Merge
authorduke
Wed, 05 Jul 2017 19:43:34 +0200
changeset 24717 48f4995c3bc5
parent 24716 51596e763410 (current diff)
parent 24715 67f8ba8e7841 (diff)
child 24786 1e0e90ccab86
Merge
hotspot/test/runtime/6929067/T.java
hotspot/test/runtime/6929067/Test6929067.sh
hotspot/test/runtime/6929067/invoke.c
hotspot/test/runtime/InitialThreadOverflow/DoOverflow.java
hotspot/test/runtime/InitialThreadOverflow/invoke.c
hotspot/test/runtime/InitialThreadOverflow/testme.sh
jdk/src/share/native/java/util/zip/zlib-1.2.5/ChangeLog
jdk/src/share/native/java/util/zip/zlib-1.2.5/README
jdk/src/share/native/java/util/zip/zlib-1.2.5/compress.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/crc32.h
jdk/src/share/native/java/util/zip/zlib-1.2.5/deflate.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/deflate.h
jdk/src/share/native/java/util/zip/zlib-1.2.5/gzclose.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/gzguts.h
jdk/src/share/native/java/util/zip/zlib-1.2.5/gzlib.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/gzread.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/gzwrite.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/infback.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/inffast.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/inffast.h
jdk/src/share/native/java/util/zip/zlib-1.2.5/inffixed.h
jdk/src/share/native/java/util/zip/zlib-1.2.5/inflate.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/inflate.h
jdk/src/share/native/java/util/zip/zlib-1.2.5/inftrees.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/inftrees.h
jdk/src/share/native/java/util/zip/zlib-1.2.5/patches/ChangeLog_java
jdk/src/share/native/java/util/zip/zlib-1.2.5/trees.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/trees.h
jdk/src/share/native/java/util/zip/zlib-1.2.5/uncompr.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/zadler32.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/zconf.h
jdk/src/share/native/java/util/zip/zlib-1.2.5/zcrc32.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/zlib.h
jdk/src/share/native/java/util/zip/zlib-1.2.5/zutil.c
jdk/src/share/native/java/util/zip/zlib-1.2.5/zutil.h
jdk/test/demo/jvmti/mtrace/JFrameCreateTime.java
jdk/test/demo/jvmti/mtrace/TraceJFrame.java
--- a/.hgtags-top-repo	Wed Jun 04 20:20:02 2014 -0700
+++ b/.hgtags-top-repo	Wed Jul 05 19:43:34 2017 +0200
@@ -258,3 +258,4 @@
 5800456add07e1a68170a229fb5e27376f8875e5 jdk9-b13
 4e3aa9723e9972623e3dafc321b368e7db7e9b3b jdk9-b14
 b114474fb25af4e73cb7219f7c04bd8994da03a5 jdk9-b15
+cf22a728521f91a4692b433d39d730a0a1b23155 jdk9-b16
--- a/common/autoconf/configure	Wed Jun 04 20:20:02 2014 -0700
+++ b/common/autoconf/configure	Wed Jul 05 19:43:34 2017 +0200
@@ -49,7 +49,7 @@
 ###
 
 run_autogen_or_fail() {
-  if test "x`which autoconf 2> /dev/null`" = x; then
+  if test "x`which autoconf 2> /dev/null | grep -v '^no autoconf in'`" = x; then
     echo "Cannot locate autoconf, unable to correct situation."
     echo "Please install autoconf and run 'bash autogen.sh' to update the generated files."
     echo "Error: Cannot continue" 1>&2
@@ -80,7 +80,7 @@
 }
 
 check_hg_updates() {
-  if test "x`which hg 2> /dev/null`" != x; then
+  if test "x`which hg 2> /dev/null | grep -v '^no hg in'`" != x; then
     conf_updated_autoconf_files=`cd $conf_script_dir && hg status -mard 2> /dev/null | grep autoconf`
     if test "x$conf_updated_autoconf_files" != x; then
       echo "Configure source code has been updated, checking time stamps"
--- a/hotspot/.hgtags	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/.hgtags	Wed Jul 05 19:43:34 2017 +0200
@@ -418,3 +418,4 @@
 456ad9c99133803d4e1433124c85a6fd141b9ac9 jdk9-b13
 bd333491bb6c012d7b606939406d0fa9a5ac7ffd jdk9-b14
 170f6d733d7aec062f743a6b8c1cce940a7a984a jdk9-b15
+b14e7c0b7d3ec04127f565cda1d84122e205680c jdk9-b16
--- a/hotspot/src/cpu/sparc/vm/c1_LIRGenerator_sparc.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/cpu/sparc/vm/c1_LIRGenerator_sparc.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -1221,10 +1221,8 @@
   bool is_obj = (type == T_ARRAY || type == T_OBJECT);
   LIR_Opr offset = off.result();
 
-  if (data != dst) {
-    __ move(data, dst);
-    data = dst;
-  }
+  // Because we want a 2-arg form of xchg
+  __ move(data, dst);
 
   assert (!x->is_add() && (type == T_INT || (is_obj LP64_ONLY(&& UseCompressedOops))), "unexpected type");
   LIR_Address* addr;
@@ -1254,7 +1252,7 @@
     pre_barrier(ptr, LIR_OprFact::illegalOpr /* pre_val */,
                 true /* do_load */, false /* patch */, NULL);
   }
-  __ xchg(LIR_OprFact::address(addr), data, dst, tmp);
+  __ xchg(LIR_OprFact::address(addr), dst, dst, tmp);
   if (is_obj) {
     // Seems to be a precise address
     post_barrier(ptr, data);
--- a/hotspot/src/cpu/sparc/vm/copy_sparc.hpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/cpu/sparc/vm/copy_sparc.hpp	Wed Jul 05 19:43:34 2017 +0200
@@ -184,7 +184,7 @@
   assert(MinObjAlignmentInBytes >= BytesPerLong, "need alternate implementation");
 
   if (value == 0 && UseBlockZeroing &&
-      (count > (BlockZeroingLowLimit >> LogHeapWordSize))) {
+      (count > (size_t)(BlockZeroingLowLimit >> LogHeapWordSize))) {
    // Call it only when block zeroing is used
    ((_zero_Fn)StubRoutines::zero_aligned_words())(tohw, count);
   } else {
--- a/hotspot/src/share/tools/LogCompilation/src/com/sun/hotspot/tools/compiler/CallSite.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/tools/LogCompilation/src/com/sun/hotspot/tools/compiler/CallSite.java	Wed Jul 05 19:43:34 2017 +0200
@@ -231,6 +231,9 @@
         // identical call sites with the same method name/bci are
         // possible so we have to try them all until we find the late
         // inline call site that has a matching inline id.
+        if (calls == null) {
+            return null;
+        }
         CallSite site = sites.pop();
         for (CallSite c : calls) {
             if (c.matches(site)) {
@@ -250,6 +253,27 @@
         return null;
     }
 
+    public ArrayDeque<CallSite> findCallSite2(CallSite site) {
+        if (calls == null) {
+            return null;
+        }
+
+        for (CallSite c : calls) {
+            if (c.matches(site)) {
+                ArrayDeque<CallSite> stack = new ArrayDeque<CallSite>();
+                stack.push(c);
+                return stack;
+            } else {
+                ArrayDeque<CallSite> stack = c.findCallSite2(site);
+                if (stack != null) {
+                    stack.push(c);
+                    return stack;
+                }
+            }
+        }
+        return null;
+    }
+
     public long getInlineId() {
         return inlineId;
     }
--- a/hotspot/src/share/tools/LogCompilation/src/com/sun/hotspot/tools/compiler/Compilation.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/tools/LogCompilation/src/com/sun/hotspot/tools/compiler/Compilation.java	Wed Jul 05 19:43:34 2017 +0200
@@ -49,6 +49,12 @@
         this.id = id;
     }
 
+    void reset() {
+        call = new CallSite();
+        lateInlineCall = new CallSite();
+        phases = new ArrayList<Phase>(4);
+    }
+
     Phase getPhase(String s) {
         for (Phase p : getPhases()) {
             if (p.getName().equals(s)) {
@@ -212,10 +218,6 @@
         return phases;
     }
 
-    public void setPhases(ArrayList<Phase> phases) {
-        this.setPhases(phases);
-    }
-
     public String getFailureReason() {
         return failureReason;
     }
@@ -240,10 +242,6 @@
         return call;
     }
 
-    public void setCall(CallSite call) {
-        this.call = call;
-    }
-
     public CallSite getLateInlineCall() {
         return lateInlineCall;
     }
--- a/hotspot/src/share/tools/LogCompilation/src/com/sun/hotspot/tools/compiler/LogParser.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/tools/LogCompilation/src/com/sun/hotspot/tools/compiler/LogParser.java	Wed Jul 05 19:43:34 2017 +0200
@@ -395,6 +395,7 @@
             compile.setEnd(Double.parseDouble(search(atts, "stamp")));
             if (Integer.parseInt(search(atts, "success")) == 0) {
                 compile.setFailureReason(failureReason);
+                failureReason = null;
             }
         } else if (qname.equals("make_not_entrant")) {
             String id = makeId(atts);
@@ -451,6 +452,12 @@
             nmethods.put(id, nm);
             events.add(nm);
         } else if (qname.equals("parse")) {
+            if (failureReason != null && scopes.size() == 0 && !lateInlining) {
+                failureReason = null;
+                compile.reset();
+                site = compile.getCall();
+            }
+
             if (methodHandleSite != null) {
                 throw new InternalError("method handle site should have been replaced");
             }
@@ -529,6 +536,18 @@
 
             site = compile.getCall().findCallSite(thisCallScopes);
             if (site == null) {
+                System.out.println("call scopes:");
+                for (CallSite c : thisCallScopes) {
+                    System.out.println(c.getMethod() + " " + c.getBci() + " " + c.getInlineId());
+                }
+                CallSite c = thisCallScopes.getLast();
+                if (c.getInlineId() != 0) {
+                    System.out.println("Looking for call site in entire tree:");
+                    ArrayDeque<CallSite> stack = compile.getCall().findCallSite2(c);
+                    for (CallSite c2 : stack) {
+                        System.out.println(c2.getMethod() + " " + c2.getBci() + " " + c2.getInlineId());
+                    }
+                }
                 System.out.println(caller.getMethod() + " bci: " + bci);
                 throw new InternalError("couldn't find call site");
             }
--- a/hotspot/src/share/vm/c1/c1_LIR.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/c1/c1_LIR.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -1083,7 +1083,7 @@
 
 void LIR_OpArrayCopy::emit_code(LIR_Assembler* masm) {
   masm->emit_arraycopy(this);
-  masm->emit_code_stub(stub());
+  masm->append_code_stub(stub());
 }
 
 void LIR_OpUpdateCRC32::emit_code(LIR_Assembler* masm) {
@@ -1100,20 +1100,20 @@
 
 void LIR_OpAllocObj::emit_code(LIR_Assembler* masm) {
   masm->emit_alloc_obj(this);
-  masm->emit_code_stub(stub());
+  masm->append_code_stub(stub());
 }
 
 void LIR_OpBranch::emit_code(LIR_Assembler* masm) {
   masm->emit_opBranch(this);
   if (stub()) {
-    masm->emit_code_stub(stub());
+    masm->append_code_stub(stub());
   }
 }
 
 void LIR_OpConvert::emit_code(LIR_Assembler* masm) {
   masm->emit_opConvert(this);
   if (stub() != NULL) {
-    masm->emit_code_stub(stub());
+    masm->append_code_stub(stub());
   }
 }
 
@@ -1123,13 +1123,13 @@
 
 void LIR_OpAllocArray::emit_code(LIR_Assembler* masm) {
   masm->emit_alloc_array(this);
-  masm->emit_code_stub(stub());
+  masm->append_code_stub(stub());
 }
 
 void LIR_OpTypeCheck::emit_code(LIR_Assembler* masm) {
   masm->emit_opTypeCheck(this);
   if (stub()) {
-    masm->emit_code_stub(stub());
+    masm->append_code_stub(stub());
   }
 }
 
@@ -1144,7 +1144,7 @@
 void LIR_OpLock::emit_code(LIR_Assembler* masm) {
   masm->emit_lock(this);
   if (stub()) {
-    masm->emit_code_stub(stub());
+    masm->append_code_stub(stub());
   }
 }
 
--- a/hotspot/src/share/vm/c1/c1_LIR.hpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/c1/c1_LIR.hpp	Wed Jul 05 19:43:34 2017 +0200
@@ -1127,6 +1127,7 @@
   virtual void print_instr(outputStream* out) const   = 0;
   virtual void print_on(outputStream* st) const PRODUCT_RETURN;
 
+  virtual bool is_patching() { return false; }
   virtual LIR_OpCall* as_OpCall() { return NULL; }
   virtual LIR_OpJavaCall* as_OpJavaCall() { return NULL; }
   virtual LIR_OpLabel* as_OpLabel() { return NULL; }
@@ -1387,6 +1388,7 @@
     return (LIR_MoveKind)_flags;
   }
 
+  virtual bool is_patching() { return _patch != lir_patch_none; }
   virtual void emit_code(LIR_Assembler* masm);
   virtual LIR_Op1* as_Op1() { return this; }
   virtual const char * name() const PRODUCT_RETURN0;
@@ -1619,6 +1621,7 @@
   int       profiled_bci() const                 { return _profiled_bci;      }
   bool      should_profile() const               { return _should_profile;    }
 
+  virtual bool is_patching() { return _info_for_patch != NULL; }
   virtual void emit_code(LIR_Assembler* masm);
   virtual LIR_OpTypeCheck* as_OpTypeCheck() { return this; }
   void print_instr(outputStream* out) const PRODUCT_RETURN;
--- a/hotspot/src/share/vm/c1/c1_LIRAssembler.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/c1/c1_LIRAssembler.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -58,7 +58,7 @@
     _masm->nop();
   }
   patch->install(_masm, patch_code, obj, info);
-  append_patching_stub(patch);
+  append_code_stub(patch);
 
 #ifdef ASSERT
   Bytecodes::Code code = info->scope()->method()->java_code_at_bci(info->stack()->bci());
@@ -131,11 +131,6 @@
 }
 
 
-void LIR_Assembler::append_patching_stub(PatchingStub* stub) {
-  _slow_case_stubs->append(stub);
-}
-
-
 void LIR_Assembler::check_codespace() {
   CodeSection* cs = _masm->code_section();
   if (cs->remaining() < (int)(NOT_LP64(1*K)LP64_ONLY(2*K))) {
@@ -144,7 +139,7 @@
 }
 
 
-void LIR_Assembler::emit_code_stub(CodeStub* stub) {
+void LIR_Assembler::append_code_stub(CodeStub* stub) {
   _slow_case_stubs->append(stub);
 }
 
@@ -442,7 +437,7 @@
 
 void LIR_Assembler::add_debug_info_for_null_check(int pc_offset, CodeEmitInfo* cinfo) {
   ImplicitNullCheckStub* stub = new ImplicitNullCheckStub(pc_offset, cinfo);
-  emit_code_stub(stub);
+  append_code_stub(stub);
 }
 
 void LIR_Assembler::add_debug_info_for_div0_here(CodeEmitInfo* info) {
@@ -451,7 +446,7 @@
 
 void LIR_Assembler::add_debug_info_for_div0(int pc_offset, CodeEmitInfo* cinfo) {
   DivByZeroStub* stub = new DivByZeroStub(pc_offset, cinfo);
-  emit_code_stub(stub);
+  append_code_stub(stub);
 }
 
 void LIR_Assembler::emit_rtcall(LIR_OpRTCall* op) {
--- a/hotspot/src/share/vm/c1/c1_LIRAssembler.hpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/c1/c1_LIRAssembler.hpp	Wed Jul 05 19:43:34 2017 +0200
@@ -144,7 +144,7 @@
   // stubs
   void emit_slow_case_stubs();
   void emit_static_call_stub();
-  void emit_code_stub(CodeStub* op);
+  void append_code_stub(CodeStub* op);
   void add_call_info_here(CodeEmitInfo* info)                              { add_call_info(code_offset(), info); }
 
   // code patterns
--- a/hotspot/src/share/vm/c1/c1_LinearScan.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/c1/c1_LinearScan.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -2382,16 +2382,6 @@
   int arg_count = frame_map()->oop_map_arg_count();
   OopMap* map = new OopMap(frame_size, arg_count);
 
-  // Check if this is a patch site.
-  bool is_patch_info = false;
-  if (op->code() == lir_move) {
-    assert(!is_call_site, "move must not be a call site");
-    assert(op->as_Op1() != NULL, "move must be LIR_Op1");
-    LIR_Op1* move = (LIR_Op1*)op;
-
-    is_patch_info = move->patch_code() != lir_patch_none;
-  }
-
   // Iterate through active intervals
   for (Interval* interval = iw->active_first(fixedKind); interval != Interval::end(); interval = interval->next()) {
     int assigned_reg = interval->assigned_reg();
@@ -2406,7 +2396,7 @@
     // moves, any intervals which end at this instruction are included
     // in the oop map since we may safepoint while doing the patch
     // before we've consumed the inputs.
-    if (is_patch_info || op->id() < interval->current_to()) {
+    if (op->is_patching() || op->id() < interval->current_to()) {
 
       // caller-save registers must not be included into oop-maps at calls
       assert(!is_call_site || assigned_reg >= nof_regs || !is_caller_save(assigned_reg), "interval is in a caller-save register at a call -> register will be overwritten");
--- a/hotspot/src/share/vm/classfile/classLoaderData.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/classfile/classLoaderData.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -274,6 +274,8 @@
   MutexLockerEx ml(metaspace_lock(),  Mutex::_no_safepoint_check_flag);
   Klass* old_value = _klasses;
   k->set_next_link(old_value);
+  // Make sure linked class is stable, since the class list is walked without a lock
+  OrderAccess::storestore();
   // link the new item into the list
   _klasses = k;
 
--- a/hotspot/src/share/vm/classfile/verifier.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/classfile/verifier.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -2036,7 +2036,7 @@
     while ((bcp + padding_offset) < aligned_bcp) {
       if(*(bcp + padding_offset) != 0) {
         verify_error(ErrorContext::bad_code(bci),
-                     "Nonzero padding byte in lookswitch or tableswitch");
+                     "Nonzero padding byte in lookupswitch or tableswitch");
         return;
       }
       padding_offset++;
--- a/hotspot/src/share/vm/compiler/compilerOracle.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/compiler/compilerOracle.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -307,6 +307,9 @@
   return (check_predicate(PrintCommand, method));
 }
 
+bool CompilerOracle::should_print_methods() {
+  return lists[PrintCommand] != NULL;
+}
 
 bool CompilerOracle::should_log(methodHandle method) {
   if (!LogCompilation)            return false;
--- a/hotspot/src/share/vm/compiler/compilerOracle.hpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/compiler/compilerOracle.hpp	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 1998, 2012, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 1998, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -73,6 +73,9 @@
   // For updating the oracle file
   static void append_comment_to_file(const char* message);
   static void append_exclude_to_file(methodHandle method);
+
+  // Tells whether there are any methods to print for print_method_statistics()
+  static bool should_print_methods();
 };
 
 #endif // SHARE_VM_COMPILER_COMPILERORACLE_HPP
--- a/hotspot/src/share/vm/interpreter/interpreterRuntime.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/interpreter/interpreterRuntime.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -1267,8 +1267,10 @@
 // This is a support of the JVMTI PopFrame interface.
 // Make sure it is an invokestatic of a polymorphic intrinsic that has a member_name argument
 // and return it as a vm_result so that it can be reloaded in the list of invokestatic parameters.
-// The dmh argument is a reference to a DirectMethoHandle that has a member name field.
-IRT_ENTRY(void, InterpreterRuntime::member_name_arg_or_null(JavaThread* thread, address dmh,
+// The member_name argument is a saved reference (in local#0) to the member_name.
+// For backward compatibility with some JDK versions (7, 8) it can also be a direct method handle.
+// FIXME: remove DMH case after j.l.i.InvokerBytecodeGenerator code shape is updated.
+IRT_ENTRY(void, InterpreterRuntime::member_name_arg_or_null(JavaThread* thread, address member_name,
                                                             Method* method, address bcp))
   Bytecodes::Code code = Bytecodes::code_at(method, bcp);
   if (code != Bytecodes::_invokestatic) {
@@ -1280,8 +1282,12 @@
   Symbol* mname = cpool->name_ref_at(cp_index);
 
   if (MethodHandles::has_member_arg(cname, mname)) {
-    oop member_name = java_lang_invoke_DirectMethodHandle::member((oop)dmh);
-    thread->set_vm_result(member_name);
+    oop member_name_oop = (oop) member_name;
+    if (java_lang_invoke_DirectMethodHandle::is_instance(member_name_oop)) {
+      // FIXME: remove after j.l.i.InvokerBytecodeGenerator code shape is updated.
+      member_name_oop = java_lang_invoke_DirectMethodHandle::member(member_name_oop);
+    }
+    thread->set_vm_result(member_name_oop);
   }
 IRT_END
 #endif // INCLUDE_JVMTI
--- a/hotspot/src/share/vm/memory/metaspace.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/memory/metaspace.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -3095,7 +3095,7 @@
 
 void Metaspace::global_initialize() {
   // Initialize the alignment for shared spaces.
-  int max_alignment = os::vm_page_size();
+  int max_alignment = os::vm_allocation_granularity();
   size_t cds_total = 0;
 
   MetaspaceShared::set_max_alignment(max_alignment);
--- a/hotspot/src/share/vm/oops/instanceKlass.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/oops/instanceKlass.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -1273,6 +1273,12 @@
 
 
 void InstanceKlass::methods_do(void f(Method* method)) {
+  // Methods aren't stable until they are loaded.  This can be read outside
+  // a lock through the ClassLoaderData for profiling
+  if (!is_loaded()) {
+    return;
+  }
+
   int len = methods()->length();
   for (int index = 0; index < len; index++) {
     Method* m = methods()->at(index);
--- a/hotspot/src/share/vm/opto/c2compiler.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/opto/c2compiler.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -155,6 +155,9 @@
       }
     }
 
+    // print inlining for last compilation only
+    C.dump_print_inlining();
+
     // No retry; just break the loop.
     break;
   }
--- a/hotspot/src/share/vm/opto/compile.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/opto/compile.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -672,6 +672,7 @@
                   _print_inlining_list(NULL),
                   _print_inlining_stream(NULL),
                   _print_inlining_idx(0),
+                  _print_inlining_output(NULL),
                   _preserve_jvm_state(0),
                   _interpreter_frame_size(0) {
   C = this;
@@ -978,6 +979,7 @@
     _print_inlining_list(NULL),
     _print_inlining_stream(NULL),
     _print_inlining_idx(0),
+    _print_inlining_output(NULL),
     _preserve_jvm_state(0),
     _allowed_reasons(0),
     _interpreter_frame_size(0) {
@@ -2207,7 +2209,7 @@
 
  } // (End scope of igvn; run destructor if necessary for asserts.)
 
-  dump_inlining();
+  process_print_inlining();
   // A method with only infinite loops has no edges entering loops from root
   {
     NOT_PRODUCT( TracePhase t2("graphReshape", &_t_graphReshaping, TimeCompiler); )
@@ -3868,7 +3870,7 @@
   assert(!_print_inlining || _print_inlining_stream->size() == 0, "loosing data");
 }
 
-void Compile::dump_inlining() {
+void Compile::process_print_inlining() {
   bool do_print_inlining = print_inlining() || print_intrinsics();
   if (do_print_inlining || log() != NULL) {
     // Print inlining message for candidates that we couldn't inline
@@ -3885,9 +3887,21 @@
     }
   }
   if (do_print_inlining) {
+    ResourceMark rm;
+    stringStream ss;
     for (int i = 0; i < _print_inlining_list->length(); i++) {
-      tty->print("%s", _print_inlining_list->adr_at(i)->ss()->as_string());
+      ss.print("%s", _print_inlining_list->adr_at(i)->ss()->as_string());
     }
+    size_t end = ss.size();
+    _print_inlining_output = NEW_ARENA_ARRAY(comp_arena(), char, end+1);
+    strncpy(_print_inlining_output, ss.base(), end+1);
+    _print_inlining_output[end] = 0;
+  }
+}
+
+void Compile::dump_print_inlining() {
+  if (_print_inlining_output != NULL) {
+    tty->print_raw(_print_inlining_output);
   }
 }
 
--- a/hotspot/src/share/vm/opto/compile.hpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/opto/compile.hpp	Wed Jul 05 19:43:34 2017 +0200
@@ -420,6 +420,7 @@
   stringStream* _print_inlining_stream;
   GrowableArray<PrintInliningBuffer>* _print_inlining_list;
   int _print_inlining_idx;
+  char* _print_inlining_output;
 
   // Only keep nodes in the expensive node list that need to be optimized
   void cleanup_expensive_nodes(PhaseIterGVN &igvn);
@@ -917,7 +918,8 @@
 
   void remove_useless_late_inlines(GrowableArray<CallGenerator*>* inlines, Unique_Node_List &useful);
 
-  void dump_inlining();
+  void process_print_inlining();
+  void dump_print_inlining();
 
   bool over_inlining_cutoff() const {
     if (!inlining_incrementally()) {
--- a/hotspot/src/share/vm/prims/jvmtiEnv.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/prims/jvmtiEnv.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -307,9 +307,9 @@
       !java_lang_Class::is_primitive(mirror)) {
     Klass* k = java_lang_Class::as_Klass(mirror);
     assert(k != NULL, "class for non-primitive mirror must exist");
-    *size_ptr = k->size() * wordSize;
+    *size_ptr = (jlong)k->size() * wordSize;
   } else {
-    *size_ptr = mirror->size() * wordSize;
+    *size_ptr = (jlong)mirror->size() * wordSize;
     }
   return JVMTI_ERROR_NONE;
 } /* end GetObjectSize */
--- a/hotspot/src/share/vm/prims/whitebox.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/prims/whitebox.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -33,9 +33,11 @@
 #include "prims/whitebox.hpp"
 #include "prims/wbtestmethods/parserTests.hpp"
 
+#include "runtime/thread.hpp"
 #include "runtime/arguments.hpp"
 #include "runtime/interfaceSupport.hpp"
 #include "runtime/os.hpp"
+
 #include "utilities/debug.hpp"
 #include "utilities/macros.hpp"
 #include "utilities/exceptions.hpp"
@@ -576,6 +578,15 @@
 WB_END
 
 
+WB_ENTRY(jlong, WB_GetThreadStackSize(JNIEnv* env, jobject o))
+  return (jlong) Thread::current()->stack_size();
+WB_END
+
+WB_ENTRY(jlong, WB_GetThreadRemainingStackSize(JNIEnv* env, jobject o))
+  JavaThread* t = JavaThread::current();
+  return (jlong) t->stack_available(os::current_stack_pointer()) - (jlong) StackShadowPages * os::vm_page_size();
+WB_END
+
 //Some convenience methods to deal with objects from java
 int WhiteBox::offset_for_field(const char* field_name, oop object,
     Symbol* signature_symbol) {
@@ -690,6 +701,8 @@
   {CC"getCPUFeatures",     CC"()Ljava/lang/String;",  (void*)&WB_GetCPUFeatures     },
   {CC"getNMethod",         CC"(Ljava/lang/reflect/Executable;Z)[Ljava/lang/Object;",
                                                       (void*)&WB_GetNMethod         },
+  {CC"getThreadStackSize", CC"()J",                   (void*)&WB_GetThreadStackSize },
+  {CC"getThreadRemainingStackSize", CC"()J",          (void*)&WB_GetThreadRemainingStackSize },
 };
 
 #undef CC
--- a/hotspot/src/share/vm/runtime/arguments.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/runtime/arguments.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -1449,7 +1449,7 @@
   return true;
 }
 
-uintx Arguments::max_heap_for_compressed_oops() {
+size_t Arguments::max_heap_for_compressed_oops() {
   // Avoid sign flip.
   assert(OopEncodingHeapMax > (uint64_t)os::vm_page_size(), "Unusual page size");
   // We need to fit both the NULL page and the heap into the memory budget, while
--- a/hotspot/src/share/vm/runtime/java.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/runtime/java.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -120,7 +120,8 @@
 }
 
 void print_method_profiling_data() {
-  if (ProfileInterpreter COMPILER1_PRESENT(|| C1UpdateMethodData)) {
+  if (ProfileInterpreter COMPILER1_PRESENT(|| C1UpdateMethodData) &&
+     (PrintMethodData || CompilerOracle::should_print_methods())) {
     ResourceMark rm;
     HandleMark hm;
     collected_profiled_methods = new GrowableArray<Method*>(1024);
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/src/share/vm/runtime/sharedRuntimeMath.hpp	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,97 @@
+/*
+ * Copyright (c) 2014, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ *
+ */
+
+#ifndef SHARE_VM_RUNTIME_SHAREDRUNTIMEMATH_HPP
+#define SHARE_VM_RUNTIME_SHAREDRUNTIMEMATH_HPP
+
+#include <math.h>
+
+// VM_LITTLE_ENDIAN is #defined appropriately in the Makefiles
+// [jk] this is not 100% correct because the float word order may different
+// from the byte order (e.g. on ARM FPA)
+#ifdef VM_LITTLE_ENDIAN
+# define __HI(x) *(1+(int*)&x)
+# define __LO(x) *(int*)&x
+#else
+# define __HI(x) *(int*)&x
+# define __LO(x) *(1+(int*)&x)
+#endif
+
+static double copysignA(double x, double y) {
+  __HI(x) = (__HI(x)&0x7fffffff)|(__HI(y)&0x80000000);
+  return x;
+}
+
+/*
+ * ====================================================
+ * Copyright (c) 1998 Oracle and/or its affiliates. All rights reserved.
+ *
+ * Developed at SunSoft, a Sun Microsystems, Inc. business.
+ * Permission to use, copy, modify, and distribute this
+ * software is freely granted, provided that this notice
+ * is preserved.
+ * ====================================================
+ */
+
+/*
+ * scalbn (double x, int n)
+ * scalbn(x,n) returns x* 2**n  computed by  exponent
+ * manipulation rather than by actually performing an
+ * exponentiation or a multiplication.
+ */
+
+static const double
+two54   =  1.80143985094819840000e+16, /* 0x43500000, 0x00000000 */
+twom54  =  5.55111512312578270212e-17, /* 0x3C900000, 0x00000000 */
+hugeX  = 1.0e+300,
+tiny   = 1.0e-300;
+
+static double scalbnA (double x, int n) {
+  int  k,hx,lx;
+  hx = __HI(x);
+  lx = __LO(x);
+  k = (hx&0x7ff00000)>>20;              /* extract exponent */
+  if (k==0) {                           /* 0 or subnormal x */
+    if ((lx|(hx&0x7fffffff))==0) return x; /* +-0 */
+    x *= two54;
+    hx = __HI(x);
+    k = ((hx&0x7ff00000)>>20) - 54;
+    if (n< -50000) return tiny*x;       /*underflow*/
+  }
+  if (k==0x7ff) return x+x;             /* NaN or Inf */
+  k = k+n;
+  if (k >  0x7fe) return hugeX*copysignA(hugeX,x); /* overflow  */
+  if (k > 0)                            /* normal result */
+    {__HI(x) = (hx&0x800fffff)|(k<<20); return x;}
+  if (k <= -54) {
+    if (n > 50000)      /* in case integer overflow in n+k */
+      return hugeX*copysignA(hugeX,x);  /*overflow*/
+    else return tiny*copysignA(tiny,x); /*underflow*/
+  }
+  k += 54;                              /* subnormal result */
+  __HI(x) = (hx&0x800fffff)|(k<<20);
+  return x*twom54;
+}
+
+#endif // SHARE_VM_RUNTIME_SHAREDRUNTIMEMATH_HPP
--- a/hotspot/src/share/vm/runtime/sharedRuntimeTrans.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/runtime/sharedRuntimeTrans.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2005, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -43,78 +43,7 @@
 # pragma optimize ( "", off )
 #endif
 
-#include <math.h>
-
-// VM_LITTLE_ENDIAN is #defined appropriately in the Makefiles
-// [jk] this is not 100% correct because the float word order may different
-// from the byte order (e.g. on ARM)
-#ifdef VM_LITTLE_ENDIAN
-# define __HI(x) *(1+(int*)&x)
-# define __LO(x) *(int*)&x
-#else
-# define __HI(x) *(int*)&x
-# define __LO(x) *(1+(int*)&x)
-#endif
-
-#if !defined(AIX)
-double copysign(double x, double y) {
-  __HI(x) = (__HI(x)&0x7fffffff)|(__HI(y)&0x80000000);
-  return x;
-}
-#endif
-
-/*
- * ====================================================
- * Copyright (c) 1998 Oracle and/or its affiliates. All rights reserved.
- *
- * Developed at SunSoft, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-/*
- * scalbn (double x, int n)
- * scalbn(x,n) returns x* 2**n  computed by  exponent
- * manipulation rather than by actually performing an
- * exponentiation or a multiplication.
- */
-
-static const double
-two54   =  1.80143985094819840000e+16, /* 0x43500000, 0x00000000 */
-  twom54  =  5.55111512312578270212e-17, /* 0x3C900000, 0x00000000 */
-  hugeX   = 1.0e+300,
-  tiny   = 1.0e-300;
-
-#if !defined(AIX)
-double scalbn (double x, int n) {
-  int  k,hx,lx;
-  hx = __HI(x);
-  lx = __LO(x);
-  k = (hx&0x7ff00000)>>20;              /* extract exponent */
-  if (k==0) {                           /* 0 or subnormal x */
-    if ((lx|(hx&0x7fffffff))==0) return x; /* +-0 */
-    x *= two54;
-    hx = __HI(x);
-    k = ((hx&0x7ff00000)>>20) - 54;
-    if (n< -50000) return tiny*x;       /*underflow*/
-  }
-  if (k==0x7ff) return x+x;             /* NaN or Inf */
-  k = k+n;
-  if (k >  0x7fe) return hugeX*copysign(hugeX,x); /* overflow  */
-  if (k > 0)                            /* normal result */
-    {__HI(x) = (hx&0x800fffff)|(k<<20); return x;}
-  if (k <= -54) {
-    if (n > 50000)      /* in case integer overflow in n+k */
-      return hugeX*copysign(hugeX,x);   /*overflow*/
-    else return tiny*copysign(tiny,x);  /*underflow*/
-  }
-  k += 54;                              /* subnormal result */
-  __HI(x) = (hx&0x800fffff)|(k<<20);
-  return x*twom54;
-}
-#endif
+#include "runtime/sharedRuntimeMath.hpp"
 
 /* __ieee754_log(x)
  * Return the logarithm of x
@@ -719,7 +648,7 @@
   z  = one-(r-z);
   j  = __HI(z);
   j += (n<<20);
-  if((j>>20)<=0) z = scalbn(z,n);       /* subnormal output */
+  if((j>>20)<=0) z = scalbnA(z,n);       /* subnormal output */
   else __HI(z) += (n<<20);
   return s*z;
 }
--- a/hotspot/src/share/vm/runtime/sharedRuntimeTrig.cpp	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/src/share/vm/runtime/sharedRuntimeTrig.cpp	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2001, 2010, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2001, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -63,63 +63,7 @@
 #define SAFEBUF
 #endif
 
-#include <math.h>
-
-// VM_LITTLE_ENDIAN is #defined appropriately in the Makefiles
-// [jk] this is not 100% correct because the float word order may different
-// from the byte order (e.g. on ARM)
-#ifdef VM_LITTLE_ENDIAN
-# define __HI(x) *(1+(int*)&x)
-# define __LO(x) *(int*)&x
-#else
-# define __HI(x) *(int*)&x
-# define __LO(x) *(1+(int*)&x)
-#endif
-
-static double copysignA(double x, double y) {
-  __HI(x) = (__HI(x)&0x7fffffff)|(__HI(y)&0x80000000);
-  return x;
-}
-
-/*
- * scalbn (double x, int n)
- * scalbn(x,n) returns x* 2**n  computed by  exponent
- * manipulation rather than by actually performing an
- * exponentiation or a multiplication.
- */
-
-static const double
-two54   =  1.80143985094819840000e+16, /* 0x43500000, 0x00000000 */
-twom54  =  5.55111512312578270212e-17, /* 0x3C900000, 0x00000000 */
-hugeX  = 1.0e+300,
-tiny   = 1.0e-300;
-
-static double scalbnA (double x, int n) {
-  int  k,hx,lx;
-  hx = __HI(x);
-  lx = __LO(x);
-  k = (hx&0x7ff00000)>>20;              /* extract exponent */
-  if (k==0) {                           /* 0 or subnormal x */
-    if ((lx|(hx&0x7fffffff))==0) return x; /* +-0 */
-    x *= two54;
-    hx = __HI(x);
-    k = ((hx&0x7ff00000)>>20) - 54;
-    if (n< -50000) return tiny*x;       /*underflow*/
-  }
-  if (k==0x7ff) return x+x;             /* NaN or Inf */
-  k = k+n;
-  if (k >  0x7fe) return hugeX*copysignA(hugeX,x); /* overflow  */
-  if (k > 0)                            /* normal result */
-    {__HI(x) = (hx&0x800fffff)|(k<<20); return x;}
-  if (k <= -54) {
-    if (n > 50000)      /* in case integer overflow in n+k */
-      return hugeX*copysignA(hugeX,x);  /*overflow*/
-    else return tiny*copysignA(tiny,x); /*underflow*/
-  }
-  k += 54;                              /* subnormal result */
-  __HI(x) = (hx&0x800fffff)|(k<<20);
-  return x*twom54;
-}
+#include "runtime/sharedRuntimeMath.hpp"
 
 /*
  * __kernel_rem_pio2(x,y,e0,nx,prec,ipio2)
--- a/hotspot/test/TEST.groups	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/test/TEST.groups	Wed Jul 05 19:43:34 2017 +0200
@@ -83,6 +83,7 @@
   runtime/RedefineObject/TestRedefineObject.java \
   runtime/XCheckJniJsig/XCheckJSig.java \
   serviceability/attach/AttachWithStalePidFile.java \
+  serviceability/jvmti/8036666/GetObjectLockCount.java \
   serviceability/sa/jmap-hprof/JMapHProfLargeHeapTest.java \
   serviceability/dcmd/DynLibDcmdTest.java
 
@@ -134,9 +135,12 @@
   gc/parallelScavenge/TestDynShrinkHeap.java \
   runtime/InternalApi/ThreadCpuTimesDeadlock.java \
   serviceability/threads/TestFalseDeadLock.java \
+  serviceability/jvmti/GetObjectSizeOverflow.java \
+  serviceability/jvmti/TestRedefineWithUnresolvedClass.java \
   compiler/tiered/NonTieredLevelsTest.java \
   compiler/tiered/TieredLevelsTest.java \
-  compiler/intrinsics/bmi/verifycode
+  compiler/intrinsics/bmi/verifycode \
+  runtime/whitebox/WBStackSize.java
 
 # Compact 2 adds full VM tests
 compact2 = \
--- a/hotspot/test/compiler/5091921/Test7005594.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/test/compiler/5091921/Test7005594.java	Wed Jul 05 19:43:34 2017 +0200
@@ -25,7 +25,6 @@
 /**
  * @test
  * @bug 7005594
- * @ignore 7117034
  * @summary Array overflow not handled correctly with loop optimzations
  *
  * @run shell Test7005594.sh
--- a/hotspot/test/compiler/5091921/Test7005594.sh	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/test/compiler/5091921/Test7005594.sh	Wed Jul 05 19:43:34 2017 +0200
@@ -78,7 +78,7 @@
 
 ${COMPILEJAVA}/bin/javac ${TESTJAVACOPTS} -d . Test7005594.java
 
-${TESTJAVA}/bin/java ${TESTVMOPTS} -Xms1600m -XX:+IgnoreUnrecognizedVMOptions -XX:-ZapUnusedHeapArea -Xcomp -XX:CompileOnly=Test7005594.test Test7005594 > test.out 2>&1
+${TESTJAVA}/bin/java ${TESTVMOPTS} -Xmx1600m -Xms1600m -XX:+IgnoreUnrecognizedVMOptions -XX:-ZapUnusedHeapArea -Xcomp -XX:CompileOnly=Test7005594.test Test7005594 > test.out 2>&1
 
 result=$?
 
@@ -97,7 +97,7 @@
 fi
 
 # The test should pass when no enough space for object heap
-grep "Could not reserve enough space for object heap" test.out
+grep "Could not reserve enough space for .*object heap" test.out
 if [ $? = 0 ]
 then
   echo "Passed"
--- a/hotspot/test/compiler/arguments/BMICommandLineOptionTestBase.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/test/compiler/arguments/BMICommandLineOptionTestBase.java	Wed Jul 05 19:43:34 2017 +0200
@@ -25,6 +25,12 @@
 
 /**
  * Base class for all X86 bit manipulation related command line options.
+ *
+ * Note that this test intended to verify that VM could be launched with
+ * specific options and that values of these options processed correctly.
+ * In order to do that test launch a new VM with tested options, the same
+ * flavor-specific flag as one that was used for parent VM (-client, -server,
+ * -minimal, -graal) and '-version'.
  */
 public abstract class BMICommandLineOptionTestBase
               extends CPUSpecificCommandLineOptionTest {
@@ -58,10 +64,11 @@
                                         String supportedCPUFeatures[],
                                         String unsupportedCPUFeatures[]) {
         super(".*", supportedCPUFeatures, unsupportedCPUFeatures);
-            this.optionName = optionName;
-            this.warningMessage = warningMessage;
-            this.errorMessage = CommandLineOptionTest.
-                UNRECOGNIZED_OPTION_ERROR_FORMAT.format(optionName);
+        this.optionName = optionName;
+        this.warningMessage = warningMessage;
+        this.errorMessage = String.format(
+                CommandLineOptionTest.UNRECOGNIZED_OPTION_ERROR_FORMAT,
+                optionName);
     }
 
 }
--- a/hotspot/test/compiler/arguments/BMISupportedCPUTest.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/test/compiler/arguments/BMISupportedCPUTest.java	Wed Jul 05 19:43:34 2017 +0200
@@ -28,6 +28,12 @@
  * Test on bit manipulation related command line options,
  * that should be executed on CPU that supports all required
  * features.
+ *
+ * Note that this test intended to verify that VM could be launched with
+ * specific options and that values of these options processed correctly.
+ * In order to do that test launch a new VM with tested options, the same
+ * flavor-specific flag as one that was used for parent VM (-client, -server,
+ * -minimal, -graal) and '-version'.
  */
 public class BMISupportedCPUTest extends BMICommandLineOptionTestBase {
 
@@ -49,24 +55,38 @@
 
     @Override
     public void runTestCases() throws Throwable {
-        // verify that VM will succesfully start up whithout warnings
-        CommandLineOptionTest.
-            verifyJVMStartup("-XX:+" + optionName,
-                             null, new String[] { warningMessage },
-                             ExitCode.OK);
+        /*
+          Verify that VM will successfully start up without warnings.
+          VM will be launched with following flags:
+          -XX:+<tested option> -version
+        */
+        CommandLineOptionTest.verifySameJVMStartup(null,
+                new String[] { warningMessage }, ExitCode.OK,
+                CommandLineOptionTest.prepareBooleanFlag(optionName, true));
 
-        // verify that VM will succesfully start up whithout warnings
-        CommandLineOptionTest.
-            verifyJVMStartup("-XX:-" + optionName,
-                             null, new String[] { warningMessage },
-                             ExitCode.OK);
+        /*
+          Verify that VM will successfully start up without warnings.
+          VM will be launched with following flags:
+          -XX:-<tested option> -version
+        */
+        CommandLineOptionTest.verifySameJVMStartup(null,
+                new String[] { warningMessage }, ExitCode.OK,
+                CommandLineOptionTest.prepareBooleanFlag(optionName, false));
 
-        // verify that on appropriate CPU option in on by default
-        CommandLineOptionTest.verifyOptionValue(optionName, "true");
+        /*
+          Verify that on appropriate CPU option in on by default.
+          VM will be launched with following flags:
+          -version
+        */
+        CommandLineOptionTest.verifyOptionValueForSameVM(optionName, "true");
 
-        // verify that option could be explicitly turned off
-        CommandLineOptionTest.verifyOptionValue(optionName, "false",
-                                                "-XX:-" + optionName);
+        /*
+          Verify that option could be explicitly turned off.
+          VM will be launched with following flags:
+          -XX:-<tested option> -version
+        */
+        CommandLineOptionTest.verifyOptionValueForSameVM(optionName, "false",
+                CommandLineOptionTest.prepareBooleanFlag(optionName, false));
     }
 }
 
--- a/hotspot/test/compiler/arguments/BMIUnsupportedCPUTest.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/test/compiler/arguments/BMIUnsupportedCPUTest.java	Wed Jul 05 19:43:34 2017 +0200
@@ -28,6 +28,12 @@
  * Test on bit manipulation related command line options,
  * that should be executed on CPU that does not support
  * required features.
+ *
+ * Note that this test intended to verify that VM could be launched with
+ * specific options and that values of these options processed correctly.
+ * In order to do that test launch a new VM with tested options, the same
+ * flavor-specific flag as one that was used for parent VM (-client, -server,
+ * -minimal, -graal) and '-version'.
  */
 public class BMIUnsupportedCPUTest extends BMICommandLineOptionTestBase {
 
@@ -64,28 +70,38 @@
      */
     public void unsupportedX86CPUTestCases() throws Throwable {
 
-        // verify that VM will succesfully start up, but output will
-        // contain a warning
-        CommandLineOptionTest.
-            verifyJVMStartup("-XX:+" + optionName,
-                             new String[] { warningMessage },
-                             new String[] { errorMessage },
-                             ExitCode.OK);
+        /*
+          Verify that VM will successfully start up, but output will contain a
+          warning. VM will be launched with following options:
+          -XX:+<tested option> -version
+        */
+        CommandLineOptionTest.verifySameJVMStartup(
+                new String[] { warningMessage }, new String[] { errorMessage },
+                ExitCode.OK, CommandLineOptionTest.prepareBooleanFlag(
+                        optionName, true));
 
-        // verify that VM will succesfully startup without any warnings
-        CommandLineOptionTest.
-            verifyJVMStartup("-XX:-" + optionName,
-                             null,
-                             new String[] { warningMessage, errorMessage },
-                             ExitCode.OK);
+        /*
+          Verify that VM will successfully startup without any warnings.
+          VM will be launched with following options:
+          -XX:-<tested option> -version
+        */
+        CommandLineOptionTest.verifySameJVMStartup(null,
+                new String[] { warningMessage, errorMessage }, ExitCode.OK,
+                CommandLineOptionTest.prepareBooleanFlag(optionName, false));
 
-        // verify that on unsupported CPUs option is off by default
-        CommandLineOptionTest.verifyOptionValue(optionName, "false");
+        /*
+          Verify that on unsupported CPUs option is off by default.
+          VM will be launched with following options: -version
+        */
+        CommandLineOptionTest.verifyOptionValueForSameVM(optionName, "false");
 
-        // verify that on unsupported CPUs option will be off even if
-        // it was explicitly turned on by uset
-        CommandLineOptionTest.verifyOptionValue(optionName, "false",
-                                                     "-XX:+" + optionName);
+        /*
+          Verify that on unsupported CPUs option will be off even if
+          it was explicitly turned on by user. VM will be launched with
+          following options: -XX:+<tested option> -version
+        */
+        CommandLineOptionTest.verifyOptionValueForSameVM(optionName, "false",
+                CommandLineOptionTest.prepareBooleanFlag(optionName, true));
 
     }
 
@@ -97,18 +113,17 @@
      */
     public void unsupportedNonX86CPUTestCases() throws Throwable {
 
-        // verify that VM known nothing about tested option
-        CommandLineOptionTest.
-            verifyJVMStartup("-XX:+" + optionName,
-                             new String[] { errorMessage },
-                             null,
-                             ExitCode.FAIL);
+        /*
+          Verify that VM known nothing about tested option. VM will be launched
+          with following options: -XX:[+-]<tested option> -version
+        */
+        CommandLineOptionTest.verifySameJVMStartup(
+                new String[] { errorMessage }, null, ExitCode.FAIL,
+                CommandLineOptionTest.prepareBooleanFlag(optionName, true));
 
-        CommandLineOptionTest.
-            verifyJVMStartup("-XX:-" + optionName,
-                             new String[] { errorMessage },
-                             null,
-                             ExitCode.FAIL);
+        CommandLineOptionTest.verifySameJVMStartup(
+                new String[] { errorMessage }, null, ExitCode.FAIL,
+                CommandLineOptionTest.prepareBooleanFlag(optionName, false));
     }
 }
 
--- a/hotspot/test/compiler/arguments/TestUseCountTrailingZerosInstructionOnSupportedCPU.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/test/compiler/arguments/TestUseCountTrailingZerosInstructionOnSupportedCPU.java	Wed Jul 05 19:43:34 2017 +0200
@@ -40,7 +40,8 @@
 import com.oracle.java.testlibrary.cli.*;
 
 public class TestUseCountTrailingZerosInstructionOnSupportedCPU
-     extends BMISupportedCPUTest {
+        extends BMISupportedCPUTest {
+    private static final String DISABLE_BMI = "-XX:-UseBMI1Instructions";
 
     public TestUseCountTrailingZerosInstructionOnSupportedCPU() {
         super("UseCountTrailingZerosInstruction", TZCNT_WARNING, "bmi1");
@@ -51,18 +52,23 @@
 
         super.runTestCases();
 
-        // verify that option will be disabled if all BMI1 instuctions
-        // are explicitly disabled
-        CommandLineOptionTest.
-            verifyOptionValue("UseCountTrailingZerosInstruction", "false",
-                              "-XX:-UseBMI1Instructions");
+        /*
+          Verify that option will be disabled if all BMI1 instructions
+          are explicitly disabled. VM will be launched with following options:
+          -XX:-UseBMI1Instructions -version
+        */
+        CommandLineOptionTest.verifyOptionValueForSameVM(optionName, "false",
+                TestUseCountTrailingZerosInstructionOnSupportedCPU.DISABLE_BMI);
 
-        // verify that option could be turned on even if other BMI1
-        // instructions were turned off
-        CommandLineOptionTest.
-            verifyOptionValue("UseCountTrailingZerosInstruction", "true",
-                              "-XX:-UseBMI1Instructions",
-                              "-XX:+UseCountTrailingZerosInstruction");
+        /*
+          Verify that option could be turned on even if other BMI1
+          instructions were turned off. VM will be launched with following
+          options: -XX:-UseBMI1Instructions
+          -XX:+UseCountTrailingZerosInstruction -version
+        */
+        CommandLineOptionTest.verifyOptionValueForSameVM(optionName, "true",
+                TestUseCountTrailingZerosInstructionOnSupportedCPU.DISABLE_BMI,
+                CommandLineOptionTest.prepareBooleanFlag(optionName, true));
     }
 
     public static void main(String args[]) throws Throwable {
--- a/hotspot/test/compiler/arguments/TestUseCountTrailingZerosInstructionOnUnsupportedCPU.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/test/compiler/arguments/TestUseCountTrailingZerosInstructionOnUnsupportedCPU.java	Wed Jul 05 19:43:34 2017 +0200
@@ -25,7 +25,7 @@
  * @test
  * @bug 8031321
  * @summary Verify processing of UseCountTrailingZerosInstruction option
- *          on CPU without TZCNT instuction (BMI1 feature) support.
+ *          on CPU without TZCNT instruction (BMI1 feature) support.
  * @library /testlibrary /testlibrary/whitebox
  * @build TestUseCountTrailingZerosInstructionOnUnsupportedCPU
  *        BMIUnsupportedCPUTest
@@ -40,7 +40,8 @@
 import com.oracle.java.testlibrary.cli.*;
 
 public class TestUseCountTrailingZerosInstructionOnUnsupportedCPU
-     extends BMIUnsupportedCPUTest {
+        extends BMIUnsupportedCPUTest {
+    private static final String ENABLE_BMI = "-XX:+UseBMI1Instructions";
 
     public TestUseCountTrailingZerosInstructionOnUnsupportedCPU() {
         super("UseCountTrailingZerosInstruction", TZCNT_WARNING, "bmi1");
@@ -51,16 +52,24 @@
 
         super.unsupportedX86CPUTestCases();
 
-        // verify that option will not be turned on during
-        // UseBMI1Instuctions processing
-        CommandLineOptionTest.
-            verifyOptionValue("UseCountTrailingZerosInstruction", "false",
-                              "-XX:+UseBMI1Instructions");
+        /*
+          Verify that option will not be turned on during UseBMI1Instructions
+          processing. VM will be launched with following options:
+          -XX:+UseBMI1Instructions -version
+        */
+        CommandLineOptionTest.verifyOptionValueForSameVM(optionName, "false",
+                TestUseCountTrailingZerosInstructionOnUnsupportedCPU.
+                        ENABLE_BMI);
 
-        CommandLineOptionTest.
-            verifyOptionValue("UseCountTrailingZerosInstruction", "false",
-                              "-XX:+UseCountTrailingZerosInstruction",
-                              "-XX:+UseBMI1Instructions");
+        /*
+          VM will be launched with following options:
+          -XX:+UseCountTrailingZerosInstruction -XX:+UseBMI1Instructions
+          -version
+        */
+        CommandLineOptionTest.verifyOptionValueForSameVM(optionName, "false",
+                CommandLineOptionTest.prepareBooleanFlag(optionName, true),
+                TestUseCountTrailingZerosInstructionOnUnsupportedCPU.
+                        ENABLE_BMI);
     }
 
     public static void main(String args[]) throws Throwable {
--- a/hotspot/test/compiler/uncommontrap/TestSpecTrapClassUnloading.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/test/compiler/uncommontrap/TestSpecTrapClassUnloading.java	Wed Jul 05 19:43:34 2017 +0200
@@ -25,7 +25,7 @@
  * @test
  * @bug 8031752
  * @summary speculative traps need to be cleaned up at GC
- * @run main/othervm -XX:+IgnoreUnrecognizedVMOptions -XX:-TieredCompilation -XX:-UseOnStackReplacement -XX:-BackgroundCompilation -XX:+UseTypeSpeculation -XX:TypeProfileLevel=222 -XX:CompileCommand=exclude,java.lang.reflect.Method::invoke -XX:CompileCommand=exclude,sun.reflect.DelegatingMethodAccessorImpl::invoke -Xmx1M TestSpecTrapClassUnloading
+ * @run main/othervm -XX:+IgnoreUnrecognizedVMOptions -XX:-TieredCompilation -XX:-UseOnStackReplacement -XX:-BackgroundCompilation -XX:+UseTypeSpeculation -XX:TypeProfileLevel=222 -XX:CompileCommand=exclude,java.lang.reflect.Method::invoke -XX:CompileCommand=exclude,sun.reflect.DelegatingMethodAccessorImpl::invoke -Xmx512M TestSpecTrapClassUnloading
  *
  */
 
@@ -45,7 +45,7 @@
         MemoryChunk other;
         long[] array;
         MemoryChunk(MemoryChunk other) {
-            other = other;
+            this.other = other;
             array = new long[1024 * 1024 * 1024];
         }
     }
--- a/hotspot/test/gc/parallelScavenge/TestDynShrinkHeap.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/test/gc/parallelScavenge/TestDynShrinkHeap.java	Wed Jul 05 19:43:34 2017 +0200
@@ -26,7 +26,7 @@
  * @bug 8016479
  * @summary Verify that the heap shrinks after full GC according to the current values of the Min/MaxHeapFreeRatio flags
  * @library /testlibrary
- * @run main/othervm -XX:+UseAdaptiveSizePolicyWithSystemGC -XX:+UseParallelGC -XX:MinHeapFreeRatio=0 -XX:MaxHeapFreeRatio=100 -verbose:gc TestDynShrinkHeap
+ * @run main/othervm -XX:+UseAdaptiveSizePolicyWithSystemGC -XX:+UseParallelGC -XX:MinHeapFreeRatio=0 -XX:MaxHeapFreeRatio=100 -Xmx1g -verbose:gc TestDynShrinkHeap
  */
 import com.oracle.java.testlibrary.DynamicVMOption;
 import java.lang.management.ManagementFactory;
@@ -41,7 +41,7 @@
     public static final String MAX_FREE_RATIO_FLAG_NAME = "MaxHeapFreeRatio";
 
     private static ArrayList<byte[]> list = new ArrayList<>(0);
-    private static final int M = 1024 * 1024; // to make heap more manageable by test code
+    private static final int LEN = 512 * 1024 + 1;
 
     public TestDynShrinkHeap() {
     }
@@ -69,12 +69,12 @@
     }
 
     private void eat() {
-        for (int i = 0; i < M; i++) {
+        for (int i = 0; i < LEN; i++) {
             list.add(new byte[1024]);
         }
-        MemoryUsagePrinter.printMemoryUsage("allocated " + M + " arrays");
+        MemoryUsagePrinter.printMemoryUsage("allocated " + LEN + " arrays");
 
-        list.subList(0, M / 2).clear();
+        list.subList(0, LEN / 2).clear();
         System.gc();
         MemoryUsagePrinter.printMemoryUsage("array halved");
     }
--- a/hotspot/test/runtime/6929067/T.java	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,12 +0,0 @@
-public class T
-{
-  public static boolean foo(boolean bar)
-  {
-    return bar;
-  }
-
-  public static void printIt()
-  {
-    System.out.println("Hello");
-  }
-}
--- a/hotspot/test/runtime/6929067/Test6929067.sh	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,56 +0,0 @@
-#!/bin/sh
-
-##
-## @test Test6929067.sh
-## @bug 6929067
-## @bug 8021296
-## @bug 8025519
-## @summary Stack guard pages should be removed when thread is detached
-## @run shell Test6929067.sh
-##
-
-if [ "${TESTSRC}" = "" ]
-then
-  TESTSRC=${PWD}
-  echo "TESTSRC not set.  Using "${TESTSRC}" as default"
-fi
-echo "TESTSRC=${TESTSRC}"
-## Adding common setup Variables for running shell tests.
-. ${TESTSRC}/../../test_env.sh
-
-if [ "${VM_OS}" != "linux" ]
-then
-  echo "Test only valid for Linux"
-  exit 0
-fi
-
-gcc_cmd=`which gcc`
-if [ "x$gcc_cmd" = "x" ]; then
-  echo "WARNING: gcc not found. Cannot execute test." 2>&1
-  exit 0;
-fi
-
-CFLAGS=-m${VM_BITS}
-
-LD_LIBRARY_PATH=.:${TESTJAVA}/jre/lib/${VM_CPU}/${VM_TYPE}:/usr/lib:$LD_LIBRARY_PATH
-export LD_LIBRARY_PATH
-
-cp ${TESTSRC}/*.java ${THIS_DIR}
-${COMPILEJAVA}/bin/javac *.java
-
-echo "Architecture: ${VM_CPU}"
-echo "Compilation flag: ${CFLAGS}"
-echo "VM type: ${VM_TYPE}"
-echo "LD_LIBRARY_PATH: ${LD_LIBRARY_PATH}"
-
-# Note pthread may not be found thus invoke creation will fail to be created.
-# Check to ensure you have a /usr/lib/libpthread.so if you don't please look
-# for /usr/lib/`uname -m`-linux-gnu version ensure to add that path to below compilation.
-
-$gcc_cmd -DLINUX ${CFLAGS} -o invoke \
-    -I${TESTJAVA}/include -I${TESTJAVA}/include/linux \
-    -L${TESTJAVA}/jre/lib/${VM_CPU}/${VM_TYPE} \
-     ${TESTSRC}/invoke.c -ljvm -lpthread
-
-./invoke
-exit $?
--- a/hotspot/test/runtime/6929067/invoke.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,90 +0,0 @@
-#include <assert.h>
-#include <jni.h>
-#include <alloca.h>
-
-#include <pthread.h>
-
-union env_union
-{
-  void *void_env;
-  JNIEnv *jni_env;
-};
-
-union env_union tmp;
-JNIEnv* env;
-JavaVM* jvm;
-JavaVMInitArgs vm_args;
-JavaVMOption options[1];
-jclass class_id;
-jmethodID method_id;
-jint result;
-
-long product(unsigned long n, unsigned long m) {
-    if (m == 1) {
-      return n;
-    } else {
-      int *p = alloca(sizeof (int));
-      *p = n;
-      return product (n, m-1) + *p;
-    }
-}
-
-void *
-floobydust (void *p)
-{
-  (*jvm)->AttachCurrentThread(jvm, &tmp.void_env, NULL);
-  env = tmp.jni_env;
-
-  class_id = (*env)->FindClass (env, "T");
-  assert (class_id);
-
-  method_id = (*env)->GetStaticMethodID (env, class_id, "printIt", "()V");
-  assert (method_id);
-
-  (*env)->CallStaticVoidMethod (env, class_id, method_id, NULL);
-
-  (*jvm)->DetachCurrentThread(jvm);
-
-  printf("%ld\n", product(5000,5000));
-
-  (*jvm)->AttachCurrentThread(jvm, &tmp.void_env, NULL);
-  env = tmp.jni_env;
-
-  class_id = (*env)->FindClass (env, "T");
-  assert (class_id);
-
-  method_id = (*env)->GetStaticMethodID (env, class_id, "printIt", "()V");
-  assert (method_id);
-
-  (*env)->CallStaticVoidMethod (env, class_id, method_id, NULL);
-
-  (*jvm)->DetachCurrentThread(jvm);
-
-  printf("%ld\n", product(5000,5000));
-
-  return NULL;
-}
-
-int
-main (int argc, const char** argv)
-{
-  options[0].optionString = "-Xss320k";
-
-  vm_args.version = JNI_VERSION_1_2;
-  vm_args.ignoreUnrecognized = JNI_TRUE;
-  vm_args.options = options;
-  vm_args.nOptions = 1;
-
-  result = JNI_CreateJavaVM (&jvm, &tmp.void_env, &vm_args);
-  assert (result >= 0);
-
-  env = tmp.jni_env;
-
-  floobydust (NULL);
-
-  pthread_t thr;
-  pthread_create (&thr, NULL, floobydust, NULL);
-  pthread_join (thr, NULL);
-
-  return 0;
-}
--- a/hotspot/test/runtime/InitialThreadOverflow/DoOverflow.java	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,41 +0,0 @@
-/*
- * Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-public class DoOverflow {
-
-    static int count;
-
-    public void overflow() {
-        count+=1;
-        overflow();
-    }
-
-    public static void printIt() {
-        System.out.println("Going to overflow stack");
-        try {
-            new DoOverflow().overflow();
-        } catch(java.lang.StackOverflowError e) {
-            System.out.println("Overflow OK " + count);
-        }
-    }
-}
--- a/hotspot/test/runtime/InitialThreadOverflow/invoke.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,72 +0,0 @@
-/*
- * Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-#include <assert.h>
-#include <jni.h>
-
-#include <pthread.h>
-
-JavaVM* jvm;
-
-void *
-floobydust (void *p) {
-  JNIEnv *env;
-  jclass class_id;
-  jmethodID method_id;
-
-  (*jvm)->AttachCurrentThread(jvm, (void**)&env, NULL);
-
-  class_id = (*env)->FindClass (env, "DoOverflow");
-  assert (class_id);
-
-  method_id = (*env)->GetStaticMethodID(env, class_id, "printIt", "()V");
-  assert (method_id);
-
-  (*env)->CallStaticVoidMethod(env, class_id, method_id, NULL);
-
-  (*jvm)->DetachCurrentThread(jvm);
-}
-
-int
-main (int argc, const char** argv) {
-  JavaVMOption options[1];
-  options[0].optionString = (char*) "-Xss320k";
-
-  JavaVMInitArgs vm_args;
-  vm_args.version = JNI_VERSION_1_2;
-  vm_args.ignoreUnrecognized = JNI_TRUE;
-  vm_args.options = options;
-  vm_args.nOptions = 1;
-
-  JNIEnv* env;
-  jint result = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
-  assert(result >= 0);
-
-  pthread_t thr;
-  pthread_create(&thr, NULL, floobydust, NULL);
-  pthread_join(thr, NULL);
-
-  floobydust(NULL);
-
-  return 0;
-}
--- a/hotspot/test/runtime/InitialThreadOverflow/testme.sh	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,77 +0,0 @@
-#!/bin/sh
-
-# Copyright (c) 2013 Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-
-# @test testme.sh
-# @bug 8009062
-# @summary Poor performance of JNI AttachCurrentThread after fix for 7017193
-# @compile DoOverflow.java
-# @run shell testme.sh
-
-set -x
-if [ "${TESTSRC}" = "" ]
-then
-  TESTSRC=${PWD}
-  echo "TESTSRC not set.  Using "${TESTSRC}" as default"
-fi
-echo "TESTSRC=${TESTSRC}"
-## Adding common setup Variables for running shell tests.
-. ${TESTSRC}/../../test_env.sh
-
-if [ "${VM_OS}" != "linux" ]
-then
-  echo "Test only valid for Linux"
-  exit 0
-fi
-
-gcc_cmd=`which gcc`
-if [ "x$gcc_cmd" = "x" ]; then
-    echo "WARNING: gcc not found. Cannot execute test." 2>&1
-    exit 0;
-fi
-
-CFLAGS="-m${VM_BITS}"
-
-LD_LIBRARY_PATH=.:${TESTJAVA}/jre/lib/${VM_CPU}/${VM_TYPE}:/usr/lib:$LD_LIBRARY_PATH
-export LD_LIBRARY_PATH
-
-cp ${TESTSRC}/invoke.c .
-
-# Copy the result of our @compile action:
-cp ${TESTCLASSES}/DoOverflow.class .
-
-echo "Architecture: ${VM_CPU}"
-echo "Compilation flag: ${CFLAGS}"
-echo "VM type: ${VM_TYPE}"
-echo "LD_LIBRARY_PATH: ${LD_LIBRARY_PATH}"
-
-# Note pthread may not be found thus invoke creation will fail to be created.
-# Check to ensure you have a /usr/lib/libpthread.so if you don't please look
-# for /usr/lib/`uname -m`-linux-gnu version ensure to add that path to below compilation.
-
-$gcc_cmd -DLINUX ${CFLAGS} -o invoke \
-    -I${TESTJAVA}/include -I${TESTJAVA}/include/linux \
-    -L${TESTJAVA}/jre/lib/${VM_CPU}/${VM_TYPE} \
-    -ljvm -lpthread invoke.c
-
-./invoke
-exit $?
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/test/runtime/StackGuardPages/DoOverflow.java	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+public class DoOverflow {
+
+    static int count;
+
+    public void overflow() {
+        count+=1;
+        overflow();
+    }
+
+    public static void printAlive() {
+      System.out.println("Java thread is alive.");
+    }
+
+    public static void printIt() {
+        System.out.println("Going to overflow stack");
+        try {
+            new DoOverflow().overflow();
+        } catch(java.lang.StackOverflowError e) {
+            System.out.println("Test PASSED. Got StackOverflowError at " + count + " iteration");
+        }
+    }
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/test/runtime/StackGuardPages/invoke.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,266 @@
+/*
+ * Copyright (c) 2010, 2014, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ *
+ */
+
+/* This code tests the fact that we actually remove stack guard page when calling
+ * JavaThread::exit() i.e. when detaching from current thread.
+ * We overflow the stack and check that we get access error because of a guard page.
+ * Than we detach from vm thread and overflow stack once again. This time we shouldn't
+ * get access error because stack guard page is removed
+ *
+ * Notice: due a complicated interaction of signal handlers, the test may crash.
+ * It's OK - don't file a bug.
+ */
+
+#include <assert.h>
+#include <jni.h>
+#include <alloca.h>
+#include <signal.h>
+#include <sys/mman.h>
+#include <stdlib.h>
+#include <sys/ucontext.h>
+#include <setjmp.h>
+#include <unistd.h>
+#include <sys/syscall.h>
+#include <errno.h>
+
+#include <pthread.h>
+
+JavaVM* _jvm;
+
+static jmp_buf  context;
+
+static int _last_si_code = -1;
+static int _failures = 0;
+static int _rec_count = 0;
+static int _kp_rec_count = 0;
+
+pid_t gettid() {
+  return (pid_t) syscall(SYS_gettid);
+}
+
+static void handler(int sig, siginfo_t *si, void *unused) {
+  _last_si_code = si->si_code;
+  printf("Got SIGSEGV(%d) at address: 0x%lx\n",si->si_code, (long) si->si_addr);
+  longjmp(context, 1);
+}
+
+void set_signal_handler() {
+  static char altstack[SIGSTKSZ];
+
+  stack_t ss = {
+    .ss_size = SIGSTKSZ,
+    .ss_flags = 0,
+    .ss_sp = altstack
+  };
+
+  struct sigaction sa = {
+    .sa_sigaction = handler,
+    .sa_flags = SA_ONSTACK | SA_SIGINFO | SA_RESETHAND
+  };
+
+  _last_si_code = -1;
+
+  sigaltstack(&ss, 0);
+  sigemptyset(&sa.sa_mask);
+  if (sigaction(SIGSEGV, &sa, NULL) == -1) {
+    fprintf(stderr, "Test ERROR. Can't set sigaction (%d)\n", errno);
+    exit(7);
+  }
+}
+
+void *run_java_overflow (void *p) {
+  JNIEnv *env;
+  jclass class_id;
+  jmethodID method_id;
+  int res;
+
+  res = (*_jvm)->AttachCurrentThread(_jvm, (void**)&env, NULL);
+  if (res != JNI_OK) {
+    fprintf(stderr, "Test ERROR. Can't attach to current thread\n");
+    exit(7);
+  }
+
+  class_id = (*env)->FindClass (env, "DoOverflow");
+  if (class_id == NULL) {
+    fprintf(stderr, "Test ERROR. Can't load class DoOverflow\n");
+    exit(7);
+  }
+
+  method_id = (*env)->GetStaticMethodID(env, class_id, "printIt", "()V");
+  if (method_id == NULL) {
+    fprintf(stderr, "Test ERROR. Can't find method DoOverflow.printIt\n");
+    exit(7);
+  }
+
+  (*env)->CallStaticVoidMethod(env, class_id, method_id, NULL);
+
+  res = (*_jvm)->DetachCurrentThread(_jvm);
+  if (res != JNI_OK) {
+    fprintf(stderr, "Test ERROR. Can't call detach from current thread\n");
+    exit(7);
+  }
+}
+
+void do_overflow(){
+  int *p = alloca(sizeof(int));
+  if (_kp_rec_count == 0 || _rec_count < _kp_rec_count) {
+      _rec_count ++;
+      do_overflow();
+  }
+}
+
+void *run_native_overflow(void *p) {
+  // Test that stack guard page is correctly set for initial and non initial thread
+  // and correctly removed for the initial thread
+  JNIEnv *env;
+  jclass class_id;
+  jmethodID method_id;
+  int res;
+
+  printf("run_native_overflow %ld\n", (long) gettid());
+
+  res = (*_jvm)->AttachCurrentThread(_jvm, (void **)&env, NULL);
+  if (res != JNI_OK) {
+    fprintf(stderr, "Test ERROR. Can't attach to current thread\n");
+    exit(7);
+  }
+
+  class_id = (*env)->FindClass (env, "DoOverflow");
+  if (class_id == NULL) {
+    fprintf(stderr, "Test ERROR. Can't load class DoOverflow\n");
+    exit(7);
+  }
+
+  method_id = (*env)->GetStaticMethodID (env, class_id, "printAlive", "()V");
+  if (method_id == NULL) {
+    fprintf(stderr, "Test ERROR. Can't find method DoOverflow.printAlive\n");
+    exit(7);
+  }
+
+  (*env)->CallStaticVoidMethod (env, class_id, method_id, NULL);
+
+  set_signal_handler();
+  if (! setjmp(context)) {
+    do_overflow();
+  }
+
+  if (_last_si_code == SEGV_ACCERR) {
+    printf("Test PASSED. Got access violation accessing guard page at %d\n", _rec_count);
+  }
+
+  res = (*_jvm)->DetachCurrentThread(_jvm);
+  if (res != JNI_OK) {
+    fprintf(stderr, "Test ERROR. Can't call detach from current thread\n");
+    exit(7);
+  }
+
+  if (getpid() != gettid()) {
+    // For non-initial thread we don't unmap the region but call os::uncommit_memory and keep PROT_NONE
+    // so if host has enough swap space we will get the same SEGV with code SEGV_ACCERR(2) trying
+    // to access it as if the guard page is present.
+    // We have no way to check this, so bail out, marking test as succeeded
+    printf("Test PASSED. Not initial thread\n");
+    return NULL;
+  }
+
+  // Limit depth of recursion for second run. It can't exceed one for first run.
+  _kp_rec_count = _rec_count;
+  _rec_count = 0;
+
+  set_signal_handler();
+  if (! setjmp(context)) {
+    do_overflow();
+  }
+
+  if (_last_si_code == SEGV_ACCERR) {
+      ++ _failures;
+      fprintf(stderr,"Test FAILED. Stack guard page is still there at %d\n", _rec_count);
+  } else if (_last_si_code == -1) {
+      printf("Test PASSED. No stack guard page is present. Maximum recursion level reached at %d\n", _rec_count);
+  }
+  else{
+      printf("Test PASSED. No stack guard page is present. SIGSEGV(%d) at %d\n", _last_si_code, _rec_count);
+  }
+
+  return NULL;
+}
+
+void usage() {
+  fprintf(stderr, "Usage: invoke test_java_overflow\n");
+  fprintf(stderr, "       invoke test_native_overflow\n");
+  exit(7);
+}
+
+
+int main (int argc, const char** argv) {
+  JavaVMInitArgs vm_args;
+  JavaVMOption options[2];
+  JNIEnv* env;
+
+  printf("Test started with pid: %ld\n", (long) getpid());
+
+  options[0].optionString = "-Xint";
+  options[1].optionString = "-Xss320k";
+
+  vm_args.version = JNI_VERSION_1_2;
+  vm_args.ignoreUnrecognized = JNI_TRUE;
+  vm_args.options = options;
+  vm_args.nOptions = 2;
+
+  if (JNI_CreateJavaVM (&_jvm, (void **)&env, &vm_args) < 0 ) {
+    fprintf(stderr, "Test ERROR. Can't create JavaVM\n");
+    exit(7);
+  }
+
+  pthread_t thr;
+
+  if (argc > 1 && strcmp(argv[1], "test_java_overflow") == 0) {
+    printf("\nTesting JAVA_OVERFLOW\n");
+
+    printf("Testing stack guard page behaviour for other thread\n");
+    pthread_create (&thr, NULL, run_java_overflow, NULL);
+    pthread_join (thr, NULL);
+
+    printf("Testing stack guard page behaviour for initial thread\n");
+    run_java_overflow(NULL);
+    // This test crash on error
+    exit(0);
+  }
+
+  if (argc > 1 && strcmp(argv[1], "test_native_overflow") == 0) {
+    printf("\nTesting NATIVE_OVERFLOW\n");
+
+    printf("Testing stack guard page behaviour for other thread\n");
+    pthread_create (&thr, NULL, run_native_overflow, NULL);
+    pthread_join (thr, NULL);
+
+    printf("Testing stack guard page behaviour for initial thread\n");
+    run_native_overflow(NULL);
+
+    exit((_failures > 0) ? 1 : 0);
+  }
+
+  fprintf(stderr, "Test ERROR. Unknown parameter %s\n", ((argc > 1) ? argv[1] : "none"));
+  usage();
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/test/runtime/StackGuardPages/testme.sh	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,60 @@
+#!/bin/sh
+
+#
+# @test testme.sh
+# @summary Stack guard pages should be installed correctly and removed when thread is detached
+# @run shell testme.sh
+#
+
+if [ "${TESTSRC}" = "" ]
+then
+  TESTSRC=${PWD}
+  echo "TESTSRC not set.  Using "${TESTSRC}" as default"
+fi
+echo "TESTSRC=${TESTSRC}"
+## Adding common setup Variables for running shell tests.
+. ${TESTSRC}/../../test_env.sh
+
+if [ "${VM_OS}" != "linux" ]
+then
+  echo "Test only valid for Linux"
+  exit 0
+fi
+
+gcc_cmd=`which gcc`
+if [ "x$gcc_cmd" = "x" ]; then
+  echo "WARNING: gcc not found. Cannot execute test." 2>&1
+  exit 0;
+fi
+
+CFLAGS=-m${VM_BITS}
+
+LD_LIBRARY_PATH=.:${TESTJAVA}/jre/lib/${VM_CPU}/${VM_TYPE}:${TESTJAVA}/lib/${VM_CPU}/${VM_TYPE}:/usr/lib:$LD_LIBRARY_PATH
+export LD_LIBRARY_PATH
+
+echo "Architecture: ${VM_CPU}"
+echo "Compilation flag: ${CFLAGS}"
+echo "VM type: ${VM_TYPE}"
+echo "LD_LIBRARY_PATH: ${LD_LIBRARY_PATH}"
+
+# Note pthread may not be found thus invoke creation will fail to be created.
+# Check to ensure you have a /usr/lib/libpthread.so if you don't please look
+# for /usr/lib/`uname -m`-linux-gnu version ensure to add that path to below compilation.
+
+cp ${TESTSRC}/DoOverflow.java .
+${COMPILEJAVA}/bin/javac DoOverflow.java
+
+$gcc_cmd -DLINUX -g3 ${CFLAGS} -o invoke \
+    -I${TESTJAVA}/include -I${TESTJAVA}/include/linux \
+    -L${TESTJAVA}/jre/lib/${VM_CPU}/${VM_TYPE} \
+    -L${TESTJAVA}/lib/${VM_CPU}/${VM_TYPE} \
+     ${TESTSRC}/invoke.c -ljvm -lpthread
+
+if [ $? -ne 0 ] ; then
+    echo "Compile failed, Ignoring failed compilation and forcing the test to pass"
+    exit 0
+fi
+
+./invoke test_java_overflow
+./invoke test_native_overflow
+exit $?
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/test/runtime/whitebox/WBStackSize.java	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 2014, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/*
+ * @test WBStackSize
+ * @summary verify that whitebox functions getThreadFullStackSize() and getThreadRemainingStackSize are working
+ * @library /testlibrary /testlibrary/whitebox
+ * @build WBStackSize
+ * @run main ClassFileInstaller sun.hotspot.WhiteBox
+ * @run main/othervm -Xbootclasspath/a:. -XX:+UnlockDiagnosticVMOptions -XX:+WhiteBoxAPI -Xss512k WBStackSize
+ */
+
+/*
+ * The test may product a false failure if too big StackYellowPages/StackRedPages/ShackShadowPages
+ * VM options are specified. The proper test would retrieve the page size from VM and account for these options
+ * instead of check below:
+ *     Math.abs(actualStackSize - configStackSize) > configStackSize * 0.1
+ *
+ * Please file a test bug, if this is a problem.
+ */
+
+import com.sun.management.HotSpotDiagnosticMXBean;
+import sun.hotspot.WhiteBox;
+
+public class WBStackSize {
+
+    static final long K = 1024;
+
+    static final long MIN_STACK_SIZE = 8 * K;
+    static final long MAX_STACK_SIZE_ALLOCATED_IN_MAIN = 200 * K; // current value is about 130k on 64-bit platforms
+
+    static final WhiteBox wb = WhiteBox.getWhiteBox();
+
+    static long stackSizeOnOverflow = -1;
+
+    static int eatAllStack() {
+        return eatAllStack() * 2;
+    }
+
+    static void testStackOverflow() {
+
+        stackSizeOnOverflow = wb.getThreadRemainingStackSize();
+
+        if (stackSizeOnOverflow > MIN_STACK_SIZE) {
+
+            try {
+                testStackOverflow();
+            } catch (StackOverflowError e) {
+                // We caught SOE too early. The error will be reported in main()
+            }
+
+        } else {
+
+            try {
+                eatAllStack();
+                throw new RuntimeException("Haven't caught StackOverflowError at all");
+            } catch (StackOverflowError e) {
+                // OK: we caught the anticipated error
+            }
+        }
+    }
+
+    public static void main(String[] args) {
+        HotSpotDiagnosticMXBean bean = sun.management.ManagementFactoryHelper.getDiagnosticMXBean();
+        long configStackSize = Long.valueOf(bean.getVMOption("ThreadStackSize").getValue()) * K;
+
+        System.out.println("ThreadStackSize VM option: " + configStackSize);
+
+        long actualStackSize = wb.getThreadStackSize();
+        System.out.println("Full stack size: " + actualStackSize);
+
+        if (Math.abs(actualStackSize - configStackSize) > configStackSize * 0.1) {
+            throw new RuntimeException("getThreadFullStackSize value [" + actualStackSize
+                                     + "] should be within 90%..110% of the value returned by HotSpotDiagnosticMXBean");
+        }
+
+        long remainingStackSize = wb.getThreadRemainingStackSize();
+        System.out.println("Remaining stack size in main(): " + remainingStackSize);
+
+        // Up to 200k can be already allocated by VM
+        if (remainingStackSize > configStackSize
+                || (configStackSize > MAX_STACK_SIZE_ALLOCATED_IN_MAIN
+                && remainingStackSize < configStackSize - MAX_STACK_SIZE_ALLOCATED_IN_MAIN)) {
+
+            throw new RuntimeException("getThreadRemainingStackSize value [" + remainingStackSize
+                                     + "] should be at least ThreadStackSize value [" + configStackSize + "] minus ["
+                                     + MAX_STACK_SIZE_ALLOCATED_IN_MAIN + "]");
+        }
+
+        testStackOverflow();
+
+        if (stackSizeOnOverflow > MIN_STACK_SIZE) {
+            throw new RuntimeException("Caught StackOverflowError too early: when there were "
+                                     + stackSizeOnOverflow + " bytes in stack");
+        } else if (stackSizeOnOverflow < 0) {
+            throw new RuntimeException("Internal test error: stackRemainingSize < 0");
+        } else {
+            System.out.println("Caught StackOverflowError as expected");
+        }
+    }
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/test/serviceability/jvmti/GetObjectSizeOverflow.java	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2014 Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+import java.io.PrintWriter;
+import com.oracle.java.testlibrary.*;
+
+/*
+ * Test to verify GetObjectSize does not overflow on a 600M element int[]
+ *
+ * @test
+ * @bug 8027230
+ * @library /testlibrary
+ * @build GetObjectSizeOverflowAgent
+ * @run main ClassFileInstaller GetObjectSizeOverflowAgent
+ * @run main GetObjectSizeOverflow
+ */
+public class GetObjectSizeOverflow {
+    public static void main(String[] args) throws Exception  {
+
+        if (!Platform.is64bit()) {
+            System.out.println("Test needs a 4GB heap and can only be run as a 64bit process, skipping.");
+            return;
+        }
+
+        PrintWriter pw = new PrintWriter("MANIFEST.MF");
+        pw.println("Premain-Class: GetObjectSizeOverflowAgent");
+        pw.close();
+
+        ProcessBuilder pb = new ProcessBuilder();
+        pb.command(new String[] { JDKToolFinder.getJDKTool("jar"), "cmf", "MANIFEST.MF", "agent.jar", "GetObjectSizeOverflowAgent.class"});
+        pb.start().waitFor();
+
+        ProcessBuilder pt = ProcessTools.createJavaProcessBuilder(true, "-Xmx4000m", "-javaagent:agent.jar",  "GetObjectSizeOverflowAgent");
+        OutputAnalyzer output = new OutputAnalyzer(pt.start());
+
+        if (output.getStdout().contains("Could not reserve enough space") || output.getStderr().contains("java.lang.OutOfMemoryError")) {
+            System.out.println("stdout: " + output.getStdout());
+            System.out.println("stderr: " + output.getStderr());
+            System.out.println("Test could not reserve or allocate enough space, skipping");
+            return;
+        }
+
+        output.stdoutShouldContain("GetObjectSizeOverflow passed");
+    }
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/test/serviceability/jvmti/GetObjectSizeOverflowAgent.java	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2014, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+import java.lang.instrument.*;
+
+public class GetObjectSizeOverflowAgent {
+
+    static Instrumentation instrumentation;
+
+    public static void premain(String agentArgs, Instrumentation instrumentation) {
+        GetObjectSizeOverflowAgent.instrumentation = instrumentation;
+    }
+
+    public static void main(String[] args) throws Exception {
+        int[] a = new int[600_000_000];
+        long size = instrumentation.getObjectSize(a);
+
+        if (size < 2_400_000_000L) {
+            throw new RuntimeException("Invalid size of array, expected >= 2400000000, got " + size);
+        }
+
+        System.out.println("GetObjectSizeOverflow passed");
+    }
+}
--- a/hotspot/test/testlibrary/whitebox/sun/hotspot/WhiteBox.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/hotspot/test/testlibrary/whitebox/sun/hotspot/WhiteBox.java	Wed Jul 05 19:43:34 2017 +0200
@@ -150,6 +150,8 @@
   public native int stressVirtualSpaceResize(long reservedSpaceSize, long magnitude, long iterations);
   public native void runMemoryUnitTests();
   public native void readFromNoaccessArea();
+  public native long getThreadStackSize();
+  public native long getThreadRemainingStackSize();
 
   // CPU features
   public native String getCPUFeatures();
--- a/jdk/.hgtags	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/.hgtags	Wed Jul 05 19:43:34 2017 +0200
@@ -258,3 +258,4 @@
 c7c8002d02721e02131d104549ebeb8b379fb8d2 jdk9-b13
 5c7a17a81afd0906b53ee31d95a3211c96ff6b25 jdk9-b14
 4537360f09fe23ab339ee588747b657feb12d0c8 jdk9-b15
+ab7d2c565b0de5bee1361d282d4029371327fc9e jdk9-b16
--- a/jdk/make/Bundles.gmk	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/make/Bundles.gmk	Wed Jul 05 19:43:34 2017 +0200
@@ -74,19 +74,16 @@
   JDK_TARGET_LIST := $(subst $(JDK_IMAGE_DIR)/,$(JDK_BUNDLE_DIR)/Home/,$(JDK_FILE_LIST))
   JRE_TARGET_LIST := $(subst $(JRE_IMAGE_DIR)/,$(JRE_BUNDLE_DIR)/Home/,$(JRE_FILE_LIST))
 
-  # The old builds implementation of this did not preserve symlinks so
-  # make sure they are followed and the contents copied instead.
-  # To fix this, remove -L
   # Copy empty directories (jre/lib/applet).
   $(JDK_BUNDLE_DIR)/Home/%: $(JDK_IMAGE_DIR)/%
 	$(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
 	$(MKDIR) -p $(@D)
-	if [ -d "$<" ]; then $(MKDIR) -p $@; else $(CP) -f -R -L '$<' '$@'; fi
+	if [ -d "$<" ]; then $(MKDIR) -p $@; else $(CP) -f -R -P '$<' '$@'; fi
 
   $(JRE_BUNDLE_DIR)/Home/%: $(JRE_IMAGE_DIR)/%
 	$(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
 	$(MKDIR) -p $(@D)
-	if [ -d "$<" ]; then $(MKDIR) -p $@; else $(CP) -f -R -L '$<' '$@'; fi
+	if [ -d "$<" ]; then $(MKDIR) -p $@; else $(CP) -f -R -P '$<' '$@'; fi
 
   $(JDK_BUNDLE_DIR)/MacOS/libjli.dylib:
 	$(ECHO) Creating link $(patsubst $(OUTPUT_ROOT)/%,%,$@)
--- a/jdk/make/CompileJavaClasses.gmk	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/make/CompileJavaClasses.gmk	Wed Jul 05 19:43:34 2017 +0200
@@ -373,7 +373,7 @@
           JAVAC_FLAGS := -cp $(JDK_OUTPUTDIR)/classes, \
           SRC := $(JDK_OUTPUTDIR)/gensrc_ab/32bit, \
           BIN := $(JDK_OUTPUTDIR)/classes_ab/32bit, \
-          HEADERS := $(JDK_OUTPUTDIR)/gensrc_headers))
+          HEADERS := $(JDK_OUTPUTDIR)/gensrc_headers_ab/32))
 
       $(BUILD_ACCESSBRIDGE_32): $(BUILD_JDK)
 
@@ -382,7 +382,7 @@
           JAVAC_FLAGS := -cp $(JDK_OUTPUTDIR)/classes, \
           SRC := $(JDK_OUTPUTDIR)/gensrc_ab/legacy, \
           BIN := $(JDK_OUTPUTDIR)/classes_ab/legacy, \
-          HEADERS := $(JDK_OUTPUTDIR)/gensrc_headers))
+          HEADERS := $(JDK_OUTPUTDIR)/gensrc_headers_ab/legacy))
 
       $(BUILD_ACCESSBRIDGE_LEGACY): $(BUILD_JDK)
 
@@ -393,7 +393,7 @@
           JAVAC_FLAGS := -cp $(JDK_OUTPUTDIR)/classes, \
           SRC := $(JDK_OUTPUTDIR)/gensrc_ab/64bit, \
           BIN := $(JDK_OUTPUTDIR)/classes_ab/64bit, \
-          HEADERS := $(JDK_OUTPUTDIR)/gensrc_headers))
+          HEADERS := $(JDK_OUTPUTDIR)/gensrc_headers_ab/64))
 
       $(BUILD_ACCESSBRIDGE_64): $(BUILD_JDK)
 
--- a/jdk/make/CompileLaunchers.gmk	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/make/CompileLaunchers.gmk	Wed Jul 05 19:43:34 2017 +0200
@@ -428,7 +428,7 @@
   UNPACKEXE_CFLAGS := -DSYSTEM_ZLIB
   UNPACKEXE_ZIPOBJS := -lz
 else
-  UNPACKEXE_CFLAGS := -I$(JDK_TOPDIR)/src/share/native/java/util/zip/zlib-1.2.5
+  UNPACKEXE_CFLAGS := -I$(JDK_TOPDIR)/src/share/native/java/util/zip/zlib-1.2.8
   UNPACKEXE_ZIPOBJS := $(JDK_OUTPUTDIR)/objs/libzip/zcrc32$(OBJ_SUFFIX) \
       $(JDK_OUTPUTDIR)/objs/libzip/deflate$(OBJ_SUFFIX) \
       $(JDK_OUTPUTDIR)/objs/libzip/trees$(OBJ_SUFFIX) \
@@ -442,11 +442,6 @@
 
 endif
 
-ifeq ($(OPENJDK_TARGET_CPU_ARCH), sparc)
-  UNPACKEXE_CFLAGS += -xregs=no%appl
-  UNPACKEXE_LDFLAGS_solaris += -xmemalign=4s
-endif
-
 UNPACKEXE_LANG := C
 ifeq ($(OPENJDK_TARGET_OS), solaris)
   UNPACKEXE_LANG := C++
--- a/jdk/make/CreateJars.gmk	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/make/CreateJars.gmk	Wed Jul 05 19:43:34 2017 +0200
@@ -552,40 +552,53 @@
 
 ##########################################################################################
 
-SRC_ZIP_INCLUDES = \
-    com/sun/corba \
-    com/sun/image/codec/jpeg \
-    com/sun/imageio \
-    com/sun/java_cup \
-    com/sun/javadoc \
-    com/sun/java/swing \
-    com/sun/jmx \
-    com/sun/naming \
-    com/sun/org/apache \
-    com/sun/security/auth \
-    com/sun/security/jgss \
-    com/sun/source \
-    java \
-    javax/accessibility \
-    javax/annotation \
-    javax/imageio \
-    javax/lang \
-    javax/management \
-    javax/naming \
-    javax/print \
-    javax/rmi \
-    javax/script \
-    javax/security \
-    javax/sound \
-    javax/sql \
-    javax/swing \
-    javax/tools \
-    javax/xml \
-    org/ietf \
-    org/omg \
-    org/w3c/dom \
-    org/xml/sax \
-    #
+ifdef OPENJDK
+    SRC_ZIP_INCLUDES = \
+        com \
+        java \
+        javax \
+        jdk \
+        org \
+        sun \
+        #
+    SRC_ZIP_EXCLUDES =
+else
+    SRC_ZIP_INCLUDES = \
+        com/sun/corba \
+        com/sun/image/codec/jpeg \
+        com/sun/imageio \
+        com/sun/java_cup \
+        com/sun/javadoc \
+        com/sun/java/swing \
+        com/sun/jmx \
+        com/sun/naming \
+        com/sun/org/apache \
+        com/sun/security/auth \
+        com/sun/security/jgss \
+        com/sun/source \
+        java \
+        javax/accessibility \
+        javax/annotation \
+        javax/imageio \
+        javax/lang \
+        javax/management \
+        javax/naming \
+        javax/print \
+        javax/rmi \
+        javax/script \
+        javax/security \
+        javax/sound \
+        javax/sql \
+        javax/swing \
+        javax/tools \
+        javax/xml \
+        org/ietf \
+        org/omg \
+        org/w3c/dom \
+        org/xml/sax \
+        #
+    SRC_ZIP_EXCLUDES = javax/swing/beaninfo
+endif
 
 SRC_ZIP_SRCS = $(JDK_TOPDIR)/src/share/classes $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/classes
 SRC_ZIP_SRCS += $(JDK_OUTPUTDIR)/gensrc
@@ -616,7 +629,7 @@
 $(eval $(call SetupZipArchive,BUILD_SRC_ZIP, \
     SRC := $(SRC_ZIP_SRCS) $(IMAGES_OUTPUTDIR)/src, \
     INCLUDES := $(SRC_ZIP_INCLUDES) launcher, \
-    EXCLUDES := javax/swing/beaninfo, \
+    EXCLUDES := $(SRC_ZIP_EXCLUDES), \
     SUFFIXES := .java .c .h, \
     ZIP := $(IMAGES_OUTPUTDIR)/src.zip, \
     EXTRA_DEPS := $(LAUNCHER_ZIP_SRC)))
--- a/jdk/make/Setup.gmk	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/make/Setup.gmk	Wed Jul 05 19:43:34 2017 +0200
@@ -27,7 +27,7 @@
 
 # To build with all warnings enabled, do the following:
 # make JAVAC_WARNINGS="-Xlint:all -Xmaxwarns 10000"
-JAVAC_WARNINGS := -Xlint:-unchecked,-deprecation,-overrides,auxiliaryclass,cast,classfile,dep-ann,divzero,empty,overloads,serial,static,try,varargs -Werror
+JAVAC_WARNINGS := -Xlint:-unchecked,-deprecation,-overrides,auxiliaryclass,cast,classfile,dep-ann,divzero,empty,fallthrough,overloads,serial,static,try,varargs -Werror
 
 # Any java code executed during a JDK build to build other parts of the JDK must be 
 # executed by the bootstrap JDK (probably with -Xbootclasspath/p: ) and for this 
--- a/jdk/make/lib/Awt2dLibraries.gmk	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/make/lib/Awt2dLibraries.gmk	Wed Jul 05 19:43:34 2017 +0200
@@ -1251,7 +1251,7 @@
   LIBSPLASHSCREEN_LDFLAGS_SUFFIX :=
 
   ifneq ($(USE_EXTERNAL_LIBZ), true)
-    LIBSPLASHSCREEN_DIRS += $(JDK_TOPDIR)/src/share/native/java/util/zip/zlib-1.2.5
+    LIBSPLASHSCREEN_DIRS += $(JDK_TOPDIR)/src/share/native/java/util/zip/zlib-1.2.8
     LIBSPLASHSCREEN_CFLAGS += $(ZLIB_CPPFLAGS)
   endif
 
--- a/jdk/make/lib/CoreLibraries.gmk	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/make/lib/CoreLibraries.gmk	Wed Jul 05 19:43:34 2017 +0200
@@ -231,9 +231,9 @@
 BUILD_LIBZIP_EXCLUDES :=
 ifeq ($(USE_EXTERNAL_LIBZ), true)
   LIBZ := -lz
-  LIBZIP_EXCLUDES += zlib-1.2.5
+  LIBZIP_EXCLUDES += zlib-1.2.8
 else
-  ZLIB_CPPFLAGS := -I$(JDK_TOPDIR)/src/share/native/java/util/zip/zlib-1.2.5
+  ZLIB_CPPFLAGS := -I$(JDK_TOPDIR)/src/share/native/java/util/zip/zlib-1.2.8
 endif
 
 BUILD_LIBZIP_REORDER :=
@@ -410,7 +410,7 @@
 endif
 
 ifneq ($(USE_EXTERNAL_LIBZ), true)
-  BUILD_LIBJLI_SRC_DIRS += $(JDK_TOPDIR)/src/share/native/java/util/zip/zlib-1.2.5
+  BUILD_LIBJLI_SRC_DIRS += $(JDK_TOPDIR)/src/share/native/java/util/zip/zlib-1.2.8
   LIBJLI_CFLAGS += $(ZLIB_CPPFLAGS)
   BUILD_LIBJLI_FILES += \
       inflate.c \
--- a/jdk/make/lib/PlatformLibraries.gmk	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/make/lib/PlatformLibraries.gmk	Wed Jul 05 19:43:34 2017 +0200
@@ -143,7 +143,8 @@
     define SetupAccessBridge
       # Parameter 1 Suffix
       # Parameter 2 Machine
-      # Parameter 3 ACCESSBRIDGE_ARCH_ suffix
+      # Parameter 3 ACCESSBRIDGE_ARCH_ suffix and name of directory where gensrc headers
+      #             are found.
 
