )
+ $$(info Error: Prebuilt variable $1 points to missing file/directory:)
+ $$(info '$$($1)')
+ $$(error Cannot continue.)
+ endif
endif
endef
@@ -106,14 +114,14 @@
# Verify that user has given correct additional input.
# These variables are absolutely necessary
-$(eval $(call SetupVariable,OUTPUTDIR))
+$(eval $(call SetupVariable,OUTPUTDIR,$(TOPDIR)/build/run-test-prebuilt,MKDIR))
$(eval $(call SetupVariable,BOOT_JDK))
$(eval $(call SetupVariable,JT_HOME))
# These can have default values based on the ones above
$(eval $(call SetupVariable,JDK_IMAGE_DIR,$(OUTPUTDIR)/images/jdk))
$(eval $(call SetupVariable,TEST_IMAGE_DIR,$(OUTPUTDIR)/images/test))
-$(eval $(call SetupVariable,SYMBOLS_IMAGE_DIR,$(OUTPUTDIR)/images/symbols))
+$(eval $(call SetupVariable,SYMBOLS_IMAGE_DIR,$(OUTPUTDIR)/images/symbols,NO_CHECK))
# Provide default values for tools that we need
$(eval $(call SetupVariable,MAKE,make,NO_CHECK))
@@ -202,8 +210,8 @@
ifeq ($(OPENJDK_TARGET_OS), windows)
ifeq ($(wildcard $(TEST_IMAGE_DIR)/bin/fixpath.exe), )
- $$(info Error: fixpath is missing from test image '$(TEST_IMAGE_DIR)')
- $$(error Cannot continue.)
+ $(info Error: fixpath is missing from test image '$(TEST_IMAGE_DIR)')
+ $(error Cannot continue.)
endif
FIXPATH := $(TEST_IMAGE_DIR)/bin/fixpath.exe -c
PATH_SEP:=;
@@ -214,15 +222,17 @@
# Check number of cores
ifeq ($(OPENJDK_TARGET_OS), linux)
- NUM_CORES := $(shell $(CAT) /proc/cpuinfo | $(GREP) -c processor)
+ NUM_CORES := $(shell $(CAT) /proc/cpuinfo | $(GREP) -c processor)
else ifeq ($(OPENJDK_TARGET_OS), macosx)
- NUM_CORES := $(shell /usr/sbin/sysctl -n hw.ncpu)
+ NUM_CORES := $(shell /usr/sbin/sysctl -n hw.ncpu)
else ifeq ($(OPENJDK_TARGET_OS), solaris)
- NUM_CORES := $(shell LC_MESSAGES=C /usr/sbin/psrinfo -v | $(GREP) -c on-line)
+ NUM_CORES := $(shell LC_MESSAGES=C /usr/sbin/psrinfo -v | $(GREP) -c on-line)
else ifeq ($(OPENJDK_TARGET_OS), windows)
- NUM_CORES := $(NUMBER_OF_PROCESSORS)
-else
- NUM_CORES := 1
+ NUM_CORES := $(NUMBER_OF_PROCESSORS)
+endif
+ifeq ($(NUM_CORES), )
+ $(warn Could not find number of CPUs, assuming 1)
+ NUM_CORES := 1
endif
################################################################################
@@ -276,9 +286,6 @@
@$(RM) -f $(MAKESUPPORT_OUTPUTDIR)/exit-with-error
@cd $(TOPDIR) && $(MAKE) $(MAKE_ARGS) -f make/RunTests.gmk run-test \
TEST="$(TEST)"
- @if test -f $(MAKESUPPORT_OUTPUTDIR)/exit-with-error ; then \
- exit 1 ; \
- fi
all: run-test-prebuilt
--- a/make/RunTestsPrebuiltSpec.gmk Fri Oct 05 13:38:03 2018 -0700
+++ b/make/RunTestsPrebuiltSpec.gmk Fri Oct 05 16:14:28 2018 -0700
@@ -172,3 +172,13 @@
EXPR := expr
FILE := file
HG := hg
+
+# On Solaris gnu versions of some tools are required.