       $(call SetupNativeCompilation,BUILD_JAWTACCESSBRIDGE$1, \
           LIBRARY = JAWTAccessBridge$1, \
@@ -153,7 +154,8 @@
           LANG := C++, \
           OPTIMIZATION := LOW, \
           CFLAGS := $(CFLAGS_JDKLIB) \
-              -DACCESSBRIDGE_ARCH_$3, \
+              -DACCESSBRIDGE_ARCH_$3 \
+              -I$(JDK_OUTPUTDIR)/gensrc_headers_ab/$3, \
           LDFLAGS := $(LDFLAGS_JDKLIB) kernel32.lib user32.lib gdi32.lib \
               winspool.lib jawt.lib comdlg32.lib advapi32.lib shell32.lib \
               ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib \
@@ -179,7 +181,8 @@
           LANG := C++, \
           OPTIMIZATION := LOW, \
           CFLAGS := $(CFLAGS_JDKLIB) \
-              -DACCESSBRIDGE_ARCH_$3, \
+              -DACCESSBRIDGE_ARCH_$3 \
+              -I$(JDK_OUTPUTDIR)/gensrc_headers_ab/$3, \
           LDFLAGS := $(LDFLAGS_JDKLIB) kernel32.lib user32.lib gdi32.lib \
               winspool.lib comdlg32.lib advapi32.lib shell32.lib \
               ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib \
@@ -204,7 +207,8 @@
           LANG := C++, \
           OPTIMIZATION := LOW, \
           CFLAGS := $(filter-out -MD, $(CFLAGS_JDKLIB)) -MT \
-              -DACCESSBRIDGE_ARCH_$3, \
+              -DACCESSBRIDGE_ARCH_$3 \
+              -I$(JDK_OUTPUTDIR)/gensrc_headers_ab/$3, \
           LDFLAGS := $(LDFLAGS_JDKLIB) kernel32.lib user32.lib gdi32.lib \
               winspool.lib comdlg32.lib advapi32.lib shell32.lib \
               ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib \
@@ -225,7 +229,7 @@
 
     ifeq ($(OPENJDK_TARGET_CPU_BITS), 32)
       $(eval $(call SetupAccessBridge,-32,I386,32))
-      $(eval $(call SetupAccessBridge,,I386,LEGACY))
+      $(eval $(call SetupAccessBridge,,I386,legacy))
     else
       $(eval $(call SetupAccessBridge,-64,X64,64))
     endif
--- a/jdk/make/profile-rtjar-includes.txt	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/make/profile-rtjar-includes.txt	Wed Jul 05 19:43:34 2017 +0200
@@ -88,7 +88,7 @@
     java/sql \
     javax/rmi/ssl \
     javax/sql \
-    javax/transaction \
+    javax/transaction/xa \
     javax/xml \
     org/w3c \
     org/xml/sax \
@@ -223,7 +223,8 @@
     javax/management/remote/rmi/_RMIConnection_Stub.class \
     javax/management/remote/rmi/_RMIServerImpl_Tie.class \
     javax/management/remote/rmi/_RMIServer_Stub.class \
-    javax/rmi/*.class
+    javax/rmi/*.class \
+    javax/transaction/*.class
 
 FULL_JRE_RTJAR_EXCLUDE_TYPES :=
 
--- a/jdk/src/share/classes/com/sun/java/util/jar/pack/ConstantPool.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/java/util/jar/pack/ConstantPool.java	Wed Jul 05 19:43:34 2017 +0200
@@ -512,7 +512,7 @@
     }
     static String qualifiedStringValue(String s1, String s234) {
         // Qualification by dot must decompose uniquely.  Second string might already be qualified.
-        assert(s1.indexOf(".") < 0);
+        assert(s1.indexOf('.') < 0);
         return s1+"."+s234;
     }
 
--- a/jdk/src/share/classes/com/sun/jndi/cosnaming/CorbanameUrl.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/jndi/cosnaming/CorbanameUrl.java	Wed Jul 05 19:43:34 2017 +0200
@@ -102,7 +102,7 @@
         }
         location = url.substring(addrStart, addrEnd);
 
-        int keyStart = location.indexOf("/");
+        int keyStart = location.indexOf('/');
         if (keyStart >= 0) {
             // Has key string
             if (keyStart == (location.length() -1)) {
--- a/jdk/src/share/classes/com/sun/jndi/rmi/registry/RegistryContext.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/jndi/rmi/registry/RegistryContext.java	Wed Jul 05 19:43:34 2017 +0200
@@ -336,7 +336,7 @@
         String url = "rmi://";
 
         // Enclose IPv6 literal address in '[' and ']'
-        url = (host.indexOf(":") > -1) ? url + "[" + host + "]" :
+        url = (host.indexOf(':') > -1) ? url + "[" + host + "]" :
                                          url + host;
         if (port > 0) {
             url += ":" + Integer.toString(port);
--- a/jdk/src/share/classes/com/sun/jndi/toolkit/url/GenericURLContext.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/jndi/toolkit/url/GenericURLContext.java	Wed Jul 05 19:43:34 2017 +0200
@@ -149,7 +149,7 @@
       * foo:rest/of/name                        foo:
       */
     protected String getURLPrefix(String url) throws NamingException {
-        int start = url.indexOf(":");
+        int start = url.indexOf(':');
 
         if (start < 0) {
             throw new OperationNotSupportedException("Invalid URL: " + url);
@@ -160,7 +160,7 @@
             start += 2;  // skip double slash
 
             // find last slash
-            int posn = url.indexOf("/", start);
+            int posn = url.indexOf('/', start);
             if (posn >= 0) {
                 start = posn;
             } else {
--- a/jdk/src/share/classes/com/sun/rmi/rmid/ExecOptionPermission.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/rmi/rmid/ExecOptionPermission.java	Wed Jul 05 19:43:34 2017 +0200
@@ -303,7 +303,7 @@
 
             offset = pname.length() - 1;
 
-            while ((last = pname.lastIndexOf(".", offset)) != -1) {
+            while ((last = pname.lastIndexOf('.', offset)) != -1) {
 
                 pname = pname.substring(0, last+1) + "*";
                 x = permissions.get(pname);
@@ -318,7 +318,7 @@
             pname = p.getName();
             offset = pname.length() - 1;
 
-            while ((last = pname.lastIndexOf("=", offset)) != -1) {
+            while ((last = pname.lastIndexOf('=', offset)) != -1) {
 
                 pname = pname.substring(0, last+1) + "*";
                 x = permissions.get(pname);
--- a/jdk/src/share/classes/com/sun/rowset/CachedRowSetImpl.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/rowset/CachedRowSetImpl.java	Wed Jul 05 19:43:34 2017 +0200
@@ -6831,7 +6831,7 @@
             // table name else isolate table name.
 
             indexFrom = command.toLowerCase().indexOf("from");
-            indexComma = command.indexOf(",", indexFrom);
+            indexComma = command.indexOf(',', indexFrom);
 
             if(indexComma == -1) {
                 // implies only one table
--- a/jdk/src/share/classes/com/sun/rowset/JoinRowSetImpl.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/rowset/JoinRowSetImpl.java	Wed Jul 05 19:43:34 2017 +0200
@@ -910,7 +910,7 @@
 
         // now remove the last ","
         strWhereClause = strWhereClause.substring
-             (0, strWhereClause.lastIndexOf(","));
+             (0, strWhereClause.lastIndexOf(','));
 
         // Add from clause
         strWhereClause = strWhereClause.concat(" from ");
@@ -920,7 +920,7 @@
 
         //Remove the last ","
         strWhereClause = strWhereClause.substring
-             (0, strWhereClause.lastIndexOf(","));
+             (0, strWhereClause.lastIndexOf(','));
 
         // Add the where clause
         strWhereClause = strWhereClause.concat(" where ");
--- a/jdk/src/share/classes/com/sun/rowset/internal/WebRowSetXmlWriter.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/rowset/internal/WebRowSetXmlWriter.java	Wed Jul 05 19:43:34 2017 +0200
@@ -240,7 +240,7 @@
             // Remove the string after "@xxxx"
             // before writing it to the xml file.
             String strProviderInstance = (caller.getSyncProvider()).toString();
-            String strProvider = strProviderInstance.substring(0, (caller.getSyncProvider()).toString().indexOf("@"));
+            String strProvider = strProviderInstance.substring(0, (caller.getSyncProvider()).toString().indexOf('@'));
 
             propString("sync-provider-name", strProvider);
             propString("sync-provider-vendor", "Oracle Corporation");
--- a/jdk/src/share/classes/com/sun/rowset/internal/XmlReaderContentHandler.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/rowset/internal/XmlReaderContentHandler.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1147,7 +1147,7 @@
             if (nullValue) {
                 rs.setSyncProvider(null);
             } else {
-                String str = s.substring(0,s.indexOf("@")+1);
+                String str = s.substring(0,s.indexOf('@')+1);
                 rs.setSyncProvider(str);
             }
             break;
--- a/jdk/src/share/classes/com/sun/rowset/internal/XmlResolver.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/rowset/internal/XmlResolver.java	Wed Jul 05 19:43:34 2017 +0200
@@ -39,7 +39,7 @@
 public class XmlResolver implements EntityResolver {
 
         public InputSource resolveEntity(String publicId, String systemId) {
-           String schemaName = systemId.substring(systemId.lastIndexOf("/"));
+           String schemaName = systemId.substring(systemId.lastIndexOf('/'));
 
            if(systemId.startsWith("http://java.sun.com/xml/ns/jdbc")) {
                return new InputSource(this.getClass().getResourceAsStream(schemaName));
--- a/jdk/src/share/classes/com/sun/security/auth/module/JndiLoginModule.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/security/auth/module/JndiLoginModule.java	Wed Jul 05 19:43:34 2017 +0200
@@ -694,7 +694,7 @@
             throw new LoginException("Error: no CallbackHandler available " +
                 "to garner authentication information from the user");
 
-        String protocol = userProvider.substring(0, userProvider.indexOf(":"));
+        String protocol = userProvider.substring(0, userProvider.indexOf(':'));
 
         Callback[] callbacks = new Callback[2];
         callbacks[0] = new NameCallback(protocol + " "
--- a/jdk/src/share/classes/com/sun/security/auth/module/LdapLoginModule.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/security/auth/module/LdapLoginModule.java	Wed Jul 05 19:43:34 2017 +0200
@@ -400,7 +400,7 @@
 
         // Add any JNDI properties to the environment
         for (String key : options.keySet()) {
-            if (key.indexOf(".") > -1) {
+            if (key.indexOf('.') > -1) {
                 ldapEnvironment.put(key, options.get(key));
             }
         }
--- a/jdk/src/share/classes/com/sun/tools/example/debug/gui/CommandInterpreter.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/tools/example/debug/gui/CommandInterpreter.java	Wed Jul 05 19:43:34 2017 +0200
@@ -857,7 +857,7 @@
                 bpSpec = runtime.createClassLineBreakpoint(classId, lineNumber);
             } else {
                 // Try stripping method from class.method token.
-                int idot = token.lastIndexOf(".");
+                int idot = token.lastIndexOf('.');
                 if ( (idot <= 0) ||        /* No dot or dot in first char */
                      (idot >= token.length() - 1) ) { /* dot in last char */
                     return null;
--- a/jdk/src/share/classes/com/sun/tools/example/debug/tty/Commands.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/tools/example/debug/tty/Commands.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1079,7 +1079,7 @@
                 }
             } else {
                 // Try stripping method from class.method token.
-                int idot = token.lastIndexOf(".");
+                int idot = token.lastIndexOf('.');
                 if ( (idot <= 0) ||                     /* No dot or dot in first char */
                      (idot >= token.length() - 1) ) { /* dot in last char */
                     printBreakpointCommandUsage(atForm, inForm);
--- a/jdk/src/share/classes/com/sun/tools/hat/internal/server/AllClassesQuery.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/com/sun/tools/hat/internal/server/AllClassesQuery.java	Wed Jul 05 19:43:34 2017 +0200
@@ -67,7 +67,7 @@
                 continue;
             }
             String name = clazz.getName();
-            int pos = name.lastIndexOf(".");
+            int pos = name.lastIndexOf('.');
             String pkg;
             if (name.startsWith("[")) {         // Only in ancient heap dumps
                 pkg = "<Arrays>";
--- a/jdk/src/share/classes/java/applet/Applet.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/applet/Applet.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 1995, 2013, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 1995, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -86,6 +86,7 @@
 
     /**
      * Read an applet from an object input stream.
+     * @param  s  an object input stream.
      * @exception HeadlessException if
      * <code>GraphicsEnvironment.isHeadless()</code> returns
      * <code>true</code>
--- a/jdk/src/share/classes/java/applet/AppletContext.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/applet/AppletContext.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 1995, 2013, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 1995, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -152,7 +152,7 @@
      * For security reasons, mapping of streams and keys exists for each
      * codebase. In other words, applet from one codebase cannot access
      * the streams created by an applet from a different codebase
-     * <p>
+     *
      * @param key key with which the specified value is to be associated.
      * @param stream stream to be associated with the specified key. If this
      *               parameter is <code>null</code>, the specified key is removed
@@ -172,7 +172,7 @@
      * For security reasons, mapping of streams and keys exists for each
      * codebase. In other words, applet from one codebase cannot access
      * the streams created by an applet from a different codebase
-     * <p>
+     *
      * @return the stream to which this applet context maps the key
      * @param key key whose associated stream is to be returned.
      * @since 1.4
@@ -185,7 +185,7 @@
      * For security reasons, mapping of streams and keys exists for each
      * codebase. In other words, applet from one codebase cannot access
      * the streams created by an applet from a different codebase
-     * <p>
+     *
      * @return  an Iterator of all the names of the streams in this applet
      *          context.
      * @since 1.4
--- a/jdk/src/share/classes/java/awt/geom/Path2D.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/awt/geom/Path2D.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1926,9 +1926,9 @@
      * maintains, but it may contain no more precision either.
      * If the tradeoff of precision vs. storage size in the result is
      * important then the convenience constructors in the
-     * {@link Path2D.Float#Path2D.Float(Shape, AffineTransform) Path2D.Float}
+     * {@link Path2D.Float#Float(Shape, AffineTransform) Path2D.Float}
      * and
-     * {@link Path2D.Double#Path2D.Double(Shape, AffineTransform) Path2D.Double}
+     * {@link Path2D.Double#Double(Shape, AffineTransform) Path2D.Double}
      * subclasses should be used to make the choice explicit.
      *
      * @param at the {@code AffineTransform} used to transform a
--- a/jdk/src/share/classes/java/lang/Class.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/lang/Class.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1296,7 +1296,7 @@
         String simpleName = getSimpleBinaryName();
         if (simpleName == null) { // top level class
             simpleName = getName();
-            return simpleName.substring(simpleName.lastIndexOf(".")+1); // strip the package name
+            return simpleName.substring(simpleName.lastIndexOf('.')+1); // strip the package name
         }
         // According to JLS3 "Binary Compatibility" (13.1) the binary
         // name of non-package classes (not top level) is the binary
--- a/jdk/src/share/classes/java/lang/ClassLoader.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/lang/ClassLoader.java	Wed Jul 05 19:43:34 2017 +0200
@@ -2133,7 +2133,7 @@
                 return result.booleanValue();
 
             // Check for most specific package entry
-            int dotIndex = className.lastIndexOf(".");
+            int dotIndex = className.lastIndexOf('.');
             if (dotIndex < 0) { // default package
                 result = packageAssertionStatus.get(null);
                 if (result != null)
@@ -2144,7 +2144,7 @@
                 result = packageAssertionStatus.get(className);
                 if (result != null)
                     return result.booleanValue();
-                dotIndex = className.lastIndexOf(".", dotIndex-1);
+                dotIndex = className.lastIndexOf('.', dotIndex-1);
             }
 
             // Return the classloader default
--- a/jdk/src/share/classes/java/lang/invoke/InvokerBytecodeGenerator.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/lang/invoke/InvokerBytecodeGenerator.java	Wed Jul 05 19:43:34 2017 +0200
@@ -85,7 +85,7 @@
     private InvokerBytecodeGenerator(LambdaForm lambdaForm, int localsMapSize,
                                      String className, String invokerName, MethodType invokerType) {
         if (invokerName.contains(".")) {
-            int p = invokerName.indexOf(".");
+            int p = invokerName.indexOf('.');
             className = invokerName.substring(0, p);
             invokerName = invokerName.substring(p+1);
         }
--- a/jdk/src/share/classes/java/lang/invoke/LambdaForm.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/lang/invoke/LambdaForm.java	Wed Jul 05 19:43:34 2017 +0200
@@ -607,7 +607,7 @@
                 assert(m.getName().equals("interpret" + sig.substring(sig.indexOf('_'))));
                 LambdaForm form = new LambdaForm(sig);
                 form.vmentry = m;
-                mt.form().setCachedLambdaForm(MethodTypeForm.LF_COUNTER, form);
+                form = mt.form().setCachedLambdaForm(MethodTypeForm.LF_COUNTER, form);
                 // FIXME: get rid of PREPARED_FORMS; use MethodTypeForm cache only
                 forms.put(sig, form);
             }
--- a/jdk/src/share/classes/java/lang/invoke/LambdaMetafactory.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/lang/invoke/LambdaMetafactory.java	Wed Jul 05 19:43:34 2017 +0200
@@ -313,7 +313,8 @@
      * reference expression</em> features of the Java Programming Language.
      *
      * <p>This is the general, more flexible metafactory; a streamlined version
-     * is provided by {@link #altMetafactory(MethodHandles.Lookup, String, MethodType, Object...)}.
+     * is provided by {@link #metafactory(java.lang.invoke.MethodHandles.Lookup,
+     * String, MethodType, MethodType, MethodHandle, MethodType)}.
      * A general description of the behavior of this method is provided
      * {@link LambdaMetafactory above}.
      *
--- a/jdk/src/share/classes/java/lang/invoke/MethodHandleImpl.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/lang/invoke/MethodHandleImpl.java	Wed Jul 05 19:43:34 2017 +0200
@@ -692,8 +692,7 @@
 
         lform = new LambdaForm("guardWithCatch", lambdaType.parameterCount(), names);
 
-        basicType.form().setCachedLambdaForm(MethodTypeForm.LF_GWC, lform);
-        return lform;
+        return basicType.form().setCachedLambdaForm(MethodTypeForm.LF_GWC, lform);
     }
 
     static
--- a/jdk/src/share/classes/java/lang/invoke/MethodTypeForm.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/lang/invoke/MethodTypeForm.java	Wed Jul 05 19:43:34 2017 +0200
@@ -91,8 +91,10 @@
         return lambdaForms[which];
     }
 
-    public LambdaForm setCachedLambdaForm(int which, LambdaForm form) {
-        // Should we perform some sort of CAS, to avoid racy duplication?
+    synchronized public LambdaForm setCachedLambdaForm(int which, LambdaForm form) {
+        // Simulate a CAS, to avoid racy duplication of results.
+        LambdaForm prev = lambdaForms[which];
+        if (prev != null) return prev;
         return lambdaForms[which] = form;
     }
 
--- a/jdk/src/share/classes/java/lang/reflect/Executable.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/lang/reflect/Executable.java	Wed Jul 05 19:43:34 2017 +0200
@@ -633,7 +633,7 @@
                         getConstantPool(getDeclaringClass()),
                 this,
                 getDeclaringClass(),
-                getParameterTypes(),
+                getGenericParameterTypes(),
                 TypeAnnotation.TypeAnnotationTarget.METHOD_FORMAL_PARAMETER);
     }
 
--- a/jdk/src/share/classes/java/net/CookieManager.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/net/CookieManager.java	Wed Jul 05 19:43:34 2017 +0200
@@ -294,7 +294,7 @@
                             // the path is the directory of the page/doc
                             String path = uri.getPath();
                             if (!path.endsWith("/")) {
-                                int i = path.lastIndexOf("/");
+                                int i = path.lastIndexOf('/');
                                 if (i > 0) {
                                     path = path.substring(0, i + 1);
                                 } else {
@@ -364,7 +364,7 @@
 
 
     static private boolean isInPortList(String lst, int port) {
-        int i = lst.indexOf(",");
+        int i = lst.indexOf(',');
         int val = -1;
         while (i > 0) {
             try {
@@ -375,7 +375,7 @@
             } catch (NumberFormatException numberFormatException) {
             }
             lst = lst.substring(i+1);
-            i = lst.indexOf(",");
+            i = lst.indexOf(',');
         }
         if (!lst.isEmpty()) {
             try {
--- a/jdk/src/share/classes/java/net/InetAddress.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/net/InetAddress.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1138,7 +1138,7 @@
                 // This is supposed to be an IPv6 literal
                 // Check if a numeric or string zone id is present
                 int pos;
-                if ((pos=host.indexOf ("%")) != -1) {
+                if ((pos=host.indexOf ('%')) != -1) {
                     numericZone = checkNumericZone (host);
                     if (numericZone == -1) { /* remainder of string must be an ifname */
                         ifname = host.substring (pos+1);
--- a/jdk/src/share/classes/java/net/Socket.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/net/Socket.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1017,7 +1017,7 @@
         if (isClosed())
             throw new SocketException("Socket is closed");
         if (!on) {
-            getImpl().setOption(SocketOptions.SO_LINGER, new Boolean(on));
+            getImpl().setOption(SocketOptions.SO_LINGER, on);
         } else {
             if (linger < 0) {
                 throw new IllegalArgumentException("invalid value for SO_LINGER");
--- a/jdk/src/share/classes/java/net/SocketPermission.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/net/SocketPermission.java	Wed Jul 05 19:43:34 2017 +0200
@@ -777,7 +777,7 @@
                 // Literal IPv6 address
                 host = getName().substring(1, getName().indexOf(']'));
             } else {
-                int i = getName().indexOf(":");
+                int i = getName().indexOf(':');
                 if (i == -1)
                     host = getName();
                 else {
--- a/jdk/src/share/classes/java/net/SocksSocketImpl.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/net/SocksSocketImpl.java	Wed Jul 05 19:43:34 2017 +0200
@@ -368,7 +368,7 @@
             String host = epoint.getHostString();
             // IPv6 litteral?
             if (epoint.getAddress() instanceof Inet6Address &&
-                (!host.startsWith("[")) && (host.indexOf(":") >= 0)) {
+                (!host.startsWith("[")) && (host.indexOf(':') >= 0)) {
                 host = "[" + host + "]";
             }
             try {
@@ -688,7 +688,7 @@
             String host = saddr.getHostString();
             // IPv6 litteral?
             if (saddr.getAddress() instanceof Inet6Address &&
-                (!host.startsWith("[")) && (host.indexOf(":") >= 0)) {
+                (!host.startsWith("[")) && (host.indexOf(':') >= 0)) {
                 host = "[" + host + "]";
             }
             try {
--- a/jdk/src/share/classes/java/net/URI.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/net/URI.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1851,9 +1851,9 @@
             sb.append("//");
             if (authority.startsWith("[")) {
                 // authority should (but may not) contain an embedded IPv6 address
-                int end = authority.indexOf("]");
+                int end = authority.indexOf(']');
                 String doquote = authority, dontquote = "";
-                if (end != -1 && authority.indexOf(":") != -1) {
+                if (end != -1 && authority.indexOf(':') != -1) {
                     // the authority contains an IPv6 address
                     if (end == authority.length()) {
                         dontquote = authority;
@@ -1889,8 +1889,8 @@
              * because we must not quote a literal IPv6 address
              */
             if (opaquePart.startsWith("//[")) {
-                int end =  opaquePart.indexOf("]");
-                if (end != -1 && opaquePart.indexOf(":")!=-1) {
+                int end =  opaquePart.indexOf(']');
+                if (end != -1 && opaquePart.indexOf(':')!=-1) {
                     String doquote, dontquote;
                     if (end == opaquePart.length()) {
                         dontquote = opaquePart;
--- a/jdk/src/share/classes/java/security/AccessController.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/security/AccessController.java	Wed Jul 05 19:43:34 2017 +0200
@@ -592,14 +592,24 @@
             System.getSecurityManager() != null &&
             !callerPD.impliesCreateAccessControlContext())
         {
-            ProtectionDomain nullPD = new ProtectionDomain(null, null);
-            return new AccessControlContext(new ProtectionDomain[] { nullPD });
+            return getInnocuousAcc();
         } else {
             return new AccessControlContext(callerPD, combiner, parent,
                                             context, perms);
         }
     }
 
+    private static class AccHolder {
+        // An AccessControlContext with no granted permissions.
+        // Only initialized on demand when getInnocuousAcc() is called.
+        static final AccessControlContext innocuousAcc =
+            new AccessControlContext(new ProtectionDomain[] {
+                                     new ProtectionDomain(null, null) });
+    }
+    private static AccessControlContext getInnocuousAcc() {
+        return AccHolder.innocuousAcc;
+    }
+
     private static ProtectionDomain getCallerPD(final Class <?> caller) {
         ProtectionDomain callerPd = doPrivileged
             (new PrivilegedAction<ProtectionDomain>() {
--- a/jdk/src/share/classes/java/security/BasicPermission.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/security/BasicPermission.java	Wed Jul 05 19:43:34 2017 +0200
@@ -430,7 +430,7 @@
 
         offset = path.length()-1;
 
-        while ((last = path.lastIndexOf(".", offset)) != -1) {
+        while ((last = path.lastIndexOf('.', offset)) != -1) {
 
             path = path.substring(0, last+1) + "*";
             //System.out.println("check "+path);
--- a/jdk/src/share/classes/java/security/Provider.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/security/Provider.java	Wed Jul 05 19:43:34 2017 +0200
@@ -931,7 +931,7 @@
     }
 
     private String[] getTypeAndAlgorithm(String key) {
-        int i = key.indexOf(".");
+        int i = key.indexOf('.');
         if (i < 1) {
             if (debug != null) {
                 debug.println("Ignoring invalid entry in provider "
--- a/jdk/src/share/classes/java/security/Security.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/security/Security.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1114,7 +1114,7 @@
                     // implementation of an algorithm. We are only interested
                     // in entries which lead to the implementation
                     // classes.
-                    if (currentKey.indexOf(" ") < 0) {
+                    if (currentKey.indexOf(' ') < 0) {
                         result.add(currentKey.substring(
                                                 serviceName.length() + 1));
                     }
--- a/jdk/src/share/classes/java/util/PropertyPermission.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/util/PropertyPermission.java	Wed Jul 05 19:43:34 2017 +0200
@@ -546,7 +546,7 @@
 
         offset = name.length()-1;
 
-        while ((last = name.lastIndexOf(".", offset)) != -1) {
+        while ((last = name.lastIndexOf('.', offset)) != -1) {
 
             name = name.substring(0, last+1) + "*";
             //System.out.println("check "+name);
--- a/jdk/src/share/classes/java/util/jar/JarVerifier.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/util/jar/JarVerifier.java	Wed Jul 05 19:43:34 2017 +0200
@@ -276,7 +276,7 @@
 
                 // now we are parsing a signature block file
 
-                String key = uname.substring(0, uname.lastIndexOf("."));
+                String key = uname.substring(0, uname.lastIndexOf('.'));
 
                 if (signerCache == null)
                     signerCache = new ArrayList<>();
--- a/jdk/src/share/classes/java/util/logging/LogManager.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/util/logging/LogManager.java	Wed Jul 05 19:43:34 2017 +0200
@@ -779,7 +779,7 @@
 
             int ix = 1;
             for (;;) {
-                int ix2 = name.indexOf(".", ix);
+                int ix2 = name.indexOf('.', ix);
                 if (ix2 < 0) {
                     break;
                 }
@@ -802,7 +802,7 @@
             }
             LogNode node = root;
             while (name.length() > 0) {
-                int ix = name.indexOf(".");
+                int ix = name.indexOf('.');
                 String head;
                 if (ix > 0) {
                     head = name.substring(0, ix);
--- a/jdk/src/share/classes/java/util/logging/XMLFormatter.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/util/logging/XMLFormatter.java	Wed Jul 05 19:43:34 2017 +0200
@@ -174,7 +174,7 @@
         //  Check to see if the parameter was not a messagetext format
         //  or was not null or empty
         if (parameters != null && parameters.length != 0
-                && record.getMessage().indexOf("{") == -1 ) {
+                && record.getMessage().indexOf('{') == -1 ) {
             for (Object parameter : parameters) {
                 sb.append("  <param>");
                 try {
--- a/jdk/src/share/classes/java/util/zip/ZipInputStream.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/java/util/zip/ZipInputStream.java	Wed Jul 05 19:43:34 2017 +0200
@@ -319,7 +319,8 @@
         if (len > 0) {
             byte[] extra = new byte[len];
             readFully(extra, 0, len);
-            e.setExtra0(extra, true);
+            e.setExtra0(extra,
+                        e.csize == ZIP64_MAGICVAL || e.size == ZIP64_MAGICVAL);
         }
         return e;
     }
--- a/jdk/src/share/classes/javax/management/MBeanPermission.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/javax/management/MBeanPermission.java	Wed Jul 05 19:43:34 2017 +0200
@@ -290,7 +290,7 @@
 
         // Parse ObjectName
 
-        int openingBracket = name.indexOf("[");
+        int openingBracket = name.indexOf('[');
         if (openingBracket == -1) {
             // If "[on]" missing then ObjectName("*:*")
             //
@@ -329,7 +329,7 @@
 
         // Parse member
 
-        int poundSign = name.indexOf("#");
+        int poundSign = name.indexOf('#');
 
         if (poundSign == -1)
             setMember("*");
--- a/jdk/src/share/classes/javax/management/modelmbean/DescriptorSupport.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/javax/management/modelmbean/DescriptorSupport.java	Wed Jul 05 19:43:34 2017 +0200
@@ -329,7 +329,7 @@
                 inFld = false;
             } else if (inFld && inDesc) {
                 // want kw=value, eg, name="myname" value="myvalue"
-                int eq_separator = tok.indexOf("=");
+                int eq_separator = tok.indexOf('=');
                 if (eq_separator > 0) {
                     String kwPart = tok.substring(0,eq_separator);
                     String valPart = tok.substring(eq_separator+1);
@@ -458,7 +458,7 @@
             if ((fields[i] == null) || (fields[i].equals(""))) {
                 continue;
             }
-            int eq_separator = fields[i].indexOf("=");
+            int eq_separator = fields[i].indexOf('=');
             if (eq_separator < 0) {
                 // illegal if no = or is first character
                 if (MODELMBEAN_LOGGER.isLoggable(Level.FINEST)) {
--- a/jdk/src/share/classes/javax/management/modelmbean/RequiredModelMBean.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/javax/management/modelmbean/RequiredModelMBean.java	Wed Jul 05 19:43:34 2017 +0200
@@ -934,7 +934,7 @@
         String opMethodName;
 
         // Parse for class name and method
-        int opSplitter = opName.lastIndexOf(".");
+        int opSplitter = opName.lastIndexOf('.');
         if (opSplitter > 0) {
             opClassName = opName.substring(0,opSplitter);
             opMethodName = opName.substring(opSplitter+1);
@@ -943,7 +943,7 @@
 
         /* Ignore anything after a left paren.  We keep this for
            compatibility but it isn't specified.  */
-        opSplitter = opMethodName.indexOf("(");
+        opSplitter = opMethodName.indexOf('(');
         if (opSplitter > 0)
             opMethodName = opMethodName.substring(0,opSplitter);
 
--- a/jdk/src/share/classes/javax/security/auth/PrivateCredentialPermission.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/javax/security/auth/PrivateCredentialPermission.java	Wed Jul 05 19:43:34 2017 +0200
@@ -495,7 +495,7 @@
 
         // perform new initialization from the permission name
 
-        if (getName().indexOf(" ") == -1 && getName().indexOf("\"") == -1) {
+        if (getName().indexOf(' ') == -1 && getName().indexOf('"') == -1) {
 
             // name only has a credential class specified
             credentialClass = getName();
--- a/jdk/src/share/classes/javax/security/sasl/Sasl.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/javax/security/sasl/Sasl.java	Wed Jul 05 19:43:34 2017 +0200
@@ -600,7 +600,7 @@
                     // implementation of an algorithm. We are only interested
                     // in entries which lead to the implementation
                     // classes.
-                    if (currentKey.indexOf(" ") < 0) {
+                    if (currentKey.indexOf(' ') < 0) {
                         String className = providers[i].getProperty(currentKey);
                         if (!classes.contains(className)) {
                             classes.add(className);
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/ClassWriter.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/ClassWriter.java	Wed Jul 05 19:43:34 2017 +0200
@@ -785,11 +785,29 @@
         if (innerClasses == null) {
             innerClasses = new ByteVector();
         }
-        ++innerClassesCount;
-        innerClasses.putShort(name == null ? 0 : newClass(name));
-        innerClasses.putShort(outerName == null ? 0 : newClass(outerName));
-        innerClasses.putShort(innerName == null ? 0 : newUTF8(innerName));
-        innerClasses.putShort(access);
+        // Sec. 4.7.6 of the JVMS states "Every CONSTANT_Class_info entry in the
+        // constant_pool table which represents a class or interface C that is
+        // not a package member must have exactly one corresponding entry in the
+        // classes array". To avoid duplicates we keep track in the intVal field
+        // of the Item of each CONSTANT_Class_info entry C whether an inner
+        // class entry has already been added for C (this field is unused for
+        // class entries, and changing its value does not change the hashcode
+        // and equality tests). If so we store the index of this inner class
+        // entry (plus one) in intVal. This hack allows duplicate detection in
+        // O(1) time.
+        Item nameItem = newClassItem(name);
+        if (nameItem.intVal == 0) {
+            ++innerClassesCount;
+            innerClasses.putShort(nameItem.index);
+            innerClasses.putShort(outerName == null ? 0 : newClass(outerName));
+            innerClasses.putShort(innerName == null ? 0 : newUTF8(innerName));
+            innerClasses.putShort(access);
+            nameItem.intVal = innerClassesCount;
+        } else {
+            // Compare the inner classes entry nameItem.intVal - 1 with the
+            // arguments of this method and throw an exception if there is a
+            // difference?
+        }
     }
 
     @Override
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/Frame.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/Frame.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1455,16 +1455,20 @@
                             | cw.getMergedType(t & BASE_VALUE, u & BASE_VALUE);
                 } else {
                     // if u and t are array types, but not with the same element
-                    // type, merge(u,t)=java/lang/Object
-                    v = OBJECT | cw.addType("java/lang/Object");
+                    // type, merge(u,t) = dim(u) - 1 | java/lang/Object
+                    int vdim = ELEMENT_OF + (u & DIM);
+                    v = vdim | OBJECT | cw.addType("java/lang/Object");
                 }
             } else if ((t & BASE_KIND) == OBJECT || (t & DIM) != 0) {
                 // if t is any other reference or array type, the merged type
-                // is Object, or min(dim(u), dim(t)) | java/lang/Object is u
-                // and t have different array dimensions
-                int tdim = t & DIM;
-                int udim = u & DIM;
-                v = (udim != tdim ? Math.min(tdim, udim) : 0) | OBJECT
+                // is min(udim, tdim) | java/lang/Object, where udim is the
+                // array dimension of u, minus 1 if u is an array type with a
+                // primitive element type (and similarly for tdim).
+                int tdim = (((t & DIM) == 0 || (t & BASE_KIND) == OBJECT) ? 0
+                        : ELEMENT_OF) + (t & DIM);
+                int udim = (((u & DIM) == 0 || (u & BASE_KIND) == OBJECT) ? 0
+                        : ELEMENT_OF) + (u & DIM);
+                v = Math.min(tdim, udim) | OBJECT
                         | cw.addType("java/lang/Object");
             } else {
                 // if t is any other type, merge(u,t)=TOP
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/Item.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/Item.java	Wed Jul 05 19:43:34 2017 +0200
@@ -230,6 +230,7 @@
      * @param strVal3
      *            third part of the value of this item.
      */
+    @SuppressWarnings("fallthrough")
     void set(final int type, final String strVal1, final String strVal2,
             final String strVal3) {
         this.type = type;
@@ -237,9 +238,10 @@
         this.strVal2 = strVal2;
         this.strVal3 = strVal3;
         switch (type) {
+        case ClassWriter.CLASS:
+            this.intVal = 0;     // intVal of a class must be zero, see visitInnerClass
         case ClassWriter.UTF8:
         case ClassWriter.STR:
-        case ClassWriter.CLASS:
         case ClassWriter.MTYPE:
         case ClassWriter.TYPE_NORMAL:
             hashCode = 0x7FFFFFFF & (type + strVal1.hashCode());
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/Label.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/Label.java	Wed Jul 05 19:43:34 2017 +0200
@@ -502,7 +502,7 @@
     void addToSubroutine(final long id, final int nbSubroutines) {
         if ((status & VISITED) == 0) {
             status |= VISITED;
-            srcAndRefPositions = new int[(nbSubroutines - 1) / 32 + 1];
+            srcAndRefPositions = new int[nbSubroutines / 32 + 1];
         }
         srcAndRefPositions[(int) (id >>> 32)] |= (int) id;
     }
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/MethodWriter.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/MethodWriter.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1430,6 +1430,14 @@
 
     @Override
     public void visitMaxs(final int maxStack, final int maxLocals) {
+        if (resize) {
+            // replaces the temporary jump opcodes introduced by Label.resolve.
+            if (ClassReader.RESIZE) {
+                resizeInstructions();
+            } else {
+                throw new RuntimeException("Method code too large!");
+            }
+        }
         if (ClassReader.FRAMES && compute == FRAMES) {
             // completes the control flow graph with exception handler blocks
             Handler handler = firstHandler;
@@ -1987,43 +1995,43 @@
                     stackMap.putByte(v);
                 }
             } else {
-                StringBuffer buf = new StringBuffer();
+                StringBuilder sb = new StringBuilder();
                 d >>= 28;
                 while (d-- > 0) {
-                    buf.append('[');
+                    sb.append('[');
                 }
                 if ((t & Frame.BASE_KIND) == Frame.OBJECT) {
-                    buf.append('L');
-                    buf.append(cw.typeTable[t & Frame.BASE_VALUE].strVal1);
-                    buf.append(';');
+                    sb.append('L');
+                    sb.append(cw.typeTable[t & Frame.BASE_VALUE].strVal1);
+                    sb.append(';');
                 } else {
                     switch (t & 0xF) {
                     case 1:
-                        buf.append('I');
+                        sb.append('I');
                         break;
                     case 2:
-                        buf.append('F');
+                        sb.append('F');
                         break;
                     case 3:
-                        buf.append('D');
+                        sb.append('D');
                         break;
                     case 9:
-                        buf.append('Z');
+                        sb.append('Z');
                         break;
                     case 10:
-                        buf.append('B');
+                        sb.append('B');
                         break;
                     case 11:
-                        buf.append('C');
+                        sb.append('C');
                         break;
                     case 12:
-                        buf.append('S');
+                        sb.append('S');
                         break;
                     default:
-                        buf.append('J');
+                        sb.append('J');
                     }
                 }
-                stackMap.putByte(7).putShort(cw.newClass(buf.toString()));
+                stackMap.putByte(7).putShort(cw.newClass(sb.toString()));
             }
         }
     }
@@ -2051,14 +2059,6 @@
         if (classReaderOffset != 0) {
             return 6 + classReaderLength;
         }
-        if (resize) {
-            // replaces the temporary jump opcodes introduced by Label.resolve.
-            if (ClassReader.RESIZE) {
-                resizeInstructions();
-            } else {
-                throw new RuntimeException("Method code too large!");
-            }
-        }
         int size = 8;
         if (code.length > 0) {
             if (code.length > 65536) {
@@ -2715,49 +2715,50 @@
             }
         }
 
-        // recomputes the stack map frames
-        if (frameCount > 0) {
-            if (compute == FRAMES) {
-                frameCount = 0;
-                stackMap = null;
-                previousFrame = null;
-                frame = null;
-                Frame f = new Frame();
-                f.owner = labels;
-                Type[] args = Type.getArgumentTypes(descriptor);
-                f.initInputFrame(cw, access, args, maxLocals);
-                visitFrame(f);
-                Label l = labels;
-                while (l != null) {
-                    /*
-                     * here we need the original label position. getNewOffset
-                     * must therefore never have been called for this label.
-                     */
-                    u = l.position - 3;
-                    if ((l.status & Label.STORE) != 0 || (u >= 0 && resize[u])) {
-                        getNewOffset(allIndexes, allSizes, l);
-                        // TODO update offsets in UNINITIALIZED values
-                        visitFrame(l.frame);
-                    }
-                    l = l.successor;
+        // updates the stack map frame labels
+        if (compute == FRAMES) {
+            Label l = labels;
+            while (l != null) {
+                /*
+                 * Detects the labels that are just after an IF instruction that
+                 * has been resized with the IFNOT GOTO_W pattern. These labels
+                 * are now the target of a jump instruction (the IFNOT
+                 * instruction). Note that we need the original label position
+                 * here. getNewOffset must therefore never have been called for
+                 * this label.
+                 */
+                u = l.position - 3;
+                if (u >= 0 && resize[u]) {
+                    l.status |= Label.TARGET;
                 }
-            } else {
-                /*
-                 * Resizing an existing stack map frame table is really hard.
-                 * Not only the table must be parsed to update the offets, but
-                 * new frames may be needed for jump instructions that were
-                 * inserted by this method. And updating the offsets or
-                 * inserting frames can change the format of the following
-                 * frames, in case of packed frames. In practice the whole table
-                 * must be recomputed. For this the frames are marked as
-                 * potentially invalid. This will cause the whole class to be
-                 * reread and rewritten with the COMPUTE_FRAMES option (see the
-                 * ClassWriter.toByteArray method). This is not very efficient
-                 * but is much easier and requires much less code than any other
-                 * method I can think of.
-                 */
-                cw.invalidFrames = true;
+                getNewOffset(allIndexes, allSizes, l);
+                l = l.successor;
+            }
+            // Update the offsets in the uninitialized types
+            for (i = 0; i < cw.typeTable.length; ++i) {
+                Item item = cw.typeTable[i];
+                if (item != null && item.type == ClassWriter.TYPE_UNINIT) {
+                    item.intVal = getNewOffset(allIndexes, allSizes, 0,
+                            item.intVal);
+                }
             }
+            // The stack map frames are not serialized yet, so we don't need
+            // to update them. They will be serialized in visitMaxs.
+        } else if (frameCount > 0) {
+            /*
+             * Resizing an existing stack map frame table is really hard. Not
+             * only the table must be parsed to update the offets, but new
+             * frames may be needed for jump instructions that were inserted by
+             * this method. And updating the offsets or inserting frames can
+             * change the format of the following frames, in case of packed
+             * frames. In practice the whole table must be recomputed. For this
+             * the frames are marked as potentially invalid. This will cause the
+             * whole class to be reread and rewritten with the COMPUTE_FRAMES
+             * option (see the ClassWriter.toByteArray method). This is not very
+             * efficient but is much easier and requires much less code than any
+             * other method I can think of.
+             */
+            cw.invalidFrames = true;
         }
         // updates the exception handler block labels
         Handler h = firstHandler;
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/Type.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/Type.java	Wed Jul 05 19:43:34 2017 +0200
@@ -585,11 +585,11 @@
         case DOUBLE:
             return "double";
         case ARRAY:
-            StringBuffer b = new StringBuffer(getElementType().getClassName());
+            StringBuilder sb = new StringBuilder(getElementType().getClassName());
             for (int i = getDimensions(); i > 0; --i) {
-                b.append("[]");
+                sb.append("[]");
             }
-            return b.toString();
+            return sb.toString();
         case OBJECT:
             return new String(buf, off, len).replace('/', '.');
         default:
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/commons/InstructionAdapter.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/commons/InstructionAdapter.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1089,7 +1089,7 @@
     @Deprecated
     public void invokestatic(final String owner, final String name,
             final String desc) {
-        if (api < Opcodes.ASM5) {
+        if (api >= Opcodes.ASM5) {
             invokestatic(owner, name, desc, false);
             return;
         }
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/commons/Method.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/commons/Method.java	Wed Jul 05 19:43:34 2017 +0200
@@ -205,7 +205,7 @@
         }
         String returnType = method.substring(0, space);
         String methodName = method.substring(space + 1, start - 1).trim();
-        StringBuffer sb = new StringBuffer();
+        StringBuilder sb = new StringBuilder();
         sb.append('(');
         int p;
         do {
@@ -229,7 +229,7 @@
             return type;
         }
 
-        StringBuffer sb = new StringBuffer();
+        StringBuilder sb = new StringBuilder();
         int index = 0;
         while ((index = type.indexOf("[]", index) + 1) > 0) {
             sb.append('[');
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/commons/Remapper.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/commons/Remapper.java	Wed Jul 05 19:43:34 2017 +0200
@@ -147,17 +147,17 @@
         }
 
         Type[] args = Type.getArgumentTypes(desc);
-        StringBuffer s = new StringBuffer("(");
+        StringBuilder sb = new StringBuilder("(");
         for (int i = 0; i < args.length; i++) {
-            s.append(mapDesc(args[i].getDescriptor()));
+            sb.append(mapDesc(args[i].getDescriptor()));
         }
         Type returnType = Type.getReturnType(desc);
         if (returnType == Type.VOID_TYPE) {
-            s.append(")V");
-            return s.toString();
+            sb.append(")V");
+            return sb.toString();
         }
-        s.append(')').append(mapDesc(returnType.getDescriptor()));
-        return s.toString();
+        sb.append(')').append(mapDesc(returnType.getDescriptor()));
+        return sb.toString();
     }
 
     public Object mapValue(Object value) {
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/commons/SerialVersionUIDAdder.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/commons/SerialVersionUIDAdder.java	Wed Jul 05 19:43:34 2017 +0200
@@ -239,7 +239,9 @@
         if (computeSVUID) {
             this.name = name;
             this.access = access;
-            this.interfaces = Arrays.copyOf(interfaces, interfaces.length);
+            this.interfaces = new String[interfaces.length];
+            System.arraycopy(interfaces, 0, this.interfaces, 0,
+                    interfaces.length);
         }
 
         super.visit(version, access, name, signature, superName, interfaces);
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/tree/MethodNode.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/tree/MethodNode.java	Wed Jul 05 19:43:34 2017 +0200
@@ -351,7 +351,7 @@
     }
 
     @Override
-    @SuppressWarnings("serial") // Anonymous class
+    @SuppressWarnings("serial")
     public AnnotationVisitor visitAnnotationDefault() {
         return new AnnotationNode(new ArrayList<Object>(0) {
             @Override
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/tree/analysis/AnalyzerException.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/tree/analysis/AnalyzerException.java	Wed Jul 05 19:43:34 2017 +0200
@@ -66,7 +66,7 @@
  * @author Bing Ran
  * @author Eric Bruneton
  */
-@SuppressWarnings("serial") // implementation class
+@SuppressWarnings("serial")
 public class AnalyzerException extends Exception {
 
     public final AbstractInsnNode node;
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/tree/analysis/Frame.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/tree/analysis/Frame.java	Wed Jul 05 19:43:34 2017 +0200
@@ -754,14 +754,14 @@
      */
     @Override
     public String toString() {
-        StringBuffer b = new StringBuffer();
+        StringBuilder sb = new StringBuilder();
         for (int i = 0; i < getLocals(); ++i) {
-            b.append(getLocal(i));
+            sb.append(getLocal(i));
         }
-        b.append(' ');
+        sb.append(' ');
         for (int i = 0; i < getStackSize(); ++i) {
-            b.append(getStack(i).toString());
+            sb.append(getStack(i).toString());
         }
-        return b.toString();
+        return sb.toString();
     }
 }
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/util/ASMifier.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/util/ASMifier.java	Wed Jul 05 19:43:34 2017 +0200
@@ -206,7 +206,6 @@
         }
         text.add("import java.util.*;\n");
         text.add("import jdk.internal.org.objectweb.asm.*;\n");
-        text.add("import jdk.internal.org.objectweb.asm.attrs.*;\n");
         text.add("public class " + simpleName + "Dump implements Opcodes {\n\n");
         text.add("public static byte[] dump () throws Exception {\n\n");
         text.add("ClassWriter cw = new ClassWriter(0);\n");
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/util/CheckClassAdapter.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/util/CheckClassAdapter.java	Wed Jul 05 19:43:34 2017 +0200
@@ -298,26 +298,26 @@
         for (int j = 0; j < method.instructions.size(); ++j) {
             method.instructions.get(j).accept(mv);
 
-            StringBuffer s = new StringBuffer();
+            StringBuilder sb = new StringBuilder();
             Frame<BasicValue> f = frames[j];
             if (f == null) {
-                s.append('?');
+                sb.append('?');
             } else {
                 for (int k = 0; k < f.getLocals(); ++k) {
-                    s.append(getShortName(f.getLocal(k).toString()))
+                    sb.append(getShortName(f.getLocal(k).toString()))
                             .append(' ');
                 }
-                s.append(" : ");
+                sb.append(" : ");
                 for (int k = 0; k < f.getStackSize(); ++k) {
-                    s.append(getShortName(f.getStack(k).toString()))
+                    sb.append(getShortName(f.getStack(k).toString()))
                             .append(' ');
                 }
             }
-            while (s.length() < method.maxStack + method.maxLocals + 1) {
-                s.append(' ');
+            while (sb.length() < method.maxStack + method.maxLocals + 1) {
+                sb.append(' ');
             }
             pw.print(Integer.toString(j + 100000).substring(1));
-            pw.print(" " + s + " : " + t.text.get(t.text.size() - 1));
+            pw.print(" " + sb + " : " + t.text.get(t.text.size() - 1));
         }
         for (int j = 0; j < method.tryCatchBlocks.size(); ++j) {
             method.tryCatchBlocks.get(j).accept(mv);
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/util/Textifier.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/util/Textifier.java	Wed Jul 05 19:43:34 2017 +0200
@@ -443,7 +443,7 @@
         }
 
         buf.append(tab);
-        appendAccess(access);
+        appendAccess(access & ~Opcodes.ACC_VOLATILE);
         if ((access & Opcodes.ACC_NATIVE) != 0) {
             buf.append("native ");
         }
--- a/jdk/src/share/classes/jdk/internal/org/objectweb/asm/version.txt	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/internal/org/objectweb/asm/version.txt	Wed Jul 05 19:43:34 2017 +0200
@@ -1,12 +1,12 @@
 Path: .
-Working Copy Root Path: /hudson/jobs/objectweb-pull/workspace/asm-svn-2014-03-12
+Working Copy Root Path: /hudson/jobs/objectweb-pull/workspace/asm-svn-2014-05-27
 URL: file:///svnroot/asm/trunk/asm
 Repository Root: file:///svnroot/asm
 Repository UUID: 271bd773-ee82-43a6-9b2b-1890ed8ce7f9
-Revision: 1721
+Revision: 1748
 Node Kind: directory
 Schedule: normal
 Last Changed Author: ebruneton
-Last Changed Rev: 1721
-Last Changed Date: 2014-03-02 17:25:35 +0100 (Sun, 02 Mar 2014)
+Last Changed Rev: 1747
+Last Changed Date: 2014-05-24 10:22:13 +0200 (Sat, 24 May 2014)
 
--- a/jdk/src/share/classes/jdk/net/ExtendedSocketOptions.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/net/ExtendedSocketOptions.java	Wed Jul 05 19:43:34 2017 +0200
@@ -32,7 +32,7 @@
  * {@link java.net.StandardSocketOptions}. These options may be platform
  * specific.
  *
- * @since 1.9
+ * @since 1.8
  */
 @jdk.Exported
 public final class ExtendedSocketOptions {
--- a/jdk/src/share/classes/jdk/net/NetworkPermission.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/net/NetworkPermission.java	Wed Jul 05 19:43:34 2017 +0200
@@ -58,7 +58,7 @@
  *
  * @see jdk.net.ExtendedSocketOptions
  *
- * @since 1.9
+ * @since 1.8
  */
 
 @jdk.Exported
--- a/jdk/src/share/classes/jdk/net/SocketFlow.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/net/SocketFlow.java	Wed Jul 05 19:43:34 2017 +0200
@@ -43,7 +43,7 @@
  * When a security manager is installed, a {@link NetworkPermission}
  * is required to set or get this option.
  *
- * @since 1.9
+ * @since 1.8
  */
 @jdk.Exported
 public class SocketFlow {
@@ -66,7 +66,7 @@
      * one of these statuses, which reflect the state of socket's
      * flow.
      *
-     * @since 1.9
+     * @since 1.8
      */
     @jdk.Exported
     public enum Status {
--- a/jdk/src/share/classes/jdk/net/Sockets.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/net/Sockets.java	Wed Jul 05 19:43:34 2017 +0200
@@ -51,7 +51,7 @@
  * When a security manager is installed, some non-standard socket options
  * may require a security permission before being set or get.
  * The details are specified in {@link ExtendedSocketOptions}. No permission
- * is required for {@link java.net.StandardSocketOption}s.
+ * is required for {@link java.net.StandardSocketOptions}.
  *
  * @see java.nio.channels.NetworkChannel
  */
--- a/jdk/src/share/classes/jdk/net/package-info.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/jdk/net/package-info.java	Wed Jul 05 19:43:34 2017 +0200
@@ -27,7 +27,7 @@
  * Platform specific socket options for the {@code java.net} and {@code java.nio.channels}
  * socket classes.
  *
- * @since 1.9
+ * @since 1.8
  */
 
 @jdk.Exported
--- a/jdk/src/share/classes/sun/jvmstat/monitor/AbstractMonitor.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/jvmstat/monitor/AbstractMonitor.java	Wed Jul 05 19:43:34 2017 +0200
@@ -84,7 +84,7 @@
      * {@inheritDoc}
      */
     public String getBaseName() {
-        int baseIndex = name.lastIndexOf(".")+1;
+        int baseIndex = name.lastIndexOf('.') + 1;
         return name.substring(baseIndex);
     }
 
--- a/jdk/src/share/classes/sun/jvmstat/monitor/HostIdentifier.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/jvmstat/monitor/HostIdentifier.java	Wed Jul 05 19:43:34 2017 +0200
@@ -138,8 +138,8 @@
                 String frag = u.getFragment();
                 URI u2 = null;
 
-                int c1index = uriString.indexOf(":");
-                int c2index = uriString.lastIndexOf(":");
+                int c1index = uriString.indexOf(':');
+                int c2index = uriString.lastIndexOf(':');
                 if (c2index != c1index) {
                     /*
                      * this is the scheme:hostname:port case. Attempt to
--- a/jdk/src/share/classes/sun/management/StackTraceElementCompositeData.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/management/StackTraceElementCompositeData.java	Wed Jul 05 19:43:34 2017 +0200
@@ -68,7 +68,7 @@
             ste.getMethodName(),
             ste.getFileName(),
             new Integer(ste.getLineNumber()),
-            new Boolean(ste.isNativeMethod()),
+            ste.isNativeMethod(),
         };
         try {
             return new CompositeDataSupport(stackTraceElementCompositeType,
--- a/jdk/src/share/classes/sun/management/ThreadInfoCompositeData.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/management/ThreadInfoCompositeData.java	Wed Jul 05 19:43:34 2017 +0200
@@ -120,8 +120,8 @@
             new Long(threadInfo.getLockOwnerId()),
             threadInfo.getLockOwnerName(),
             stackTraceData,
-            new Boolean(threadInfo.isSuspended()),
-            new Boolean(threadInfo.isInNative()),
+                threadInfo.isSuspended(),
+                threadInfo.isInNative(),
             lockedMonitorsData,
             lockedSyncsData,
         };
--- a/jdk/src/share/classes/sun/management/VMOptionCompositeData.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/management/VMOptionCompositeData.java	Wed Jul 05 19:43:34 2017 +0200
@@ -59,7 +59,7 @@
         final Object[] vmOptionItemValues = {
             option.getName(),
             option.getValue(),
-            new Boolean(option.isWriteable()),
+            option.isWriteable(),
             option.getOrigin().toString(),
         };
 
--- a/jdk/src/share/classes/sun/management/snmp/jvminstr/NotificationTargetImpl.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/management/snmp/jvminstr/NotificationTargetImpl.java	Wed Jul 05 19:43:34 2017 +0200
@@ -70,8 +70,8 @@
 
         String addrStr;
         if (target.startsWith("[")) {
-            final int index = target.indexOf("]");
-            final int index2 = target.lastIndexOf(":");
+            final int index = target.indexOf(']');
+            final int index2 = target.lastIndexOf(':');
             if(index == -1)
                 throw new IllegalArgumentException("Host starts with [ but " +
                                                    "does not end with ]");
@@ -85,8 +85,8 @@
             if (addrStr.startsWith("["))
                 throw new IllegalArgumentException("More than one [[...]]");
         } else {
-            final int index = target.indexOf(":");
-            final int index2 = target.lastIndexOf(":");
+            final int index = target.indexOf(':');
+            final int index2 = target.lastIndexOf(':');
             if(index == -1) throw new
                 IllegalArgumentException("Missing port separator \":\"");
             addrStr = target.substring(0, index);
@@ -98,7 +98,7 @@
         address = InetAddress.getByName(addrStr);
 
         //THE CHECK SHOULD BE STRONGER!!!
-        final int index = target.lastIndexOf(":");
+        final int index = target.lastIndexOf(':');
 
         community = target.substring(index + 1, target.length());
 
--- a/jdk/src/share/classes/sun/misc/ExtensionInfo.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/misc/ExtensionInfo.java	Wed Jul 05 19:43:34 2017 +0200
@@ -273,8 +273,8 @@
         else
         {
             // Look for index of "." in the string
-            int sIdx = source.indexOf(".");
-            int tIdx = target.indexOf(".");
+            int sIdx = source.indexOf('.');
+            int tIdx = target.indexOf('.');
 
             if (sIdx == -1)
                 sIdx = source.length() - 1;
@@ -304,10 +304,10 @@
         String versionError = mf.format(args);
 
         // Look for "-" for pre-release
-        int prIndex = token.indexOf("-");
+        int prIndex = token.indexOf('-');
 
         // Look for "_" for patch release
-        int patchIndex = token.indexOf("_");
+        int patchIndex = token.indexOf('_');
 
         if (prIndex == -1 && patchIndex == -1)
         {
--- a/jdk/src/share/classes/sun/misc/JarIndex.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/misc/JarIndex.java	Wed Jul 05 19:43:34 2017 +0200
@@ -172,7 +172,7 @@
         if ((jarFiles = indexMap.get(fileName)) == null) {
             /* try the package name again */
             int pos;
-            if((pos = fileName.lastIndexOf("/")) != -1) {
+            if((pos = fileName.lastIndexOf('/')) != -1) {
                 jarFiles = indexMap.get(fileName.substring(0, pos));
             }
         }
@@ -195,7 +195,7 @@
     public void add(String fileName, String jarName) {
         String packageName;
         int pos;
-        if((pos = fileName.lastIndexOf("/")) != -1) {
+        if((pos = fileName.lastIndexOf('/')) != -1) {
             packageName = fileName.substring(0, pos);
         } else {
             packageName = fileName;
--- a/jdk/src/share/classes/sun/misc/URLClassPath.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/misc/URLClassPath.java	Wed Jul 05 19:43:34 2017 +0200
@@ -793,7 +793,7 @@
         boolean validIndex(final String name) {
             String packageName = name;
             int pos;
-            if((pos = name.lastIndexOf("/")) != -1) {
+            if((pos = name.lastIndexOf('/')) != -1) {
                 packageName = name.substring(0, pos);
             }
 
@@ -803,7 +803,7 @@
             while (enum_.hasMoreElements()) {
                 entry = enum_.nextElement();
                 entryName = entry.getName();
-                if((pos = entryName.lastIndexOf("/")) != -1)
+                if((pos = entryName.lastIndexOf('/')) != -1)
                     entryName = entryName.substring(0, pos);
                 if (entryName.equals(packageName)) {
                     return true;
@@ -900,7 +900,7 @@
                              */
                             JarIndex newIndex = newLoader.getIndex();
                             if(newIndex != null) {
-                                int pos = jarName.lastIndexOf("/");
+                                int pos = jarName.lastIndexOf('/');
                                 newIndex.merge(this.index, (pos == -1 ?
                                     null : jarName.substring(0, pos + 1)));
                             }
--- a/jdk/src/share/classes/sun/net/ftp/impl/FtpClient.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/net/ftp/impl/FtpClient.java	Wed Jul 05 19:43:34 2017 +0200
@@ -258,7 +258,7 @@
                     d = null;
                 }
                 if (d != null && time != null) {
-                    int c = time.indexOf(":");
+                    int c = time.indexOf(':');
                     now.setTime(d);
                     now.set(Calendar.HOUR, Integer.parseInt(time.substring(0, c)));
                     now.set(Calendar.MINUTE, Integer.parseInt(time.substring(c + 1)));
@@ -294,7 +294,7 @@
 
         public FtpDirEntry parseLine(String line) {
             String name = null;
-            int i = line.lastIndexOf(";");
+            int i = line.lastIndexOf(';');
             if (i > 0) {
                 name = line.substring(i + 1).trim();
                 line = line.substring(0, i);
@@ -305,7 +305,7 @@
             FtpDirEntry file = new FtpDirEntry(name);
             while (!line.isEmpty()) {
                 String s;
-                i = line.indexOf(";");
+                i = line.indexOf(';');
                 if (i > 0) {
                     s = line.substring(0, i);
                     line = line.substring(i + 1);
@@ -313,7 +313,7 @@
                     s = line;
                     line = "";
                 }
-                i = s.indexOf("=");
+                i = s.indexOf('=');
                 if (i > 0) {
                     String fact = s.substring(0, i);
                     String value = s.substring(i + 1);
--- a/jdk/src/share/classes/sun/net/spi/nameservice/dns/DNSNameService.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/net/spi/nameservice/dns/DNSNameService.java	Wed Jul 05 19:43:34 2017 +0200
@@ -325,7 +325,7 @@
             while (i.hasNext()) {
                 String parentDomain = i.next();
                 int start = 0;
-                while ((start = parentDomain.indexOf(".")) != -1
+                while ((start = parentDomain.indexOf('.')) != -1
                        && start < parentDomain.length() -1) {
                     try {
                         results = resolve(ctx, host+"."+parentDomain, ids, 0);
--- a/jdk/src/share/classes/sun/net/util/IPAddressUtil.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/net/util/IPAddressUtil.java	Wed Jul 05 19:43:34 2017 +0200
@@ -132,7 +132,7 @@
         byte[] dst = new byte[INADDR16SZ];
 
         int srcb_length = srcb.length;
-        int pc = src.indexOf ("%");
+        int pc = src.indexOf ('%');
         if (pc == srcb_length -1) {
             return null;
         }
--- a/jdk/src/share/classes/sun/net/www/ParseUtil.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/net/www/ParseUtil.java	Wed Jul 05 19:43:34 2017 +0200
@@ -356,8 +356,8 @@
              * because we must not quote a literal IPv6 address
              */
             if (opaquePart.startsWith("//[")) {
-                int end =  opaquePart.indexOf("]");
-                if (end != -1 && opaquePart.indexOf(":")!=-1) {
+                int end =  opaquePart.indexOf(']');
+                if (end != -1 && opaquePart.indexOf(':')!=-1) {
                     String doquote, dontquote;
                     if (end == opaquePart.length()) {
                         dontquote = opaquePart;
@@ -408,8 +408,8 @@
         } else if (authority != null) {
             sb.append("//");
             if (authority.startsWith("[")) {
-                int end = authority.indexOf("]");
-                if (end != -1 && authority.indexOf(":")!=-1) {
+                int end = authority.indexOf(']');
+                if (end != -1 && authority.indexOf(':')!=-1) {
                     String doquote, dontquote;
                     if (end == authority.length()) {
                         dontquote = authority;
--- a/jdk/src/share/classes/sun/reflect/misc/ReflectUtil.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/reflect/misc/ReflectUtil.java	Wed Jul 05 19:43:34 2017 +0200
@@ -341,6 +341,6 @@
      * (not to be confused with a Java Language anonymous inner class).
      */
     public static boolean isVMAnonymousClass(Class<?> cls) {
-        return cls.getName().indexOf("/") > -1;
+        return cls.getName().indexOf('/') > -1;
     }
 }
--- a/jdk/src/share/classes/sun/rmi/runtime/Log.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/rmi/runtime/Log.java	Wed Jul 05 19:43:34 2017 +0200
@@ -426,7 +426,7 @@
          * Mimic old log messages that only contain unqualified names.
          */
         private static String unqualifiedName(String name) {
-            int lastDot = name.lastIndexOf(".");
+            int lastDot = name.lastIndexOf('.');
             if (lastDot >= 0) {
                 name = name.substring(lastDot + 1);
             }
--- a/jdk/src/share/classes/sun/rmi/transport/proxy/CGIHandler.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/rmi/transport/proxy/CGIHandler.java	Wed Jul 05 19:43:34 2017 +0200
@@ -141,7 +141,7 @@
     {
         try {
             String command, param;
-            int delim = QueryString.indexOf("=");
+            int delim = QueryString.indexOf('=');
             if (delim == -1) {
                 command = QueryString;
                 param = "";
--- a/jdk/src/share/classes/sun/security/jgss/GSSManagerImpl.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/security/jgss/GSSManagerImpl.java	Wed Jul 05 19:43:34 2017 +0200
@@ -50,8 +50,8 @@
                             if (osname.startsWith("SunOS") ||
                                 osname.contains("OS X") ||
                                 osname.startsWith("Linux")) {
-                                return new Boolean(System.getProperty
-                                    (USE_NATIVE_PROP));
+                                return Boolean.valueOf(System.getProperty
+                                        (USE_NATIVE_PROP));
                             }
                             return Boolean.FALSE;
                     }
--- a/jdk/src/share/classes/sun/security/jgss/wrapper/Krb5Util.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/security/jgss/wrapper/Krb5Util.java	Wed Jul 05 19:43:34 2017 +0200
@@ -39,7 +39,7 @@
     static String getTGSName(GSSNameElement name)
         throws GSSException {
         String krbPrinc = name.getKrbName();
-        int atIndex = krbPrinc.indexOf("@");
+        int atIndex = krbPrinc.indexOf('@');
         String realm = krbPrinc.substring(atIndex + 1);
         StringBuffer buf = new StringBuffer("krbtgt/");
         buf.append(realm).append('@').append(realm);
--- a/jdk/src/share/classes/sun/security/provider/PolicyFile.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/security/provider/PolicyFile.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1271,7 +1271,7 @@
         Boolean imp = AccessController.doPrivileged
             (new PrivilegedAction<Boolean>() {
             public Boolean run() {
-                return new Boolean(entry.getCodeSource().implies(cs));
+                return entry.getCodeSource().implies(cs);
             }
         });
         if (!imp.booleanValue()) {
@@ -1856,7 +1856,7 @@
             int colonIndex;
             String prefix = value;
             String suffix;
-            if ((colonIndex = value.indexOf(":")) != -1) {
+            if ((colonIndex = value.indexOf(':')) != -1) {
                 prefix = value.substring(0, colonIndex);
             }
 
--- a/jdk/src/share/classes/sun/security/ssl/SunX509KeyManagerImpl.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/security/ssl/SunX509KeyManagerImpl.java	Wed Jul 05 19:43:34 2017 +0200
@@ -338,7 +338,7 @@
         }
         String sigType;
         if (keyType.contains("_")) {
-            int k = keyType.indexOf("_");
+            int k = keyType.indexOf('_');
             sigType = keyType.substring(k + 1);
             keyType = keyType.substring(0, k);
         } else {
--- a/jdk/src/share/classes/sun/security/ssl/X509KeyManagerImpl.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/security/ssl/X509KeyManagerImpl.java	Wed Jul 05 19:43:34 2017 +0200
@@ -302,7 +302,7 @@
         final String sigKeyAlgorithm;
 
         KeyType(String algorithm) {
-            int k = algorithm.indexOf("_");
+            int k = algorithm.indexOf('_');
             if (k == -1) {
                 keyAlgorithm = algorithm;
                 sigKeyAlgorithm = null;
--- a/jdk/src/share/classes/sun/security/util/HostnameChecker.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/security/util/HostnameChecker.java	Wed Jul 05 19:43:34 2017 +0200
@@ -300,8 +300,8 @@
         template = template.toLowerCase(Locale.ENGLISH);
 
         // Retreive leftmost component
-        int templateIdx = template.indexOf(".");
-        int nameIdx = name.indexOf(".");
+        int templateIdx = template.indexOf('.');
+        int nameIdx = name.indexOf('.');
 
         if (templateIdx == -1)
             templateIdx = template.length();
@@ -326,7 +326,7 @@
      */
     private static boolean matchWildCards(String name, String template) {
 
-        int wildcardIdx = template.indexOf("*");
+        int wildcardIdx = template.indexOf('*');
         if (wildcardIdx == -1)
             return name.equals(template);
 
@@ -349,7 +349,7 @@
 
             // update the match scope
             name = name.substring(beforeStartIdx + beforeWildcard.length());
-            wildcardIdx = afterWildcard.indexOf("*");
+            wildcardIdx = afterWildcard.indexOf('*');
         }
         return name.endsWith(afterWildcard);
     }
--- a/jdk/src/share/classes/sun/security/util/SignatureFileVerifier.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/security/util/SignatureFileVerifier.java	Wed Jul 05 19:43:34 2017 +0200
@@ -98,7 +98,7 @@
         } finally {
             Providers.stopJarVerification(obj);
         }
-        this.name = name.substring(0, name.lastIndexOf("."))
+        this.name = name.substring(0, name.lastIndexOf('.'))
                                                    .toUpperCase(Locale.ENGLISH);
         this.md = md;
         this.signerCache = signerCache;
--- a/jdk/src/share/classes/sun/security/validator/PKIXValidator.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/security/validator/PKIXValidator.java	Wed Jul 05 19:43:34 2017 +0200
@@ -86,12 +86,12 @@
             factory = CertificateFactory.getInstance("X.509");
         } catch (InvalidAlgorithmParameterException e) {
             throw new RuntimeException("Unexpected error: " + e.toString(), e);
-            } catch (CertificateException e) {
-                throw new RuntimeException("Internal error", e);
-            }
+        } catch (CertificateException e) {
+            throw new RuntimeException("Internal error", e);
+        }
 
         setDefaultParameters(variant);
-            plugin = variant.equals(VAR_PLUGIN_CODE_SIGNING);
+        plugin = variant.equals(VAR_PLUGIN_CODE_SIGNING);
 
         trustedSubjects = setTrustedSubjects();
     }
@@ -107,13 +107,13 @@
         }
         parameterTemplate = params;
 
-            try {
-                factory = CertificateFactory.getInstance("X.509");
-            } catch (CertificateException e) {
-                throw new RuntimeException("Internal error", e);
-            }
+        try {
+            factory = CertificateFactory.getInstance("X.509");
+        } catch (CertificateException e) {
+            throw new RuntimeException("Internal error", e);
+        }
 
-            plugin = variant.equals(VAR_PLUGIN_CODE_SIGNING);
+        plugin = variant.equals(VAR_PLUGIN_CODE_SIGNING);
 
         trustedSubjects = setTrustedSubjects();
     }
@@ -133,10 +133,10 @@
             List<PublicKey> keys;
             if (subjectMap.containsKey(dn)) {
                 keys = subjectMap.get(dn);
-        } else {
+            } else {
                 keys = new ArrayList<PublicKey>();
                 subjectMap.put(dn, keys);
-        }
+            }
             keys.add(cert.getPublicKey());
         }
 
@@ -202,75 +202,74 @@
             pkixParameters.addCertPathChecker(algorithmChecker);
         }
 
-            // check that chain is in correct order and check if chain contains
-            // trust anchor
-            X500Principal prevIssuer = null;
-            for (int i = 0; i < chain.length; i++) {
-                X509Certificate cert = chain[i];
-                X500Principal dn = cert.getSubjectX500Principal();
-                if (i != 0 &&
-                    !dn.equals(prevIssuer)) {
-                    // chain is not ordered correctly, call builder instead
-                    return doBuild(chain, otherCerts, pkixParameters);
-                }
-
-                // Check if chain[i] is already trusted. It may be inside
-                // trustedCerts, or has the same dn and public key as a cert
-                // inside trustedCerts. The latter happens when a CA has
-                // updated its cert with a stronger signature algorithm in JRE
-                // but the weak one is still in circulation.
-
-                if (trustedCerts.contains(cert) ||          // trusted cert
-                        (trustedSubjects.containsKey(dn) && // replacing ...
-                         trustedSubjects.get(dn).contains(  // ... weak cert
-                            cert.getPublicKey()))) {
-                    if (i == 0) {
-                        return new X509Certificate[] {chain[0]};
-                    }
-                    // Remove and call validator on partial chain [0 .. i-1]
-                    X509Certificate[] newChain = new X509Certificate[i];
-                    System.arraycopy(chain, 0, newChain, 0, i);
-                    return doValidate(newChain, pkixParameters);
-                }
-                prevIssuer = cert.getIssuerX500Principal();
+        // check that chain is in correct order and check if chain contains
+        // trust anchor
+        X500Principal prevIssuer = null;
+        for (int i = 0; i < chain.length; i++) {
+            X509Certificate cert = chain[i];
+            X500Principal dn = cert.getSubjectX500Principal();
+            if (i != 0 && !dn.equals(prevIssuer)) {
+                // chain is not ordered correctly, call builder instead
+                return doBuild(chain, otherCerts, pkixParameters);
             }
 
-            // apparently issued by trust anchor?
-            X509Certificate last = chain[chain.length - 1];
-            X500Principal issuer = last.getIssuerX500Principal();
-            X500Principal subject = last.getSubjectX500Principal();
-            if (trustedSubjects.containsKey(issuer) &&
-                    isSignatureValid(trustedSubjects.get(issuer), last)) {
-                return doValidate(chain, pkixParameters);
+            // Check if chain[i] is already trusted. It may be inside
+            // trustedCerts, or has the same dn and public key as a cert
+            // inside trustedCerts. The latter happens when a CA has
+            // updated its cert with a stronger signature algorithm in JRE
+            // but the weak one is still in circulation.
+
+            if (trustedCerts.contains(cert) ||          // trusted cert
+                    (trustedSubjects.containsKey(dn) && // replacing ...
+                     trustedSubjects.get(dn).contains(  // ... weak cert
+                        cert.getPublicKey()))) {
+                if (i == 0) {
+                    return new X509Certificate[] {chain[0]};
+                }
+                // Remove and call validator on partial chain [0 .. i-1]
+                X509Certificate[] newChain = new X509Certificate[i];
+                System.arraycopy(chain, 0, newChain, 0, i);
+                return doValidate(newChain, pkixParameters);
             }
+            prevIssuer = cert.getIssuerX500Principal();
+        }
 
-            // don't fallback to builder if called from plugin/webstart
-            if (plugin) {
-                // Validate chain even if no trust anchor is found. This
-                // allows plugin/webstart to make sure the chain is
-                // otherwise valid
-                if (chain.length > 1) {
-                    X509Certificate[] newChain =
-                        new X509Certificate[chain.length-1];
-                    System.arraycopy(chain, 0, newChain, 0, newChain.length);
+        // apparently issued by trust anchor?
+        X509Certificate last = chain[chain.length - 1];
+        X500Principal issuer = last.getIssuerX500Principal();
+        X500Principal subject = last.getSubjectX500Principal();
+        if (trustedSubjects.containsKey(issuer) &&
+                isSignatureValid(trustedSubjects.get(issuer), last)) {
+            return doValidate(chain, pkixParameters);
+        }
 
-                    // temporarily set last cert as sole trust anchor
-                    try {
-                        pkixParameters.setTrustAnchors
-                            (Collections.singleton(new TrustAnchor
-                                (chain[chain.length-1], null)));
-                    } catch (InvalidAlgorithmParameterException iape) {
-                        // should never occur, but ...
-                        throw new CertificateException(iape);
-                    }
-                    doValidate(newChain, pkixParameters);
+        // don't fallback to builder if called from plugin/webstart
+        if (plugin) {
+            // Validate chain even if no trust anchor is found. This
+            // allows plugin/webstart to make sure the chain is
+            // otherwise valid
+            if (chain.length > 1) {
+                X509Certificate[] newChain =
+                    new X509Certificate[chain.length-1];
+                System.arraycopy(chain, 0, newChain, 0, newChain.length);
+
+                // temporarily set last cert as sole trust anchor
+                try {
+                    pkixParameters.setTrustAnchors
+                        (Collections.singleton(new TrustAnchor
+                            (chain[chain.length-1], null)));
+                } catch (InvalidAlgorithmParameterException iape) {
+                    // should never occur, but ...
+                    throw new CertificateException(iape);
                 }
-                // if the rest of the chain is valid, throw exception
-                // indicating no trust anchor was found
-                throw new ValidatorException
-                    (ValidatorException.T_NO_TRUST_ANCHOR);
+                doValidate(newChain, pkixParameters);
             }
-            // otherwise, fall back to builder
+            // if the rest of the chain is valid, throw exception
+            // indicating no trust anchor was found
+            throw new ValidatorException
+                (ValidatorException.T_NO_TRUST_ANCHOR);
+        }
+        // otherwise, fall back to builder
 
         return doBuild(chain, otherCerts, pkixParameters);
     }
--- a/jdk/src/share/classes/sun/security/x509/CRLExtensions.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/security/x509/CRLExtensions.java	Wed Jul 05 19:43:34 2017 +0200
@@ -185,7 +185,7 @@
         String name;
         String id = attr.getPrefix();
         if (id.equalsIgnoreCase(X509CertImpl.NAME)) { // fully qualified
-            int index = alias.lastIndexOf(".");
+            int index = alias.lastIndexOf('.');
             name = alias.substring(index + 1);
         } else
             name = alias;
--- a/jdk/src/share/classes/sun/tools/jconsole/ConnectDialog.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/tools/jconsole/ConnectDialog.java	Wed Jul 05 19:43:34 2017 +0200
@@ -325,7 +325,7 @@
                         } else {
                             String host = remoteTF.getText().trim();
                             String port = "0";
-                            int index = host.lastIndexOf(":");
+                            int index = host.lastIndexOf(':');
                             if (index >= 0) {
                                 port = host.substring(index + 1);
                                 host = host.substring(0, index);
--- a/jdk/src/share/classes/sun/tools/jconsole/inspector/Utils.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/tools/jconsole/inspector/Utils.java	Wed Jul 05 19:43:34 2017 +0200
@@ -210,7 +210,7 @@
     public static String getArrayClassName(String name) {
         String className = null;
         if (name.startsWith("[")) {
-            int index = name.lastIndexOf("[");
+            int index = name.lastIndexOf('[');
             className = name.substring(index, name.length());
             if (className.startsWith("[L")) {
                 className = className.substring(2, className.length() - 1);
@@ -241,7 +241,7 @@
         if (className == null) {
             return name;
         }
-        int index = name.lastIndexOf("[");
+        int index = name.lastIndexOf('[');
         StringBuilder brackets = new StringBuilder(className);
         for (int i = 0; i <= index; i++) {
             brackets.append("[]");
--- a/jdk/src/share/classes/sun/tools/jconsole/inspector/XOperations.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/tools/jconsole/inspector/XOperations.java	Wed Jul 05 19:43:34 2017 +0200
@@ -113,7 +113,7 @@
             if (methodLabel.getText().length() > 20) {
                 methodLabel.setText(methodLabel.getText().
                         substring(methodLabel.getText().
-                        lastIndexOf(".") + 1,
+                        lastIndexOf('.') + 1,
                         methodLabel.getText().length()));
             }
 
--- a/jdk/src/share/classes/sun/tools/jconsole/inspector/XTree.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/classes/sun/tools/jconsole/inspector/XTree.java	Wed Jul 05 19:43:34 2017 +0200
@@ -475,7 +475,7 @@
     private static Map<String, String> extractKeyValuePairs(
             String props, ObjectName mbean) {
         Map<String, String> map = new LinkedHashMap<String, String>();
-        int eq = props.indexOf("=");
+        int eq = props.indexOf('=');
         while (eq != -1) {
             String key = props.substring(0, eq);
             String value = mbean.getKeyProperty(key);
@@ -484,7 +484,7 @@
             if (props.startsWith(",")) {
                 props = props.substring(1);
             }
-            eq = props.indexOf("=");
+            eq = props.indexOf('=');
         }
         return map;
     }
@@ -821,7 +821,7 @@
         }
 
         private void buildKeyValue() {
-            int index = tokenValue.indexOf("=");
+            int index = tokenValue.indexOf('=');
             if (index < 0) {
                 key = tokenValue;
                 value = tokenValue;
--- a/jdk/src/share/lib/security/sunpkcs11-solaris.cfg	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/share/lib/security/sunpkcs11-solaris.cfg	Wed Jul 05 19:43:34 2017 +0200
@@ -18,18 +18,5 @@
 
 disabledMechanisms = {
   CKM_DSA_KEY_PAIR_GEN
-# the following mechanisms are disabled due to performance issues
-# (Solaris bug 6337157)
-  CKM_DSA_SHA1
-  CKM_MD5_RSA_PKCS
-  CKM_SHA1_RSA_PKCS
-  CKM_SHA256_RSA_PKCS
-  CKM_SHA384_RSA_PKCS
-  CKM_SHA512_RSA_PKCS
-# the following mechanisms are disabled to ensure backward compatibility
-# (Solaris bug 6545046)
-  CKM_DES_CBC_PAD
-  CKM_DES3_CBC_PAD
-  CKM_AES_CBC_PAD
 }
 
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/ChangeLog	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1208 +0,0 @@
-
-                ChangeLog file for zlib
-
-Changes in 1.2.5 (19 Apr 2010)
-- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev]
-- Default to libdir as sharedlibdir in configure [Nieder]
-- Update copyright dates on modified source files
-- Update trees.c to be able to generate modified trees.h
-- Exit configure for MinGW, suggesting win32/Makefile.gcc
-
-Changes in 1.2.4.5 (18 Apr 2010)
-- Set sharedlibdir in configure [Torok]
-- Set LDFLAGS in Makefile.in [Bar-Lev]
-- Avoid mkdir objs race condition in Makefile.in [Bowler]
-- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays
-- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C
-- Don't use hidden attribute when it is a warning generator (e.g. Solaris)
-
-Changes in 1.2.4.4 (18 Apr 2010)
-- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok]
-- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty
-- Try to use bash or ksh regardless of functionality of /bin/sh
-- Fix configure incompatibility with NetBSD sh
-- Remove attempt to run under bash or ksh since have better NetBSD fix
-- Fix win32/Makefile.gcc for MinGW [Bar-Lev]
-- Add diagnostic messages when using CROSS_PREFIX in configure
-- Added --sharedlibdir option to configure [Weigelt]
-- Use hidden visibility attribute when available [Frysinger]
-
-Changes in 1.2.4.3 (10 Apr 2010)
-- Only use CROSS_PREFIX in configure for ar and ranlib if they exist
-- Use CROSS_PREFIX for nm [Bar-Lev]
-- Assume _LARGEFILE64_SOURCE defined is equivalent to true
-- Avoid use of undefined symbols in #if with && and ||
-- Make *64 prototypes in gzguts.h consistent with functions
-- Add -shared load option for MinGW in configure [Bowler]
-- Move z_off64_t to public interface, use instead of off64_t
-- Remove ! from shell test in configure (not portable to Solaris)
-- Change +0 macro tests to -0 for possibly increased portability
-
-Changes in 1.2.4.2 (9 Apr 2010)
-- Add consistent carriage returns to readme.txt's in masmx86 and masmx64
-- Really provide prototypes for *64 functions when building without LFS
-- Only define unlink() in minigzip.c if unistd.h not included
-- Update README to point to contrib/vstudio project files
-- Move projects/vc6 to old/ and remove projects/
-- Include stdlib.h in minigzip.c for setmode() definition under WinCE
-- Clean up assembler builds in win32/Makefile.msc [Rowe]
-- Include sys/types.h for Microsoft for off_t definition
-- Fix memory leak on error in gz_open()
-- Symbolize nm as $NM in configure [Weigelt]
-- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt]
-- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined
-- Fix bug in gzeof() to take into account unused input data
-- Avoid initialization of structures with variables in puff.c
-- Updated win32/README-WIN32.txt [Rowe]
-
-Changes in 1.2.4.1 (28 Mar 2010)
-- Remove the use of [a-z] constructs for sed in configure [gentoo 310225]
-- Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech]
-- Restore "for debugging" comment on sprintf() in gzlib.c
-- Remove fdopen for MVS from gzguts.h
-- Put new README-WIN32.txt in win32 [Rowe]
-- Add check for shell to configure and invoke another shell if needed
-- Fix big fat stinking bug in gzseek() on uncompressed files
-- Remove vestigial F_OPEN64 define in zutil.h
-- Set and check the value of _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE
-- Avoid errors on non-LFS systems when applications define LFS macros
-- Set EXE to ".exe" in configure for MINGW [Kahle]
-- Match crc32() in crc32.c exactly to the prototype in zlib.h [Sherrill]
-- Add prefix for cross-compilation in win32/makefile.gcc [Bar-Lev]
-- Add DLL install in win32/makefile.gcc [Bar-Lev]
-- Allow Linux* or linux* from uname in configure [Bar-Lev]
-- Allow ldconfig to be redefined in configure and Makefile.in [Bar-Lev]
-- Add cross-compilation prefixes to configure [Bar-Lev]
-- Match type exactly in gz_load() invocation in gzread.c
-- Match type exactly of zcalloc() in zutil.c to zlib.h alloc_func
-- Provide prototypes for *64 functions when building zlib without LFS
-- Don't use -lc when linking shared library on MinGW
-- Remove errno.h check in configure and vestigial errno code in zutil.h
-
-Changes in 1.2.4 (14 Mar 2010)
-- Fix VER3 extraction in configure for no fourth subversion
-- Update zlib.3, add docs to Makefile.in to make .pdf out of it
-- Add zlib.3.pdf to distribution
-- Don't set error code in gzerror() if passed pointer is NULL
-- Apply destination directory fixes to CMakeLists.txt [Lowman]
-- Move #cmakedefine's to a new zconf.in.cmakein
-- Restore zconf.h for builds that don't use configure or cmake
-- Add distclean to dummy Makefile for convenience
-- Update and improve INDEX, README, and FAQ
-- Update CMakeLists.txt for the return of zconf.h [Lowman]
-- Update contrib/vstudio/vc9 and vc10 [Vollant]
-- Change libz.dll.a back to libzdll.a in win32/Makefile.gcc
-- Apply license and readme changes to contrib/asm686 [Raiter]
-- Check file name lengths and add -c option in minigzip.c [Li]
-- Update contrib/amd64 and contrib/masmx86/ [Vollant]
-- Avoid use of "eof" parameter in trees.c to not shadow library variable
-- Update make_vms.com for removal of zlibdefs.h [Zinser]
-- Update assembler code and vstudio projects in contrib [Vollant]
-- Remove outdated assembler code contrib/masm686 and contrib/asm586
-- Remove old vc7 and vc8 from contrib/vstudio
-- Update win32/Makefile.msc, add ZLIB_VER_SUBREVISION [Rowe]
-- Fix memory leaks in gzclose_r() and gzclose_w(), file leak in gz_open()
-- Add contrib/gcc_gvmat64 for longest_match and inflate_fast [Vollant]
-- Remove *64 functions from win32/zlib.def (they're not 64-bit yet)
-- Fix bug in void-returning vsprintf() case in gzwrite.c
-- Fix name change from inflate.h in contrib/inflate86/inffas86.c
-- Check if temporary file exists before removing in make_vms.com [Zinser]
-- Fix make install and uninstall for --static option
-- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta]
-- Update readme.txt in contrib/masmx64 and masmx86 to assemble
-
-Changes in 1.2.3.9 (21 Feb 2010)
-- Expunge gzio.c
-- Move as400 build information to old
-- Fix updates in contrib/minizip and contrib/vstudio
-- Add const to vsnprintf test in configure to avoid warnings [Weigelt]
-- Delete zconf.h (made by configure) [Weigelt]
-- Change zconf.in.h to zconf.h.in per convention [Weigelt]
-- Check for NULL buf in gzgets()
-- Return empty string for gzgets() with len == 1 (like fgets())
-- Fix description of gzgets() in zlib.h for end-of-file, NULL return
-- Update minizip to 1.1 [Vollant]
-- Avoid MSVC loss of data warnings in gzread.c, gzwrite.c
-- Note in zlib.h that gzerror() should be used to distinguish from EOF
-- Remove use of snprintf() from gzlib.c
-- Fix bug in gzseek()
-- Update contrib/vstudio, adding vc9 and vc10 [Kuno, Vollant]
-- Fix zconf.h generation in CMakeLists.txt [Lowman]
-- Improve comments in zconf.h where modified by configure
-
-Changes in 1.2.3.8 (13 Feb 2010)
-- Clean up text files (tabs, trailing whitespace, etc.) [Oberhumer]
-- Use z_off64_t in gz_zero() and gz_skip() to match state->skip
-- Avoid comparison problem when sizeof(int) == sizeof(z_off64_t)
-- Revert to Makefile.in from 1.2.3.6 (live with the clutter)
-- Fix missing error return in gzflush(), add zlib.h note
-- Add *64 functions to zlib.map [Levin]
-- Fix signed/unsigned comparison in gz_comp()
-- Use SFLAGS when testing shared linking in configure
-- Add --64 option to ./configure to use -m64 with gcc
-- Fix ./configure --help to correctly name options
-- Have make fail if a test fails [Levin]
-- Avoid buffer overrun in contrib/masmx64/gvmat64.asm [Simpson]
-- Remove assembler object files from contrib
-
-Changes in 1.2.3.7 (24 Jan 2010)
-- Always gzopen() with O_LARGEFILE if available
-- Fix gzdirect() to work immediately after gzopen() or gzdopen()
-- Make gzdirect() more precise when the state changes while reading
-- Improve zlib.h documentation in many places
-- Catch memory allocation failure in gz_open()
-- Complete close operation if seek forward in gzclose_w() fails
-- Return Z_ERRNO from gzclose_r() if close() fails
-- Return Z_STREAM_ERROR instead of EOF for gzclose() being passed NULL
-- Return zero for gzwrite() errors to match zlib.h description
-- Return -1 on gzputs() error to match zlib.h description
-- Add zconf.in.h to allow recovery from configure modification [Weigelt]
-- Fix static library permissions in Makefile.in [Weigelt]
-- Avoid warnings in configure tests that hide functionality [Weigelt]
-- Add *BSD and DragonFly to Linux case in configure [gentoo 123571]
-- Change libzdll.a to libz.dll.a in win32/Makefile.gcc [gentoo 288212]
-- Avoid access of uninitialized data for first inflateReset2 call [Gomes]
-- Keep object files in subdirectories to reduce the clutter somewhat
-- Remove default Makefile and zlibdefs.h, add dummy Makefile
-- Add new external functions to Z_PREFIX, remove duplicates, z_z_ -> z_
-- Remove zlibdefs.h completely -- modify zconf.h instead
-
-Changes in 1.2.3.6 (17 Jan 2010)
-- Avoid void * arithmetic in gzread.c and gzwrite.c
-- Make compilers happier with const char * for gz_error message
-- Avoid unused parameter warning in inflate.c
-- Avoid signed-unsigned comparison warning in inflate.c
-- Indent #pragma's for traditional C
-- Fix usage of strwinerror() in glib.c, change to gz_strwinerror()
-- Correct email address in configure for system options
-- Update make_vms.com and add make_vms.com to contrib/minizip [Zinser]
-- Update zlib.map [Brown]
-- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok]
-- Apply various fixes to CMakeLists.txt [Lowman]
-- Add checks on len in gzread() and gzwrite()
-- Add error message for no more room for gzungetc()
-- Remove zlib version check in gzwrite()
-- Defer compression of gzprintf() result until need to
-- Use snprintf() in gzdopen() if available
-- Remove USE_MMAP configuration determination (only used by minigzip)
-- Remove examples/pigz.c (available separately)
-- Update examples/gun.c to 1.6
-
-Changes in 1.2.3.5 (8 Jan 2010)
-- Add space after #if in zutil.h for some compilers
-- Fix relatively harmless bug in deflate_fast() [Exarevsky]
-- Fix same problem in deflate_slow()
-- Add $(SHAREDLIBV) to LIBS in Makefile.in [Brown]
-- Add deflate_rle() for faster Z_RLE strategy run-length encoding
-- Add deflate_huff() for faster Z_HUFFMAN_ONLY encoding
-- Change name of "write" variable in inffast.c to avoid library collisions
-- Fix premature EOF from gzread() in gzio.c [Brown]
-- Use zlib header window size if windowBits is 0 in inflateInit2()
-- Remove compressBound() call in deflate.c to avoid linking compress.o
-- Replace use of errno in gz* with functions, support WinCE [Alves]
-- Provide alternative to perror() in minigzip.c for WinCE [Alves]
-- Don't use _vsnprintf on later versions of MSVC [Lowman]
-- Add CMake build script and input file [Lowman]
-- Update contrib/minizip to 1.1 [Svensson, Vollant]
-- Moved nintendods directory from contrib to .
-- Replace gzio.c with a new set of routines with the same functionality
-- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above
-- Update contrib/minizip to 1.1b
-- Change gzeof() to return 0 on error instead of -1 to agree with zlib.h
-
-Changes in 1.2.3.4 (21 Dec 2009)
-- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility
-- Update comments in configure and Makefile.in for default --shared
-- Fix test -z's in configure [Marquess]
-- Build examplesh and minigzipsh when not testing
-- Change NULL's to Z_NULL's in deflate.c and in comments in zlib.h
-- Import LDFLAGS from the environment in configure
-- Fix configure to populate SFLAGS with discovered CFLAGS options
-- Adapt make_vms.com to the new Makefile.in [Zinser]
-- Add zlib2ansi script for C++ compilation [Marquess]
-- Add _FILE_OFFSET_BITS=64 test to make test (when applicable)
-- Add AMD64 assembler code for longest match to contrib [Teterin]
-- Include options from $SFLAGS when doing $LDSHARED
-- Simplify 64-bit file support by introducing z_off64_t type
-- Make shared object files in objs directory to work around old Sun cc
-- Use only three-part version number for Darwin shared compiles
-- Add rc option to ar in Makefile.in for when ./configure not run
-- Add -WI,-rpath,. to LDFLAGS for OSF 1 V4*
-- Set LD_LIBRARYN32_PATH for SGI IRIX shared compile
-- Protect against _FILE_OFFSET_BITS being defined when compiling zlib
-- Rename Makefile.in targets allstatic to static and allshared to shared
-- Fix static and shared Makefile.in targets to be independent
-- Correct error return bug in gz_open() by setting state [Brown]
-- Put spaces before ;;'s in configure for better sh compatibility
-- Add pigz.c (parallel implementation of gzip) to examples/
-- Correct constant in crc32.c to UL [Leventhal]
-- Reject negative lengths in crc32_combine()
-- Add inflateReset2() function to work like inflateEnd()/inflateInit2()
-- Include sys/types.h for _LARGEFILE64_SOURCE [Brown]
-- Correct typo in doc/algorithm.txt [Janik]
-- Fix bug in adler32_combine() [Zhu]
-- Catch missing-end-of-block-code error in all inflates and in puff
-    Assures that random input to inflate eventually results in an error
-- Added enough.c (calculation of ENOUGH for inftrees.h) to examples/
-- Update ENOUGH and its usage to reflect discovered bounds
-- Fix gzerror() error report on empty input file [Brown]
-- Add ush casts in trees.c to avoid pedantic runtime errors
-- Fix typo in zlib.h uncompress() description [Reiss]
-- Correct inflate() comments with regard to automatic header detection
-- Remove deprecation comment on Z_PARTIAL_FLUSH (it stays)
-- Put new version of gzlog (2.0) in examples with interruption recovery
-- Add puff compile option to permit invalid distance-too-far streams
-- Add puff TEST command options, ability to read piped input
-- Prototype the *64 functions in zlib.h when _FILE_OFFSET_BITS == 64, but
-  _LARGEFILE64_SOURCE not defined
-- Fix Z_FULL_FLUSH to truly erase the past by resetting s->strstart
-- Fix deflateSetDictionary() to use all 32K for output consistency
-- Remove extraneous #define MIN_LOOKAHEAD in deflate.c (in deflate.h)
-- Clear bytes after deflate lookahead to avoid use of uninitialized data
-- Change a limit in inftrees.c to be more transparent to Coverity Prevent
-- Update win32/zlib.def with exported symbols from zlib.h
-- Correct spelling error in zlib.h [Willem]
-- Allow Z_BLOCK for deflate() to force a new block
-- Allow negative bits in inflatePrime() to delete existing bit buffer
-- Add Z_TREES flush option to inflate() to return at end of trees
-- Add inflateMark() to return current state information for random access
-- Add Makefile for NintendoDS to contrib [Costa]
-- Add -w in configure compile tests to avoid spurious warnings [Beucler]
-- Fix typos in zlib.h comments for deflateSetDictionary()
-- Fix EOF detection in transparent gzread() [Maier]
-
-Changes in 1.2.3.3 (2 October 2006)
-- Make --shared the default for configure, add a --static option
-- Add compile option to permit invalid distance-too-far streams
-- Add inflateUndermine() function which is required to enable above
-- Remove use of "this" variable name for C++ compatibility [Marquess]
-- Add testing of shared library in make test, if shared library built
-- Use ftello() and fseeko() if available instead of ftell() and fseek()
-- Provide two versions of all functions that use the z_off_t type for
-  binary compatibility -- a normal version and a 64-bit offset version,
-  per the Large File Support Extension when _LARGEFILE64_SOURCE is
-  defined; use the 64-bit versions by default when _FILE_OFFSET_BITS
-  is defined to be 64
-- Add a --uname= option to configure to perhaps help with cross-compiling
-
-Changes in 1.2.3.2 (3 September 2006)
-- Turn off silly Borland warnings [Hay]
-- Use off64_t and define _LARGEFILE64_SOURCE when present
-- Fix missing dependency on inffixed.h in Makefile.in
-- Rig configure --shared to build both shared and static [Teredesai, Truta]
-- Remove zconf.in.h and instead create a new zlibdefs.h file
-- Fix contrib/minizip/unzip.c non-encrypted after encrypted [Vollant]
-- Add treebuild.xml (see http://treebuild.metux.de/) [Weigelt]
-
-Changes in 1.2.3.1 (16 August 2006)
-- Add watcom directory with OpenWatcom make files [Daniel]
-- Remove #undef of FAR in zconf.in.h for MVS [Fedtke]
-- Update make_vms.com [Zinser]
-- Use -fPIC for shared build in configure [Teredesai, Nicholson]
-- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen]
-- Use fdopen() (not _fdopen()) for Interix in zutil.h [BŠck]
-- Add some FAQ entries about the contrib directory
-- Update the MVS question in the FAQ
-- Avoid extraneous reads after EOF in gzio.c [Brown]
-- Correct spelling of "successfully" in gzio.c [Randers-Pehrson]
-- Add comments to zlib.h about gzerror() usage [Brown]
-- Set extra flags in gzip header in gzopen() like deflate() does
-- Make configure options more compatible with double-dash conventions
-  [Weigelt]
-- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen]
-- Fix uninstall target in Makefile.in [Truta]
-- Add pkgconfig support [Weigelt]
-- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt]
-- Replace set_data_type() with a more accurate detect_data_type() in
-  trees.c, according to the txtvsbin.txt document [Truta]
-- Swap the order of #include <stdio.h> and #include "zlib.h" in
-  gzio.c, example.c and minigzip.c [Truta]
-- Shut up annoying VS2005 warnings about standard C deprecation [Rowe,
-  Truta] (where?)
-- Fix target "clean" from win32/Makefile.bor [Truta]
-- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe]
-- Update zlib www home address in win32/DLL_FAQ.txt [Truta]
-- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove]
-- Enable browse info in the "Debug" and "ASM Debug" configurations in
-  the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta]
-- Add pkgconfig support [Weigelt]
-- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h,
-  for use in win32/zlib1.rc [Polushin, Rowe, Truta]
-- Add a document that explains the new text detection scheme to
-  doc/txtvsbin.txt [Truta]
-- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta]
-- Move algorithm.txt into doc/ [Truta]
-- Synchronize FAQ with website
-- Fix compressBound(), was low for some pathological cases [Fearnley]
-- Take into account wrapper variations in deflateBound()
-- Set examples/zpipe.c input and output to binary mode for Windows
-- Update examples/zlib_how.html with new zpipe.c (also web site)
-- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems
-  that gcc became pickier in 4.0)
-- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain
-  un-versioned, the patch adds versioning only for symbols introduced in
-  zlib-1.2.0 or later.  It also declares as local those symbols which are
-  not designed to be exported." [Levin]
-- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure
-- Do not initialize global static by default in trees.c, add a response
-  NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess]
-- Don't use strerror() in gzio.c under WinCE [Yakimov]
-- Don't use errno.h in zutil.h under WinCE [Yakimov]
-- Move arguments for AR to its usage to allow replacing ar [Marot]
-- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson]
-- Improve inflateInit() and inflateInit2() documentation
-- Fix structure size comment in inflate.h
-- Change configure help option from --h* to --help [Santos]
-
-Changes in 1.2.3 (18 July 2005)
-- Apply security vulnerability fixes to contrib/infback9 as well
-- Clean up some text files (carriage returns, trailing space)
-- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
-
-Changes in 1.2.2.4 (11 July 2005)
-- Add inflatePrime() function for starting inflation at bit boundary
-- Avoid some Visual C warnings in deflate.c
-- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
-  compile
-- Fix some spelling errors in comments [Betts]
-- Correct inflateInit2() error return documentation in zlib.h
-- Add zran.c example of compressed data random access to examples
-  directory, shows use of inflatePrime()
-- Fix cast for assignments to strm->state in inflate.c and infback.c
-- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
-- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
-- Add cast in trees.c t avoid a warning [Oberhumer]
-- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
-- Update make_vms.com [Zinser]
-- Initialize state->write in inflateReset() since copied in inflate_fast()
-- Be more strict on incomplete code sets in inflate_table() and increase
-  ENOUGH and MAXD -- this repairs a possible security vulnerability for
-  invalid inflate input.  Thanks to Tavis Ormandy and Markus Oberhumer for
-  discovering the vulnerability and providing test cases.
-- Add ia64 support to configure for HP-UX [Smith]
-- Add error return to gzread() for format or i/o error [Levin]
-- Use malloc.h for OS/2 [Necasek]
-
-Changes in 1.2.2.3 (27 May 2005)
-- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
-- Typecast fread() return values in gzio.c [Vollant]
-- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
-- Fix crc check bug in gzread() after gzungetc() [Heiner]
-- Add the deflateTune() function to adjust internal compression parameters
-- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
-- Remove an incorrect assertion in examples/zpipe.c
-- Add C++ wrapper in infback9.h [Donais]
-- Fix bug in inflateCopy() when decoding fixed codes
-- Note in zlib.h how much deflateSetDictionary() actually uses
-- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
-- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
-- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
-- Add gzdirect() function to indicate transparent reads
-- Update contrib/minizip [Vollant]
-- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
-- Add casts in crc32.c to avoid warnings [Oberhumer]
-- Add contrib/masmx64 [Vollant]
-- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
-
-Changes in 1.2.2.2 (30 December 2004)
-- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
-  avoid implicit memcpy calls (portability for no-library compilation)
-- Increase sprintf() buffer size in gzdopen() to allow for large numbers
-- Add INFLATE_STRICT to check distances against zlib header
-- Improve WinCE errno handling and comments [Chang]
-- Remove comment about no gzip header processing in FAQ
-- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
-- Add updated make_vms.com [Coghlan], update README
-- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
-  fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
-- Add FAQ entry and comments in deflate.c on uninitialized memory access
-- Add Solaris 9 make options in configure [Gilbert]
-- Allow strerror() usage in gzio.c for STDC
-- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
-- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
-- Use z_off_t for adler32_combine() and crc32_combine() lengths
-- Make adler32() much faster for small len
-- Use OS_CODE in deflate() default gzip header
-
-Changes in 1.2.2.1 (31 October 2004)
-- Allow inflateSetDictionary() call for raw inflate
-- Fix inflate header crc check bug for file names and comments
-- Add deflateSetHeader() and gz_header structure for custom gzip headers
-- Add inflateGetheader() to retrieve gzip headers
-- Add crc32_combine() and adler32_combine() functions
-- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
-- Use zstreamp consistently in zlib.h (inflate_back functions)
-- Remove GUNZIP condition from definition of inflate_mode in inflate.h
-  and in contrib/inflate86/inffast.S [Truta, Anderson]
-- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
-- Update projects/README.projects and projects/visualc6 [Truta]
-- Update win32/DLL_FAQ.txt [Truta]
-- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
-- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
-- Use a new algorithm for setting strm->data_type in trees.c [Truta]
-- Do not define an exit() prototype in zutil.c unless DEBUG defined
-- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
-- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
-- Fix Darwin build version identification [Peterson]
-
-Changes in 1.2.2 (3 October 2004)
-- Update zlib.h comments on gzip in-memory processing
-- Set adler to 1 in inflateReset() to support Java test suite [Walles]
-- Add contrib/dotzlib [Ravn]
-- Update win32/DLL_FAQ.txt [Truta]
-- Update contrib/minizip [Vollant]
-- Move contrib/visual-basic.txt to old/ [Truta]
-- Fix assembler builds in projects/visualc6/ [Truta]
-
-Changes in 1.2.1.2 (9 September 2004)
-- Update INDEX file
-- Fix trees.c to update strm->data_type (no one ever noticed!)
-- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown]
-- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE)
-- Add limited multitasking protection to DYNAMIC_CRC_TABLE
-- Add NO_vsnprintf for VMS in zutil.h [Mozilla]
-- Don't declare strerror() under VMS [Mozilla]
-- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize
-- Update contrib/ada [Anisimkov]
-- Update contrib/minizip [Vollant]
-- Fix configure to not hardcode directories for Darwin [Peterson]
-- Fix gzio.c to not return error on empty files [Brown]
-- Fix indentation; update version in contrib/delphi/ZLib.pas and
-  contrib/pascal/zlibpas.pas [Truta]
-- Update mkasm.bat in contrib/masmx86 [Truta]
-- Update contrib/untgz [Truta]
-- Add projects/README.projects [Truta]
-- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta]
-- Update win32/DLL_FAQ.txt [Truta]
-- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta]
-- Remove an unnecessary assignment to curr in inftrees.c [Truta]
-- Add OS/2 to exe builds in configure [Poltorak]
-- Remove err dummy parameter in zlib.h [Kientzle]
-
-Changes in 1.2.1.1 (9 January 2004)
-- Update email address in README
-- Several FAQ updates
-- Fix a big fat bug in inftrees.c that prevented decoding valid
-  dynamic blocks with only literals and no distance codes --
-  Thanks to "Hot Emu" for the bug report and sample file
-- Add a note to puff.c on no distance codes case.
-
-Changes in 1.2.1 (17 November 2003)
-- Remove a tab in contrib/gzappend/gzappend.c
-- Update some interfaces in contrib for new zlib functions
-- Update zlib version number in some contrib entries
-- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta]
-- Support shared libraries on Hurd and KFreeBSD [Brown]
-- Fix error in NO_DIVIDE option of adler32.c
-
-Changes in 1.2.0.8 (4 November 2003)
-- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas
-- Add experimental NO_DIVIDE #define in adler32.c
-    - Possibly faster on some processors (let me know if it is)
-- Correct Z_BLOCK to not return on first inflate call if no wrap
-- Fix strm->data_type on inflate() return to correctly indicate EOB
-- Add deflatePrime() function for appending in the middle of a byte
-- Add contrib/gzappend for an example of appending to a stream
-- Update win32/DLL_FAQ.txt [Truta]
-- Delete Turbo C comment in README [Truta]
-- Improve some indentation in zconf.h [Truta]
-- Fix infinite loop on bad input in configure script [Church]
-- Fix gzeof() for concatenated gzip files [Johnson]
-- Add example to contrib/visual-basic.txt [Michael B.]
-- Add -p to mkdir's in Makefile.in [vda]
-- Fix configure to properly detect presence or lack of printf functions
-- Add AS400 support [Monnerat]
-- Add a little Cygwin support [Wilson]
-
-Changes in 1.2.0.7 (21 September 2003)
-- Correct some debug formats in contrib/infback9
-- Cast a type in a debug statement in trees.c
-- Change search and replace delimiter in configure from % to # [Beebe]
-- Update contrib/untgz to 0.2 with various fixes [Truta]
-- Add build support for Amiga [Nikl]
-- Remove some directories in old that have been updated to 1.2
-- Add dylib building for Mac OS X in configure and Makefile.in
-- Remove old distribution stuff from Makefile
-- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X
-- Update links in README
-
-Changes in 1.2.0.6 (13 September 2003)
-- Minor FAQ updates
-- Update contrib/minizip to 1.00 [Vollant]
-- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta]
-- Update POSTINC comment for 68060 [Nikl]
-- Add contrib/infback9 with deflate64 decoding (unsupported)
-- For MVS define NO_vsnprintf and undefine FAR [van Burik]
-- Add pragma for fdopen on MVS [van Burik]
-
-Changes in 1.2.0.5 (8 September 2003)
-- Add OF to inflateBackEnd() declaration in zlib.h
-- Remember start when using gzdopen in the middle of a file
-- Use internal off_t counters in gz* functions to properly handle seeks
-- Perform more rigorous check for distance-too-far in inffast.c
-- Add Z_BLOCK flush option to return from inflate at block boundary
-- Set strm->data_type on return from inflate
-    - Indicate bits unused, if at block boundary, and if in last block
-- Replace size_t with ptrdiff_t in crc32.c, and check for correct size
-- Add condition so old NO_DEFLATE define still works for compatibility
-- FAQ update regarding the Windows DLL [Truta]
-- INDEX update: add qnx entry, remove aix entry [Truta]
-- Install zlib.3 into mandir [Wilson]
-- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta]
-- Adapt the zlib interface to the new DLL convention guidelines [Truta]
-- Introduce ZLIB_WINAPI macro to allow the export of functions using
-  the WINAPI calling convention, for Visual Basic [Vollant, Truta]
-- Update msdos and win32 scripts and makefiles [Truta]
-- Export symbols by name, not by ordinal, in win32/zlib.def [Truta]
-- Add contrib/ada [Anisimkov]
-- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta]
-- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant]
-- Add contrib/masm686 [Truta]
-- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm
-  [Truta, Vollant]
-- Update contrib/delphi; rename to contrib/pascal; add example [Truta]
-- Remove contrib/delphi2; add a new contrib/delphi [Truta]
-- Avoid inclusion of the nonstandard <memory.h> in contrib/iostream,
-  and fix some method prototypes [Truta]
-- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip
-  [Truta]
-- Avoid the use of backslash (\) in contrib/minizip [Vollant]
-- Fix file time handling in contrib/untgz; update makefiles [Truta]
-- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines
-  [Vollant]
-- Remove contrib/vstudio/vc15_16 [Vollant]
-- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta]
-- Update README.contrib [Truta]
-- Invert the assignment order of match_head and s->prev[...] in
-  INSERT_STRING [Truta]
-- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings
-  [Truta]
-- Compare function pointers with 0, not with NULL or Z_NULL [Truta]
-- Fix prototype of syncsearch in inflate.c [Truta]
-- Introduce ASMINF macro to be enabled when using an ASM implementation
-  of inflate_fast [Truta]
-- Change NO_DEFLATE to NO_GZCOMPRESS [Truta]
-- Modify test_gzio in example.c to take a single file name as a
-  parameter [Truta]
-- Exit the example.c program if gzopen fails [Truta]
-- Add type casts around strlen in example.c [Truta]
-- Remove casting to sizeof in minigzip.c; give a proper type
-  to the variable compared with SUFFIX_LEN [Truta]
-- Update definitions of STDC and STDC99 in zconf.h [Truta]
-- Synchronize zconf.h with the new Windows DLL interface [Truta]
-- Use SYS16BIT instead of __32BIT__ to distinguish between
-  16- and 32-bit platforms [Truta]
-- Use far memory allocators in small 16-bit memory models for
-  Turbo C [Truta]
-- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in
-  zlibCompileFlags [Truta]
-- Cygwin has vsnprintf [Wilson]
-- In Windows16, OS_CODE is 0, as in MSDOS [Truta]
-- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson]
-
-Changes in 1.2.0.4 (10 August 2003)
-- Minor FAQ updates
-- Be more strict when checking inflateInit2's windowBits parameter
-- Change NO_GUNZIP compile option to NO_GZIP to cover deflate as well
-- Add gzip wrapper option to deflateInit2 using windowBits
-- Add updated QNX rule in configure and qnx directory [Bonnefoy]
-- Make inflate distance-too-far checks more rigorous
-- Clean up FAR usage in inflate
-- Add casting to sizeof() in gzio.c and minigzip.c
-
-Changes in 1.2.0.3 (19 July 2003)
-- Fix silly error in gzungetc() implementation [Vollant]
-- Update contrib/minizip and contrib/vstudio [Vollant]
-- Fix printf format in example.c
-- Correct cdecl support in zconf.in.h [Anisimkov]
-- Minor FAQ updates
-
-Changes in 1.2.0.2 (13 July 2003)
-- Add ZLIB_VERNUM in zlib.h for numerical preprocessor comparisons
-- Attempt to avoid warnings in crc32.c for pointer-int conversion
-- Add AIX to configure, remove aix directory [Bakker]
-- Add some casts to minigzip.c
-- Improve checking after insecure sprintf() or vsprintf() calls
-- Remove #elif's from crc32.c
-- Change leave label to inf_leave in inflate.c and infback.c to avoid
-  library conflicts
-- Remove inflate gzip decoding by default--only enable gzip decoding by
-  special request for stricter backward compatibility
-- Add zlibCompileFlags() function to return compilation information
-- More typecasting in deflate.c to avoid warnings
-- Remove leading underscore from _Capital #defines [Truta]
-- Fix configure to link shared library when testing
-- Add some Windows CE target adjustments [Mai]
-- Remove #define ZLIB_DLL in zconf.h [Vollant]
-- Add zlib.3 [Rodgers]
-- Update RFC URL in deflate.c and algorithm.txt [Mai]
-- Add zlib_dll_FAQ.txt to contrib [Truta]
-- Add UL to some constants [Truta]
-- Update minizip and vstudio [Vollant]
-- Remove vestigial NEED_DUMMY_RETURN from zconf.in.h
-- Expand use of NO_DUMMY_DECL to avoid all dummy structures
-- Added iostream3 to contrib [Schwardt]
-- Replace rewind() with fseek() for WinCE [Truta]
-- Improve setting of zlib format compression level flags
-    - Report 0 for huffman and rle strategies and for level == 0 or 1
-    - Report 2 only for level == 6
-- Only deal with 64K limit when necessary at compile time [Truta]
-- Allow TOO_FAR check to be turned off at compile time [Truta]
-- Add gzclearerr() function [Souza]
-- Add gzungetc() function
-
-Changes in 1.2.0.1 (17 March 2003)
-- Add Z_RLE strategy for run-length encoding [Truta]
-    - When Z_RLE requested, restrict matches to distance one
-    - Update zlib.h, minigzip.c, gzopen(), gzdopen() for Z_RLE
-- Correct FASTEST compilation to allow level == 0
-- Clean up what gets compiled for FASTEST
-- Incorporate changes to zconf.in.h [Vollant]
-    - Refine detection of Turbo C need for dummy returns
-    - Refine ZLIB_DLL compilation
-    - Include additional header file on VMS for off_t typedef
-- Try to use _vsnprintf where it supplants vsprintf [Vollant]
-- Add some casts in inffast.c
-- Enchance comments in zlib.h on what happens if gzprintf() tries to
-  write more than 4095 bytes before compression
-- Remove unused state from inflateBackEnd()
-- Remove exit(0) from minigzip.c, example.c
-- Get rid of all those darn tabs
-- Add "check" target to Makefile.in that does the same thing as "test"
-- Add "mostlyclean" and "maintainer-clean" targets to Makefile.in
-- Update contrib/inflate86 [Anderson]
-- Update contrib/testzlib, contrib/vstudio, contrib/minizip [Vollant]
-- Add msdos and win32 directories with makefiles [Truta]
-- More additions and improvements to the FAQ
-
-Changes in 1.2.0 (9 March 2003)
-- New and improved inflate code
-    - About 20% faster
-    - Does not allocate 32K window unless and until needed
-    - Automatically detects and decompresses gzip streams
-    - Raw inflate no longer needs an extra dummy byte at end
-    - Added inflateBack functions using a callback interface--even faster
-      than inflate, useful for file utilities (gzip, zip)
-    - Added inflateCopy() function to record state for random access on
-      externally generated deflate streams (e.g. in gzip files)
-    - More readable code (I hope)
-- New and improved crc32()
-    - About 50% faster, thanks to suggestions from Rodney Brown
-- Add deflateBound() and compressBound() functions
-- Fix memory leak in deflateInit2()
-- Permit setting dictionary for raw deflate (for parallel deflate)
-- Fix const declaration for gzwrite()
-- Check for some malloc() failures in gzio.c
-- Fix bug in gzopen() on single-byte file 0x1f
-- Fix bug in gzread() on concatenated file with 0x1f at end of buffer
-  and next buffer doesn't start with 0x8b
-- Fix uncompress() to return Z_DATA_ERROR on truncated input
-- Free memory at end of example.c
-- Remove MAX #define in trees.c (conflicted with some libraries)
-- Fix static const's in deflate.c, gzio.c, and zutil.[ch]
-- Declare malloc() and free() in gzio.c if STDC not defined
-- Use malloc() instead of calloc() in zutil.c if int big enough
-- Define STDC for AIX
-- Add aix/ with approach for compiling shared library on AIX
-- Add HP-UX support for shared libraries in configure
-- Add OpenUNIX support for shared libraries in configure
-- Use $cc instead of gcc to build shared library
-- Make prefix directory if needed when installing
-- Correct Macintosh avoidance of typedef Byte in zconf.h
-- Correct Turbo C memory allocation when under Linux
-- Use libz.a instead of -lz in Makefile (assure use of compiled library)
-- Update configure to check for snprintf or vsnprintf functions and their
-  return value, warn during make if using an insecure function
-- Fix configure problem with compile-time knowledge of HAVE_UNISTD_H that
-  is lost when library is used--resolution is to build new zconf.h
-- Documentation improvements (in zlib.h):
-    - Document raw deflate and inflate
-    - Update RFCs URL
-    - Point out that zlib and gzip formats are different
-    - Note that Z_BUF_ERROR is not fatal
-    - Document string limit for gzprintf() and possible buffer overflow
-    - Note requirement on avail_out when flushing
-    - Note permitted values of flush parameter of inflate()
-- Add some FAQs (and even answers) to the FAQ
-- Add contrib/inflate86/ for x86 faster inflate
-- Add contrib/blast/ for PKWare Data Compression Library decompression
-- Add contrib/puff/ simple inflate for deflate format description
-
-Changes in 1.1.4 (11 March 2002)
-- ZFREE was repeated on same allocation on some error conditions.
-  This creates a security problem described in
-  http://www.zlib.org/advisory-2002-03-11.txt
-- Returned incorrect error (Z_MEM_ERROR) on some invalid data
-- Avoid accesses before window for invalid distances with inflate window
-  less than 32K.
-- force windowBits > 8 to avoid a bug in the encoder for a window size
-  of 256 bytes. (A complete fix will be available in 1.1.5).
-
-Changes in 1.1.3 (9 July 1998)
-- fix "an inflate input buffer bug that shows up on rare but persistent
-  occasions" (Mark)
-- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
-- fix gzseek(..., SEEK_SET) in write mode
-- fix crc check after a gzeek (Frank Faubert)
-- fix miniunzip when the last entry in a zip file is itself a zip file
-  (J Lillge)
-- add contrib/asm586 and contrib/asm686 (Brian Raiter)
-  See http://www.muppetlabs.com/~breadbox/software/assembly.html
-- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
-- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
-- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
-- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
-- added a FAQ file
-
-- Support gzdopen on Mac with Metrowerks (Jason Linhart)
-- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
-- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
-- avoid some warnings with Borland C (Tom Tanner)
-- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
-- emulate utime() for WIN32 in contrib/untgz  (Gilles Vollant)
-- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
-- use libdir and includedir in Makefile.in (Tim Mooney)
-- support shared libraries on OSF1 V4 (Tim Mooney)
-- remove so_locations in "make clean"  (Tim Mooney)
-- fix maketree.c compilation error (Glenn, Mark)
-- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
-- new Makefile.riscos (Rich Walker)
-- initialize static descriptors in trees.c for embedded targets (Nick Smith)
-- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
-- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
-- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
-- fix maketree.c to allow clean compilation of inffixed.h (Mark)
-- fix parameter check in deflateCopy (Gunther Nikl)
-- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
-- Many portability patches by Christian Spieler:
-  . zutil.c, zutil.h: added "const" for zmem*
-  . Make_vms.com: fixed some typos
-  . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
-  . msdos/Makefile.msc: remove "default rtl link library" info from obj files
-  . msdos/Makefile.*: use model-dependent name for the built zlib library
-  . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
-     new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
-- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
-- replace __far with _far for better portability (Christian Spieler, Tom Lane)
-- fix test for errno.h in configure (Tim Newsham)
-
-Changes in 1.1.2 (19 March 98)
-- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
-  See http://www.winimage.com/zLibDll/unzip.html
-- preinitialize the inflate tables for fixed codes, to make the code
-  completely thread safe (Mark)
-- some simplifications and slight speed-up to the inflate code (Mark)
-- fix gzeof on non-compressed files (Allan Schrum)
-- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
-- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
-- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
-- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
-- do not wrap extern "C" around system includes (Tom Lane)
-- mention zlib binding for TCL in README (Andreas Kupries)
-- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
-- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
-- allow "configure --prefix $HOME" (Tim Mooney)
-- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
-- move Makefile.sas to amiga/Makefile.sas
-
-Changes in 1.1.1 (27 Feb 98)
-- fix macros _tr_tally_* in deflate.h for debug mode  (Glenn Randers-Pehrson)
-- remove block truncation heuristic which had very marginal effect for zlib
-  (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
-  compression ratio on some files. This also allows inlining _tr_tally for
-  matches in deflate_slow.
-- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
-
-Changes in 1.1.0 (24 Feb 98)
-- do not return STREAM_END prematurely in inflate (John Bowler)
-- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
-- compile with -DFASTEST to get compression code optimized for speed only
-- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
-- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
-  on Sun but significant on HP)
-
-- add a pointer to experimental unzip library in README (Gilles Vollant)
-- initialize variable gcc in configure (Chris Herborth)
-
-Changes in 1.0.9 (17 Feb 1998)
-- added gzputs and gzgets functions
-- do not clear eof flag in gzseek (Mark Diekhans)
-- fix gzseek for files in transparent mode (Mark Diekhans)
-- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
-- replace EXPORT with ZEXPORT to avoid conflict with other programs
-- added compress2 in zconf.h, zlib.def, zlib.dnt
-- new asm code from Gilles Vollant in contrib/asm386
-- simplify the inflate code (Mark):
- . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
- . ZALLOC the length list in inflate_trees_fixed() instead of using stack
- . ZALLOC the value area for huft_build() instead of using stack
- . Simplify Z_FINISH check in inflate()
-
-- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
-- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
-- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
-  the declaration of FAR (Gilles VOllant)
-- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
-- read_buf buf parameter of type Bytef* instead of charf*
-- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
-- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
-- fix check for presence of directories in "make install" (Ian Willis)
-
-Changes in 1.0.8 (27 Jan 1998)
-- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
-- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
-- added compress2() to allow setting the compression level
-- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
-- use constant arrays for the static trees in trees.c instead of computing
-  them at run time (thanks to Ken Raeburn for this suggestion). To create
-  trees.h, compile with GEN_TREES_H and run "make test".
-- check return code of example in "make test" and display result
-- pass minigzip command line options to file_compress
-- simplifying code of inflateSync to avoid gcc 2.8 bug
-
-- support CC="gcc -Wall" in configure -s (QingLong)
-- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
-- fix test for shared library support to avoid compiler warnings
-- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
-- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
-- do not use fdopen for Metrowerks on Mac (Brad Pettit))
-- add checks for gzputc and gzputc in example.c
-- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
-- use const for the CRC table (Ken Raeburn)
-- fixed "make uninstall" for shared libraries
-- use Tracev instead of Trace in infblock.c
-- in example.c use correct compressed length for test_sync
-- suppress +vnocompatwarnings in configure for HPUX (not always supported)
-
-Changes in 1.0.7 (20 Jan 1998)
-- fix gzseek which was broken in write mode
-- return error for gzseek to negative absolute position
-- fix configure for Linux (Chun-Chung Chen)
-- increase stack space for MSC (Tim Wegner)
-- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
-- define EXPORTVA for gzprintf (Gilles Vollant)
-- added man page zlib.3 (Rick Rodgers)
-- for contrib/untgz, fix makedir() and improve Makefile
-
-- check gzseek in write mode in example.c
-- allocate extra buffer for seeks only if gzseek is actually called
-- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
-- add inflateSyncPoint in zconf.h
-- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
-
-Changes in 1.0.6 (19 Jan 1998)
-- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
-  gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
-- Fix a deflate bug occurring only with compression level 0 (thanks to
-  Andy Buckler for finding this one).
-- In minigzip, pass transparently also the first byte for .Z files.
-- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
-- check Z_FINISH in inflate (thanks to Marc Schluper)
-- Implement deflateCopy (thanks to Adam Costello)
-- make static libraries by default in configure, add --shared option.
-- move MSDOS or Windows specific files to directory msdos
-- suppress the notion of partial flush to simplify the interface
-  (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
-- suppress history buffer provided by application to simplify the interface
-  (this feature was not implemented anyway in 1.0.4)
-- next_in and avail_in must be initialized before calling inflateInit or
-  inflateInit2
-- add EXPORT in all exported functions (for Windows DLL)
-- added Makefile.nt (thanks to Stephen Williams)
-- added the unsupported "contrib" directory:
-   contrib/asm386/ by Gilles Vollant <info@winimage.com>
-        386 asm code replacing longest_match().
-   contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
-        A C++ I/O streams interface to the zlib gz* functions
-   contrib/iostream2/  by Tyge Løvset <Tyge.Lovset@cmr.no>
-        Another C++ I/O streams interface
-   contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
-        A very simple tar.gz file extractor using zlib
-   contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
-        How to use compress(), uncompress() and the gz* functions from VB.
-- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
-  level) in minigzip (thanks to Tom Lane)
-
-- use const for rommable constants in deflate
-- added test for gzseek and gztell in example.c
-- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
-- add undocumented function zError to convert error code to string
-  (for Tim Smithers)
-- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
-- Use default memcpy for Symantec MSDOS compiler.
-- Add EXPORT keyword for check_func (needed for Windows DLL)
-- add current directory to LD_LIBRARY_PATH for "make test"
-- create also a link for libz.so.1
-- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
-- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
-- added -soname for Linux in configure (Chun-Chung Chen,
-- assign numbers to the exported functions in zlib.def (for Windows DLL)
-- add advice in zlib.h for best usage of deflateSetDictionary
-- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
-- allow compilation with ANSI keywords only enabled for TurboC in large model
-- avoid "versionString"[0] (Borland bug)
-- add NEED_DUMMY_RETURN for Borland
-- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
-- allow compilation with CC
-- defined STDC for OS/2 (David Charlap)
-- limit external names to 8 chars for MVS (Thomas Lund)
-- in minigzip.c, use static buffers only for 16-bit systems
-- fix suffix check for "minigzip -d foo.gz"
-- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
-- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
-- added makelcc.bat for lcc-win32 (Tom St Denis)
-- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
-- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
-- check for unistd.h in configure (for off_t)
-- remove useless check parameter in inflate_blocks_free
-- avoid useless assignment of s->check to itself in inflate_blocks_new
-- do not flush twice in gzclose (thanks to Ken Raeburn)
-- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
-- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
-- work around buggy fclose on pipes for HP/UX
-- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
-- fix configure if CC is already equal to gcc
-
-Changes in 1.0.5 (3 Jan 98)
-- Fix inflate to terminate gracefully when fed corrupted or invalid data
-- Use const for rommable constants in inflate
-- Eliminate memory leaks on error conditions in inflate
-- Removed some vestigial code in inflate
-- Update web address in README
-
-Changes in 1.0.4 (24 Jul 96)
-- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
-  bit, so the decompressor could decompress all the correct data but went
-  on to attempt decompressing extra garbage data. This affected minigzip too.
-- zlibVersion and gzerror return const char* (needed for DLL)
-- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
-- use z_error only for DEBUG (avoid problem with DLLs)
-
-Changes in 1.0.3 (2 Jul 96)
-- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
-  small and medium models; this makes the library incompatible with previous
-  versions for these models. (No effect in large model or on other systems.)
-- return OK instead of BUF_ERROR if previous deflate call returned with
-  avail_out as zero but there is nothing to do
-- added memcmp for non STDC compilers
-- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
-- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
-- better check for 16-bit mode MSC (avoids problem with Symantec)
-
-Changes in 1.0.2 (23 May 96)
-- added Windows DLL support
-- added a function zlibVersion (for the DLL support)
-- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
-- Bytef is define's instead of typedef'd only for Borland C
-- avoid reading uninitialized memory in example.c
-- mention in README that the zlib format is now RFC1950
-- updated Makefile.dj2
-- added algorithm.doc
-
-Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
-- fix array overlay in deflate.c which sometimes caused bad compressed data
-- fix inflate bug with empty stored block
-- fix MSDOS medium model which was broken in 0.99
-- fix deflateParams() which could generated bad compressed data.
-- Bytef is define'd instead of typedef'ed (work around Borland bug)
-- added an INDEX file
-- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
-  Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
-- speed up adler32 for modern machines without auto-increment
-- added -ansi for IRIX in configure
-- static_init_done in trees.c is an int
-- define unlink as delete for VMS
-- fix configure for QNX
-- add configure branch for SCO and HPUX
-- avoid many warnings (unused variables, dead assignments, etc...)
-- no fdopen for BeOS
-- fix the Watcom fix for 32 bit mode (define FAR as empty)
-- removed redefinition of Byte for MKWERKS
-- work around an MWKERKS bug (incorrect merge of all .h files)
-
-Changes in 0.99 (27 Jan 96)
-- allow preset dictionary shared between compressor and decompressor
-- allow compression level 0 (no compression)
-- add deflateParams in zlib.h: allow dynamic change of compression level
-  and compression strategy.
-- test large buffers and deflateParams in example.c
-- add optional "configure" to build zlib as a shared library
-- suppress Makefile.qnx, use configure instead
-- fixed deflate for 64-bit systems (detected on Cray)
-- fixed inflate_blocks for 64-bit systems (detected on Alpha)
-- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
-- always return Z_BUF_ERROR when deflate() has nothing to do
-- deflateInit and inflateInit are now macros to allow version checking
-- prefix all global functions and types with z_ with -DZ_PREFIX
-- make falloc completely reentrant (inftrees.c)
-- fixed very unlikely race condition in ct_static_init
-- free in reverse order of allocation to help memory manager
-- use zlib-1.0/* instead of zlib/* inside the tar.gz
-- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
-  -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
-- allow gzread on concatenated .gz files
-- deflateEnd now returns Z_DATA_ERROR if it was premature
-- deflate is finally (?) fully deterministic (no matches beyond end of input)
-- Document Z_SYNC_FLUSH
-- add uninstall in Makefile
-- Check for __cpluplus in zlib.h
-- Better test in ct_align for partial flush
-- avoid harmless warnings for Borland C++
-- initialize hash_head in deflate.c
-- avoid warning on fdopen (gzio.c) for HP cc -Aa
-- include stdlib.h for STDC compilers
-- include errno.h for Cray
-- ignore error if ranlib doesn't exist
-- call ranlib twice for NeXTSTEP
-- use exec_prefix instead of prefix for libz.a
-- renamed ct_* as _tr_* to avoid conflict with applications
-- clear z->msg in inflateInit2 before any error return
-- initialize opaque in example.c, gzio.c, deflate.c and inflate.c
-- fixed typo in zconf.h (_GNUC__ => __GNUC__)
-- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
-- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
-- in fcalloc, normalize pointer if size > 65520 bytes
-- don't use special fcalloc for 32 bit Borland C++
-- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
-- use Z_BINARY instead of BINARY
-- document that gzclose after gzdopen will close the file
-- allow "a" as mode in gzopen.
-- fix error checking in gzread
-- allow skipping .gz extra-field on pipes
-- added reference to Perl interface in README
-- put the crc table in FAR data (I dislike more and more the medium model :)
-- added get_crc_table
-- added a dimension to all arrays (Borland C can't count).
-- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
-- guard against multiple inclusion of *.h (for precompiled header on Mac)
-- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
-- don't use unsized arrays to avoid silly warnings by Visual C++:
-     warning C4746: 'inflate_mask' : unsized array treated as  '__far'
-     (what's wrong with far data in far model?).
-- define enum out of inflate_blocks_state to allow compilation with C++
-
-Changes in 0.95 (16 Aug 95)
-- fix MSDOS small and medium model (now easier to adapt to any compiler)
-- inlined send_bits
-- fix the final (:-) bug for deflate with flush (output was correct but
-  not completely flushed in rare occasions).
-- default window size is same for compression and decompression
-  (it's now sufficient to set MAX_WBITS in zconf.h).
-- voidp -> voidpf and voidnp -> voidp (for consistency with other
-  typedefs and because voidnp was not near in large model).
-
-Changes in 0.94 (13 Aug 95)
-- support MSDOS medium model
-- fix deflate with flush (could sometimes generate bad output)
-- fix deflateReset (zlib header was incorrectly suppressed)
-- added support for VMS
-- allow a compression level in gzopen()
-- gzflush now calls fflush
-- For deflate with flush, flush even if no more input is provided.
-- rename libgz.a as libz.a
-- avoid complex expression in infcodes.c triggering Turbo C bug
-- work around a problem with gcc on Alpha (in INSERT_STRING)
-- don't use inline functions (problem with some gcc versions)
-- allow renaming of Byte, uInt, etc... with #define.
-- avoid warning about (unused) pointer before start of array in deflate.c
-- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
-- avoid reserved word 'new' in trees.c
-
-Changes in 0.93 (25 June 95)
-- temporarily disable inline functions
-- make deflate deterministic
-- give enough lookahead for PARTIAL_FLUSH
-- Set binary mode for stdin/stdout in minigzip.c for OS/2
-- don't even use signed char in inflate (not portable enough)
-- fix inflate memory leak for segmented architectures
-
-Changes in 0.92 (3 May 95)
-- don't assume that char is signed (problem on SGI)
-- Clear bit buffer when starting a stored block
-- no memcpy on Pyramid
-- suppressed inftest.c
-- optimized fill_window, put longest_match inline for gcc
-- optimized inflate on stored blocks.
-- untabify all sources to simplify patches
-
-Changes in 0.91 (2 May 95)
-- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
-- Document the memory requirements in zconf.h
-- added "make install"
-- fix sync search logic in inflateSync
-- deflate(Z_FULL_FLUSH) now works even if output buffer too short
-- after inflateSync, don't scare people with just "lo world"
-- added support for DJGPP
-
-Changes in 0.9 (1 May 95)
-- don't assume that zalloc clears the allocated memory (the TurboC bug
-  was Mark's bug after all :)
-- let again gzread copy uncompressed data unchanged (was working in 0.71)
-- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
-- added a test of inflateSync in example.c
-- moved MAX_WBITS to zconf.h because users might want to change that.
-- document explicitly that zalloc(64K) on MSDOS must return a normalized
-  pointer (zero offset)
-- added Makefiles for Microsoft C, Turbo C, Borland C++
-- faster crc32()
-
-Changes in 0.8 (29 April 95)
-- added fast inflate (inffast.c)
-- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
-  is incompatible with previous versions of zlib which returned Z_OK.
-- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
-  (actually that was not a compiler bug, see 0.81 above)
-- gzread no longer reads one extra byte in certain cases
-- In gzio destroy(), don't reference a freed structure
-- avoid many warnings for MSDOS
-- avoid the ERROR symbol which is used by MS Windows
-
-Changes in 0.71 (14 April 95)
-- Fixed more MSDOS compilation problems :( There is still a bug with
-  TurboC large model.
-
-Changes in 0.7 (14 April 95)
-- Added full inflate support.
-- Simplified the crc32() interface. The pre- and post-conditioning
-  (one's complement) is now done inside crc32(). WARNING: this is
-  incompatible with previous versions; see zlib.h for the new usage.
-
-Changes in 0.61 (12 April 95)
-- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
-
-Changes in 0.6 (11 April 95)
-- added minigzip.c
-- added gzdopen to reopen a file descriptor as gzFile
-- added transparent reading of non-gziped files in gzread.
-- fixed bug in gzread (don't read crc as data)
-- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
-- don't allocate big arrays in the stack (for MSDOS)
-- fix some MSDOS compilation problems
-
-Changes in 0.5:
-- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
-  not yet Z_FULL_FLUSH.
-- support decompression but only in a single step (forced Z_FINISH)
-- added opaque object for zalloc and zfree.
-- added deflateReset and inflateReset
-- added a variable zlib_version for consistency checking.
-- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
-  Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
-
-Changes in 0.4:
-- avoid "zip" everywhere, use zlib instead of ziplib.
-- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
-  if compression method == 8.
-- added adler32 and crc32
-- renamed deflateOptions as deflateInit2, call one or the other but not both
-- added the method parameter for deflateInit2.
-- added inflateInit2
-- simplied considerably deflateInit and inflateInit by not supporting
-  user-provided history buffer. This is supported only in deflateInit2
-  and inflateInit2.
-
-Changes in 0.3:
-- prefix all macro names with Z_
-- use Z_FINISH instead of deflateEnd to finish compression.
-- added Z_HUFFMAN_ONLY
-- added gzerror()
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/README	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,115 +0,0 @@
-ZLIB DATA COMPRESSION LIBRARY
-
-zlib 1.2.5 is a general purpose data compression library.  All the code is
-thread safe.  The data format used by the zlib library is described by RFCs
-(Request for Comments) 1950 to 1952 in the files
-http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
-and rfc1952.txt (gzip format).
-
-All functions of the compression library are documented in the file zlib.h
-(volunteer to write man pages welcome, contact zlib@gzip.org).  A usage example
-of the library is given in the file example.c which also tests that the library
-is working correctly.  Another example is given in the file minigzip.c.  The
-compression library itself is composed of all source files except example.c and
-minigzip.c.
-
-To compile all files and run the test program, follow the instructions given at
-the top of Makefile.in.  In short "./configure; make test", and if that goes
-well, "make install" should work for most flavors of Unix.  For Windows, use one
-of the special makefiles in win32/ or contrib/vstudio/ .  For VMS, use
-make_vms.com.
-
-Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
-<info@winimage.com> for the Windows DLL version.  The zlib home page is
-http://zlib.net/ .  Before reporting a problem, please check this site to
-verify that you have the latest version of zlib; otherwise get the latest
-version and check whether the problem still exists or not.
-
-PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.
-
-Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
-issue of Dr.  Dobb's Journal; a copy of the article is available at
-http://marknelson.us/1997/01/01/zlib-engine/ .
-
-The changes made in version 1.2.5 are documented in the file ChangeLog.
-
-Unsupported third party contributions are provided in directory contrib/ .
-
-zlib is available in Java using the java.util.zip package, documented at
-http://java.sun.com/developer/technicalArticles/Programming/compression/ .
-
-A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available
-at CPAN (Comprehensive Perl Archive Network) sites, including
-http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
-
-A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
-available in Python 1.5 and later versions, see
-http://www.python.org/doc/lib/module-zlib.html .
-
-zlib is built into tcl: http://wiki.tcl.tk/4610 .
-
-An experimental package to read and write files in .zip format, written on top
-of zlib by Gilles Vollant <info@winimage.com>, is available in the
-contrib/minizip directory of zlib.
-
-
-Notes for some targets:
-
-- For Windows DLL versions, please see win32/DLL_FAQ.txt
-
-- For 64-bit Irix, deflate.c must be compiled without any optimization. With
-  -O, one libpng test fails. The test works in 32 bit mode (with the -n32
-  compiler flag). The compiler bug has been reported to SGI.
-
-- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works
-  when compiled with cc.
-
-- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is
-  necessary to get gzprintf working correctly. This is done by configure.
-
-- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
-  other compilers. Use "make test" to check your compiler.
-
-- gzdopen is not supported on RISCOS or BEOS.
-
-- For PalmOs, see http://palmzlib.sourceforge.net/
-
-
-Acknowledgments:
-
-  The deflate format used by zlib was defined by Phil Katz.  The deflate and
-  zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
-  people who reported problems and suggested various improvements in zlib; they
-  are too numerous to cite here.
-
-Copyright notice:
-
- (C) 1995-2010 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  jloup@gzip.org          madler@alumni.caltech.edu
-
-If you use the zlib library in a product, we would appreciate *not* receiving
-lengthy legal documents to sign.  The sources are provided for free but without
-warranty of any kind.  The library has been entirely written by Jean-loup
-Gailly and Mark Adler; it does not include third-party code.
-
-If you redistribute modified sources, we would appreciate that you include in
-the file ChangeLog history information documenting your changes.  Please read
-the FAQ for more information on the distribution of modified source versions.
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/compress.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,104 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* compress.c -- compress a memory buffer
- * Copyright (C) 1995-2005 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#define ZLIB_INTERNAL
-#include "zlib.h"
-
-/* ===========================================================================
-     Compresses the source buffer into the destination buffer. The level
-   parameter has the same meaning as in deflateInit.  sourceLen is the byte
-   length of the source buffer. Upon entry, destLen is the total size of the
-   destination buffer, which must be at least 0.1% larger than sourceLen plus
-   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
-
-     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
-   Z_STREAM_ERROR if the level parameter is invalid.
-*/
-int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-    int level;
-{
-    z_stream stream;
-    int err;
-
-    stream.next_in = (Bytef*)source;
-    stream.avail_in = (uInt)sourceLen;
-#ifdef MAXSEG_64K
-    /* Check for source > 64K on 16-bit machine: */
-    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
-#endif
-    stream.next_out = dest;
-    stream.avail_out = (uInt)*destLen;
-    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
-
-    stream.zalloc = (alloc_func)0;
-    stream.zfree = (free_func)0;
-    stream.opaque = (voidpf)0;
-
-    err = deflateInit(&stream, level);
-    if (err != Z_OK) return err;
-
-    err = deflate(&stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        deflateEnd(&stream);
-        return err == Z_OK ? Z_BUF_ERROR : err;
-    }
-    *destLen = stream.total_out;
-
-    err = deflateEnd(&stream);
-    return err;
-}
-
-/* ===========================================================================
- */
-int ZEXPORT compress (dest, destLen, source, sourceLen)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-{
-    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
-}
-
-/* ===========================================================================
-     If the default memLevel or windowBits for deflateInit() is changed, then
-   this function needs to be updated.
- */
-uLong ZEXPORT compressBound (sourceLen)
-    uLong sourceLen;
-{
-    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
-           (sourceLen >> 25) + 13;
-}
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/crc32.h	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,465 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* crc32.h -- tables for rapid CRC calculation
- * Generated automatically by crc32.c
- */
-
-local const unsigned long FAR crc_table[TBLS][256] =
-{
-  {
-    0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
-    0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
-    0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
-    0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
-    0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
-    0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
-    0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
-    0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
-    0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
-    0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
-    0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
-    0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
-    0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
-    0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
-    0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
-    0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
-    0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
-    0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
-    0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
-    0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
-    0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
-    0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
-    0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
-    0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
-    0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
-    0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
-    0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
-    0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
-    0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
-    0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
-    0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
-    0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
-    0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
-    0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
-    0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
-    0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
-    0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
-    0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
-    0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
-    0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
-    0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
-    0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
-    0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
-    0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
-    0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
-    0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
-    0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
-    0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
-    0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
-    0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
-    0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
-    0x2d02ef8dUL
-#ifdef BYFOUR
-  },
-  {
-    0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
-    0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
-    0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
-    0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
-    0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
-    0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
-    0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
-    0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
-    0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
-    0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
-    0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
-    0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
-    0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
-    0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
-    0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
-    0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
-    0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
-    0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
-    0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
-    0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
-    0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
-    0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
-    0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
-    0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
-    0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
-    0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
-    0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
-    0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
-    0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
-    0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
-    0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
-    0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
-    0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
-    0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
-    0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
-    0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
-    0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
-    0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
-    0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
-    0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
-    0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
-    0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
-    0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
-    0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
-    0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
-    0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
-    0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
-    0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
-    0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
-    0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
-    0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
-    0x9324fd72UL
-  },
-  {
-    0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
-    0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
-    0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
-    0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
-    0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
-    0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
-    0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
-    0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
-    0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
-    0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
-    0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
-    0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
-    0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
-    0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
-    0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
-    0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
-    0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
-    0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
-    0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
-    0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
-    0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
-    0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
-    0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
-    0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
-    0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
-    0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
-    0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
-    0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
-    0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
-    0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
-    0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
-    0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
-    0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
-    0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
-    0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
-    0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
-    0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
-    0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
-    0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
-    0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
-    0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
-    0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
-    0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
-    0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
-    0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
-    0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
-    0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
-    0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
-    0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
-    0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
-    0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
-    0xbe9834edUL
-  },
-  {
-    0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
-    0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
-    0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
-    0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
-    0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
-    0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
-    0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
-    0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
-    0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
-    0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
-    0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
-    0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
-    0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
-    0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
-    0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
-    0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
-    0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
-    0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
-    0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
-    0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
-    0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
-    0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
-    0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
-    0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
-    0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
-    0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
-    0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
-    0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
-    0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
-    0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
-    0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
-    0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
-    0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
-    0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
-    0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
-    0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
-    0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
-    0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
-    0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
-    0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
-    0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
-    0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
-    0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
-    0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
-    0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
-    0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
-    0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
-    0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
-    0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
-    0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
-    0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
-    0xde0506f1UL
-  },
-  {
-    0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
-    0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
-    0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
-    0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
-    0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
-    0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
-    0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
-    0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
-    0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
-    0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
-    0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
-    0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
-    0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
-    0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
-    0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
-    0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
-    0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
-    0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
-    0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
-    0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
-    0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
-    0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
-    0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
-    0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
-    0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
-    0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
-    0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
-    0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
-    0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
-    0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
-    0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
-    0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
-    0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
-    0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
-    0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
-    0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
-    0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
-    0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
-    0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
-    0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
-    0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
-    0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
-    0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
-    0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
-    0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
-    0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
-    0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
-    0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
-    0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
-    0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
-    0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
-    0x8def022dUL
-  },
-  {
-    0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
-    0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
-    0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
-    0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
-    0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
-    0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
-    0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
-    0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
-    0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
-    0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
-    0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
-    0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
-    0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
-    0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
-    0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
-    0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
-    0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
-    0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
-    0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
-    0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
-    0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
-    0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
-    0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
-    0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
-    0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
-    0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
-    0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
-    0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
-    0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
-    0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
-    0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
-    0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
-    0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
-    0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
-    0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
-    0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
-    0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
-    0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
-    0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
-    0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
-    0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
-    0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
-    0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
-    0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
-    0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
-    0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
-    0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
-    0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
-    0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
-    0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
-    0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
-    0x72fd2493UL
-  },
-  {
-    0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
-    0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
-    0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
-    0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
-    0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
-    0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
-    0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
-    0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
-    0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
-    0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
-    0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
-    0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
-    0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
-    0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
-    0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
-    0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
-    0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
-    0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
-    0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
-    0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
-    0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
-    0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
-    0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
-    0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
-    0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
-    0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
-    0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
-    0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
-    0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
-    0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
-    0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
-    0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
-    0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
-    0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
-    0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
-    0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
-    0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
-    0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
-    0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
-    0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
-    0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
-    0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
-    0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
-    0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
-    0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
-    0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
-    0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
-    0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
-    0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
-    0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
-    0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
-    0xed3498beUL
-  },
-  {
-    0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
-    0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
-    0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
-    0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
-    0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
-    0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
-    0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
-    0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
-    0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
-    0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
-    0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
-    0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
-    0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
-    0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
-    0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
-    0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
-    0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
-    0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
-    0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
-    0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
-    0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
-    0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
-    0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
-    0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
-    0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
-    0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
-    0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
-    0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
-    0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
-    0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
-    0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
-    0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
-    0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
-    0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
-    0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
-    0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
-    0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
-    0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
-    0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
-    0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
-    0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
-    0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
-    0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
-    0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
-    0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
-    0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
-    0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
-    0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
-    0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
-    0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
-    0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
-    0xf10605deUL
-#endif
-  }
-};
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/deflate.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1858 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process depends on being able to identify portions
- *      of the input text which are identical to earlier input (within a
- *      sliding window trailing behind the input currently being processed).
- *
- *      The most straightforward technique turns out to be the fastest for
- *      most input files: try all possible matches and select the longest.
- *      The key feature of this algorithm is that insertions into the string
- *      dictionary are very simple and thus fast, and deletions are avoided
- *      completely. Insertions are performed at each input character, whereas
- *      string matches are performed only when the previous match ends. So it
- *      is preferable to spend more time in matches to allow very fast string
- *      insertions and avoid deletions. The matching algorithm for small
- *      strings is inspired from that of Rabin & Karp. A brute force approach
- *      is used to find longer strings when a small match has been found.
- *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- *      (by Leonid Broukhis).
- *         A previous version of this file used a more sophisticated algorithm
- *      (by Fiala and Greene) which is guaranteed to run in linear amortized
- *      time, but has a larger average cost, uses more memory and is patented.
- *      However the F&G algorithm may be faster for some highly redundant
- *      files if the parameter max_chain_length (described below) is too large.
- *
- *  ACKNOWLEDGEMENTS
- *
- *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- *      I found it in 'freeze' written by Leonid Broukhis.
- *      Thanks to many people for bug reports and testing.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- *      Available in http://www.ietf.org/rfc/rfc1951.txt
- *
- *      A description of the Rabin and Karp algorithm is given in the book
- *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- *      Fiala,E.R., and Greene,D.H.
- *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-/* @(#) $Id$ */
-
-#include "deflate.h"
-
-const char deflate_copyright[] =
-   " deflate 1.2.5 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-/* ===========================================================================
- *  Function prototypes.
- */
-typedef enum {
-    need_more,      /* block not completed, need more input or more output */
-    block_done,     /* block flush performed */
-    finish_started, /* finish started, need only more output at next deflate */
-    finish_done     /* finish done, accept no more input or output */
-} block_state;
-
-typedef block_state (*compress_func) OF((deflate_state *s, int flush));
-/* Compression function. Returns the block state after the call. */
-
-local void fill_window    OF((deflate_state *s));
-local block_state deflate_stored OF((deflate_state *s, int flush));
-local block_state deflate_fast   OF((deflate_state *s, int flush));
-#ifndef FASTEST
-local block_state deflate_slow   OF((deflate_state *s, int flush));
-#endif
-local block_state deflate_rle    OF((deflate_state *s, int flush));
-local block_state deflate_huff   OF((deflate_state *s, int flush));
-local void lm_init        OF((deflate_state *s));
-local void putShortMSB    OF((deflate_state *s, uInt b));
-local void flush_pending  OF((z_streamp strm));
-local int read_buf        OF((z_streamp strm, Bytef *buf, unsigned size));
-#ifdef ASMV
-      void match_init OF((void)); /* asm code initialization */
-      uInt longest_match  OF((deflate_state *s, IPos cur_match));
-#else
-local uInt longest_match  OF((deflate_state *s, IPos cur_match));
-#endif
-
-#ifdef DEBUG
-local  void check_match OF((deflate_state *s, IPos start, IPos match,
-                            int length));
-#endif
-
-/* ===========================================================================
- * Local data
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-#  define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-typedef struct config_s {
-   ush good_length; /* reduce lazy search above this match length */
-   ush max_lazy;    /* do not perform lazy search above this match length */
-   ush nice_length; /* quit search above this match length */
-   ush max_chain;
-   compress_func func;
-} config;
-
-#ifdef FASTEST
-local const config configuration_table[2] = {
-/*      good lazy nice chain */
-/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
-/* 1 */ {4,    4,  8,    4, deflate_fast}}; /* max speed, no lazy matches */
-#else
-local const config configuration_table[10] = {
-/*      good lazy nice chain */
-/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
-/* 1 */ {4,    4,  8,    4, deflate_fast}, /* max speed, no lazy matches */
-/* 2 */ {4,    5, 16,    8, deflate_fast},
-/* 3 */ {4,    6, 32,   32, deflate_fast},
-
-/* 4 */ {4,    4, 16,   16, deflate_slow},  /* lazy matches */
-/* 5 */ {8,   16, 32,   32, deflate_slow},
-/* 6 */ {8,   16, 128, 128, deflate_slow},
-/* 7 */ {8,   32, 128, 256, deflate_slow},
-/* 8 */ {32, 128, 258, 1024, deflate_slow},
-/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */
-#endif
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-#ifndef NO_DUMMY_DECL
-struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
-#endif
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
- *    input characters, so that a running hash key can be computed from the
- *    previous key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * If this file is compiled with -DFASTEST, the compression level is forced
- * to 1, and no hash chains are maintained.
- * IN  assertion: all calls to to INSERT_STRING are made with consecutive
- *    input characters and the first MIN_MATCH bytes of str are valid
- *    (except for the last MIN_MATCH-1 bytes of the input file).
- */
-#ifdef FASTEST
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    match_head = s->head[s->ins_h], \
-    s->head[s->ins_h] = (Pos)(str))
-#else
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
-    s->head[s->ins_h] = (Pos)(str))
-#endif
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
-    s->head[s->hash_size-1] = NIL; \
-    zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ========================================================================= */
-int ZEXPORT deflateInit_(strm, level, version, stream_size)
-    z_streamp strm;
-    int level;
-    const char *version;
-    int stream_size;
-{
-    return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
-                         Z_DEFAULT_STRATEGY, version, stream_size);
-    /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
-                  version, stream_size)
-    z_streamp strm;
-    int  level;
-    int  method;
-    int  windowBits;
-    int  memLevel;
-    int  strategy;
-    const char *version;
-    int stream_size;
-{
-    deflate_state *s;
-    int wrap = 1;
-    static const char my_version[] = ZLIB_VERSION;
-
-    ushf *overlay;
-    /* We overlay pending_buf and d_buf+l_buf. This works since the average
-     * output size for (length,distance) codes is <= 24 bits.
-     */
-
-    if (version == Z_NULL || version[0] != my_version[0] ||
-        stream_size != sizeof(z_stream)) {
-        return Z_VERSION_ERROR;
-    }
-    if (strm == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->msg = Z_NULL;
-    if (strm->zalloc == (alloc_func)0) {
-        strm->zalloc = zcalloc;
-        strm->opaque = (voidpf)0;
-    }
-    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
-
-#ifdef FASTEST
-    if (level != 0) level = 1;
-#else
-    if (level == Z_DEFAULT_COMPRESSION) level = 6;
-#endif
-
-    if (windowBits < 0) { /* suppress zlib wrapper */
-        wrap = 0;
-        windowBits = -windowBits;
-    }
-#ifdef GZIP
-    else if (windowBits > 15) {
-        wrap = 2;       /* write gzip wrapper instead */
-        windowBits -= 16;
-    }
-#endif
-    if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
-        windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
-        strategy < 0 || strategy > Z_FIXED) {
-        return Z_STREAM_ERROR;
-    }
-    if (windowBits == 8) windowBits = 9;  /* until 256-byte window bug fixed */
-    s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
-    if (s == Z_NULL) return Z_MEM_ERROR;
-    strm->state = (struct internal_state FAR *)s;
-    s->strm = strm;
-
-    s->wrap = wrap;
-    s->gzhead = Z_NULL;
-    s->w_bits = windowBits;
-    s->w_size = 1 << s->w_bits;
-    s->w_mask = s->w_size - 1;
-
-    s->hash_bits = memLevel + 7;
-    s->hash_size = 1 << s->hash_bits;
-    s->hash_mask = s->hash_size - 1;
-    s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
-    s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
-    s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
-    s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
-
-    s->high_water = 0;      /* nothing written to s->window yet */
-
-    s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
-    overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
-    s->pending_buf = (uchf *) overlay;
-    s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
-
-    if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
-        s->pending_buf == Z_NULL) {
-        s->status = FINISH_STATE;
-        strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
-        deflateEnd (strm);
-        return Z_MEM_ERROR;
-    }
-    s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
-    s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
-
-    s->level = level;
-    s->strategy = strategy;
-    s->method = (Byte)method;
-
-    return deflateReset(strm);
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
-    z_streamp strm;
-    const Bytef *dictionary;
-    uInt  dictLength;
-{
-    deflate_state *s;
-    uInt length = dictLength;
-    uInt n;
-    IPos hash_head = 0;
-
-    if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
-        strm->state->wrap == 2 ||
-        (strm->state->wrap == 1 && strm->state->status != INIT_STATE))
-        return Z_STREAM_ERROR;
-
-    s = strm->state;
-    if (s->wrap)
-        strm->adler = adler32(strm->adler, dictionary, dictLength);
-
-    if (length < MIN_MATCH) return Z_OK;
-    if (length > s->w_size) {
-        length = s->w_size;
-        dictionary += dictLength - length; /* use the tail of the dictionary */
-    }
-    zmemcpy(s->window, dictionary, length);
-    s->strstart = length;
-    s->block_start = (long)length;
-
-    /* Insert all strings in the hash table (except for the last two bytes).
-     * s->lookahead stays null, so s->ins_h will be recomputed at the next
-     * call of fill_window.
-     */
-    s->ins_h = s->window[0];
-    UPDATE_HASH(s, s->ins_h, s->window[1]);
-    for (n = 0; n <= length - MIN_MATCH; n++) {
-        INSERT_STRING(s, n, hash_head);
-    }
-    if (hash_head) hash_head = 0;  /* to make compiler happy */
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateReset (strm)
-    z_streamp strm;
-{
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) {
-        return Z_STREAM_ERROR;
-    }
-
-    strm->total_in = strm->total_out = 0;
-    strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
-    strm->data_type = Z_UNKNOWN;
-
-    s = (deflate_state *)strm->state;
-    s->pending = 0;
-    s->pending_out = s->pending_buf;
-
-    if (s->wrap < 0) {
-        s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */
-    }
-    s->status = s->wrap ? INIT_STATE : BUSY_STATE;
-    strm->adler =
-#ifdef GZIP
-        s->wrap == 2 ? crc32(0L, Z_NULL, 0) :
-#endif
-        adler32(0L, Z_NULL, 0);
-    s->last_flush = Z_NO_FLUSH;
-
-    _tr_init(s);
-    lm_init(s);
-
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateSetHeader (strm, head)
-    z_streamp strm;
-    gz_headerp head;
-{
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    if (strm->state->wrap != 2) return Z_STREAM_ERROR;
-    strm->state->gzhead = head;
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflatePrime (strm, bits, value)
-    z_streamp strm;
-    int bits;
-    int value;
-{
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    strm->state->bi_valid = bits;
-    strm->state->bi_buf = (ush)(value & ((1 << bits) - 1));
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateParams(strm, level, strategy)
-    z_streamp strm;
-    int level;
-    int strategy;
-{
-    deflate_state *s;
-    compress_func func;
-    int err = Z_OK;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    s = strm->state;
-
-#ifdef FASTEST
-    if (level != 0) level = 1;
-#else
-    if (level == Z_DEFAULT_COMPRESSION) level = 6;
-#endif
-    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
-        return Z_STREAM_ERROR;
-    }
-    func = configuration_table[s->level].func;
-
-    if ((strategy != s->strategy || func != configuration_table[level].func) &&
-        strm->total_in != 0) {
-        /* Flush the last buffer: */
-        err = deflate(strm, Z_BLOCK);
-    }
-    if (s->level != level) {
-        s->level = level;
-        s->max_lazy_match   = configuration_table[level].max_lazy;
-        s->good_match       = configuration_table[level].good_length;
-        s->nice_match       = configuration_table[level].nice_length;
-        s->max_chain_length = configuration_table[level].max_chain;
-    }
-    s->strategy = strategy;
-    return err;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
-    z_streamp strm;
-    int good_length;
-    int max_lazy;
-    int nice_length;
-    int max_chain;
-{
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    s = strm->state;
-    s->good_match = good_length;
-    s->max_lazy_match = max_lazy;
-    s->nice_match = nice_length;
-    s->max_chain_length = max_chain;
-    return Z_OK;
-}
-
-/* =========================================================================
- * For the default windowBits of 15 and memLevel of 8, this function returns
- * a close to exact, as well as small, upper bound on the compressed size.
- * They are coded as constants here for a reason--if the #define's are
- * changed, then this function needs to be changed as well.  The return
- * value for 15 and 8 only works for those exact settings.
- *
- * For any setting other than those defaults for windowBits and memLevel,
- * the value returned is a conservative worst case for the maximum expansion
- * resulting from using fixed blocks instead of stored blocks, which deflate
- * can emit on compressed data for some combinations of the parameters.
- *
- * This function could be more sophisticated to provide closer upper bounds for
- * every combination of windowBits and memLevel.  But even the conservative
- * upper bound of about 14% expansion does not seem onerous for output buffer
- * allocation.
- */
-uLong ZEXPORT deflateBound(strm, sourceLen)
-    z_streamp strm;
-    uLong sourceLen;
-{
-    deflate_state *s;
-    uLong complen, wraplen;
-    Bytef *str;
-
-    /* conservative upper bound for compressed data */
-    complen = sourceLen +
-              ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5;
-
-    /* if can't get parameters, return conservative bound plus zlib wrapper */
-    if (strm == Z_NULL || strm->state == Z_NULL)
-        return complen + 6;
-
-    /* compute wrapper length */
-    s = strm->state;
-    switch (s->wrap) {
-    case 0:                                 /* raw deflate */
-        wraplen = 0;
-        break;
-    case 1:                                 /* zlib wrapper */
-        wraplen = 6 + (s->strstart ? 4 : 0);
-        break;
-    case 2:                                 /* gzip wrapper */
-        wraplen = 18;
-        if (s->gzhead != Z_NULL) {          /* user-supplied gzip header */
-            if (s->gzhead->extra != Z_NULL)
-                wraplen += 2 + s->gzhead->extra_len;
-            str = s->gzhead->name;
-            if (str != Z_NULL)
-                do {
-                    wraplen++;
-                } while (*str++);
-            str = s->gzhead->comment;
-            if (str != Z_NULL)
-                do {
-                    wraplen++;
-                } while (*str++);
-            if (s->gzhead->hcrc)
-                wraplen += 2;
-        }
-        break;
-    default:                                /* for compiler happiness */
-        wraplen = 6;
-    }
-
-    /* if not default parameters, return conservative bound */
-    if (s->w_bits != 15 || s->hash_bits != 8 + 7)
-        return complen + wraplen;
-
-    /* default settings: return tight bound for that case */
-    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
-           (sourceLen >> 25) + 13 - 6 + wraplen;
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
-    deflate_state *s;
-    uInt b;
-{
-    put_byte(s, (Byte)(b >> 8));
-    put_byte(s, (Byte)(b & 0xff));
-}
-
-/* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
- */
-local void flush_pending(strm)
-    z_streamp strm;
-{
-    unsigned len = strm->state->pending;
-
-    if (len > strm->avail_out) len = strm->avail_out;
-    if (len == 0) return;
-
-    zmemcpy(strm->next_out, strm->state->pending_out, len);
-    strm->next_out  += len;
-    strm->state->pending_out  += len;
-    strm->total_out += len;
-    strm->avail_out  -= len;
-    strm->state->pending -= len;
-    if (strm->state->pending == 0) {
-        strm->state->pending_out = strm->state->pending_buf;
-    }
-}
-
-/* ========================================================================= */
-int ZEXPORT deflate (strm, flush)
-    z_streamp strm;
-    int flush;
-{
-    int old_flush; /* value of flush param for previous deflate call */
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        flush > Z_BLOCK || flush < 0) {
-        return Z_STREAM_ERROR;
-    }
-    s = strm->state;
-
-    if (strm->next_out == Z_NULL ||
-        (strm->next_in == Z_NULL && strm->avail_in != 0) ||
-        (s->status == FINISH_STATE && flush != Z_FINISH)) {
-        ERR_RETURN(strm, Z_STREAM_ERROR);
-    }
-    if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
-    s->strm = strm; /* just in case */
-    old_flush = s->last_flush;
-    s->last_flush = flush;
-
-    /* Write the header */
-    if (s->status == INIT_STATE) {
-#ifdef GZIP
-        if (s->wrap == 2) {
-            strm->adler = crc32(0L, Z_NULL, 0);
-            put_byte(s, 31);
-            put_byte(s, 139);
-            put_byte(s, 8);
-            if (s->gzhead == Z_NULL) {
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, s->level == 9 ? 2 :
-                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
-                             4 : 0));
-                put_byte(s, OS_CODE);
-                s->status = BUSY_STATE;
-            }
-            else {
-                put_byte(s, (s->gzhead->text ? 1 : 0) +
-                            (s->gzhead->hcrc ? 2 : 0) +
-                            (s->gzhead->extra == Z_NULL ? 0 : 4) +
-                            (s->gzhead->name == Z_NULL ? 0 : 8) +
-                            (s->gzhead->comment == Z_NULL ? 0 : 16)
-                        );
-                put_byte(s, (Byte)(s->gzhead->time & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
-                put_byte(s, s->level == 9 ? 2 :
-                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
-                             4 : 0));
-                put_byte(s, s->gzhead->os & 0xff);
-                if (s->gzhead->extra != Z_NULL) {
-                    put_byte(s, s->gzhead->extra_len & 0xff);
-                    put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
-                }
-                if (s->gzhead->hcrc)
-                    strm->adler = crc32(strm->adler, s->pending_buf,
-                                        s->pending);
-                s->gzindex = 0;
-                s->status = EXTRA_STATE;
-            }
-        }
-        else
-#endif
-        {
-            uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
-            uInt level_flags;
-
-            if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
-                level_flags = 0;
-            else if (s->level < 6)
-                level_flags = 1;
-            else if (s->level == 6)
-                level_flags = 2;
-            else
-                level_flags = 3;
-            header |= (level_flags << 6);
-            if (s->strstart != 0) header |= PRESET_DICT;
-            header += 31 - (header % 31);
-
-            s->status = BUSY_STATE;
-            putShortMSB(s, header);
-
-            /* Save the adler32 of the preset dictionary: */
-            if (s->strstart != 0) {
-                putShortMSB(s, (uInt)(strm->adler >> 16));
-                putShortMSB(s, (uInt)(strm->adler & 0xffff));
-            }
-            strm->adler = adler32(0L, Z_NULL, 0);
-        }
-    }
-#ifdef GZIP
-    if (s->status == EXTRA_STATE) {
-        if (s->gzhead->extra != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
-
-            while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
-                if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
-                    flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size)
-                        break;
-                }
-                put_byte(s, s->gzhead->extra[s->gzindex]);
-                s->gzindex++;
-            }
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (s->gzindex == s->gzhead->extra_len) {
-                s->gzindex = 0;
-                s->status = NAME_STATE;
-            }
-        }
-        else
-            s->status = NAME_STATE;
-    }
-    if (s->status == NAME_STATE) {
-        if (s->gzhead->name != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
-            int val;
-
-            do {
-                if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
-                    flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size) {
-                        val = 1;
-                        break;
-                    }
-                }
-                val = s->gzhead->name[s->gzindex++];
-                put_byte(s, val);
-            } while (val != 0);
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (val == 0) {
-                s->gzindex = 0;
-                s->status = COMMENT_STATE;
-            }
-        }
-        else
-            s->status = COMMENT_STATE;
-    }