+ifeq ($(OPENJDK_BUILD_OS), solaris)
+ AWK := gawk
+ GREP := ggrep
+ EGREP := ggrep -E
+ FGREP := grep -F
+ SED := gsed
+ TAR := gtar
+endif
--- a/make/common/MakeBase.gmk Fri Oct 05 13:38:03 2018 -0700
+++ b/make/common/MakeBase.gmk Fri Oct 05 16:14:28 2018 -0700
@@ -842,7 +842,7 @@
# Parameter 1 is the name of the rule, and is also the name of the variable.
#
# Remaining parameters are named arguments. These include:
-# KEYWORDS A list of valid keywords
+# SINGLE_KEYWORDS A list of valid keywords with single string values
# STRING_KEYWORDS A list of valid keywords, processed as string. This means
# that '%20' will be replaced by ' ' to allow for multi-word strings.
#
@@ -856,7 +856,7 @@
$$(eval mangled_part_eval := $$(call DoubleDollar, $$(mangled_part))) \
$$(eval part := $$$$(subst ||||,$$$$(SPACE),$$$$(mangled_part_eval))) \
$$(eval $1_NO_MATCH := true) \
- $$(foreach keyword, $$($1_KEYWORDS), \
+ $$(foreach keyword, $$($1_SINGLE_KEYWORDS), \
$$(eval keyword_eval := $$(call DoubleDollar, $$(keyword))) \
$$(if $$(filter $$(keyword)=%, $$(part)), \
$$(eval $(strip $1)_$$$$(keyword_eval) := $$$$(strip $$$$(patsubst $$$$(keyword_eval)=%, %, $$$$(part)))) \
@@ -871,11 +871,11 @@
) \
) \
$$(if $$($1_NO_MATCH), \
- $$(if $$(filter $$(part), $$($1_KEYWORDS) $$($1_STRING_KEYWORDS)), \
+ $$(if $$(filter $$(part), $$($1_SINGLE_KEYWORDS) $$($1_STRING_KEYWORDS)), \
$$(info Keyword $$(part) for $1 needs to be assigned a value.) \
, \
$$(info $$(part) is not a valid keyword for $1.) \
- $$(info Valid keywords: $$($1_KEYWORDS) $$($1_STRING_KEYWORDS).) \
+ $$(info Valid keywords: $$($1_SINGLE_KEYWORDS) $$($1_STRING_KEYWORDS).) \
) \
$$(error Cannot continue) \
) \
--- a/make/conf/jib-profiles.js Fri Oct 05 13:38:03 2018 -0700
+++ b/make/conf/jib-profiles.js Fri Oct 05 16:14:28 2018 -0700
@@ -755,16 +755,15 @@
"run-test-prebuilt": {
target_os: input.build_os,
target_cpu: input.build_cpu,
- src: "src.conf",
dependencies: [ "jtreg", "gnumake", "boot_jdk", "jib", testedProfile + ".jdk",
- testedProfile + ".test", "src.full"
+ testedProfile + ".test"
],
- work_dir: input.get("src.full", "install_path") + "/test",
+ src: "src.conf",
+ make_args: [ "run-test-prebuilt", "LOG_CMDLINES=true" ],
environment: {
- "JT_JAVA": common.boot_jdk_home,
- "PRODUCT_HOME": input.get(testedProfile + ".jdk", "home_path"),
- "TEST_IMAGE_DIR": input.get(testedProfile + ".test", "home_path"),
- "TEST_OUTPUT_DIR": input.src_top_dir
+ "BOOT_JDK": common.boot_jdk_home,
+ "JDK_IMAGE_DIR": input.get(testedProfile + ".jdk", "home_path"),
+ "TEST_IMAGE_DIR": input.get(testedProfile + ".test", "home_path")
},
labels: "test"
}
@@ -809,6 +808,27 @@
windowsRunTestPrebuiltExtra);
}
+ // The profile run-test-prebuilt defines src.conf as the src bundle. When
+ // running in Mach 5, this reduces the time it takes to populate the
+ // considerably. But with just src.conf, we cannot actually run any tests,
+ // so if running from a workspace with just src.conf in it, we need to also
+ // get src.full as a dependency, and define the work_dir (where make gets
+ // run) to be in the src.full install path. By running in the install path,
+ // the same cached installation of the full src can be reused for multiple
+ // test tasks. Care must however be taken not to polute that work dir by
+ // setting the appropriate make variables to control output directories.
+ //
+ // Use the existance of the top level README as indication of if this is
+ // the full source or just src.conf.
+ if (!new java.io.File(__DIR__, "../../README").exists()) {
+ var runTestPrebuiltSrcFullExtra = {
+ dependencies: "src.full",
+ work_dir: input.get("src.full", "install_path"),
+ }
+ profiles["run-test-prebuilt"] = concatObjects(profiles["run-test-prebuilt"],
+ runTestPrebuiltSrcFullExtra);
+ }
+
// Generate the missing platform attributes
profiles = generatePlatformAttributes(profiles);
profiles = generateDefaultMakeTargetsConfigureArg(common, profiles);