-    if (s->status == COMMENT_STATE) {
-        if (s->gzhead->comment != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
-            int val;
-
-            do {
-                if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
-                    flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size) {
-                        val = 1;
-                        break;
-                    }
-                }
-                val = s->gzhead->comment[s->gzindex++];
-                put_byte(s, val);
-            } while (val != 0);
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (val == 0)
-                s->status = HCRC_STATE;
-        }
-        else
-            s->status = HCRC_STATE;
-    }
-    if (s->status == HCRC_STATE) {
-        if (s->gzhead->hcrc) {
-            if (s->pending + 2 > s->pending_buf_size)
-                flush_pending(strm);
-            if (s->pending + 2 <= s->pending_buf_size) {
-                put_byte(s, (Byte)(strm->adler & 0xff));
-                put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
-                strm->adler = crc32(0L, Z_NULL, 0);
-                s->status = BUSY_STATE;
-            }
-        }
-        else
-            s->status = BUSY_STATE;
-    }
-#endif
-
-    /* Flush as much pending output as possible */
-    if (s->pending != 0) {
-        flush_pending(strm);
-        if (strm->avail_out == 0) {
-            /* Since avail_out is 0, deflate will be called again with
-             * more output space, but possibly with both pending and
-             * avail_in equal to zero. There won't be anything to do,
-             * but this is not an error situation so make sure we
-             * return OK instead of BUF_ERROR at next call of deflate:
-             */
-            s->last_flush = -1;
-            return Z_OK;
-        }
-
-    /* Make sure there is something to do and avoid duplicate consecutive
-     * flushes. For repeated and useless calls with Z_FINISH, we keep
-     * returning Z_STREAM_END instead of Z_BUF_ERROR.
-     */
-    } else if (strm->avail_in == 0 && flush <= old_flush &&
-               flush != Z_FINISH) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* User must not provide more input after the first FINISH: */
-    if (s->status == FINISH_STATE && strm->avail_in != 0) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* Start a new block or continue the current one.
-     */
-    if (strm->avail_in != 0 || s->lookahead != 0 ||
-        (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
-        block_state bstate;
-
-        bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
-                    (s->strategy == Z_RLE ? deflate_rle(s, flush) :
-                        (*(configuration_table[s->level].func))(s, flush));
-
-        if (bstate == finish_started || bstate == finish_done) {
-            s->status = FINISH_STATE;
-        }
-        if (bstate == need_more || bstate == finish_started) {
-            if (strm->avail_out == 0) {
-                s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
-            }
-            return Z_OK;
-            /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
-             * of deflate should use the same flush parameter to make sure
-             * that the flush is complete. So we don't have to output an
-             * empty block here, this will be done at next call. This also
-             * ensures that for a very small output buffer, we emit at most
-             * one empty block.
-             */
-        }
-        if (bstate == block_done) {
-            if (flush == Z_PARTIAL_FLUSH) {
-                _tr_align(s);
-            } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */
-                _tr_stored_block(s, (char*)0, 0L, 0);
-                /* For a full flush, this empty block will be recognized
-                 * as a special marker by inflate_sync().
-                 */
-                if (flush == Z_FULL_FLUSH) {
-                    CLEAR_HASH(s);             /* forget history */
-                    if (s->lookahead == 0) {
-                        s->strstart = 0;
-                        s->block_start = 0L;
-                    }
-                }
-            }
-            flush_pending(strm);
-            if (strm->avail_out == 0) {
-              s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
-              return Z_OK;
-            }
-        }
-    }
-    Assert(strm->avail_out > 0, "bug2");
-
-    if (flush != Z_FINISH) return Z_OK;
-    if (s->wrap <= 0) return Z_STREAM_END;
-
-    /* Write the trailer */
-#ifdef GZIP
-    if (s->wrap == 2) {
-        put_byte(s, (Byte)(strm->adler & 0xff));
-        put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
-        put_byte(s, (Byte)((strm->adler >> 16) & 0xff));
-        put_byte(s, (Byte)((strm->adler >> 24) & 0xff));
-        put_byte(s, (Byte)(strm->total_in & 0xff));
-        put_byte(s, (Byte)((strm->total_in >> 8) & 0xff));
-        put_byte(s, (Byte)((strm->total_in >> 16) & 0xff));
-        put_byte(s, (Byte)((strm->total_in >> 24) & 0xff));
-    }
-    else
-#endif
-    {
-        putShortMSB(s, (uInt)(strm->adler >> 16));
-        putShortMSB(s, (uInt)(strm->adler & 0xffff));
-    }
-    flush_pending(strm);
-    /* If avail_out is zero, the application will call deflate again
-     * to flush the rest.
-     */
-    if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */
-    return s->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateEnd (strm)
-    z_streamp strm;
-{
-    int status;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-
-    status = strm->state->status;
-    if (status != INIT_STATE &&
-        status != EXTRA_STATE &&
-        status != NAME_STATE &&
-        status != COMMENT_STATE &&
-        status != HCRC_STATE &&
-        status != BUSY_STATE &&
-        status != FINISH_STATE) {
-      return Z_STREAM_ERROR;
-    }
-
-    /* Deallocate in reverse order of allocations: */
-    TRY_FREE(strm, strm->state->pending_buf);
-    TRY_FREE(strm, strm->state->head);
-    TRY_FREE(strm, strm->state->prev);
-    TRY_FREE(strm, strm->state->window);
-
-    ZFREE(strm, strm->state);
-    strm->state = Z_NULL;
-
-    return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
-}
-
-/* =========================================================================
- * Copy the source state to the destination state.
- * To simplify the source, this is not supported for 16-bit MSDOS (which
- * doesn't have enough memory anyway to duplicate compression states).
- */
-int ZEXPORT deflateCopy (dest, source)
-    z_streamp dest;
-    z_streamp source;
-{
-#ifdef MAXSEG_64K
-    return Z_STREAM_ERROR;
-#else
-    deflate_state *ds;
-    deflate_state *ss;
-    ushf *overlay;
-
-
-    if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
-        return Z_STREAM_ERROR;
-    }
-
-    ss = source->state;
-
-    zmemcpy(dest, source, sizeof(z_stream));
-
-    ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
-    if (ds == Z_NULL) return Z_MEM_ERROR;
-    dest->state = (struct internal_state FAR *) ds;
-    zmemcpy(ds, ss, sizeof(deflate_state));
-    ds->strm = dest;
-
-    ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
-    ds->prev   = (Posf *)  ZALLOC(dest, ds->w_size, sizeof(Pos));
-    ds->head   = (Posf *)  ZALLOC(dest, ds->hash_size, sizeof(Pos));
-    overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
-    ds->pending_buf = (uchf *) overlay;
-
-    if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
-        ds->pending_buf == Z_NULL) {
-        deflateEnd (dest);
-        return Z_MEM_ERROR;
-    }
-    /* following zmemcpy do not work for 16-bit MSDOS */
-    zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
-    zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
-    zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
-    zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
-
-    ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
-    ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
-    ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
-
-    ds->l_desc.dyn_tree = ds->dyn_ltree;
-    ds->d_desc.dyn_tree = ds->dyn_dtree;
-    ds->bl_desc.dyn_tree = ds->bl_tree;
-
-    return Z_OK;
-#endif /* MAXSEG_64K */
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read.  All deflate() input goes through
- * this function so some applications may wish to modify it to avoid
- * allocating a large strm->next_in buffer and copying from it.
- * (See also flush_pending()).
- */
-local int read_buf(strm, buf, size)
-    z_streamp strm;
-    Bytef *buf;
-    unsigned size;
-{
-    unsigned len = strm->avail_in;
-
-    if (len > size) len = size;
-    if (len == 0) return 0;
-
-    strm->avail_in  -= len;
-
-    if (strm->state->wrap == 1) {
-        strm->adler = adler32(strm->adler, strm->next_in, len);
-    }
-#ifdef GZIP
-    else if (strm->state->wrap == 2) {
-        strm->adler = crc32(strm->adler, strm->next_in, len);
-    }
-#endif
-    zmemcpy(buf, strm->next_in, len);
-    strm->next_in  += len;
-    strm->total_in += len;
-
-    return (int)len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
-    deflate_state *s;
-{
-    s->window_size = (ulg)2L*s->w_size;
-
-    CLEAR_HASH(s);
-
-    /* Set the default configuration parameters:
-     */
-    s->max_lazy_match   = configuration_table[s->level].max_lazy;
-    s->good_match       = configuration_table[s->level].good_length;
-    s->nice_match       = configuration_table[s->level].nice_length;
-    s->max_chain_length = configuration_table[s->level].max_chain;
-
-    s->strstart = 0;
-    s->block_start = 0L;
-    s->lookahead = 0;
-    s->match_length = s->prev_length = MIN_MATCH-1;
-    s->match_available = 0;
-    s->ins_h = 0;
-#ifndef FASTEST
-#ifdef ASMV
-    match_init(); /* initialize the asm code */
-#endif
-#endif
-}
-
-#ifndef FASTEST
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- * OUT assertion: the match length is not greater than s->lookahead.
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-local uInt longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    int nice_match = s->nice_match;             /* stop if match long enough */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    /* Do not look for matches beyond the end of the input. This is necessary
-     * to make deflate deterministic.
-     */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2.  Note that the checks below
-         * for insufficient lookahead only occur occasionally for performance
-         * reasons.  Therefore uninitialized memory will be accessed, and
-         * conditional jumps will be made that depend on those values.
-         * However the length of the match is limited to the lookahead, so
-         * the output of deflate is not affected by the uninitialized values.
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
-    return s->lookahead;
-}
-#endif /* ASMV */
-
-#else /* FASTEST */
-
-/* ---------------------------------------------------------------------------
- * Optimized version for FASTEST only
- */
-local uInt longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    Assert(cur_match < s->strstart, "no future");
-
-    match = s->window + cur_match;
-
-    /* Return failure if the match length is less than 2:
-     */
-    if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
-
-    /* The check at best_len-1 can be removed because it will be made
-     * again later. (This heuristic is not always a win.)
-     * It is not necessary to compare scan[2] and match[2] since they
-     * are always equal when the other bytes match, given that
-     * the hash keys are equal and that HASH_BITS >= 8.
-     */
-    scan += 2, match += 2;
-    Assert(*scan == *match, "match[2]?");
-
-    /* We check for insufficient lookahead only every 8th comparison;
-     * the 256th check will be made at strstart+258.
-     */
-    do {
-    } while (*++scan == *++match && *++scan == *++match &&
-             *++scan == *++match && *++scan == *++match &&
-             *++scan == *++match && *++scan == *++match &&
-             *++scan == *++match && *++scan == *++match &&
-             scan < strend);
-
-    Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-    len = MAX_MATCH - (int)(strend - scan);
-
-    if (len < MIN_MATCH) return MIN_MATCH - 1;
-
-    s->match_start = cur_match;
-    return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead;
-}
-
-#endif /* FASTEST */
-
-#ifdef DEBUG
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
-    deflate_state *s;
-    IPos start, match;
-    int length;
-{
-    /* check that the match is indeed a match */
-    if (zmemcmp(s->window + match,
-                s->window + start, length) != EQUAL) {
-        fprintf(stderr, " start %u, match %u, length %d\n",
-                start, match, length);
-        do {
-            fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
-        } while (--length != 0);
-        z_error("invalid match");
-    }
-    if (z_verbose > 1) {
-        fprintf(stderr,"\\[%d,%d]", start-match, length);
-        do { putc(s->window[start++], stderr); } while (--length != 0);
-    }
-}
-#else
-#  define check_match(s, start, match, length)
-#endif /* DEBUG */
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- *    At least one byte has been read, or avail_in == 0; reads are
- *    performed for at least two bytes (required for the zip translate_eol
- *    option -- not supported here).
- */
-local void fill_window(s)
-    deflate_state *s;
-{
-    register unsigned n, m;
-    register Posf *p;
-    unsigned more;    /* Amount of free space at the end of the window. */
-    uInt wsize = s->w_size;
-
-    do {
-        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
-        /* Deal with !@#$% 64K limit: */
-        if (sizeof(int) <= 2) {
-            if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
-                more = wsize;
-
-            } else if (more == (unsigned)(-1)) {
-                /* Very unlikely, but possible on 16 bit machine if
-                 * strstart == 0 && lookahead == 1 (input done a byte at time)
-                 */
-                more--;
-            }
-        }
-
-        /* If the window is almost full and there is insufficient lookahead,
-         * move the upper half to the lower one to make room in the upper half.
-         */
-        if (s->strstart >= wsize+MAX_DIST(s)) {
-
-            zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
-            s->match_start -= wsize;
-            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
-            s->block_start -= (long) wsize;
-
-            /* Slide the hash table (could be avoided with 32 bit values
-               at the expense of memory usage). We slide even when level == 0
-               to keep the hash table consistent if we switch back to level > 0
-               later. (Using level 0 permanently is not an optimal usage of
-               zlib, so we don't care about this pathological case.)
-             */
-            n = s->hash_size;
-            p = &s->head[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-            } while (--n);
-
-            n = wsize;
-#ifndef FASTEST
-            p = &s->prev[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-                /* If n is not on any hash chain, prev[n] is garbage but
-                 * its value will never be used.
-                 */
-            } while (--n);
-#endif
-            more += wsize;
-        }
-        if (s->strm->avail_in == 0) return;
-
-        /* If there was no sliding:
-         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
-         *    more == window_size - lookahead - strstart
-         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
-         * => more >= window_size - 2*WSIZE + 2
-         * In the BIG_MEM or MMAP case (not yet supported),
-         *   window_size == input_size + MIN_LOOKAHEAD  &&
-         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
-         * Otherwise, window_size == 2*WSIZE so more >= 2.
-         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
-         */
-        Assert(more >= 2, "more < 2");
-
-        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
-        s->lookahead += n;
-
-        /* Initialize the hash value now that we have some input: */
-        if (s->lookahead >= MIN_MATCH) {
-            s->ins_h = s->window[s->strstart];
-            UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-            Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-        }
-        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
-         * but this is not important since only literal bytes will be emitted.
-         */
-
-    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-
-    /* If the WIN_INIT bytes after the end of the current data have never been
-     * written, then zero those bytes in order to avoid memory check reports of
-     * the use of uninitialized (or uninitialised as Julian writes) bytes by
-     * the longest match routines.  Update the high water mark for the next
-     * time through here.  WIN_INIT is set to MAX_MATCH since the longest match
-     * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
-     */
-    if (s->high_water < s->window_size) {
-        ulg curr = s->strstart + (ulg)(s->lookahead);
-        ulg init;
-
-        if (s->high_water < curr) {
-            /* Previous high water mark below current data -- zero WIN_INIT
-             * bytes or up to end of window, whichever is less.
-             */
-            init = s->window_size - curr;
-            if (init > WIN_INIT)
-                init = WIN_INIT;
-            zmemzero(s->window + curr, (unsigned)init);
-            s->high_water = curr + init;
-        }
-        else if (s->high_water < (ulg)curr + WIN_INIT) {
-            /* High water mark at or above current data, but below current data
-             * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
-             * to end of window, whichever is less.
-             */
-            init = (ulg)curr + WIN_INIT - s->high_water;
-            if (init > s->window_size - s->high_water)
-                init = s->window_size - s->high_water;
-            zmemzero(s->window + s->high_water, (unsigned)init);
-            s->high_water += init;
-        }
-    }
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, last) { \
-   _tr_flush_block(s, (s->block_start >= 0L ? \
-                   (charf *)&s->window[(unsigned)s->block_start] : \
-                   (charf *)Z_NULL), \
-                (ulg)((long)s->strstart - s->block_start), \
-                (last)); \
-   s->block_start = s->strstart; \
-   flush_pending(s->strm); \
-   Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, last) { \
-   FLUSH_BLOCK_ONLY(s, last); \
-   if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \
-}
-
-/* ===========================================================================
- * Copy without compression as much as possible from the input stream, return
- * the current block state.
- * This function does not insert new strings in the dictionary since
- * uncompressible data is probably not useful. This function is used
- * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying from
- * window to pending_buf.
- */
-local block_state deflate_stored(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
-     * to pending_buf_size, and each stored block has a 5 byte header:
-     */
-    ulg max_block_size = 0xffff;
-    ulg max_start;
-
-    if (max_block_size > s->pending_buf_size - 5) {
-        max_block_size = s->pending_buf_size - 5;
-    }
-
-    /* Copy as much as possible from input to output: */
-    for (;;) {
-        /* Fill the window as much as possible: */
-        if (s->lookahead <= 1) {
-
-            Assert(s->strstart < s->w_size+MAX_DIST(s) ||
-                   s->block_start >= (long)s->w_size, "slide too late");
-
-            fill_window(s);
-            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
-
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-        Assert(s->block_start >= 0L, "block gone");
-
-        s->strstart += s->lookahead;
-        s->lookahead = 0;
-
-        /* Emit a stored block if pending_buf will be full: */
-        max_start = s->block_start + max_block_size;
-        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
-            /* strstart == 0 is possible when wraparound on 16-bit machine */
-            s->lookahead = (uInt)(s->strstart - max_start);
-            s->strstart = (uInt)max_start;
-            FLUSH_BLOCK(s, 0);
-        }
-        /* Flush if we may have to slide, otherwise block_start may become
-         * negative and the data will be gone:
-         */
-        if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
-            FLUSH_BLOCK(s, 0);
-        }
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return the current
- * block state.
- * This function does not perform lazy evaluation of matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local block_state deflate_fast(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head;       /* head of the hash chain */
-    int bflush;           /* set if current block must be flushed */
-
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-                return need_more;
-            }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        hash_head = NIL;
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         * At this point we have always match_length < MIN_MATCH
-         */
-        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            s->match_length = longest_match (s, hash_head);
-            /* longest_match() sets match_start */
-        }
-        if (s->match_length >= MIN_MATCH) {
-            check_match(s, s->strstart, s->match_start, s->match_length);
-
-            _tr_tally_dist(s, s->strstart - s->match_start,
-                           s->match_length - MIN_MATCH, bflush);
-
-            s->lookahead -= s->match_length;
-
-            /* Insert new strings in the hash table only if the match length
-             * is not too large. This saves time but degrades compression.
-             */
-#ifndef FASTEST
-            if (s->match_length <= s->max_insert_length &&
-                s->lookahead >= MIN_MATCH) {
-                s->match_length--; /* string at strstart already in table */
-                do {
-                    s->strstart++;
-                    INSERT_STRING(s, s->strstart, hash_head);
-                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
-                     * always MIN_MATCH bytes ahead.
-                     */
-                } while (--s->match_length != 0);
-                s->strstart++;
-            } else
-#endif
-            {
-                s->strstart += s->match_length;
-                s->match_length = 0;
-                s->ins_h = s->window[s->strstart];
-                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-                Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
-                 * matter since it will be recomputed at next deflate call.
-                 */
-            }
-        } else {
-            /* No match, output a literal byte */
-            Tracevv((stderr,"%c", s->window[s->strstart]));
-            _tr_tally_lit (s, s->window[s->strstart], bflush);
-            s->lookahead--;
-            s->strstart++;
-        }
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-
-#ifndef FASTEST
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local block_state deflate_slow(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head;          /* head of hash chain */
-    int bflush;              /* set if current block must be flushed */
-
-    /* Process the input block. */
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-                return need_more;
-            }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        hash_head = NIL;
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         */
-        s->prev_length = s->match_length, s->prev_match = s->match_start;
-        s->match_length = MIN_MATCH-1;
-
-        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
-            s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            s->match_length = longest_match (s, hash_head);
-            /* longest_match() sets match_start */
-
-            if (s->match_length <= 5 && (s->strategy == Z_FILTERED
-#if TOO_FAR <= 32767
-                || (s->match_length == MIN_MATCH &&
-                    s->strstart - s->match_start > TOO_FAR)
-#endif
-                )) {
-
-                /* If prev_match is also MIN_MATCH, match_start is garbage
-                 * but we will ignore the current match anyway.
-                 */
-                s->match_length = MIN_MATCH-1;
-            }
-        }
-        /* If there was a match at the previous step and the current
-         * match is not better, output the previous match:
-         */
-        if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
-            uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
-            /* Do not insert strings in hash table beyond this. */
-
-            check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
-            _tr_tally_dist(s, s->strstart -1 - s->prev_match,
-                           s->prev_length - MIN_MATCH, bflush);
-
-            /* Insert in hash table all strings up to the end of the match.
-             * strstart-1 and strstart are already inserted. If there is not
-             * enough lookahead, the last two strings are not inserted in
-             * the hash table.
-             */
-            s->lookahead -= s->prev_length-1;
-            s->prev_length -= 2;
-            do {
-                if (++s->strstart <= max_insert) {
-                    INSERT_STRING(s, s->strstart, hash_head);
-                }
-            } while (--s->prev_length != 0);
-            s->match_available = 0;
-            s->match_length = MIN_MATCH-1;
-            s->strstart++;
-
-            if (bflush) FLUSH_BLOCK(s, 0);
-
-        } else if (s->match_available) {
-            /* If there was no match at the previous position, output a
-             * single literal. If there was a match but the current match
-             * is longer, truncate the previous match to a single literal.
-             */
-            Tracevv((stderr,"%c", s->window[s->strstart-1]));
-            _tr_tally_lit(s, s->window[s->strstart-1], bflush);
-            if (bflush) {
-                FLUSH_BLOCK_ONLY(s, 0);
-            }
-            s->strstart++;
-            s->lookahead--;
-            if (s->strm->avail_out == 0) return need_more;
-        } else {
-            /* There is no previous match to compare with, wait for
-             * the next step to decide.
-             */
-            s->match_available = 1;
-            s->strstart++;
-            s->lookahead--;
-        }
-    }
-    Assert (flush != Z_NO_FLUSH, "no flush?");
-    if (s->match_available) {
-        Tracevv((stderr,"%c", s->window[s->strstart-1]));
-        _tr_tally_lit(s, s->window[s->strstart-1], bflush);
-        s->match_available = 0;
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-#endif /* FASTEST */
-
-/* ===========================================================================
- * For Z_RLE, simply look for runs of bytes, generate matches only of distance
- * one.  Do not maintain a hash table.  (It will be regenerated if this run of
- * deflate switches away from Z_RLE.)
- */
-local block_state deflate_rle(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    int bflush;             /* set if current block must be flushed */
-    uInt prev;              /* byte at distance one to match */
-    Bytef *scan, *strend;   /* scan goes up to strend for length of run */
-
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the longest encodable run.
-         */
-        if (s->lookahead < MAX_MATCH) {
-            fill_window(s);
-            if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) {
-                return need_more;
-            }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* See how many times the previous byte repeats */
-        s->match_length = 0;
-        if (s->lookahead >= MIN_MATCH && s->strstart > 0) {
-            scan = s->window + s->strstart - 1;
-            prev = *scan;
-            if (prev == *++scan && prev == *++scan && prev == *++scan) {
-                strend = s->window + s->strstart + MAX_MATCH;
-                do {
-                } while (prev == *++scan && prev == *++scan &&
-                         prev == *++scan && prev == *++scan &&
-                         prev == *++scan && prev == *++scan &&
-                         prev == *++scan && prev == *++scan &&
-                         scan < strend);
-                s->match_length = MAX_MATCH - (int)(strend - scan);
-                if (s->match_length > s->lookahead)
-                    s->match_length = s->lookahead;
-            }
-        }
-
-        /* Emit match if have run of MIN_MATCH or longer, else emit literal */
-        if (s->match_length >= MIN_MATCH) {
-            check_match(s, s->strstart, s->strstart - 1, s->match_length);
-
-            _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush);
-
-            s->lookahead -= s->match_length;
-            s->strstart += s->match_length;
-            s->match_length = 0;
-        } else {
-            /* No match, output a literal byte */
-            Tracevv((stderr,"%c", s->window[s->strstart]));
-            _tr_tally_lit (s, s->window[s->strstart], bflush);
-            s->lookahead--;
-            s->strstart++;
-        }
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * For Z_HUFFMAN_ONLY, do not look for matches.  Do not maintain a hash table.
- * (It will be regenerated if this run of deflate switches away from Huffman.)
- */
-local block_state deflate_huff(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    int bflush;             /* set if current block must be flushed */
-
-    for (;;) {
-        /* Make sure that we have a literal to write. */
-        if (s->lookahead == 0) {
-            fill_window(s);
-            if (s->lookahead == 0) {
-                if (flush == Z_NO_FLUSH)
-                    return need_more;
-                break;      /* flush the current block */
-            }
-        }
-
-        /* Output a literal byte */
-        s->match_length = 0;
-        Tracevv((stderr,"%c", s->window[s->strstart]));
-        _tr_tally_lit (s, s->window[s->strstart], bflush);
-        s->lookahead--;
-        s->strstart++;
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/deflate.h	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,366 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* deflate.h -- internal compression state
- * Copyright (C) 1995-2010 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* @(#) $Id$ */
-
-#ifndef DEFLATE_H
-#define DEFLATE_H
-
-#include "zutil.h"
-
-/* define NO_GZIP when compiling if you want to disable gzip header and
-   trailer creation by deflate().  NO_GZIP would be used to avoid linking in
-   the crc code when it is not needed.  For shared libraries, gzip encoding
-   should be left enabled. */
-#ifndef NO_GZIP
-#  define GZIP
-#endif
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS  256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES   30
-/* number of distance codes */
-
-#define BL_CODES  19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define INIT_STATE    42
-#define EXTRA_STATE   69
-#define NAME_STATE    73
-#define COMMENT_STATE 91
-#define HCRC_STATE   103
-#define BUSY_STATE   113
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
-    union {
-        ush  freq;       /* frequency count */
-        ush  code;       /* bit string */
-    } fc;
-    union {
-        ush  dad;        /* father node in Huffman tree */
-        ush  len;        /* length of bit string */
-    } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad  dl.dad
-#define Len  dl.len
-
-typedef struct static_tree_desc_s  static_tree_desc;
-
-typedef struct tree_desc_s {
-    ct_data *dyn_tree;           /* the dynamic tree */
-    int     max_code;            /* largest code with non zero frequency */
-    static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct internal_state {
-    z_streamp strm;      /* pointer back to this zlib stream */
-    int   status;        /* as the name implies */
-    Bytef *pending_buf;  /* output still pending */
-    ulg   pending_buf_size; /* size of pending_buf */
-    Bytef *pending_out;  /* next pending byte to output to the stream */
-    uInt   pending;      /* nb of bytes in the pending buffer */
-    int   wrap;          /* bit 0 true for zlib, bit 1 true for gzip */
-    gz_headerp  gzhead;  /* gzip header information to write */
-    uInt   gzindex;      /* where in extra, name, or comment */
-    Byte  method;        /* STORED (for zip only) or DEFLATED */
-    int   last_flush;    /* value of flush param for previous deflate call */
-
-                /* used by deflate.c: */
-
-    uInt  w_size;        /* LZ77 window size (32K by default) */
-    uInt  w_bits;        /* log2(w_size)  (8..16) */
-    uInt  w_mask;        /* w_size - 1 */
-
-    Bytef *window;
-    /* Sliding window. Input bytes are read into the second half of the window,
-     * and move to the first half later to keep a dictionary of at least wSize
-     * bytes. With this organization, matches are limited to a distance of
-     * wSize-MAX_MATCH bytes, but this ensures that IO is always
-     * performed with a length multiple of the block size. Also, it limits
-     * the window size to 64K, which is quite useful on MSDOS.
-     * To do: use the user input buffer as sliding window.
-     */
-
-    ulg window_size;
-    /* Actual size of window: 2*wSize, except when the user input buffer
-     * is directly used as sliding window.
-     */
-
-    Posf *prev;
-    /* Link to older string with same hash index. To limit the size of this
-     * array to 64K, this link is maintained only for the last 32K strings.
-     * An index in this array is thus a window index modulo 32K.
-     */
-
-    Posf *head; /* Heads of the hash chains or NIL. */
-
-    uInt  ins_h;          /* hash index of string to be inserted */
-    uInt  hash_size;      /* number of elements in hash table */
-    uInt  hash_bits;      /* log2(hash_size) */
-    uInt  hash_mask;      /* hash_size-1 */
-
-    uInt  hash_shift;
-    /* Number of bits by which ins_h must be shifted at each input
-     * step. It must be such that after MIN_MATCH steps, the oldest
-     * byte no longer takes part in the hash key, that is:
-     *   hash_shift * MIN_MATCH >= hash_bits
-     */
-
-    long block_start;
-    /* Window position at the beginning of the current output block. Gets
-     * negative when the window is moved backwards.
-     */
-
-    uInt match_length;           /* length of best match */
-    IPos prev_match;             /* previous match */
-    int match_available;         /* set if previous match exists */
-    uInt strstart;               /* start of string to insert */
-    uInt match_start;            /* start of matching string */
-    uInt lookahead;              /* number of valid bytes ahead in window */
-
-    uInt prev_length;
-    /* Length of the best match at previous step. Matches not greater than this
-     * are discarded. This is used in the lazy match evaluation.
-     */
-
-    uInt max_chain_length;
-    /* To speed up deflation, hash chains are never searched beyond this
-     * length.  A higher limit improves compression ratio but degrades the
-     * speed.
-     */
-
-    uInt max_lazy_match;
-    /* Attempt to find a better match only when the current match is strictly
-     * smaller than this value. This mechanism is used only for compression
-     * levels >= 4.
-     */
-#   define max_insert_length  max_lazy_match
-    /* Insert new strings in the hash table only if the match length is not
-     * greater than this length. This saves time but degrades compression.
-     * max_insert_length is used only for compression levels <= 3.
-     */
-
-    int level;    /* compression level (1..9) */
-    int strategy; /* favor or force Huffman coding*/
-
-    uInt good_match;
-    /* Use a faster search when the previous match is longer than this */
-
-    int nice_match; /* Stop searching when current match exceeds this */
-
-                /* used by trees.c: */
-    /* Didn't use ct_data typedef below to supress compiler warning */
-    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
-    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
-    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
-
-    struct tree_desc_s l_desc;               /* desc. for literal tree */
-    struct tree_desc_s d_desc;               /* desc. for distance tree */
-    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
-
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
-    int heap_len;               /* number of elements in the heap */
-    int heap_max;               /* element of largest frequency */
-    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
-     * The same heap array is used to build all trees.
-     */
-
-    uch depth[2*L_CODES+1];
-    /* Depth of each subtree used as tie breaker for trees of equal frequency
-     */
-
-    uchf *l_buf;          /* buffer for literals or lengths */
-
-    uInt  lit_bufsize;
-    /* Size of match buffer for literals/lengths.  There are 4 reasons for
-     * limiting lit_bufsize to 64K:
-     *   - frequencies can be kept in 16 bit counters
-     *   - if compression is not successful for the first block, all input
-     *     data is still in the window so we can still emit a stored block even
-     *     when input comes from standard input.  (This can also be done for
-     *     all blocks if lit_bufsize is not greater than 32K.)
-     *   - if compression is not successful for a file smaller than 64K, we can
-     *     even emit a stored file instead of a stored block (saving 5 bytes).
-     *     This is applicable only for zip (not gzip or zlib).
-     *   - creating new Huffman trees less frequently may not provide fast
-     *     adaptation to changes in the input data statistics. (Take for
-     *     example a binary file with poorly compressible code followed by
-     *     a highly compressible string table.) Smaller buffer sizes give
-     *     fast adaptation but have of course the overhead of transmitting
-     *     trees more frequently.
-     *   - I can't count above 4
-     */
-
-    uInt last_lit;      /* running index in l_buf */
-
-    ushf *d_buf;
-    /* Buffer for distances. To simplify the code, d_buf and l_buf have
-     * the same number of elements. To use different lengths, an extra flag
-     * array would be necessary.
-     */
-
-    ulg opt_len;        /* bit length of current block with optimal trees */
-    ulg static_len;     /* bit length of current block with static trees */
-    uInt matches;       /* number of string matches in current block */
-    int last_eob_len;   /* bit length of EOB code for last block */
-
-#ifdef DEBUG
-    ulg compressed_len; /* total bit length of compressed file mod 2^32 */
-    ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
-#endif
-
-    ush bi_buf;
-    /* Output buffer. bits are inserted starting at the bottom (least
-     * significant bits).
-     */
-    int bi_valid;
-    /* Number of valid bits in bi_buf.  All bits above the last valid bit
-     * are always zero.
-     */
-
-    ulg high_water;
-    /* High water mark offset in window for initialized bytes -- bytes above
-     * this are set to zero in order to avoid memory check warnings when
-     * longest match routines access bytes past the input.  This is then
-     * updated to the new high water mark.
-     */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
-#define WIN_INIT MAX_MATCH
-/* Number of bytes after end of data in window to initialize in order to avoid
-   memory checker errors from longest match routines */
-
-        /* in trees.c */
-void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
-int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
-void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
-void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
-void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
-
-#define d_code(dist) \
-   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. _dist_code[256] and _dist_code[257] are never
- * used.
- */
-
-#ifndef DEBUG
-/* Inline versions of _tr_tally for speed: */
-
-#if defined(GEN_TREES_H) || !defined(STDC)
-  extern uch ZLIB_INTERNAL _length_code[];
-  extern uch ZLIB_INTERNAL _dist_code[];
-#else
-  extern const uch ZLIB_INTERNAL _length_code[];
-  extern const uch ZLIB_INTERNAL _dist_code[];
-#endif
-
-# define _tr_tally_lit(s, c, flush) \
-  { uch cc = (c); \
-    s->d_buf[s->last_lit] = 0; \
-    s->l_buf[s->last_lit++] = cc; \
-    s->dyn_ltree[cc].Freq++; \
-    flush = (s->last_lit == s->lit_bufsize-1); \
-   }
-# define _tr_tally_dist(s, distance, length, flush) \
-  { uch len = (length); \
-    ush dist = (distance); \
-    s->d_buf[s->last_lit] = dist; \
-    s->l_buf[s->last_lit++] = len; \
-    dist--; \
-    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
-    s->dyn_dtree[d_code(dist)].Freq++; \
-    flush = (s->last_lit == s->lit_bufsize-1); \
-  }
-#else
-# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
-# define _tr_tally_dist(s, distance, length, flush) \
-              flush = _tr_tally(s, distance, length)
-#endif
-
-#endif /* DEFLATE_H */
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/gzclose.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* gzclose.c -- zlib gzclose() function
- * Copyright (C) 2004, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* gzclose() is in a separate file so that it is linked in only if it is used.
-   That way the other gzclose functions can be used instead to avoid linking in
-   unneeded compression or decompression routines. */
-int ZEXPORT gzclose(file)
-    gzFile file;
-{
-#ifndef NO_GZCOMPRESS
-    gz_statep state;
-
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-
-    return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file);
-#else
-    return gzclose_r(file);
-#endif
-}
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/gzguts.h	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,156 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* gzguts.h -- zlib internal header definitions for gz* operations
- * Copyright (C) 2004, 2005, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#ifdef _LARGEFILE64_SOURCE
-#  ifndef _LARGEFILE_SOURCE
-#    define _LARGEFILE_SOURCE 1
-#  endif
-#  ifdef _FILE_OFFSET_BITS
-#    undef _FILE_OFFSET_BITS
-#  endif
-#endif
-
-#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
-#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
-#else
-#  define ZLIB_INTERNAL
-#endif
-
-#include <stdio.h>
-#include "zlib.h"
-#ifdef STDC
-#  include <string.h>
-#  include <stdlib.h>
-#  include <limits.h>
-#endif
-#include <fcntl.h>
-
-#ifdef NO_DEFLATE       /* for compatibility with old definition */
-#  define NO_GZCOMPRESS
-#endif
-
-#ifdef _MSC_VER
-#  include <io.h>
-#  define vsnprintf _vsnprintf
-#endif
-
-#ifndef local
-#  define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-/* gz* functions always use library allocation functions */
-#ifndef STDC
-  extern voidp  malloc OF((uInt size));
-  extern void   free   OF((voidpf ptr));
-#endif
-
-/* get errno and strerror definition */
-#if defined UNDER_CE
-#  include <windows.h>
-#  define zstrerror() gz_strwinerror((DWORD)GetLastError())
-#else
-#  ifdef STDC
-#    include <errno.h>
-#    define zstrerror() strerror(errno)
-#  else
-#    define zstrerror() "stdio error (consult errno)"
-#  endif
-#endif
-
-/* provide prototypes for these when building zlib without LFS */
-#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
-    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-    ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
-    ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
-    ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
-#endif
-
-/* default i/o buffer size -- double this for output when reading */
-#define GZBUFSIZE 8192
-
-/* gzip modes, also provide a little integrity check on the passed structure */
-#define GZ_NONE 0
-#define GZ_READ 7247
-#define GZ_WRITE 31153
-#define GZ_APPEND 1     /* mode set to GZ_WRITE after the file is opened */
-
-/* values for gz_state how */
-#define LOOK 0      /* look for a gzip header */
-#define COPY 1      /* copy input directly */
-#define GZIP 2      /* decompress a gzip stream */
-
-/* internal gzip file state data structure */
-typedef struct {
-        /* used for both reading and writing */
-    int mode;               /* see gzip modes above */
-    int fd;                 /* file descriptor */
-    char *path;             /* path or fd for error messages */
-    z_off64_t pos;          /* current position in uncompressed data */
-    unsigned size;          /* buffer size, zero if not allocated yet */
-    unsigned want;          /* requested buffer size, default is GZBUFSIZE */
-    unsigned char *in;      /* input buffer */
-    unsigned char *out;     /* output buffer (double-sized when reading) */
-    unsigned char *next;    /* next output data to deliver or write */
-        /* just for reading */
-    unsigned have;          /* amount of output data unused at next */
-    int eof;                /* true if end of input file reached */
-    z_off64_t start;        /* where the gzip data started, for rewinding */
-    z_off64_t raw;          /* where the raw data started, for seeking */
-    int how;                /* 0: get header, 1: copy, 2: decompress */
-    int direct;             /* true if last read direct, false if gzip */
-        /* just for writing */
-    int level;              /* compression level */
-    int strategy;           /* compression strategy */
-        /* seek request */
-    z_off64_t skip;         /* amount to skip (already rewound if backwards) */
-    int seek;               /* true if seek request pending */
-        /* error information */
-    int err;                /* error code */
-    char *msg;              /* error message */
-        /* zlib inflate or deflate stream */
-    z_stream strm;          /* stream structure in-place (not a pointer) */
-} gz_state;
-typedef gz_state FAR *gz_statep;
-
-/* shared functions */
-void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
-#if defined UNDER_CE
-char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
-#endif
-
-/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
-   value -- needed when comparing unsigned to z_off64_t, which is signed
-   (possible z_off64_t types off_t, off64_t, and long are all signed) */
-#ifdef INT_MAX
-#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
-#else
-unsigned ZLIB_INTERNAL gz_intmax OF((void));
-#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
-#endif
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/gzlib.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,561 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/*
- * Copyright (C) 2004, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
-#  define LSEEK lseek64
-#else
-#  define LSEEK lseek
-#endif
-
-/* Local functions */
-local void gz_reset OF((gz_statep));
-local gzFile gz_open OF((const char *, int, const char *));
-
-#if defined UNDER_CE
-
-/* Map the Windows error number in ERROR to a locale-dependent error message
-   string and return a pointer to it.  Typically, the values for ERROR come
-   from GetLastError.
-
-   The string pointed to shall not be modified by the application, but may be
-   overwritten by a subsequent call to gz_strwinerror
-
-   The gz_strwinerror function does not change the current setting of
-   GetLastError. */
-char ZLIB_INTERNAL *gz_strwinerror (error)
-     DWORD error;
-{
-    static char buf[1024];
-
-    wchar_t *msgbuf;
-    DWORD lasterr = GetLastError();
-    DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
-        | FORMAT_MESSAGE_ALLOCATE_BUFFER,
-        NULL,
-        error,
-        0, /* Default language */
-        (LPVOID)&msgbuf,
-        0,
-        NULL);
-    if (chars != 0) {
-        /* If there is an \r\n appended, zap it.  */
-        if (chars >= 2
-            && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
-            chars -= 2;
-            msgbuf[chars] = 0;
-        }
-
-        if (chars > sizeof (buf) - 1) {
-            chars = sizeof (buf) - 1;
-            msgbuf[chars] = 0;
-        }
-
-        wcstombs(buf, msgbuf, chars + 1);
-        LocalFree(msgbuf);
-    }
-    else {
-        sprintf(buf, "unknown win32 error (%ld)", error);
-    }
-
-    SetLastError(lasterr);
-    return buf;
-}
-
-#endif /* UNDER_CE */
-
-/* Reset gzip file state */
-local void gz_reset(state)
-    gz_statep state;
-{
-    if (state->mode == GZ_READ) {   /* for reading ... */
-        state->have = 0;            /* no output data available */
-        state->eof = 0;             /* not at end of file */
-        state->how = LOOK;          /* look for gzip header */
-        state->direct = 1;          /* default for empty file */
-    }
-    state->seek = 0;                /* no seek request pending */
-    gz_error(state, Z_OK, NULL);    /* clear error */
-    state->pos = 0;                 /* no uncompressed data yet */
-    state->strm.avail_in = 0;       /* no input data yet */
-}
-
-/* Open a gzip file either by name or file descriptor. */
-local gzFile gz_open(path, fd, mode)
-    const char *path;
-    int fd;
-    const char *mode;
-{
-    gz_statep state;
-
-    /* allocate gzFile structure to return */
-    state = malloc(sizeof(gz_state));
-    if (state == NULL)
-        return NULL;
-    state->size = 0;            /* no buffers allocated yet */
-    state->want = GZBUFSIZE;    /* requested buffer size */
-    state->msg = NULL;          /* no error message yet */
-
-    /* interpret mode */
-    state->mode = GZ_NONE;
-    state->level = Z_DEFAULT_COMPRESSION;
-    state->strategy = Z_DEFAULT_STRATEGY;
-    while (*mode) {
-        if (*mode >= '0' && *mode <= '9')
-            state->level = *mode - '0';
-        else
-            switch (*mode) {
-            case 'r':
-                state->mode = GZ_READ;
-                break;
-#ifndef NO_GZCOMPRESS
-            case 'w':
-                state->mode = GZ_WRITE;
-                break;
-            case 'a':
-                state->mode = GZ_APPEND;
-                break;
-#endif
-            case '+':       /* can't read and write at the same time */
-                free(state);
-                return NULL;
-            case 'b':       /* ignore -- will request binary anyway */
-                break;
-            case 'f':
-                state->strategy = Z_FILTERED;
-                break;
-            case 'h':
-                state->strategy = Z_HUFFMAN_ONLY;
-                break;
-            case 'R':
-                state->strategy = Z_RLE;
-                break;
-            case 'F':
-                state->strategy = Z_FIXED;
-            default:        /* could consider as an error, but just ignore */
-                ;
-            }
-        mode++;
-    }
-
-    /* must provide an "r", "w", or "a" */
-    if (state->mode == GZ_NONE) {
-        free(state);
-        return NULL;
-    }
-
-    /* save the path name for error messages */
-    state->path = malloc(strlen(path) + 1);
-    if (state->path == NULL) {
-        free(state);
-        return NULL;
-    }
-    strcpy(state->path, path);
-
-    /* open the file with the appropriate mode (or just use fd) */
-    state->fd = fd != -1 ? fd :
-        open(path,
-#ifdef O_LARGEFILE
-            O_LARGEFILE |
-#endif
-#ifdef O_BINARY
-            O_BINARY |
-#endif
-            (state->mode == GZ_READ ?
-                O_RDONLY :
-                (O_WRONLY | O_CREAT | (
-                    state->mode == GZ_WRITE ?
-                        O_TRUNC :
-                        O_APPEND))),
-            0666);
-    if (state->fd == -1) {
-        free(state->path);
-        free(state);
-        return NULL;
-    }
-    if (state->mode == GZ_APPEND)
-        state->mode = GZ_WRITE;         /* simplify later checks */
-
-    /* save the current position for rewinding (only if reading) */
-    if (state->mode == GZ_READ) {
-        state->start = LSEEK(state->fd, 0, SEEK_CUR);
-        if (state->start == -1) state->start = 0;
-    }
-
-    /* initialize stream */
-    gz_reset(state);
-
-    /* return stream */
-    return (gzFile)state;
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzopen(path, mode)
-    const char *path;
-    const char *mode;
-{
-    return gz_open(path, -1, mode);
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzopen64(path, mode)
-    const char *path;
-    const char *mode;
-{
-    return gz_open(path, -1, mode);
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzdopen(fd, mode)
-    int fd;
-    const char *mode;
-{
-    char *path;         /* identifier for error messages */
-    gzFile gz;
-
-    if (fd == -1 || (path = malloc(7 + 3 * sizeof(int))) == NULL)
-        return NULL;
-    sprintf(path, "<fd:%d>", fd);   /* for debugging */
-    gz = gz_open(path, fd, mode);
-    free(path);
-    return gz;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzbuffer(file, size)
-    gzFile file;
-    unsigned size;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return -1;
-
-    /* make sure we haven't already allocated memory */
-    if (state->size != 0)
-        return -1;
-
-    /* check and set requested size */
-    if (size == 0)
-        return -1;
-    state->want = size;
-    return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzrewind(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no error */
-    if (state->mode != GZ_READ || state->err != Z_OK)
-        return -1;
-
-    /* back up and start over */
-    if (LSEEK(state->fd, state->start, SEEK_SET) == -1)
-        return -1;
-    gz_reset(state);
-    return 0;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gzseek64(file, offset, whence)
-    gzFile file;
-    z_off64_t offset;
-    int whence;
-{
-    unsigned n;
-    z_off64_t ret;
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return -1;
-
-    /* check that there's no error */
-    if (state->err != Z_OK)
-        return -1;
-
-    /* can only seek from start or relative to current position */
-    if (whence != SEEK_SET && whence != SEEK_CUR)
-        return -1;
-
-    /* normalize offset to a SEEK_CUR specification */
-    if (whence == SEEK_SET)
-        offset -= state->pos;
-    else if (state->seek)
-        offset += state->skip;
-    state->seek = 0;
-
-    /* if within raw area while reading, just go there */
-    if (state->mode == GZ_READ && state->how == COPY &&
-        state->pos + offset >= state->raw) {
-        ret = LSEEK(state->fd, offset - state->have, SEEK_CUR);
-        if (ret == -1)
-            return -1;
-        state->have = 0;
-        state->eof = 0;
-        state->seek = 0;
-        gz_error(state, Z_OK, NULL);
-        state->strm.avail_in = 0;
-        state->pos += offset;
-        return state->pos;
-    }
-
-    /* calculate skip amount, rewinding if needed for back seek when reading */
-    if (offset < 0) {
-        if (state->mode != GZ_READ)         /* writing -- can't go backwards */
-            return -1;
-        offset += state->pos;
-        if (offset < 0)                     /* before start of file! */
-            return -1;
-        if (gzrewind(file) == -1)           /* rewind, then skip to offset */
-            return -1;
-    }
-
-    /* if reading, skip what's in output buffer (one less gzgetc() check) */
-    if (state->mode == GZ_READ) {
-        n = GT_OFF(state->have) || (z_off64_t)state->have > offset ?
-            (unsigned)offset : state->have;
-        state->have -= n;
-        state->next += n;
-        state->pos += n;
-        offset -= n;
-    }
-
-    /* request skip (if not zero) */
-    if (offset) {
-        state->seek = 1;
-        state->skip = offset;
-    }
-    return state->pos + offset;
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gzseek(file, offset, whence)
-    gzFile file;
-    z_off_t offset;
-    int whence;
-{
-    z_off64_t ret;
-
-    ret = gzseek64(file, (z_off64_t)offset, whence);
-    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gztell64(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return -1;
-
-    /* return position */
-    return state->pos + (state->seek ? state->skip : 0);
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gztell(file)
-    gzFile file;
-{
-    z_off64_t ret;
-
-    ret = gztell64(file);
-    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gzoffset64(file)
-    gzFile file;
-{
-    z_off64_t offset;
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return -1;
-
-    /* compute and return effective offset in file */
-    offset = LSEEK(state->fd, 0, SEEK_CUR);
-    if (offset == -1)
-        return -1;
-    if (state->mode == GZ_READ)             /* reading */
-        offset -= state->strm.avail_in;     /* don't count buffered input */
-    return offset;
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gzoffset(file)
-    gzFile file;
-{
-    z_off64_t ret;
-
-    ret = gzoffset64(file);
-    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzeof(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return 0;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return 0;
-
-    /* return end-of-file state */
-    return state->mode == GZ_READ ?
-        (state->eof && state->strm.avail_in == 0 && state->have == 0) : 0;
-}
-
-/* -- see zlib.h -- */
-const char * ZEXPORT gzerror(file, errnum)
-    gzFile file;
-    int *errnum;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return NULL;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return NULL;
-
-    /* return error information */
-    if (errnum != NULL)
-        *errnum = state->err;
-    return state->msg == NULL ? "" : state->msg;
-}
-
-/* -- see zlib.h -- */
-void ZEXPORT gzclearerr(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return;
-
-    /* clear error and end-of-file */
-    if (state->mode == GZ_READ)
-        state->eof = 0;
-    gz_error(state, Z_OK, NULL);
-}
-
-/* Create an error message in allocated memory and set state->err and
-   state->msg accordingly.  Free any previous error message already there.  Do
-   not try to free or allocate space if the error is Z_MEM_ERROR (out of
-   memory).  Simply save the error message as a static string.  If there is an
-   allocation failure constructing the error message, then convert the error to
-   out of memory. */
-void ZLIB_INTERNAL gz_error(state, err, msg)
-    gz_statep state;
-    int err;
-    const char *msg;
-{
-    /* free previously allocated message and clear */
-    if (state->msg != NULL) {
-        if (state->err != Z_MEM_ERROR)
-            free(state->msg);
-        state->msg = NULL;
-    }
-
-    /* set error code, and if no message, then done */
-    state->err = err;
-    if (msg == NULL)
-        return;
-
-    /* for an out of memory error, save as static string */
-    if (err == Z_MEM_ERROR) {
-        state->msg = (char *)msg;
-        return;
-    }
-
-    /* construct error message with path */
-    if ((state->msg = malloc(strlen(state->path) + strlen(msg) + 3)) == NULL) {
-        state->err = Z_MEM_ERROR;
-        state->msg = (char *)"out of memory";
-        return;
-    }
-    strcpy(state->msg, state->path);
-    strcat(state->msg, ": ");
-    strcat(state->msg, msg);
-    return;
-}
-
-#ifndef INT_MAX
-/* portably return maximum value for an int (when limits.h presumed not
-   available) -- we need to do this to cover cases where 2's complement not
-   used, since C standard permits 1's complement and sign-bit representations,
-   otherwise we could just use ((unsigned)-1) >> 1 */
-unsigned ZLIB_INTERNAL gz_intmax()
-{
-    unsigned p, q;
-
-    p = 1;
-    do {
-        q = p;
-        p <<= 1;
-        p++;
-    } while (p > q);
-    return q >> 1;
-}
-#endif
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/gzread.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,677 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* gzread.c -- zlib functions for reading gzip files
- * Copyright (C) 2004, 2005, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* Local functions */
-local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
-local int gz_avail OF((gz_statep));
-local int gz_next4 OF((gz_statep, unsigned long *));
-local int gz_head OF((gz_statep));
-local int gz_decomp OF((gz_statep));
-local int gz_make OF((gz_statep));
-local int gz_skip OF((gz_statep, z_off64_t));
-
-/* Use read() to load a buffer -- return -1 on error, otherwise 0.  Read from
-   state->fd, and update state->eof, state->err, and state->msg as appropriate.
-   This function needs to loop on read(), since read() is not guaranteed to
-   read the number of bytes requested, depending on the type of descriptor. */
-local int gz_load(state, buf, len, have)
-    gz_statep state;
-    unsigned char *buf;
-    unsigned len;
-    unsigned *have;
-{
-    int ret;
-
-    *have = 0;
-    do {
-        ret = read(state->fd, buf + *have, len - *have);
-        if (ret <= 0)
-            break;
-        *have += ret;
-    } while (*have < len);
-    if (ret < 0) {
-        gz_error(state, Z_ERRNO, zstrerror());
-        return -1;
-    }
-    if (ret == 0)
-        state->eof = 1;
-    return 0;
-}
-
-/* Load up input buffer and set eof flag if last data loaded -- return -1 on
-   error, 0 otherwise.  Note that the eof flag is set when the end of the input
-   file is reached, even though there may be unused data in the buffer.  Once
-   that data has been used, no more attempts will be made to read the file.
-   gz_avail() assumes that strm->avail_in == 0. */
-local int gz_avail(state)
-    gz_statep state;
-{
-    z_streamp strm = &(state->strm);
-
-    if (state->err != Z_OK)
-        return -1;
-    if (state->eof == 0) {
-        if (gz_load(state, state->in, state->size,
-                (unsigned *)&(strm->avail_in)) == -1)
-            return -1;
-        strm->next_in = state->in;
-    }
-    return 0;
-}
-
-/* Get next byte from input, or -1 if end or error. */
-#define NEXT() ((strm->avail_in == 0 && gz_avail(state) == -1) ? -1 : \
-                (strm->avail_in == 0 ? -1 : \
-                 (strm->avail_in--, *(strm->next_in)++)))
-
-/* Get a four-byte little-endian integer and return 0 on success and the value
-   in *ret.  Otherwise -1 is returned and *ret is not modified. */
-local int gz_next4(state, ret)
-    gz_statep state;
-    unsigned long *ret;
-{
-    int ch;
-    unsigned long val;
-    z_streamp strm = &(state->strm);
-
-    val = NEXT();
-    val += (unsigned)NEXT() << 8;
-    val += (unsigned long)NEXT() << 16;
-    ch = NEXT();
-    if (ch == -1)
-        return -1;
-    val += (unsigned long)ch << 24;
-    *ret = val;
-    return 0;
-}
-
-/* Look for gzip header, set up for inflate or copy.  state->have must be zero.
-   If this is the first time in, allocate required memory.  state->how will be
-   left unchanged if there is no more input data available, will be set to COPY
-   if there is no gzip header and direct copying will be performed, or it will
-   be set to GZIP for decompression, and the gzip header will be skipped so
-   that the next available input data is the raw deflate stream.  If direct
-   copying, then leftover input data from the input buffer will be copied to
-   the output buffer.  In that case, all further file reads will be directly to
-   either the output buffer or a user buffer.  If decompressing, the inflate
-   state and the check value will be initialized.  gz_head() will return 0 on
-   success or -1 on failure.  Failures may include read errors or gzip header
-   errors.  */
-local int gz_head(state)
-    gz_statep state;
-{
-    z_streamp strm = &(state->strm);
-    int flags;
-    unsigned len;
-
-    /* allocate read buffers and inflate memory */
-    if (state->size == 0) {
-        /* allocate buffers */
-        state->in = malloc(state->want);
-        state->out = malloc(state->want << 1);
-        if (state->in == NULL || state->out == NULL) {
-            if (state->out != NULL)
-                free(state->out);
-            if (state->in != NULL)
-                free(state->in);
-            gz_error(state, Z_MEM_ERROR, "out of memory");
-            return -1;
-        }
-        state->size = state->want;
-
-        /* allocate inflate memory */
-        state->strm.zalloc = Z_NULL;
-        state->strm.zfree = Z_NULL;
-        state->strm.opaque = Z_NULL;
-        state->strm.avail_in = 0;
-        state->strm.next_in = Z_NULL;
-        if (inflateInit2(&(state->strm), -15) != Z_OK) {    /* raw inflate */
-            free(state->out);
-            free(state->in);
-            state->size = 0;
-            gz_error(state, Z_MEM_ERROR, "out of memory");
-            return -1;
-        }
-    }
-
-    /* get some data in the input buffer */
-    if (strm->avail_in == 0) {
-        if (gz_avail(state) == -1)
-            return -1;
-        if (strm->avail_in == 0)
-            return 0;
-    }
-
-    /* look for the gzip magic header bytes 31 and 139 */
-    if (strm->next_in[0] == 31) {
-        strm->avail_in--;
-        strm->next_in++;
-        if (strm->avail_in == 0 && gz_avail(state) == -1)
-            return -1;
-        if (strm->avail_in && strm->next_in[0] == 139) {
-            /* we have a gzip header, woo hoo! */
-            strm->avail_in--;
-            strm->next_in++;
-
-            /* skip rest of header */
-            if (NEXT() != 8) {      /* compression method */
-                gz_error(state, Z_DATA_ERROR, "unknown compression method");
-                return -1;
-            }
-            flags = NEXT();
-            if (flags & 0xe0) {     /* reserved flag bits */
-                gz_error(state, Z_DATA_ERROR, "unknown header flags set");
-                return -1;
-            }
-            NEXT();                 /* modification time */
-            NEXT();
-            NEXT();
-            NEXT();
-            NEXT();                 /* extra flags */
-            NEXT();                 /* operating system */
-            if (flags & 4) {        /* extra field */
-                len = (unsigned)NEXT();
-                len += (unsigned)NEXT() << 8;
-                while (len--)
-                    if (NEXT() < 0)
-                        break;
-            }
-            if (flags & 8)          /* file name */
-                while (NEXT() > 0)
-                    ;
-            if (flags & 16)         /* comment */
-                while (NEXT() > 0)
-                    ;
-            if (flags & 2) {        /* header crc */
-                NEXT();
-                NEXT();
-            }
-            /* an unexpected end of file is not checked for here -- it will be
-               noticed on the first request for uncompressed data */
-
-            /* set up for decompression */
-            inflateReset(strm);
-            strm->adler = crc32(0L, Z_NULL, 0);
-            state->how = GZIP;
-            state->direct = 0;
-            return 0;
-        }
-        else {
-            /* not a gzip file -- save first byte (31) and fall to raw i/o */
-            state->out[0] = 31;
-            state->have = 1;
-        }
-    }
-
-    /* doing raw i/o, save start of raw data for seeking, copy any leftover
-       input to output -- this assumes that the output buffer is larger than
-       the input buffer, which also assures space for gzungetc() */
-    state->raw = state->pos;
-    state->next = state->out;
-    if (strm->avail_in) {
-        memcpy(state->next + state->have, strm->next_in, strm->avail_in);
-        state->have += strm->avail_in;
-        strm->avail_in = 0;
-    }
-    state->how = COPY;
-    state->direct = 1;
-    return 0;
-}
-
-/* Decompress from input to the provided next_out and avail_out in the state.
-   If the end of the compressed data is reached, then verify the gzip trailer
-   check value and length (modulo 2^32).  state->have and state->next are set
-   to point to the just decompressed data, and the crc is updated.  If the
-   trailer is verified, state->how is reset to LOOK to look for the next gzip
-   stream or raw data, once state->have is depleted.  Returns 0 on success, -1
-   on failure.  Failures may include invalid compressed data or a failed gzip
-   trailer verification. */
-local int gz_decomp(state)
-    gz_statep state;
-{
-    int ret;
-    unsigned had;
-    unsigned long crc, len;
-    z_streamp strm = &(state->strm);
-
-    /* fill output buffer up to end of deflate stream */
-    had = strm->avail_out;
-    do {
-        /* get more input for inflate() */
-        if (strm->avail_in == 0 && gz_avail(state) == -1)
-            return -1;
-        if (strm->avail_in == 0) {
-            gz_error(state, Z_DATA_ERROR, "unexpected end of file");
-            return -1;
-        }
-
-        /* decompress and handle errors */
-        ret = inflate(strm, Z_NO_FLUSH);
-        if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) {
-            gz_error(state, Z_STREAM_ERROR,
-                      "internal error: inflate stream corrupt");
-            return -1;
-        }
-        if (ret == Z_MEM_ERROR) {
-            gz_error(state, Z_MEM_ERROR, "out of memory");
-            return -1;
-        }
-        if (ret == Z_DATA_ERROR) {              /* deflate stream invalid */
-            gz_error(state, Z_DATA_ERROR,
-                      strm->msg == NULL ? "compressed data error" : strm->msg);
-            return -1;
-        }
-    } while (strm->avail_out && ret != Z_STREAM_END);
-
-    /* update available output and crc check value */
-    state->have = had - strm->avail_out;
-    state->next = strm->next_out - state->have;
-    strm->adler = crc32(strm->adler, state->next, state->have);
-
-    /* check gzip trailer if at end of deflate stream */
-    if (ret == Z_STREAM_END) {
-        if (gz_next4(state, &crc) == -1 || gz_next4(state, &len) == -1) {
-            gz_error(state, Z_DATA_ERROR, "unexpected end of file");
-            return -1;
-        }
-        if (crc != strm->adler) {
-            gz_error(state, Z_DATA_ERROR, "incorrect data check");
-            return -1;
-        }
-        if (len != (strm->total_out & 0xffffffffL)) {
-            gz_error(state, Z_DATA_ERROR, "incorrect length check");
-            return -1;
-        }
-        state->how = LOOK;      /* ready for next stream, once have is 0 (leave
-                                   state->direct unchanged to remember how) */
-    }
-
-    /* good decompression */
-    return 0;
-}
-
-/* Make data and put in the output buffer.  Assumes that state->have == 0.
-   Data is either copied from the input file or decompressed from the input
-   file depending on state->how.  If state->how is LOOK, then a gzip header is
-   looked for (and skipped if found) to determine wither to copy or decompress.
-   Returns -1 on error, otherwise 0.  gz_make() will leave state->have as COPY
-   or GZIP unless the end of the input file has been reached and all data has
-   been processed.  */
-local int gz_make(state)
-    gz_statep state;
-{
-    z_streamp strm = &(state->strm);
-
-    if (state->how == LOOK) {           /* look for gzip header */
-        if (gz_head(state) == -1)
-            return -1;
-        if (state->have)                /* got some data from gz_head() */
-            return 0;
-    }
-    if (state->how == COPY) {           /* straight copy */
-        if (gz_load(state, state->out, state->size << 1, &(state->have)) == -1)
-            return -1;
-        state->next = state->out;
-    }
-    else if (state->how == GZIP) {      /* decompress */
-        strm->avail_out = state->size << 1;
-        strm->next_out = state->out;
-        if (gz_decomp(state) == -1)
-            return -1;
-    }
-    return 0;
-}
-
-/* Skip len uncompressed bytes of output.  Return -1 on error, 0 on success. */
-local int gz_skip(state, len)
-    gz_statep state;
-    z_off64_t len;
-{
-    unsigned n;
-
-    /* skip over len bytes or reach end-of-file, whichever comes first */
-    while (len)
-        /* skip over whatever is in output buffer */
-        if (state->have) {
-            n = GT_OFF(state->have) || (z_off64_t)state->have > len ?
-                (unsigned)len : state->have;
-            state->have -= n;
-            state->next += n;
-            state->pos += n;
-            len -= n;
-        }
-
-        /* output buffer empty -- return if we're at the end of the input */
-        else if (state->eof && state->strm.avail_in == 0)
-            break;
-
-        /* need more data to skip -- load up output buffer */
-        else {
-            /* get more output, looking for header if required */
-            if (gz_make(state) == -1)
-                return -1;
-        }
-    return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzread(file, buf, len)
-    gzFile file;
-    voidp buf;
-    unsigned len;
-{
-    unsigned got, n;
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're reading and that there's no error */
-    if (state->mode != GZ_READ || state->err != Z_OK)
-        return -1;
-
-    /* since an int is returned, make sure len fits in one, otherwise return
-       with an error (this avoids the flaw in the interface) */
-    if ((int)len < 0) {
-        gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
-        return -1;
-    }
-
-    /* if len is zero, avoid unnecessary operations */
-    if (len == 0)
-        return 0;
-
-    /* process a skip request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_skip(state, state->skip) == -1)
-            return -1;
-    }
-
-    /* get len bytes to buf, or less than len if at the end */
-    got = 0;
-    do {
-        /* first just try copying data from the output buffer */
-        if (state->have) {
-            n = state->have > len ? len : state->have;
-            memcpy(buf, state->next, n);
-            state->next += n;
-            state->have -= n;
-        }
-
-        /* output buffer empty -- return if we're at the end of the input */
-        else if (state->eof && strm->avail_in == 0)
-            break;
-
-        /* need output data -- for small len or new stream load up our output
-           buffer */
-        else if (state->how == LOOK || len < (state->size << 1)) {
-            /* get more output, looking for header if required */
-            if (gz_make(state) == -1)
-                return -1;
-            continue;       /* no progress yet -- go back to memcpy() above */
-            /* the copy above assures that we will leave with space in the
-               output buffer, allowing at least one gzungetc() to succeed */
-        }
-
-        /* large len -- read directly into user buffer */
-        else if (state->how == COPY) {      /* read directly */
-            if (gz_load(state, buf, len, &n) == -1)
-                return -1;
-        }
-
-        /* large len -- decompress directly into user buffer */
-        else {  /* state->how == GZIP */
-            strm->avail_out = len;
-            strm->next_out = buf;
-            if (gz_decomp(state) == -1)
-                return -1;
-            n = state->have;
-            state->have = 0;
-        }
-
-        /* update progress */
-        len -= n;
-        buf = (char *)buf + n;
-        got += n;
-        state->pos += n;
-    } while (len);
-
-    /* return number of bytes read into user buffer (will fit in int) */
-    return (int)got;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzgetc(file)
-    gzFile file;
-{
-    int ret;
-    unsigned char buf[1];
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no error */
-    if (state->mode != GZ_READ || state->err != Z_OK)
-        return -1;
-
-    /* try output buffer (no need to check for skip request) */
-    if (state->have) {
-        state->have--;
-        state->pos++;
-        return *(state->next)++;
-    }
-
-    /* nothing there -- try gzread() */
-    ret = gzread(file, buf, 1);
-    return ret < 1 ? -1 : buf[0];
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzungetc(c, file)
-    int c;
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no error */
-    if (state->mode != GZ_READ || state->err != Z_OK)
-        return -1;
-
-    /* process a skip request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_skip(state, state->skip) == -1)
-            return -1;
-    }
-
-    /* can't push EOF */
-    if (c < 0)
-        return -1;
-
-    /* if output buffer empty, put byte at end (allows more pushing) */
-    if (state->have == 0) {
-        state->have = 1;
-        state->next = state->out + (state->size << 1) - 1;
-        state->next[0] = c;
-        state->pos--;
-        return c;
-    }
-
-    /* if no room, give up (must have already done a gzungetc()) */
-    if (state->have == (state->size << 1)) {
-        gz_error(state, Z_BUF_ERROR, "out of room to push characters");
-        return -1;
-    }
-
-    /* slide output data if needed and insert byte before existing data */
-    if (state->next == state->out) {
-        unsigned char *src = state->out + state->have;
-        unsigned char *dest = state->out + (state->size << 1);
-        while (src > state->out)
-            *--dest = *--src;
-        state->next = dest;
-    }
-    state->have++;
-    state->next--;
-    state->next[0] = c;
-    state->pos--;
-    return c;
-}
-
-/* -- see zlib.h -- */
-char * ZEXPORT gzgets(file, buf, len)
-    gzFile file;
-    char *buf;
-    int len;
-{
-    unsigned left, n;
-    char *str;
-    unsigned char *eol;
-    gz_statep state;
-
-    /* check parameters and get internal structure */
-    if (file == NULL || buf == NULL || len < 1)
-        return NULL;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no error */
-    if (state->mode != GZ_READ || state->err != Z_OK)
-        return NULL;
-
-    /* process a skip request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_skip(state, state->skip) == -1)
-            return NULL;
-    }
-
-    /* copy output bytes up to new line or len - 1, whichever comes first --
-       append a terminating zero to the string (we don't check for a zero in
-       the contents, let the user worry about that) */
-    str = buf;
-    left = (unsigned)len - 1;
-    if (left) do {
-        /* assure that something is in the output buffer */
-        if (state->have == 0) {
-            if (gz_make(state) == -1)
-                return NULL;            /* error */
-            if (state->have == 0) {     /* end of file */
-                if (buf == str)         /* got bupkus */
-                    return NULL;
-                break;                  /* got something -- return it */
-            }
-        }
-
-        /* look for end-of-line in current output buffer */
-        n = state->have > left ? left : state->have;
-        eol = memchr(state->next, '\n', n);
-        if (eol != NULL)
-            n = (unsigned)(eol - state->next) + 1;
-
-        /* copy through end-of-line, or remainder if not found */
-        memcpy(buf, state->next, n);
-        state->have -= n;
-        state->next += n;
-        state->pos += n;
-        left -= n;
-        buf += n;
-    } while (left && eol == NULL);
-
-    /* found end-of-line or out of space -- terminate string and return it */
-    buf[0] = 0;
-    return str;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzdirect(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return 0;
-    state = (gz_statep)file;
-
-    /* check that we're reading */
-    if (state->mode != GZ_READ)
-        return 0;
-
-    /* if the state is not known, but we can find out, then do so (this is
-       mainly for right after a gzopen() or gzdopen()) */
-    if (state->how == LOOK && state->have == 0)
-        (void)gz_head(state);
-
-    /* return 1 if reading direct, 0 if decompressing a gzip stream */
-    return state->direct;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzclose_r(file)
-    gzFile file;
-{
-    int ret;
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-
-    /* check that we're reading */
-    if (state->mode != GZ_READ)
-        return Z_STREAM_ERROR;
-
-    /* free memory and close file */
-    if (state->size) {
-        inflateEnd(&(state->strm));
-        free(state->out);
-        free(state->in);
-    }
-    gz_error(state, Z_OK, NULL);
-    free(state->path);
-    ret = close(state->fd);
-    free(state);
-    return ret ? Z_ERRNO : Z_OK;
-}
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/gzwrite.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,555 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* Local functions */
-local int gz_init OF((gz_statep));
-local int gz_comp OF((gz_statep, int));
-local int gz_zero OF((gz_statep, z_off64_t));
-
-/* Initialize state for writing a gzip file.  Mark initialization by setting
-   state->size to non-zero.  Return -1 on failure or 0 on success. */
-local int gz_init(state)
-    gz_statep state;
-{
-    int ret;
-    z_streamp strm = &(state->strm);
-
-    /* allocate input and output buffers */
-    state->in = malloc(state->want);
-    state->out = malloc(state->want);
-    if (state->in == NULL || state->out == NULL) {
-        if (state->out != NULL)
-            free(state->out);
-        if (state->in != NULL)
-            free(state->in);
-        gz_error(state, Z_MEM_ERROR, "out of memory");
-        return -1;
-    }
-
-    /* allocate deflate memory, set up for gzip compression */
-    strm->zalloc = Z_NULL;
-    strm->zfree = Z_NULL;
-    strm->opaque = Z_NULL;
-    ret = deflateInit2(strm, state->level, Z_DEFLATED,
-                       15 + 16, 8, state->strategy);
-    if (ret != Z_OK) {
-        free(state->in);
-        gz_error(state, Z_MEM_ERROR, "out of memory");
-        return -1;
-    }
-
-    /* mark state as initialized */
-    state->size = state->want;
-
-    /* initialize write buffer */
-    strm->avail_out = state->size;
-    strm->next_out = state->out;
-    state->next = strm->next_out;
-    return 0;
-}
-
-/* Compress whatever is at avail_in and next_in and write to the output file.
-   Return -1 if there is an error writing to the output file, otherwise 0.
-   flush is assumed to be a valid deflate() flush value.  If flush is Z_FINISH,
-   then the deflate() state is reset to start a new gzip stream. */
-local int gz_comp(state, flush)
-    gz_statep state;
-    int flush;
-{
-    int ret, got;
-    unsigned have;
-    z_streamp strm = &(state->strm);
-
-    /* allocate memory if this is the first time through */
-    if (state->size == 0 && gz_init(state) == -1)
-        return -1;
-
-    /* run deflate() on provided input until it produces no more output */
-    ret = Z_OK;
-    do {
-        /* write out current buffer contents if full, or if flushing, but if
-           doing Z_FINISH then don't write until we get to Z_STREAM_END */
-        if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
-            (flush != Z_FINISH || ret == Z_STREAM_END))) {
-            have = (unsigned)(strm->next_out - state->next);
-            if (have && ((got = write(state->fd, state->next, have)) < 0 ||
-                         (unsigned)got != have)) {
-                gz_error(state, Z_ERRNO, zstrerror());
-                return -1;
-            }
-            if (strm->avail_out == 0) {
-                strm->avail_out = state->size;
-                strm->next_out = state->out;
-            }
-            state->next = strm->next_out;
-        }
-
-        /* compress */
-        have = strm->avail_out;
-        ret = deflate(strm, flush);
-        if (ret == Z_STREAM_ERROR) {
-            gz_error(state, Z_STREAM_ERROR,
-                      "internal error: deflate stream corrupt");
-            return -1;
-        }
-        have -= strm->avail_out;
-    } while (have);
-
-    /* if that completed a deflate stream, allow another to start */
-    if (flush == Z_FINISH)
-        deflateReset(strm);
-
-    /* all done, no errors */
-    return 0;
-}
-
-/* Compress len zeros to output.  Return -1 on error, 0 on success. */
-local int gz_zero(state, len)
-    gz_statep state;
-    z_off64_t len;
-{
-    int first;
-    unsigned n;
-    z_streamp strm = &(state->strm);
-
-    /* consume whatever's left in the input buffer */
-    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
-        return -1;
-
-    /* compress len zeros (len guaranteed > 0) */
-    first = 1;
-    while (len) {
-        n = GT_OFF(state->size) || (z_off64_t)state->size > len ?
-            (unsigned)len : state->size;
-        if (first) {
-            memset(state->in, 0, n);
-            first = 0;
-        }
-        strm->avail_in = n;
-        strm->next_in = state->in;
-        state->pos += n;
-        if (gz_comp(state, Z_NO_FLUSH) == -1)
-            return -1;
-        len -= n;
-    }
-    return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzwrite(file, buf, len)
-    gzFile file;
-    voidpc buf;
-    unsigned len;
-{
-    unsigned put = len;
-    unsigned n;
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return 0;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return 0;
-
-    /* since an int is returned, make sure len fits in one, otherwise return
-       with an error (this avoids the flaw in the interface) */
-    if ((int)len < 0) {
-        gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
-        return 0;
-    }
-
-    /* if len is zero, avoid unnecessary operations */
-    if (len == 0)
-        return 0;
-
-    /* allocate memory if this is the first time through */
-    if (state->size == 0 && gz_init(state) == -1)
-        return 0;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return 0;
-    }
-
-    /* for small len, copy to input buffer, otherwise compress directly */
-    if (len < state->size) {
-        /* copy to input buffer, compress when full */
-        do {
-            if (strm->avail_in == 0)
-                strm->next_in = state->in;
-            n = state->size - strm->avail_in;
-            if (n > len)
-                n = len;
-            memcpy(strm->next_in + strm->avail_in, buf, n);
-            strm->avail_in += n;
-            state->pos += n;
-            buf = (char *)buf + n;
-            len -= n;
-            if (len && gz_comp(state, Z_NO_FLUSH) == -1)
-                return 0;
-        } while (len);
-    }
-    else {
-        /* consume whatever's left in the input buffer */
-        if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
-            return 0;
-
-        /* directly compress user buffer to file */
-        strm->avail_in = len;
-        strm->next_in = (voidp)buf;
-        state->pos += len;
-        if (gz_comp(state, Z_NO_FLUSH) == -1)
-            return 0;
-    }
-
-    /* input was all buffered or compressed (put will fit in int) */
-    return (int)put;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputc(file, c)
-    gzFile file;
-    int c;
-{
-    unsigned char buf[1];
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return -1;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return -1;
-    }
-
-    /* try writing to input buffer for speed (state->size == 0 if buffer not
-       initialized) */
-    if (strm->avail_in < state->size) {
-        if (strm->avail_in == 0)
-            strm->next_in = state->in;
-        strm->next_in[strm->avail_in++] = c;
-        state->pos++;
-        return c;
-    }
-
-    /* no room in buffer or not initialized, use gz_write() */
-    buf[0] = c;
-    if (gzwrite(file, buf, 1) != 1)
-        return -1;
-    return c;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputs(file, str)
-    gzFile file;
-    const char *str;
-{
-    int ret;
-    unsigned len;
-
-    /* write string */
-    len = (unsigned)strlen(str);
-    ret = gzwrite(file, str, len);
-    return ret == 0 && len != 0 ? -1 : ret;
-}
-
-#ifdef STDC
-#include <stdarg.h>
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzprintf (gzFile file, const char *format, ...)
-{
-    int size, len;
-    gz_statep state;
-    z_streamp strm;
-    va_list va;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return 0;
-
-    /* make sure we have some buffer space */
-    if (state->size == 0 && gz_init(state) == -1)
-        return 0;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return 0;
-    }
-
-    /* consume whatever's left in the input buffer */
-    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
-        return 0;
-
-    /* do the printf() into the input buffer, put length in len */
-    size = (int)(state->size);
-    state->in[size - 1] = 0;
-    va_start(va, format);
-#ifdef NO_vsnprintf
-#  ifdef HAS_vsprintf_void
-    (void)vsprintf(state->in, format, va);
-    va_end(va);
-    for (len = 0; len < size; len++)
-        if (state->in[len] == 0) break;
-#  else
-    len = vsprintf(state->in, format, va);
-    va_end(va);
-#  endif
-#else
-#  ifdef HAS_vsnprintf_void
-    (void)vsnprintf(state->in, size, format, va);
-    va_end(va);
-    len = strlen(state->in);
-#  else
-    len = vsnprintf((char *)(state->in), size, format, va);
-    va_end(va);
-#  endif
-#endif
-
-    /* check that printf() results fit in buffer */
-    if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
-        return 0;
-
-    /* update buffer and position, defer compression until needed */
-    strm->avail_in = (unsigned)len;
-    strm->next_in = state->in;
-    state->pos += len;
-    return len;
-}
-
-#else /* !STDC */
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-                       a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
-    gzFile file;
-    const char *format;
-    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-        a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
-{
-    int size, len;
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return 0;
-
-    /* make sure we have some buffer space */
-    if (state->size == 0 && gz_init(state) == -1)
-        return 0;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return 0;
-    }
-
-    /* consume whatever's left in the input buffer */
-    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
-        return 0;
-
-    /* do the printf() into the input buffer, put length in len */
-    size = (int)(state->size);
-    state->in[size - 1] = 0;
-#ifdef NO_snprintf
-#  ifdef HAS_sprintf_void
-    sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
-            a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-    for (len = 0; len < size; len++)
-        if (state->in[len] == 0) break;
-#  else
-    len = sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
-                a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#  endif
-#else
-#  ifdef HAS_snprintf_void
-    snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
-             a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-    len = strlen(state->in);
-#  else
-    len = snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
-                 a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#  endif
-#endif
-
-    /* check that printf() results fit in buffer */
-    if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
-        return 0;
-
-    /* update buffer and position, defer compression until needed */
-    strm->avail_in = (unsigned)len;
-    strm->next_in = state->in;
-    state->pos += len;
-    return len;
-}
-
-#endif
-
-/* -- see zlib.h -- */
-int ZEXPORT gzflush(file, flush)
-    gzFile file;
-    int flush;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return Z_STREAM_ERROR;
-
-    /* check flush parameter */
-    if (flush < 0 || flush > Z_FINISH)
-        return Z_STREAM_ERROR;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return -1;
-    }
-
-    /* compress remaining data with requested flush */
-    gz_comp(state, flush);
-    return state->err;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzsetparams(file, level, strategy)
-    gzFile file;
-    int level;
-    int strategy;
-{
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return Z_STREAM_ERROR;
-
-    /* if no change is requested, then do nothing */
-    if (level == state->level && strategy == state->strategy)
-        return Z_OK;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return -1;
-    }
-
-    /* change compression parameters for subsequent input */
-    if (state->size) {
-        /* flush previous input with previous parameters before changing */
-        if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
-            return state->err;
-        deflateParams(strm, level, strategy);
-    }
-    state->level = level;
-    state->strategy = strategy;
-    return Z_OK;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzclose_w(file)
-    gzFile file;
-{
-    int ret = 0;
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-
-    /* check that we're writing */
-    if (state->mode != GZ_WRITE)
-        return Z_STREAM_ERROR;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        ret += gz_zero(state, state->skip);
-    }
-
-    /* flush, free memory, and close file */
-    ret += gz_comp(state, Z_FINISH);
-    (void)deflateEnd(&(state->strm));
-    free(state->out);
-    free(state->in);
-    gz_error(state, Z_OK, NULL);
-    free(state->path);
-    ret += close(state->fd);
-    free(state);
-    return ret ? Z_ERRNO : Z_OK;
-}
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/infback.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,656 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* infback.c -- inflate using a call-back interface
- * Copyright (C) 1995-2009 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
-   This code is largely copied from inflate.c.  Normally either infback.o or
-   inflate.o would be linked into an application--not both.  The interface
-   with inffast.c is retained so that optimized assembler-coded versions of
-   inflate_fast() can be used with either inflate.c or infback.c.
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "inflate.h"
-#include "inffast.h"
-
-/* function prototypes */
-local void fixedtables OF((struct inflate_state FAR *state));
-
-/*
-   strm provides memory allocation functions in zalloc and zfree, or
-   Z_NULL to use the library memory allocation functions.
-
-   windowBits is in the range 8..15, and window is a user-supplied
-   window and output buffer that is 2**windowBits bytes.
- */
-int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size)
-z_streamp strm;
-int windowBits;
-unsigned char FAR *window;
-const char *version;
-int stream_size;
-{
-    struct inflate_state FAR *state;
-
-    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
-        stream_size != (int)(sizeof(z_stream)))
-        return Z_VERSION_ERROR;
-    if (strm == Z_NULL || window == Z_NULL ||
-        windowBits < 8 || windowBits > 15)
-        return Z_STREAM_ERROR;
-    strm->msg = Z_NULL;                 /* in case we return an error */
-    if (strm->zalloc == (alloc_func)0) {
-        strm->zalloc = zcalloc;
-        strm->opaque = (voidpf)0;
-    }
-    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
-    state = (struct inflate_state FAR *)ZALLOC(strm, 1,
-                                               sizeof(struct inflate_state));
-    if (state == Z_NULL) return Z_MEM_ERROR;
-    Tracev((stderr, "inflate: allocated\n"));
-    strm->state = (struct internal_state FAR *)state;
-    state->dmax = 32768U;
-    state->wbits = windowBits;
-    state->wsize = 1U << windowBits;
-    state->window = window;
-    state->wnext = 0;
-    state->whave = 0;
-    return Z_OK;
-}
-
-/*
-   Return state with length and distance decoding tables and index sizes set to
-   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
-   If BUILDFIXED is defined, then instead this routine builds the tables the
-   first time it's called, and returns those tables the first time and
-   thereafter.  This reduces the size of the code by about 2K bytes, in
-   exchange for a little execution time.  However, BUILDFIXED should not be
-   used for threaded applications, since the rewriting of the tables and virgin
-   may not be thread-safe.
- */
-local void fixedtables(state)
-struct inflate_state FAR *state;
-{
-#ifdef BUILDFIXED
-    static int virgin = 1;
-    static code *lenfix, *distfix;
-    static code fixed[544];
-
-    /* build fixed huffman tables if first call (may not be thread safe) */
-    if (virgin) {
-        unsigned sym, bits;
-        static code *next;
-
-        /* literal/length table */
-        sym = 0;
-        while (sym < 144) state->lens[sym++] = 8;
-        while (sym < 256) state->lens[sym++] = 9;
-        while (sym < 280) state->lens[sym++] = 7;
-        while (sym < 288) state->lens[sym++] = 8;
-        next = fixed;
-        lenfix = next;
-        bits = 9;
-        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
-
-        /* distance table */
-        sym = 0;
-        while (sym < 32) state->lens[sym++] = 5;
-        distfix = next;
-        bits = 5;
-        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
-
-        /* do this just once */
-        virgin = 0;
-    }
-#else /* !BUILDFIXED */
-#   include "inffixed.h"
-#endif /* BUILDFIXED */
-    state->lencode = lenfix;
-    state->lenbits = 9;
-    state->distcode = distfix;
-    state->distbits = 5;
-}
-
-/* Macros for inflateBack(): */
-
-/* Load returned state from inflate_fast() */
-#define LOAD() \
-    do { \
-        put = strm->next_out; \
-        left = strm->avail_out; \
-        next = strm->next_in; \
-        have = strm->avail_in; \
-        hold = state->hold; \
-        bits = state->bits; \
-    } while (0)
-
-/* Set state from registers for inflate_fast() */
-#define RESTORE() \
-    do { \
-        strm->next_out = put; \
-        strm->avail_out = left; \
-        strm->next_in = next; \
-        strm->avail_in = have; \
-        state->hold = hold; \
-        state->bits = bits; \
-    } while (0)
-
-/* Clear the input bit accumulator */
-#define INITBITS() \
-    do { \
-        hold = 0; \
-        bits = 0; \
-    } while (0)
-
-/* Assure that some input is available.  If input is requested, but denied,
-   then return a Z_BUF_ERROR from inflateBack(). */
-#define PULL() \
-    do { \
-        if (have == 0) { \
-            have = in(in_desc, &next); \
-            if (have == 0) { \
-                next = Z_NULL; \
-                ret = Z_BUF_ERROR; \
-                goto inf_leave; \
-            } \
-        } \
-    } while (0)
-
-/* Get a byte of input into the bit accumulator, or return from inflateBack()
-   with an error if there is no input available. */
-#define PULLBYTE() \
-    do { \
-        PULL(); \
-        have--; \
-        hold += (unsigned long)(*next++) << bits; \
-        bits += 8; \
-    } while (0)
-
-/* Assure that there are at least n bits in the bit accumulator.  If there is
-   not enough available input to do that, then return from inflateBack() with
-   an error. */
-#define NEEDBITS(n) \
-    do { \
-        while (bits < (unsigned)(n)) \
-            PULLBYTE(); \
-    } while (0)
-
-/* Return the low n bits of the bit accumulator (n < 16) */
-#define BITS(n) \
-    ((unsigned)hold & ((1U << (n)) - 1))
-
-/* Remove n bits from the bit accumulator */
-#define DROPBITS(n) \
-    do { \
-        hold >>= (n); \
-        bits -= (unsigned)(n); \
-    } while (0)
-
-/* Remove zero to seven bits as needed to go to a byte boundary */
-#define BYTEBITS() \
-    do { \
-        hold >>= bits & 7; \
-        bits -= bits & 7; \
-    } while (0)
-
-/* Assure that some output space is available, by writing out the window
-   if it's full.  If the write fails, return from inflateBack() with a
-   Z_BUF_ERROR. */
-#define ROOM() \
-    do { \
-        if (left == 0) { \
-            put = state->window; \
-            left = state->wsize; \
-            state->whave = left; \
-            if (out(out_desc, put, left)) { \
-                ret = Z_BUF_ERROR; \
-                goto inf_leave; \
-            } \
-        } \
-    } while (0)
-
-/*
-   strm provides the memory allocation functions and window buffer on input,
-   and provides information on the unused input on return.  For Z_DATA_ERROR
-   returns, strm will also provide an error message.
-
-   in() and out() are the call-back input and output functions.  When
-   inflateBack() needs more input, it calls in().  When inflateBack() has
-   filled the window with output, or when it completes with data in the
-   window, it calls out() to write out the data.  The application must not
-   change the provided input until in() is called again or inflateBack()
-   returns.  The application must not change the window/output buffer until
-   inflateBack() returns.
-
-   in() and out() are called with a descriptor parameter provided in the
-   inflateBack() call.  This parameter can be a structure that provides the
-   information required to do the read or write, as well as accumulated
-   information on the input and output such as totals and check values.
-
-   in() should return zero on failure.  out() should return non-zero on
-   failure.  If either in() or out() fails, than inflateBack() returns a
-   Z_BUF_ERROR.  strm->next_in can be checked for Z_NULL to see whether it
-   was in() or out() that caused in the error.  Otherwise,  inflateBack()
-   returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
-   error, or Z_MEM_ERROR if it could not allocate memory for the state.
-   inflateBack() can also return Z_STREAM_ERROR if the input parameters
-   are not correct, i.e. strm is Z_NULL or the state was not initialized.
- */
-int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc)
-z_streamp strm;
-in_func in;
-void FAR *in_desc;
-out_func out;
-void FAR *out_desc;
-{
-    struct inflate_state FAR *state;
-    unsigned char FAR *next;    /* next input */
-    unsigned char FAR *put;     /* next output */
-    unsigned have, left;        /* available input and output */
-    unsigned long hold;         /* bit buffer */
-    unsigned bits;              /* bits in bit buffer */
-    unsigned copy;              /* number of stored or match bytes to copy */
-    unsigned char FAR *from;    /* where to copy match bytes from */
-    code here;                  /* current decoding table entry */
-    code last;                  /* parent table entry */
-    unsigned len;               /* length to copy for repeats, bits to drop */
-    int ret;                    /* return code */
-    static const unsigned short order[19] = /* permutation of code lengths */
-        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-    /* Check that the strm exists and that the state was initialized */
-    if (strm == Z_NULL || strm->state == Z_NULL)
-        return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-
-    /* Reset the state */
-    strm->msg = Z_NULL;
-    state->mode = TYPE;
-    state->last = 0;
-    state->whave = 0;
-    next = strm->next_in;
-    have = next != Z_NULL ? strm->avail_in : 0;
-    hold = 0;
-    bits = 0;
-    put = state->window;
-    left = state->wsize;
-
-    /* Inflate until end of block marked as last */
-    for (;;)
-        switch (state->mode) {
-        case TYPE:
-            /* determine and dispatch block type */
-            if (state->last) {
-                BYTEBITS();
-                state->mode = DONE;
-                break;
-            }
-            NEEDBITS(3);
-            state->last = BITS(1);
-            DROPBITS(1);
-            switch (BITS(2)) {
-            case 0:                             /* stored block */
-                Tracev((stderr, "inflate:     stored block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = STORED;
-                break;
-            case 1:                             /* fixed block */
-                fixedtables(state);
-                Tracev((stderr, "inflate:     fixed codes block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = LEN;              /* decode codes */
-                break;
-            case 2:                             /* dynamic block */
-                Tracev((stderr, "inflate:     dynamic codes block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = TABLE;
-                break;
-            case 3:
-                strm->msg = (char *)"invalid block type";
-                state->mode = BAD;
-            }
-            DROPBITS(2);
-            break;
-
-        case STORED:
-            /* get and verify stored block length */
-            BYTEBITS();                         /* go to byte boundary */
-            NEEDBITS(32);
-            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
-                strm->msg = (char *)"invalid stored block lengths";
-                state->mode = BAD;
-                break;
-            }
-            state->length = (unsigned)hold & 0xffff;
-            Tracev((stderr, "inflate:       stored length %u\n",
-                    state->length));
-            INITBITS();
-
-            /* copy stored block from input to output */
-            while (state->length != 0) {
-                copy = state->length;
-                PULL();
-                ROOM();
-                if (copy > have) copy = have;
-                if (copy > left) copy = left;
-                zmemcpy(put, next, copy);
-                have -= copy;
-                next += copy;
-                left -= copy;
-                put += copy;
-                state->length -= copy;
-            }
-            Tracev((stderr, "inflate:       stored end\n"));
-            state->mode = TYPE;
-            break;
-
-        case TABLE:
-            /* get dynamic table entries descriptor */
-            NEEDBITS(14);
-            state->nlen = BITS(5) + 257;
-            DROPBITS(5);
-            state->ndist = BITS(5) + 1;
-            DROPBITS(5);
-            state->ncode = BITS(4) + 4;
-            DROPBITS(4);
-#ifndef PKZIP_BUG_WORKAROUND
-            if (state->nlen > 286 || state->ndist > 30) {
-                strm->msg = (char *)"too many length or distance symbols";
-                state->mode = BAD;
-                break;
-            }
-#endif
-            Tracev((stderr, "inflate:       table sizes ok\n"));
-
-            /* get code length code lengths (not a typo) */
-            state->have = 0;
-            while (state->have < state->ncode) {
-                NEEDBITS(3);
-                state->lens[order[state->have++]] = (unsigned short)BITS(3);
-                DROPBITS(3);
-            }
-            while (state->have < 19)
-                state->lens[order[state->have++]] = 0;
-            state->next = state->codes;
-            state->lencode = (code const FAR *)(state->next);
-            state->lenbits = 7;
-            ret = inflate_table(CODES, state->lens, 19, &(state->next),
-                                &(state->lenbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid code lengths set";
-                state->mode = BAD;
-                break;
-            }
-            Tracev((stderr, "inflate:       code lengths ok\n"));
-
-            /* get length and distance code code lengths */
-            state->have = 0;
-            while (state->have < state->nlen + state->ndist) {
-                for (;;) {
-                    here = state->lencode[BITS(state->lenbits)];
-                    if ((unsigned)(here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                if (here.val < 16) {
-                    NEEDBITS(here.bits);
-                    DROPBITS(here.bits);
-                    state->lens[state->have++] = here.val;
-                }
-                else {
-                    if (here.val == 16) {
-                        NEEDBITS(here.bits + 2);
-                        DROPBITS(here.bits);
-                        if (state->have == 0) {
-                            strm->msg = (char *)"invalid bit length repeat";
-                            state->mode = BAD;
-                            break;
-                        }
-                        len = (unsigned)(state->lens[state->have - 1]);
-                        copy = 3 + BITS(2);
-                        DROPBITS(2);
-                    }
-                    else if (here.val == 17) {
-                        NEEDBITS(here.bits + 3);
-                        DROPBITS(here.bits);
-                        len = 0;
-                        copy = 3 + BITS(3);
-                        DROPBITS(3);
-                    }
-                    else {
-                        NEEDBITS(here.bits + 7);
-                        DROPBITS(here.bits);
-                        len = 0;
-                        copy = 11 + BITS(7);
-                        DROPBITS(7);
-                    }
-                    if (state->have + copy > state->nlen + state->ndist) {
-                        strm->msg = (char *)"invalid bit length repeat";
-                        state->mode = BAD;
-                        break;
-                    }
-                    while (copy--)
-                        state->lens[state->have++] = (unsigned short)len;
-                }
-            }
-
-            /* handle error breaks in while */
-            if (state->mode == BAD) break;
-
-            /* check for end-of-block code (better have one) */
-            if (state->lens[256] == 0) {
-                strm->msg = (char *)"invalid code -- missing end-of-block";
-                state->mode = BAD;
-                break;
-            }
-
-            /* build code tables -- note: do not change the lenbits or distbits
-               values here (9 and 6) without reading the comments in inftrees.h
-               concerning the ENOUGH constants, which depend on those values */
-            state->next = state->codes;
-            state->lencode = (code const FAR *)(state->next);
-            state->lenbits = 9;
-            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
-                                &(state->lenbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid literal/lengths set";
-                state->mode = BAD;
-                break;
-            }
-            state->distcode = (code const FAR *)(state->next);
-            state->distbits = 6;
-            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
-                            &(state->next), &(state->distbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid distances set";
-                state->mode = BAD;
-                break;
-            }
-            Tracev((stderr, "inflate:       codes ok\n"));
-            state->mode = LEN;
-
-        case LEN:
-            /* use inflate_fast() if we have enough input and output */
-            if (have >= 6 && left >= 258) {
-                RESTORE();
-                if (state->whave < state->wsize)
-                    state->whave = state->wsize - left;
-                inflate_fast(strm, state->wsize);
-                LOAD();
-                break;
-            }
-
-            /* get a literal, length, or end-of-block code */
-            for (;;) {
-                here = state->lencode[BITS(state->lenbits)];
-                if ((unsigned)(here.bits) <= bits) break;
-                PULLBYTE();
-            }
-            if (here.op && (here.op & 0xf0) == 0) {
-                last = here;
-                for (;;) {
-                    here = state->lencode[last.val +
-                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                DROPBITS(last.bits);
-            }
-            DROPBITS(here.bits);
-            state->length = (unsigned)here.val;
-
-            /* process literal */
-            if (here.op == 0) {
-                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
-                        "inflate:         literal '%c'\n" :
-                        "inflate:         literal 0x%02x\n", here.val));
-                ROOM();
-                *put++ = (unsigned char)(state->length);
-                left--;
-                state->mode = LEN;
-                break;
-            }
-
-            /* process end of block */
-            if (here.op & 32) {
-                Tracevv((stderr, "inflate:         end of block\n"));
-                state->mode = TYPE;
-                break;
-            }
-
-            /* invalid code */
-            if (here.op & 64) {
-                strm->msg = (char *)"invalid literal/length code";
-                state->mode = BAD;
-                break;
-            }
-
-            /* length code -- get extra bits, if any */
-            state->extra = (unsigned)(here.op) & 15;
-            if (state->extra != 0) {
-                NEEDBITS(state->extra);
-                state->length += BITS(state->extra);
-                DROPBITS(state->extra);
-            }
-            Tracevv((stderr, "inflate:         length %u\n", state->length));
-
-            /* get distance code */
-            for (;;) {
-                here = state->distcode[BITS(state->distbits)];
-                if ((unsigned)(here.bits) <= bits) break;
-                PULLBYTE();
-            }
-            if ((here.op & 0xf0) == 0) {
-                last = here;
-                for (;;) {
-                    here = state->distcode[last.val +
-                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                DROPBITS(last.bits);
-            }
-            DROPBITS(here.bits);
-            if (here.op & 64) {
-                strm->msg = (char *)"invalid distance code";
-                state->mode = BAD;
-                break;
-            }
-            state->offset = (unsigned)here.val;
-
-            /* get distance extra bits, if any */
-            state->extra = (unsigned)(here.op) & 15;
-            if (state->extra != 0) {
-                NEEDBITS(state->extra);
-                state->offset += BITS(state->extra);
-                DROPBITS(state->extra);
-            }
-            if (state->offset > state->wsize - (state->whave < state->wsize ?
-                                                left : 0)) {
-                strm->msg = (char *)"invalid distance too far back";
-                state->mode = BAD;
-                break;
-            }
-            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
-
-            /* copy match from window to output */
-            do {
-                ROOM();
-                copy = state->wsize - state->offset;
-                if (copy < left) {
-                    from = put + copy;
-                    copy = left - copy;
-                }
-                else {
-                    from = put - state->offset;
-                    copy = left;
-                }
-                if (copy > state->length) copy = state->length;
-                state->length -= copy;
-                left -= copy;
-                do {
-                    *put++ = *from++;
-                } while (--copy);
-            } while (state->length != 0);
-            break;
-
-        case DONE:
-            /* inflate stream terminated properly -- write leftover output */
-            ret = Z_STREAM_END;
-            if (left < state->wsize) {
-                if (out(out_desc, state->window, state->wsize - left))
-                    ret = Z_BUF_ERROR;
-            }
-            goto inf_leave;
-
-        case BAD:
-            ret = Z_DATA_ERROR;
-            goto inf_leave;
-
-        default:                /* can't happen, but makes compilers happy */
-            ret = Z_STREAM_ERROR;
-            goto inf_leave;
-        }
-
-    /* Return unused input */
-  inf_leave:
-    strm->next_in = next;
-    strm->avail_in = have;
-    return ret;
-}
-
-int ZEXPORT inflateBackEnd(strm)
-z_streamp strm;
-{
-    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
-        return Z_STREAM_ERROR;
-    ZFREE(strm, strm->state);
-    strm->state = Z_NULL;
-    Tracev((stderr, "inflate: end\n"));
-    return Z_OK;
-}
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/inffast.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,364 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* inffast.c -- fast decoding
- * Copyright (C) 1995-2008, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "inflate.h"
-#include "inffast.h"
-
-#ifndef ASMINF
-
-/* Allow machine dependent optimization for post-increment or pre-increment.
-   Based on testing to date,
-   Pre-increment preferred for:
-   - PowerPC G3 (Adler)
-   - MIPS R5000 (Randers-Pehrson)
-   Post-increment preferred for:
-   - none
-   No measurable difference:
-   - Pentium III (Anderson)
-   - M68060 (Nikl)
- */
-#ifdef POSTINC
-#  define OFF 0
-#  define PUP(a) *(a)++
-#else
-#  define OFF 1
-#  define PUP(a) *++(a)
-#endif
-
-/*
-   Decode literal, length, and distance codes and write out the resulting
-   literal and match bytes until either not enough input or output is
-   available, an end-of-block is encountered, or a data error is encountered.
-   When large enough input and output buffers are supplied to inflate(), for
-   example, a 16K input buffer and a 64K output buffer, more than 95% of the
-   inflate execution time is spent in this routine.
-
-   Entry assumptions:
-
-        state->mode == LEN
-        strm->avail_in >= 6
-        strm->avail_out >= 258
-        start >= strm->avail_out
-        state->bits < 8
-
-   On return, state->mode is one of:
-
-        LEN -- ran out of enough output space or enough available input
-        TYPE -- reached end of block code, inflate() to interpret next block
-        BAD -- error in block data
-
-   Notes:
-
-    - The maximum input bits used by a length/distance pair is 15 bits for the
-      length code, 5 bits for the length extra, 15 bits for the distance code,
-      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
-      Therefore if strm->avail_in >= 6, then there is enough input to avoid
-      checking for available input while decoding.
-
-    - The maximum bytes that a single length/distance pair can output is 258
-      bytes, which is the maximum length that can be coded.  inflate_fast()
-      requires strm->avail_out >= 258 for each loop to avoid checking for
-      output space.
- */
-void ZLIB_INTERNAL inflate_fast(strm, start)
-z_streamp strm;
-unsigned start;         /* inflate()'s starting value for strm->avail_out */
-{
-    struct inflate_state FAR *state;
-    unsigned char FAR *in;      /* local strm->next_in */
-    unsigned char FAR *last;    /* while in < last, enough input available */
-    unsigned char FAR *out;     /* local strm->next_out */
-    unsigned char FAR *beg;     /* inflate()'s initial strm->next_out */
-    unsigned char FAR *end;     /* while out < end, enough space available */
-#ifdef INFLATE_STRICT
-    unsigned dmax;              /* maximum distance from zlib header */
-#endif
-    unsigned wsize;             /* window size or zero if not using window */
-    unsigned whave;             /* valid bytes in the window */
-    unsigned wnext;             /* window write index */
-    unsigned char FAR *window;  /* allocated sliding window, if wsize != 0 */
-    unsigned long hold;         /* local strm->hold */
-    unsigned bits;              /* local strm->bits */
-    code const FAR *lcode;      /* local strm->lencode */
-    code const FAR *dcode;      /* local strm->distcode */
-    unsigned lmask;             /* mask for first level of length codes */
-    unsigned dmask;             /* mask for first level of distance codes */
-    code here;                  /* retrieved table entry */
-    unsigned op;                /* code bits, operation, extra bits, or */
-                                /*  window position, window bytes to copy */
-    unsigned len;               /* match length, unused bytes */
-    unsigned dist;              /* match distance */
-    unsigned char FAR *from;    /* where to copy match from */
-
-    /* copy state to local variables */
-    state = (struct inflate_state FAR *)strm->state;
-    in = strm->next_in - OFF;
-    last = in + (strm->avail_in - 5);
-    out = strm->next_out - OFF;
-    beg = out - (start - strm->avail_out);
-    end = out + (strm->avail_out - 257);
-#ifdef INFLATE_STRICT
-    dmax = state->dmax;
-#endif
-    wsize = state->wsize;
-    whave = state->whave;
-    wnext = state->wnext;
-    window = state->window;
-    hold = state->hold;
-    bits = state->bits;
-    lcode = state->lencode;
-    dcode = state->distcode;
-    lmask = (1U << state->lenbits) - 1;
-    dmask = (1U << state->distbits) - 1;
-
-    /* decode literals and length/distances until end-of-block or not enough
-       input data or output space */
-    do {
-        if (bits < 15) {
-            hold += (unsigned long)(PUP(in)) << bits;
-            bits += 8;
-            hold += (unsigned long)(PUP(in)) << bits;
-            bits += 8;
-        }
-        here = lcode[hold & lmask];
-      dolen:
-        op = (unsigned)(here.bits);
-        hold >>= op;
-        bits -= op;
-        op = (unsigned)(here.op);
-        if (op == 0) {                          /* literal */
-            Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
-                    "inflate:         literal '%c'\n" :
-                    "inflate:         literal 0x%02x\n", here.val));
-            PUP(out) = (unsigned char)(here.val);
-        }
-        else if (op & 16) {                     /* length base */
-            len = (unsigned)(here.val);
-            op &= 15;                           /* number of extra bits */
-            if (op) {
-                if (bits < op) {
-                    hold += (unsigned long)(PUP(in)) << bits;
-                    bits += 8;
-                }
-                len += (unsigned)hold & ((1U << op) - 1);
-                hold >>= op;
-                bits -= op;
-            }
-            Tracevv((stderr, "inflate:         length %u\n", len));
-            if (bits < 15) {
-                hold += (unsigned long)(PUP(in)) << bits;
-                bits += 8;
-                hold += (unsigned long)(PUP(in)) << bits;
-                bits += 8;
-            }
-            here = dcode[hold & dmask];
-          dodist:
-            op = (unsigned)(here.bits);
-            hold >>= op;
-            bits -= op;
-            op = (unsigned)(here.op);
-            if (op & 16) {                      /* distance base */
-                dist = (unsigned)(here.val);
-                op &= 15;                       /* number of extra bits */
-                if (bits < op) {
-                    hold += (unsigned long)(PUP(in)) << bits;
-                    bits += 8;
-                    if (bits < op) {
-                        hold += (unsigned long)(PUP(in)) << bits;
-                        bits += 8;
-                    }
-                }
-                dist += (unsigned)hold & ((1U << op) - 1);
-#ifdef INFLATE_STRICT
-                if (dist > dmax) {
-                    strm->msg = (char *)"invalid distance too far back";
-                    state->mode = BAD;
-                    break;
-                }
-#endif
-                hold >>= op;
-                bits -= op;
-                Tracevv((stderr, "inflate:         distance %u\n", dist));
-                op = (unsigned)(out - beg);     /* max distance in output */
-                if (dist > op) {                /* see if copy from window */
-                    op = dist - op;             /* distance back in window */
-                    if (op > whave) {
-                        if (state->sane) {
-                            strm->msg =
-                                (char *)"invalid distance too far back";
-                            state->mode = BAD;
-                            break;
-                        }
-#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
-                        if (len <= op - whave) {
-                            do {
-                                PUP(out) = 0;
-                            } while (--len);
-                            continue;
-                        }
-                        len -= op - whave;
-                        do {
-                            PUP(out) = 0;
-                        } while (--op > whave);
-                        if (op == 0) {
-                            from = out - dist;
-                            do {
-                                PUP(out) = PUP(from);
-                            } while (--len);
-                            continue;
-                        }
-#endif
-                    }
-                    from = window - OFF;
-                    if (wnext == 0) {           /* very common case */
-                        from += wsize - op;
-                        if (op < len) {         /* some from window */
-                            len -= op;
-                            do {
-                                PUP(out) = PUP(from);
-                            } while (--op);
-                            from = out - dist;  /* rest from output */
-                        }
-                    }
-                    else if (wnext < op) {      /* wrap around window */
-                        from += wsize + wnext - op;
-                        op -= wnext;
-                        if (op < len) {         /* some from end of window */
-                            len -= op;
-                            do {
-                                PUP(out) = PUP(from);
-                            } while (--op);
-                            from = window - OFF;
-                            if (wnext < len) {  /* some from start of window */
-                                op = wnext;
-                                len -= op;
-                                do {
-                                    PUP(out) = PUP(from);
-                                } while (--op);
-                                from = out - dist;      /* rest from output */
-                            }
-                        }
-                    }
-                    else {                      /* contiguous in window */
-                        from += wnext - op;
-                        if (op < len) {         /* some from window */
-                            len -= op;
-                            do {
-                                PUP(out) = PUP(from);
-                            } while (--op);
-                            from = out - dist;  /* rest from output */
-                        }
-                    }
-                    while (len > 2) {
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
-                        len -= 3;
-                    }
-                    if (len) {
-                        PUP(out) = PUP(from);
-                        if (len > 1)
-                            PUP(out) = PUP(from);
-                    }
-                }
-                else {
-                    from = out - dist;          /* copy direct from output */
-                    do {                        /* minimum length is three */
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
-                        len -= 3;
-                    } while (len > 2);
-                    if (len) {
-                        PUP(out) = PUP(from);
-                        if (len > 1)
-                            PUP(out) = PUP(from);
-                    }
-                }
-            }
-            else if ((op & 64) == 0) {          /* 2nd level distance code */
-                here = dcode[here.val + (hold & ((1U << op) - 1))];
-                goto dodist;
-            }
-            else {
-                strm->msg = (char *)"invalid distance code";
-                state->mode = BAD;
-                break;
-            }
-        }
-        else if ((op & 64) == 0) {              /* 2nd level length code */
-            here = lcode[here.val + (hold & ((1U << op) - 1))];
-            goto dolen;
-        }
-        else if (op & 32) {                     /* end-of-block */
-            Tracevv((stderr, "inflate:         end of block\n"));
-            state->mode = TYPE;
-            break;
-        }
-        else {
-            strm->msg = (char *)"invalid literal/length code";
-            state->mode = BAD;
-            break;
-        }
-    } while (in < last && out < end);
-
-    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
-    len = bits >> 3;
-    in -= len;
-    bits -= len << 3;
-    hold &= (1U << bits) - 1;
-
-    /* update state and return */
-    strm->next_in = in + OFF;
-    strm->next_out = out + OFF;
-    strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
-    strm->avail_out = (unsigned)(out < end ?
-                                 257 + (end - out) : 257 - (out - end));
-    state->hold = hold;
-    state->bits = bits;
-    return;
-}
-
-/*
-   inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
-   - Using bit fields for code structure
-   - Different op definition to avoid & for extra bits (do & for table bits)
-   - Three separate decoding do-loops for direct, window, and wnext == 0
-   - Special case for distance > 1 copies to do overlapped load and store copy
-   - Explicit branch predictions (based on measured branch probabilities)
-   - Deferring match copy and interspersed it with decoding subsequent codes
-   - Swapping literal/length else
-   - Swapping window/direct else
-   - Larger unrolled copy loops (three is about right)
-   - Moving len -= 3 statement into middle of loop
- */
-
-#endif /* !ASMINF */
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/inffast.h	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,35 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-2003, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/inffixed.h	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,118 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-    /* inffixed.h -- table for decoding fixed codes
-     * Generated automatically by makefixed().
-     */
-
-    /* WARNING: this file should *not* be used by applications. It
-       is part of the implementation of the compression library and
-       is subject to change. Applications should only use zlib.h.
-     */
-
-    static const code lenfix[512] = {
-        {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
-        {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
-        {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
-        {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
-        {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
-        {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
-        {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
-        {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
-        {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
-        {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
-        {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
-        {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
-        {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
-        {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
-        {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
-        {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
-        {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
-        {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
-        {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
-        {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
-        {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
-        {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
-        {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
-        {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
-        {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
-        {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
-        {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
-        {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
-        {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
-        {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
-        {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
-        {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
-        {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
-        {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
-        {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
-        {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
-        {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
-        {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
-        {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
-        {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
-        {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
-        {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
-        {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
-        {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
-        {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
-        {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
-        {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
-        {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
-        {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
-        {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
-        {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
-        {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
-        {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
-        {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
-        {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
-        {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
-        {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
-        {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
-        {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
-        {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
-        {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
-        {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
-        {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
-        {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
-        {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
-        {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
-        {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
-        {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
-        {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
-        {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
-        {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
-        {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
-        {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
-        {0,9,255}
-    };
-
-    static const code distfix[32] = {
-        {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
-        {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
-        {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
-        {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
-        {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
-        {22,5,193},{64,5,0}
-    };
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/inflate.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1504 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* inflate.c -- zlib decompression
- * Copyright (C) 1995-2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * Change history:
- *
- * 1.2.beta0    24 Nov 2002
- * - First version -- complete rewrite of inflate to simplify code, avoid
- *   creation of window when not needed, minimize use of window when it is
- *   needed, make inffast.c even faster, implement gzip decoding, and to
- *   improve code readability and style over the previous zlib inflate code
- *
- * 1.2.beta1    25 Nov 2002
- * - Use pointers for available input and output checking in inffast.c
- * - Remove input and output counters in inffast.c
- * - Change inffast.c entry and loop from avail_in >= 7 to >= 6
- * - Remove unnecessary second byte pull from length extra in inffast.c
- * - Unroll direct copy to three copies per loop in inffast.c
- *
- * 1.2.beta2    4 Dec 2002
- * - Change external routine names to reduce potential conflicts
- * - Correct filename to inffixed.h for fixed tables in inflate.c
- * - Make hbuf[] unsigned char to match parameter type in inflate.c
- * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset)
- *   to avoid negation problem on Alphas (64 bit) in inflate.c
- *
- * 1.2.beta3    22 Dec 2002
- * - Add comments on state->bits assertion in inffast.c
- * - Add comments on op field in inftrees.h
- * - Fix bug in reuse of allocated window after inflateReset()
- * - Remove bit fields--back to byte structure for speed
- * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths
- * - Change post-increments to pre-increments in inflate_fast(), PPC biased?
- * - Add compile time option, POSTINC, to use post-increments instead (Intel?)
- * - Make MATCH copy in inflate() much faster for when inflate_fast() not used
- * - Use local copies of stream next and avail values, as well as local bit
- *   buffer and bit count in inflate()--for speed when inflate_fast() not used
- *
- * 1.2.beta4    1 Jan 2003
- * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings
- * - Move a comment on output buffer sizes from inffast.c to inflate.c
- * - Add comments in inffast.c to introduce the inflate_fast() routine
- * - Rearrange window copies in inflate_fast() for speed and simplification
- * - Unroll last copy for window match in inflate_fast()
- * - Use local copies of window variables in inflate_fast() for speed
- * - Pull out common wnext == 0 case for speed in inflate_fast()
- * - Make op and len in inflate_fast() unsigned for consistency
- * - Add FAR to lcode and dcode declarations in inflate_fast()
- * - Simplified bad distance check in inflate_fast()
- * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new
- *   source file infback.c to provide a call-back interface to inflate for
- *   programs like gzip and unzip -- uses window as output buffer to avoid
- *   window copying
- *
- * 1.2.beta5    1 Jan 2003
- * - Improved inflateBack() interface to allow the caller to provide initial
- *   input in strm.
- * - Fixed stored blocks bug in inflateBack()
- *
- * 1.2.beta6    4 Jan 2003
- * - Added comments in inffast.c on effectiveness of POSTINC
- * - Typecasting all around to reduce compiler warnings
- * - Changed loops from while (1) or do {} while (1) to for (;;), again to
- *   make compilers happy
- * - Changed type of window in inflateBackInit() to unsigned char *
- *
- * 1.2.beta7    27 Jan 2003
- * - Changed many types to unsigned or unsigned short to avoid warnings
- * - Added inflateCopy() function
- *
- * 1.2.0        9 Mar 2003
- * - Changed inflateBack() interface to provide separate opaque descriptors
- *   for the in() and out() functions
- * - Changed inflateBack() argument and in_func typedef to swap the length
- *   and buffer address return values for the input function
- * - Check next_in and next_out for Z_NULL on entry to inflate()
- *
- * The history for versions after 1.2.0 are in ChangeLog in zlib distribution.
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "inflate.h"
-#include "inffast.h"
-
-#ifdef MAKEFIXED
-#  ifndef BUILDFIXED
-#    define BUILDFIXED
-#  endif
-#endif
-
-/* function prototypes */
-local void fixedtables OF((struct inflate_state FAR *state));
-local int updatewindow OF((z_streamp strm, unsigned out));
-#ifdef BUILDFIXED
-   void makefixed OF((void));
-#endif
-local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf,
-                              unsigned len));
-
-int ZEXPORT inflateReset(strm)
-z_streamp strm;
-{
-    struct inflate_state FAR *state;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    strm->total_in = strm->total_out = state->total = 0;
-    strm->msg = Z_NULL;
-    strm->adler = 1;        /* to support ill-conceived Java test suite */
-    state->mode = HEAD;
-    state->last = 0;
-    state->havedict = 0;
-    state->dmax = 32768U;
-    state->head = Z_NULL;
-    state->wsize = 0;
-    state->whave = 0;
-    state->wnext = 0;
-    state->hold = 0;
-    state->bits = 0;
-    state->lencode = state->distcode = state->next = state->codes;
-    state->sane = 1;
-    state->back = -1;
-    Tracev((stderr, "inflate: reset\n"));
-    return Z_OK;
-}
-
-int ZEXPORT inflateReset2(strm, windowBits)
-z_streamp strm;
-int windowBits;
-{
-    int wrap;
-    struct inflate_state FAR *state;
-
-    /* get the state */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-
-    /* extract wrap request from windowBits parameter */
-    if (windowBits < 0) {
-        wrap = 0;
-        windowBits = -windowBits;
-    }
-    else {
-        wrap = (windowBits >> 4) + 1;
-#ifdef GUNZIP
-        if (windowBits < 48)
-            windowBits &= 15;
-#endif
-    }
-
-    /* set number of window bits, free window if different */
-    if (windowBits && (windowBits < 8 || windowBits > 15))
-        return Z_STREAM_ERROR;
-    if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) {
-        ZFREE(strm, state->window);
-        state->window = Z_NULL;
-    }
-
-    /* update state and reset the rest of it */
-    state->wrap = wrap;
-    state->wbits = (unsigned)windowBits;
-    return inflateReset(strm);
-}
-
-int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
-z_streamp strm;
-int windowBits;
-const char *version;
-int stream_size;
-{
-    int ret;
-    struct inflate_state FAR *state;
-
-    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
-        stream_size != (int)(sizeof(z_stream)))
-        return Z_VERSION_ERROR;
-    if (strm == Z_NULL) return Z_STREAM_ERROR;
-    strm->msg = Z_NULL;                 /* in case we return an error */
-    if (strm->zalloc == (alloc_func)0) {
-        strm->zalloc = zcalloc;
-        strm->opaque = (voidpf)0;
-    }
-    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
-    state = (struct inflate_state FAR *)
-            ZALLOC(strm, 1, sizeof(struct inflate_state));
-    if (state == Z_NULL) return Z_MEM_ERROR;
-    Tracev((stderr, "inflate: allocated\n"));
-    strm->state = (struct internal_state FAR *)state;
-    state->window = Z_NULL;
-    ret = inflateReset2(strm, windowBits);
-    if (ret != Z_OK) {
-        ZFREE(strm, state);
-        strm->state = Z_NULL;
-    }
-    return ret;
-}
-
-int ZEXPORT inflateInit_(strm, version, stream_size)
-z_streamp strm;
-const char *version;
-int stream_size;
-{
-    return inflateInit2_(strm, DEF_WBITS, version, stream_size);
-}
-
-int ZEXPORT inflatePrime(strm, bits, value)
-z_streamp strm;
-int bits;
-int value;
-{
-    struct inflate_state FAR *state;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    if (bits < 0) {
-        state->hold = 0;
-        state->bits = 0;
-        return Z_OK;
-    }
-    if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
-    value &= (1L << bits) - 1;
-    state->hold += value << state->bits;
-    state->bits += bits;
-    return Z_OK;
-}
-
-/*
-   Return state with length and distance decoding tables and index sizes set to
-   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
-   If BUILDFIXED is defined, then instead this routine builds the tables the
-   first time it's called, and returns those tables the first time and
-   thereafter.  This reduces the size of the code by about 2K bytes, in
-   exchange for a little execution time.  However, BUILDFIXED should not be
-   used for threaded applications, since the rewriting of the tables and virgin
-   may not be thread-safe.
- */
-local void fixedtables(state)
-struct inflate_state FAR *state;
-{
-#ifdef BUILDFIXED
-    static int virgin = 1;
-    static code *lenfix, *distfix;
-    static code fixed[544];
-
-    /* build fixed huffman tables if first call (may not be thread safe) */
-    if (virgin) {
-        unsigned sym, bits;
-        static code *next;
-
-        /* literal/length table */
-        sym = 0;
-        while (sym < 144) state->lens[sym++] = 8;
-        while (sym < 256) state->lens[sym++] = 9;
-        while (sym < 280) state->lens[sym++] = 7;
-        while (sym < 288) state->lens[sym++] = 8;
-        next = fixed;
-        lenfix = next;
-        bits = 9;
-        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
-
-        /* distance table */
-        sym = 0;
-        while (sym < 32) state->lens[sym++] = 5;
-        distfix = next;
-        bits = 5;
-        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
-
-        /* do this just once */
-        virgin = 0;
-    }
-#else /* !BUILDFIXED */
-#   include "inffixed.h"
-#endif /* BUILDFIXED */
-    state->lencode = lenfix;
-    state->lenbits = 9;
-    state->distcode = distfix;
-    state->distbits = 5;
-}
-
-#ifdef MAKEFIXED
-#include <stdio.h>
-
-/*
-   Write out the inffixed.h that is #include'd above.  Defining MAKEFIXED also
-   defines BUILDFIXED, so the tables are built on the fly.  makefixed() writes
-   those tables to stdout, which would be piped to inffixed.h.  A small program
-   can simply call makefixed to do this:
-
-    void makefixed(void);
-
-    int main(void)
-    {
-        makefixed();
-        return 0;
-    }
-
-   Then that can be linked with zlib built with MAKEFIXED defined and run:
-
-    a.out > inffixed.h
- */
-void makefixed()
-{
-    unsigned low, size;
-    struct inflate_state state;
-
-    fixedtables(&state);
-    puts("    /* inffixed.h -- table for decoding fixed codes");
-    puts("     * Generated automatically by makefixed().");
-    puts("     */");
-    puts("");
-    puts("    /* WARNING: this file should *not* be used by applications.");
-    puts("       It is part of the implementation of this library and is");
-    puts("       subject to change. Applications should only use zlib.h.");
-    puts("     */");
-    puts("");
-    size = 1U << 9;
-    printf("    static const code lenfix[%u] = {", size);
-    low = 0;
-    for (;;) {
-        if ((low % 7) == 0) printf("\n        ");
-        printf("{%u,%u,%d}", state.lencode[low].op, state.lencode[low].bits,
-               state.lencode[low].val);
-        if (++low == size) break;
-        putchar(',');
-    }
-    puts("\n    };");
-    size = 1U << 5;
-    printf("\n    static const code distfix[%u] = {", size);
-    low = 0;
-    for (;;) {
-        if ((low % 6) == 0) printf("\n        ");
-        printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits,
-               state.distcode[low].val);
-        if (++low == size) break;
-        putchar(',');
-    }
-    puts("\n    };");
-}
-#endif /* MAKEFIXED */
-
-/*
-   Update the window with the last wsize (normally 32K) bytes written before
-   returning.  If window does not exist yet, create it.  This is only called
-   when a window is already in use, or when output has been written during this
-   inflate call, but the end of the deflate stream has not been reached yet.
-   It is also called to create a window for dictionary data when a dictionary
-   is loaded.
-
-   Providing output buffers larger than 32K to inflate() should provide a speed
-   advantage, since only the last 32K of output is copied to the sliding window
-   upon return from inflate(), and since all distances after the first 32K of
-   output will fall in the output data, making match copies simpler and faster.
-   The advantage may be dependent on the size of the processor's data caches.
- */
-local int updatewindow(strm, out)
-z_streamp strm;
-unsigned out;
-{
-    struct inflate_state FAR *state;
-    unsigned copy, dist;
-
-    state = (struct inflate_state FAR *)strm->state;
-
-    /* if it hasn't been done already, allocate space for the window */
-    if (state->window == Z_NULL) {
-        state->window = (unsigned char FAR *)
-                        ZALLOC(strm, 1U << state->wbits,
-                               sizeof(unsigned char));
-        if (state->window == Z_NULL) return 1;
-    }
-
-    /* if window not in use yet, initialize */
-    if (state->wsize == 0) {
-        state->wsize = 1U << state->wbits;
-        state->wnext = 0;
-        state->whave = 0;
-    }
-
-    /* copy state->wsize or less output bytes into the circular window */
-    copy = out - strm->avail_out;
-    if (copy >= state->wsize) {
-        zmemcpy(state->window, strm->next_out - state->wsize, state->wsize);
-        state->wnext = 0;
-        state->whave = state->wsize;
-    }
-    else {
-        dist = state->wsize - state->wnext;
-        if (dist > copy) dist = copy;
-        zmemcpy(state->window + state->wnext, strm->next_out - copy, dist);
-        copy -= dist;
-        if (copy) {
-            zmemcpy(state->window, strm->next_out - copy, copy);
-            state->wnext = copy;
-            state->whave = state->wsize;
-        }
-        else {
-            state->wnext += dist;
-            if (state->wnext == state->wsize) state->wnext = 0;
-            if (state->whave < state->wsize) state->whave += dist;
-        }
-    }
-    return 0;
-}
-
-/* Macros for inflate(): */
-
-/* check function to use adler32() for zlib or crc32() for gzip */
-#ifdef GUNZIP
-#  define UPDATE(check, buf, len) \
-    (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
-#else
-#  define UPDATE(check, buf, len) adler32(check, buf, len)
-#endif
-
-/* check macros for header crc */
-#ifdef GUNZIP
-#  define CRC2(check, word) \
-    do { \
-        hbuf[0] = (unsigned char)(word); \
-        hbuf[1] = (unsigned char)((word) >> 8); \
-        check = crc32(check, hbuf, 2); \
-    } while (0)
-
-#  define CRC4(check, word) \
-    do { \
-        hbuf[0] = (unsigned char)(word); \
-        hbuf[1] = (unsigned char)((word) >> 8); \
-        hbuf[2] = (unsigned char)((word) >> 16); \
-        hbuf[3] = (unsigned char)((word) >> 24); \
-        check = crc32(check, hbuf, 4); \
-    } while (0)
-#endif
-
-/* Load registers with state in inflate() for speed */
-#define LOAD() \
-    do { \
-        put = strm->next_out; \
-        left = strm->avail_out; \
-        next = strm->next_in; \
-        have = strm->avail_in; \
-        hold = state->hold; \
-        bits = state->bits; \
-    } while (0)
-
-/* Restore state from registers in inflate() */
-#define RESTORE() \
-    do { \
-        strm->next_out = put; \
-        strm->avail_out = left; \
-        strm->next_in = next; \
-        strm->avail_in = have; \
-        state->hold = hold; \
-        state->bits = bits; \
-    } while (0)
-
-/* Clear the input bit accumulator */
-#define INITBITS() \
-    do { \
-        hold = 0; \
-        bits = 0; \
-    } while (0)
-
-/* Get a byte of input into the bit accumulator, or return from inflate()
-   if there is no input available. */
-#define PULLBYTE() \
-    do { \
-        if (have == 0) goto inf_leave; \
-        have--; \
-        hold += (unsigned long)(*next++) << bits; \
-        bits += 8; \
-    } while (0)
-
-/* Assure that there are at least n bits in the bit accumulator.  If there is
-   not enough available input to do that, then return from inflate(). */
-#define NEEDBITS(n) \
-    do { \
-        while (bits < (unsigned)(n)) \
-            PULLBYTE(); \
-    } while (0)
-
-/* Return the low n bits of the bit accumulator (n < 16) */
-#define BITS(n) \
-    ((unsigned)hold & ((1U << (n)) - 1))
-
-/* Remove n bits from the bit accumulator */
-#define DROPBITS(n) \
-    do { \
-        hold >>= (n); \
-        bits -= (unsigned)(n); \
-    } while (0)
-
-/* Remove zero to seven bits as needed to go to a byte boundary */
-#define BYTEBITS() \
-    do { \
-        hold >>= bits & 7; \
-        bits -= bits & 7; \
-    } while (0)
-
-/* Reverse the bytes in a 32-bit value */
-#define REVERSE(q) \
-    ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
-     (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
-
-/*
-   inflate() uses a state machine to process as much input data and generate as
-   much output data as possible before returning.  The state machine is
-   structured roughly as follows:
-
-    for (;;) switch (state) {
-    ...
-    case STATEn:
-        if (not enough input data or output space to make progress)
-            return;
-        ... make progress ...
-        state = STATEm;
-        break;
-    ...
-    }
-
-   so when inflate() is called again, the same case is attempted again, and
-   if the appropriate resources are provided, the machine proceeds to the
-   next state.  The NEEDBITS() macro is usually the way the state evaluates
-   whether it can proceed or should return.  NEEDBITS() does the return if
-   the requested bits are not available.  The typical use of the BITS macros
-   is:
-
-        NEEDBITS(n);
-        ... do something with BITS(n) ...
-        DROPBITS(n);
-
-   where NEEDBITS(n) either returns from inflate() if there isn't enough
-   input left to load n bits into the accumulator, or it continues.  BITS(n)
-   gives the low n bits in the accumulator.  When done, DROPBITS(n) drops
-   the low n bits off the accumulator.  INITBITS() clears the accumulator
-   and sets the number of available bits to zero.  BYTEBITS() discards just
-   enough bits to put the accumulator on a byte boundary.  After BYTEBITS()
-   and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
-
-   NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
-   if there is no input available.  The decoding of variable length codes uses
-   PULLBYTE() directly in order to pull just enough bytes to decode the next
-   code, and no more.
-
-   Some states loop until they get enough input, making sure that enough
-   state information is maintained to continue the loop where it left off
-   if NEEDBITS() returns in the loop.  For example, want, need, and keep
-   would all have to actually be part of the saved state in case NEEDBITS()
-   returns:
-
-    case STATEw:
-        while (want < need) {
-            NEEDBITS(n);
-            keep[want++] = BITS(n);
-            DROPBITS(n);
-        }
-        state = STATEx;
-    case STATEx:
-
-   As shown above, if the next state is also the next case, then the break
-   is omitted.
-
-   A state may also return if there is not enough output space available to
-   complete that state.  Those states are copying stored data, writing a
-   literal byte, and copying a matching string.
-
-   When returning, a "goto inf_leave" is used to update the total counters,
-   update the check value, and determine whether any progress has been made
-   during that inflate() call in order to return the proper return code.
-   Progress is defined as a change in either strm->avail_in or strm->avail_out.
-   When there is a window, goto inf_leave will update the window with the last
-   output written.  If a goto inf_leave occurs in the middle of decompression
-   and there is no window currently, goto inf_leave will create one and copy
-   output to the window for the next call of inflate().
-
-   In this implementation, the flush parameter of inflate() only affects the
-   return code (per zlib.h).  inflate() always writes as much as possible to
-   strm->next_out, given the space available and the provided input--the effect
-   documented in zlib.h of Z_SYNC_FLUSH.  Furthermore, inflate() always defers
-   the allocation of and copying into a sliding window until necessary, which
-   provides the effect documented in zlib.h for Z_FINISH when the entire input
-   stream available.  So the only thing the flush parameter actually does is:
-   when flush is set to Z_FINISH, inflate() cannot return Z_OK.  Instead it
-   will return Z_BUF_ERROR if it has not reached the end of the stream.
- */
-
-int ZEXPORT inflate(strm, flush)
-z_streamp strm;
-int flush;
-{
-    struct inflate_state FAR *state;
-    unsigned char FAR *next;    /* next input */
-    unsigned char FAR *put;     /* next output */
-    unsigned have, left;        /* available input and output */
-    unsigned long hold;         /* bit buffer */
-    unsigned bits;              /* bits in bit buffer */
-    unsigned in, out;           /* save starting available input and output */
-    unsigned copy;              /* number of stored or match bytes to copy */
-    unsigned char FAR *from;    /* where to copy match bytes from */
-    code here;                  /* current decoding table entry */
-    code last;                  /* parent table entry */
-    unsigned len;               /* length to copy for repeats, bits to drop */
-    int ret;                    /* return code */
-#ifdef GUNZIP
-    unsigned char hbuf[4];      /* buffer for gzip header crc calculation */
-#endif
-    static const unsigned short order[19] = /* permutation of code lengths */
-        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-    if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL ||
-        (strm->next_in == Z_NULL && strm->avail_in != 0))
-        return Z_STREAM_ERROR;
-
-    state = (struct inflate_state FAR *)strm->state;
-    if (state->mode == TYPE) state->mode = TYPEDO;      /* skip check */
-    LOAD();
-    in = have;
-    out = left;
-    ret = Z_OK;
-    for (;;)
-        switch (state->mode) {
-        case HEAD:
-            if (state->wrap == 0) {
-                state->mode = TYPEDO;
-                break;
-            }
-            NEEDBITS(16);
-#ifdef GUNZIP
-            if ((state->wrap & 2) && hold == 0x8b1f) {  /* gzip header */
-                state->check = crc32(0L, Z_NULL, 0);
-                CRC2(state->check, hold);
-                INITBITS();
-                state->mode = FLAGS;
-                break;
-            }
-            state->flags = 0;           /* expect zlib header */
-            if (state->head != Z_NULL)
-                state->head->done = -1;
-            if (!(state->wrap & 1) ||   /* check if zlib header allowed */
-#else
-            if (
-#endif
-                ((BITS(8) << 8) + (hold >> 8)) % 31) {
-                strm->msg = (char *)"incorrect header check";
-                state->mode = BAD;
-                break;
-            }
-            if (BITS(4) != Z_DEFLATED) {
-                strm->msg = (char *)"unknown compression method";
-                state->mode = BAD;
-                break;
-            }
-            DROPBITS(4);
-            len = BITS(4) + 8;
-            if (state->wbits == 0)
-                state->wbits = len;
-            else if (len > state->wbits) {
-                strm->msg = (char *)"invalid window size";
-                state->mode = BAD;
-                break;
-            }
-            state->dmax = 1U << len;
-            Tracev((stderr, "inflate:   zlib header ok\n"));
-            strm->adler = state->check = adler32(0L, Z_NULL, 0);
-            state->mode = hold & 0x200 ? DICTID : TYPE;
-            INITBITS();
-            break;
-#ifdef GUNZIP
-        case FLAGS:
-            NEEDBITS(16);
-            state->flags = (int)(hold);
-            if ((state->flags & 0xff) != Z_DEFLATED) {
-                strm->msg = (char *)"unknown compression method";
-                state->mode = BAD;
-                break;
-            }
-            if (state->flags & 0xe000) {
-                strm->msg = (char *)"unknown header flags set";
-                state->mode = BAD;
-                break;
-            }
-            if (state->head != Z_NULL)
-                state->head->text = (int)((hold >> 8) & 1);
-            if (state->flags & 0x0200) CRC2(state->check, hold);
-            INITBITS();
-            state->mode = TIME;
-        case TIME:
-            NEEDBITS(32);
-            if (state->head != Z_NULL)
-                state->head->time = hold;
-            if (state->flags & 0x0200) CRC4(state->check, hold);
-            INITBITS();
-            state->mode = OS;
-        case OS:
-            NEEDBITS(16);
-            if (state->head != Z_NULL) {
-                state->head->xflags = (int)(hold & 0xff);
-                state->head->os = (int)(hold >> 8);
-            }
-            if (state->flags & 0x0200) CRC2(state->check, hold);
-            INITBITS();
-            state->mode = EXLEN;
-        case EXLEN:
-            if (state->flags & 0x0400) {
-                NEEDBITS(16);
-                state->length = (unsigned)(hold);
-                if (state->head != Z_NULL)
-                    state->head->extra_len = (unsigned)hold;
-                if (state->flags & 0x0200) CRC2(state->check, hold);
-                INITBITS();
-            }
-            else if (state->head != Z_NULL)
-                state->head->extra = Z_NULL;
-            state->mode = EXTRA;
-        case EXTRA:
-            if (state->flags & 0x0400) {
-                copy = state->length;
-                if (copy > have) copy = have;
-                if (copy) {
-                    if (state->head != Z_NULL &&
-                        state->head->extra != Z_NULL) {
-                        len = state->head->extra_len - state->length;
-                        zmemcpy(state->head->extra + len, next,
-                                len + copy > state->head->extra_max ?
-                                state->head->extra_max - len : copy);
-                    }
-                    if (state->flags & 0x0200)
-                        state->check = crc32(state->check, next, copy);
-                    have -= copy;
-                    next += copy;
-                    state->length -= copy;
-                }
-                if (state->length) goto inf_leave;
-            }
-            state->length = 0;
-            state->mode = NAME;
-        case NAME:
-            if (state->flags & 0x0800) {
-                if (have == 0) goto inf_leave;
-                copy = 0;
-                do {
-                    len = (unsigned)(next[copy++]);
-                    if (state->head != Z_NULL &&
-                            state->head->name != Z_NULL &&
-                            state->length < state->head->name_max)
-                        state->head->name[state->length++] = len;
-                } while (len && copy < have);
-                if (state->flags & 0x0200)
-                    state->check = crc32(state->check, next, copy);
-                have -= copy;
-                next += copy;
-                if (len) goto inf_leave;
-            }
-            else if (state->head != Z_NULL)
-                state->head->name = Z_NULL;
-            state->length = 0;
-            state->mode = COMMENT;
-        case COMMENT:
-            if (state->flags & 0x1000) {
-                if (have == 0) goto inf_leave;
-                copy = 0;
-                do {
-                    len = (unsigned)(next[copy++]);
-                    if (state->head != Z_NULL &&
-                            state->head->comment != Z_NULL &&
-                            state->length < state->head->comm_max)
-                        state->head->comment[state->length++] = len;
-                } while (len && copy < have);
-                if (state->flags & 0x0200)
-                    state->check = crc32(state->check, next, copy);
-                have -= copy;
-                next += copy;
-                if (len) goto inf_leave;
-            }
-            else if (state->head != Z_NULL)
-                state->head->comment = Z_NULL;
-            state->mode = HCRC;
-        case HCRC:
-            if (state->flags & 0x0200) {
-                NEEDBITS(16);
-                if (hold != (state->check & 0xffff)) {
-                    strm->msg = (char *)"header crc mismatch";
-                    state->mode = BAD;
-                    break;
-                }
-                INITBITS();
-            }
-            if (state->head != Z_NULL) {
-                state->head->hcrc = (int)((state->flags >> 9) & 1);
-                state->head->done = 1;
-            }
-            strm->adler = state->check = crc32(0L, Z_NULL, 0);
-            state->mode = TYPE;
-            break;
-#endif
-        case DICTID:
-            NEEDBITS(32);
-            strm->adler = state->check = REVERSE(hold);
-            INITBITS();
-            state->mode = DICT;
-        case DICT:
-            if (state->havedict == 0) {
-                RESTORE();
-                return Z_NEED_DICT;
-            }
-            strm->adler = state->check = adler32(0L, Z_NULL, 0);
-            state->mode = TYPE;
-        case TYPE:
-            if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave;
-        case TYPEDO:
-            if (state->last) {
-                BYTEBITS();
-                state->mode = CHECK;
-                break;
-            }
-            NEEDBITS(3);
-            state->last = BITS(1);
-            DROPBITS(1);
-            switch (BITS(2)) {
-            case 0:                             /* stored block */
-                Tracev((stderr, "inflate:     stored block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = STORED;
-                break;
-            case 1:                             /* fixed block */
-                fixedtables(state);
-                Tracev((stderr, "inflate:     fixed codes block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = LEN_;             /* decode codes */
-                if (flush == Z_TREES) {
-                    DROPBITS(2);
-                    goto inf_leave;
-                }
-                break;
-            case 2:                             /* dynamic block */
-                Tracev((stderr, "inflate:     dynamic codes block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = TABLE;
-                break;
-            case 3:
-                strm->msg = (char *)"invalid block type";
-                state->mode = BAD;
-            }
-            DROPBITS(2);
-            break;
-        case STORED:
-            BYTEBITS();                         /* go to byte boundary */
-            NEEDBITS(32);
-            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
-                strm->msg = (char *)"invalid stored block lengths";
-                state->mode = BAD;
-                break;
-            }
-            state->length = (unsigned)hold & 0xffff;
-            Tracev((stderr, "inflate:       stored length %u\n",
-                    state->length));
-            INITBITS();
-            state->mode = COPY_;
-            if (flush == Z_TREES) goto inf_leave;
-        case COPY_:
-            state->mode = COPY;
-        case COPY:
-            copy = state->length;
-            if (copy) {
-                if (copy > have) copy = have;
-                if (copy > left) copy = left;
-                if (copy == 0) goto inf_leave;
-                zmemcpy(put, next, copy);
-                have -= copy;
-                next += copy;
-                left -= copy;
-                put += copy;
-                state->length -= copy;
-                break;
-            }
-            Tracev((stderr, "inflate:       stored end\n"));
-            state->mode = TYPE;
-            break;
-        case TABLE:
-            NEEDBITS(14);
-            state->nlen = BITS(5) + 257;
-            DROPBITS(5);
-            state->ndist = BITS(5) + 1;
-            DROPBITS(5);
-            state->ncode = BITS(4) + 4;
-            DROPBITS(4);
-#ifndef PKZIP_BUG_WORKAROUND
-            if (state->nlen > 286 || state->ndist > 30) {
-                strm->msg = (char *)"too many length or distance symbols";
-                state->mode = BAD;
-                break;
-            }
-#endif
-            Tracev((stderr, "inflate:       table sizes ok\n"));
-            state->have = 0;
-            state->mode = LENLENS;
-        case LENLENS:
-            while (state->have < state->ncode) {
-                NEEDBITS(3);
-                state->lens[order[state->have++]] = (unsigned short)BITS(3);
-                DROPBITS(3);
-            }
-            while (state->have < 19)
-                state->lens[order[state->have++]] = 0;
-            state->next = state->codes;
-            state->lencode = (code const FAR *)(state->next);
-            state->lenbits = 7;
-            ret = inflate_table(CODES, state->lens, 19, &(state->next),
-                                &(state->lenbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid code lengths set";
-                state->mode = BAD;
-                break;
-            }
-            Tracev((stderr, "inflate:       code lengths ok\n"));
-            state->have = 0;
-            state->mode = CODELENS;
-        case CODELENS:
-            while (state->have < state->nlen + state->ndist) {
-                for (;;) {
-                    here = state->lencode[BITS(state->lenbits)];
-                    if ((unsigned)(here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                if (here.val < 16) {
-                    NEEDBITS(here.bits);
-                    DROPBITS(here.bits);
-                    state->lens[state->have++] = here.val;
-                }
-                else {
-                    if (here.val == 16) {
-                        NEEDBITS(here.bits + 2);
-                        DROPBITS(here.bits);
-                        if (state->have == 0) {
-                            strm->msg = (char *)"invalid bit length repeat";
-                            state->mode = BAD;
-                            break;
-                        }
-                        len = state->lens[state->have - 1];
-                        copy = 3 + BITS(2);
-                        DROPBITS(2);
-                    }
-                    else if (here.val == 17) {
-                        NEEDBITS(here.bits + 3);
-                        DROPBITS(here.bits);
-                        len = 0;
-                        copy = 3 + BITS(3);
-                        DROPBITS(3);
-                    }
-                    else {
-                        NEEDBITS(here.bits + 7);
-                        DROPBITS(here.bits);
-                        len = 0;
-                        copy = 11 + BITS(7);
-                        DROPBITS(7);
-                    }
-                    if (state->have + copy > state->nlen + state->ndist) {
-                        strm->msg = (char *)"invalid bit length repeat";
-                        state->mode = BAD;
-                        break;
-                    }
-                    while (copy--)
-                        state->lens[state->have++] = (unsigned short)len;
-                }
-            }
-
-            /* handle error breaks in while */
-            if (state->mode == BAD) break;
-
-            /* check for end-of-block code (better have one) */
-            if (state->lens[256] == 0) {
-                strm->msg = (char *)"invalid code -- missing end-of-block";
-                state->mode = BAD;
-                break;
-            }
-
-            /* build code tables -- note: do not change the lenbits or distbits
-               values here (9 and 6) without reading the comments in inftrees.h
-               concerning the ENOUGH constants, which depend on those values */
-            state->next = state->codes;
-            state->lencode = (code const FAR *)(state->next);
-            state->lenbits = 9;
-            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
-                                &(state->lenbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid literal/lengths set";
-                state->mode = BAD;
-                break;
-            }
-            state->distcode = (code const FAR *)(state->next);
-            state->distbits = 6;
-            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
-                            &(state->next), &(state->distbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid distances set";
-                state->mode = BAD;
-                break;
-            }
-            Tracev((stderr, "inflate:       codes ok\n"));
-            state->mode = LEN_;
-            if (flush == Z_TREES) goto inf_leave;
-        case LEN_:
-            state->mode = LEN;
-        case LEN:
-            if (have >= 6 && left >= 258) {
-                RESTORE();
-                inflate_fast(strm, out);
-                LOAD();
-                if (state->mode == TYPE)
-                    state->back = -1;
-                break;
-            }
-            state->back = 0;
-            for (;;) {
-                here = state->lencode[BITS(state->lenbits)];
-                if ((unsigned)(here.bits) <= bits) break;
-                PULLBYTE();
-            }
-            if (here.op && (here.op & 0xf0) == 0) {
-                last = here;
-                for (;;) {
-                    here = state->lencode[last.val +
-                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                DROPBITS(last.bits);
-                state->back += last.bits;
-            }
-            DROPBITS(here.bits);
-            state->back += here.bits;
-            state->length = (unsigned)here.val;
-            if ((int)(here.op) == 0) {
-                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
-                        "inflate:         literal '%c'\n" :
-                        "inflate:         literal 0x%02x\n", here.val));
-                state->mode = LIT;
-                break;
-            }
-            if (here.op & 32) {
-                Tracevv((stderr, "inflate:         end of block\n"));
-                state->back = -1;
-                state->mode = TYPE;
-                break;
-            }
-            if (here.op & 64) {
-                strm->msg = (char *)"invalid literal/length code";
-                state->mode = BAD;
-                break;
-            }
-            state->extra = (unsigned)(here.op) & 15;
-            state->mode = LENEXT;
-        case LENEXT:
-            if (state->extra) {
-                NEEDBITS(state->extra);
-                state->length += BITS(state->extra);
-                DROPBITS(state->extra);
-                state->back += state->extra;
-            }
-            Tracevv((stderr, "inflate:         length %u\n", state->length));
-            state->was = state->length;
-            state->mode = DIST;
-        case DIST:
-            for (;;) {
-                here = state->distcode[BITS(state->distbits)];
-                if ((unsigned)(here.bits) <= bits) break;
-                PULLBYTE();
-            }
-            if ((here.op & 0xf0) == 0) {
-                last = here;
-                for (;;) {
-                    here = state->distcode[last.val +
-                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                DROPBITS(last.bits);
-                state->back += last.bits;
-            }
-            DROPBITS(here.bits);
-            state->back += here.bits;
-            if (here.op & 64) {
-                strm->msg = (char *)"invalid distance code";
-                state->mode = BAD;
-                break;
-            }
-            state->offset = (unsigned)here.val;
-            state->extra = (unsigned)(here.op) & 15;
-            state->mode = DISTEXT;
-        case DISTEXT:
-            if (state->extra) {
-                NEEDBITS(state->extra);
-                state->offset += BITS(state->extra);
-                DROPBITS(state->extra);
-                state->back += state->extra;
-            }
-#ifdef INFLATE_STRICT
-            if (state->offset > state->dmax) {
-                strm->msg = (char *)"invalid distance too far back";
-                state->mode = BAD;
-                break;
-            }
-#endif
-            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
-            state->mode = MATCH;
-        case MATCH:
-            if (left == 0) goto inf_leave;
-            copy = out - left;
-            if (state->offset > copy) {         /* copy from window */
-                copy = state->offset - copy;
-                if (copy > state->whave) {
-                    if (state->sane) {
-                        strm->msg = (char *)"invalid distance too far back";
-                        state->mode = BAD;
-                        break;
-                    }
-#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
-                    Trace((stderr, "inflate.c too far\n"));
-                    copy -= state->whave;
-                    if (copy > state->length) copy = state->length;
-                    if (copy > left) copy = left;
-                    left -= copy;
-                    state->length -= copy;
-                    do {
-                        *put++ = 0;
-                    } while (--copy);
-                    if (state->length == 0) state->mode = LEN;
-                    break;
-#endif
-                }
-                if (copy > state->wnext) {
-                    copy -= state->wnext;
-                    from = state->window + (state->wsize - copy);
-                }
-                else
-                    from = state->window + (state->wnext - copy);
-                if (copy > state->length) copy = state->length;
-            }
-            else {                              /* copy from output */
-                from = put - state->offset;
-                copy = state->length;
-            }
-            if (copy > left) copy = left;
-            left -= copy;
-            state->length -= copy;
-            do {
-                *put++ = *from++;
-            } while (--copy);
-            if (state->length == 0) state->mode = LEN;
-            break;
-        case LIT:
-            if (left == 0) goto inf_leave;
-            *put++ = (unsigned char)(state->length);
-            left--;
-            state->mode = LEN;
-            break;
-        case CHECK:
-            if (state->wrap) {
-                NEEDBITS(32);
-                out -= left;
-                strm->total_out += out;
-                state->total += out;
-                if (out)
-                    strm->adler = state->check =
-                        UPDATE(state->check, put - out, out);
-                out = left;
-                if ((
-#ifdef GUNZIP
-                     state->flags ? hold :
-#endif
-                     REVERSE(hold)) != state->check) {
-                    strm->msg = (char *)"incorrect data check";
-                    state->mode = BAD;
-                    break;
-                }
-                INITBITS();
-                Tracev((stderr, "inflate:   check matches trailer\n"));
-            }
-#ifdef GUNZIP
-            state->mode = LENGTH;
-        case LENGTH:
-            if (state->wrap && state->flags) {
-                NEEDBITS(32);
-                if (hold != (state->total & 0xffffffffUL)) {
-                    strm->msg = (char *)"incorrect length check";
-                    state->mode = BAD;
-                    break;
-                }
-                INITBITS();
-                Tracev((stderr, "inflate:   length matches trailer\n"));
-            }
-#endif
-            state->mode = DONE;
-        case DONE:
-            ret = Z_STREAM_END;
-            goto inf_leave;
-        case BAD:
-            ret = Z_DATA_ERROR;
-            goto inf_leave;
-        case MEM:
-            return Z_MEM_ERROR;
-        case SYNC:
-        default:
-            return Z_STREAM_ERROR;
-        }
-
-    /*
-       Return from inflate(), updating the total counts and the check value.
-       If there was no progress during the inflate() call, return a buffer
-       error.  Call updatewindow() to create and/or update the window state.
-       Note: a memory error from inflate() is non-recoverable.
-     */
-  inf_leave:
-    RESTORE();
-    if (state->wsize || (state->mode < CHECK && out != strm->avail_out))
-        if (updatewindow(strm, out)) {
-            state->mode = MEM;
-            return Z_MEM_ERROR;
-        }
-    in -= strm->avail_in;
-    out -= strm->avail_out;
-    strm->total_in += in;
-    strm->total_out += out;
-    state->total += out;
-    if (state->wrap && out)
-        strm->adler = state->check =
-            UPDATE(state->check, strm->next_out - out, out);
-    strm->data_type = state->bits + (state->last ? 64 : 0) +
-                      (state->mode == TYPE ? 128 : 0) +
-                      (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
-    if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
-        ret = Z_BUF_ERROR;
-    return ret;
-}
-
-int ZEXPORT inflateEnd(strm)
-z_streamp strm;
-{
-    struct inflate_state FAR *state;
-    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
-        return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    if (state->window != Z_NULL) ZFREE(strm, state->window);
-    ZFREE(strm, strm->state);
-    strm->state = Z_NULL;
-    Tracev((stderr, "inflate: end\n"));
-    return Z_OK;
-}
-
-int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
-z_streamp strm;
-const Bytef *dictionary;
-uInt dictLength;
-{
-    struct inflate_state FAR *state;
-    unsigned long id;
-
-    /* check state */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    if (state->wrap != 0 && state->mode != DICT)
-        return Z_STREAM_ERROR;
-
-    /* check for correct dictionary id */
-    if (state->mode == DICT) {
-        id = adler32(0L, Z_NULL, 0);
-        id = adler32(id, dictionary, dictLength);
-        if (id != state->check)
-            return Z_DATA_ERROR;
-    }
-
-    /* copy dictionary to window */
-    if (updatewindow(strm, strm->avail_out)) {
-        state->mode = MEM;
-        return Z_MEM_ERROR;
-    }
-    if (dictLength > state->wsize) {
-        zmemcpy(state->window, dictionary + dictLength - state->wsize,
-                state->wsize);
-        state->whave = state->wsize;
-    }
-    else {
-        zmemcpy(state->window + state->wsize - dictLength, dictionary,
-                dictLength);
-        state->whave = dictLength;
-    }
-    state->havedict = 1;
-    Tracev((stderr, "inflate:   dictionary set\n"));
-    return Z_OK;
-}
-
-int ZEXPORT inflateGetHeader(strm, head)
-z_streamp strm;
-gz_headerp head;
-{
-    struct inflate_state FAR *state;
-
-    /* check state */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
-
-    /* save header structure */
-    state->head = head;
-    head->done = 0;
-    return Z_OK;
-}
-
-/*
-   Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff.  Return when found
-   or when out of input.  When called, *have is the number of pattern bytes
-   found in order so far, in 0..3.  On return *have is updated to the new
-   state.  If on return *have equals four, then the pattern was found and the
-   return value is how many bytes were read including the last byte of the
-   pattern.  If *have is less than four, then the pattern has not been found
-   yet and the return value is len.  In the latter case, syncsearch() can be
-   called again with more data and the *have state.  *have is initialized to
-   zero for the first call.
- */
-local unsigned syncsearch(have, buf, len)
-unsigned FAR *have;
-unsigned char FAR *buf;
-unsigned len;
-{
-    unsigned got;
-    unsigned next;
-
-    got = *have;
-    next = 0;
-    while (next < len && got < 4) {
-        if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
-            got++;
-        else if (buf[next])
-            got = 0;
-        else
-            got = 4 - got;
-        next++;
-    }
-    *have = got;
-    return next;
-}
-
-int ZEXPORT inflateSync(strm)
-z_streamp strm;
-{
-    unsigned len;               /* number of bytes to look at or looked at */
-    unsigned long in, out;      /* temporary to save total_in and total_out */
-    unsigned char buf[4];       /* to restore bit buffer to byte string */
-    struct inflate_state FAR *state;
-
-    /* check parameters */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
-
-    /* if first time, start search in bit buffer */
-    if (state->mode != SYNC) {
-        state->mode = SYNC;
-        state->hold <<= state->bits & 7;
-        state->bits -= state->bits & 7;
-        len = 0;
-        while (state->bits >= 8) {
-            buf[len++] = (unsigned char)(state->hold);
-            state->hold >>= 8;
-            state->bits -= 8;
-        }
-        state->have = 0;
-        syncsearch(&(state->have), buf, len);
-    }
-
-    /* search available input */
-    len = syncsearch(&(state->have), strm->next_in, strm->avail_in);
-    strm->avail_in -= len;
-    strm->next_in += len;
-    strm->total_in += len;
-
-    /* return no joy or set up to restart inflate() on a new block */
-    if (state->have != 4) return Z_DATA_ERROR;
-    in = strm->total_in;  out = strm->total_out;
-    inflateReset(strm);
-    strm->total_in = in;  strm->total_out = out;
-    state->mode = TYPE;
-    return Z_OK;
-}
-
-/*
-   Returns true if inflate is currently at the end of a block generated by
-   Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
-   implementation to provide an additional safety check. PPP uses
-   Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
-   block. When decompressing, PPP checks that at the end of input packet,
-   inflate is waiting for these length bytes.
- */
-int ZEXPORT inflateSyncPoint(strm)
-z_streamp strm;
-{
-    struct inflate_state FAR *state;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    return state->mode == STORED && state->bits == 0;
-}
-
-int ZEXPORT inflateCopy(dest, source)
-z_streamp dest;
-z_streamp source;
-{
-    struct inflate_state FAR *state;
-    struct inflate_state FAR *copy;
-    unsigned char FAR *window;
-    unsigned wsize;
-
-    /* check input */
-    if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL ||
-        source->zalloc == (alloc_func)0 || source->zfree == (free_func)0)
-        return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)source->state;
-
-    /* allocate space */
-    copy = (struct inflate_state FAR *)
-           ZALLOC(source, 1, sizeof(struct inflate_state));
-    if (copy == Z_NULL) return Z_MEM_ERROR;
-    window = Z_NULL;
-    if (state->window != Z_NULL) {
-        window = (unsigned char FAR *)
-                 ZALLOC(source, 1U << state->wbits, sizeof(unsigned char));
-        if (window == Z_NULL) {
-            ZFREE(source, copy);
-            return Z_MEM_ERROR;
-        }
-    }
-
-    /* copy state */
-    zmemcpy(dest, source, sizeof(z_stream));
-    zmemcpy(copy, state, sizeof(struct inflate_state));
-    if (state->lencode >= state->codes &&
-        state->lencode <= state->codes + ENOUGH - 1) {
-        copy->lencode = copy->codes + (state->lencode - state->codes);
-        copy->distcode = copy->codes + (state->distcode - state->codes);
-    }
-    copy->next = copy->codes + (state->next - state->codes);
-    if (window != Z_NULL) {
-        wsize = 1U << state->wbits;
-        zmemcpy(window, state->window, wsize);
-    }
-    copy->window = window;
-    dest->state = (struct internal_state FAR *)copy;
-    return Z_OK;
-}
-
-int ZEXPORT inflateUndermine(strm, subvert)
-z_streamp strm;
-int subvert;
-{
-    struct inflate_state FAR *state;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    state->sane = !subvert;
-#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
-    return Z_OK;
-#else
-    state->sane = 1;
-    return Z_DATA_ERROR;
-#endif
-}
-
-long ZEXPORT inflateMark(strm)
-z_streamp strm;
-{
-    struct inflate_state FAR *state;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return -1L << 16;
-    state = (struct inflate_state FAR *)strm->state;
-    return ((long)(state->back) << 16) +
-        (state->mode == COPY ? state->length :
-            (state->mode == MATCH ? state->was - state->length : 0));
-}
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/inflate.h	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,146 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* inflate.h -- internal inflate state definition
- * Copyright (C) 1995-2009 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* define NO_GZIP when compiling if you want to disable gzip header and
-   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in
-   the crc code when it is not needed.  For shared libraries, gzip decoding
-   should be left enabled. */
-#ifndef NO_GZIP
-#  define GUNZIP
-#endif
-
-/* Possible inflate modes between inflate() calls */
-typedef enum {
-    HEAD,       /* i: waiting for magic header */
-    FLAGS,      /* i: waiting for method and flags (gzip) */
-    TIME,       /* i: waiting for modification time (gzip) */
-    OS,         /* i: waiting for extra flags and operating system (gzip) */
-    EXLEN,      /* i: waiting for extra length (gzip) */
-    EXTRA,      /* i: waiting for extra bytes (gzip) */
-    NAME,       /* i: waiting for end of file name (gzip) */
-    COMMENT,    /* i: waiting for end of comment (gzip) */
-    HCRC,       /* i: waiting for header crc (gzip) */
-    DICTID,     /* i: waiting for dictionary check value */
-    DICT,       /* waiting for inflateSetDictionary() call */
-        TYPE,       /* i: waiting for type bits, including last-flag bit */
-        TYPEDO,     /* i: same, but skip check to exit inflate on new block */
-        STORED,     /* i: waiting for stored size (length and complement) */
-        COPY_,      /* i/o: same as COPY below, but only first time in */
-        COPY,       /* i/o: waiting for input or output to copy stored block */
-        TABLE,      /* i: waiting for dynamic block table lengths */
-        LENLENS,    /* i: waiting for code length code lengths */
-        CODELENS,   /* i: waiting for length/lit and distance code lengths */
-            LEN_,       /* i: same as LEN below, but only first time in */
-            LEN,        /* i: waiting for length/lit/eob code */
-            LENEXT,     /* i: waiting for length extra bits */
-            DIST,       /* i: waiting for distance code */
-            DISTEXT,    /* i: waiting for distance extra bits */
-            MATCH,      /* o: waiting for output space to copy string */
-            LIT,        /* o: waiting for output space to write literal */
-    CHECK,      /* i: waiting for 32-bit check value */
-    LENGTH,     /* i: waiting for 32-bit length (gzip) */
-    DONE,       /* finished check, done -- remain here until reset */
-    BAD,        /* got a data error -- remain here until reset */
-    MEM,        /* got an inflate() memory error -- remain here until reset */
-    SYNC        /* looking for synchronization bytes to restart inflate() */
-} inflate_mode;
-
-/*
-    State transitions between above modes -
-
-    (most modes can go to BAD or MEM on error -- not shown for clarity)
-
-    Process header:
-        HEAD -> (gzip) or (zlib) or (raw)
-        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
-                  HCRC -> TYPE
-        (zlib) -> DICTID or TYPE
-        DICTID -> DICT -> TYPE
-        (raw) -> TYPEDO
-    Read deflate blocks:
-            TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
-            STORED -> COPY_ -> COPY -> TYPE
-            TABLE -> LENLENS -> CODELENS -> LEN_
-            LEN_ -> LEN
-    Read deflate codes in fixed or dynamic block:
-                LEN -> LENEXT or LIT or TYPE
-                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
-                LIT -> LEN
-    Process trailer:
-        CHECK -> LENGTH -> DONE
- */
-
-/* state maintained between inflate() calls.  Approximately 10K bytes. */
-struct inflate_state {
-    inflate_mode mode;          /* current inflate mode */
-    int last;                   /* true if processing last block */
-    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip */
-    int havedict;               /* true if dictionary provided */
-    int flags;                  /* gzip header method and flags (0 if zlib) */
-    unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
-    unsigned long check;        /* protected copy of check value */
-    unsigned long total;        /* protected copy of output count */
-    gz_headerp head;            /* where to save gzip header information */
-        /* sliding window */
-    unsigned wbits;             /* log base 2 of requested window size */
-    unsigned wsize;             /* window size or zero if not using window */
-    unsigned whave;             /* valid bytes in the window */
-    unsigned wnext;             /* window write index */
-    unsigned char FAR *window;  /* allocated sliding window, if needed */
-        /* bit accumulator */
-    unsigned long hold;         /* input bit accumulator */
-    unsigned bits;              /* number of bits in "in" */
-        /* for string and stored block copying */
-    unsigned length;            /* literal or length of data to copy */
-    unsigned offset;            /* distance back to copy string from */
-        /* for table and code decoding */
-    unsigned extra;             /* extra bits needed */
-        /* fixed and dynamic code tables */
-    code const FAR *lencode;    /* starting table for length/literal codes */
-    code const FAR *distcode;   /* starting table for distance codes */
-    unsigned lenbits;           /* index bits for lencode */
-    unsigned distbits;          /* index bits for distcode */
-        /* dynamic table building */
-    unsigned ncode;             /* number of code length code lengths */
-    unsigned nlen;              /* number of length code lengths */
-    unsigned ndist;             /* number of distance code lengths */
-    unsigned have;              /* number of code lengths in lens[] */
-    code FAR *next;             /* next available space in codes[] */
-    unsigned short lens[320];   /* temporary storage for code lengths */
-    unsigned short work[288];   /* work area for code table building */
-    code codes[ENOUGH];         /* space for code tables */
-    int sane;                   /* if false, allow invalid distance too far */
-    int back;                   /* bits back of last unprocessed length/lit */
-    unsigned was;               /* initial length of match */
-};
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/inftrees.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,354 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-
-#define MAXBITS 15
-
-const char inflate_copyright[] =
-   " inflate 1.2.5 Copyright 1995-2010 Mark Adler ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-/*
-   Build a set of tables to decode the provided canonical Huffman code.
-   The code lengths are lens[0..codes-1].  The result starts at *table,
-   whose indices are 0..2^bits-1.  work is a writable array of at least
-   lens shorts, which is used as a work area.  type is the type of code
-   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
-   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
-   on return points to the next available entry's address.  bits is the
-   requested root table index bits, and on return it is the actual root
-   table index bits.  It will differ if the request is greater than the
-   longest code or if it is less than the shortest code.
- */
-int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
-codetype type;
-unsigned short FAR *lens;
-unsigned codes;
-code FAR * FAR *table;
-unsigned FAR *bits;
-unsigned short FAR *work;
-{
-    unsigned len;               /* a code's length in bits */
-    unsigned sym;               /* index of code symbols */
-    unsigned min, max;          /* minimum and maximum code lengths */
-    unsigned root;              /* number of index bits for root table */
-    unsigned curr;              /* number of index bits for current table */
-    unsigned drop;              /* code bits to drop for sub-table */
-    int left;                   /* number of prefix codes available */
-    unsigned used;              /* code entries in table used */
-    unsigned huff;              /* Huffman code */
-    unsigned incr;              /* for incrementing code, index */
-    unsigned fill;              /* index for replicating entries */
-    unsigned low;               /* low bits for current root entry */
-    unsigned mask;              /* mask for low root bits */
-    code here;                  /* table entry for duplication */
-    code FAR *next;             /* next available space in table */
-    const unsigned short FAR *base;     /* base value table to use */
-    const unsigned short FAR *extra;    /* extra bits table to use */
-    int end;                    /* use base and extra for symbol > end */
-    unsigned short count[MAXBITS+1];    /* number of codes of each length */
-    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
-    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
-        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
-        16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 73, 195};
-    static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
-        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577, 0, 0};
-    static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
-        16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
-        23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
-        28, 28, 29, 29, 64, 64};
-
-    /*
-       Process a set of code lengths to create a canonical Huffman code.  The
-       code lengths are lens[0..codes-1].  Each length corresponds to the
-       symbols 0..codes-1.  The Huffman code is generated by first sorting the
-       symbols by length from short to long, and retaining the symbol order
-       for codes with equal lengths.  Then the code starts with all zero bits
-       for the first code of the shortest length, and the codes are integer
-       increments for the same length, and zeros are appended as the length
-       increases.  For the deflate format, these bits are stored backwards
-       from their more natural integer increment ordering, and so when the
-       decoding tables are built in the large loop below, the integer codes
-       are incremented backwards.
-
-       This routine assumes, but does not check, that all of the entries in
-       lens[] are in the range 0..MAXBITS.  The caller must assure this.
-       1..MAXBITS is interpreted as that code length.  zero means that that
-       symbol does not occur in this code.
-
-       The codes are sorted by computing a count of codes for each length,
-       creating from that a table of starting indices for each length in the
-       sorted table, and then entering the symbols in order in the sorted
-       table.  The sorted table is work[], with that space being provided by
-       the caller.
-
-       The length counts are used for other purposes as well, i.e. finding
-       the minimum and maximum length codes, determining if there are any
-       codes at all, checking for a valid set of lengths, and looking ahead
-       at length counts to determine sub-table sizes when building the
-       decoding tables.
-     */
-
-    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
-    for (len = 0; len <= MAXBITS; len++)
-        count[len] = 0;
-    for (sym = 0; sym < codes; sym++)
-        count[lens[sym]]++;
-
-    /* bound code lengths, force root to be within code lengths */
-    root = *bits;
-    for (max = MAXBITS; max >= 1; max--)
-        if (count[max] != 0) break;
-    if (root > max) root = max;
-    if (max == 0) {                     /* no symbols to code at all */
-        here.op = (unsigned char)64;    /* invalid code marker */
-        here.bits = (unsigned char)1;
-        here.val = (unsigned short)0;
-        *(*table)++ = here;             /* make a table to force an error */
-        *(*table)++ = here;
-        *bits = 1;
-        return 0;     /* no symbols, but wait for decoding to report error */
-    }
-    for (min = 1; min < max; min++)
-        if (count[min] != 0) break;
-    if (root < min) root = min;
-
-    /* check for an over-subscribed or incomplete set of lengths */
-    left = 1;
-    for (len = 1; len <= MAXBITS; len++) {
-        left <<= 1;
-        left -= count[len];
-        if (left < 0) return -1;        /* over-subscribed */
-    }
-    if (left > 0 && (type == CODES || max != 1))
-        return -1;                      /* incomplete set */
-
-    /* generate offsets into symbol table for each length for sorting */
-    offs[1] = 0;
-    for (len = 1; len < MAXBITS; len++)
-        offs[len + 1] = offs[len] + count[len];
-
-    /* sort symbols by length, by symbol order within each length */
-    for (sym = 0; sym < codes; sym++)
-        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
-
-    /*
-       Create and fill in decoding tables.  In this loop, the table being
-       filled is at next and has curr index bits.  The code being used is huff
-       with length len.  That code is converted to an index by dropping drop
-       bits off of the bottom.  For codes where len is less than drop + curr,
-       those top drop + curr - len bits are incremented through all values to
-       fill the table with replicated entries.
-
-       root is the number of index bits for the root table.  When len exceeds
-       root, sub-tables are created pointed to by the root entry with an index
-       of the low root bits of huff.  This is saved in low to check for when a
-       new sub-table should be started.  drop is zero when the root table is
-       being filled, and drop is root when sub-tables are being filled.
-
-       When a new sub-table is needed, it is necessary to look ahead in the
-       code lengths to determine what size sub-table is needed.  The length
-       counts are used for this, and so count[] is decremented as codes are
-       entered in the tables.
-
-       used keeps track of how many table entries have been allocated from the
-       provided *table space.  It is checked for LENS and DIST tables against
-       the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
-       the initial root table size constants.  See the comments in inftrees.h
-       for more information.
-
-       sym increments through all symbols, and the loop terminates when
-       all codes of length max, i.e. all codes, have been processed.  This
-       routine permits incomplete codes, so another loop after this one fills
-       in the rest of the decoding tables with invalid code markers.
-     */
-
-    /* set up for code type */
-    switch (type) {
-    case CODES:
-        base = extra = work;    /* dummy value--not used */
-        end = 19;
-        break;
-    case LENS:
-        base = lbase;
-        base -= 257;
-        extra = lext;
-        extra -= 257;
-        end = 256;
-        break;
-    default:            /* DISTS */
-        base = dbase;
-        extra = dext;
-        end = -1;
-    }
-
-    /* initialize state for loop */
-    huff = 0;                   /* starting code */
-    sym = 0;                    /* starting code symbol */
-    len = min;                  /* starting code length */
-    next = *table;              /* current table to fill in */
-    curr = root;                /* current table index bits */
-    drop = 0;                   /* current bits to drop from code for index */
-    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
-    used = 1U << root;          /* use root table entries */
-    mask = used - 1;            /* mask for comparing low */
-
-    /* check available table space */
-    if ((type == LENS && used >= ENOUGH_LENS) ||
-        (type == DISTS && used >= ENOUGH_DISTS))
-        return 1;
-
-    /* process all codes and make table entries */
-    for (;;) {
-        /* create table entry */
-        here.bits = (unsigned char)(len - drop);
-        if ((int)(work[sym]) < end) {
-            here.op = (unsigned char)0;
-            here.val = work[sym];
-        }
-        else if ((int)(work[sym]) > end) {
-            here.op = (unsigned char)(extra[work[sym]]);
-            here.val = base[work[sym]];
-        }
-        else {
-            here.op = (unsigned char)(32 + 64);         /* end of block */
-            here.val = 0;
-        }
-
-        /* replicate for those indices with low len bits equal to huff */
-        incr = 1U << (len - drop);
-        fill = 1U << curr;
-        min = fill;                 /* save offset to next table */
-        do {
-            fill -= incr;
-            next[(huff >> drop) + fill] = here;
-        } while (fill != 0);
-
-        /* backwards increment the len-bit code huff */
-        incr = 1U << (len - 1);
-        while (huff & incr)
-            incr >>= 1;
-        if (incr != 0) {
-            huff &= incr - 1;
-            huff += incr;
-        }
-        else
-            huff = 0;
-
-        /* go to next symbol, update count, len */
-        sym++;
-        if (--(count[len]) == 0) {
-            if (len == max) break;
-            len = lens[work[sym]];
-        }
-
-        /* create new sub-table if needed */
-        if (len > root && (huff & mask) != low) {
-            /* if first time, transition to sub-tables */
-            if (drop == 0)
-                drop = root;
-
-            /* increment past last table */
-            next += min;            /* here min is 1 << curr */
-
-            /* determine length of next table */
-            curr = len - drop;
-            left = (int)(1 << curr);
-            while (curr + drop < max) {
-                left -= count[curr + drop];
-                if (left <= 0) break;
-                curr++;
-                left <<= 1;
-            }
-
-            /* check for enough space */
-            used += 1U << curr;
-            if ((type == LENS && used >= ENOUGH_LENS) ||
-                (type == DISTS && used >= ENOUGH_DISTS))
-                return 1;
-
-            /* point entry in root table to sub-table */
-            low = huff & mask;
-            (*table)[low].op = (unsigned char)curr;
-            (*table)[low].bits = (unsigned char)root;
-            (*table)[low].val = (unsigned short)(next - *table);
-        }
-    }
-
-    /*
-       Fill in rest of table for incomplete codes.  This loop is similar to the
-       loop above in incrementing huff for table indices.  It is assumed that
-       len is equal to curr + drop, so there is no loop needed to increment
-       through high index bits.  When the current sub-table is filled, the loop
-       drops back to the root table to fill in any remaining entries there.
-     */
-    here.op = (unsigned char)64;                /* invalid code marker */
-    here.bits = (unsigned char)(len - drop);
-    here.val = (unsigned short)0;
-    while (huff != 0) {
-        /* when done with sub-table, drop back to root table */
-        if (drop != 0 && (huff & mask) != low) {
-            drop = 0;
-            len = root;
-            next = *table;
-            here.bits = (unsigned char)len;
-        }
-
-        /* put invalid code marker in table */
-        next[huff >> drop] = here;
-
-        /* backwards increment the len-bit code huff */
-        incr = 1U << (len - 1);
-        while (huff & incr)
-            incr >>= 1;
-        if (incr != 0) {
-            huff &= incr - 1;
-            huff += incr;
-        }
-        else
-            huff = 0;
-    }
-
-    /* set return parameters */
-    *table += used;
-    *bits = root;
-    return 0;
-}
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/inftrees.h	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,86 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-2005, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* Structure for decoding tables.  Each entry provides either the
-   information needed to do the operation requested by the code that
-   indexed that table entry, or it provides a pointer to another
-   table that indexes more bits of the code.  op indicates whether
-   the entry is a pointer to another table, a literal, a length or
-   distance, an end-of-block, or an invalid code.  For a table
-   pointer, the low four bits of op is the number of index bits of
-   that table.  For a length or distance, the low four bits of op
-   is the number of extra bits to get after the code.  bits is
-   the number of bits in this code or part of the code to drop off
-   of the bit buffer.  val is the actual byte to output in the case
-   of a literal, the base length or distance, or the offset from
-   the current table to the next table.  Each entry is four bytes. */
-typedef struct {
-    unsigned char op;           /* operation, extra bits, table bits */
-    unsigned char bits;         /* bits in this part of the code */
-    unsigned short val;         /* offset in table or code value */
-} code;
-
-/* op values as set by inflate_table():
-    00000000 - literal
-    0000tttt - table link, tttt != 0 is the number of table index bits
-    0001eeee - length or distance, eeee is the number of extra bits
-    01100000 - end of block
-    01000000 - invalid code
- */
-
-/* Maximum size of the dynamic table.  The maximum number of code structures is
-   1444, which is the sum of 852 for literal/length codes and 592 for distance
-   codes.  These values were found by exhaustive searches using the program
-   examples/enough.c found in the zlib distribtution.  The arguments to that
-   program are the number of symbols, the initial root table size, and the
-   maximum bit length of a code.  "enough 286 9 15" for literal/length codes
-   returns returns 852, and "enough 30 6 15" for distance codes returns 592.
-   The initial root table size (9 or 6) is found in the fifth argument of the
-   inflate_table() calls in inflate.c and infback.c.  If the root table size is
-   changed, then these maximum sizes would be need to be recalculated and
-   updated. */
-#define ENOUGH_LENS 852
-#define ENOUGH_DISTS 592
-#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
-
-/* Type of code to build for inflate_table() */
-typedef enum {
-    CODES,
-    LENS,
-    DISTS
-} codetype;
-
-int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
-                             unsigned codes, code FAR * FAR *table,
-                             unsigned FAR *bits, unsigned short FAR *work));
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/patches/ChangeLog_java	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,10 +0,0 @@
-(1)renamed
-   adler32.c -> zadler32.c
-   zcrc32c -> zcrc32.c
-
-(2)added _LP64 to make uLong a 32-bit int on 64-bit platform
-   zconf.h:
-   uLong -> 32-bit int
-
-(3)updated crc32.c/crc32()
-   unsigned long      -> uLong
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/trees.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1268 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2010 Jean-loup Gailly
- * detect_data_type() function provided freely by Cosmin Truta, 2006
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process uses several Huffman trees. The more
- *      common source values are represented by shorter bit sequences.
- *
- *      Each code tree is stored in a compressed form which is itself
- * a Huffman encoding of the lengths of all the code strings (in
- * ascending order by source values).  The actual code strings are
- * reconstructed from the lengths in the inflate process, as described
- * in the deflate specification.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- *      Storer, James A.
- *          Data Compression:  Methods and Theory, pp. 49-50.
- *          Computer Science Press, 1988.  ISBN 0-7167-8156-5.
- *
- *      Sedgewick, R.
- *          Algorithms, p290.
- *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
- */
-
-/* @(#) $Id$ */
-
-/* #define GEN_TREES_H */
-
-#include "deflate.h"
-
-#ifdef DEBUG
-#  include <ctype.h>
-#endif
-
-/* ===========================================================================
- * Constants
- */
-
-#define MAX_BL_BITS 7
-/* Bit length codes must not exceed MAX_BL_BITS bits */
-
-#define END_BLOCK 256
-/* end of block literal code */
-
-#define REP_3_6      16
-/* repeat previous bit length 3-6 times (2 bits of repeat count) */
-
-#define REPZ_3_10    17
-/* repeat a zero length 3-10 times  (3 bits of repeat count) */
-
-#define REPZ_11_138  18
-/* repeat a zero length 11-138 times  (7 bits of repeat count) */
-
-local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
-   = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
-
-local const int extra_dbits[D_CODES] /* extra bits for each distance code */
-   = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
-
-local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
-   = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
-
-local const uch bl_order[BL_CODES]
-   = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
-/* The lengths of the bit length codes are sent in order of decreasing
- * probability, to avoid transmitting the lengths for unused bit length codes.
- */
-
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
-/* ===========================================================================
- * Local data. These are initialized only once.
- */
-
-#define DIST_CODE_LEN  512 /* see definition of array dist_code below */
-
-#if defined(GEN_TREES_H) || !defined(STDC)
-/* non ANSI compilers may not accept trees.h */
-
-local ct_data static_ltree[L_CODES+2];
-/* The static literal tree. Since the bit lengths are imposed, there is no
- * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
- * below).
- */
-
-local ct_data static_dtree[D_CODES];
-/* The static distance tree. (Actually a trivial tree since all codes use
- * 5 bits.)
- */
-
-uch _dist_code[DIST_CODE_LEN];
-/* Distance codes. The first 256 values correspond to the distances
- * 3 .. 258, the last 256 values correspond to the top 8 bits of
- * the 15 bit distances.
- */
-
-uch _length_code[MAX_MATCH-MIN_MATCH+1];
-/* length code for each normalized match length (0 == MIN_MATCH) */
-
-local int base_length[LENGTH_CODES];
-/* First normalized length for each code (0 = MIN_MATCH) */
-
-local int base_dist[D_CODES];
-/* First normalized distance for each code (0 = distance of 1) */
-
-#else
-#  include "trees.h"
-#endif /* GEN_TREES_H */
-
-struct static_tree_desc_s {
-    const ct_data *static_tree;  /* static tree or NULL */
-    const intf *extra_bits;      /* extra bits for each code or NULL */
-    int     extra_base;          /* base index for extra_bits */
-    int     elems;               /* max number of elements in the tree */
-    int     max_length;          /* max bit length for the codes */
-};
-
-local static_tree_desc  static_l_desc =
-{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
-
-local static_tree_desc  static_d_desc =
-{static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
-
-local static_tree_desc  static_bl_desc =
-{(const ct_data *)0, extra_blbits, 0,   BL_CODES, MAX_BL_BITS};
-
-/* ===========================================================================
- * Local (static) routines in this file.
- */
-
-local void tr_static_init OF((void));
-local void init_block     OF((deflate_state *s));
-local void pqdownheap     OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen     OF((deflate_state *s, tree_desc *desc));
-local void gen_codes      OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree     OF((deflate_state *s, tree_desc *desc));
-local void scan_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local int  build_bl_tree  OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
-                              int blcodes));
-local void compress_block OF((deflate_state *s, ct_data *ltree,
-                              ct_data *dtree));
-local int  detect_data_type OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned value, int length));
-local void bi_windup      OF((deflate_state *s));
-local void bi_flush       OF((deflate_state *s));
-local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
-                              int header));
-
-#ifdef GEN_TREES_H
-local void gen_trees_header OF((void));
-#endif
-
-#ifndef DEBUG
-#  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
-   /* Send a code of the given tree. c and tree must not have side effects */
-
-#else /* DEBUG */
-#  define send_code(s, c, tree) \
-     { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
-       send_bits(s, tree[c].Code, tree[c].Len); }
-#endif
-
-/* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
-    put_byte(s, (uch)((w) & 0xff)); \
-    put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG
-local void send_bits      OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
-    deflate_state *s;
-    int value;  /* value to send */
-    int length; /* number of bits */
-{
-    Tracevv((stderr," l %2d v %4x ", length, value));
-    Assert(length > 0 && length <= 15, "invalid length");
-    s->bits_sent += (ulg)length;
-
-    /* If not enough room in bi_buf, use (valid) bits from bi_buf and
-     * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
-     * unused bits in value.
-     */
-    if (s->bi_valid > (int)Buf_size - length) {
-        s->bi_buf |= (ush)value << s->bi_valid;
-        put_short(s, s->bi_buf);
-        s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
-        s->bi_valid += length - Buf_size;
-    } else {
-        s->bi_buf |= (ush)value << s->bi_valid;
-        s->bi_valid += length;
-    }
-}
-#else /* !DEBUG */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
-  if (s->bi_valid > (int)Buf_size - len) {\
-    int val = value;\
-    s->bi_buf |= (ush)val << s->bi_valid;\
-    put_short(s, s->bi_buf);\
-    s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
-    s->bi_valid += len - Buf_size;\
-  } else {\
-    s->bi_buf |= (ush)(value) << s->bi_valid;\
-    s->bi_valid += len;\
-  }\
-}
-#endif /* DEBUG */
-
-
-/* the arguments must not have side effects */
-
-/* ===========================================================================
- * Initialize the various 'constant' tables.
- */
-local void tr_static_init()
-{
-#if defined(GEN_TREES_H) || !defined(STDC)
-    static int static_init_done = 0;
-    int n;        /* iterates over tree elements */
-    int bits;     /* bit counter */
-    int length;   /* length value */
-    int code;     /* code value */
-    int dist;     /* distance index */
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    if (static_init_done) return;
-
-    /* For some embedded targets, global variables are not initialized: */
-#ifdef NO_INIT_GLOBAL_POINTERS
-    static_l_desc.static_tree = static_ltree;
-    static_l_desc.extra_bits = extra_lbits;
-    static_d_desc.static_tree = static_dtree;
-    static_d_desc.extra_bits = extra_dbits;
-    static_bl_desc.extra_bits = extra_blbits;
-#endif
-
-    /* Initialize the mapping length (0..255) -> length code (0..28) */
-    length = 0;
-    for (code = 0; code < LENGTH_CODES-1; code++) {
-        base_length[code] = length;
-        for (n = 0; n < (1<<extra_lbits[code]); n++) {
-            _length_code[length++] = (uch)code;
-        }
-    }
-    Assert (length == 256, "tr_static_init: length != 256");
-    /* Note that the length 255 (match length 258) can be represented
-     * in two different ways: code 284 + 5 bits or code 285, so we
-     * overwrite length_code[255] to use the best encoding:
-     */
-    _length_code[length-1] = (uch)code;
-
-    /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
-    dist = 0;
-    for (code = 0 ; code < 16; code++) {
-        base_dist[code] = dist;
-        for (n = 0; n < (1<<extra_dbits[code]); n++) {
-            _dist_code[dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "tr_static_init: dist != 256");
-    dist >>= 7; /* from now on, all distances are divided by 128 */
-    for ( ; code < D_CODES; code++) {
-        base_dist[code] = dist << 7;
-        for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
-            _dist_code[256 + dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "tr_static_init: 256+dist != 512");
-
-    /* Construct the codes of the static literal tree */
-    for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
-    n = 0;
-    while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
-    while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
-    while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
-    while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
-    /* Codes 286 and 287 do not exist, but we must include them in the
-     * tree construction to get a canonical Huffman tree (longest code
-     * all ones)
-     */
-    gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
-
-    /* The static distance tree is trivial: */
-    for (n = 0; n < D_CODES; n++) {
-        static_dtree[n].Len = 5;
-        static_dtree[n].Code = bi_reverse((unsigned)n, 5);
-    }
-    static_init_done = 1;
-
-#  ifdef GEN_TREES_H
-    gen_trees_header();
-#  endif
-#endif /* defined(GEN_TREES_H) || !defined(STDC) */
-}
-
-/* ===========================================================================
- * Genererate the file trees.h describing the static trees.
- */
-#ifdef GEN_TREES_H
-#  ifndef DEBUG
-#    include <stdio.h>
-#  endif
-
-#  define SEPARATOR(i, last, width) \
-      ((i) == (last)? "\n};\n\n" :    \
-       ((i) % (width) == (width)-1 ? ",\n" : ", "))
-
-void gen_trees_header()
-{
-    FILE *header = fopen("trees.h", "w");
-    int i;
-
-    Assert (header != NULL, "Can't open trees.h");
-    fprintf(header,
-            "/* header created automatically with -DGEN_TREES_H */\n\n");
-
-    fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
-    for (i = 0; i < L_CODES+2; i++) {
-        fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
-                static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
-    }
-
-    fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
-    for (i = 0; i < D_CODES; i++) {
-        fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
-                static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
-    }
-
-    fprintf(header, "const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {\n");
-    for (i = 0; i < DIST_CODE_LEN; i++) {
-        fprintf(header, "%2u%s", _dist_code[i],
-                SEPARATOR(i, DIST_CODE_LEN-1, 20));
-    }
-
-    fprintf(header,
-        "const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
-    for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
-        fprintf(header, "%2u%s", _length_code[i],
-                SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
-    }
-
-    fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
-    for (i = 0; i < LENGTH_CODES; i++) {
-        fprintf(header, "%1u%s", base_length[i],
-                SEPARATOR(i, LENGTH_CODES-1, 20));
-    }
-
-    fprintf(header, "local const int base_dist[D_CODES] = {\n");
-    for (i = 0; i < D_CODES; i++) {
-        fprintf(header, "%5u%s", base_dist[i],
-                SEPARATOR(i, D_CODES-1, 10));
-    }
-
-    fclose(header);
-}
-#endif /* GEN_TREES_H */
-
-/* ===========================================================================
- * Initialize the tree data structures for a new zlib stream.
- */
-void ZLIB_INTERNAL _tr_init(s)
-    deflate_state *s;
-{
-    tr_static_init();
-
-    s->l_desc.dyn_tree = s->dyn_ltree;
-    s->l_desc.stat_desc = &static_l_desc;
-
-    s->d_desc.dyn_tree = s->dyn_dtree;
-    s->d_desc.stat_desc = &static_d_desc;
-
-    s->bl_desc.dyn_tree = s->bl_tree;
-    s->bl_desc.stat_desc = &static_bl_desc;
-
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-#ifdef DEBUG
-    s->compressed_len = 0L;
-    s->bits_sent = 0L;
-#endif
-
-    /* Initialize the first block of the first file: */
-    init_block(s);
-}
-
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
-    deflate_state *s;
-{
-    int n; /* iterates over tree elements */
-
-    /* Initialize the trees. */
-    for (n = 0; n < L_CODES;  n++) s->dyn_ltree[n].Freq = 0;
-    for (n = 0; n < D_CODES;  n++) s->dyn_dtree[n].Freq = 0;
-    for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
-    s->dyn_ltree[END_BLOCK].Freq = 1;
-    s->opt_len = s->static_len = 0L;
-    s->last_lit = s->matches = 0;
-}
-
-#define SMALLEST 1
-/* Index within the heap array of least frequent node in the Huffman tree */
-
-
-/* ===========================================================================
- * Remove the smallest element from the heap and recreate the heap with
- * one less element. Updates heap and heap_len.
- */
-#define pqremove(s, tree, top) \
-{\
-    top = s->heap[SMALLEST]; \
-    s->heap[SMALLEST] = s->heap[s->heap_len--]; \
-    pqdownheap(s, tree, SMALLEST); \
-}
-
-/* ===========================================================================
- * Compares to subtrees, using the tree depth as tie breaker when
- * the subtrees have equal frequency. This minimizes the worst case length.
- */
-#define smaller(tree, n, m, depth) \
-   (tree[n].Freq < tree[m].Freq || \
-   (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
-
-/* ===========================================================================
- * Restore the heap property by moving down the tree starting at node k,
- * exchanging a node with the smallest of its two sons if necessary, stopping
- * when the heap property is re-established (each father smaller than its
- * two sons).
- */
-local void pqdownheap(s, tree, k)
-    deflate_state *s;
-    ct_data *tree;  /* the tree to restore */
-    int k;               /* node to move down */
-{
-    int v = s->heap[k];
-    int j = k << 1;  /* left son of k */
-    while (j <= s->heap_len) {
-        /* Set j to the smallest of the two sons: */
-        if (j < s->heap_len &&
-            smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
-            j++;
-        }
-        /* Exit if v is smaller than both sons */
-        if (smaller(tree, v, s->heap[j], s->depth)) break;
-
-        /* Exchange v with the smallest son */
-        s->heap[k] = s->heap[j];  k = j;
-
-        /* And continue down the tree, setting j to the left son of k */
-        j <<= 1;
-    }
-    s->heap[k] = v;
-}
-
-/* ===========================================================================
- * Compute the optimal bit lengths for a tree and update the total bit length
- * for the current block.
- * IN assertion: the fields freq and dad are set, heap[heap_max] and
- *    above are the tree nodes sorted by increasing frequency.
- * OUT assertions: the field len is set to the optimal bit length, the
- *     array bl_count contains the frequencies for each bit length.
- *     The length opt_len is updated; static_len is also updated if stree is
- *     not null.
- */
-local void gen_bitlen(s, desc)
-    deflate_state *s;
-    tree_desc *desc;    /* the tree descriptor */
-{
-    ct_data *tree        = desc->dyn_tree;
-    int max_code         = desc->max_code;
-    const ct_data *stree = desc->stat_desc->static_tree;
-    const intf *extra    = desc->stat_desc->extra_bits;
-    int base             = desc->stat_desc->extra_base;
-    int max_length       = desc->stat_desc->max_length;
-    int h;              /* heap index */
-    int n, m;           /* iterate over the tree elements */
-    int bits;           /* bit length */
-    int xbits;          /* extra bits */
-    ush f;              /* frequency */
-    int overflow = 0;   /* number of elements with bit length too large */
-
-    for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
-
-    /* In a first pass, compute the optimal bit lengths (which may
-     * overflow in the case of the bit length tree).
-     */
-    tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
-
-    for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
-        n = s->heap[h];
-        bits = tree[tree[n].Dad].Len + 1;
-        if (bits > max_length) bits = max_length, overflow++;
-        tree[n].Len = (ush)bits;
-        /* We overwrite tree[n].Dad which is no longer needed */
-
-        if (n > max_code) continue; /* not a leaf node */
-
-        s->bl_count[bits]++;
-        xbits = 0;
-        if (n >= base) xbits = extra[n-base];
-        f = tree[n].Freq;
-        s->opt_len += (ulg)f * (bits + xbits);
-        if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
-    }
-    if (overflow == 0) return;
-
-    Trace((stderr,"\nbit length overflow\n"));
-    /* This happens for example on obj2 and pic of the Calgary corpus */
-
-    /* Find the first bit length which could increase: */
-    do {
-        bits = max_length-1;
-        while (s->bl_count[bits] == 0) bits--;
-        s->bl_count[bits]--;      /* move one leaf down the tree */
-        s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
-        s->bl_count[max_length]--;
-        /* The brother of the overflow item also moves one step up,
-         * but this does not affect bl_count[max_length]
-         */
-        overflow -= 2;
-    } while (overflow > 0);
-
-    /* Now recompute all bit lengths, scanning in increasing frequency.
-     * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
-     * lengths instead of fixing only the wrong ones. This idea is taken
-     * from 'ar' written by Haruhiko Okumura.)
-     */
-    for (bits = max_length; bits != 0; bits--) {
-        n = s->bl_count[bits];
-        while (n != 0) {
-            m = s->heap[--h];
-            if (m > max_code) continue;
-            if ((unsigned) tree[m].Len != (unsigned) bits) {
-                Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
-                s->opt_len += ((long)bits - (long)tree[m].Len)
-                              *(long)tree[m].Freq;
-                tree[m].Len = (ush)bits;
-            }
-            n--;
-        }
-    }
-}
-
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- *     zero code length.
- */
-local void gen_codes (tree, max_code, bl_count)
-    ct_data *tree;             /* the tree to decorate */
-    int max_code;              /* largest code with non zero frequency */
-    ushf *bl_count;            /* number of codes at each bit length */
-{
-    ush next_code[MAX_BITS+1]; /* next code value for each bit length */
-    ush code = 0;              /* running code value */
-    int bits;                  /* bit index */
-    int n;                     /* code index */
-
-    /* The distribution counts are first used to generate the code values
-     * without bit reversal.
-     */
-    for (bits = 1; bits <= MAX_BITS; bits++) {
-        next_code[bits] = code = (code + bl_count[bits-1]) << 1;
-    }
-    /* Check that the bit counts in bl_count are consistent. The last code
-     * must be all ones.
-     */
-    Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
-            "inconsistent bit counts");
-    Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
-    for (n = 0;  n <= max_code; n++) {
-        int len = tree[n].Len;
-        if (len == 0) continue;
-        /* Now reverse the bits */
-        tree[n].Code = bi_reverse(next_code[len]++, len);
-
-        Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
-             n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
-    }
-}
-
-/* ===========================================================================
- * Construct one Huffman tree and assigns the code bit strings and lengths.
- * Update the total bit length for the current block.
- * IN assertion: the field freq is set for all tree elements.
- * OUT assertions: the fields len and code are set to the optimal bit length
- *     and corresponding code. The length opt_len is updated; static_len is
- *     also updated if stree is not null. The field max_code is set.
- */
-local void build_tree(s, desc)
-    deflate_state *s;
-    tree_desc *desc; /* the tree descriptor */
-{
-    ct_data *tree         = desc->dyn_tree;
-    const ct_data *stree  = desc->stat_desc->static_tree;
-    int elems             = desc->stat_desc->elems;
-    int n, m;          /* iterate over heap elements */
-    int max_code = -1; /* largest code with non zero frequency */
-    int node;          /* new node being created */
-
-    /* Construct the initial heap, with least frequent element in
-     * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
-     * heap[0] is not used.
-     */
-    s->heap_len = 0, s->heap_max = HEAP_SIZE;
-
-    for (n = 0; n < elems; n++) {
-        if (tree[n].Freq != 0) {
-            s->heap[++(s->heap_len)] = max_code = n;
-            s->depth[n] = 0;
-        } else {
-            tree[n].Len = 0;
-        }
-    }
-
-    /* The pkzip format requires that at least one distance code exists,
-     * and that at least one bit should be sent even if there is only one
-     * possible code. So to avoid special checks later on we force at least
-     * two codes of non zero frequency.
-     */
-    while (s->heap_len < 2) {
-        node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
-        tree[node].Freq = 1;
-        s->depth[node] = 0;
-        s->opt_len--; if (stree) s->static_len -= stree[node].Len;
-        /* node is 0 or 1 so it does not have extra bits */
-    }
-    desc->max_code = max_code;
-
-    /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
-     * establish sub-heaps of increasing lengths:
-     */
-    for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
-
-    /* Construct the Huffman tree by repeatedly combining the least two
-     * frequent nodes.
-     */
-    node = elems;              /* next internal node of the tree */
-    do {
-        pqremove(s, tree, n);  /* n = node of least frequency */
-        m = s->heap[SMALLEST]; /* m = node of next least frequency */
-
-        s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
-        s->heap[--(s->heap_max)] = m;
-
-        /* Create a new node father of n and m */
-        tree[node].Freq = tree[n].Freq + tree[m].Freq;
-        s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ?
-                                s->depth[n] : s->depth[m]) + 1);
-        tree[n].Dad = tree[m].Dad = (ush)node;
-#ifdef DUMP_BL_TREE
-        if (tree == s->bl_tree) {
-            fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
-                    node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
-        }
-#endif
-        /* and insert the new node in the heap */
-        s->heap[SMALLEST] = node++;
-        pqdownheap(s, tree, SMALLEST);
-
-    } while (s->heap_len >= 2);
-
-    s->heap[--(s->heap_max)] = s->heap[SMALLEST];
-
-    /* At this point, the fields freq and dad are set. We can now
-     * generate the bit lengths.
-     */
-    gen_bitlen(s, (tree_desc *)desc);
-
-    /* The field len is now set, we can generate the bit codes */
-    gen_codes ((ct_data *)tree, max_code, s->bl_count);
-}
-
-/* ===========================================================================
- * Scan a literal or distance tree to determine the frequencies of the codes
- * in the bit length tree.
- */
-local void scan_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree;   /* the tree to be scanned */
-    int max_code;    /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    if (nextlen == 0) max_count = 138, min_count = 3;
-    tree[max_code+1].Len = (ush)0xffff; /* guard */
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            s->bl_tree[curlen].Freq += count;
-        } else if (curlen != 0) {
-            if (curlen != prevlen) s->bl_tree[curlen].Freq++;
-            s->bl_tree[REP_3_6].Freq++;
-        } else if (count <= 10) {
-            s->bl_tree[REPZ_3_10].Freq++;
-        } else {
-            s->bl_tree[REPZ_11_138].Freq++;
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Send a literal or distance tree in compressed form, using the codes in
- * bl_tree.
- */
-local void send_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree; /* the tree to be scanned */
-    int max_code;       /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    /* tree[max_code+1].Len = -1; */  /* guard already set */
-    if (nextlen == 0) max_count = 138, min_count = 3;
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
-
-        } else if (curlen != 0) {
-            if (curlen != prevlen) {
-                send_code(s, curlen, s->bl_tree); count--;
-            }
-            Assert(count >= 3 && count <= 6, " 3_6?");
-            send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
-
-        } else if (count <= 10) {
-            send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
-
-        } else {
-            send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Construct the Huffman tree for the bit lengths and return the index in
- * bl_order of the last bit length code to send.
- */
-local int build_bl_tree(s)
-    deflate_state *s;
-{
-    int max_blindex;  /* index of last bit length code of non zero freq */
-
-    /* Determine the bit length frequencies for literal and distance trees */
-    scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
-    scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
-
-    /* Build the bit length tree: */
-    build_tree(s, (tree_desc *)(&(s->bl_desc)));
-    /* opt_len now includes the length of the tree representations, except
-     * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
-     */
-
-    /* Determine the number of bit length codes to send. The pkzip format
-     * requires that at least 4 bit length codes be sent. (appnote.txt says
-     * 3 but the actual value used is 4.)
-     */
-    for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
-        if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
-    }
-    /* Update opt_len to include the bit length tree and counts */
-    s->opt_len += 3*(max_blindex+1) + 5+5+4;
-    Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
-            s->opt_len, s->static_len));
-
-    return max_blindex;
-}
-
-/* ===========================================================================
- * Send the header for a block using dynamic Huffman trees: the counts, the
- * lengths of the bit length codes, the literal tree and the distance tree.
- * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
- */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
-    deflate_state *s;
-    int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
-    int rank;                    /* index in bl_order */
-
-    Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
-    Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
-            "too many codes");
-    Tracev((stderr, "\nbl counts: "));
-    send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
-    send_bits(s, dcodes-1,   5);
-    send_bits(s, blcodes-4,  4); /* not -3 as stated in appnote.txt */
-    for (rank = 0; rank < blcodes; rank++) {
-        Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
-        send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
-    }
-    Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
-    Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
-    Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
-}
-
-/* ===========================================================================
- * Send a stored block
- */
-void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
-    deflate_state *s;
-    charf *buf;       /* input block */
-    ulg stored_len;   /* length of input block */
-    int last;         /* one if this is the last block for a file */
-{
-    send_bits(s, (STORED_BLOCK<<1)+last, 3);    /* send block type */
-#ifdef DEBUG
-    s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
-    s->compressed_len += (stored_len + 4) << 3;
-#endif
-    copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
-}
-
-/* ===========================================================================
- * Send one empty static block to give enough lookahead for inflate.
- * This takes 10 bits, of which 7 may remain in the bit buffer.
- * The current inflate code requires 9 bits of lookahead. If the
- * last two codes for the previous block (real code plus EOB) were coded
- * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
- * the last real code. In this case we send two empty static blocks instead
- * of one. (There are no problems if the previous block is stored or fixed.)
- * To simplify the code, we assume the worst case of last real code encoded
- * on one bit only.
- */
-void ZLIB_INTERNAL _tr_align(s)
-    deflate_state *s;
-{
-    send_bits(s, STATIC_TREES<<1, 3);
-    send_code(s, END_BLOCK, static_ltree);
-#ifdef DEBUG
-    s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
-#endif
-    bi_flush(s);
-    /* Of the 10 bits for the empty block, we have already sent
-     * (10 - bi_valid) bits. The lookahead for the last real code (before
-     * the EOB of the previous block) was thus at least one plus the length
-     * of the EOB plus what we have just sent of the empty static block.
-     */
-    if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
-        send_bits(s, STATIC_TREES<<1, 3);
-        send_code(s, END_BLOCK, static_ltree);
-#ifdef DEBUG
-        s->compressed_len += 10L;
-#endif
-        bi_flush(s);
-    }
-    s->last_eob_len = 7;
-}
-
-/* ===========================================================================
- * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file.
- */
-void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
-    deflate_state *s;
-    charf *buf;       /* input block, or NULL if too old */
-    ulg stored_len;   /* length of input block */
-    int last;         /* one if this is the last block for a file */
-{
-    ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
-    int max_blindex = 0;  /* index of last bit length code of non zero freq */
-
-    /* Build the Huffman trees unless a stored block is forced */
-    if (s->level > 0) {
-
-        /* Check if the file is binary or text */
-        if (s->strm->data_type == Z_UNKNOWN)
-            s->strm->data_type = detect_data_type(s);
-
-        /* Construct the literal and distance trees */
-        build_tree(s, (tree_desc *)(&(s->l_desc)));
-        Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
-                s->static_len));
-
-        build_tree(s, (tree_desc *)(&(s->d_desc)));
-        Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
-                s->static_len));
-        /* At this point, opt_len and static_len are the total bit lengths of
-         * the compressed block data, excluding the tree representations.
-         */
-
-        /* Build the bit length tree for the above two trees, and get the index
-         * in bl_order of the last bit length code to send.
-         */
-        max_blindex = build_bl_tree(s);
-
-        /* Determine the best encoding. Compute the block lengths in bytes. */
-        opt_lenb = (s->opt_len+3+7)>>3;
-        static_lenb = (s->static_len+3+7)>>3;
-
-        Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
-                opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
-                s->last_lit));
-
-        if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
-
-    } else {
-        Assert(buf != (char*)0, "lost buf");
-        opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
-    }
-
-#ifdef FORCE_STORED
-    if (buf != (char*)0) { /* force stored block */
-#else
-    if (stored_len+4 <= opt_lenb && buf != (char*)0) {
-                       /* 4: two words for the lengths */
-#endif
-        /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
-         * Otherwise we can't have processed more than WSIZE input bytes since
-         * the last block flush, because compression would have been
-         * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
-         * transform a block into a stored block.
-         */
-        _tr_stored_block(s, buf, stored_len, last);
-
-#ifdef FORCE_STATIC
-    } else if (static_lenb >= 0) { /* force static trees */
-#else
-    } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) {
-#endif
-        send_bits(s, (STATIC_TREES<<1)+last, 3);
-        compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
-#ifdef DEBUG
-        s->compressed_len += 3 + s->static_len;
-#endif
-    } else {
-        send_bits(s, (DYN_TREES<<1)+last, 3);
-        send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
-                       max_blindex+1);
-        compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
-#ifdef DEBUG
-        s->compressed_len += 3 + s->opt_len;
-#endif
-    }
-    Assert (s->compressed_len == s->bits_sent, "bad compressed size");
-    /* The above check is made mod 2^32, for files larger than 512 MB
-     * and uLong implemented on 32 bits.
-     */
-    init_block(s);
-
-    if (last) {
-        bi_windup(s);
-#ifdef DEBUG
-        s->compressed_len += 7;  /* align on byte boundary */
-#endif
-    }
-    Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
-           s->compressed_len-7*last));
-}
-
-/* ===========================================================================
- * Save the match info and tally the frequency counts. Return true if
- * the current block must be flushed.
- */
-int ZLIB_INTERNAL _tr_tally (s, dist, lc)
-    deflate_state *s;
-    unsigned dist;  /* distance of matched string */
-    unsigned lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
-{
-    s->d_buf[s->last_lit] = (ush)dist;
-    s->l_buf[s->last_lit++] = (uch)lc;
-    if (dist == 0) {
-        /* lc is the unmatched char */
-        s->dyn_ltree[lc].Freq++;
-    } else {
-        s->matches++;
-        /* Here, lc is the match length - MIN_MATCH */
-        dist--;             /* dist = match distance - 1 */
-        Assert((ush)dist < (ush)MAX_DIST(s) &&
-               (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
-               (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
-
-        s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
-        s->dyn_dtree[d_code(dist)].Freq++;
-    }
-
-#ifdef TRUNCATE_BLOCK
-    /* Try to guess if it is profitable to stop the current block here */
-    if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
-        /* Compute an upper bound for the compressed length */
-        ulg out_length = (ulg)s->last_lit*8L;
-        ulg in_length = (ulg)((long)s->strstart - s->block_start);
-        int dcode;
-        for (dcode = 0; dcode < D_CODES; dcode++) {
-            out_length += (ulg)s->dyn_dtree[dcode].Freq *
-                (5L+extra_dbits[dcode]);
-        }
-        out_length >>= 3;
-        Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
-               s->last_lit, in_length, out_length,
-               100L - out_length*100L/in_length));
-        if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
-    }
-#endif
-    return (s->last_lit == s->lit_bufsize-1);
-    /* We avoid equality with lit_bufsize because of wraparound at 64K
-     * on 16 bit machines and because stored blocks are restricted to
-     * 64K-1 bytes.
-     */
-}
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
-    deflate_state *s;
-    ct_data *ltree; /* literal tree */
-    ct_data *dtree; /* distance tree */
-{
-    unsigned dist;      /* distance of matched string */
-    int lc;             /* match length or unmatched char (if dist == 0) */
-    unsigned lx = 0;    /* running index in l_buf */
-    unsigned code;      /* the code to send */
-    int extra;          /* number of extra bits to send */
-
-    if (s->last_lit != 0) do {
-        dist = s->d_buf[lx];
-        lc = s->l_buf[lx++];
-        if (dist == 0) {
-            send_code(s, lc, ltree); /* send a literal byte */
-            Tracecv(isgraph(lc), (stderr," '%c' ", lc));
-        } else {
-            /* Here, lc is the match length - MIN_MATCH */
-            code = _length_code[lc];
-            send_code(s, code+LITERALS+1, ltree); /* send the length code */
-            extra = extra_lbits[code];
-            if (extra != 0) {
-                lc -= base_length[code];
-                send_bits(s, lc, extra);       /* send the extra length bits */
-            }
-            dist--; /* dist is now the match distance - 1 */
-            code = d_code(dist);
-            Assert (code < D_CODES, "bad d_code");
-
-            send_code(s, code, dtree);       /* send the distance code */
-            extra = extra_dbits[code];
-            if (extra != 0) {
-                dist -= base_dist[code];
-                send_bits(s, dist, extra);   /* send the extra distance bits */
-            }
-        } /* literal or match pair ? */
-
-        /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
-        Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx,
-               "pendingBuf overflow");
-
-    } while (lx < s->last_lit);
-
-    send_code(s, END_BLOCK, ltree);
-    s->last_eob_len = ltree[END_BLOCK].Len;
-}
-
-/* ===========================================================================
- * Check if the data type is TEXT or BINARY, using the following algorithm:
- * - TEXT if the two conditions below are satisfied:
- *    a) There are no non-portable control characters belonging to the
- *       "black list" (0..6, 14..25, 28..31).
- *    b) There is at least one printable character belonging to the
- *       "white list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255).
- * - BINARY otherwise.
- * - The following partially-portable control characters form a
- *   "gray list" that is ignored in this detection algorithm:
- *   (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}).
- * IN assertion: the fields Freq of dyn_ltree are set.
- */
-local int detect_data_type(s)
-    deflate_state *s;
-{
-    /* black_mask is the bit mask of black-listed bytes
-     * set bits 0..6, 14..25, and 28..31
-     * 0xf3ffc07f = binary 11110011111111111100000001111111
-     */
-    unsigned long black_mask = 0xf3ffc07fUL;
-    int n;
-
-    /* Check for non-textual ("black-listed") bytes. */
-    for (n = 0; n <= 31; n++, black_mask >>= 1)
-        if ((black_mask & 1) && (s->dyn_ltree[n].Freq != 0))
-            return Z_BINARY;
-
-    /* Check for textual ("white-listed") bytes. */
-    if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0
-            || s->dyn_ltree[13].Freq != 0)
-        return Z_TEXT;
-    for (n = 32; n < LITERALS; n++)
-        if (s->dyn_ltree[n].Freq != 0)
-            return Z_TEXT;
-
-    /* There are no "black-listed" or "white-listed" bytes:
-     * this stream either is empty or has tolerated ("gray-listed") bytes only.
-     */
-    return Z_BINARY;
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(code, len)
-    unsigned code; /* the value to invert */
-    int len;       /* its bit length */
-{
-    register unsigned res = 0;
-    do {
-        res |= code & 1;
-        code >>= 1, res <<= 1;
-    } while (--len > 0);
-    return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
-    deflate_state *s;
-{
-    if (s->bi_valid == 16) {
-        put_short(s, s->bi_buf);
-        s->bi_buf = 0;
-        s->bi_valid = 0;
-    } else if (s->bi_valid >= 8) {
-        put_byte(s, (Byte)s->bi_buf);
-        s->bi_buf >>= 8;
-        s->bi_valid -= 8;
-    }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
-    deflate_state *s;
-{
-    if (s->bi_valid > 8) {
-        put_short(s, s->bi_buf);
-    } else if (s->bi_valid > 0) {
-        put_byte(s, (Byte)s->bi_buf);
-    }
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-#ifdef DEBUG
-    s->bits_sent = (s->bits_sent+7) & ~7;
-#endif
-}
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
-    deflate_state *s;
-    charf    *buf;    /* the input data */
-    unsigned len;     /* its length */
-    int      header;  /* true if block header must be written */
-{
-    bi_windup(s);        /* align on byte boundary */
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-
-    if (header) {
-        put_short(s, (ush)len);
-        put_short(s, (ush)~len);
-#ifdef DEBUG
-        s->bits_sent += 2*16;
-#endif
-    }
-#ifdef DEBUG
-    s->bits_sent += (ulg)len<<3;
-#endif
-    while (len--) {
-        put_byte(s, *buf++);
-    }
-}
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/trees.h	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,152 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* header created automatically with -DGEN_TREES_H */
-
-local const ct_data static_ltree[L_CODES+2] = {
-{{ 12},{  8}}, {{140},{  8}}, {{ 76},{  8}}, {{204},{  8}}, {{ 44},{  8}},
-{{172},{  8}}, {{108},{  8}}, {{236},{  8}}, {{ 28},{  8}}, {{156},{  8}},
-{{ 92},{  8}}, {{220},{  8}}, {{ 60},{  8}}, {{188},{  8}}, {{124},{  8}},
-{{252},{  8}}, {{  2},{  8}}, {{130},{  8}}, {{ 66},{  8}}, {{194},{  8}},
-{{ 34},{  8}}, {{162},{  8}}, {{ 98},{  8}}, {{226},{  8}}, {{ 18},{  8}},
-{{146},{  8}}, {{ 82},{  8}}, {{210},{  8}}, {{ 50},{  8}}, {{178},{  8}},
-{{114},{  8}}, {{242},{  8}}, {{ 10},{  8}}, {{138},{  8}}, {{ 74},{  8}},
-{{202},{  8}}, {{ 42},{  8}}, {{170},{  8}}, {{106},{  8}}, {{234},{  8}},
-{{ 26},{  8}}, {{154},{  8}}, {{ 90},{  8}}, {{218},{  8}}, {{ 58},{  8}},
-{{186},{  8}}, {{122},{  8}}, {{250},{  8}}, {{  6},{  8}}, {{134},{  8}},
-{{ 70},{  8}}, {{198},{  8}}, {{ 38},{  8}}, {{166},{  8}}, {{102},{  8}},
-{{230},{  8}}, {{ 22},{  8}}, {{150},{  8}}, {{ 86},{  8}}, {{214},{  8}},
-{{ 54},{  8}}, {{182},{  8}}, {{118},{  8}}, {{246},{  8}}, {{ 14},{  8}},
-{{142},{  8}}, {{ 78},{  8}}, {{206},{  8}}, {{ 46},{  8}}, {{174},{  8}},
-{{110},{  8}}, {{238},{  8}}, {{ 30},{  8}}, {{158},{  8}}, {{ 94},{  8}},
-{{222},{  8}}, {{ 62},{  8}}, {{190},{  8}}, {{126},{  8}}, {{254},{  8}},
-{{  1},{  8}}, {{129},{  8}}, {{ 65},{  8}}, {{193},{  8}}, {{ 33},{  8}},
-{{161},{  8}}, {{ 97},{  8}}, {{225},{  8}}, {{ 17},{  8}}, {{145},{  8}},
-{{ 81},{  8}}, {{209},{  8}}, {{ 49},{  8}}, {{177},{  8}}, {{113},{  8}},
-{{241},{  8}}, {{  9},{  8}}, {{137},{  8}}, {{ 73},{  8}}, {{201},{  8}},
-{{ 41},{  8}}, {{169},{  8}}, {{105},{  8}}, {{233},{  8}}, {{ 25},{  8}},
-{{153},{  8}}, {{ 89},{  8}}, {{217},{  8}}, {{ 57},{  8}}, {{185},{  8}},
-{{121},{  8}}, {{249},{  8}}, {{  5},{  8}}, {{133},{  8}}, {{ 69},{  8}},
-{{197},{  8}}, {{ 37},{  8}}, {{165},{  8}}, {{101},{  8}}, {{229},{  8}},
-{{ 21},{  8}}, {{149},{  8}}, {{ 85},{  8}}, {{213},{  8}}, {{ 53},{  8}},
-{{181},{  8}}, {{117},{  8}}, {{245},{  8}}, {{ 13},{  8}}, {{141},{  8}},
-{{ 77},{  8}}, {{205},{  8}}, {{ 45},{  8}}, {{173},{  8}}, {{109},{  8}},
-{{237},{  8}}, {{ 29},{  8}}, {{157},{  8}}, {{ 93},{  8}}, {{221},{  8}},
-{{ 61},{  8}}, {{189},{  8}}, {{125},{  8}}, {{253},{  8}}, {{ 19},{  9}},
-{{275},{  9}}, {{147},{  9}}, {{403},{  9}}, {{ 83},{  9}}, {{339},{  9}},
-{{211},{  9}}, {{467},{  9}}, {{ 51},{  9}}, {{307},{  9}}, {{179},{  9}},
-{{435},{  9}}, {{115},{  9}}, {{371},{  9}}, {{243},{  9}}, {{499},{  9}},
-{{ 11},{  9}}, {{267},{  9}}, {{139},{  9}}, {{395},{  9}}, {{ 75},{  9}},
-{{331},{  9}}, {{203},{  9}}, {{459},{  9}}, {{ 43},{  9}}, {{299},{  9}},
-{{171},{  9}}, {{427},{  9}}, {{107},{  9}}, {{363},{  9}}, {{235},{  9}},
-{{491},{  9}}, {{ 27},{  9}}, {{283},{  9}}, {{155},{  9}}, {{411},{  9}},
-{{ 91},{  9}}, {{347},{  9}}, {{219},{  9}}, {{475},{  9}}, {{ 59},{  9}},
-{{315},{  9}}, {{187},{  9}}, {{443},{  9}}, {{123},{  9}}, {{379},{  9}},
-{{251},{  9}}, {{507},{  9}}, {{  7},{  9}}, {{263},{  9}}, {{135},{  9}},
-{{391},{  9}}, {{ 71},{  9}}, {{327},{  9}}, {{199},{  9}}, {{455},{  9}},
-{{ 39},{  9}}, {{295},{  9}}, {{167},{  9}}, {{423},{  9}}, {{103},{  9}},
-{{359},{  9}}, {{231},{  9}}, {{487},{  9}}, {{ 23},{  9}}, {{279},{  9}},
-{{151},{  9}}, {{407},{  9}}, {{ 87},{  9}}, {{343},{  9}}, {{215},{  9}},
-{{471},{  9}}, {{ 55},{  9}}, {{311},{  9}}, {{183},{  9}}, {{439},{  9}},
-{{119},{  9}}, {{375},{  9}}, {{247},{  9}}, {{503},{  9}}, {{ 15},{  9}},
-{{271},{  9}}, {{143},{  9}}, {{399},{  9}}, {{ 79},{  9}}, {{335},{  9}},
-{{207},{  9}}, {{463},{  9}}, {{ 47},{  9}}, {{303},{  9}}, {{175},{  9}},
-{{431},{  9}}, {{111},{  9}}, {{367},{  9}}, {{239},{  9}}, {{495},{  9}},
-{{ 31},{  9}}, {{287},{  9}}, {{159},{  9}}, {{415},{  9}}, {{ 95},{  9}},
-{{351},{  9}}, {{223},{  9}}, {{479},{  9}}, {{ 63},{  9}}, {{319},{  9}},
-{{191},{  9}}, {{447},{  9}}, {{127},{  9}}, {{383},{  9}}, {{255},{  9}},
-{{511},{  9}}, {{  0},{  7}}, {{ 64},{  7}}, {{ 32},{  7}}, {{ 96},{  7}},
-{{ 16},{  7}}, {{ 80},{  7}}, {{ 48},{  7}}, {{112},{  7}}, {{  8},{  7}},
-{{ 72},{  7}}, {{ 40},{  7}}, {{104},{  7}}, {{ 24},{  7}}, {{ 88},{  7}},
-{{ 56},{  7}}, {{120},{  7}}, {{  4},{  7}}, {{ 68},{  7}}, {{ 36},{  7}},
-{{100},{  7}}, {{ 20},{  7}}, {{ 84},{  7}}, {{ 52},{  7}}, {{116},{  7}},
-{{  3},{  8}}, {{131},{  8}}, {{ 67},{  8}}, {{195},{  8}}, {{ 35},{  8}},
-{{163},{  8}}, {{ 99},{  8}}, {{227},{  8}}
-};
-
-local const ct_data static_dtree[D_CODES] = {
-{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
-{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
-{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
-{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
-{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
-{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
-};
-
-const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {
- 0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
- 8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
-10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
-11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
-12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
-13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
-13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  0,  0, 16, 17,
-18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
-23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
-};
-
-const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {
- 0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
-13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
-17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
-19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
-21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
-22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
-23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
-25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
-};
-
-local const int base_length[LENGTH_CODES] = {
-0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
-64, 80, 96, 112, 128, 160, 192, 224, 0
-};
-
-local const int base_dist[D_CODES] = {
-    0,     1,     2,     3,     4,     6,     8,    12,    16,    24,
-   32,    48,    64,    96,   128,   192,   256,   384,   512,   768,
- 1024,  1536,  2048,  3072,  4096,  6144,  8192, 12288, 16384, 24576
-};
-
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/uncompr.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,83 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* uncompr.c -- decompress a memory buffer
- * Copyright (C) 1995-2003, 2010 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#define ZLIB_INTERNAL
-#include "zlib.h"
-
-/* ===========================================================================
-     Decompresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be large enough to hold the
-   entire uncompressed data. (The size of the uncompressed data must have
-   been saved previously by the compressor and transmitted to the decompressor
-   by some mechanism outside the scope of this compression library.)
-   Upon exit, destLen is the actual size of the compressed buffer.
-
-     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer, or Z_DATA_ERROR if the input data was corrupted.
-*/
-int ZEXPORT uncompress (dest, destLen, source, sourceLen)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-{
-    z_stream stream;
-    int err;
-
-    stream.next_in = (Bytef*)source;
-    stream.avail_in = (uInt)sourceLen;
-    /* Check for source > 64K on 16-bit machine: */
-    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
-
-    stream.next_out = dest;
-    stream.avail_out = (uInt)*destLen;
-    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
-
-    stream.zalloc = (alloc_func)0;
-    stream.zfree = (free_func)0;
-
-    err = inflateInit(&stream);
-    if (err != Z_OK) return err;
-
-    err = inflate(&stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        inflateEnd(&stream);
-        if (err == Z_NEED_DICT || (err == Z_BUF_ERROR && stream.avail_in == 0))
-            return Z_DATA_ERROR;
-        return err;
-    }
-    *destLen = (uLong)stream.total_out;
-
-    err = inflateEnd(&stream);
-    return err;
-}
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/zadler32.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,193 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2007 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include "zutil.h"
-
-#define local static
-
-local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
-
-#define BASE 65521UL    /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
-#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
-#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
-#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
-#define DO16(buf)   DO8(buf,0); DO8(buf,8);
-
-/* use NO_DIVIDE if your processor does not do division in hardware */
-#ifdef NO_DIVIDE
-#  define MOD(a) \
-    do { \
-        if (a >= (BASE << 16)) a -= (BASE << 16); \
-        if (a >= (BASE << 15)) a -= (BASE << 15); \
-        if (a >= (BASE << 14)) a -= (BASE << 14); \
-        if (a >= (BASE << 13)) a -= (BASE << 13); \
-        if (a >= (BASE << 12)) a -= (BASE << 12); \
-        if (a >= (BASE << 11)) a -= (BASE << 11); \
-        if (a >= (BASE << 10)) a -= (BASE << 10); \
-        if (a >= (BASE << 9)) a -= (BASE << 9); \
-        if (a >= (BASE << 8)) a -= (BASE << 8); \
-        if (a >= (BASE << 7)) a -= (BASE << 7); \
-        if (a >= (BASE << 6)) a -= (BASE << 6); \
-        if (a >= (BASE << 5)) a -= (BASE << 5); \
-        if (a >= (BASE << 4)) a -= (BASE << 4); \
-        if (a >= (BASE << 3)) a -= (BASE << 3); \
-        if (a >= (BASE << 2)) a -= (BASE << 2); \
-        if (a >= (BASE << 1)) a -= (BASE << 1); \
-        if (a >= BASE) a -= BASE; \
-    } while (0)
-#  define MOD4(a) \
-    do { \
-        if (a >= (BASE << 4)) a -= (BASE << 4); \
-        if (a >= (BASE << 3)) a -= (BASE << 3); \
-        if (a >= (BASE << 2)) a -= (BASE << 2); \
-        if (a >= (BASE << 1)) a -= (BASE << 1); \
-        if (a >= BASE) a -= BASE; \
-    } while (0)
-#else
-#  define MOD(a) a %= BASE
-#  define MOD4(a) a %= BASE
-#endif
-
-/* ========================================================================= */
-uLong ZEXPORT adler32(adler, buf, len)
-    uLong adler;
-    const Bytef *buf;
-    uInt len;
-{
-    unsigned long sum2;
-    unsigned n;
-
-    /* split Adler-32 into component sums */
-    sum2 = (adler >> 16) & 0xffff;
-    adler &= 0xffff;
-
-    /* in case user likes doing a byte at a time, keep it fast */
-    if (len == 1) {
-        adler += buf[0];
-        if (adler >= BASE)
-            adler -= BASE;
-        sum2 += adler;
-        if (sum2 >= BASE)
-            sum2 -= BASE;
-        return adler | (sum2 << 16);
-    }
-
-    /* initial Adler-32 value (deferred check for len == 1 speed) */
-    if (buf == Z_NULL)
-        return 1L;
-
-    /* in case short lengths are provided, keep it somewhat fast */
-    if (len < 16) {
-        while (len--) {
-            adler += *buf++;
-            sum2 += adler;
-        }
-        if (adler >= BASE)
-            adler -= BASE;
-        MOD4(sum2);             /* only added so many BASE's */
-        return adler | (sum2 << 16);
-    }
-
-    /* do length NMAX blocks -- requires just one modulo operation */
-    while (len >= NMAX) {
-        len -= NMAX;
-        n = NMAX / 16;          /* NMAX is divisible by 16 */
-        do {
-            DO16(buf);          /* 16 sums unrolled */
-            buf += 16;
-        } while (--n);
-        MOD(adler);
-        MOD(sum2);
-    }
-
-    /* do remaining bytes (less than NMAX, still just one modulo) */
-    if (len) {                  /* avoid modulos if none remaining */
-        while (len >= 16) {
-            len -= 16;
-            DO16(buf);
-            buf += 16;
-        }
-        while (len--) {
-            adler += *buf++;
-            sum2 += adler;
-        }
-        MOD(adler);
-        MOD(sum2);
-    }
-
-    /* return recombined sums */
-    return adler | (sum2 << 16);
-}
-
-/* ========================================================================= */
-local uLong adler32_combine_(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off64_t len2;
-{
-    unsigned long sum1;
-    unsigned long sum2;
-    unsigned rem;
-
-    /* the derivation of this formula is left as an exercise for the reader */
-    rem = (unsigned)(len2 % BASE);
-    sum1 = adler1 & 0xffff;
-    sum2 = rem * sum1;
-    MOD(sum2);
-    sum1 += (adler2 & 0xffff) + BASE - 1;
-    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
-    if (sum1 >= BASE) sum1 -= BASE;
-    if (sum1 >= BASE) sum1 -= BASE;
-    if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1);
-    if (sum2 >= BASE) sum2 -= BASE;
-    return sum1 | (sum2 << 16);
-}
-
-/* ========================================================================= */
-uLong ZEXPORT adler32_combine(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off_t len2;
-{
-    return adler32_combine_(adler1, adler2, len2);
-}
-
-uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off64_t len2;
-{
-    return adler32_combine_(adler1, adler2, len2);
-}
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/zconf.h	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,459 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#ifndef ZCONF_H
-#define ZCONF_H
-
-/* for _LP64 */
-#include <sys/types.h>
-
-/*
- * If you *really* need a unique prefix for all types and library functions,
- * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
- * Even better than compiling with -DZ_PREFIX would be to use configure to set
- * this permanently in zconf.h using "./configure --zprefix".
- */
-#ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
-
-/* all linked symbols */
-#  define _dist_code            z__dist_code
-#  define _length_code          z__length_code
-#  define _tr_align             z__tr_align
-#  define _tr_flush_block       z__tr_flush_block
-#  define _tr_init              z__tr_init
-#  define _tr_stored_block      z__tr_stored_block
-#  define _tr_tally             z__tr_tally
-#  define adler32               z_adler32
-#  define adler32_combine       z_adler32_combine
-#  define adler32_combine64     z_adler32_combine64
-#  define compress              z_compress
-#  define compress2             z_compress2
-#  define compressBound         z_compressBound
-#  define crc32                 z_crc32
-#  define crc32_combine         z_crc32_combine
-#  define crc32_combine64       z_crc32_combine64
-#  define deflate               z_deflate
-#  define deflateBound          z_deflateBound
-#  define deflateCopy           z_deflateCopy
-#  define deflateEnd            z_deflateEnd
-#  define deflateInit2_         z_deflateInit2_
-#  define deflateInit_          z_deflateInit_
-#  define deflateParams         z_deflateParams
-#  define deflatePrime          z_deflatePrime
-#  define deflateReset          z_deflateReset
-#  define deflateSetDictionary  z_deflateSetDictionary
-#  define deflateSetHeader      z_deflateSetHeader
-#  define deflateTune           z_deflateTune
-#  define deflate_copyright     z_deflate_copyright
-#  define get_crc_table         z_get_crc_table
-#  define gz_error              z_gz_error
-#  define gz_intmax             z_gz_intmax
-#  define gz_strwinerror        z_gz_strwinerror
-#  define gzbuffer              z_gzbuffer
-#  define gzclearerr            z_gzclearerr
-#  define gzclose               z_gzclose
-#  define gzclose_r             z_gzclose_r
-#  define gzclose_w             z_gzclose_w
-#  define gzdirect              z_gzdirect
-#  define gzdopen               z_gzdopen
-#  define gzeof                 z_gzeof
-#  define gzerror               z_gzerror
-#  define gzflush               z_gzflush
-#  define gzgetc                z_gzgetc
-#  define gzgets                z_gzgets
-#  define gzoffset              z_gzoffset
-#  define gzoffset64            z_gzoffset64
-#  define gzopen                z_gzopen
-#  define gzopen64              z_gzopen64
-#  define gzprintf              z_gzprintf
-#  define gzputc                z_gzputc
-#  define gzputs                z_gzputs
-#  define gzread                z_gzread
-#  define gzrewind              z_gzrewind
-#  define gzseek                z_gzseek
-#  define gzseek64              z_gzseek64
-#  define gzsetparams           z_gzsetparams
-#  define gztell                z_gztell
-#  define gztell64              z_gztell64
-#  define gzungetc              z_gzungetc
-#  define gzwrite               z_gzwrite
-#  define inflate               z_inflate
-#  define inflateBack           z_inflateBack
-#  define inflateBackEnd        z_inflateBackEnd
-#  define inflateBackInit_      z_inflateBackInit_
-#  define inflateCopy           z_inflateCopy
-#  define inflateEnd            z_inflateEnd
-#  define inflateGetHeader      z_inflateGetHeader
-#  define inflateInit2_         z_inflateInit2_
-#  define inflateInit_          z_inflateInit_
-#  define inflateMark           z_inflateMark
-#  define inflatePrime          z_inflatePrime
-#  define inflateReset          z_inflateReset
-#  define inflateReset2         z_inflateReset2
-#  define inflateSetDictionary  z_inflateSetDictionary
-#  define inflateSync           z_inflateSync
-#  define inflateSyncPoint      z_inflateSyncPoint
-#  define inflateUndermine      z_inflateUndermine
-#  define inflate_copyright     z_inflate_copyright
-#  define inflate_fast          z_inflate_fast
-#  define inflate_table         z_inflate_table
-#  define uncompress            z_uncompress
-#  define zError                z_zError
-#  define zcalloc               z_zcalloc
-#  define zcfree                z_zcfree
-#  define zlibCompileFlags      z_zlibCompileFlags
-#  define zlibVersion           z_zlibVersion
-
-/* all zlib typedefs in zlib.h and zconf.h */
-#  define Byte                  z_Byte
-#  define Bytef                 z_Bytef
-#  define alloc_func            z_alloc_func
-#  define charf                 z_charf
-#  define free_func             z_free_func
-#  define gzFile                z_gzFile
-#  define gz_header             z_gz_header
-#  define gz_headerp            z_gz_headerp
-#  define in_func               z_in_func
-#  define intf                  z_intf
-#  define out_func              z_out_func
-#  define uInt                  z_uInt
-#  define uIntf                 z_uIntf
-#  define uLong                 z_uLong
-#  define uLongf                z_uLongf
-#  define voidp                 z_voidp
-#  define voidpc                z_voidpc
-#  define voidpf                z_voidpf
-
-/* all zlib structs in zlib.h and zconf.h */
-#  define gz_header_s           z_gz_header_s
-#  define internal_state        z_internal_state
-
-#endif
-
-#if defined(__MSDOS__) && !defined(MSDOS)
-#  define MSDOS
-#endif
-#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
-#  define OS2
-#endif
-#if defined(_WINDOWS) && !defined(WINDOWS)
-#  define WINDOWS
-#endif
-#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
-#  ifndef WIN32
-#    define WIN32
-#  endif
-#endif
-#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
-#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
-#    ifndef SYS16BIT
-#      define SYS16BIT
-#    endif
-#  endif
-#endif
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- */
-#ifdef SYS16BIT
-#  define MAXSEG_64K
-#endif
-#ifdef MSDOS
-#  define UNALIGNED_OK
-#endif
-
-#ifdef __STDC_VERSION__
-#  ifndef STDC
-#    define STDC
-#  endif
-#  if __STDC_VERSION__ >= 199901L
-#    ifndef STDC99
-#      define STDC99
-#    endif
-#  endif
-#endif
-#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
-#  define STDC
-#endif
-#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
-#  define STDC
-#endif
-#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
-#  define STDC
-#endif
-#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
-#  define STDC
-#endif
-
-#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
-#  define STDC
-#endif
-
-#ifndef STDC
-#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-#    define const       /* note: need a more gentle solution here */
-#  endif
-#endif
-
-/* Some Mac compilers merge all .h files incorrectly: */
-#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
-#  define NO_DUMMY_DECL
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2.
- * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
- * created by gzip. (Files created by minigzip can still be extracted by
- * gzip.)
- */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            (1 << (windowBits+2)) +  (1 << (memLevel+9))
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-/* The following definitions for FAR are needed only for MSDOS mixed
- * model programming (small or medium model with some far allocations).
- * This was tested only with MSC; for other MSDOS compilers you may have
- * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
- * just define FAR to be empty.
- */
-#ifdef SYS16BIT
-#  if defined(M_I86SM) || defined(M_I86MM)
-     /* MSC small or medium model */
-#    define SMALL_MEDIUM
-#    ifdef _MSC_VER
-#      define FAR _far
-#    else
-#      define FAR far
-#    endif
-#  endif
-#  if (defined(__SMALL__) || defined(__MEDIUM__))
-     /* Turbo C small or medium model */
-#    define SMALL_MEDIUM
-#    ifdef __BORLANDC__
-#      define FAR _far
-#    else
-#      define FAR far
-#    endif
-#  endif
-#endif
-
-#if defined(WINDOWS) || defined(WIN32)
-   /* If building or using zlib as a DLL, define ZLIB_DLL.
-    * This is not mandatory, but it offers a little performance increase.
-    */
-#  ifdef ZLIB_DLL
-#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
-#      ifdef ZLIB_INTERNAL
-#        define ZEXTERN extern __declspec(dllexport)
-#      else
-#        define ZEXTERN extern __declspec(dllimport)
-#      endif
-#    endif
-#  endif  /* ZLIB_DLL */
-   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
-    * define ZLIB_WINAPI.
-    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
-    */
-#  ifdef ZLIB_WINAPI
-#    ifdef FAR
-#      undef FAR
-#    endif
-#    include <windows.h>
-     /* No need for _export, use ZLIB.DEF instead. */
-     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
-#    define ZEXPORT WINAPI
-#    ifdef WIN32
-#      define ZEXPORTVA WINAPIV
-#    else
-#      define ZEXPORTVA FAR CDECL
-#    endif
-#  endif
-#endif
-
-#if defined (__BEOS__)
-#  ifdef ZLIB_DLL
-#    ifdef ZLIB_INTERNAL
-#      define ZEXPORT   __declspec(dllexport)
-#      define ZEXPORTVA __declspec(dllexport)
-#    else
-#      define ZEXPORT   __declspec(dllimport)
-#      define ZEXPORTVA __declspec(dllimport)
-#    endif
-#  endif
-#endif
-
-#ifndef ZEXTERN
-#  define ZEXTERN extern
-#endif
-#ifndef ZEXPORT
-#  define ZEXPORT
-#endif
-#ifndef ZEXPORTVA
-#  define ZEXPORTVA
-#endif
-
-#ifndef FAR
-#  define FAR
-#endif
-
-#if !defined(__MACTYPES__)
-typedef unsigned char  Byte;  /* 8 bits */
-#endif
-typedef unsigned int   uInt;  /* 16 bits or more */
-#ifdef _LP64
-typedef unsigned int  uLong;  /* 32 bits or more */
-#else
-typedef unsigned long  uLong; /* 32 bits or more */
-#endif
-
-#ifdef SMALL_MEDIUM
-   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
-#  define Bytef Byte FAR
-#else
-   typedef Byte  FAR Bytef;
-#endif
-typedef char  FAR charf;
-typedef int   FAR intf;
-typedef uInt  FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void const *voidpc;
-   typedef void FAR   *voidpf;
-   typedef void       *voidp;
-#else
-   typedef Byte const *voidpc;
-   typedef Byte FAR   *voidpf;
-   typedef Byte       *voidp;
-#endif
-
-#ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
-#  define Z_HAVE_UNISTD_H
-#endif
-
-#ifdef STDC
-#  include <sys/types.h>    /* for off_t */
-#endif
-
-/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
- * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
- * though the former does not conform to the LFS document), but considering
- * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
- * equivalently requesting no 64-bit operations
- */
-#if -_LARGEFILE64_SOURCE - -1 == 1
-#  undef _LARGEFILE64_SOURCE
-#endif
-
-#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
-#  include <unistd.h>       /* for SEEK_* and off_t */
-#  ifdef VMS
-#    include <unixio.h>     /* for off_t */
-#  endif
-#  ifndef z_off_t
-#    define z_off_t off_t
-#  endif
-#endif
-
-#ifndef SEEK_SET
-#  define SEEK_SET        0       /* Seek from beginning of file.  */
-#  define SEEK_CUR        1       /* Seek from current position.  */
-#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
-#endif
-
-#ifndef z_off_t
-#  define z_off_t long
-#endif
-
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
-#  define z_off64_t off64_t
-#else
-#  define z_off64_t z_off_t
-#endif
-
-#if defined(__OS400__)
-#  define NO_vsnprintf
-#endif
-
-#if defined(__MVS__)
-#  define NO_vsnprintf
-#endif
-
-/* MVS linker does not support external names larger than 8 bytes */
-#if defined(__MVS__)
-  #pragma map(deflateInit_,"DEIN")
-  #pragma map(deflateInit2_,"DEIN2")
-  #pragma map(deflateEnd,"DEEND")
-  #pragma map(deflateBound,"DEBND")
-  #pragma map(inflateInit_,"ININ")
-  #pragma map(inflateInit2_,"ININ2")
-  #pragma map(inflateEnd,"INEND")
-  #pragma map(inflateSync,"INSY")
-  #pragma map(inflateSetDictionary,"INSEDI")
-  #pragma map(compressBound,"CMBND")
-  #pragma map(inflate_table,"INTABL")
-  #pragma map(inflate_fast,"INFA")
-  #pragma map(inflate_copyright,"INCOPY")
-#endif
-
-#endif /* ZCONF_H */
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/zcrc32.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,466 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-2006, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- *
- * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
- * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
- * tables for updating the shift register in one step with three exclusive-ors
- * instead of four steps with four exclusive-ors.  This results in about a
- * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
- */
-
-/* @(#) $Id$ */
-
-/*
-  Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
-  protection on the static variables used to control the first-use generation
-  of the crc tables.  Therefore, if you #define DYNAMIC_CRC_TABLE, you should
-  first call get_crc_table() to initialize the tables before allowing more than
-  one thread to use crc32().
- */
-
-#ifdef MAKECRCH
-#  include <stdio.h>
-#  ifndef DYNAMIC_CRC_TABLE
-#    define DYNAMIC_CRC_TABLE
-#  endif /* !DYNAMIC_CRC_TABLE */
-#endif /* MAKECRCH */
-
-#include "zutil.h"      /* for STDC and FAR definitions */
-
-#define local static
-
-/* Find a four-byte integer type for crc32_little() and crc32_big(). */
-#ifndef NOBYFOUR
-#  ifdef STDC           /* need ANSI C limits.h to determine sizes */
-#    include <limits.h>
-#    define BYFOUR
-#    if (UINT_MAX == 0xffffffffUL)
-       typedef unsigned int u4;
-#    else
-#      if (ULONG_MAX == 0xffffffffUL)
-         typedef unsigned long u4;
-#      else
-#        if (USHRT_MAX == 0xffffffffUL)
-           typedef unsigned short u4;
-#        else
-#          undef BYFOUR     /* can't find a four-byte integer type! */
-#        endif
-#      endif
-#    endif
-#  endif /* STDC */
-#endif /* !NOBYFOUR */
-
-/* Definitions for doing the crc four data bytes at a time. */
-#ifdef BYFOUR
-#  define REV(w) ((((w)>>24)&0xff)+(((w)>>8)&0xff00)+ \
-                (((w)&0xff00)<<8)+(((w)&0xff)<<24))
-   local unsigned long crc32_little OF((unsigned long,
-                        const unsigned char FAR *, unsigned));
-   local unsigned long crc32_big OF((unsigned long,
-                        const unsigned char FAR *, unsigned));
-#  define TBLS 8
-#else
-#  define TBLS 1
-#endif /* BYFOUR */
-
-/* Local functions for crc concatenation */
-local unsigned long gf2_matrix_times OF((unsigned long *mat,
-                                         unsigned long vec));
-local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
-local uLong crc32_combine_(uLong crc1, uLong crc2, z_off64_t len2);
-
-
-#ifdef DYNAMIC_CRC_TABLE
-
-local volatile int crc_table_empty = 1;
-local unsigned long FAR crc_table[TBLS][256];
-local void make_crc_table OF((void));
-#ifdef MAKECRCH
-   local void write_table OF((FILE *, const unsigned long FAR *));
-#endif /* MAKECRCH */
-/*
-  Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
-  x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
-
-  Polynomials over GF(2) are represented in binary, one bit per coefficient,
-  with the lowest powers in the most significant bit.  Then adding polynomials
-  is just exclusive-or, and multiplying a polynomial by x is a right shift by
-  one.  If we call the above polynomial p, and represent a byte as the
-  polynomial q, also with the lowest power in the most significant bit (so the
-  byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
-  where a mod b means the remainder after dividing a by b.
-
-  This calculation is done using the shift-register method of multiplying and
-  taking the remainder.  The register is initialized to zero, and for each
-  incoming bit, x^32 is added mod p to the register if the bit is a one (where
-  x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
-  x (which is shifting right by one and adding x^32 mod p if the bit shifted
-  out is a one).  We start with the highest power (least significant bit) of
-  q and repeat for all eight bits of q.
-
-  The first table is simply the CRC of all possible eight bit values.  This is
-  all the information needed to generate CRCs on data a byte at a time for all
-  combinations of CRC register values and incoming bytes.  The remaining tables
-  allow for word-at-a-time CRC calculation for both big-endian and little-
-  endian machines, where a word is four bytes.
-*/
-local void make_crc_table()
-{
-    unsigned long c;
-    int n, k;
-    unsigned long poly;                 /* polynomial exclusive-or pattern */
-    /* terms of polynomial defining this crc (except x^32): */
-    static volatile int first = 1;      /* flag to limit concurrent making */
-    static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
-
-    /* See if another task is already doing this (not thread-safe, but better
-       than nothing -- significantly reduces duration of vulnerability in
-       case the advice about DYNAMIC_CRC_TABLE is ignored) */
-    if (first) {
-        first = 0;
-
-        /* make exclusive-or pattern from polynomial (0xedb88320UL) */
-        poly = 0UL;
-        for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
-            poly |= 1UL << (31 - p[n]);
-
-        /* generate a crc for every 8-bit value */
-        for (n = 0; n < 256; n++) {
-            c = (unsigned long)n;
-            for (k = 0; k < 8; k++)
-                c = c & 1 ? poly ^ (c >> 1) : c >> 1;
-            crc_table[0][n] = c;
-        }
-
-#ifdef BYFOUR
-        /* generate crc for each value followed by one, two, and three zeros,
-           and then the byte reversal of those as well as the first table */
-        for (n = 0; n < 256; n++) {
-            c = crc_table[0][n];
-            crc_table[4][n] = REV(c);
-            for (k = 1; k < 4; k++) {
-                c = crc_table[0][c & 0xff] ^ (c >> 8);
-                crc_table[k][n] = c;
-                crc_table[k + 4][n] = REV(c);
-            }
-        }
-#endif /* BYFOUR */
-
-        crc_table_empty = 0;
-    }
-    else {      /* not first */
-        /* wait for the other guy to finish (not efficient, but rare) */
-        while (crc_table_empty)
-            ;
-    }
-
-#ifdef MAKECRCH
-    /* write out CRC tables to crc32.h */
-    {
-        FILE *out;
-
-        out = fopen("crc32.h", "w");
-        if (out == NULL) return;
-        fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
-        fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
-        fprintf(out, "local const unsigned long FAR ");
-        fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
-        write_table(out, crc_table[0]);
-#  ifdef BYFOUR
-        fprintf(out, "#ifdef BYFOUR\n");
-        for (k = 1; k < 8; k++) {
-            fprintf(out, "  },\n  {\n");
-            write_table(out, crc_table[k]);
-        }
-        fprintf(out, "#endif\n");
-#  endif /* BYFOUR */
-        fprintf(out, "  }\n};\n");
-        fclose(out);
-    }
-#endif /* MAKECRCH */
-}
-
-#ifdef MAKECRCH
-local void write_table(out, table)
-    FILE *out;
-    const unsigned long FAR *table;
-{
-    int n;
-
-    for (n = 0; n < 256; n++)
-        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ", table[n],
-                n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
-}
-#endif /* MAKECRCH */
-
-#else /* !DYNAMIC_CRC_TABLE */
-/* ========================================================================
- * Tables of CRC-32s of all single-byte values, made by make_crc_table().
- */
-#include "crc32.h"
-#endif /* DYNAMIC_CRC_TABLE */
-
-/* =========================================================================
- * This function can be used by asm versions of crc32()
- */
-const unsigned long FAR * ZEXPORT get_crc_table()
-{
-#ifdef DYNAMIC_CRC_TABLE
-    if (crc_table_empty)
-        make_crc_table();
-#endif /* DYNAMIC_CRC_TABLE */
-    return (const unsigned long FAR *)crc_table;
-}
-
-/* ========================================================================= */
-#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
-#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
-
-/* ========================================================================= */
-uLong ZEXPORT crc32(crc, buf, len)
-    uLong crc;
-    const unsigned char FAR *buf;
-    uInt len;
-{
-    if (buf == Z_NULL) return 0UL;
-
-#ifdef DYNAMIC_CRC_TABLE
-    if (crc_table_empty)
-        make_crc_table();
-#endif /* DYNAMIC_CRC_TABLE */
-
-#ifdef BYFOUR
-    if (sizeof(void *) == sizeof(ptrdiff_t)) {
-        u4 endian;
-
-        endian = 1;
-        if (*((unsigned char *)(&endian)))
-            return (uLong)crc32_little(crc, buf, len);
-        else
-            return (uLong)crc32_big(crc, buf, len);
-    }
-#endif /* BYFOUR */
-    crc = crc ^ 0xffffffffUL;
-    while (len >= 8) {
-        DO8;
-        len -= 8;
-    }
-    if (len) do {
-        DO1;
-    } while (--len);
-    return crc ^ 0xffffffffUL;
-}
-
-#ifdef BYFOUR
-
-/* ========================================================================= */
-#define DOLIT4 c ^= *buf4++; \
-        c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
-            crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
-#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
-
-/* ========================================================================= */
-local unsigned long crc32_little(crc, buf, len)
-    unsigned long crc;
-    const unsigned char FAR *buf;
-    unsigned len;
-{
-    register u4 c;
-    register const u4 FAR *buf4;
-
-    c = (u4)crc;
-    c = ~c;
-    while (len && ((ptrdiff_t)buf & 3)) {
-        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
-        len--;
-    }
-
-    buf4 = (const u4 FAR *)(const void FAR *)buf;
-    while (len >= 32) {
-        DOLIT32;
-        len -= 32;
-    }
-    while (len >= 4) {
-        DOLIT4;
-        len -= 4;
-    }
-    buf = (const unsigned char FAR *)buf4;
-
-    if (len) do {
-        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
-    } while (--len);
-    c = ~c;
-    return (unsigned long)c;
-}
-
-/* ========================================================================= */
-#define DOBIG4 c ^= *++buf4; \
-        c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
-            crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
-#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
-
-/* ========================================================================= */
-local unsigned long crc32_big(crc, buf, len)
-    unsigned long crc;
-    const unsigned char FAR *buf;
-    unsigned len;
-{
-    register u4 c;
-    register const u4 FAR *buf4;
-
-    c = REV((u4)crc);
-    c = ~c;
-    while (len && ((ptrdiff_t)buf & 3)) {
-        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
-        len--;
-    }
-
-    buf4 = (const u4 FAR *)(const void FAR *)buf;
-    buf4--;
-    while (len >= 32) {
-        DOBIG32;
-        len -= 32;
-    }
-    while (len >= 4) {
-        DOBIG4;
-        len -= 4;
-    }
-    buf4++;
-    buf = (const unsigned char FAR *)buf4;
-
-    if (len) do {
-        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
-    } while (--len);
-    c = ~c;
-    return (unsigned long)(REV(c));
-}
-
-#endif /* BYFOUR */
-
-#define GF2_DIM 32      /* dimension of GF(2) vectors (length of CRC) */
-
-/* ========================================================================= */
-local unsigned long gf2_matrix_times(mat, vec)
-    unsigned long *mat;
-    unsigned long vec;
-{
-    unsigned long sum;
-
-    sum = 0;
-    while (vec) {
-        if (vec & 1)
-            sum ^= *mat;
-        vec >>= 1;
-        mat++;
-    }
-    return sum;
-}
-
-/* ========================================================================= */
-local void gf2_matrix_square(square, mat)
-    unsigned long *square;
-    unsigned long *mat;
-{
-    int n;
-
-    for (n = 0; n < GF2_DIM; n++)
-        square[n] = gf2_matrix_times(mat, mat[n]);
-}
-
-/* ========================================================================= */
-local uLong crc32_combine_(crc1, crc2, len2)
-    uLong crc1;
-    uLong crc2;
-    z_off64_t len2;
-{
-    int n;
-    unsigned long row;
-    unsigned long even[GF2_DIM];    /* even-power-of-two zeros operator */
-    unsigned long odd[GF2_DIM];     /* odd-power-of-two zeros operator */
-
-    /* degenerate case (also disallow negative lengths) */
-    if (len2 <= 0)
-        return crc1;
-
-    /* put operator for one zero bit in odd */
-    odd[0] = 0xedb88320UL;          /* CRC-32 polynomial */
-    row = 1;
-    for (n = 1; n < GF2_DIM; n++) {
-        odd[n] = row;
-        row <<= 1;
-    }
-
-    /* put operator for two zero bits in even */
-    gf2_matrix_square(even, odd);
-
-    /* put operator for four zero bits in odd */
-    gf2_matrix_square(odd, even);
-
-    /* apply len2 zeros to crc1 (first square will put the operator for one
-       zero byte, eight zero bits, in even) */
-    do {
-        /* apply zeros operator for this bit of len2 */
-        gf2_matrix_square(even, odd);
-        if (len2 & 1)
-            crc1 = gf2_matrix_times(even, crc1);
-        len2 >>= 1;
-
-        /* if no more bits set, then done */
-        if (len2 == 0)
-            break;
-
-        /* another iteration of the loop with odd and even swapped */
-        gf2_matrix_square(odd, even);
-        if (len2 & 1)
-            crc1 = gf2_matrix_times(odd, crc1);
-        len2 >>= 1;
-
-        /* if no more bits set, then done */
-    } while (len2 != 0);
-
-    /* return combined crc */
-    crc1 ^= crc2;
-    return crc1;
-}
-
-/* ========================================================================= */
-uLong ZEXPORT crc32_combine(crc1, crc2, len2)
-    uLong crc1;
-    uLong crc2;
-    z_off_t len2;
-{
-    return crc32_combine_(crc1, crc2, len2);
-}
-
-uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
-    uLong crc1;
-    uLong crc2;
-    z_off64_t len2;
-{
-    return crc32_combine_(crc1, crc2, len2);
-}
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/zlib.h	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1637 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.5, April 19th, 2010
-
-  Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  jloup@gzip.org          madler@alumni.caltech.edu
-
-
-  The data format used by the zlib library is described by RFCs (Request for
-  Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
-  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
-*/
-
-#ifndef ZLIB_H
-#define ZLIB_H
-
-#include "zconf.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define ZLIB_VERSION "1.2.5"
-#define ZLIB_VERNUM 0x1250
-#define ZLIB_VER_MAJOR 1
-#define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 5
-#define ZLIB_VER_SUBREVISION 0
-
-/*
-    The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed data.
-  This version of the library supports only one compression method (deflation)
-  but other algorithms will be added later and will have the same stream
-  interface.
-
-    Compression can be done in a single step if the buffers are large enough,
-  or can be done by repeated calls of the compression function.  In the latter
-  case, the application must provide more input and/or consume the output
-  (providing more output space) before each call.
-
-    The compressed data format used by default by the in-memory functions is
-  the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
-  around a deflate stream, which is itself documented in RFC 1951.
-
-    The library also supports reading and writing files in gzip (.gz) format
-  with an interface similar to that of stdio using the functions that start
-  with "gz".  The gzip format is different from the zlib format.  gzip is a
-  gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
-
-    This library can optionally read and write gzip streams in memory as well.
-
-    The zlib format was designed to be compact and fast for use in memory
-  and on communications channels.  The gzip format was designed for single-
-  file compression on file systems, has a larger header than zlib to maintain
-  directory information, and uses a different, slower check method than zlib.
-
-    The library does not install any signal handler.  The decoder checks
-  the consistency of the compressed data, so the library should never crash
-  even in case of corrupted input.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
-
-struct internal_state;
-
-typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
-
-    Bytef    *next_out; /* next output byte should be put there */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
-
-    char     *msg;      /* last error message, NULL if no error */
-    struct internal_state FAR *state; /* not visible by applications */
-
-    alloc_func zalloc;  /* used to allocate the internal state */
-    free_func  zfree;   /* used to free the internal state */
-    voidpf     opaque;  /* private data object passed to zalloc and zfree */
-
-    int     data_type;  /* best guess about the data type: binary or text */
-    uLong   adler;      /* adler32 value of the uncompressed data */
-    uLong   reserved;   /* reserved for future use */
-} z_stream;
-
-typedef z_stream FAR *z_streamp;
-
-/*
-     gzip header information passed to and from zlib routines.  See RFC 1952
-  for more details on the meanings of these fields.
-*/
-typedef struct gz_header_s {
-    int     text;       /* true if compressed data believed to be text */
-    uLong   time;       /* modification time */
-    int     xflags;     /* extra flags (not used when writing a gzip file) */
-    int     os;         /* operating system */
-    Bytef   *extra;     /* pointer to extra field or Z_NULL if none */
-    uInt    extra_len;  /* extra field length (valid if extra != Z_NULL) */
-    uInt    extra_max;  /* space at extra (only when reading header) */
-    Bytef   *name;      /* pointer to zero-terminated file name or Z_NULL */
-    uInt    name_max;   /* space at name (only when reading header) */
-    Bytef   *comment;   /* pointer to zero-terminated comment or Z_NULL */
-    uInt    comm_max;   /* space at comment (only when reading header) */
-    int     hcrc;       /* true if there was or will be a header crc */
-    int     done;       /* true when done reading gzip header (not used
-                           when writing a gzip file) */
-} gz_header;
-
-typedef gz_header FAR *gz_headerp;
-
-/*
-     The application must update next_in and avail_in when avail_in has dropped
-   to zero.  It must update next_out and avail_out when avail_out has dropped
-   to zero.  The application must initialize zalloc, zfree and opaque before
-   calling the init function.  All other fields are set by the compression
-   library and must not be updated by the application.
-
-     The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree.  This can be useful for custom
-   memory management.  The compression library attaches no meaning to the
-   opaque value.
-
-     zalloc must return Z_NULL if there is not enough memory for the object.
-   If zlib is used in a multi-threaded application, zalloc and zfree must be
-   thread safe.
-
-     On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this if
-   the symbol MAXSEG_64K is defined (see zconf.h).  WARNING: On MSDOS, pointers
-   returned by zalloc for objects of exactly 65536 bytes *must* have their
-   offset normalized to zero.  The default allocation function provided by this
-   library ensures this (see zutil.c).  To reduce memory requirements and avoid
-   any allocation of 64K objects, at the expense of compression ratio, compile
-   the library with -DMAX_WBITS=14 (see zconf.h).
-
-     The fields total_in and total_out can be used for statistics or progress
-   reports.  After compression, total_in holds the total size of the
-   uncompressed data and may be saved for use in the decompressor (particularly
-   if the decompressor wants to decompress everything in a single step).
-*/
-
-                        /* constants */
-
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
-#define Z_SYNC_FLUSH    2
-#define Z_FULL_FLUSH    3
-#define Z_FINISH        4
-#define Z_BLOCK         5
-#define Z_TREES         6
-/* Allowed flush values; see deflate() and inflate() below for details */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_NEED_DICT     2
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative values
- * are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION         0
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_RLE                 3
-#define Z_FIXED               4
-#define Z_DEFAULT_STRATEGY    0
-/* compression strategy; see deflateInit2() below for details */
-
-#define Z_BINARY   0
-#define Z_TEXT     1
-#define Z_ASCII    Z_TEXT   /* for compatibility with 1.2.2 and earlier */
-#define Z_UNKNOWN  2
-/* Possible values of the data_type field (though see inflate()) */
-
-#define Z_DEFLATED   8
-/* The deflate compression method (the only one supported in this version) */
-
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
-
-#define zlib_version zlibVersion()
-/* for compatibility with versions < 1.0.2 */
-
-
-                        /* basic functions */
-
-ZEXTERN const char * ZEXPORT zlibVersion OF((void));
-/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is not
-   compatible with the zlib.h header file used by the application.  This check
-   is automatically made by deflateInit and inflateInit.
- */
-
-/*
-ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
-
-     Initializes the internal stream state for compression.  The fields
-   zalloc, zfree and opaque must be initialized before by the caller.  If
-   zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
-   allocation functions.
-
-     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
-   1 gives best speed, 9 gives best compression, 0 gives no compression at all
-   (the input data is simply copied a block at a time).  Z_DEFAULT_COMPRESSION
-   requests a default compromise between speed and compression (currently
-   equivalent to level 6).
-
-     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_STREAM_ERROR if level is not a valid compression level, or
-   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
-   with the version assumed by the caller (ZLIB_VERSION).  msg is set to null
-   if there is no error message.  deflateInit does not perform any compression:
-   this will be done by deflate().
-*/
-
-
-ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
-/*
-    deflate compresses as much data as possible, and stops when the input
-  buffer becomes empty or the output buffer becomes full.  It may introduce
-  some output latency (reading input without producing any output) except when
-  forced to flush.
-
-    The detailed semantics are as follows.  deflate performs one or both of the
-  following actions:
-
-  - Compress more input starting at next_in and update next_in and avail_in
-    accordingly.  If not all input can be processed (because there is not
-    enough room in the output buffer), next_in and avail_in are updated and
-    processing will resume at this point for the next call of deflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  This action is forced if the parameter flush is non zero.
-    Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).  Some
-    output may be provided even if flush is not set.
-
-    Before the call of deflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming more
-  output, and updating avail_in or avail_out accordingly; avail_out should
-  never be zero before the call.  The application can consume the compressed
-  output when it wants, for example when the output buffer is full (avail_out
-  == 0), or after each call of deflate().  If deflate returns Z_OK and with
-  zero avail_out, it must be called again after making room in the output
-  buffer because there might be more output pending.
-
-    Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
-  decide how much data to accumulate before producing output, in order to
-  maximize compression.
-
-    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
-  flushed to the output buffer and the output is aligned on a byte boundary, so
-  that the decompressor can get all input data available so far.  (In
-  particular avail_in is zero after the call if enough output space has been
-  provided before the call.) Flushing may degrade compression for some
-  compression algorithms and so it should be used only when necessary.  This
-  completes the current deflate block and follows it with an empty stored block
-  that is three bits plus filler bits to the next byte, followed by four bytes
-  (00 00 ff ff).
-
-    If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
-  output buffer, but the output is not aligned to a byte boundary.  All of the
-  input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
-  This completes the current deflate block and follows it with an empty fixed
-  codes block that is 10 bits long.  This assures that enough bytes are output
-  in order for the decompressor to finish the block before the empty fixed code
-  block.
-
-    If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
-  for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
-  seven bits of the current block are held to be written as the next byte after
-  the next deflate block is completed.  In this case, the decompressor may not
-  be provided enough bits at this point in order to complete decompression of
-  the data provided so far to the compressor.  It may need to wait for the next
-  block to be emitted.  This is for advanced applications that need to control
-  the emission of deflate blocks.
-
-    If flush is set to Z_FULL_FLUSH, all output is flushed as with
-  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
-  restart from this point if previous compressed data has been damaged or if
-  random access is desired.  Using Z_FULL_FLUSH too often can seriously degrade
-  compression.
-
-    If deflate returns with avail_out == 0, this function must be called again
-  with the same value of the flush parameter and more output space (updated
-  avail_out), until the flush is complete (deflate returns with non-zero
-  avail_out).  In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
-  avail_out is greater than six to avoid repeated flush markers due to
-  avail_out == 0 on return.
-
-    If the parameter flush is set to Z_FINISH, pending input is processed,
-  pending output is flushed and deflate returns with Z_STREAM_END if there was
-  enough output space; if deflate returns with Z_OK, this function must be
-  called again with Z_FINISH and more output space (updated avail_out) but no
-  more input data, until it returns with Z_STREAM_END or an error.  After
-  deflate has returned Z_STREAM_END, the only possible operations on the stream
-  are deflateReset or deflateEnd.
-
-    Z_FINISH can be used immediately after deflateInit if all the compression
-  is to be done in a single step.  In this case, avail_out must be at least the
-  value returned by deflateBound (see below).  If deflate does not return
-  Z_STREAM_END, then it must be called again as described above.
-
-    deflate() sets strm->adler to the adler32 checksum of all input read
-  so far (that is, total_in bytes).
-
-    deflate() may update strm->data_type if it can make a good guess about
-  the input data type (Z_BINARY or Z_TEXT).  In doubt, the data is considered
-  binary.  This field is only for information purposes and does not affect the
-  compression algorithm in any manner.
-
-    deflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if all input has been
-  consumed and all output has been produced (only when flush is set to
-  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
-  (for example avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not
-  fatal, and deflate() can be called again with more input and more output
-  space to continue compressing.
-*/
-
-
-ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any pending
-   output.
-
-     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
-   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
-   prematurely (some input or output was discarded).  In the error case, msg
-   may be set but then points to a static string (which must not be
-   deallocated).
-*/
-
-
-/*
-ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
-
-     Initializes the internal stream state for decompression.  The fields
-   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
-   the caller.  If next_in is not Z_NULL and avail_in is large enough (the
-   exact value depends on the compression method), inflateInit determines the
-   compression method from the zlib header and allocates all data structures
-   accordingly; otherwise the allocation will be deferred to the first call of
-   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to
-   use default allocation functions.
-
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
-   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
-   invalid, such as a null pointer to the structure.  msg is set to null if
-   there is no error message.  inflateInit does not perform any decompression
-   apart from possibly reading the zlib header if present: actual decompression
-   will be done by inflate().  (So next_in and avail_in may be modified, but
-   next_out and avail_out are unused and unchanged.) The current implementation
-   of inflateInit() does not process any header information -- that is deferred
-   until inflate() is called.
-*/
-
-
-ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
-/*
-    inflate decompresses as much data as possible, and stops when the input
-  buffer becomes empty or the output buffer becomes full.  It may introduce
-  some output latency (reading input without producing any output) except when
-  forced to flush.
-
-  The detailed semantics are as follows.  inflate performs one or both of the
-  following actions:
-
-  - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly.  If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing will
-    resume at this point for the next call of inflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() provides as much output as possible, until there is
-    no more input data or no more space in the output buffer (see below about
-    the flush parameter).
-
-    Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming more
-  output, and updating the next_* and avail_* values accordingly.  The
-  application can consume the uncompressed output when it wants, for example
-  when the output buffer is full (avail_out == 0), or after each call of
-  inflate().  If inflate returns Z_OK and with zero avail_out, it must be
-  called again after making room in the output buffer because there might be
-  more output pending.
-
-    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
-  Z_BLOCK, or Z_TREES.  Z_SYNC_FLUSH requests that inflate() flush as much
-  output as possible to the output buffer.  Z_BLOCK requests that inflate()
-  stop if and when it gets to the next deflate block boundary.  When decoding
-  the zlib or gzip format, this will cause inflate() to return immediately
-  after the header and before the first block.  When doing a raw inflate,
-  inflate() will go ahead and process the first block, and will return when it
-  gets to the end of that block, or when it runs out of data.
-
-    The Z_BLOCK option assists in appending to or combining deflate streams.
-  Also to assist in this, on return inflate() will set strm->data_type to the
-  number of unused bits in the last byte taken from strm->next_in, plus 64 if
-  inflate() is currently decoding the last block in the deflate stream, plus
-  128 if inflate() returned immediately after decoding an end-of-block code or
-  decoding the complete header up to just before the first byte of the deflate
-  stream.  The end-of-block will not be indicated until all of the uncompressed
-  data from that block has been written to strm->next_out.  The number of
-  unused bits may in general be greater than seven, except when bit 7 of
-  data_type is set, in which case the number of unused bits will be less than
-  eight.  data_type is set as noted here every time inflate() returns for all
-  flush options, and so can be used to determine the amount of currently
-  consumed input in bits.
-
-    The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
-  end of each deflate block header is reached, before any actual data in that
-  block is decoded.  This allows the caller to determine the length of the
-  deflate block header for later use in random access within a deflate block.
-  256 is added to the value of strm->data_type when inflate() returns
-  immediately after reaching the end of the deflate block header.
-
-    inflate() should normally be called until it returns Z_STREAM_END or an
-  error.  However if all decompression is to be performed in a single step (a
-  single call of inflate), the parameter flush should be set to Z_FINISH.  In
-  this case all pending input is processed and all pending output is flushed;
-  avail_out must be large enough to hold all the uncompressed data.  (The size
-  of the uncompressed data may have been saved by the compressor for this
-  purpose.) The next operation on this stream must be inflateEnd to deallocate
-  the decompression state.  The use of Z_FINISH is never required, but can be
-  used to inform inflate that a faster approach may be used for the single
-  inflate() call.
-
-     In this implementation, inflate() always flushes as much output as
-  possible to the output buffer, and always uses the faster approach on the
-  first call.  So the only effect of the flush parameter in this implementation
-  is on the return value of inflate(), as noted below, or when it returns early
-  because Z_BLOCK or Z_TREES is used.
-
-     If a preset dictionary is needed after this call (see inflateSetDictionary
-  below), inflate sets strm->adler to the adler32 checksum of the dictionary
-  chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
-  strm->adler to the adler32 checksum of all output produced so far (that is,
-  total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
-  below.  At the end of the stream, inflate() checks that its computed adler32
-  checksum is equal to that saved by the compressor and returns Z_STREAM_END
-  only if the checksum is correct.
-
-    inflate() can decompress and check either zlib-wrapped or gzip-wrapped
-  deflate data.  The header type is detected automatically, if requested when
-  initializing with inflateInit2().  Any information contained in the gzip
-  header is not retained, so applications that need that information should
-  instead use raw inflate, see inflateInit2() below, or inflateBack() and
-  perform their own processing of the gzip header and trailer.
-
-    inflate() returns Z_OK if some progress has been made (more input processed
-  or more output produced), Z_STREAM_END if the end of the compressed data has
-  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
-  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
-  corrupted (input stream not conforming to the zlib format or incorrect check
-  value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
-  next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
-  Z_BUF_ERROR if no progress is possible or if there was not enough room in the
-  output buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
-  inflate() can be called again with more input and more output space to
-  continue decompressing.  If Z_DATA_ERROR is returned, the application may
-  then call inflateSync() to look for a good compression block if a partial
-  recovery of the data is desired.
-*/
-
-
-ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any pending
-   output.
-
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent.  In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
-*/
-
-
-                        /* Advanced functions */
-
-/*
-    The following functions are needed only in some special applications.
-*/
-
-/*
-ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
-                                     int  level,
-                                     int  method,
-                                     int  windowBits,
-                                     int  memLevel,
-                                     int  strategy));
-
-     This is another version of deflateInit with more compression options.  The
-   fields next_in, zalloc, zfree and opaque must be initialized before by the
-   caller.
-
-     The method parameter is the compression method.  It must be Z_DEFLATED in
-   this version of the library.
-
-     The windowBits parameter is the base two logarithm of the window size
-   (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library.  Larger values of this parameter result in better
-   compression at the expense of memory usage.  The default value is 15 if
-   deflateInit is used instead.
-
-     windowBits can also be -8..-15 for raw deflate.  In this case, -windowBits
-   determines the window size.  deflate() will then generate raw deflate data
-   with no zlib header or trailer, and will not compute an adler32 check value.
-
-     windowBits can also be greater than 15 for optional gzip encoding.  Add
-   16 to windowBits to write a simple gzip header and trailer around the
-   compressed data instead of a zlib wrapper.  The gzip header will have no
-   file name, no extra data, no comment, no modification time (set to zero), no
-   header crc, and the operating system will be set to 255 (unknown).  If a
-   gzip stream is being written, strm->adler is a crc32 instead of an adler32.
-
-     The memLevel parameter specifies how much memory should be allocated
-   for the internal compression state.  memLevel=1 uses minimum memory but is
-   slow and reduces compression ratio; memLevel=9 uses maximum memory for
-   optimal speed.  The default value is 8.  See zconf.h for total memory usage
-   as a function of windowBits and memLevel.
-
-     The strategy parameter is used to tune the compression algorithm.  Use the
-   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
-   filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
-   string match), or Z_RLE to limit match distances to one (run-length
-   encoding).  Filtered data consists mostly of small values with a somewhat
-   random distribution.  In this case, the compression algorithm is tuned to
-   compress them better.  The effect of Z_FILTERED is to force more Huffman
-   coding and less string matching; it is somewhat intermediate between
-   Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY.  Z_RLE is designed to be almost as
-   fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data.  The
-   strategy parameter only affects the compression ratio but not the
-   correctness of the compressed output even if it is not set appropriately.
-   Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
-   decoder for special applications.
-
-     deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
-   method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
-   incompatible with the version assumed by the caller (ZLIB_VERSION).  msg is
-   set to null if there is no error message.  deflateInit2 does not perform any
-   compression: this will be done by deflate().
-*/
-
-ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
-                                             const Bytef *dictionary,
-                                             uInt  dictLength));
-/*
-     Initializes the compression dictionary from the given byte sequence
-   without producing any compressed output.  This function must be called
-   immediately after deflateInit, deflateInit2 or deflateReset, before any call
-   of deflate.  The compressor and decompressor must use exactly the same
-   dictionary (see inflateSetDictionary).
-
-     The dictionary should consist of strings (byte sequences) that are likely
-   to be encountered later in the data to be compressed, with the most commonly
-   used strings preferably put towards the end of the dictionary.  Using a
-   dictionary is most useful when the data to be compressed is short and can be
-   predicted with good accuracy; the data can then be compressed better than
-   with the default empty dictionary.
-
-     Depending on the size of the compression data structures selected by
-   deflateInit or deflateInit2, a part of the dictionary may in effect be
-   discarded, for example if the dictionary is larger than the window size
-   provided in deflateInit or deflateInit2.  Thus the strings most likely to be
-   useful should be put at the end of the dictionary, not at the front.  In
-   addition, the current implementation of deflate will use at most the window
-   size minus 262 bytes of the provided dictionary.
-
-     Upon return of this function, strm->adler is set to the adler32 value
-   of the dictionary; the decompressor may later use this value to determine
-   which dictionary has been used by the compressor.  (The adler32 value
-   applies to the whole dictionary even if only a subset of the dictionary is
-   actually used by the compressor.) If a raw deflate was requested, then the
-   adler32 value is not computed and strm->adler is not set.
-
-     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
-   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
-   inconsistent (for example if deflate has already been called for this stream
-   or if the compression method is bsort).  deflateSetDictionary does not
-   perform any compression: this will be done by deflate().
-*/
-
-ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
-                                    z_streamp source));
-/*
-     Sets the destination stream as a complete copy of the source stream.
-
-     This function can be useful when several compression strategies will be
-   tried, for example when there are several ways of pre-processing the input
-   data with a filter.  The streams that will be discarded should then be freed
-   by calling deflateEnd.  Note that deflateCopy duplicates the internal
-   compression state which can be quite large, so this strategy is slow and can
-   consume lots of memory.
-
-     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
-   destination.
-*/
-
-ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
-/*
-     This function is equivalent to deflateEnd followed by deflateInit,
-   but does not free and reallocate all the internal compression state.  The
-   stream will keep the same compression level and any other attributes that
-   may have been set by deflateInit2.
-
-     deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being Z_NULL).
-*/
-
-ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
-                                      int level,
-                                      int strategy));
-/*
-     Dynamically update the compression level and compression strategy.  The
-   interpretation of level and strategy is as in deflateInit2.  This can be
-   used to switch between compression and straight copy of the input data, or
-   to switch to a different kind of input data requiring a different strategy.
-   If the compression level is changed, the input available so far is
-   compressed with the old level (and may be flushed); the new level will take
-   effect only at the next call of deflate().
-
-     Before the call of deflateParams, the stream state must be set as for
-   a call of deflate(), since the currently available input may have to be
-   compressed and flushed.  In particular, strm->avail_out must be non-zero.
-
-     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
-   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
-   strm->avail_out was zero.
-*/
-
-ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
-                                    int good_length,
-                                    int max_lazy,
-                                    int nice_length,
-                                    int max_chain));
-/*
-     Fine tune deflate's internal compression parameters.  This should only be
-   used by someone who understands the algorithm used by zlib's deflate for
-   searching for the best matching string, and even then only by the most
-   fanatic optimizer trying to squeeze out the last compressed bit for their
-   specific input data.  Read the deflate.c source code for the meaning of the
-   max_lazy, good_length, nice_length, and max_chain parameters.
-
-     deflateTune() can be called after deflateInit() or deflateInit2(), and
-   returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
- */
-
-ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
-                                       uLong sourceLen));
-/*
-     deflateBound() returns an upper bound on the compressed size after
-   deflation of sourceLen bytes.  It must be called after deflateInit() or
-   deflateInit2(), and after deflateSetHeader(), if used.  This would be used
-   to allocate an output buffer for deflation in a single pass, and so would be
-   called before deflate().
-*/
-
-ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
-                                     int bits,
-                                     int value));
-/*
-     deflatePrime() inserts bits in the deflate output stream.  The intent
-   is that this function is used to start off the deflate output with the bits
-   leftover from a previous deflate stream when appending to it.  As such, this
-   function can only be used for raw deflate, and must be used before the first
-   deflate() call after a deflateInit2() or deflateReset().  bits must be less
-   than or equal to 16, and that many of the least significant bits of value
-   will be inserted in the output.
-
-     deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent.
-*/
-
-ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
-                                         gz_headerp head));
-/*
-     deflateSetHeader() provides gzip header information for when a gzip
-   stream is requested by deflateInit2().  deflateSetHeader() may be called
-   after deflateInit2() or deflateReset() and before the first call of
-   deflate().  The text, time, os, extra field, name, and comment information
-   in the provided gz_header structure are written to the gzip header (xflag is
-   ignored -- the extra flags are set according to the compression level).  The
-   caller must assure that, if not Z_NULL, name and comment are terminated with
-   a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
-   available there.  If hcrc is true, a gzip header crc is included.  Note that
-   the current versions of the command-line version of gzip (up through version
-   1.3.x) do not support header crc's, and will report that it is a "multi-part
-   gzip file" and give up.
-
-     If deflateSetHeader is not used, the default gzip header has text false,
-   the time set to zero, and os set to 255, with no extra, name, or comment
-   fields.  The gzip header is returned to the default state by deflateReset().
-
-     deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent.
-*/
-
-/*
-ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
-                                     int  windowBits));
-
-     This is another version of inflateInit with an extra parameter.  The
-   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
-   before by the caller.
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library.  The default value is 15 if inflateInit is used
-   instead.  windowBits must be greater than or equal to the windowBits value
-   provided to deflateInit2() while compressing, or it must be equal to 15 if
-   deflateInit2() was not used.  If a compressed stream with a larger window
-   size is given as input, inflate() will return with the error code
-   Z_DATA_ERROR instead of trying to allocate a larger window.
-
-     windowBits can also be zero to request that inflate use the window size in
-   the zlib header of the compressed stream.
-
-     windowBits can also be -8..-15 for raw inflate.  In this case, -windowBits
-   determines the window size.  inflate() will then process raw deflate data,
-   not looking for a zlib or gzip header, not generating a check value, and not
-   looking for any check values for comparison at the end of the stream.  This
-   is for use with other formats that use the deflate compressed data format
-   such as zip.  Those formats provide their own check values.  If a custom
-   format is developed using the raw deflate format for compressed data, it is
-   recommended that a check value such as an adler32 or a crc32 be applied to
-   the uncompressed data as is done in the zlib, gzip, and zip formats.  For
-   most applications, the zlib format should be used as is.  Note that comments
-   above on the use in deflateInit2() applies to the magnitude of windowBits.
-
-     windowBits can also be greater than 15 for optional gzip decoding.  Add
-   32 to windowBits to enable zlib and gzip decoding with automatic header
-   detection, or add 16 to decode only the gzip format (the zlib format will
-   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is a
-   crc32 instead of an adler32.
-
-     inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
-   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
-   invalid, such as a null pointer to the structure.  msg is set to null if
-   there is no error message.  inflateInit2 does not perform any decompression
-   apart from possibly reading the zlib header if present: actual decompression
-   will be done by inflate().  (So next_in and avail_in may be modified, but
-   next_out and avail_out are unused and unchanged.) The current implementation
-   of inflateInit2() does not process any header information -- that is
-   deferred until inflate() is called.
-*/
-
-ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
-                                             const Bytef *dictionary,
-                                             uInt  dictLength));
-/*
-     Initializes the decompression dictionary from the given uncompressed byte
-   sequence.  This function must be called immediately after a call of inflate,
-   if that call returned Z_NEED_DICT.  The dictionary chosen by the compressor
-   can be determined from the adler32 value returned by that call of inflate.
-   The compressor and decompressor must use exactly the same dictionary (see
-   deflateSetDictionary).  For raw inflate, this function can be called
-   immediately after inflateInit2() or inflateReset() and before any call of
-   inflate() to set the dictionary.  The application must insure that the
-   dictionary that was used for compression is provided.
-
-     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
-   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
-   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
-   expected one (incorrect adler32 value).  inflateSetDictionary does not
-   perform any decompression: this will be done by subsequent calls of
-   inflate().
-*/
-
-ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
-/*
-     Skips invalid compressed data until a full flush point (see above the
-   description of deflate with Z_FULL_FLUSH) can be found, or until all
-   available input is skipped.  No output is provided.
-
-     inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
-   if no more input was provided, Z_DATA_ERROR if no flush point has been
-   found, or Z_STREAM_ERROR if the stream structure was inconsistent.  In the
-   success case, the application may save the current current value of total_in
-   which indicates where valid compressed data was found.  In the error case,
-   the application may repeatedly call inflateSync, providing more input each
-   time, until success or end of the input data.
-*/
-
-ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
-                                    z_streamp source));
-/*
-     Sets the destination stream as a complete copy of the source stream.
-
-     This function can be useful when randomly accessing a large stream.  The
-   first pass through the stream can periodically record the inflate state,
-   allowing restarting inflate at those points when randomly accessing the
-   stream.
-
-     inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
-   destination.
-*/
-
-ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
-/*
-     This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.  The
-   stream will keep attributes that may have been set by inflateInit2.
-
-     inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being Z_NULL).
-*/
-
-ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
-                                      int windowBits));
-/*
-     This function is the same as inflateReset, but it also permits changing
-   the wrap and window size requests.  The windowBits parameter is interpreted
-   the same as it is for inflateInit2.
-
-     inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being Z_NULL), or if
-   the windowBits parameter is invalid.
-*/
-
-ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
-                                     int bits,
-                                     int value));
-/*
-     This function inserts bits in the inflate input stream.  The intent is
-   that this function is used to start inflating at a bit position in the
-   middle of a byte.  The provided bits will be used before any bytes are used
-   from next_in.  This function should only be used with raw inflate, and
-   should be used before the first inflate() call after inflateInit2() or
-   inflateReset().  bits must be less than or equal to 16, and that many of the
-   least significant bits of value will be inserted in the input.
-
-     If bits is negative, then the input stream bit buffer is emptied.  Then
-   inflatePrime() can be called again to put bits in the buffer.  This is used
-   to clear out bits leftover after feeding inflate a block description prior
-   to feeding inflate codes.
-
-     inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent.
-*/
-
-ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
-/*
-     This function returns two values, one in the lower 16 bits of the return
-   value, and the other in the remaining upper bits, obtained by shifting the
-   return value down 16 bits.  If the upper value is -1 and the lower value is
-   zero, then inflate() is currently decoding information outside of a block.
-   If the upper value is -1 and the lower value is non-zero, then inflate is in
-   the middle of a stored block, with the lower value equaling the number of
-   bytes from the input remaining to copy.  If the upper value is not -1, then
-   it is the number of bits back from the current bit position in the input of
-   the code (literal or length/distance pair) currently being processed.  In
-   that case the lower value is the number of bytes already emitted for that
-   code.
-
-     A code is being processed if inflate is waiting for more input to complete
-   decoding of the code, or if it has completed decoding but is waiting for
-   more output space to write the literal or match data.
-
-     inflateMark() is used to mark locations in the input data for random
-   access, which may be at bit positions, and to note those cases where the
-   output of a code may span boundaries of random access blocks.  The current
-   location in the input stream can be determined from avail_in and data_type
-   as noted in the description for the Z_BLOCK flush parameter for inflate.
-
-     inflateMark returns the value noted above or -1 << 16 if the provided
-   source stream state was inconsistent.
-*/
-
-ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
-                                         gz_headerp head));
-/*
-     inflateGetHeader() requests that gzip header information be stored in the
-   provided gz_header structure.  inflateGetHeader() may be called after
-   inflateInit2() or inflateReset(), and before the first call of inflate().
-   As inflate() processes the gzip stream, head->done is zero until the header
-   is completed, at which time head->done is set to one.  If a zlib stream is
-   being decoded, then head->done is set to -1 to indicate that there will be
-   no gzip header information forthcoming.  Note that Z_BLOCK or Z_TREES can be
-   used to force inflate() to return immediately after header processing is
-   complete and before any actual data is decompressed.
-
-     The text, time, xflags, and os fields are filled in with the gzip header
-   contents.  hcrc is set to true if there is a header CRC.  (The header CRC
-   was valid if done is set to one.) If extra is not Z_NULL, then extra_max
-   contains the maximum number of bytes to write to extra.  Once done is true,
-   extra_len contains the actual extra field length, and extra contains the
-   extra field, or that field truncated if extra_max is less than extra_len.
-   If name is not Z_NULL, then up to name_max characters are written there,
-   terminated with a zero unless the length is greater than name_max.  If
-   comment is not Z_NULL, then up to comm_max characters are written there,
-   terminated with a zero unless the length is greater than comm_max.  When any
-   of extra, name, or comment are not Z_NULL and the respective field is not
-   present in the header, then that field is set to Z_NULL to signal its
-   absence.  This allows the use of deflateSetHeader() with the returned
-   structure to duplicate the header.  However if those fields are set to
-   allocated memory, then the application will need to save those pointers
-   elsewhere so that they can be eventually freed.
-
-     If inflateGetHeader is not used, then the header information is simply
-   discarded.  The header is always checked for validity, including the header
-   CRC if present.  inflateReset() will reset the process to discard the header
-   information.  The application would need to call inflateGetHeader() again to
-   retrieve the header from the next gzip stream.
-
-     inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent.
-*/
-
-/*
-ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
-                                        unsigned char FAR *window));
-
-     Initialize the internal stream state for decompression using inflateBack()
-   calls.  The fields zalloc, zfree and opaque in strm must be initialized
-   before the call.  If zalloc and zfree are Z_NULL, then the default library-
-   derived memory allocation routines are used.  windowBits is the base two
-   logarithm of the window size, in the range 8..15.  window is a caller
-   supplied buffer of that size.  Except for special applications where it is
-   assured that deflate was used with small window sizes, windowBits must be 15
-   and a 32K byte window must be supplied to be able to decompress general
-   deflate streams.
-
-     See inflateBack() for the usage of these routines.
-
-     inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
-   the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
-   allocated, or Z_VERSION_ERROR if the version of the library does not match
-   the version of the header file.
-*/
-
-typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
-typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
-
-ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
-                                    in_func in, void FAR *in_desc,
-                                    out_func out, void FAR *out_desc));
-/*
-     inflateBack() does a raw inflate with a single call using a call-back
-   interface for input and output.  This is more efficient than inflate() for
-   file i/o applications in that it avoids copying between the output and the
-   sliding window by simply making the window itself the output buffer.  This
-   function trusts the application to not change the output buffer passed by
-   the output function, at least until inflateBack() returns.
-
-     inflateBackInit() must be called first to allocate the internal state
-   and to initialize the state with the user-provided window buffer.
-   inflateBack() may then be used multiple times to inflate a complete, raw
-   deflate stream with each call.  inflateBackEnd() is then called to free the
-   allocated state.
-
-     A raw deflate stream is one with no zlib or gzip header or trailer.
-   This routine would normally be used in a utility that reads zip or gzip
-   files and writes out uncompressed files.  The utility would decode the
-   header and process the trailer on its own, hence this routine expects only
-   the raw deflate stream to decompress.  This is different from the normal
-   behavior of inflate(), which expects either a zlib or gzip header and
-   trailer around the deflate stream.
-
-     inflateBack() uses two subroutines supplied by the caller that are then
-   called by inflateBack() for input and output.  inflateBack() calls those
-   routines until it reads a complete deflate stream and writes out all of the
-   uncompressed data, or until it encounters an error.  The function's
-   parameters and return types are defined above in the in_func and out_func
-   typedefs.  inflateBack() will call in(in_desc, &buf) which should return the
-   number of bytes of provided input, and a pointer to that input in buf.  If
-   there is no input available, in() must return zero--buf is ignored in that
-   case--and inflateBack() will return a buffer error.  inflateBack() will call
-   out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].  out()
-   should return zero on success, or non-zero on failure.  If out() returns
-   non-zero, inflateBack() will return with an error.  Neither in() nor out()
-   are permitted to change the contents of the window provided to
-   inflateBackInit(), which is also the buffer that out() uses to write from.
-   The length written by out() will be at most the window size.  Any non-zero
-   amount of input may be provided by in().
-
-     For convenience, inflateBack() can be provided input on the first call by
-   setting strm->next_in and strm->avail_in.  If that input is exhausted, then
-   in() will be called.  Therefore strm->next_in must be initialized before
-   calling inflateBack().  If strm->next_in is Z_NULL, then in() will be called
-   immediately for input.  If strm->next_in is not Z_NULL, then strm->avail_in
-   must also be initialized, and then if strm->avail_in is not zero, input will
-   initially be taken from strm->next_in[0 ..  strm->avail_in - 1].
-
-     The in_desc and out_desc parameters of inflateBack() is passed as the
-   first parameter of in() and out() respectively when they are called.  These
-   descriptors can be optionally used to pass any information that the caller-
-   supplied in() and out() functions need to do their job.
-
-     On return, inflateBack() will set strm->next_in and strm->avail_in to
-   pass back any unused input that was provided by the last in() call.  The
-   return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
-   if in() or out() returned an error, Z_DATA_ERROR if there was a format error
-   in the deflate stream (in which case strm->msg is set to indicate the nature
-   of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
-   In the case of Z_BUF_ERROR, an input or output error can be distinguished
-   using strm->next_in which will be Z_NULL only if in() returned an error.  If
-   strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
-   non-zero.  (in() will always be called before out(), so strm->next_in is
-   assured to be defined if out() returns non-zero.) Note that inflateBack()
-   cannot return Z_OK.
-*/
-
-ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
-/*
-     All memory allocated by inflateBackInit() is freed.
-
-     inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
-   state was inconsistent.
-*/
-
-ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
-/* Return flags indicating compile-time options.
-
-    Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
-     1.0: size of uInt
-     3.2: size of uLong
-     5.4: size of voidpf (pointer)
-     7.6: size of z_off_t
-
-    Compiler, assembler, and debug options:
-     8: DEBUG
-     9: ASMV or ASMINF -- use ASM code
-     10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
-     11: 0 (reserved)
-
-    One-time table building (smaller code, but not thread-safe if true):
-     12: BUILDFIXED -- build static block decoding tables when needed
-     13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
-     14,15: 0 (reserved)
-
-    Library content (indicates missing functionality):
-     16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
-                          deflate code when not needed)
-     17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
-                    and decode gzip streams (to avoid linking crc code)
-     18-19: 0 (reserved)
-
-    Operation variations (changes in library functionality):
-     20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
-     21: FASTEST -- deflate algorithm with only one, lowest compression level
-     22,23: 0 (reserved)
-
-    The sprintf variant used by gzprintf (zero is best):
-     24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
-     25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
-     26: 0 = returns value, 1 = void -- 1 means inferred string length returned
-
-    Remainder:
-     27-31: 0 (reserved)
- */
-
-
-                        /* utility functions */
-
-/*
-     The following utility functions are implemented on top of the basic
-   stream-oriented functions.  To simplify the interface, some default options
-   are assumed (compression level and memory usage, standard memory allocation
-   functions).  The source code of these utility functions can be modified if
-   you need special options.
-*/
-
-ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
-                                 const Bytef *source, uLong sourceLen));
-/*
-     Compresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer.  Upon entry, destLen is the total size
-   of the destination buffer, which must be at least the value returned by
-   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
-   compressed buffer.
-
-     compress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer.
-*/
-
-ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
-                                  const Bytef *source, uLong sourceLen,
-                                  int level));
-/*
-     Compresses the source buffer into the destination buffer.  The level
-   parameter has the same meaning as in deflateInit.  sourceLen is the byte
-   length of the source buffer.  Upon entry, destLen is the total size of the
-   destination buffer, which must be at least the value returned by
-   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
-   compressed buffer.
-
-     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
-   Z_STREAM_ERROR if the level parameter is invalid.
-*/
-
-ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
-/*
-     compressBound() returns an upper bound on the compressed size after
-   compress() or compress2() on sourceLen bytes.  It would be used before a
-   compress() or compress2() call to allocate the destination buffer.
-*/
-
-ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
-                                   const Bytef *source, uLong sourceLen));
-/*
-     Decompresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer.  Upon entry, destLen is the total size
-   of the destination buffer, which must be large enough to hold the entire
-   uncompressed data.  (The size of the uncompressed data must have been saved
-   previously by the compressor and transmitted to the decompressor by some
-   mechanism outside the scope of this compression library.) Upon exit, destLen
-   is the actual size of the uncompressed buffer.
-
-     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
-*/
-
-
-                        /* gzip file access functions */
-
-/*
-     This library supports reading and writing files in gzip (.gz) format with
-   an interface similar to that of stdio, using the functions that start with
-   "gz".  The gzip format is different from the zlib format.  gzip is a gzip
-   wrapper, documented in RFC 1952, wrapped around a deflate stream.
-*/
-
-typedef voidp gzFile;       /* opaque gzip file descriptor */
-
-/*
-ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
-
-     Opens a gzip (.gz) file for reading or writing.  The mode parameter is as
-   in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
-   a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
-   compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
-   for fixed code compression as in "wb9F".  (See the description of
-   deflateInit2 for more information about the strategy parameter.) Also "a"
-   can be used instead of "w" to request that the gzip stream that will be
-   written be appended to the file.  "+" will result in an error, since reading
-   and writing to the same gzip file is not supported.
-
-     gzopen can be used to read a file which is not in gzip format; in this
-   case gzread will directly read from the file without decompression.
-
-     gzopen returns NULL if the file could not be opened, if there was
-   insufficient memory to allocate the gzFile state, or if an invalid mode was
-   specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
-   errno can be checked to determine if the reason gzopen failed was that the
-   file could not be opened.
-*/
-
-ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
-/*
-     gzdopen associates a gzFile with the file descriptor fd.  File descriptors
-   are obtained from calls like open, dup, creat, pipe or fileno (if the file
-   has been previously opened with fopen).  The mode parameter is as in gzopen.
-
-     The next call of gzclose on the returned gzFile will also close the file
-   descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
-   fd.  If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
-   mode);.  The duplicated descriptor should be saved to avoid a leak, since
-   gzdopen does not close fd if it fails.
-
-     gzdopen returns NULL if there was insufficient memory to allocate the
-   gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
-   provided, or '+' was provided), or if fd is -1.  The file descriptor is not
-   used until the next gz* read, write, seek, or close operation, so gzdopen
-   will not detect if fd is invalid (unless fd is -1).
-*/
-
-ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
-/*
-     Set the internal buffer size used by this library's functions.  The
-   default buffer size is 8192 bytes.  This function must be called after
-   gzopen() or gzdopen(), and before any other calls that read or write the
-   file.  The buffer memory allocation is always deferred to the first read or
-   write.  Two buffers are allocated, either both of the specified size when
-   writing, or one of the specified size and the other twice that size when
-   reading.  A larger buffer size of, for example, 64K or 128K bytes will
-   noticeably increase the speed of decompression (reading).
-
-     The new buffer size also affects the maximum length for gzprintf().
-
-     gzbuffer() returns 0 on success, or -1 on failure, such as being called
-   too late.
-*/
-
-ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
-/*
-     Dynamically update the compression level or strategy.  See the description
-   of deflateInit2 for the meaning of these parameters.
-
-     gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
-   opened for writing.
-*/
-
-ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
-/*
-     Reads the given number of uncompressed bytes from the compressed file.  If
-   the input file was not in gzip format, gzread copies the given number of
-   bytes into the buffer.
-
-     After reaching the end of a gzip stream in the input, gzread will continue
-   to read, looking for another gzip stream, or failing that, reading the rest
-   of the input file directly without decompression.  The entire input file
-   will be read if gzread is called until it returns less than the requested
-   len.
-
-     gzread returns the number of uncompressed bytes actually read, less than
-   len for end of file, or -1 for error.
-*/
-
-ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
-                                voidpc buf, unsigned len));
-/*
-     Writes the given number of uncompressed bytes into the compressed file.
-   gzwrite returns the number of uncompressed bytes written or 0 in case of
-   error.
-*/
-
-ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
-/*
-     Converts, formats, and writes the arguments to the compressed file under
-   control of the format string, as in fprintf.  gzprintf returns the number of
-   uncompressed bytes actually written, or 0 in case of error.  The number of
-   uncompressed bytes written is limited to 8191, or one less than the buffer
-   size given to gzbuffer().  The caller should assure that this limit is not
-   exceeded.  If it is exceeded, then gzprintf() will return an error (0) with
-   nothing written.  In this case, there may also be a buffer overflow with
-   unpredictable consequences, which is possible only if zlib was compiled with
-   the insecure functions sprintf() or vsprintf() because the secure snprintf()
-   or vsnprintf() functions were not available.  This can be determined using
-   zlibCompileFlags().
-*/
-
-ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
-/*
-     Writes the given null-terminated string to the compressed file, excluding
-   the terminating null character.
-
-     gzputs returns the number of characters written, or -1 in case of error.
-*/
-
-ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
-/*
-     Reads bytes from the compressed file until len-1 characters are read, or a
-   newline character is read and transferred to buf, or an end-of-file
-   condition is encountered.  If any characters are read or if len == 1, the
-   string is terminated with a null character.  If no characters are read due
-   to an end-of-file or len < 1, then the buffer is left untouched.
-
-     gzgets returns buf which is a null-terminated string, or it returns NULL
-   for end-of-file or in case of error.  If there was an error, the contents at
-   buf are indeterminate.
-*/
-
-ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
-/*
-     Writes c, converted to an unsigned char, into the compressed file.  gzputc
-   returns the value that was written, or -1 in case of error.
-*/
-
-ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
-/*
-     Reads one byte from the compressed file.  gzgetc returns this byte or -1
-   in case of end of file or error.
-*/
-
-ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
-/*
-     Push one character back onto the stream to be read as the first character
-   on the next read.  At least one character of push-back is allowed.
-   gzungetc() returns the character pushed, or -1 on failure.  gzungetc() will
-   fail if c is -1, and may fail if a character has been pushed but not read
-   yet.  If gzungetc is used immediately after gzopen or gzdopen, at least the
-   output buffer size of pushed characters is allowed.  (See gzbuffer above.)
-   The pushed character will be discarded if the stream is repositioned with
-   gzseek() or gzrewind().
-*/
-
-ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
-/*
-     Flushes all pending output into the compressed file.  The parameter flush
-   is as in the deflate() function.  The return value is the zlib error number
-   (see function gzerror below).  gzflush is only permitted when writing.
-
-     If the flush parameter is Z_FINISH, the remaining data is written and the
-   gzip stream is completed in the output.  If gzwrite() is called again, a new
-   gzip stream will be started in the output.  gzread() is able to read such
-   concatented gzip streams.
-
-     gzflush should be called only when strictly necessary because it will
-   degrade compression if called too often.
-*/
-
-/*
-ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
-                                   z_off_t offset, int whence));
-
-     Sets the starting position for the next gzread or gzwrite on the given
-   compressed file.  The offset represents a number of bytes in the
-   uncompressed data stream.  The whence parameter is defined as in lseek(2);
-   the value SEEK_END is not supported.
-
-     If the file is opened for reading, this function is emulated but can be
-   extremely slow.  If the file is opened for writing, only forward seeks are
-   supported; gzseek then compresses a sequence of zeroes up to the new
-   starting position.
-
-     gzseek returns the resulting offset location as measured in bytes from
-   the beginning of the uncompressed stream, or -1 in case of error, in
-   particular if the file is opened for writing and the new starting position
-   would be before the current position.
-*/
-
-ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
-/*
-     Rewinds the given file. This function is supported only for reading.
-
-     gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
-*/
-
-/*
-ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
-
-     Returns the starting position for the next gzread or gzwrite on the given
-   compressed file.  This position represents a number of bytes in the
-   uncompressed data stream, and is zero when starting, even if appending or
-   reading a gzip stream from the middle of a file using gzdopen().
-
-     gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
-*/
-
-/*
-ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
-
-     Returns the current offset in the file being read or written.  This offset
-   includes the count of bytes that precede the gzip stream, for example when
-   appending or when using gzdopen() for reading.  When reading, the offset
-   does not include as yet unused buffered input.  This information can be used
-   for a progress indicator.  On error, gzoffset() returns -1.
-*/
-
-ZEXTERN int ZEXPORT gzeof OF((gzFile file));
-/*
-     Returns true (1) if the end-of-file indicator has been set while reading,
-   false (0) otherwise.  Note that the end-of-file indicator is set only if the
-   read tried to go past the end of the input, but came up short.  Therefore,
-   just like feof(), gzeof() may return false even if there is no more data to
-   read, in the event that the last read request was for the exact number of
-   bytes remaining in the input file.  This will happen if the input file size
-   is an exact multiple of the buffer size.
-
-     If gzeof() returns true, then the read functions will return no more data,
-   unless the end-of-file indicator is reset by gzclearerr() and the input file
-   has grown since the previous end of file was detected.
-*/
-
-ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
-/*
-     Returns true (1) if file is being copied directly while reading, or false
-   (0) if file is a gzip stream being decompressed.  This state can change from
-   false to true while reading the input file if the end of a gzip stream is
-   reached, but is followed by data that is not another gzip stream.
-
-     If the input file is empty, gzdirect() will return true, since the input
-   does not contain a gzip stream.
-
-     If gzdirect() is used immediately after gzopen() or gzdopen() it will
-   cause buffers to be allocated to allow reading the file to determine if it
-   is a gzip file.  Therefore if gzbuffer() is used, it should be called before
-   gzdirect().
-*/
-
-ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
-/*
-     Flushes all pending output if necessary, closes the compressed file and
-   deallocates the (de)compression state.  Note that once file is closed, you
-   cannot call gzerror with file, since its structures have been deallocated.
-   gzclose must not be called more than once on the same file, just as free
-   must not be called more than once on the same allocation.
-
-     gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
-   file operation error, or Z_OK on success.
-*/
-
-ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
-ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
-/*
-     Same as gzclose(), but gzclose_r() is only for use when reading, and
-   gzclose_w() is only for use when writing or appending.  The advantage to
-   using these instead of gzclose() is that they avoid linking in zlib
-   compression or decompression code that is not used when only reading or only
-   writing respectively.  If gzclose() is used, then both compression and
-   decompression code will be included the application when linking to a static
-   zlib library.
-*/
-
-ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
-/*
-     Returns the error message for the last error which occurred on the given
-   compressed file.  errnum is set to zlib error number.  If an error occurred
-   in the file system and not in the compression library, errnum is set to
-   Z_ERRNO and the application may consult errno to get the exact error code.
-
-     The application must not modify the returned string.  Future calls to
-   this function may invalidate the previously returned string.  If file is
-   closed, then the string previously returned by gzerror will no longer be
-   available.
-
-     gzerror() should be used to distinguish errors from end-of-file for those
-   functions above that do not distinguish those cases in their return values.
-*/
-
-ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
-/*
-     Clears the error and end-of-file flags for file.  This is analogous to the
-   clearerr() function in stdio.  This is useful for continuing to read a gzip
-   file that is being written concurrently.
-*/
-
-
-                        /* checksum functions */
-
-/*
-     These functions are not related to compression but are exported
-   anyway because they might be useful in applications using the compression
-   library.
-*/
-
-ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-/*
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum.  If buf is Z_NULL, this function returns the
-   required initial value for the checksum.
-
-     An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster.
-
-   Usage example:
-
-     uLong adler = adler32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-*/
-
-/*
-ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
-                                          z_off_t len2));
-
-     Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
-   and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
-   each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
-   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
-*/
-
-ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
-/*
-     Update a running CRC-32 with the bytes buf[0..len-1] and return the
-   updated CRC-32.  If buf is Z_NULL, this function returns the required
-   initial value for the for the crc.  Pre- and post-conditioning (one's
-   complement) is performed within this function so it shouldn't be done by the
-   application.
-
-   Usage example:
-
-     uLong crc = crc32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       crc = crc32(crc, buffer, length);
-     }
-     if (crc != original_crc) error();
-*/
-
-/*
-ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
-
-     Combine two CRC-32 check values into one.  For two sequences of bytes,
-   seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
-   calculated for each, crc1 and crc2.  crc32_combine() returns the CRC-32
-   check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
-   len2.
-*/
-
-
-                        /* various hacks, don't look :) */
-
-/* deflateInit and inflateInit are macros to allow checking the zlib version
- * and the compiler's view of z_stream:
- */
-ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
-                                     const char *version, int stream_size));
-ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
-                                     const char *version, int stream_size));
-ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
-                                      int windowBits, int memLevel,
-                                      int strategy, const char *version,
-                                      int stream_size));
-ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
-                                      const char *version, int stream_size));
-ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
-                                         unsigned char FAR *window,
-                                         const char *version,
-                                         int stream_size));
-#define deflateInit(strm, level) \
-        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit(strm) \
-        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
-        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-                      (strategy),           ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
-        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
-#define inflateBackInit(strm, windowBits, window) \
-        inflateBackInit_((strm), (windowBits), (window), \
-                                            ZLIB_VERSION, sizeof(z_stream))
-
-/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
- * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
- * both are true, the application gets the *64 functions, and the regular
- * functions are changed to 64 bits) -- in case these are set on systems
- * without large file support, _LFS64_LARGEFILE must also be true
- */
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
-   ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-   ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
-   ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
-   ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
-   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
-   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
-#endif
-
-#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
-#  define gzopen gzopen64
-#  define gzseek gzseek64
-#  define gztell gztell64
-#  define gzoffset gzoffset64
-#  define adler32_combine adler32_combine64
-#  define crc32_combine crc32_combine64
-#  ifdef _LARGEFILE64_SOURCE
-     ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-     ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
-     ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
-     ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
-     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
-     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
-#  endif
-#else
-   ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
-   ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
-   ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
-   ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
-   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
-   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
-#endif
-
-/* hack for buggy compilers */
-#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
-    struct internal_state {int dummy;};
-#endif
-
-/* undocumented functions */
-ZEXTERN const char   * ZEXPORT zError           OF((int));
-ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
-ZEXTERN const unsigned long FAR * ZEXPORT get_crc_table    OF((void));
-ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* ZLIB_H */
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/zutil.c	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,342 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005, 2010 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include "zutil.h"
-
-#ifndef NO_DUMMY_DECL
-struct internal_state      {int dummy;}; /* for buggy compilers */
-#endif
-
-const char * const z_errmsg[10] = {
-"need dictionary",     /* Z_NEED_DICT       2  */
-"stream end",          /* Z_STREAM_END      1  */
-"",                    /* Z_OK              0  */
-"file error",          /* Z_ERRNO         (-1) */
-"stream error",        /* Z_STREAM_ERROR  (-2) */
-"data error",          /* Z_DATA_ERROR    (-3) */
-"insufficient memory", /* Z_MEM_ERROR     (-4) */
-"buffer error",        /* Z_BUF_ERROR     (-5) */
-"incompatible version",/* Z_VERSION_ERROR (-6) */
-""};
-
-
-const char * ZEXPORT zlibVersion()
-{
-    return ZLIB_VERSION;
-}
-
-uLong ZEXPORT zlibCompileFlags()
-{
-    uLong flags;
-
-    flags = 0;
-    switch ((int)(sizeof(uInt))) {
-    case 2:     break;
-    case 4:     flags += 1;     break;
-    case 8:     flags += 2;     break;
-    default:    flags += 3;
-    }
-    switch ((int)(sizeof(uLong))) {
-    case 2:     break;
-    case 4:     flags += 1 << 2;        break;
-    case 8:     flags += 2 << 2;        break;
-    default:    flags += 3 << 2;
-    }
-    switch ((int)(sizeof(voidpf))) {
-    case 2:     break;
-    case 4:     flags += 1 << 4;        break;
-    case 8:     flags += 2 << 4;        break;
-    default:    flags += 3 << 4;
-    }
-    switch ((int)(sizeof(z_off_t))) {
-    case 2:     break;
-    case 4:     flags += 1 << 6;        break;
-    case 8:     flags += 2 << 6;        break;
-    default:    flags += 3 << 6;
-    }
-#ifdef DEBUG
-    flags += 1 << 8;
-#endif
-#if defined(ASMV) || defined(ASMINF)
-    flags += 1 << 9;
-#endif
-#ifdef ZLIB_WINAPI
-    flags += 1 << 10;
-#endif
-#ifdef BUILDFIXED
-    flags += 1 << 12;
-#endif
-#ifdef DYNAMIC_CRC_TABLE
-    flags += 1 << 13;
-#endif
-#ifdef NO_GZCOMPRESS
-    flags += 1L << 16;
-#endif
-#ifdef NO_GZIP
-    flags += 1L << 17;
-#endif
-#ifdef PKZIP_BUG_WORKAROUND
-    flags += 1L << 20;
-#endif
-#ifdef FASTEST
-    flags += 1L << 21;
-#endif
-#ifdef STDC
-#  ifdef NO_vsnprintf
-        flags += 1L << 25;
-#    ifdef HAS_vsprintf_void
-        flags += 1L << 26;
-#    endif
-#  else
-#    ifdef HAS_vsnprintf_void
-        flags += 1L << 26;
-#    endif
-#  endif
-#else
-        flags += 1L << 24;
-#  ifdef NO_snprintf
-        flags += 1L << 25;
-#    ifdef HAS_sprintf_void
-        flags += 1L << 26;
-#    endif
-#  else
-#    ifdef HAS_snprintf_void
-        flags += 1L << 26;
-#    endif
-#  endif
-#endif
-    return flags;
-}
-
-#ifdef DEBUG
-
-#  ifndef verbose
-#    define verbose 0
-#  endif
-int ZLIB_INTERNAL z_verbose = verbose;
-
-void ZLIB_INTERNAL z_error (m)
-    char *m;
-{
-    fprintf(stderr, "%s\n", m);
-    exit(1);
-}
-#endif
-
-/* exported to allow conversion of error code to string for compress() and
- * uncompress()
- */
-const char * ZEXPORT zError(err)
-    int err;
-{
-    return ERR_MSG(err);
-}
-
-#if defined(_WIN32_WCE)
-    /* The Microsoft C Run-Time Library for Windows CE doesn't have
-     * errno.  We define it as a global variable to simplify porting.
-     * Its value is always 0 and should not be used.
-     */
-    int errno = 0;
-#endif
-
-#ifndef HAVE_MEMCPY
-
-void ZLIB_INTERNAL zmemcpy(dest, source, len)
-    Bytef* dest;
-    const Bytef* source;
-    uInt  len;
-{
-    if (len == 0) return;
-    do {
-        *dest++ = *source++; /* ??? to be unrolled */
-    } while (--len != 0);
-}
-
-int ZLIB_INTERNAL zmemcmp(s1, s2, len)
-    const Bytef* s1;
-    const Bytef* s2;
-    uInt  len;
-{
-    uInt j;
-
-    for (j = 0; j < len; j++) {
-        if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
-    }
-    return 0;
-}
-
-void ZLIB_INTERNAL zmemzero(dest, len)
-    Bytef* dest;
-    uInt  len;
-{
-    if (len == 0) return;
-    do {
-        *dest++ = 0;  /* ??? to be unrolled */
-    } while (--len != 0);
-}
-#endif
-
-
-#ifdef SYS16BIT
-
-#ifdef __TURBOC__
-/* Turbo C in 16-bit mode */
-
-#  define MY_ZCALLOC
-
-/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
- * and farmalloc(64K) returns a pointer with an offset of 8, so we
- * must fix the pointer. Warning: the pointer must be put back to its
- * original form in order to free it, use zcfree().
- */
-
-#define MAX_PTR 10
-/* 10*64K = 640K */
-
-local int next_ptr = 0;
-
-typedef struct ptr_table_s {
-    voidpf org_ptr;
-    voidpf new_ptr;
-} ptr_table;
-
-local ptr_table table[MAX_PTR];
-/* This table is used to remember the original form of pointers
- * to large buffers (64K). Such pointers are normalized with a zero offset.
- * Since MSDOS is not a preemptive multitasking OS, this table is not
- * protected from concurrent access. This hack doesn't work anyway on
- * a protected system like OS/2. Use Microsoft C instead.
- */
-
-voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
-    voidpf buf = opaque; /* just to make some compilers happy */
-    ulg bsize = (ulg)items*size;
-
-    /* If we allocate less than 65520 bytes, we assume that farmalloc
-     * will return a usable pointer which doesn't have to be normalized.
-     */
-    if (bsize < 65520L) {
-        buf = farmalloc(bsize);
-        if (*(ush*)&buf != 0) return buf;
-    } else {
-        buf = farmalloc(bsize + 16L);
-    }
-    if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
-    table[next_ptr].org_ptr = buf;
-
-    /* Normalize the pointer to seg:0 */
-    *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
-    *(ush*)&buf = 0;
-    table[next_ptr++].new_ptr = buf;
-    return buf;
-}
-
-void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
-{
-    int n;
-    if (*(ush*)&ptr != 0) { /* object < 64K */
-        farfree(ptr);
-        return;
-    }
-    /* Find the original pointer */
-    for (n = 0; n < next_ptr; n++) {
-        if (ptr != table[n].new_ptr) continue;
-
-        farfree(table[n].org_ptr);
-        while (++n < next_ptr) {
-            table[n-1] = table[n];
-        }
-        next_ptr--;
-        return;
-    }
-    ptr = opaque; /* just to make some compilers happy */
-    Assert(0, "zcfree: ptr not found");
-}
-
-#endif /* __TURBOC__ */
-
-
-#ifdef M_I86
-/* Microsoft C in 16-bit mode */
-
-#  define MY_ZCALLOC
-
-#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
-#  define _halloc  halloc
-#  define _hfree   hfree
-#endif
-
-voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
-{
-    if (opaque) opaque = 0; /* to make compiler happy */
-    return _halloc((long)items, size);
-}
-
-void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
-{
-    if (opaque) opaque = 0; /* to make compiler happy */
-    _hfree(ptr);
-}
-
-#endif /* M_I86 */
-
-#endif /* SYS16BIT */
-
-
-#ifndef MY_ZCALLOC /* Any system without a special alloc function */
-
-#ifndef STDC
-extern voidp  malloc OF((uInt size));
-extern voidp  calloc OF((uInt items, uInt size));
-extern void   free   OF((voidpf ptr));
-#endif
-
-voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
-    voidpf opaque;
-    unsigned items;
-    unsigned size;
-{
-    if (opaque) items += size - size; /* make compiler happy */
-    return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
-                              (voidpf)calloc(items, size);
-}
-
-void ZLIB_INTERNAL zcfree (opaque, ptr)
-    voidpf opaque;
-    voidpf ptr;
-{
-    free(ptr);
-    if (opaque) return; /* make compiler happy */
-}
-
-#endif /* MY_ZCALLOC */
--- a/jdk/src/share/native/java/util/zip/zlib-1.2.5/zutil.h	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,298 +0,0 @@
-/*
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* @(#) $Id$ */
-
-#ifndef ZUTIL_H
-#define ZUTIL_H
-
-#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
-#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
-#else
-#  define ZLIB_INTERNAL
-#endif
-
-#include "zlib.h"
-
-#ifdef STDC
-#  if !(defined(_WIN32_WCE) && defined(_MSC_VER))
-#    include <stddef.h>
-#  endif
-#  include <string.h>
-#  include <stdlib.h>
-#endif
-
-#ifndef local
-#  define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-typedef unsigned char  uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long  ulg;
-
-extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
-/* (size given to avoid silly warnings with Visual C++) */
-
-#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
-
-#define ERR_RETURN(strm,err) \
-  return (strm->msg = (char*)ERR_MSG(err), (err))
-/* To be used only when the state is known to be valid */
-
-        /* common constants */
-
-#ifndef DEF_WBITS
-#  define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-#  define DEF_MEM_LEVEL 8
-#else
-#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES    2
-/* The three kinds of block type */
-
-#define MIN_MATCH  3
-#define MAX_MATCH  258
-/* The minimum and maximum match lengths */
-
-#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
-
-        /* target dependencies */
-
-#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
-#  define OS_CODE  0x00
-#  if defined(__TURBOC__) || defined(__BORLANDC__)
-#    if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
-       /* Allow compilation with ANSI keywords only enabled */
-       void _Cdecl farfree( void *block );
-       void *_Cdecl farmalloc( unsigned long nbytes );
-#    else
-#      include <alloc.h>
-#    endif
-#  else /* MSC or DJGPP */
-#    include <malloc.h>
-#  endif
-#endif
-
-#ifdef AMIGA
-#  define OS_CODE  0x01
-#endif
-
-#if defined(VAXC) || defined(VMS)
-#  define OS_CODE  0x02
-#  define F_OPEN(name, mode) \
-     fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
-#endif
-
-#if defined(ATARI) || defined(atarist)
-#  define OS_CODE  0x05
-#endif
-
-#ifdef OS2
-#  define OS_CODE  0x06
-#  ifdef M_I86
-#    include <malloc.h>
-#  endif
-#endif
-
-#if defined(MACOS) || defined(TARGET_OS_MAC)
-#  define OS_CODE  0x07
-#  if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
-#    include <unix.h> /* for fdopen */
-#  else
-#    ifndef fdopen
-#      define fdopen(fd,mode) NULL /* No fdopen() */
-#    endif
-#  endif
-#endif
-
-#ifdef TOPS20
-#  define OS_CODE  0x0a
-#endif
-
-#ifdef WIN32
-#  ifndef __CYGWIN__  /* Cygwin is Unix, not Win32 */
-#    define OS_CODE  0x0b
-#  endif
-#endif
-
-#ifdef __50SERIES /* Prime/PRIMOS */
-#  define OS_CODE  0x0f
-#endif
-
-#if defined(_BEOS_) || defined(RISCOS)
-#  define fdopen(fd,mode) NULL /* No fdopen() */
-#endif
-
-#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX
-#  if defined(_WIN32_WCE)
-#    define fdopen(fd,mode) NULL /* No fdopen() */
-#    ifndef _PTRDIFF_T_DEFINED
-       typedef int ptrdiff_t;
-#      define _PTRDIFF_T_DEFINED
-#    endif
-#  else
-#    define fdopen(fd,type)  _fdopen(fd,type)
-#  endif
-#endif
-
-#if defined(__BORLANDC__)
-  #pragma warn -8004
-  #pragma warn -8008
-  #pragma warn -8066
-#endif
-
-/* provide prototypes for these when building zlib without LFS */
-#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
-    ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
-    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
-#endif
-
-        /* common defaults */
-
-#ifndef OS_CODE
-#  define OS_CODE  0x03  /* assume Unix */
-#endif
-
-#ifndef F_OPEN
-#  define F_OPEN(name, mode) fopen((name), (mode))
-#endif
-
-         /* functions */
-
-#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
-#  ifndef HAVE_VSNPRINTF
-#    define HAVE_VSNPRINTF
-#  endif
-#endif
-#if defined(__CYGWIN__)
-#  ifndef HAVE_VSNPRINTF
-#    define HAVE_VSNPRINTF
-#  endif
-#endif
-#ifndef HAVE_VSNPRINTF
-#  ifdef MSDOS
-     /* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
-        but for now we just assume it doesn't. */
-#    define NO_vsnprintf
-#  endif
-#  ifdef __TURBOC__
-#    define NO_vsnprintf
-#  endif
-#  ifdef WIN32
-     /* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
-#    if !defined(vsnprintf) && !defined(NO_vsnprintf)
-#      if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
-#         define vsnprintf _vsnprintf
-#      endif
-#    endif
-#  endif
-#  ifdef __SASC
-#    define NO_vsnprintf
-#  endif
-#endif
-#ifdef VMS
-#  define NO_vsnprintf
-#endif
-
-#if defined(pyr)
-#  define NO_MEMCPY
-#endif
-#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
- /* Use our own functions for small and medium model with MSC <= 5.0.
-  * You may have to use the same strategy for Borland C (untested).
-  * The __SC__ check is for Symantec.
-  */
-#  define NO_MEMCPY
-#endif
-#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
-#  define HAVE_MEMCPY
-#endif
-#ifdef HAVE_MEMCPY
-#  ifdef SMALL_MEDIUM /* MSDOS small or medium model */
-#    define zmemcpy _fmemcpy
-#    define zmemcmp _fmemcmp
-#    define zmemzero(dest, len) _fmemset(dest, 0, len)
-#  else
-#    define zmemcpy memcpy
-#    define zmemcmp memcmp
-#    define zmemzero(dest, len) memset(dest, 0, len)
-#  endif
-#else
-   void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
-   int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
-   void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
-#endif
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  include <stdio.h>
-   extern int ZLIB_INTERNAL z_verbose;
-   extern void ZLIB_INTERNAL z_error OF((char *m));
-#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-#  define Trace(x) {if (z_verbose>=0) fprintf x ;}
-#  define Tracev(x) {if (z_verbose>0) fprintf x ;}
-#  define Tracevv(x) {if (z_verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-
-voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
-                        unsigned size));
-void ZLIB_INTERNAL zcfree  OF((voidpf opaque, voidpf ptr));
-
-#define ZALLOC(strm, items, size) \
-           (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
-#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
-
-#endif /* ZUTIL_H */
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/ChangeLog	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,1472 @@
+
+                ChangeLog file for zlib
+
+Changes in 1.2.8 (28 Apr 2013)
+- Update contrib/minizip/iowin32.c for Windows RT [Vollant]
+- Do not force Z_CONST for C++
+- Clean up contrib/vstudio [Ro§]
+- Correct spelling error in zlib.h
+- Fix mixed line endings in contrib/vstudio
+
+Changes in 1.2.7.3 (13 Apr 2013)
+- Fix version numbers and DLL names in contrib/vstudio/*/zlib.rc
+
+Changes in 1.2.7.2 (13 Apr 2013)
+- Change check for a four-byte type back to hexadecimal
+- Fix typo in win32/Makefile.msc
+- Add casts in gzwrite.c for pointer differences
+
+Changes in 1.2.7.1 (24 Mar 2013)
+- Replace use of unsafe string functions with snprintf if available
+- Avoid including stddef.h on Windows for Z_SOLO compile [Niessink]
+- Fix gzgetc undefine when Z_PREFIX set [Turk]
+- Eliminate use of mktemp in Makefile (not always available)
+- Fix bug in 'F' mode for gzopen()
+- Add inflateGetDictionary() function
+- Correct comment in deflate.h
+- Use _snprintf for snprintf in Microsoft C
+- On Darwin, only use /usr/bin/libtool if libtool is not Apple
+- Delete "--version" file if created by "ar --version" [Richard G.]
+- Fix configure check for veracity of compiler error return codes
+- Fix CMake compilation of static lib for MSVC2010 x64
+- Remove unused variable in infback9.c
+- Fix argument checks in gzlog_compress() and gzlog_write()
+- Clean up the usage of z_const and respect const usage within zlib
+- Clean up examples/gzlog.[ch] comparisons of different types
+- Avoid shift equal to bits in type (caused endless loop)
+- Fix unintialized value bug in gzputc() introduced by const patches
+- Fix memory allocation error in examples/zran.c [Nor]
+- Fix bug where gzopen(), gzclose() would write an empty file
+- Fix bug in gzclose() when gzwrite() runs out of memory
+- Check for input buffer malloc failure in examples/gzappend.c
+- Add note to contrib/blast to use binary mode in stdio
+- Fix comparisons of differently signed integers in contrib/blast
+- Check for invalid code length codes in contrib/puff
+- Fix serious but very rare decompression bug in inftrees.c
+- Update inflateBack() comments, since inflate() can be faster
+- Use underscored I/O function names for WINAPI_FAMILY
+- Add _tr_flush_bits to the external symbols prefixed by --zprefix
+- Add contrib/vstudio/vc10 pre-build step for static only
+- Quote --version-script argument in CMakeLists.txt
+- Don't specify --version-script on Apple platforms in CMakeLists.txt
+- Fix casting error in contrib/testzlib/testzlib.c
+- Fix types in contrib/minizip to match result of get_crc_table()
+- Simplify contrib/vstudio/vc10 with 'd' suffix
+- Add TOP support to win32/Makefile.msc
+- Suport i686 and amd64 assembler builds in CMakeLists.txt
+- Fix typos in the use of _LARGEFILE64_SOURCE in zconf.h
+- Add vc11 and vc12 build files to contrib/vstudio
+- Add gzvprintf() as an undocumented function in zlib
+- Fix configure for Sun shell
+- Remove runtime check in configure for four-byte integer type
+- Add casts and consts to ease user conversion to C++
+- Add man pages for minizip and miniunzip
+- In Makefile uninstall, don't rm if preceding cd fails
+- Do not return Z_BUF_ERROR if deflateParam() has nothing to write
+
+Changes in 1.2.7 (2 May 2012)
+- Replace use of memmove() with a simple copy for portability
+- Test for existence of strerror
+- Restore gzgetc_ for backward compatibility with 1.2.6
+- Fix build with non-GNU make on Solaris
+- Require gcc 4.0 or later on Mac OS X to use the hidden attribute
+- Include unistd.h for Watcom C
+- Use __WATCOMC__ instead of __WATCOM__
+- Do not use the visibility attribute if NO_VIZ defined
+- Improve the detection of no hidden visibility attribute
+- Avoid using __int64 for gcc or solo compilation
+- Cast to char * in gzprintf to avoid warnings [Zinser]
+- Fix make_vms.com for VAX [Zinser]
+- Don't use library or built-in byte swaps
+- Simplify test and use of gcc hidden attribute
+- Fix bug in gzclose_w() when gzwrite() fails to allocate memory
+- Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen()
+- Fix bug in test/minigzip.c for configure --solo
+- Fix contrib/vstudio project link errors [Mohanathas]
+- Add ability to choose the builder in make_vms.com [Schweda]
+- Add DESTDIR support to mingw32 win32/Makefile.gcc
+- Fix comments in win32/Makefile.gcc for proper usage
+- Allow overriding the default install locations for cmake
+- Generate and install the pkg-config file with cmake
+- Build both a static and a shared version of zlib with cmake
+- Include version symbols for cmake builds
+- If using cmake with MSVC, add the source directory to the includes
+- Remove unneeded EXTRA_CFLAGS from win32/Makefile.gcc [Truta]
+- Move obsolete emx makefile to old [Truta]
+- Allow the use of -Wundef when compiling or using zlib
+- Avoid the use of the -u option with mktemp
+- Improve inflate() documentation on the use of Z_FINISH
+- Recognize clang as gcc
+- Add gzopen_w() in Windows for wide character path names
+- Rename zconf.h in CMakeLists.txt to move it out of the way
+- Add source directory in CMakeLists.txt for building examples
+- Look in build directory for zlib.pc in CMakeLists.txt
+- Remove gzflags from zlibvc.def in vc9 and vc10
+- Fix contrib/minizip compilation in the MinGW environment
+- Update ./configure for Solaris, support --64 [Mooney]
+- Remove -R. from Solaris shared build (possible security issue)
+- Avoid race condition for parallel make (-j) running example
+- Fix type mismatch between get_crc_table() and crc_table
+- Fix parsing of version with "-" in CMakeLists.txt [Snider, Ziegler]
+- Fix the path to zlib.map in CMakeLists.txt
+- Force the native libtool in Mac OS X to avoid GNU libtool [Beebe]
+- Add instructions to win32/Makefile.gcc for shared install [Torri]
+
+Changes in 1.2.6.1 (12 Feb 2012)
+- Avoid the use of the Objective-C reserved name "id"
+- Include io.h in gzguts.h for Microsoft compilers
+- Fix problem with ./configure --prefix and gzgetc macro
+- Include gz_header definition when compiling zlib solo
+- Put gzflags() functionality back in zutil.c
+- Avoid library header include in crc32.c for Z_SOLO
+- Use name in GCC_CLASSIC as C compiler for coverage testing, if set
+- Minor cleanup in contrib/minizip/zip.c [Vollant]
+- Update make_vms.com [Zinser]
+- Remove unnecessary gzgetc_ function
+- Use optimized byte swap operations for Microsoft and GNU [Snyder]
+- Fix minor typo in zlib.h comments [Rzesniowiecki]
+
+Changes in 1.2.6 (29 Jan 2012)
+- Update the Pascal interface in contrib/pascal
+- Fix function numbers for gzgetc_ in zlibvc.def files
+- Fix configure.ac for contrib/minizip [Schiffer]
+- Fix large-entry detection in minizip on 64-bit systems [Schiffer]
+- Have ./configure use the compiler return code for error indication
+- Fix CMakeLists.txt for cross compilation [McClure]
+- Fix contrib/minizip/zip.c for 64-bit architectures [Dalsnes]
+- Fix compilation of contrib/minizip on FreeBSD [Marquez]
+- Correct suggested usages in win32/Makefile.msc [Shachar, Horvath]
+- Include io.h for Turbo C / Borland C on all platforms [Truta]
+- Make version explicit in contrib/minizip/configure.ac [Bosmans]
+- Avoid warning for no encryption in contrib/minizip/zip.c [Vollant]
+- Minor cleanup up contrib/minizip/unzip.c [Vollant]
+- Fix bug when compiling minizip with C++ [Vollant]
+- Protect for long name and extra fields in contrib/minizip [Vollant]
+- Avoid some warnings in contrib/minizip [Vollant]
+- Add -I../.. -L../.. to CFLAGS for minizip and miniunzip
+- Add missing libs to minizip linker command
+- Add support for VPATH builds in contrib/minizip
+- Add an --enable-demos option to contrib/minizip/configure
+- Add the generation of configure.log by ./configure
+- Exit when required parameters not provided to win32/Makefile.gcc
+- Have gzputc return the character written instead of the argument
+- Use the -m option on ldconfig for BSD systems [Tobias]
+- Correct in zlib.map when deflateResetKeep was added
+
+Changes in 1.2.5.3 (15 Jan 2012)
+- Restore gzgetc function for binary compatibility
+- Do not use _lseeki64 under Borland C++ [Truta]
+- Update win32/Makefile.msc to build test/*.c [Truta]
+- Remove old/visualc6 given CMakefile and other alternatives
+- Update AS400 build files and documentation [Monnerat]
+- Update win32/Makefile.gcc to build test/*.c [Truta]
+- Permit stronger flushes after Z_BLOCK flushes
+- Avoid extraneous empty blocks when doing empty flushes
+- Permit Z_NULL arguments to deflatePending
+- Allow deflatePrime() to insert bits in the middle of a stream
+- Remove second empty static block for Z_PARTIAL_FLUSH
+- Write out all of the available bits when using Z_BLOCK
+- Insert the first two strings in the hash table after a flush
+
+Changes in 1.2.5.2 (17 Dec 2011)
+- fix ld error: unable to find version dependency 'ZLIB_1.2.5'
+- use relative symlinks for shared libs
+- Avoid searching past window for Z_RLE strategy
+- Assure that high-water mark initialization is always applied in deflate
+- Add assertions to fill_window() in deflate.c to match comments
+- Update python link in README
+- Correct spelling error in gzread.c
+- Fix bug in gzgets() for a concatenated empty gzip stream
+- Correct error in comment for gz_make()
+- Change gzread() and related to ignore junk after gzip streams
+- Allow gzread() and related to continue after gzclearerr()
+- Allow gzrewind() and gzseek() after a premature end-of-file
+- Simplify gzseek() now that raw after gzip is ignored
+- Change gzgetc() to a macro for speed (~40% speedup in testing)
+- Fix gzclose() to return the actual error last encountered
+- Always add large file support for windows
+- Include zconf.h for windows large file support
+- Include zconf.h.cmakein for windows large file support
+- Update zconf.h.cmakein on make distclean
+- Merge vestigial vsnprintf determination from zutil.h to gzguts.h
+- Clarify how gzopen() appends in zlib.h comments
+- Correct documentation of gzdirect() since junk at end now ignored
+- Add a transparent write mode to gzopen() when 'T' is in the mode
+- Update python link in zlib man page
+- Get inffixed.h and MAKEFIXED result to match
+- Add a ./config --solo option to make zlib subset with no libary use
+- Add undocumented inflateResetKeep() function for CAB file decoding
+- Add --cover option to ./configure for gcc coverage testing
+- Add #define ZLIB_CONST option to use const in the z_stream interface
+- Add comment to gzdopen() in zlib.h to use dup() when using fileno()
+- Note behavior of uncompress() to provide as much data as it can
+- Add files in contrib/minizip to aid in building libminizip
+- Split off AR options in Makefile.in and configure
+- Change ON macro to Z_ARG to avoid application conflicts
+- Facilitate compilation with Borland C++ for pragmas and vsnprintf
+- Include io.h for Turbo C / Borland C++
+- Move example.c and minigzip.c to test/
+- Simplify incomplete code table filling in inflate_table()
+- Remove code from inflate.c and infback.c that is impossible to execute
+- Test the inflate code with full coverage
+- Allow deflateSetDictionary, inflateSetDictionary at any time (in raw)
+- Add deflateResetKeep and fix inflateResetKeep to retain dictionary
+- Fix gzwrite.c to accommodate reduced memory zlib compilation
+- Have inflate() with Z_FINISH avoid the allocation of a window
+- Do not set strm->adler when doing raw inflate
+- Fix gzeof() to behave just like feof() when read is not past end of file
+- Fix bug in gzread.c when end-of-file is reached
+- Avoid use of Z_BUF_ERROR in gz* functions except for premature EOF
+- Document gzread() capability to read concurrently written files
+- Remove hard-coding of resource compiler in CMakeLists.txt [Blammo]
+
+Changes in 1.2.5.1 (10 Sep 2011)
+- Update FAQ entry on shared builds (#13)
+- Avoid symbolic argument to chmod in Makefile.in
+- Fix bug and add consts in contrib/puff [Oberhumer]
+- Update contrib/puff/zeros.raw test file to have all block types
+- Add full coverage test for puff in contrib/puff/Makefile
+- Fix static-only-build install in Makefile.in
+- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno]
+- Add libz.a dependency to shared in Makefile.in for parallel builds
+- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out
+- Replace $(...) with `...` in configure for non-bash sh [Bowler]
+- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen]
+- Add solaris* to Linux* in configure to allow gcc use [Groffen]
+- Add *bsd* to Linux* case in configure [Bar-Lev]
+- Add inffast.obj to dependencies in win32/Makefile.msc
+- Correct spelling error in deflate.h [Kohler]
+- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc
+- Add test to configure for GNU C looking for gcc in output of $cc -v
+- Add zlib.pc generation to win32/Makefile.gcc [Weigelt]
+- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not
+- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense
+- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser)
+- Make stronger test in zconf.h to include unistd.h for LFS
+- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack]
+- Fix zlib.h LFS support when Z_PREFIX used
+- Add updated as400 support (removed from old) [Monnerat]
+- Avoid deflate sensitivity to volatile input data
+- Avoid division in adler32_combine for NO_DIVIDE
+- Clarify the use of Z_FINISH with deflateBound() amount of space
+- Set binary for output file in puff.c
+- Use u4 type for crc_table to avoid conversion warnings
+- Apply casts in zlib.h to avoid conversion warnings
+- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller]
+- Improve inflateSync() documentation to note indeterminancy
+- Add deflatePending() function to return the amount of pending output
+- Correct the spelling of "specification" in FAQ [Randers-Pehrson]
+- Add a check in configure for stdarg.h, use for gzprintf()
+- Check that pointers fit in ints when gzprint() compiled old style
+- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler]
+- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt]
+- Add debug records in assmebler code [Londer]
+- Update RFC references to use http://tools.ietf.org/html/... [Li]
+- Add --archs option, use of libtool to configure for Mac OS X [Borstel]
+
+Changes in 1.2.5 (19 Apr 2010)
+- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev]
+- Default to libdir as sharedlibdir in configure [Nieder]
+- Update copyright dates on modified source files
+- Update trees.c to be able to generate modified trees.h
+- Exit configure for MinGW, suggesting win32/Makefile.gcc
+- Check for NULL path in gz_open [Homurlu]
+
+Changes in 1.2.4.5 (18 Apr 2010)
+- Set sharedlibdir in configure [Torok]
+- Set LDFLAGS in Makefile.in [Bar-Lev]
+- Avoid mkdir objs race condition in Makefile.in [Bowler]
+- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays
+- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C
+- Don't use hidden attribute when it is a warning generator (e.g. Solaris)
+
+Changes in 1.2.4.4 (18 Apr 2010)
+- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok]
+- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty
+- Try to use bash or ksh regardless of functionality of /bin/sh
+- Fix configure incompatibility with NetBSD sh
+- Remove attempt to run under bash or ksh since have better NetBSD fix
+- Fix win32/Makefile.gcc for MinGW [Bar-Lev]
+- Add diagnostic messages when using CROSS_PREFIX in configure
+- Added --sharedlibdir option to configure [Weigelt]
+- Use hidden visibility attribute when available [Frysinger]
+
+Changes in 1.2.4.3 (10 Apr 2010)
+- Only use CROSS_PREFIX in configure for ar and ranlib if they exist
+- Use CROSS_PREFIX for nm [Bar-Lev]
+- Assume _LARGEFILE64_SOURCE defined is equivalent to true
+- Avoid use of undefined symbols in #if with && and ||
+- Make *64 prototypes in gzguts.h consistent with functions
+- Add -shared load option for MinGW in configure [Bowler]
+- Move z_off64_t to public interface, use instead of off64_t
+- Remove ! from shell test in configure (not portable to Solaris)
+- Change +0 macro tests to -0 for possibly increased portability
+
+Changes in 1.2.4.2 (9 Apr 2010)
+- Add consistent carriage returns to readme.txt's in masmx86 and masmx64
+- Really provide prototypes for *64 functions when building without LFS
+- Only define unlink() in minigzip.c if unistd.h not included
+- Update README to point to contrib/vstudio project files
+- Move projects/vc6 to old/ and remove projects/
+- Include stdlib.h in minigzip.c for setmode() definition under WinCE
+- Clean up assembler builds in win32/Makefile.msc [Rowe]
+- Include sys/types.h for Microsoft for off_t definition
+- Fix memory leak on error in gz_open()
+- Symbolize nm as $NM in configure [Weigelt]
+- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt]
+- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined
+- Fix bug in gzeof() to take into account unused input data
+- Avoid initialization of structures with variables in puff.c
+- Updated win32/README-WIN32.txt [Rowe]
+
+Changes in 1.2.4.1 (28 Mar 2010)
+- Remove the use of [a-z] constructs for sed in configure [gentoo 310225]
+- Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech]
+- Restore "for debugging" comment on sprintf() in gzlib.c
+- Remove fdopen for MVS from gzguts.h
+- Put new README-WIN32.txt in win32 [Rowe]
+- Add check for shell to configure and invoke another shell if needed
+- Fix big fat stinking bug in gzseek() on uncompressed files
+- Remove vestigial F_OPEN64 define in zutil.h
+- Set and check the value of _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE
+- Avoid errors on non-LFS systems when applications define LFS macros
+- Set EXE to ".exe" in configure for MINGW [Kahle]
+- Match crc32() in crc32.c exactly to the prototype in zlib.h [Sherrill]
+- Add prefix for cross-compilation in win32/makefile.gcc [Bar-Lev]
+- Add DLL install in win32/makefile.gcc [Bar-Lev]
+- Allow Linux* or linux* from uname in configure [Bar-Lev]
+- Allow ldconfig to be redefined in configure and Makefile.in [Bar-Lev]
+- Add cross-compilation prefixes to configure [Bar-Lev]
+- Match type exactly in gz_load() invocation in gzread.c
+- Match type exactly of zcalloc() in zutil.c to zlib.h alloc_func
+- Provide prototypes for *64 functions when building zlib without LFS
+- Don't use -lc when linking shared library on MinGW
+- Remove errno.h check in configure and vestigial errno code in zutil.h
+
+Changes in 1.2.4 (14 Mar 2010)
+- Fix VER3 extraction in configure for no fourth subversion
+- Update zlib.3, add docs to Makefile.in to make .pdf out of it
+- Add zlib.3.pdf to distribution
+- Don't set error code in gzerror() if passed pointer is NULL
+- Apply destination directory fixes to CMakeLists.txt [Lowman]
+- Move #cmakedefine's to a new zconf.in.cmakein
+- Restore zconf.h for builds that don't use configure or cmake
+- Add distclean to dummy Makefile for convenience
+- Update and improve INDEX, README, and FAQ
+- Update CMakeLists.txt for the return of zconf.h [Lowman]
+- Update contrib/vstudio/vc9 and vc10 [Vollant]
+- Change libz.dll.a back to libzdll.a in win32/Makefile.gcc
+- Apply license and readme changes to contrib/asm686 [Raiter]
+- Check file name lengths and add -c option in minigzip.c [Li]
+- Update contrib/amd64 and contrib/masmx86/ [Vollant]
+- Avoid use of "eof" parameter in trees.c to not shadow library variable
+- Update make_vms.com for removal of zlibdefs.h [Zinser]
+- Update assembler code and vstudio projects in contrib [Vollant]
+- Remove outdated assembler code contrib/masm686 and contrib/asm586
+- Remove old vc7 and vc8 from contrib/vstudio
+- Update win32/Makefile.msc, add ZLIB_VER_SUBREVISION [Rowe]
+- Fix memory leaks in gzclose_r() and gzclose_w(), file leak in gz_open()
+- Add contrib/gcc_gvmat64 for longest_match and inflate_fast [Vollant]
+- Remove *64 functions from win32/zlib.def (they're not 64-bit yet)
+- Fix bug in void-returning vsprintf() case in gzwrite.c
+- Fix name change from inflate.h in contrib/inflate86/inffas86.c
+- Check if temporary file exists before removing in make_vms.com [Zinser]
+- Fix make install and uninstall for --static option
+- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta]
+- Update readme.txt in contrib/masmx64 and masmx86 to assemble
+
+Changes in 1.2.3.9 (21 Feb 2010)
+- Expunge gzio.c
+- Move as400 build information to old
+- Fix updates in contrib/minizip and contrib/vstudio
+- Add const to vsnprintf test in configure to avoid warnings [Weigelt]
+- Delete zconf.h (made by configure) [Weigelt]
+- Change zconf.in.h to zconf.h.in per convention [Weigelt]
+- Check for NULL buf in gzgets()
+- Return empty string for gzgets() with len == 1 (like fgets())
+- Fix description of gzgets() in zlib.h for end-of-file, NULL return
+- Update minizip to 1.1 [Vollant]
+- Avoid MSVC loss of data warnings in gzread.c, gzwrite.c
+- Note in zlib.h that gzerror() should be used to distinguish from EOF
+- Remove use of snprintf() from gzlib.c
+- Fix bug in gzseek()
+- Update contrib/vstudio, adding vc9 and vc10 [Kuno, Vollant]
+- Fix zconf.h generation in CMakeLists.txt [Lowman]
+- Improve comments in zconf.h where modified by configure
+
+Changes in 1.2.3.8 (13 Feb 2010)
+- Clean up text files (tabs, trailing whitespace, etc.) [Oberhumer]
+- Use z_off64_t in gz_zero() and gz_skip() to match state->skip
+- Avoid comparison problem when sizeof(int) == sizeof(z_off64_t)
+- Revert to Makefile.in from 1.2.3.6 (live with the clutter)
+- Fix missing error return in gzflush(), add zlib.h note
+- Add *64 functions to zlib.map [Levin]
+- Fix signed/unsigned comparison in gz_comp()
+- Use SFLAGS when testing shared linking in configure
+- Add --64 option to ./configure to use -m64 with gcc
+- Fix ./configure --help to correctly name options
+- Have make fail if a test fails [Levin]
+- Avoid buffer overrun in contrib/masmx64/gvmat64.asm [Simpson]
+- Remove assembler object files from contrib
+
+Changes in 1.2.3.7 (24 Jan 2010)
+- Always gzopen() with O_LARGEFILE if available
+- Fix gzdirect() to work immediately after gzopen() or gzdopen()
+- Make gzdirect() more precise when the state changes while reading
+- Improve zlib.h documentation in many places
+- Catch memory allocation failure in gz_open()
+- Complete close operation if seek forward in gzclose_w() fails
+- Return Z_ERRNO from gzclose_r() if close() fails
+- Return Z_STREAM_ERROR instead of EOF for gzclose() being passed NULL
+- Return zero for gzwrite() errors to match zlib.h description
+- Return -1 on gzputs() error to match zlib.h description
+- Add zconf.in.h to allow recovery from configure modification [Weigelt]
+- Fix static library permissions in Makefile.in [Weigelt]
+- Avoid warnings in configure tests that hide functionality [Weigelt]
+- Add *BSD and DragonFly to Linux case in configure [gentoo 123571]
+- Change libzdll.a to libz.dll.a in win32/Makefile.gcc [gentoo 288212]
+- Avoid access of uninitialized data for first inflateReset2 call [Gomes]
+- Keep object files in subdirectories to reduce the clutter somewhat
+- Remove default Makefile and zlibdefs.h, add dummy Makefile
+- Add new external functions to Z_PREFIX, remove duplicates, z_z_ -> z_
+- Remove zlibdefs.h completely -- modify zconf.h instead
+
+Changes in 1.2.3.6 (17 Jan 2010)
+- Avoid void * arithmetic in gzread.c and gzwrite.c
+- Make compilers happier with const char * for gz_error message
+- Avoid unused parameter warning in inflate.c
+- Avoid signed-unsigned comparison warning in inflate.c
+- Indent #pragma's for traditional C
+- Fix usage of strwinerror() in glib.c, change to gz_strwinerror()
+- Correct email address in configure for system options
+- Update make_vms.com and add make_vms.com to contrib/minizip [Zinser]
+- Update zlib.map [Brown]
+- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok]
+- Apply various fixes to CMakeLists.txt [Lowman]
+- Add checks on len in gzread() and gzwrite()
+- Add error message for no more room for gzungetc()
+- Remove zlib version check in gzwrite()
+- Defer compression of gzprintf() result until need to
+- Use snprintf() in gzdopen() if available
+- Remove USE_MMAP configuration determination (only used by minigzip)
+- Remove examples/pigz.c (available separately)
+- Update examples/gun.c to 1.6
+
+Changes in 1.2.3.5 (8 Jan 2010)
+- Add space after #if in zutil.h for some compilers
+- Fix relatively harmless bug in deflate_fast() [Exarevsky]
+- Fix same problem in deflate_slow()
+- Add $(SHAREDLIBV) to LIBS in Makefile.in [Brown]
+- Add deflate_rle() for faster Z_RLE strategy run-length encoding
+- Add deflate_huff() for faster Z_HUFFMAN_ONLY encoding
+- Change name of "write" variable in inffast.c to avoid library collisions
+- Fix premature EOF from gzread() in gzio.c [Brown]
+- Use zlib header window size if windowBits is 0 in inflateInit2()
+- Remove compressBound() call in deflate.c to avoid linking compress.o
+- Replace use of errno in gz* with functions, support WinCE [Alves]
+- Provide alternative to perror() in minigzip.c for WinCE [Alves]
+- Don't use _vsnprintf on later versions of MSVC [Lowman]
+- Add CMake build script and input file [Lowman]
+- Update contrib/minizip to 1.1 [Svensson, Vollant]
+- Moved nintendods directory from contrib to .
+- Replace gzio.c with a new set of routines with the same functionality
+- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above
+- Update contrib/minizip to 1.1b
+- Change gzeof() to return 0 on error instead of -1 to agree with zlib.h
+
+Changes in 1.2.3.4 (21 Dec 2009)
+- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility
+- Update comments in configure and Makefile.in for default --shared
+- Fix test -z's in configure [Marquess]
+- Build examplesh and minigzipsh when not testing
+- Change NULL's to Z_NULL's in deflate.c and in comments in zlib.h
+- Import LDFLAGS from the environment in configure
+- Fix configure to populate SFLAGS with discovered CFLAGS options
+- Adapt make_vms.com to the new Makefile.in [Zinser]
+- Add zlib2ansi script for C++ compilation [Marquess]
+- Add _FILE_OFFSET_BITS=64 test to make test (when applicable)
+- Add AMD64 assembler code for longest match to contrib [Teterin]
+- Include options from $SFLAGS when doing $LDSHARED
+- Simplify 64-bit file support by introducing z_off64_t type
+- Make shared object files in objs directory to work around old Sun cc
+- Use only three-part version number for Darwin shared compiles
+- Add rc option to ar in Makefile.in for when ./configure not run
+- Add -WI,-rpath,. to LDFLAGS for OSF 1 V4*
+- Set LD_LIBRARYN32_PATH for SGI IRIX shared compile
+- Protect against _FILE_OFFSET_BITS being defined when compiling zlib
+- Rename Makefile.in targets allstatic to static and allshared to shared
+- Fix static and shared Makefile.in targets to be independent
+- Correct error return bug in gz_open() by setting state [Brown]
+- Put spaces before ;;'s in configure for better sh compatibility
+- Add pigz.c (parallel implementation of gzip) to examples/
+- Correct constant in crc32.c to UL [Leventhal]
+- Reject negative lengths in crc32_combine()
+- Add inflateReset2() function to work like inflateEnd()/inflateInit2()
+- Include sys/types.h for _LARGEFILE64_SOURCE [Brown]
+- Correct typo in doc/algorithm.txt [Janik]
+- Fix bug in adler32_combine() [Zhu]
+- Catch missing-end-of-block-code error in all inflates and in puff
+    Assures that random input to inflate eventually results in an error
+- Added enough.c (calculation of ENOUGH for inftrees.h) to examples/
+- Update ENOUGH and its usage to reflect discovered bounds
+- Fix gzerror() error report on empty input file [Brown]
+- Add ush casts in trees.c to avoid pedantic runtime errors
+- Fix typo in zlib.h uncompress() description [Reiss]
+- Correct inflate() comments with regard to automatic header detection
+- Remove deprecation comment on Z_PARTIAL_FLUSH (it stays)
+- Put new version of gzlog (2.0) in examples with interruption recovery
+- Add puff compile option to permit invalid distance-too-far streams
+- Add puff TEST command options, ability to read piped input
+- Prototype the *64 functions in zlib.h when _FILE_OFFSET_BITS == 64, but
+  _LARGEFILE64_SOURCE not defined
+- Fix Z_FULL_FLUSH to truly erase the past by resetting s->strstart
+- Fix deflateSetDictionary() to use all 32K for output consistency
+- Remove extraneous #define MIN_LOOKAHEAD in deflate.c (in deflate.h)
+- Clear bytes after deflate lookahead to avoid use of uninitialized data
+- Change a limit in inftrees.c to be more transparent to Coverity Prevent
+- Update win32/zlib.def with exported symbols from zlib.h
+- Correct spelling errors in zlib.h [Willem, Sobrado]
+- Allow Z_BLOCK for deflate() to force a new block
+- Allow negative bits in inflatePrime() to delete existing bit buffer
+- Add Z_TREES flush option to inflate() to return at end of trees
+- Add inflateMark() to return current state information for random access
+- Add Makefile for NintendoDS to contrib [Costa]
+- Add -w in configure compile tests to avoid spurious warnings [Beucler]
+- Fix typos in zlib.h comments for deflateSetDictionary()
+- Fix EOF detection in transparent gzread() [Maier]
+
+Changes in 1.2.3.3 (2 October 2006)
+- Make --shared the default for configure, add a --static option
+- Add compile option to permit invalid distance-too-far streams
+- Add inflateUndermine() function which is required to enable above
+- Remove use of "this" variable name for C++ compatibility [Marquess]
+- Add testing of shared library in make test, if shared library built
+- Use ftello() and fseeko() if available instead of ftell() and fseek()
+- Provide two versions of all functions that use the z_off_t type for
+  binary compatibility -- a normal version and a 64-bit offset version,
+  per the Large File Support Extension when _LARGEFILE64_SOURCE is
+  defined; use the 64-bit versions by default when _FILE_OFFSET_BITS
+  is defined to be 64
+- Add a --uname= option to configure to perhaps help with cross-compiling
+
+Changes in 1.2.3.2 (3 September 2006)
+- Turn off silly Borland warnings [Hay]
+- Use off64_t and define _LARGEFILE64_SOURCE when present
+- Fix missing dependency on inffixed.h in Makefile.in
+- Rig configure --shared to build both shared and static [Teredesai, Truta]
+- Remove zconf.in.h and instead create a new zlibdefs.h file
+- Fix contrib/minizip/unzip.c non-encrypted after encrypted [Vollant]
+- Add treebuild.xml (see http://treebuild.metux.de/) [Weigelt]
+
+Changes in 1.2.3.1 (16 August 2006)
+- Add watcom directory with OpenWatcom make files [Daniel]
+- Remove #undef of FAR in zconf.in.h for MVS [Fedtke]
+- Update make_vms.com [Zinser]
+- Use -fPIC for shared build in configure [Teredesai, Nicholson]
+- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen]
+- Use fdopen() (not _fdopen()) for Interix in zutil.h [BŠck]
+- Add some FAQ entries about the contrib directory
+- Update the MVS question in the FAQ
+- Avoid extraneous reads after EOF in gzio.c [Brown]
+- Correct spelling of "successfully" in gzio.c [Randers-Pehrson]
+- Add comments to zlib.h about gzerror() usage [Brown]
+- Set extra flags in gzip header in gzopen() like deflate() does
+- Make configure options more compatible with double-dash conventions
+  [Weigelt]
+- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen]
+- Fix uninstall target in Makefile.in [Truta]
+- Add pkgconfig support [Weigelt]
+- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt]
+- Replace set_data_type() with a more accurate detect_data_type() in
+  trees.c, according to the txtvsbin.txt document [Truta]
+- Swap the order of #include <stdio.h> and #include "zlib.h" in
+  gzio.c, example.c and minigzip.c [Truta]
+- Shut up annoying VS2005 warnings about standard C deprecation [Rowe,
+  Truta] (where?)
+- Fix target "clean" from win32/Makefile.bor [Truta]
+- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe]
+- Update zlib www home address in win32/DLL_FAQ.txt [Truta]
+- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove]
+- Enable browse info in the "Debug" and "ASM Debug" configurations in
+  the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta]
+- Add pkgconfig support [Weigelt]
+- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h,
+  for use in win32/zlib1.rc [Polushin, Rowe, Truta]
+- Add a document that explains the new text detection scheme to
+  doc/txtvsbin.txt [Truta]
+- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta]
+- Move algorithm.txt into doc/ [Truta]
+- Synchronize FAQ with website
+- Fix compressBound(), was low for some pathological cases [Fearnley]
+- Take into account wrapper variations in deflateBound()
+- Set examples/zpipe.c input and output to binary mode for Windows
+- Update examples/zlib_how.html with new zpipe.c (also web site)
+- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems
+  that gcc became pickier in 4.0)
+- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain
+  un-versioned, the patch adds versioning only for symbols introduced in
+  zlib-1.2.0 or later.  It also declares as local those symbols which are
+  not designed to be exported." [Levin]
+- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure
+- Do not initialize global static by default in trees.c, add a response
+  NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess]
+- Don't use strerror() in gzio.c under WinCE [Yakimov]
+- Don't use errno.h in zutil.h under WinCE [Yakimov]
+- Move arguments for AR to its usage to allow replacing ar [Marot]
+- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson]
+- Improve inflateInit() and inflateInit2() documentation
+- Fix structure size comment in inflate.h
+- Change configure help option from --h* to --help [Santos]
+
+Changes in 1.2.3 (18 July 2005)
+- Apply security vulnerability fixes to contrib/infback9 as well
+- Clean up some text files (carriage returns, trailing space)
+- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
+
+Changes in 1.2.2.4 (11 July 2005)
+- Add inflatePrime() function for starting inflation at bit boundary
+- Avoid some Visual C warnings in deflate.c
+- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
+  compile
+- Fix some spelling errors in comments [Betts]
+- Correct inflateInit2() error return documentation in zlib.h
+- Add zran.c example of compressed data random access to examples
+  directory, shows use of inflatePrime()
+- Fix cast for assignments to strm->state in inflate.c and infback.c
+- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
+- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
+- Add cast in trees.c t avoid a warning [Oberhumer]
+- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
+- Update make_vms.com [Zinser]
+- Initialize state->write in inflateReset() since copied in inflate_fast()
+- Be more strict on incomplete code sets in inflate_table() and increase
+  ENOUGH and MAXD -- this repairs a possible security vulnerability for
+  invalid inflate input.  Thanks to Tavis Ormandy and Markus Oberhumer for
+  discovering the vulnerability and providing test cases.
+- Add ia64 support to configure for HP-UX [Smith]
+- Add error return to gzread() for format or i/o error [Levin]
+- Use malloc.h for OS/2 [Necasek]
+
+Changes in 1.2.2.3 (27 May 2005)
+- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
+- Typecast fread() return values in gzio.c [Vollant]
+- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
+- Fix crc check bug in gzread() after gzungetc() [Heiner]
+- Add the deflateTune() function to adjust internal compression parameters
+- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
+- Remove an incorrect assertion in examples/zpipe.c
+- Add C++ wrapper in infback9.h [Donais]
+- Fix bug in inflateCopy() when decoding fixed codes
+- Note in zlib.h how much deflateSetDictionary() actually uses
+- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
+- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
+- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
+- Add gzdirect() function to indicate transparent reads
+- Update contrib/minizip [Vollant]
+- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
+- Add casts in crc32.c to avoid warnings [Oberhumer]
+- Add contrib/masmx64 [Vollant]
+- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
+
+Changes in 1.2.2.2 (30 December 2004)
+- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
+  avoid implicit memcpy calls (portability for no-library compilation)
+- Increase sprintf() buffer size in gzdopen() to allow for large numbers
+- Add INFLATE_STRICT to check distances against zlib header
+- Improve WinCE errno handling and comments [Chang]
+- Remove comment about no gzip header processing in FAQ
+- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
+- Add updated make_vms.com [Coghlan], update README
+- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
+  fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
+- Add FAQ entry and comments in deflate.c on uninitialized memory access
+- Add Solaris 9 make options in configure [Gilbert]
+- Allow strerror() usage in gzio.c for STDC
+- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
+- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
+- Use z_off_t for adler32_combine() and crc32_combine() lengths
+- Make adler32() much faster for small len
+- Use OS_CODE in deflate() default gzip header
+
+Changes in 1.2.2.1 (31 October 2004)
+- Allow inflateSetDictionary() call for raw inflate
+- Fix inflate header crc check bug for file names and comments
+- Add deflateSetHeader() and gz_header structure for custom gzip headers
+- Add inflateGetheader() to retrieve gzip headers
+- Add crc32_combine() and adler32_combine() functions
+- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
+- Use zstreamp consistently in zlib.h (inflate_back functions)
+- Remove GUNZIP condition from definition of inflate_mode in inflate.h
+  and in contrib/inflate86/inffast.S [Truta, Anderson]
+- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
+- Update projects/README.projects and projects/visualc6 [Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
+- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
+- Use a new algorithm for setting strm->data_type in trees.c [Truta]
+- Do not define an exit() prototype in zutil.c unless DEBUG defined
+- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
+- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
+- Fix Darwin build version identification [Peterson]
+
+Changes in 1.2.2 (3 October 2004)
+- Update zlib.h comments on gzip in-memory processing
+- Set adler to 1 in inflateReset() to support Java test suite [Walles]
+- Add contrib/dotzlib [Ravn]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update contrib/minizip [Vollant]
+- Move contrib/visual-basic.txt to old/ [Truta]
+- Fix assembler builds in projects/visualc6/ [Truta]
+
+Changes in 1.2.1.2 (9 September 2004)
+- Update INDEX file
+- Fix trees.c to update strm->data_type (no one ever noticed!)
+- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown]
+- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE)
+- Add limited multitasking protection to DYNAMIC_CRC_TABLE
+- Add NO_vsnprintf for VMS in zutil.h [Mozilla]
+- Don't declare strerror() under VMS [Mozilla]
+- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize
+- Update contrib/ada [Anisimkov]
+- Update contrib/minizip [Vollant]
+- Fix configure to not hardcode directories for Darwin [Peterson]
+- Fix gzio.c to not return error on empty files [Brown]
+- Fix indentation; update version in contrib/delphi/ZLib.pas and
+  contrib/pascal/zlibpas.pas [Truta]
+- Update mkasm.bat in contrib/masmx86 [Truta]
+- Update contrib/untgz [Truta]
+- Add projects/README.projects [Truta]
+- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta]
+- Remove an unnecessary assignment to curr in inftrees.c [Truta]
+- Add OS/2 to exe builds in configure [Poltorak]
+- Remove err dummy parameter in zlib.h [Kientzle]
+
+Changes in 1.2.1.1 (9 January 2004)
+- Update email address in README
+- Several FAQ updates
+- Fix a big fat bug in inftrees.c that prevented decoding valid
+  dynamic blocks with only literals and no distance codes --
+  Thanks to "Hot Emu" for the bug report and sample file
+- Add a note to puff.c on no distance codes case.
+
+Changes in 1.2.1 (17 November 2003)
+- Remove a tab in contrib/gzappend/gzappend.c
+- Update some interfaces in contrib for new zlib functions
+- Update zlib version number in some contrib entries
+- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta]
+- Support shared libraries on Hurd and KFreeBSD [Brown]
+- Fix error in NO_DIVIDE option of adler32.c
+
+Changes in 1.2.0.8 (4 November 2003)
+- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas
+- Add experimental NO_DIVIDE #define in adler32.c
+    - Possibly faster on some processors (let me know if it is)
+- Correct Z_BLOCK to not return on first inflate call if no wrap
+- Fix strm->data_type on inflate() return to correctly indicate EOB
+- Add deflatePrime() function for appending in the middle of a byte
+- Add contrib/gzappend for an example of appending to a stream
+- Update win32/DLL_FAQ.txt [Truta]
+- Delete Turbo C comment in README [Truta]
+- Improve some indentation in zconf.h [Truta]
+- Fix infinite loop on bad input in configure script [Church]
+- Fix gzeof() for concatenated gzip files [Johnson]
+- Add example to contrib/visual-basic.txt [Michael B.]
+- Add -p to mkdir's in Makefile.in [vda]
+- Fix configure to properly detect presence or lack of printf functions
+- Add AS400 support [Monnerat]
+- Add a little Cygwin support [Wilson]
+
+Changes in 1.2.0.7 (21 September 2003)
+- Correct some debug formats in contrib/infback9
+- Cast a type in a debug statement in trees.c
+- Change search and replace delimiter in configure from % to # [Beebe]
+- Update contrib/untgz to 0.2 with various fixes [Truta]
+- Add build support for Amiga [Nikl]
+- Remove some directories in old that have been updated to 1.2
+- Add dylib building for Mac OS X in configure and Makefile.in
+- Remove old distribution stuff from Makefile
+- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X
+- Update links in README
+
+Changes in 1.2.0.6 (13 September 2003)
+- Minor FAQ updates
+- Update contrib/minizip to 1.00 [Vollant]
+- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta]
+- Update POSTINC comment for 68060 [Nikl]
+- Add contrib/infback9 with deflate64 decoding (unsupported)
+- For MVS define NO_vsnprintf and undefine FAR [van Burik]
+- Add pragma for fdopen on MVS [van Burik]
+
+Changes in 1.2.0.5 (8 September 2003)
+- Add OF to inflateBackEnd() declaration in zlib.h
+- Remember start when using gzdopen in the middle of a file
+- Use internal off_t counters in gz* functions to properly handle seeks
+- Perform more rigorous check for distance-too-far in inffast.c
+- Add Z_BLOCK flush option to return from inflate at block boundary
+- Set strm->data_type on return from inflate
+    - Indicate bits unused, if at block boundary, and if in last block
+- Replace size_t with ptrdiff_t in crc32.c, and check for correct size
+- Add condition so old NO_DEFLATE define still works for compatibility
+- FAQ update regarding the Windows DLL [Truta]
+- INDEX update: add qnx entry, remove aix entry [Truta]
+- Install zlib.3 into mandir [Wilson]
+- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta]
+- Adapt the zlib interface to the new DLL convention guidelines [Truta]
+- Introduce ZLIB_WINAPI macro to allow the export of functions using
+  the WINAPI calling convention, for Visual Basic [Vollant, Truta]
+- Update msdos and win32 scripts and makefiles [Truta]
+- Export symbols by name, not by ordinal, in win32/zlib.def [Truta]
+- Add contrib/ada [Anisimkov]
+- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta]
+- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant]
+- Add contrib/masm686 [Truta]
+- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm
+  [Truta, Vollant]
+- Update contrib/delphi; rename to contrib/pascal; add example [Truta]
+- Remove contrib/delphi2; add a new contrib/delphi [Truta]
+- Avoid inclusion of the nonstandard <memory.h> in contrib/iostream,
+  and fix some method prototypes [Truta]
+- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip
+  [Truta]
+- Avoid the use of backslash (\) in contrib/minizip [Vollant]
+- Fix file time handling in contrib/untgz; update makefiles [Truta]
+- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines
+  [Vollant]
+- Remove contrib/vstudio/vc15_16 [Vollant]
+- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta]
+- Update README.contrib [Truta]
+- Invert the assignment order of match_head and s->prev[...] in
+  INSERT_STRING [Truta]
+- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings
+  [Truta]
+- Compare function pointers with 0, not with NULL or Z_NULL [Truta]
+- Fix prototype of syncsearch in inflate.c [Truta]
+- Introduce ASMINF macro to be enabled when using an ASM implementation
+  of inflate_fast [Truta]
+- Change NO_DEFLATE to NO_GZCOMPRESS [Truta]
+- Modify test_gzio in example.c to take a single file name as a
+  parameter [Truta]
+- Exit the example.c program if gzopen fails [Truta]
+- Add type casts around strlen in example.c [Truta]
+- Remove casting to sizeof in minigzip.c; give a proper type
+  to the variable compared with SUFFIX_LEN [Truta]
+- Update definitions of STDC and STDC99 in zconf.h [Truta]
+- Synchronize zconf.h with the new Windows DLL interface [Truta]
+- Use SYS16BIT instead of __32BIT__ to distinguish between
+  16- and 32-bit platforms [Truta]
+- Use far memory allocators in small 16-bit memory models for
+  Turbo C [Truta]
+- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in
+  zlibCompileFlags [Truta]
+- Cygwin has vsnprintf [Wilson]
+- In Windows16, OS_CODE is 0, as in MSDOS [Truta]
+- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson]
+
+Changes in 1.2.0.4 (10 August 2003)
+- Minor FAQ updates
+- Be more strict when checking inflateInit2's windowBits parameter
+- Change NO_GUNZIP compile option to NO_GZIP to cover deflate as well
+- Add gzip wrapper option to deflateInit2 using windowBits
+- Add updated QNX rule in configure and qnx directory [Bonnefoy]
+- Make inflate distance-too-far checks more rigorous
+- Clean up FAR usage in inflate
+- Add casting to sizeof() in gzio.c and minigzip.c
+
+Changes in 1.2.0.3 (19 July 2003)
+- Fix silly error in gzungetc() implementation [Vollant]
+- Update contrib/minizip and contrib/vstudio [Vollant]
+- Fix printf format in example.c
+- Correct cdecl support in zconf.in.h [Anisimkov]
+- Minor FAQ updates
+
+Changes in 1.2.0.2 (13 July 2003)
+- Add ZLIB_VERNUM in zlib.h for numerical preprocessor comparisons
+- Attempt to avoid warnings in crc32.c for pointer-int conversion
+- Add AIX to configure, remove aix directory [Bakker]
+- Add some casts to minigzip.c
+- Improve checking after insecure sprintf() or vsprintf() calls
+- Remove #elif's from crc32.c
+- Change leave label to inf_leave in inflate.c and infback.c to avoid
+  library conflicts
+- Remove inflate gzip decoding by default--only enable gzip decoding by
+  special request for stricter backward compatibility
+- Add zlibCompileFlags() function to return compilation information
+- More typecasting in deflate.c to avoid warnings
+- Remove leading underscore from _Capital #defines [Truta]
+- Fix configure to link shared library when testing
+- Add some Windows CE target adjustments [Mai]
+- Remove #define ZLIB_DLL in zconf.h [Vollant]
+- Add zlib.3 [Rodgers]
+- Update RFC URL in deflate.c and algorithm.txt [Mai]
+- Add zlib_dll_FAQ.txt to contrib [Truta]
+- Add UL to some constants [Truta]
+- Update minizip and vstudio [Vollant]
+- Remove vestigial NEED_DUMMY_RETURN from zconf.in.h
+- Expand use of NO_DUMMY_DECL to avoid all dummy structures
+- Added iostream3 to contrib [Schwardt]
+- Replace rewind() with fseek() for WinCE [Truta]
+- Improve setting of zlib format compression level flags
+    - Report 0 for huffman and rle strategies and for level == 0 or 1
+    - Report 2 only for level == 6
+- Only deal with 64K limit when necessary at compile time [Truta]
+- Allow TOO_FAR check to be turned off at compile time [Truta]
+- Add gzclearerr() function [Souza]
+- Add gzungetc() function
+
+Changes in 1.2.0.1 (17 March 2003)
+- Add Z_RLE strategy for run-length encoding [Truta]
+    - When Z_RLE requested, restrict matches to distance one
+    - Update zlib.h, minigzip.c, gzopen(), gzdopen() for Z_RLE
+- Correct FASTEST compilation to allow level == 0
+- Clean up what gets compiled for FASTEST
+- Incorporate changes to zconf.in.h [Vollant]
+    - Refine detection of Turbo C need for dummy returns
+    - Refine ZLIB_DLL compilation
+    - Include additional header file on VMS for off_t typedef
+- Try to use _vsnprintf where it supplants vsprintf [Vollant]
+- Add some casts in inffast.c
+- Enchance comments in zlib.h on what happens if gzprintf() tries to
+  write more than 4095 bytes before compression
+- Remove unused state from inflateBackEnd()
+- Remove exit(0) from minigzip.c, example.c
+- Get rid of all those darn tabs
+- Add "check" target to Makefile.in that does the same thing as "test"
+- Add "mostlyclean" and "maintainer-clean" targets to Makefile.in
+- Update contrib/inflate86 [Anderson]
+- Update contrib/testzlib, contrib/vstudio, contrib/minizip [Vollant]
+- Add msdos and win32 directories with makefiles [Truta]
+- More additions and improvements to the FAQ
+
+Changes in 1.2.0 (9 March 2003)
+- New and improved inflate code
+    - About 20% faster
+    - Does not allocate 32K window unless and until needed
+    - Automatically detects and decompresses gzip streams
+    - Raw inflate no longer needs an extra dummy byte at end
+    - Added inflateBack functions using a callback interface--even faster
+      than inflate, useful for file utilities (gzip, zip)
+    - Added inflateCopy() function to record state for random access on
+      externally generated deflate streams (e.g. in gzip files)
+    - More readable code (I hope)
+- New and improved crc32()
+    - About 50% faster, thanks to suggestions from Rodney Brown
+- Add deflateBound() and compressBound() functions
+- Fix memory leak in deflateInit2()
+- Permit setting dictionary for raw deflate (for parallel deflate)
+- Fix const declaration for gzwrite()
+- Check for some malloc() failures in gzio.c
+- Fix bug in gzopen() on single-byte file 0x1f
+- Fix bug in gzread() on concatenated file with 0x1f at end of buffer
+  and next buffer doesn't start with 0x8b
+- Fix uncompress() to return Z_DATA_ERROR on truncated input
+- Free memory at end of example.c
+- Remove MAX #define in trees.c (conflicted with some libraries)
+- Fix static const's in deflate.c, gzio.c, and zutil.[ch]
+- Declare malloc() and free() in gzio.c if STDC not defined
+- Use malloc() instead of calloc() in zutil.c if int big enough
+- Define STDC for AIX
+- Add aix/ with approach for compiling shared library on AIX
+- Add HP-UX support for shared libraries in configure
+- Add OpenUNIX support for shared libraries in configure
+- Use $cc instead of gcc to build shared library
+- Make prefix directory if needed when installing
+- Correct Macintosh avoidance of typedef Byte in zconf.h
+- Correct Turbo C memory allocation when under Linux
+- Use libz.a instead of -lz in Makefile (assure use of compiled library)
+- Update configure to check for snprintf or vsnprintf functions and their
+  return value, warn during make if using an insecure function
+- Fix configure problem with compile-time knowledge of HAVE_UNISTD_H that
+  is lost when library is used--resolution is to build new zconf.h
+- Documentation improvements (in zlib.h):
+    - Document raw deflate and inflate
+    - Update RFCs URL
+    - Point out that zlib and gzip formats are different
+    - Note that Z_BUF_ERROR is not fatal
+    - Document string limit for gzprintf() and possible buffer overflow
+    - Note requirement on avail_out when flushing
+    - Note permitted values of flush parameter of inflate()
+- Add some FAQs (and even answers) to the FAQ
+- Add contrib/inflate86/ for x86 faster inflate
+- Add contrib/blast/ for PKWare Data Compression Library decompression
+- Add contrib/puff/ simple inflate for deflate format description
+
+Changes in 1.1.4 (11 March 2002)
+- ZFREE was repeated on same allocation on some error conditions.
+  This creates a security problem described in
+  http://www.zlib.org/advisory-2002-03-11.txt
+- Returned incorrect error (Z_MEM_ERROR) on some invalid data
+- Avoid accesses before window for invalid distances with inflate window
+  less than 32K.
+- force windowBits > 8 to avoid a bug in the encoder for a window size
+  of 256 bytes. (A complete fix will be available in 1.1.5).
+
+Changes in 1.1.3 (9 July 1998)
+- fix "an inflate input buffer bug that shows up on rare but persistent
+  occasions" (Mark)
+- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
+- fix gzseek(..., SEEK_SET) in write mode
+- fix crc check after a gzeek (Frank Faubert)
+- fix miniunzip when the last entry in a zip file is itself a zip file
+  (J Lillge)
+- add contrib/asm586 and contrib/asm686 (Brian Raiter)
+  See http://www.muppetlabs.com/~breadbox/software/assembly.html
+- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
+- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
+- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
+- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
+- added a FAQ file
+
+- Support gzdopen on Mac with Metrowerks (Jason Linhart)
+- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
+- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
+- avoid some warnings with Borland C (Tom Tanner)
+- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
+- emulate utime() for WIN32 in contrib/untgz  (Gilles Vollant)
+- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
+- use libdir and includedir in Makefile.in (Tim Mooney)
+- support shared libraries on OSF1 V4 (Tim Mooney)
+- remove so_locations in "make clean"  (Tim Mooney)
+- fix maketree.c compilation error (Glenn, Mark)
+- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
+- new Makefile.riscos (Rich Walker)
+- initialize static descriptors in trees.c for embedded targets (Nick Smith)
+- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
+- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
+- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
+- fix maketree.c to allow clean compilation of inffixed.h (Mark)
+- fix parameter check in deflateCopy (Gunther Nikl)
+- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
+- Many portability patches by Christian Spieler:
+  . zutil.c, zutil.h: added "const" for zmem*
+  . Make_vms.com: fixed some typos
+  . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
+  . msdos/Makefile.msc: remove "default rtl link library" info from obj files
+  . msdos/Makefile.*: use model-dependent name for the built zlib library
+  . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
+     new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
+- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
+- replace __far with _far for better portability (Christian Spieler, Tom Lane)
+- fix test for errno.h in configure (Tim Newsham)
+
+Changes in 1.1.2 (19 March 98)
+- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
+  See http://www.winimage.com/zLibDll/unzip.html
+- preinitialize the inflate tables for fixed codes, to make the code
+  completely thread safe (Mark)
+- some simplifications and slight speed-up to the inflate code (Mark)
+- fix gzeof on non-compressed files (Allan Schrum)
+- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
+- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
+- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
+- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
+- do not wrap extern "C" around system includes (Tom Lane)
+- mention zlib binding for TCL in README (Andreas Kupries)
+- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
+- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
+- allow "configure --prefix $HOME" (Tim Mooney)
+- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
+- move Makefile.sas to amiga/Makefile.sas
+
+Changes in 1.1.1 (27 Feb 98)
+- fix macros _tr_tally_* in deflate.h for debug mode  (Glenn Randers-Pehrson)
+- remove block truncation heuristic which had very marginal effect for zlib
+  (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
+  compression ratio on some files. This also allows inlining _tr_tally for
+  matches in deflate_slow.
+- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
+
+Changes in 1.1.0 (24 Feb 98)
+- do not return STREAM_END prematurely in inflate (John Bowler)
+- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
+- compile with -DFASTEST to get compression code optimized for speed only
+- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
+- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
+  on Sun but significant on HP)
+
+- add a pointer to experimental unzip library in README (Gilles Vollant)
+- initialize variable gcc in configure (Chris Herborth)
+
+Changes in 1.0.9 (17 Feb 1998)
+- added gzputs and gzgets functions
+- do not clear eof flag in gzseek (Mark Diekhans)
+- fix gzseek for files in transparent mode (Mark Diekhans)
+- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
+- replace EXPORT with ZEXPORT to avoid conflict with other programs
+- added compress2 in zconf.h, zlib.def, zlib.dnt
+- new asm code from Gilles Vollant in contrib/asm386
+- simplify the inflate code (Mark):
+ . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
+ . ZALLOC the length list in inflate_trees_fixed() instead of using stack
+ . ZALLOC the value area for huft_build() instead of using stack
+ . Simplify Z_FINISH check in inflate()
+
+- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
+- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
+- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
+  the declaration of FAR (Gilles VOllant)
+- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
+- read_buf buf parameter of type Bytef* instead of charf*
+- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
+- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
+- fix check for presence of directories in "make install" (Ian Willis)
+
+Changes in 1.0.8 (27 Jan 1998)
+- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
+- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
+- added compress2() to allow setting the compression level
+- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
+- use constant arrays for the static trees in trees.c instead of computing
+  them at run time (thanks to Ken Raeburn for this suggestion). To create
+  trees.h, compile with GEN_TREES_H and run "make test".
+- check return code of example in "make test" and display result
+- pass minigzip command line options to file_compress
+- simplifying code of inflateSync to avoid gcc 2.8 bug
+
+- support CC="gcc -Wall" in configure -s (QingLong)
+- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
+- fix test for shared library support to avoid compiler warnings
+- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
+- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
+- do not use fdopen for Metrowerks on Mac (Brad Pettit))
+- add checks for gzputc and gzputc in example.c
+- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
+- use const for the CRC table (Ken Raeburn)
+- fixed "make uninstall" for shared libraries
+- use Tracev instead of Trace in infblock.c
+- in example.c use correct compressed length for test_sync
+- suppress +vnocompatwarnings in configure for HPUX (not always supported)
+
+Changes in 1.0.7 (20 Jan 1998)
+- fix gzseek which was broken in write mode
+- return error for gzseek to negative absolute position
+- fix configure for Linux (Chun-Chung Chen)
+- increase stack space for MSC (Tim Wegner)
+- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
+- define EXPORTVA for gzprintf (Gilles Vollant)
+- added man page zlib.3 (Rick Rodgers)
+- for contrib/untgz, fix makedir() and improve Makefile
+
+- check gzseek in write mode in example.c
+- allocate extra buffer for seeks only if gzseek is actually called
+- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
+- add inflateSyncPoint in zconf.h
+- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
+
+Changes in 1.0.6 (19 Jan 1998)
+- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
+  gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
+- Fix a deflate bug occurring only with compression level 0 (thanks to
+  Andy Buckler for finding this one).
+- In minigzip, pass transparently also the first byte for .Z files.
+- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
+- check Z_FINISH in inflate (thanks to Marc Schluper)
+- Implement deflateCopy (thanks to Adam Costello)
+- make static libraries by default in configure, add --shared option.
+- move MSDOS or Windows specific files to directory msdos
+- suppress the notion of partial flush to simplify the interface
+  (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
+- suppress history buffer provided by application to simplify the interface
+  (this feature was not implemented anyway in 1.0.4)
+- next_in and avail_in must be initialized before calling inflateInit or
+  inflateInit2
+- add EXPORT in all exported functions (for Windows DLL)
+- added Makefile.nt (thanks to Stephen Williams)
+- added the unsupported "contrib" directory:
+   contrib/asm386/ by Gilles Vollant <info@winimage.com>
+        386 asm code replacing longest_match().
+   contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+   contrib/iostream2/  by Tyge Løvset <Tyge.Lovset@cmr.no>
+        Another C++ I/O streams interface
+   contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+        A very simple tar.gz file extractor using zlib
+   contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.
+- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
+  level) in minigzip (thanks to Tom Lane)
+
+- use const for rommable constants in deflate
+- added test for gzseek and gztell in example.c
+- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
+- add undocumented function zError to convert error code to string
+  (for Tim Smithers)
+- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
+- Use default memcpy for Symantec MSDOS compiler.
+- Add EXPORT keyword for check_func (needed for Windows DLL)
+- add current directory to LD_LIBRARY_PATH for "make test"
+- create also a link for libz.so.1
+- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
+- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
+- added -soname for Linux in configure (Chun-Chung Chen,
+- assign numbers to the exported functions in zlib.def (for Windows DLL)
+- add advice in zlib.h for best usage of deflateSetDictionary
+- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
+- allow compilation with ANSI keywords only enabled for TurboC in large model
+- avoid "versionString"[0] (Borland bug)
+- add NEED_DUMMY_RETURN for Borland
+- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
+- allow compilation with CC
+- defined STDC for OS/2 (David Charlap)
+- limit external names to 8 chars for MVS (Thomas Lund)
+- in minigzip.c, use static buffers only for 16-bit systems
+- fix suffix check for "minigzip -d foo.gz"
+- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
+- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
+- added makelcc.bat for lcc-win32 (Tom St Denis)
+- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
+- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
+- check for unistd.h in configure (for off_t)
+- remove useless check parameter in inflate_blocks_free
+- avoid useless assignment of s->check to itself in inflate_blocks_new
+- do not flush twice in gzclose (thanks to Ken Raeburn)
+- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
+- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
+- work around buggy fclose on pipes for HP/UX
+- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
+- fix configure if CC is already equal to gcc
+
+Changes in 1.0.5 (3 Jan 98)
+- Fix inflate to terminate gracefully when fed corrupted or invalid data
+- Use const for rommable constants in inflate
+- Eliminate memory leaks on error conditions in inflate
+- Removed some vestigial code in inflate
+- Update web address in README
+
+Changes in 1.0.4 (24 Jul 96)
+- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
+  bit, so the decompressor could decompress all the correct data but went
+  on to attempt decompressing extra garbage data. This affected minigzip too.
+- zlibVersion and gzerror return const char* (needed for DLL)
+- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
+- use z_error only for DEBUG (avoid problem with DLLs)
+
+Changes in 1.0.3 (2 Jul 96)
+- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
+  small and medium models; this makes the library incompatible with previous
+  versions for these models. (No effect in large model or on other systems.)
+- return OK instead of BUF_ERROR if previous deflate call returned with
+  avail_out as zero but there is nothing to do
+- added memcmp for non STDC compilers
+- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
+- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
+- better check for 16-bit mode MSC (avoids problem with Symantec)
+
+Changes in 1.0.2 (23 May 96)
+- added Windows DLL support
+- added a function zlibVersion (for the DLL support)
+- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
+- Bytef is define's instead of typedef'd only for Borland C
+- avoid reading uninitialized memory in example.c
+- mention in README that the zlib format is now RFC1950
+- updated Makefile.dj2
+- added algorithm.doc
+
+Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
+- fix array overlay in deflate.c which sometimes caused bad compressed data
+- fix inflate bug with empty stored block
+- fix MSDOS medium model which was broken in 0.99
+- fix deflateParams() which could generated bad compressed data.
+- Bytef is define'd instead of typedef'ed (work around Borland bug)
+- added an INDEX file
+- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
+  Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
+- speed up adler32 for modern machines without auto-increment
+- added -ansi for IRIX in configure
+- static_init_done in trees.c is an int
+- define unlink as delete for VMS
+- fix configure for QNX
+- add configure branch for SCO and HPUX
+- avoid many warnings (unused variables, dead assignments, etc...)
+- no fdopen for BeOS
+- fix the Watcom fix for 32 bit mode (define FAR as empty)
+- removed redefinition of Byte for MKWERKS
+- work around an MWKERKS bug (incorrect merge of all .h files)
+
+Changes in 0.99 (27 Jan 96)
+- allow preset dictionary shared between compressor and decompressor
+- allow compression level 0 (no compression)
+- add deflateParams in zlib.h: allow dynamic change of compression level
+  and compression strategy.
+- test large buffers and deflateParams in example.c
+- add optional "configure" to build zlib as a shared library
+- suppress Makefile.qnx, use configure instead
+- fixed deflate for 64-bit systems (detected on Cray)
+- fixed inflate_blocks for 64-bit systems (detected on Alpha)
+- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
+- always return Z_BUF_ERROR when deflate() has nothing to do
+- deflateInit and inflateInit are now macros to allow version checking
+- prefix all global functions and types with z_ with -DZ_PREFIX
+- make falloc completely reentrant (inftrees.c)
+- fixed very unlikely race condition in ct_static_init
+- free in reverse order of allocation to help memory manager
+- use zlib-1.0/* instead of zlib/* inside the tar.gz
+- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
+  -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
+- allow gzread on concatenated .gz files
+- deflateEnd now returns Z_DATA_ERROR if it was premature
+- deflate is finally (?) fully deterministic (no matches beyond end of input)
+- Document Z_SYNC_FLUSH
+- add uninstall in Makefile
+- Check for __cpluplus in zlib.h
+- Better test in ct_align for partial flush
+- avoid harmless warnings for Borland C++
+- initialize hash_head in deflate.c
+- avoid warning on fdopen (gzio.c) for HP cc -Aa
+- include stdlib.h for STDC compilers
+- include errno.h for Cray
+- ignore error if ranlib doesn't exist
+- call ranlib twice for NeXTSTEP
+- use exec_prefix instead of prefix for libz.a
+- renamed ct_* as _tr_* to avoid conflict with applications
+- clear z->msg in inflateInit2 before any error return
+- initialize opaque in example.c, gzio.c, deflate.c and inflate.c
+- fixed typo in zconf.h (_GNUC__ => __GNUC__)
+- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
+- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
+- in fcalloc, normalize pointer if size > 65520 bytes
+- don't use special fcalloc for 32 bit Borland C++
+- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
+- use Z_BINARY instead of BINARY
+- document that gzclose after gzdopen will close the file
+- allow "a" as mode in gzopen.
+- fix error checking in gzread
+- allow skipping .gz extra-field on pipes
+- added reference to Perl interface in README
+- put the crc table in FAR data (I dislike more and more the medium model :)
+- added get_crc_table
+- added a dimension to all arrays (Borland C can't count).
+- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
+- guard against multiple inclusion of *.h (for precompiled header on Mac)
+- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
+- don't use unsized arrays to avoid silly warnings by Visual C++:
+     warning C4746: 'inflate_mask' : unsized array treated as  '__far'
+     (what's wrong with far data in far model?).
+- define enum out of inflate_blocks_state to allow compilation with C++
+
+Changes in 0.95 (16 Aug 95)
+- fix MSDOS small and medium model (now easier to adapt to any compiler)
+- inlined send_bits
+- fix the final (:-) bug for deflate with flush (output was correct but
+  not completely flushed in rare occasions).
+- default window size is same for compression and decompression
+  (it's now sufficient to set MAX_WBITS in zconf.h).
+- voidp -> voidpf and voidnp -> voidp (for consistency with other
+  typedefs and because voidnp was not near in large model).
+
+Changes in 0.94 (13 Aug 95)
+- support MSDOS medium model
+- fix deflate with flush (could sometimes generate bad output)
+- fix deflateReset (zlib header was incorrectly suppressed)
+- added support for VMS
+- allow a compression level in gzopen()
+- gzflush now calls fflush
+- For deflate with flush, flush even if no more input is provided.
+- rename libgz.a as libz.a
+- avoid complex expression in infcodes.c triggering Turbo C bug
+- work around a problem with gcc on Alpha (in INSERT_STRING)
+- don't use inline functions (problem with some gcc versions)
+- allow renaming of Byte, uInt, etc... with #define.
+- avoid warning about (unused) pointer before start of array in deflate.c
+- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
+- avoid reserved word 'new' in trees.c
+
+Changes in 0.93 (25 June 95)
+- temporarily disable inline functions
+- make deflate deterministic
+- give enough lookahead for PARTIAL_FLUSH
+- Set binary mode for stdin/stdout in minigzip.c for OS/2
+- don't even use signed char in inflate (not portable enough)
+- fix inflate memory leak for segmented architectures
+
+Changes in 0.92 (3 May 95)
+- don't assume that char is signed (problem on SGI)
+- Clear bit buffer when starting a stored block
+- no memcpy on Pyramid
+- suppressed inftest.c
+- optimized fill_window, put longest_match inline for gcc
+- optimized inflate on stored blocks.
+- untabify all sources to simplify patches
+
+Changes in 0.91 (2 May 95)
+- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
+- Document the memory requirements in zconf.h
+- added "make install"
+- fix sync search logic in inflateSync
+- deflate(Z_FULL_FLUSH) now works even if output buffer too short
+- after inflateSync, don't scare people with just "lo world"
+- added support for DJGPP
+
+Changes in 0.9 (1 May 95)
+- don't assume that zalloc clears the allocated memory (the TurboC bug
+  was Mark's bug after all :)
+- let again gzread copy uncompressed data unchanged (was working in 0.71)
+- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
+- added a test of inflateSync in example.c
+- moved MAX_WBITS to zconf.h because users might want to change that.
+- document explicitly that zalloc(64K) on MSDOS must return a normalized
+  pointer (zero offset)
+- added Makefiles for Microsoft C, Turbo C, Borland C++
+- faster crc32()
+
+Changes in 0.8 (29 April 95)
+- added fast inflate (inffast.c)
+- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
+  is incompatible with previous versions of zlib which returned Z_OK.
+- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
+  (actually that was not a compiler bug, see 0.81 above)
+- gzread no longer reads one extra byte in certain cases
+- In gzio destroy(), don't reference a freed structure
+- avoid many warnings for MSDOS
+- avoid the ERROR symbol which is used by MS Windows
+
+Changes in 0.71 (14 April 95)
+- Fixed more MSDOS compilation problems :( There is still a bug with
+  TurboC large model.
+
+Changes in 0.7 (14 April 95)
+- Added full inflate support.
+- Simplified the crc32() interface. The pre- and post-conditioning
+  (one's complement) is now done inside crc32(). WARNING: this is
+  incompatible with previous versions; see zlib.h for the new usage.
+
+Changes in 0.61 (12 April 95)
+- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
+
+Changes in 0.6 (11 April 95)
+- added minigzip.c
+- added gzdopen to reopen a file descriptor as gzFile
+- added transparent reading of non-gziped files in gzread.
+- fixed bug in gzread (don't read crc as data)
+- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
+- don't allocate big arrays in the stack (for MSDOS)
+- fix some MSDOS compilation problems
+
+Changes in 0.5:
+- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
+  not yet Z_FULL_FLUSH.
+- support decompression but only in a single step (forced Z_FINISH)
+- added opaque object for zalloc and zfree.
+- added deflateReset and inflateReset
+- added a variable zlib_version for consistency checking.
+- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
+  Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
+
+Changes in 0.4:
+- avoid "zip" everywhere, use zlib instead of ziplib.
+- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
+  if compression method == 8.
+- added adler32 and crc32
+- renamed deflateOptions as deflateInit2, call one or the other but not both
+- added the method parameter for deflateInit2.
+- added inflateInit2
+- simplied considerably deflateInit and inflateInit by not supporting
+  user-provided history buffer. This is supported only in deflateInit2
+  and inflateInit2.
+
+Changes in 0.3:
+- prefix all macro names with Z_
+- use Z_FINISH instead of deflateEnd to finish compression.
+- added Z_HUFFMAN_ONLY
+- added gzerror()
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/README	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,115 @@
+ZLIB DATA COMPRESSION LIBRARY
+
+zlib 1.2.8 is a general purpose data compression library.  All the code is
+thread safe.  The data format used by the zlib library is described by RFCs
+(Request for Comments) 1950 to 1952 in the files
+http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
+rfc1952 (gzip format).
+
+All functions of the compression library are documented in the file zlib.h
+(volunteer to write man pages welcome, contact zlib@gzip.org).  A usage example
+of the library is given in the file test/example.c which also tests that
+the library is working correctly.  Another example is given in the file
+test/minigzip.c.  The compression library itself is composed of all source
+files in the root directory.
+
+To compile all files and run the test program, follow the instructions given at
+the top of Makefile.in.  In short "./configure; make test", and if that goes
+well, "make install" should work for most flavors of Unix.  For Windows, use
+one of the special makefiles in win32/ or contrib/vstudio/ .  For VMS, use
+make_vms.com.
+
+Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
+<info@winimage.com> for the Windows DLL version.  The zlib home page is
+http://zlib.net/ .  Before reporting a problem, please check this site to
+verify that you have the latest version of zlib; otherwise get the latest
+version and check whether the problem still exists or not.
+
+PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.
+
+Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
+issue of Dr.  Dobb's Journal; a copy of the article is available at
+http://marknelson.us/1997/01/01/zlib-engine/ .
+
+The changes made in version 1.2.8 are documented in the file ChangeLog.
+
+Unsupported third party contributions are provided in directory contrib/ .
+
+zlib is available in Java using the java.util.zip package, documented at
+http://java.sun.com/developer/technicalArticles/Programming/compression/ .
+
+A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available
+at CPAN (Comprehensive Perl Archive Network) sites, including
+http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
+
+A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
+available in Python 1.5 and later versions, see
+http://docs.python.org/library/zlib.html .
+
+zlib is built into tcl: http://wiki.tcl.tk/4610 .
+
+An experimental package to read and write files in .zip format, written on top
+of zlib by Gilles Vollant <info@winimage.com>, is available in the
+contrib/minizip directory of zlib.
+
+
+Notes for some targets:
+
+- For Windows DLL versions, please see win32/DLL_FAQ.txt
+
+- For 64-bit Irix, deflate.c must be compiled without any optimization. With
+  -O, one libpng test fails. The test works in 32 bit mode (with the -n32
+  compiler flag). The compiler bug has been reported to SGI.
+
+- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works
+  when compiled with cc.
+
+- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is
+  necessary to get gzprintf working correctly. This is done by configure.
+
+- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
+  other compilers. Use "make test" to check your compiler.
+
+- gzdopen is not supported on RISCOS or BEOS.
+
+- For PalmOs, see http://palmzlib.sourceforge.net/
+
+
+Acknowledgments:
+
+  The deflate format used by zlib was defined by Phil Katz.  The deflate and
+  zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
+  people who reported problems and suggested various improvements in zlib; they
+  are too numerous to cite here.
+
+Copyright notice:
+
+ (C) 1995-2013 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+If you use the zlib library in a product, we would appreciate *not* receiving
+lengthy legal documents to sign.  The sources are provided for free but without
+warranty of any kind.  The library has been entirely written by Jean-loup
+Gailly and Mark Adler; it does not include third-party code.
+
+If you redistribute modified sources, we would appreciate that you include in
+the file ChangeLog history information documenting your changes.  Please read
+the FAQ for more information on the distribution of modified source versions.
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/compress.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,104 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* compress.c -- compress a memory buffer
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+/* ===========================================================================
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+    int level;
+{
+    z_stream stream;
+    int err;
+
+    stream.next_in = (z_const Bytef *)source;
+    stream.avail_in = (uInt)sourceLen;
+#ifdef MAXSEG_64K
+    /* Check for source > 64K on 16-bit machine: */
+    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+#endif
+    stream.next_out = dest;
+    stream.avail_out = (uInt)*destLen;
+    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+    stream.zalloc = (alloc_func)0;
+    stream.zfree = (free_func)0;
+    stream.opaque = (voidpf)0;
+
+    err = deflateInit(&stream, level);
+    if (err != Z_OK) return err;
+
+    err = deflate(&stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        deflateEnd(&stream);
+        return err == Z_OK ? Z_BUF_ERROR : err;
+    }
+    *destLen = stream.total_out;
+
+    err = deflateEnd(&stream);
+    return err;
+}
+
+/* ===========================================================================
+ */
+int ZEXPORT compress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}
+
+/* ===========================================================================
+     If the default memLevel or windowBits for deflateInit() is changed, then
+   this function needs to be updated.
+ */
+uLong ZEXPORT compressBound (sourceLen)
+    uLong sourceLen;
+{
+    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+           (sourceLen >> 25) + 13;
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/crc32.h	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,465 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* crc32.h -- tables for rapid CRC calculation
+ * Generated automatically by crc32.c
+ */
+
+local const z_crc_t FAR crc_table[TBLS][256] =
+{
+  {
+    0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
+    0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
+    0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
+    0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
+    0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
+    0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
+    0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
+    0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
+    0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
+    0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
+    0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
+    0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
+    0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
+    0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
+    0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
+    0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
+    0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
+    0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
+    0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
+    0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
+    0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
+    0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
+    0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
+    0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
+    0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
+    0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
+    0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
+    0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
+    0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
+    0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
+    0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
+    0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
+    0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
+    0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
+    0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
+    0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
+    0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
+    0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
+    0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
+    0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
+    0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
+    0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
+    0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
+    0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
+    0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
+    0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
+    0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
+    0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
+    0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
+    0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
+    0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
+    0x2d02ef8dUL
+#ifdef BYFOUR
+  },
+  {
+    0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
+    0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
+    0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
+    0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
+    0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
+    0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
+    0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
+    0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
+    0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
+    0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
+    0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
+    0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
+    0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
+    0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
+    0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
+    0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
+    0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
+    0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
+    0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
+    0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
+    0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
+    0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
+    0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
+    0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
+    0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
+    0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
+    0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
+    0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
+    0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
+    0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
+    0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
+    0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
+    0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
+    0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
+    0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
+    0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
+    0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
+    0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
+    0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
+    0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
+    0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
+    0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
+    0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
+    0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
+    0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
+    0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
+    0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
+    0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
+    0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
+    0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
+    0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
+    0x9324fd72UL
+  },
+  {
+    0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
+    0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
+    0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
+    0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
+    0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
+    0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
+    0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
+    0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
+    0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
+    0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
+    0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
+    0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
+    0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
+    0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
+    0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
+    0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
+    0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
+    0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
+    0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
+    0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
+    0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
+    0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
+    0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
+    0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
+    0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
+    0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
+    0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
+    0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
+    0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
+    0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
+    0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
+    0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
+    0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
+    0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
+    0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
+    0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
+    0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
+    0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
+    0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
+    0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
+    0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
+    0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
+    0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
+    0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
+    0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
+    0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
+    0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
+    0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
+    0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
+    0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
+    0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
+    0xbe9834edUL
+  },
+  {
+    0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
+    0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
+    0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
+    0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
+    0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
+    0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
+    0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
+    0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
+    0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
+    0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
+    0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
+    0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
+    0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
+    0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
+    0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
+    0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
+    0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
+    0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
+    0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
+    0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
+    0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
+    0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
+    0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
+    0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
+    0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
+    0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
+    0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
+    0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
+    0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
+    0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
+    0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
+    0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
+    0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
+    0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
+    0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
+    0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
+    0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
+    0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
+    0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
+    0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
+    0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
+    0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
+    0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
+    0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
+    0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
+    0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
+    0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
+    0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
+    0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
+    0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
+    0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
+    0xde0506f1UL
+  },
+  {
+    0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
+    0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
+    0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
+    0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
+    0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
+    0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
+    0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
+    0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
+    0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
+    0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
+    0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
+    0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
+    0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
+    0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
+    0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
+    0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
+    0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
+    0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
+    0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
+    0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
+    0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
+    0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
+    0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
+    0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
+    0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
+    0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
+    0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
+    0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
+    0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
+    0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
+    0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
+    0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
+    0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
+    0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
+    0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
+    0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
+    0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
+    0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
+    0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
+    0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
+    0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
+    0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
+    0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
+    0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
+    0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
+    0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
+    0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
+    0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
+    0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
+    0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
+    0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
+    0x8def022dUL
+  },
+  {
+    0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
+    0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
+    0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
+    0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
+    0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
+    0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
+    0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
+    0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
+    0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
+    0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
+    0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
+    0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
+    0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
+    0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
+    0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
+    0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
+    0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
+    0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
+    0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
+    0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
+    0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
+    0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
+    0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
+    0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
+    0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
+    0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
+    0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
+    0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
+    0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
+    0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
+    0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
+    0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
+    0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
+    0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
+    0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
+    0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
+    0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
+    0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
+    0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
+    0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
+    0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
+    0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
+    0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
+    0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
+    0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
+    0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
+    0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
+    0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
+    0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
+    0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
+    0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
+    0x72fd2493UL
+  },
+  {
+    0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
+    0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
+    0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
+    0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
+    0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
+    0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
+    0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
+    0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
+    0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
+    0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
+    0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
+    0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
+    0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
+    0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
+    0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
+    0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
+    0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
+    0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
+    0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
+    0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
+    0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
+    0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
+    0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
+    0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
+    0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
+    0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
+    0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
+    0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
+    0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
+    0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
+    0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
+    0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
+    0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
+    0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
+    0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
+    0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
+    0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
+    0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
+    0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
+    0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
+    0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
+    0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
+    0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
+    0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
+    0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
+    0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
+    0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
+    0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
+    0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
+    0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
+    0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
+    0xed3498beUL
+  },
+  {
+    0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
+    0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
+    0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
+    0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
+    0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
+    0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
+    0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
+    0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
+    0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
+    0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
+    0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
+    0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
+    0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
+    0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
+    0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
+    0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
+    0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
+    0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
+    0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
+    0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
+    0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
+    0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
+    0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
+    0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
+    0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
+    0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
+    0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
+    0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
+    0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
+    0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
+    0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
+    0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
+    0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
+    0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
+    0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
+    0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
+    0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
+    0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
+    0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
+    0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
+    0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
+    0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
+    0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
+    0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
+    0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
+    0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
+    0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
+    0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
+    0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
+    0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
+    0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
+    0xf10605deUL
+#endif
+  }
+};
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/deflate.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,1991 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* deflate.c -- compress data using the deflation algorithm
+ * Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ *  ALGORITHM
+ *
+ *      The "deflation" process depends on being able to identify portions
+ *      of the input text which are identical to earlier input (within a
+ *      sliding window trailing behind the input currently being processed).
+ *
+ *      The most straightforward technique turns out to be the fastest for
+ *      most input files: try all possible matches and select the longest.
+ *      The key feature of this algorithm is that insertions into the string
+ *      dictionary are very simple and thus fast, and deletions are avoided
+ *      completely. Insertions are performed at each input character, whereas
+ *      string matches are performed only when the previous match ends. So it
+ *      is preferable to spend more time in matches to allow very fast string
+ *      insertions and avoid deletions. The matching algorithm for small
+ *      strings is inspired from that of Rabin & Karp. A brute force approach
+ *      is used to find longer strings when a small match has been found.
+ *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
+ *      (by Leonid Broukhis).
+ *         A previous version of this file used a more sophisticated algorithm
+ *      (by Fiala and Greene) which is guaranteed to run in linear amortized
+ *      time, but has a larger average cost, uses more memory and is patented.
+ *      However the F&G algorithm may be faster for some highly redundant
+ *      files if the parameter max_chain_length (described below) is too large.
+ *
+ *  ACKNOWLEDGEMENTS
+ *
+ *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
+ *      I found it in 'freeze' written by Leonid Broukhis.
+ *      Thanks to many people for bug reports and testing.
+ *
+ *  REFERENCES
+ *
+ *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
+ *      Available in http://tools.ietf.org/html/rfc1951
+ *
+ *      A description of the Rabin and Karp algorithm is given in the book
+ *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
+ *
+ *      Fiala,E.R., and Greene,D.H.
+ *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
+ *
+ */
+
+/* @(#) $Id$ */
+
+#include "deflate.h"
+
+const char deflate_copyright[] =
+   " deflate 1.2.8 Copyright 1995-2013 Jean-loup Gailly and Mark Adler ";
+/*
+  If you use the zlib library in a product, an acknowledgment is welcome
+  in the documentation of your product. If for some reason you cannot
+  include such an acknowledgment, I would appreciate that you keep this
+  copyright string in the executable of your product.
+ */
+
+/* ===========================================================================
+ *  Function prototypes.
+ */
+typedef enum {
+    need_more,      /* block not completed, need more input or more output */
+    block_done,     /* block flush performed */
+    finish_started, /* finish started, need only more output at next deflate */
+    finish_done     /* finish done, accept no more input or output */
+} block_state;
+
+typedef block_state (*compress_func) OF((deflate_state *s, int flush));
+/* Compression function. Returns the block state after the call. */
+
+local void fill_window    OF((deflate_state *s));
+local block_state deflate_stored OF((deflate_state *s, int flush));
+local block_state deflate_fast   OF((deflate_state *s, int flush));
+#ifndef FASTEST
+local block_state deflate_slow   OF((deflate_state *s, int flush));
+#endif
+local block_state deflate_rle    OF((deflate_state *s, int flush));
+local block_state deflate_huff   OF((deflate_state *s, int flush));
+local void lm_init        OF((deflate_state *s));
+local void putShortMSB    OF((deflate_state *s, uInt b));
+local void flush_pending  OF((z_streamp strm));
+local int read_buf        OF((z_streamp strm, Bytef *buf, unsigned size));
+#ifdef ASMV
+      void match_init OF((void)); /* asm code initialization */
+      uInt longest_match  OF((deflate_state *s, IPos cur_match));
+#else
+local uInt longest_match  OF((deflate_state *s, IPos cur_match));
+#endif
+
+#ifdef DEBUG
+local  void check_match OF((deflate_state *s, IPos start, IPos match,
+                            int length));
+#endif
+
+/* ===========================================================================
+ * Local data
+ */
+
+#define NIL 0
+/* Tail of hash chains */
+
+#ifndef TOO_FAR
+#  define TOO_FAR 4096
+#endif
+/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
+
+/* Values for max_lazy_match, good_match and max_chain_length, depending on
+ * the desired pack level (0..9). The values given below have been tuned to
+ * exclude worst case performance for pathological files. Better values may be
+ * found for specific files.
+ */
+typedef struct config_s {
+   ush good_length; /* reduce lazy search above this match length */
+   ush max_lazy;    /* do not perform lazy search above this match length */
+   ush nice_length; /* quit search above this match length */
+   ush max_chain;
+   compress_func func;
+} config;
+
+#ifdef FASTEST
+local const config configuration_table[2] = {
+/*      good lazy nice chain */
+/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
+/* 1 */ {4,    4,  8,    4, deflate_fast}}; /* max speed, no lazy matches */
+#else
+local const config configuration_table[10] = {
+/*      good lazy nice chain */
+/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
+/* 1 */ {4,    4,  8,    4, deflate_fast}, /* max speed, no lazy matches */
+/* 2 */ {4,    5, 16,    8, deflate_fast},
+/* 3 */ {4,    6, 32,   32, deflate_fast},
+
+/* 4 */ {4,    4, 16,   16, deflate_slow},  /* lazy matches */
+/* 5 */ {8,   16, 32,   32, deflate_slow},
+/* 6 */ {8,   16, 128, 128, deflate_slow},
+/* 7 */ {8,   32, 128, 256, deflate_slow},
+/* 8 */ {32, 128, 258, 1024, deflate_slow},
+/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */
+#endif
+
+/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
+ * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
+ * meaning.
+ */
+
+#define EQUAL 0
+/* result of memcmp for equal strings */
+
+#ifndef NO_DUMMY_DECL
+struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
+#endif
+
+/* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */
+#define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0))
+
+/* ===========================================================================
+ * Update a hash value with the given input byte
+ * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
+ *    input characters, so that a running hash key can be computed from the
+ *    previous key instead of complete recalculation each time.
+ */
+#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
+
+
+/* ===========================================================================
+ * Insert string str in the dictionary and set match_head to the previous head
+ * of the hash chain (the most recent string with same hash key). Return
+ * the previous length of the hash chain.
+ * If this file is compiled with -DFASTEST, the compression level is forced
+ * to 1, and no hash chains are maintained.
+ * IN  assertion: all calls to to INSERT_STRING are made with consecutive
+ *    input characters and the first MIN_MATCH bytes of str are valid
+ *    (except for the last MIN_MATCH-1 bytes of the input file).
+ */
+#ifdef FASTEST
+#define INSERT_STRING(s, str, match_head) \
+   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+    match_head = s->head[s->ins_h], \
+    s->head[s->ins_h] = (Pos)(str))
+#else
+#define INSERT_STRING(s, str, match_head) \
+   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+    match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
+    s->head[s->ins_h] = (Pos)(str))
+#endif
+
+/* ===========================================================================
+ * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
+ * prev[] will be initialized on the fly.
+ */
+#define CLEAR_HASH(s) \
+    s->head[s->hash_size-1] = NIL; \
+    zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
+
+/* ========================================================================= */
+int ZEXPORT deflateInit_(strm, level, version, stream_size)
+    z_streamp strm;
+    int level;
+    const char *version;
+    int stream_size;
+{
+    return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
+                         Z_DEFAULT_STRATEGY, version, stream_size);
+    /* To do: ignore strm->next_in if we use it as window */
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
+                  version, stream_size)
+    z_streamp strm;
+    int  level;
+    int  method;
+    int  windowBits;
+    int  memLevel;
+    int  strategy;
+    const char *version;
+    int stream_size;
+{
+    deflate_state *s;
+    int wrap = 1;
+    static const char my_version[] = ZLIB_VERSION;
+
+    ushf *overlay;
+    /* We overlay pending_buf and d_buf+l_buf. This works since the average
+     * output size for (length,distance) codes is <= 24 bits.
+     */
+
+    if (version == Z_NULL || version[0] != my_version[0] ||
+        stream_size != sizeof(z_stream)) {
+        return Z_VERSION_ERROR;
+    }
+    if (strm == Z_NULL) return Z_STREAM_ERROR;
+
+    strm->msg = Z_NULL;
+    if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zalloc = zcalloc;
+        strm->opaque = (voidpf)0;
+#endif
+    }
+    if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zfree = zcfree;
+#endif
+
+#ifdef FASTEST
+    if (level != 0) level = 1;
+#else
+    if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#endif
+
+    if (windowBits < 0) { /* suppress zlib wrapper */
+        wrap = 0;
+        windowBits = -windowBits;
+    }
+#ifdef GZIP
+    else if (windowBits > 15) {
+        wrap = 2;       /* write gzip wrapper instead */
+        windowBits -= 16;
+    }
+#endif
+    if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
+        windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
+        strategy < 0 || strategy > Z_FIXED) {
+        return Z_STREAM_ERROR;
+    }
+    if (windowBits == 8) windowBits = 9;  /* until 256-byte window bug fixed */
+    s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
+    if (s == Z_NULL) return Z_MEM_ERROR;
+    strm->state = (struct internal_state FAR *)s;
+    s->strm = strm;
+
+    s->wrap = wrap;
+    s->gzhead = Z_NULL;
+    s->w_bits = windowBits;
+    s->w_size = 1 << s->w_bits;
+    s->w_mask = s->w_size - 1;
+
+    s->hash_bits = memLevel + 7;
+    s->hash_size = 1 << s->hash_bits;
+    s->hash_mask = s->hash_size - 1;
+    s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
+
+    s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
+    s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
+    s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
+
+    s->high_water = 0;      /* nothing written to s->window yet */
+
+    s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
+
+    overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
+    s->pending_buf = (uchf *) overlay;
+    s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
+
+    if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
+        s->pending_buf == Z_NULL) {
+        s->status = FINISH_STATE;
+        strm->msg = ERR_MSG(Z_MEM_ERROR);
+        deflateEnd (strm);
+        return Z_MEM_ERROR;
+    }
+    s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
+    s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
+
+    s->level = level;
+    s->strategy = strategy;
+    s->method = (Byte)method;
+
+    return deflateReset(strm);
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
+    z_streamp strm;
+    const Bytef *dictionary;
+    uInt  dictLength;
+{
+    deflate_state *s;
+    uInt str, n;
+    int wrap;
+    unsigned avail;
+    z_const unsigned char *next;
+
+    if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL)
+        return Z_STREAM_ERROR;
+    s = strm->state;
+    wrap = s->wrap;
+    if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead)
+        return Z_STREAM_ERROR;
+
+    /* when using zlib wrappers, compute Adler-32 for provided dictionary */
+    if (wrap == 1)
+        strm->adler = adler32(strm->adler, dictionary, dictLength);
+    s->wrap = 0;                    /* avoid computing Adler-32 in read_buf */
+
+    /* if dictionary would fill window, just replace the history */
+    if (dictLength >= s->w_size) {
+        if (wrap == 0) {            /* already empty otherwise */
+            CLEAR_HASH(s);
+            s->strstart = 0;
+            s->block_start = 0L;
+            s->insert = 0;
+        }
+        dictionary += dictLength - s->w_size;  /* use the tail */
+        dictLength = s->w_size;
+    }
+
+    /* insert dictionary into window and hash */
+    avail = strm->avail_in;
+    next = strm->next_in;
+    strm->avail_in = dictLength;
+    strm->next_in = (z_const Bytef *)dictionary;
+    fill_window(s);
+    while (s->lookahead >= MIN_MATCH) {
+        str = s->strstart;
+        n = s->lookahead - (MIN_MATCH-1);
+        do {
+            UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
+#ifndef FASTEST
+            s->prev[str & s->w_mask] = s->head[s->ins_h];
+#endif
+            s->head[s->ins_h] = (Pos)str;
+            str++;
+        } while (--n);
+        s->strstart = str;
+        s->lookahead = MIN_MATCH-1;
+        fill_window(s);
+    }
+    s->strstart += s->lookahead;
+    s->block_start = (long)s->strstart;
+    s->insert = s->lookahead;
+    s->lookahead = 0;
+    s->match_length = s->prev_length = MIN_MATCH-1;
+    s->match_available = 0;
+    strm->next_in = next;
+    strm->avail_in = avail;
+    s->wrap = wrap;
+    return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateResetKeep (strm)
+    z_streamp strm;
+{
+    deflate_state *s;
+
+    if (strm == Z_NULL || strm->state == Z_NULL ||
+        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) {
+        return Z_STREAM_ERROR;
+    }
+
+    strm->total_in = strm->total_out = 0;
+    strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
+    strm->data_type = Z_UNKNOWN;
+
+    s = (deflate_state *)strm->state;
+    s->pending = 0;
+    s->pending_out = s->pending_buf;
+
+    if (s->wrap < 0) {
+        s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */
+    }
+    s->status = s->wrap ? INIT_STATE : BUSY_STATE;
+    strm->adler =
+#ifdef GZIP
+        s->wrap == 2 ? crc32(0L, Z_NULL, 0) :
+#endif
+        adler32(0L, Z_NULL, 0);
+    s->last_flush = Z_NO_FLUSH;
+
+    _tr_init(s);
+
+    return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateReset (strm)
+    z_streamp strm;
+{
+    int ret;
+
+    ret = deflateResetKeep(strm);
+    if (ret == Z_OK)
+        lm_init(strm->state);
+    return ret;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateSetHeader (strm, head)
+    z_streamp strm;
+    gz_headerp head;
+{
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (strm->state->wrap != 2) return Z_STREAM_ERROR;
+    strm->state->gzhead = head;
+    return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflatePending (strm, pending, bits)
+    unsigned *pending;
+    int *bits;
+    z_streamp strm;
+{
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (pending != Z_NULL)
+        *pending = strm->state->pending;
+    if (bits != Z_NULL)
+        *bits = strm->state->bi_valid;
+    return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflatePrime (strm, bits, value)
+    z_streamp strm;
+    int bits;
+    int value;
+{
+    deflate_state *s;
+    int put;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    s = strm->state;
+    if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3))
+        return Z_BUF_ERROR;
+    do {
+        put = Buf_size - s->bi_valid;
+        if (put > bits)
+            put = bits;
+        s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid);
+        s->bi_valid += put;
+        _tr_flush_bits(s);
+        value >>= put;
+        bits -= put;
+    } while (bits);
+    return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateParams(strm, level, strategy)
+    z_streamp strm;
+    int level;
+    int strategy;
+{
+    deflate_state *s;
+    compress_func func;
+    int err = Z_OK;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    s = strm->state;
+
+#ifdef FASTEST
+    if (level != 0) level = 1;
+#else
+    if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#endif
+    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
+        return Z_STREAM_ERROR;
+    }
+    func = configuration_table[s->level].func;
+
+    if ((strategy != s->strategy || func != configuration_table[level].func) &&
+        strm->total_in != 0) {
+        /* Flush the last buffer: */
+        err = deflate(strm, Z_BLOCK);
+        if (err == Z_BUF_ERROR && s->pending == 0)
+            err = Z_OK;
+    }
+    if (s->level != level) {
+        s->level = level;
+        s->max_lazy_match   = configuration_table[level].max_lazy;
+        s->good_match       = configuration_table[level].good_length;
+        s->nice_match       = configuration_table[level].nice_length;
+        s->max_chain_length = configuration_table[level].max_chain;
+    }
+    s->strategy = strategy;
+    return err;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
+    z_streamp strm;
+    int good_length;
+    int max_lazy;
+    int nice_length;
+    int max_chain;
+{
+    deflate_state *s;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    s = strm->state;
+    s->good_match = good_length;
+    s->max_lazy_match = max_lazy;
+    s->nice_match = nice_length;
+    s->max_chain_length = max_chain;
+    return Z_OK;
+}
+
+/* =========================================================================
+ * For the default windowBits of 15 and memLevel of 8, this function returns
+ * a close to exact, as well as small, upper bound on the compressed size.
+ * They are coded as constants here for a reason--if the #define's are
+ * changed, then this function needs to be changed as well.  The return
+ * value for 15 and 8 only works for those exact settings.
+ *
+ * For any setting other than those defaults for windowBits and memLevel,
+ * the value returned is a conservative worst case for the maximum expansion
+ * resulting from using fixed blocks instead of stored blocks, which deflate
+ * can emit on compressed data for some combinations of the parameters.
+ *
+ * This function could be more sophisticated to provide closer upper bounds for
+ * every combination of windowBits and memLevel.  But even the conservative
+ * upper bound of about 14% expansion does not seem onerous for output buffer
+ * allocation.
+ */
+uLong ZEXPORT deflateBound(strm, sourceLen)
+    z_streamp strm;
+    uLong sourceLen;
+{
+    deflate_state *s;
+    uLong complen, wraplen;
+    Bytef *str;
+
+    /* conservative upper bound for compressed data */
+    complen = sourceLen +
+              ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5;
+
+    /* if can't get parameters, return conservative bound plus zlib wrapper */
+    if (strm == Z_NULL || strm->state == Z_NULL)
+        return complen + 6;
+
+    /* compute wrapper length */
+    s = strm->state;
+    switch (s->wrap) {
+    case 0:                                 /* raw deflate */
+        wraplen = 0;
+        break;
+    case 1:                                 /* zlib wrapper */
+        wraplen = 6 + (s->strstart ? 4 : 0);
+        break;
+    case 2:                                 /* gzip wrapper */
+        wraplen = 18;
+        if (s->gzhead != Z_NULL) {          /* user-supplied gzip header */
+            if (s->gzhead->extra != Z_NULL)
+                wraplen += 2 + s->gzhead->extra_len;
+            str = s->gzhead->name;
+            if (str != Z_NULL)
+                do {
+                    wraplen++;
+                } while (*str++);
+            str = s->gzhead->comment;
+            if (str != Z_NULL)
+                do {
+                    wraplen++;
+                } while (*str++);
+            if (s->gzhead->hcrc)
+                wraplen += 2;
+        }
+        break;
+    default:                                /* for compiler happiness */
+        wraplen = 6;
+    }
+
+    /* if not default parameters, return conservative bound */
+    if (s->w_bits != 15 || s->hash_bits != 8 + 7)
+        return complen + wraplen;
+
+    /* default settings: return tight bound for that case */
+    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+           (sourceLen >> 25) + 13 - 6 + wraplen;
+}
+
+/* =========================================================================
+ * Put a short in the pending buffer. The 16-bit value is put in MSB order.
+ * IN assertion: the stream state is correct and there is enough room in
+ * pending_buf.
+ */
+local void putShortMSB (s, b)
+    deflate_state *s;
+    uInt b;
+{
+    put_byte(s, (Byte)(b >> 8));
+    put_byte(s, (Byte)(b & 0xff));
+}
+
+/* =========================================================================
+ * Flush as much pending output as possible. All deflate() output goes
+ * through this function so some applications may wish to modify it
+ * to avoid allocating a large strm->next_out buffer and copying into it.
+ * (See also read_buf()).
+ */
+local void flush_pending(strm)
+    z_streamp strm;
+{
+    unsigned len;
+    deflate_state *s = strm->state;
+
+    _tr_flush_bits(s);
+    len = s->pending;
+    if (len > strm->avail_out) len = strm->avail_out;
+    if (len == 0) return;
+
+    zmemcpy(strm->next_out, s->pending_out, len);
+    strm->next_out  += len;
+    s->pending_out  += len;
+    strm->total_out += len;
+    strm->avail_out  -= len;
+    s->pending -= len;
+    if (s->pending == 0) {
+        s->pending_out = s->pending_buf;
+    }
+}
+
+/* ========================================================================= */
+int ZEXPORT deflate (strm, flush)
+    z_streamp strm;
+    int flush;
+{
+    int old_flush; /* value of flush param for previous deflate call */
+    deflate_state *s;
+
+    if (strm == Z_NULL || strm->state == Z_NULL ||
+        flush > Z_BLOCK || flush < 0) {
+        return Z_STREAM_ERROR;
+    }
+    s = strm->state;
+
+    if (strm->next_out == Z_NULL ||
+        (strm->next_in == Z_NULL && strm->avail_in != 0) ||
+        (s->status == FINISH_STATE && flush != Z_FINISH)) {
+        ERR_RETURN(strm, Z_STREAM_ERROR);
+    }
+    if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
+
+    s->strm = strm; /* just in case */
+    old_flush = s->last_flush;
+    s->last_flush = flush;
+
+    /* Write the header */
+    if (s->status == INIT_STATE) {
+#ifdef GZIP
+        if (s->wrap == 2) {
+            strm->adler = crc32(0L, Z_NULL, 0);
+            put_byte(s, 31);
+            put_byte(s, 139);
+            put_byte(s, 8);
+            if (s->gzhead == Z_NULL) {
+                put_byte(s, 0);
+                put_byte(s, 0);
+                put_byte(s, 0);
+                put_byte(s, 0);
+                put_byte(s, 0);
+                put_byte(s, s->level == 9 ? 2 :
+                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+                             4 : 0));
+                put_byte(s, OS_CODE);
+                s->status = BUSY_STATE;
+            }
+            else {
+                put_byte(s, (s->gzhead->text ? 1 : 0) +
+                            (s->gzhead->hcrc ? 2 : 0) +
+                            (s->gzhead->extra == Z_NULL ? 0 : 4) +
+                            (s->gzhead->name == Z_NULL ? 0 : 8) +
+                            (s->gzhead->comment == Z_NULL ? 0 : 16)
+                        );
+                put_byte(s, (Byte)(s->gzhead->time & 0xff));
+                put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
+                put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
+                put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
+                put_byte(s, s->level == 9 ? 2 :
+                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+                             4 : 0));
+                put_byte(s, s->gzhead->os & 0xff);
+                if (s->gzhead->extra != Z_NULL) {
+                    put_byte(s, s->gzhead->extra_len & 0xff);
+                    put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
+                }
+                if (s->gzhead->hcrc)
+                    strm->adler = crc32(strm->adler, s->pending_buf,
+                                        s->pending);
+                s->gzindex = 0;
+                s->status = EXTRA_STATE;
+            }
+        }
+        else
+#endif
+        {
+            uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
+            uInt level_flags;
+
+            if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
+                level_flags = 0;
+            else if (s->level < 6)
+                level_flags = 1;
+            else if (s->level == 6)
+                level_flags = 2;
+            else
+                level_flags = 3;
+            header |= (level_flags << 6);
+            if (s->strstart != 0) header |= PRESET_DICT;
+            header += 31 - (header % 31);
+
+            s->status = BUSY_STATE;
+            putShortMSB(s, header);
+
+            /* Save the adler32 of the preset dictionary: */
+            if (s->strstart != 0) {
+                putShortMSB(s, (uInt)(strm->adler >> 16));
+                putShortMSB(s, (uInt)(strm->adler & 0xffff));
+            }
+            strm->adler = adler32(0L, Z_NULL, 0);
+        }
+    }
+#ifdef GZIP
+    if (s->status == EXTRA_STATE) {
+        if (s->gzhead->extra != Z_NULL) {
+            uInt beg = s->pending;  /* start of bytes to update crc */
+
+            while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
+                if (s->pending == s->pending_buf_size) {
+                    if (s->gzhead->hcrc && s->pending > beg)
+                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                            s->pending - beg);
+                    flush_pending(strm);
+                    beg = s->pending;
+                    if (s->pending == s->pending_buf_size)
+                        break;
+                }
+                put_byte(s, s->gzhead->extra[s->gzindex]);
+                s->gzindex++;
+            }
+            if (s->gzhead->hcrc && s->pending > beg)
+                strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                    s->pending - beg);
+            if (s->gzindex == s->gzhead->extra_len) {
+                s->gzindex = 0;
+                s->status = NAME_STATE;
+            }
+        }
+        else
+            s->status = NAME_STATE;
+    }
+    if (s->status == NAME_STATE) {
+        if (s->gzhead->name != Z_NULL) {
+            uInt beg = s->pending;  /* start of bytes to update crc */
+            int val;
+
+            do {
+                if (s->pending == s->pending_buf_size) {
+                    if (s->gzhead->hcrc && s->pending > beg)
+                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                            s->pending - beg);
+                    flush_pending(strm);
+                    beg = s->pending;
+                    if (s->pending == s->pending_buf_size) {
+                        val = 1;
+                        break;
+                    }
+                }
+                val = s->gzhead->name[s->gzindex++];
+                put_byte(s, val);
+            } while (val != 0);
+            if (s->gzhead->hcrc && s->pending > beg)
+                strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                    s->pending - beg);
+            if (val == 0) {
+                s->gzindex = 0;
+                s->status = COMMENT_STATE;
+            }
+        }
+        else
+            s->status = COMMENT_STATE;
+    }
+    if (s->status == COMMENT_STATE) {
+        if (s->gzhead->comment != Z_NULL) {
+            uInt beg = s->pending;  /* start of bytes to update crc */
+            int val;
+
+            do {
+                if (s->pending == s->pending_buf_size) {
+                    if (s->gzhead->hcrc && s->pending > beg)
+                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                            s->pending - beg);
+                    flush_pending(strm);
+                    beg = s->pending;
+                    if (s->pending == s->pending_buf_size) {
+                        val = 1;
+                        break;
+                    }
+                }
+                val = s->gzhead->comment[s->gzindex++];
+                put_byte(s, val);
+            } while (val != 0);
+            if (s->gzhead->hcrc && s->pending > beg)
+                strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                    s->pending - beg);
+            if (val == 0)
+                s->status = HCRC_STATE;
+        }
+        else
+            s->status = HCRC_STATE;
+    }
+    if (s->status == HCRC_STATE) {
+        if (s->gzhead->hcrc) {
+            if (s->pending + 2 > s->pending_buf_size)
+                flush_pending(strm);
+            if (s->pending + 2 <= s->pending_buf_size) {
+                put_byte(s, (Byte)(strm->adler & 0xff));
+                put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+                strm->adler = crc32(0L, Z_NULL, 0);
+                s->status = BUSY_STATE;
+            }
+        }
+        else
+            s->status = BUSY_STATE;
+    }
+#endif
+
+    /* Flush as much pending output as possible */
+    if (s->pending != 0) {
+        flush_pending(strm);
+        if (strm->avail_out == 0) {
+            /* Since avail_out is 0, deflate will be called again with
+             * more output space, but possibly with both pending and
+             * avail_in equal to zero. There won't be anything to do,
+             * but this is not an error situation so make sure we
+             * return OK instead of BUF_ERROR at next call of deflate:
+             */
+            s->last_flush = -1;
+            return Z_OK;
+        }
+
+    /* Make sure there is something to do and avoid duplicate consecutive
+     * flushes. For repeated and useless calls with Z_FINISH, we keep
+     * returning Z_STREAM_END instead of Z_BUF_ERROR.
+     */
+    } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) &&
+               flush != Z_FINISH) {
+        ERR_RETURN(strm, Z_BUF_ERROR);
+    }
+
+    /* User must not provide more input after the first FINISH: */
+    if (s->status == FINISH_STATE && strm->avail_in != 0) {
+        ERR_RETURN(strm, Z_BUF_ERROR);
+    }
+
+    /* Start a new block or continue the current one.
+     */
+    if (strm->avail_in != 0 || s->lookahead != 0 ||
+        (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
+        block_state bstate;
+
+        bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
+                    (s->strategy == Z_RLE ? deflate_rle(s, flush) :
+                        (*(configuration_table[s->level].func))(s, flush));
+
+        if (bstate == finish_started || bstate == finish_done) {
+            s->status = FINISH_STATE;
+        }
+        if (bstate == need_more || bstate == finish_started) {
+            if (strm->avail_out == 0) {
+                s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
+            }
+            return Z_OK;
+            /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
+             * of deflate should use the same flush parameter to make sure
+             * that the flush is complete. So we don't have to output an
+             * empty block here, this will be done at next call. This also
+             * ensures that for a very small output buffer, we emit at most
+             * one empty block.
+             */
+        }
+        if (bstate == block_done) {
+            if (flush == Z_PARTIAL_FLUSH) {
+                _tr_align(s);
+            } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */
+                _tr_stored_block(s, (char*)0, 0L, 0);
+                /* For a full flush, this empty block will be recognized
+                 * as a special marker by inflate_sync().
+                 */
+                if (flush == Z_FULL_FLUSH) {
+                    CLEAR_HASH(s);             /* forget history */
+                    if (s->lookahead == 0) {
+                        s->strstart = 0;
+                        s->block_start = 0L;
+                        s->insert = 0;
+                    }
+                }
+            }
+            flush_pending(strm);
+            if (strm->avail_out == 0) {
+              s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
+              return Z_OK;
+            }
+        }
+    }
+    Assert(strm->avail_out > 0, "bug2");
+
+    if (flush != Z_FINISH) return Z_OK;
+    if (s->wrap <= 0) return Z_STREAM_END;
+
+    /* Write the trailer */
+#ifdef GZIP
+    if (s->wrap == 2) {
+        put_byte(s, (Byte)(strm->adler & 0xff));
+        put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+        put_byte(s, (Byte)((strm->adler >> 16) & 0xff));
+        put_byte(s, (Byte)((strm->adler >> 24) & 0xff));
+        put_byte(s, (Byte)(strm->total_in & 0xff));
+        put_byte(s, (Byte)((strm->total_in >> 8) & 0xff));
+        put_byte(s, (Byte)((strm->total_in >> 16) & 0xff));
+        put_byte(s, (Byte)((strm->total_in >> 24) & 0xff));
+    }
+    else
+#endif
+    {
+        putShortMSB(s, (uInt)(strm->adler >> 16));
+        putShortMSB(s, (uInt)(strm->adler & 0xffff));
+    }
+    flush_pending(strm);
+    /* If avail_out is zero, the application will call deflate again
+     * to flush the rest.
+     */
+    if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */
+    return s->pending != 0 ? Z_OK : Z_STREAM_END;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateEnd (strm)
+    z_streamp strm;
+{
+    int status;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+
+    status = strm->state->status;
+    if (status != INIT_STATE &&
+        status != EXTRA_STATE &&
+        status != NAME_STATE &&
+        status != COMMENT_STATE &&
+        status != HCRC_STATE &&
+        status != BUSY_STATE &&
+        status != FINISH_STATE) {
+      return Z_STREAM_ERROR;
+    }
+
+    /* Deallocate in reverse order of allocations: */
+    TRY_FREE(strm, strm->state->pending_buf);
+    TRY_FREE(strm, strm->state->head);
+    TRY_FREE(strm, strm->state->prev);
+    TRY_FREE(strm, strm->state->window);
+
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+
+    return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
+}
+
+/* =========================================================================
+ * Copy the source state to the destination state.
+ * To simplify the source, this is not supported for 16-bit MSDOS (which
+ * doesn't have enough memory anyway to duplicate compression states).
+ */
+int ZEXPORT deflateCopy (dest, source)
+    z_streamp dest;
+    z_streamp source;
+{
+#ifdef MAXSEG_64K
+    return Z_STREAM_ERROR;
+#else
+    deflate_state *ds;
+    deflate_state *ss;
+    ushf *overlay;
+
+
+    if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
+        return Z_STREAM_ERROR;
+    }
+
+    ss = source->state;
+
+    zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
+
+    ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
+    if (ds == Z_NULL) return Z_MEM_ERROR;
+    dest->state = (struct internal_state FAR *) ds;
+    zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state));
+    ds->strm = dest;
+
+    ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
+    ds->prev   = (Posf *)  ZALLOC(dest, ds->w_size, sizeof(Pos));
+    ds->head   = (Posf *)  ZALLOC(dest, ds->hash_size, sizeof(Pos));
+    overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
+    ds->pending_buf = (uchf *) overlay;
+
+    if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
+        ds->pending_buf == Z_NULL) {
+        deflateEnd (dest);
+        return Z_MEM_ERROR;
+    }
+    /* following zmemcpy do not work for 16-bit MSDOS */
+    zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
+    zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos));
+    zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos));
+    zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
+
+    ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
+    ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
+    ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
+
+    ds->l_desc.dyn_tree = ds->dyn_ltree;
+    ds->d_desc.dyn_tree = ds->dyn_dtree;
+    ds->bl_desc.dyn_tree = ds->bl_tree;
+
+    return Z_OK;
+#endif /* MAXSEG_64K */
+}
+
+/* ===========================================================================
+ * Read a new buffer from the current input stream, update the adler32
+ * and total number of bytes read.  All deflate() input goes through
+ * this function so some applications may wish to modify it to avoid
+ * allocating a large strm->next_in buffer and copying from it.
+ * (See also flush_pending()).
+ */
+local int read_buf(strm, buf, size)
+    z_streamp strm;
+    Bytef *buf;
+    unsigned size;
+{
+    unsigned len = strm->avail_in;
+
+    if (len > size) len = size;
+    if (len == 0) return 0;
+
+    strm->avail_in  -= len;
+
+    zmemcpy(buf, strm->next_in, len);
+    if (strm->state->wrap == 1) {
+        strm->adler = adler32(strm->adler, buf, len);
+    }
+#ifdef GZIP
+    else if (strm->state->wrap == 2) {
+        strm->adler = crc32(strm->adler, buf, len);
+    }
+#endif
+    strm->next_in  += len;
+    strm->total_in += len;
+
+    return (int)len;
+}
+
+/* ===========================================================================
+ * Initialize the "longest match" routines for a new zlib stream
+ */
+local void lm_init (s)
+    deflate_state *s;
+{
+    s->window_size = (ulg)2L*s->w_size;
+
+    CLEAR_HASH(s);
+
+    /* Set the default configuration parameters:
+     */
+    s->max_lazy_match   = configuration_table[s->level].max_lazy;
+    s->good_match       = configuration_table[s->level].good_length;
+    s->nice_match       = configuration_table[s->level].nice_length;
+    s->max_chain_length = configuration_table[s->level].max_chain;
+
+    s->strstart = 0;
+    s->block_start = 0L;
+    s->lookahead = 0;
+    s->insert = 0;
+    s->match_length = s->prev_length = MIN_MATCH-1;
+    s->match_available = 0;
+    s->ins_h = 0;
+#ifndef FASTEST
+#ifdef ASMV
+    match_init(); /* initialize the asm code */
+#endif
+#endif
+}
+
+#ifndef FASTEST
+/* ===========================================================================
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ * OUT assertion: the match length is not greater than s->lookahead.
+ */
+#ifndef ASMV
+/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
+ * match.S. The code will be functionally equivalent.
+ */
+local uInt longest_match(s, cur_match)
+    deflate_state *s;
+    IPos cur_match;                             /* current match */
+{
+    unsigned chain_length = s->max_chain_length;/* max hash chain length */
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    int best_len = s->prev_length;              /* best match length so far */
+    int nice_match = s->nice_match;             /* stop if match long enough */
+    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+        s->strstart - (IPos)MAX_DIST(s) : NIL;
+    /* Stop when cur_match becomes <= limit. To simplify the code,
+     * we prevent matches with the string of window index 0.
+     */
+    Posf *prev = s->prev;
+    uInt wmask = s->w_mask;
+
+#ifdef UNALIGNED_OK
+    /* Compare two bytes at a time. Note: this is not always beneficial.
+     * Try with and without -DUNALIGNED_OK to check.
+     */
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
+    register ush scan_start = *(ushf*)scan;
+    register ush scan_end   = *(ushf*)(scan+best_len-1);
+#else
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+    register Byte scan_end1  = scan[best_len-1];
+    register Byte scan_end   = scan[best_len];
+#endif
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    /* Do not waste too much time if we already have a good match: */
+    if (s->prev_length >= s->good_match) {
+        chain_length >>= 2;
+    }
+    /* Do not look for matches beyond the end of the input. This is necessary
+     * to make deflate deterministic.
+     */
+    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    do {
+        Assert(cur_match < s->strstart, "no future");
+        match = s->window + cur_match;
+
+        /* Skip to next match if the match length cannot increase
+         * or if the match length is less than 2.  Note that the checks below
+         * for insufficient lookahead only occur occasionally for performance
+         * reasons.  Therefore uninitialized memory will be accessed, and
+         * conditional jumps will be made that depend on those values.
+         * However the length of the match is limited to the lookahead, so
+         * the output of deflate is not affected by the uninitialized values.
+         */
+#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
+        /* This code assumes sizeof(unsigned short) == 2. Do not use
+         * UNALIGNED_OK if your compiler uses a different size.
+         */
+        if (*(ushf*)(match+best_len-1) != scan_end ||
+            *(ushf*)match != scan_start) continue;
+
+        /* It is not necessary to compare scan[2] and match[2] since they are
+         * always equal when the other bytes match, given that the hash keys
+         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
+         * strstart+3, +5, ... up to strstart+257. We check for insufficient
+         * lookahead only every 4th comparison; the 128th check will be made
+         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
+         * necessary to put more guard bytes at the end of the window, or
+         * to check more often for insufficient lookahead.
+         */
+        Assert(scan[2] == match[2], "scan[2]?");
+        scan++, match++;
+        do {
+        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 scan < strend);
+        /* The funny "do {}" generates better code on most compilers */
+
+        /* Here, scan <= window+strstart+257 */
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+        if (*scan == *match) scan++;
+
+        len = (MAX_MATCH - 1) - (int)(strend-scan);
+        scan = strend - (MAX_MATCH-1);
+
+#else /* UNALIGNED_OK */
+
+        if (match[best_len]   != scan_end  ||
+            match[best_len-1] != scan_end1 ||
+            *match            != *scan     ||
+            *++match          != scan[1])      continue;
+
+        /* The check at best_len-1 can be removed because it will be made
+         * again later. (This heuristic is not always a win.)
+         * It is not necessary to compare scan[2] and match[2] since they
+         * are always equal when the other bytes match, given that
+         * the hash keys are equal and that HASH_BITS >= 8.
+         */
+        scan += 2, match++;
+        Assert(*scan == *match, "match[2]?");
+
+        /* We check for insufficient lookahead only every 8th comparison;
+         * the 256th check will be made at strstart+258.
+         */
+        do {
+        } while (*++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 scan < strend);
+
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+        len = MAX_MATCH - (int)(strend - scan);
+        scan = strend - MAX_MATCH;
+
+#endif /* UNALIGNED_OK */
+
+        if (len > best_len) {
+            s->match_start = cur_match;
+            best_len = len;
+            if (len >= nice_match) break;
+#ifdef UNALIGNED_OK
+            scan_end = *(ushf*)(scan+best_len-1);
+#else
+            scan_end1  = scan[best_len-1];
+            scan_end   = scan[best_len];
+#endif
+        }
+    } while ((cur_match = prev[cur_match & wmask]) > limit
+             && --chain_length != 0);
+
+    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+    return s->lookahead;
+}
+#endif /* ASMV */
+
+#else /* FASTEST */
+
+/* ---------------------------------------------------------------------------
+ * Optimized version for FASTEST only
+ */
+local uInt longest_match(s, cur_match)
+    deflate_state *s;
+    IPos cur_match;                             /* current match */
+{
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    Assert(cur_match < s->strstart, "no future");
+
+    match = s->window + cur_match;
+
+    /* Return failure if the match length is less than 2:
+     */
+    if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
+
+    /* The check at best_len-1 can be removed because it will be made
+     * again later. (This heuristic is not always a win.)
+     * It is not necessary to compare scan[2] and match[2] since they
+     * are always equal when the other bytes match, given that
+     * the hash keys are equal and that HASH_BITS >= 8.
+     */
+    scan += 2, match += 2;
+    Assert(*scan == *match, "match[2]?");
+
+    /* We check for insufficient lookahead only every 8th comparison;
+     * the 256th check will be made at strstart+258.
+     */
+    do {
+    } while (*++scan == *++match && *++scan == *++match &&
+             *++scan == *++match && *++scan == *++match &&
+             *++scan == *++match && *++scan == *++match &&
+             *++scan == *++match && *++scan == *++match &&
+             scan < strend);
+
+    Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+    len = MAX_MATCH - (int)(strend - scan);
+
+    if (len < MIN_MATCH) return MIN_MATCH - 1;
+
+    s->match_start = cur_match;
+    return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead;
+}
+
+#endif /* FASTEST */
+
+#ifdef DEBUG
+/* ===========================================================================
+ * Check that the match at match_start is indeed a match.
+ */
+local void check_match(s, start, match, length)
+    deflate_state *s;
+    IPos start, match;
+    int length;
+{
+    /* check that the match is indeed a match */
+    if (zmemcmp(s->window + match,
+                s->window + start, length) != EQUAL) {
+        fprintf(stderr, " start %u, match %u, length %d\n",
+                start, match, length);
+        do {
+            fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
+        } while (--length != 0);
+        z_error("invalid match");
+    }
+    if (z_verbose > 1) {
+        fprintf(stderr,"\\[%d,%d]", start-match, length);
+        do { putc(s->window[start++], stderr); } while (--length != 0);
+    }
+}
+#else
+#  define check_match(s, start, match, length)
+#endif /* DEBUG */
+
+/* ===========================================================================
+ * Fill the window when the lookahead becomes insufficient.
+ * Updates strstart and lookahead.
+ *
+ * IN assertion: lookahead < MIN_LOOKAHEAD
+ * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+ *    At least one byte has been read, or avail_in == 0; reads are
+ *    performed for at least two bytes (required for the zip translate_eol
+ *    option -- not supported here).
+ */
+local void fill_window(s)
+    deflate_state *s;
+{
+    register unsigned n, m;
+    register Posf *p;
+    unsigned more;    /* Amount of free space at the end of the window. */
+    uInt wsize = s->w_size;
+
+    Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");
+
+    do {
+        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
+
+        /* Deal with !@#$% 64K limit: */
+        if (sizeof(int) <= 2) {
+            if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
+                more = wsize;
+
+            } else if (more == (unsigned)(-1)) {
+                /* Very unlikely, but possible on 16 bit machine if
+                 * strstart == 0 && lookahead == 1 (input done a byte at time)
+                 */
+                more--;
+            }
+        }
+
+        /* If the window is almost full and there is insufficient lookahead,
+         * move the upper half to the lower one to make room in the upper half.
+         */
+        if (s->strstart >= wsize+MAX_DIST(s)) {
+
+            zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
+            s->match_start -= wsize;
+            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
+            s->block_start -= (long) wsize;
+
+            /* Slide the hash table (could be avoided with 32 bit values
+               at the expense of memory usage). We slide even when level == 0
+               to keep the hash table consistent if we switch back to level > 0
+               later. (Using level 0 permanently is not an optimal usage of
+               zlib, so we don't care about this pathological case.)
+             */
+            n = s->hash_size;
+            p = &s->head[n];
+            do {
+                m = *--p;
+                *p = (Pos)(m >= wsize ? m-wsize : NIL);
+            } while (--n);
+
+            n = wsize;
+#ifndef FASTEST
+            p = &s->prev[n];
+            do {
+                m = *--p;
+                *p = (Pos)(m >= wsize ? m-wsize : NIL);
+                /* If n is not on any hash chain, prev[n] is garbage but
+                 * its value will never be used.
+                 */
+            } while (--n);
+#endif
+            more += wsize;
+        }
+        if (s->strm->avail_in == 0) break;
+
+        /* If there was no sliding:
+         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+         *    more == window_size - lookahead - strstart
+         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+         * => more >= window_size - 2*WSIZE + 2
+         * In the BIG_MEM or MMAP case (not yet supported),
+         *   window_size == input_size + MIN_LOOKAHEAD  &&
+         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
+         * Otherwise, window_size == 2*WSIZE so more >= 2.
+         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+         */
+        Assert(more >= 2, "more < 2");
+
+        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
+        s->lookahead += n;
+
+        /* Initialize the hash value now that we have some input: */
+        if (s->lookahead + s->insert >= MIN_MATCH) {
+            uInt str = s->strstart - s->insert;
+            s->ins_h = s->window[str];
+            UPDATE_HASH(s, s->ins_h, s->window[str + 1]);
+#if MIN_MATCH != 3
+            Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+            while (s->insert) {
+                UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
+#ifndef FASTEST
+                s->prev[str & s->w_mask] = s->head[s->ins_h];
+#endif
+                s->head[s->ins_h] = (Pos)str;
+                str++;
+                s->insert--;
+                if (s->lookahead + s->insert < MIN_MATCH)
+                    break;
+            }
+        }
+        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
+         * but this is not important since only literal bytes will be emitted.
+         */
+
+    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
+
+    /* If the WIN_INIT bytes after the end of the current data have never been
+     * written, then zero those bytes in order to avoid memory check reports of
+     * the use of uninitialized (or uninitialised as Julian writes) bytes by
+     * the longest match routines.  Update the high water mark for the next
+     * time through here.  WIN_INIT is set to MAX_MATCH since the longest match
+     * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
+     */
+    if (s->high_water < s->window_size) {
+        ulg curr = s->strstart + (ulg)(s->lookahead);
+        ulg init;
+
+        if (s->high_water < curr) {
+            /* Previous high water mark below current data -- zero WIN_INIT
+             * bytes or up to end of window, whichever is less.
+             */
+            init = s->window_size - curr;
+            if (init > WIN_INIT)
+                init = WIN_INIT;
+            zmemzero(s->window + curr, (unsigned)init);
+            s->high_water = curr + init;
+        }
+        else if (s->high_water < (ulg)curr + WIN_INIT) {
+            /* High water mark at or above current data, but below current data
+             * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
+             * to end of window, whichever is less.
+             */
+            init = (ulg)curr + WIN_INIT - s->high_water;
+            if (init > s->window_size - s->high_water)
+                init = s->window_size - s->high_water;
+            zmemzero(s->window + s->high_water, (unsigned)init);
+            s->high_water += init;
+        }
+    }
+
+    Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
+           "not enough room for search");
+}
+
+/* ===========================================================================
+ * Flush the current block, with given end-of-file flag.
+ * IN assertion: strstart is set to the end of the current match.
+ */
+#define FLUSH_BLOCK_ONLY(s, last) { \
+   _tr_flush_block(s, (s->block_start >= 0L ? \
+                   (charf *)&s->window[(unsigned)s->block_start] : \
+                   (charf *)Z_NULL), \
+                (ulg)((long)s->strstart - s->block_start), \
+                (last)); \
+   s->block_start = s->strstart; \
+   flush_pending(s->strm); \
+   Tracev((stderr,"[FLUSH]")); \
+}
+
+/* Same but force premature exit if necessary. */
+#define FLUSH_BLOCK(s, last) { \
+   FLUSH_BLOCK_ONLY(s, last); \
+   if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \
+}
+
+/* ===========================================================================
+ * Copy without compression as much as possible from the input stream, return
+ * the current block state.
+ * This function does not insert new strings in the dictionary since
+ * uncompressible data is probably not useful. This function is used
+ * only for the level=0 compression option.
+ * NOTE: this function should be optimized to avoid extra copying from
+ * window to pending_buf.
+ */
+local block_state deflate_stored(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
+     * to pending_buf_size, and each stored block has a 5 byte header:
+     */
+    ulg max_block_size = 0xffff;
+    ulg max_start;
+
+    if (max_block_size > s->pending_buf_size - 5) {
+        max_block_size = s->pending_buf_size - 5;
+    }
+
+    /* Copy as much as possible from input to output: */
+    for (;;) {
+        /* Fill the window as much as possible: */
+        if (s->lookahead <= 1) {
+
+            Assert(s->strstart < s->w_size+MAX_DIST(s) ||
+                   s->block_start >= (long)s->w_size, "slide too late");
+
+            fill_window(s);
+            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
+
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+        Assert(s->block_start >= 0L, "block gone");
+
+        s->strstart += s->lookahead;
+        s->lookahead = 0;
+
+        /* Emit a stored block if pending_buf will be full: */
+        max_start = s->block_start + max_block_size;
+        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
+            /* strstart == 0 is possible when wraparound on 16-bit machine */
+            s->lookahead = (uInt)(s->strstart - max_start);
+            s->strstart = (uInt)max_start;
+            FLUSH_BLOCK(s, 0);
+        }
+        /* Flush if we may have to slide, otherwise block_start may become
+         * negative and the data will be gone:
+         */
+        if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
+            FLUSH_BLOCK(s, 0);
+        }
+    }
+    s->insert = 0;
+    if (flush == Z_FINISH) {
+        FLUSH_BLOCK(s, 1);
+        return finish_done;
+    }
+    if ((long)s->strstart > s->block_start)
+        FLUSH_BLOCK(s, 0);
+    return block_done;
+}
+
+/* ===========================================================================
+ * Compress as much as possible from the input stream, return the current
+ * block state.
+ * This function does not perform lazy evaluation of matches and inserts
+ * new strings in the dictionary only for unmatched strings or for short
+ * matches. It is used only for the fast compression options.
+ */
+local block_state deflate_fast(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    IPos hash_head;       /* head of the hash chain */
+    int bflush;           /* set if current block must be flushed */
+
+    for (;;) {
+        /* Make sure that we always have enough lookahead, except
+         * at the end of the input file. We need MAX_MATCH bytes
+         * for the next match, plus MIN_MATCH bytes to insert the
+         * string following the next match.
+         */
+        if (s->lookahead < MIN_LOOKAHEAD) {
+            fill_window(s);
+            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+                return need_more;
+            }
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+
+        /* Insert the string window[strstart .. strstart+2] in the
+         * dictionary, and set hash_head to the head of the hash chain:
+         */
+        hash_head = NIL;
+        if (s->lookahead >= MIN_MATCH) {
+            INSERT_STRING(s, s->strstart, hash_head);
+        }
+
+        /* Find the longest match, discarding those <= prev_length.
+         * At this point we have always match_length < MIN_MATCH
+         */
+        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
+            /* To simplify the code, we prevent matches with the string
+             * of window index 0 (in particular we have to avoid a match
+             * of the string with itself at the start of the input file).
+             */
+            s->match_length = longest_match (s, hash_head);
+            /* longest_match() sets match_start */
+        }
+        if (s->match_length >= MIN_MATCH) {
+            check_match(s, s->strstart, s->match_start, s->match_length);
+
+            _tr_tally_dist(s, s->strstart - s->match_start,
+                           s->match_length - MIN_MATCH, bflush);
+
+            s->lookahead -= s->match_length;
+
+            /* Insert new strings in the hash table only if the match length
+             * is not too large. This saves time but degrades compression.
+             */
+#ifndef FASTEST
+            if (s->match_length <= s->max_insert_length &&
+                s->lookahead >= MIN_MATCH) {
+                s->match_length--; /* string at strstart already in table */
+                do {
+                    s->strstart++;
+                    INSERT_STRING(s, s->strstart, hash_head);
+                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+                     * always MIN_MATCH bytes ahead.
+                     */
+                } while (--s->match_length != 0);
+                s->strstart++;
+            } else
+#endif
+            {
+                s->strstart += s->match_length;
+                s->match_length = 0;
+                s->ins_h = s->window[s->strstart];
+                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+#if MIN_MATCH != 3
+                Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
+                 * matter since it will be recomputed at next deflate call.
+                 */
+            }
+        } else {
+            /* No match, output a literal byte */
+            Tracevv((stderr,"%c", s->window[s->strstart]));
+            _tr_tally_lit (s, s->window[s->strstart], bflush);
+            s->lookahead--;
+            s->strstart++;
+        }
+        if (bflush) FLUSH_BLOCK(s, 0);
+    }
+    s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
+    if (flush == Z_FINISH) {
+        FLUSH_BLOCK(s, 1);
+        return finish_done;
+    }
+    if (s->last_lit)
+        FLUSH_BLOCK(s, 0);
+    return block_done;
+}
+
+#ifndef FASTEST
+/* ===========================================================================
+ * Same as above, but achieves better compression. We use a lazy
+ * evaluation for matches: a match is finally adopted only if there is
+ * no better match at the next window position.
+ */
+local block_state deflate_slow(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    IPos hash_head;          /* head of hash chain */
+    int bflush;              /* set if current block must be flushed */
+
+    /* Process the input block. */
+    for (;;) {
+        /* Make sure that we always have enough lookahead, except
+         * at the end of the input file. We need MAX_MATCH bytes
+         * for the next match, plus MIN_MATCH bytes to insert the
+         * string following the next match.
+         */
+        if (s->lookahead < MIN_LOOKAHEAD) {
+            fill_window(s);
+            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+                return need_more;
+            }
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+
+        /* Insert the string window[strstart .. strstart+2] in the
+         * dictionary, and set hash_head to the head of the hash chain:
+         */
+        hash_head = NIL;
+        if (s->lookahead >= MIN_MATCH) {
+            INSERT_STRING(s, s->strstart, hash_head);
+        }
+
+        /* Find the longest match, discarding those <= prev_length.
+         */
+        s->prev_length = s->match_length, s->prev_match = s->match_start;
+        s->match_length = MIN_MATCH-1;
+
+        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
+            s->strstart - hash_head <= MAX_DIST(s)) {
+            /* To simplify the code, we prevent matches with the string
+             * of window index 0 (in particular we have to avoid a match
+             * of the string with itself at the start of the input file).
+             */
+            s->match_length = longest_match (s, hash_head);
+            /* longest_match() sets match_start */
+
+            if (s->match_length <= 5 && (s->strategy == Z_FILTERED
+#if TOO_FAR <= 32767
+                || (s->match_length == MIN_MATCH &&
+                    s->strstart - s->match_start > TOO_FAR)
+#endif
+                )) {
+
+                /* If prev_match is also MIN_MATCH, match_start is garbage
+                 * but we will ignore the current match anyway.
+                 */
+                s->match_length = MIN_MATCH-1;
+            }
+        }
+        /* If there was a match at the previous step and the current
+         * match is not better, output the previous match:
+         */
+        if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
+            uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
+            /* Do not insert strings in hash table beyond this. */
+
+            check_match(s, s->strstart-1, s->prev_match, s->prev_length);
+
+            _tr_tally_dist(s, s->strstart -1 - s->prev_match,
+                           s->prev_length - MIN_MATCH, bflush);
+
+            /* Insert in hash table all strings up to the end of the match.
+             * strstart-1 and strstart are already inserted. If there is not
+             * enough lookahead, the last two strings are not inserted in
+             * the hash table.
+             */
+            s->lookahead -= s->prev_length-1;
+            s->prev_length -= 2;
+            do {
+                if (++s->strstart <= max_insert) {
+                    INSERT_STRING(s, s->strstart, hash_head);
+                }
+            } while (--s->prev_length != 0);
+            s->match_available = 0;
+            s->match_length = MIN_MATCH-1;
+            s->strstart++;
+
+            if (bflush) FLUSH_BLOCK(s, 0);
+
+        } else if (s->match_available) {
+            /* If there was no match at the previous position, output a
+             * single literal. If there was a match but the current match
+             * is longer, truncate the previous match to a single literal.
+             */
+            Tracevv((stderr,"%c", s->window[s->strstart-1]));
+            _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+            if (bflush) {
+                FLUSH_BLOCK_ONLY(s, 0);
+            }
+            s->strstart++;
+            s->lookahead--;
+            if (s->strm->avail_out == 0) return need_more;
+        } else {
+            /* There is no previous match to compare with, wait for
+             * the next step to decide.
+             */
+            s->match_available = 1;
+            s->strstart++;
+            s->lookahead--;
+        }
+    }
+    Assert (flush != Z_NO_FLUSH, "no flush?");
+    if (s->match_available) {
+        Tracevv((stderr,"%c", s->window[s->strstart-1]));
+        _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+        s->match_available = 0;
+    }
+    s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
+    if (flush == Z_FINISH) {
+        FLUSH_BLOCK(s, 1);
+        return finish_done;
+    }
+    if (s->last_lit)
+        FLUSH_BLOCK(s, 0);
+    return block_done;
+}
+#endif /* FASTEST */
+
+/* ===========================================================================
+ * For Z_RLE, simply look for runs of bytes, generate matches only of distance
+ * one.  Do not maintain a hash table.  (It will be regenerated if this run of
+ * deflate switches away from Z_RLE.)
+ */
+local block_state deflate_rle(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    int bflush;             /* set if current block must be flushed */
+    uInt prev;              /* byte at distance one to match */
+    Bytef *scan, *strend;   /* scan goes up to strend for length of run */
+
+    for (;;) {
+        /* Make sure that we always have enough lookahead, except
+         * at the end of the input file. We need MAX_MATCH bytes
+         * for the longest run, plus one for the unrolled loop.
+         */
+        if (s->lookahead <= MAX_MATCH) {
+            fill_window(s);
+            if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) {
+                return need_more;
+            }
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+
+        /* See how many times the previous byte repeats */
+        s->match_length = 0;
+        if (s->lookahead >= MIN_MATCH && s->strstart > 0) {
+            scan = s->window + s->strstart - 1;
+            prev = *scan;
+            if (prev == *++scan && prev == *++scan && prev == *++scan) {
+                strend = s->window + s->strstart + MAX_MATCH;
+                do {
+                } while (prev == *++scan && prev == *++scan &&
+                         prev == *++scan && prev == *++scan &&
+                         prev == *++scan && prev == *++scan &&
+                         prev == *++scan && prev == *++scan &&
+                         scan < strend);
+                s->match_length = MAX_MATCH - (int)(strend - scan);
+                if (s->match_length > s->lookahead)
+                    s->match_length = s->lookahead;
+            }
+            Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan");
+        }
+
+        /* Emit match if have run of MIN_MATCH or longer, else emit literal */
+        if (s->match_length >= MIN_MATCH) {
+            check_match(s, s->strstart, s->strstart - 1, s->match_length);
+
+            _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush);
+
+            s->lookahead -= s->match_length;
+            s->strstart += s->match_length;
+            s->match_length = 0;
+        } else {
+            /* No match, output a literal byte */
+            Tracevv((stderr,"%c", s->window[s->strstart]));
+            _tr_tally_lit (s, s->window[s->strstart], bflush);
+            s->lookahead--;
+            s->strstart++;
+        }
+        if (bflush) FLUSH_BLOCK(s, 0);
+    }
+    s->insert = 0;
+    if (flush == Z_FINISH) {
+        FLUSH_BLOCK(s, 1);
+        return finish_done;
+    }
+    if (s->last_lit)
+        FLUSH_BLOCK(s, 0);
+    return block_done;
+}
+
+/* ===========================================================================
+ * For Z_HUFFMAN_ONLY, do not look for matches.  Do not maintain a hash table.
+ * (It will be regenerated if this run of deflate switches away from Huffman.)
+ */
+local block_state deflate_huff(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    int bflush;             /* set if current block must be flushed */
+
+    for (;;) {
+        /* Make sure that we have a literal to write. */
+        if (s->lookahead == 0) {
+            fill_window(s);
+            if (s->lookahead == 0) {
+                if (flush == Z_NO_FLUSH)
+                    return need_more;
+                break;      /* flush the current block */
+            }
+        }
+
+        /* Output a literal byte */
+        s->match_length = 0;
+        Tracevv((stderr,"%c", s->window[s->strstart]));
+        _tr_tally_lit (s, s->window[s->strstart], bflush);
+        s->lookahead--;
+        s->strstart++;
+        if (bflush) FLUSH_BLOCK(s, 0);
+    }
+    s->insert = 0;
+    if (flush == Z_FINISH) {
+        FLUSH_BLOCK(s, 1);
+        return finish_done;
+    }
+    if (s->last_lit)
+        FLUSH_BLOCK(s, 0);
+    return block_done;
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/deflate.h	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,370 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* deflate.h -- internal compression state
+ * Copyright (C) 1995-2012 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id$ */
+
+#ifndef DEFLATE_H
+#define DEFLATE_H
+
+#include "zutil.h"
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+   trailer creation by deflate().  NO_GZIP would be used to avoid linking in
+   the crc code when it is not needed.  For shared libraries, gzip encoding
+   should be left enabled. */
+#ifndef NO_GZIP
+#  define GZIP
+#endif
+
+/* ===========================================================================
+ * Internal compression state.
+ */
+
+#define LENGTH_CODES 29
+/* number of length codes, not counting the special END_BLOCK code */
+
+#define LITERALS  256
+/* number of literal bytes 0..255 */
+
+#define L_CODES (LITERALS+1+LENGTH_CODES)
+/* number of Literal or Length codes, including the END_BLOCK code */
+
+#define D_CODES   30
+/* number of distance codes */
+
+#define BL_CODES  19
+/* number of codes used to transfer the bit lengths */
+
+#define HEAP_SIZE (2*L_CODES+1)
+/* maximum heap size */
+
+#define MAX_BITS 15
+/* All codes must not exceed MAX_BITS bits */
+
+#define Buf_size 16
+/* size of bit buffer in bi_buf */
+
+#define INIT_STATE    42
+#define EXTRA_STATE   69
+#define NAME_STATE    73
+#define COMMENT_STATE 91
+#define HCRC_STATE   103
+#define BUSY_STATE   113
+#define FINISH_STATE 666
+/* Stream status */
+
+
+/* Data structure describing a single value and its code string. */
+typedef struct ct_data_s {
+    union {
+        ush  freq;       /* frequency count */
+        ush  code;       /* bit string */
+    } fc;
+    union {
+        ush  dad;        /* father node in Huffman tree */
+        ush  len;        /* length of bit string */
+    } dl;
+} FAR ct_data;
+
+#define Freq fc.freq
+#define Code fc.code
+#define Dad  dl.dad
+#define Len  dl.len
+
+typedef struct static_tree_desc_s  static_tree_desc;
+
+typedef struct tree_desc_s {
+    ct_data *dyn_tree;           /* the dynamic tree */
+    int     max_code;            /* largest code with non zero frequency */
+    static_tree_desc *stat_desc; /* the corresponding static tree */
+} FAR tree_desc;
+
+typedef ush Pos;
+typedef Pos FAR Posf;
+typedef unsigned IPos;
+
+/* A Pos is an index in the character window. We use short instead of int to
+ * save space in the various tables. IPos is used only for parameter passing.
+ */
+
+typedef struct internal_state {
+    z_streamp strm;      /* pointer back to this zlib stream */
+    int   status;        /* as the name implies */
+    Bytef *pending_buf;  /* output still pending */
+    ulg   pending_buf_size; /* size of pending_buf */
+    Bytef *pending_out;  /* next pending byte to output to the stream */
+    uInt   pending;      /* nb of bytes in the pending buffer */
+    int   wrap;          /* bit 0 true for zlib, bit 1 true for gzip */
+    gz_headerp  gzhead;  /* gzip header information to write */
+    uInt   gzindex;      /* where in extra, name, or comment */
+    Byte  method;        /* can only be DEFLATED */
+    int   last_flush;    /* value of flush param for previous deflate call */
+
+                /* used by deflate.c: */
+
+    uInt  w_size;        /* LZ77 window size (32K by default) */
+    uInt  w_bits;        /* log2(w_size)  (8..16) */
+    uInt  w_mask;        /* w_size - 1 */
+
+    Bytef *window;
+    /* Sliding window. Input bytes are read into the second half of the window,
+     * and move to the first half later to keep a dictionary of at least wSize
+     * bytes. With this organization, matches are limited to a distance of
+     * wSize-MAX_MATCH bytes, but this ensures that IO is always
+     * performed with a length multiple of the block size. Also, it limits
+     * the window size to 64K, which is quite useful on MSDOS.
+     * To do: use the user input buffer as sliding window.
+     */
+
+    ulg window_size;
+    /* Actual size of window: 2*wSize, except when the user input buffer
+     * is directly used as sliding window.
+     */
+
+    Posf *prev;
+    /* Link to older string with same hash index. To limit the size of this
+     * array to 64K, this link is maintained only for the last 32K strings.
+     * An index in this array is thus a window index modulo 32K.
+     */
+
+    Posf *head; /* Heads of the hash chains or NIL. */
+
+    uInt  ins_h;          /* hash index of string to be inserted */
+    uInt  hash_size;      /* number of elements in hash table */
+    uInt  hash_bits;      /* log2(hash_size) */
+    uInt  hash_mask;      /* hash_size-1 */
+
+    uInt  hash_shift;
+    /* Number of bits by which ins_h must be shifted at each input
+     * step. It must be such that after MIN_MATCH steps, the oldest
+     * byte no longer takes part in the hash key, that is:
+     *   hash_shift * MIN_MATCH >= hash_bits
+     */
+
+    long block_start;
+    /* Window position at the beginning of the current output block. Gets
+     * negative when the window is moved backwards.
+     */
+
+    uInt match_length;           /* length of best match */
+    IPos prev_match;             /* previous match */
+    int match_available;         /* set if previous match exists */
+    uInt strstart;               /* start of string to insert */
+    uInt match_start;            /* start of matching string */
+    uInt lookahead;              /* number of valid bytes ahead in window */
+
+    uInt prev_length;
+    /* Length of the best match at previous step. Matches not greater than this
+     * are discarded. This is used in the lazy match evaluation.
+     */
+
+    uInt max_chain_length;
+    /* To speed up deflation, hash chains are never searched beyond this
+     * length.  A higher limit improves compression ratio but degrades the
+     * speed.
+     */
+
+    uInt max_lazy_match;
+    /* Attempt to find a better match only when the current match is strictly
+     * smaller than this value. This mechanism is used only for compression
+     * levels >= 4.
+     */
+#   define max_insert_length  max_lazy_match
+    /* Insert new strings in the hash table only if the match length is not
+     * greater than this length. This saves time but degrades compression.
+     * max_insert_length is used only for compression levels <= 3.
+     */
+
+    int level;    /* compression level (1..9) */
+    int strategy; /* favor or force Huffman coding*/
+
+    uInt good_match;
+    /* Use a faster search when the previous match is longer than this */
+
+    int nice_match; /* Stop searching when current match exceeds this */
+
+                /* used by trees.c: */
+    /* Didn't use ct_data typedef below to suppress compiler warning */
+    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
+    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
+    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
+
+    struct tree_desc_s l_desc;               /* desc. for literal tree */
+    struct tree_desc_s d_desc;               /* desc. for distance tree */
+    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
+
+    ush bl_count[MAX_BITS+1];
+    /* number of codes at each bit length for an optimal tree */
+
+    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
+    int heap_len;               /* number of elements in the heap */
+    int heap_max;               /* element of largest frequency */
+    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+     * The same heap array is used to build all trees.
+     */
+
+    uch depth[2*L_CODES+1];
+    /* Depth of each subtree used as tie breaker for trees of equal frequency
+     */
+
+    uchf *l_buf;          /* buffer for literals or lengths */
+
+    uInt  lit_bufsize;
+    /* Size of match buffer for literals/lengths.  There are 4 reasons for
+     * limiting lit_bufsize to 64K:
+     *   - frequencies can be kept in 16 bit counters
+     *   - if compression is not successful for the first block, all input
+     *     data is still in the window so we can still emit a stored block even
+     *     when input comes from standard input.  (This can also be done for
+     *     all blocks if lit_bufsize is not greater than 32K.)
+     *   - if compression is not successful for a file smaller than 64K, we can
+     *     even emit a stored file instead of a stored block (saving 5 bytes).
+     *     This is applicable only for zip (not gzip or zlib).
+     *   - creating new Huffman trees less frequently may not provide fast
+     *     adaptation to changes in the input data statistics. (Take for
+     *     example a binary file with poorly compressible code followed by
+     *     a highly compressible string table.) Smaller buffer sizes give
+     *     fast adaptation but have of course the overhead of transmitting
+     *     trees more frequently.
+     *   - I can't count above 4
+     */
+
+    uInt last_lit;      /* running index in l_buf */
+
+    ushf *d_buf;
+    /* Buffer for distances. To simplify the code, d_buf and l_buf have
+     * the same number of elements. To use different lengths, an extra flag
+     * array would be necessary.
+     */
+
+    ulg opt_len;        /* bit length of current block with optimal trees */
+    ulg static_len;     /* bit length of current block with static trees */
+    uInt matches;       /* number of string matches in current block */
+    uInt insert;        /* bytes at end of window left to insert */
+
+#ifdef DEBUG
+    ulg compressed_len; /* total bit length of compressed file mod 2^32 */
+    ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
+#endif
+
+    ush bi_buf;
+    /* Output buffer. bits are inserted starting at the bottom (least
+     * significant bits).
+     */
+    int bi_valid;
+    /* Number of valid bits in bi_buf.  All bits above the last valid bit
+     * are always zero.
+     */
+
+    ulg high_water;
+    /* High water mark offset in window for initialized bytes -- bytes above
+     * this are set to zero in order to avoid memory check warnings when
+     * longest match routines access bytes past the input.  This is then
+     * updated to the new high water mark.
+     */
+
+} FAR deflate_state;
+
+/* Output a byte on the stream.
+ * IN assertion: there is enough room in pending_buf.
+ */
+#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
+
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
+/* In order to simplify the code, particularly on 16 bit machines, match
+ * distances are limited to MAX_DIST instead of WSIZE.
+ */
+
+#define WIN_INIT MAX_MATCH
+/* Number of bytes after end of data in window to initialize in order to avoid
+   memory checker errors from longest match routines */
+
+        /* in trees.c */
+void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
+int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
+void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
+                        ulg stored_len, int last));
+void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s));
+void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
+void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
+                        ulg stored_len, int last));
+
+#define d_code(dist) \
+   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
+/* Mapping from a distance to a distance code. dist is the distance - 1 and
+ * must not have side effects. _dist_code[256] and _dist_code[257] are never
+ * used.
+ */
+
+#ifndef DEBUG
+/* Inline versions of _tr_tally for speed: */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+  extern uch ZLIB_INTERNAL _length_code[];
+  extern uch ZLIB_INTERNAL _dist_code[];
+#else
+  extern const uch ZLIB_INTERNAL _length_code[];
+  extern const uch ZLIB_INTERNAL _dist_code[];
+#endif
+
+# define _tr_tally_lit(s, c, flush) \
+  { uch cc = (c); \
+    s->d_buf[s->last_lit] = 0; \
+    s->l_buf[s->last_lit++] = cc; \
+    s->dyn_ltree[cc].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+   }
+# define _tr_tally_dist(s, distance, length, flush) \
+  { uch len = (length); \
+    ush dist = (distance); \
+    s->d_buf[s->last_lit] = dist; \
+    s->l_buf[s->last_lit++] = len; \
+    dist--; \
+    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+    s->dyn_dtree[d_code(dist)].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+  }
+#else
+# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
+# define _tr_tally_dist(s, distance, length, flush) \
+              flush = _tr_tally(s, distance, length)
+#endif
+
+#endif /* DEFLATE_H */
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/gzclose.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,49 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* gzclose.c -- zlib gzclose() function
+ * Copyright (C) 2004, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* gzclose() is in a separate file so that it is linked in only if it is used.
+   That way the other gzclose functions can be used instead to avoid linking in
+   unneeded compression or decompression routines. */
+int ZEXPORT gzclose(file)
+    gzFile file;
+{
+#ifndef NO_GZCOMPRESS
+    gz_statep state;
+
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+
+    return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file);
+#else
+    return gzclose_r(file);
+#endif
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/gzguts.h	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,233 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* gzguts.h -- zlib internal header definitions for gz* operations
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#ifdef _LARGEFILE64_SOURCE
+#  ifndef _LARGEFILE_SOURCE
+#    define _LARGEFILE_SOURCE 1
+#  endif
+#  ifdef _FILE_OFFSET_BITS
+#    undef _FILE_OFFSET_BITS
+#  endif
+#endif
+
+#ifdef HAVE_HIDDEN
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
+
+#include <stdio.h>
+#include "zlib.h"
+#ifdef STDC
+#  include <string.h>
+#  include <stdlib.h>
+#  include <limits.h>
+#endif
+#include <fcntl.h>
+
+#ifdef _WIN32
+#  include <stddef.h>
+#endif
+
+#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32)
+#  include <io.h>
+#endif
+
+#ifdef WINAPI_FAMILY
+#  define open _open
+#  define read _read
+#  define write _write
+#  define close _close
+#endif
+
+#ifdef NO_DEFLATE       /* for compatibility with old definition */
+#  define NO_GZCOMPRESS
+#endif
+
+#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#if defined(__CYGWIN__)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#ifndef HAVE_VSNPRINTF
+#  ifdef MSDOS
+/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
+   but for now we just assume it doesn't. */
+#    define NO_vsnprintf
+#  endif
+#  ifdef __TURBOC__
+#    define NO_vsnprintf
+#  endif
+#  ifdef WIN32
+/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
+#    if !defined(vsnprintf) && !defined(NO_vsnprintf)
+#      if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
+#         define vsnprintf _vsnprintf
+#      endif
+#    endif
+#  endif
+#  ifdef __SASC
+#    define NO_vsnprintf
+#  endif
+#  ifdef VMS
+#    define NO_vsnprintf
+#  endif
+#  ifdef __OS400__
+#    define NO_vsnprintf
+#  endif
+#  ifdef __MVS__
+#    define NO_vsnprintf
+#  endif
+#endif
+
+/* unlike snprintf (which is required in C99, yet still not supported by
+   Microsoft more than a decade later!), _snprintf does not guarantee null
+   termination of the result -- however this is only used in gzlib.c where
+   the result is assured to fit in the space provided */
+#ifdef _MSC_VER
+#  define snprintf _snprintf
+#endif
+
+#ifndef local
+#  define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+/* gz* functions always use library allocation functions */
+#ifndef STDC
+  extern voidp  malloc OF((uInt size));
+  extern void   free   OF((voidpf ptr));
+#endif
+
+/* get errno and strerror definition */
+#if defined UNDER_CE
+#  include <windows.h>
+#  define zstrerror() gz_strwinerror((DWORD)GetLastError())
+#else
+#  ifndef NO_STRERROR
+#    include <errno.h>
+#    define zstrerror() strerror(errno)
+#  else
+#    define zstrerror() "stdio error (consult errno)"
+#  endif
+#endif
+
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
+    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+    ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+    ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+    ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+#endif
+
+/* default memLevel */
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#endif
+
+/* default i/o buffer size -- double this for output when reading (this and
+   twice this must be able to fit in an unsigned type) */
+#define GZBUFSIZE 8192
+
+/* gzip modes, also provide a little integrity check on the passed structure */
+#define GZ_NONE 0
+#define GZ_READ 7247
+#define GZ_WRITE 31153
+#define GZ_APPEND 1     /* mode set to GZ_WRITE after the file is opened */
+
+/* values for gz_state how */
+#define LOOK 0      /* look for a gzip header */
+#define COPY 1      /* copy input directly */
+#define GZIP 2      /* decompress a gzip stream */
+
+/* internal gzip file state data structure */
+typedef struct {
+        /* exposed contents for gzgetc() macro */
+    struct gzFile_s x;      /* "x" for exposed */
+                            /* x.have: number of bytes available at x.next */
+                            /* x.next: next output data to deliver or write */
+                            /* x.pos: current position in uncompressed data */
+        /* used for both reading and writing */
+    int mode;               /* see gzip modes above */
+    int fd;                 /* file descriptor */
+    char *path;             /* path or fd for error messages */
+    unsigned size;          /* buffer size, zero if not allocated yet */
+    unsigned want;          /* requested buffer size, default is GZBUFSIZE */
+    unsigned char *in;      /* input buffer */
+    unsigned char *out;     /* output buffer (double-sized when reading) */
+    int direct;             /* 0 if processing gzip, 1 if transparent */
+        /* just for reading */
+    int how;                /* 0: get header, 1: copy, 2: decompress */
+    z_off64_t start;        /* where the gzip data started, for rewinding */
+    int eof;                /* true if end of input file reached */
+    int past;               /* true if read requested past end */
+        /* just for writing */
+    int level;              /* compression level */
+    int strategy;           /* compression strategy */
+        /* seek request */
+    z_off64_t skip;         /* amount to skip (already rewound if backwards) */
+    int seek;               /* true if seek request pending */
+        /* error information */
+    int err;                /* error code */
+    char *msg;              /* error message */
+        /* zlib inflate or deflate stream */
+    z_stream strm;          /* stream structure in-place (not a pointer) */
+} gz_state;
+typedef gz_state FAR *gz_statep;
+
+/* shared functions */
+void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
+#if defined UNDER_CE
+char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
+#endif
+
+/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
+   value -- needed when comparing unsigned to z_off64_t, which is signed
+   (possible z_off64_t types off_t, off64_t, and long are all signed) */
+#ifdef INT_MAX
+#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
+#else
+unsigned ZLIB_INTERNAL gz_intmax OF((void));
+#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
+#endif
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/gzlib.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,658 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* gzlib.c -- zlib functions common to reading and writing gzip files
+ * Copyright (C) 2004, 2010, 2011, 2012, 2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+#if defined(_WIN32) && !defined(__BORLANDC__)
+#  define LSEEK _lseeki64
+#else
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define LSEEK lseek64
+#else
+#  define LSEEK lseek
+#endif
+#endif
+
+/* Local functions */
+local void gz_reset OF((gz_statep));
+local gzFile gz_open OF((const void *, int, const char *));
+
+#if defined UNDER_CE
+
+/* Map the Windows error number in ERROR to a locale-dependent error message
+   string and return a pointer to it.  Typically, the values for ERROR come
+   from GetLastError.
+
+   The string pointed to shall not be modified by the application, but may be
+   overwritten by a subsequent call to gz_strwinerror
+
+   The gz_strwinerror function does not change the current setting of
+   GetLastError. */
+char ZLIB_INTERNAL *gz_strwinerror (error)
+     DWORD error;
+{
+    static char buf[1024];
+
+    wchar_t *msgbuf;
+    DWORD lasterr = GetLastError();
+    DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
+        | FORMAT_MESSAGE_ALLOCATE_BUFFER,
+        NULL,
+        error,
+        0, /* Default language */
+        (LPVOID)&msgbuf,
+        0,
+        NULL);
+    if (chars != 0) {
+        /* If there is an \r\n appended, zap it.  */
+        if (chars >= 2
+            && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
+            chars -= 2;
+            msgbuf[chars] = 0;
+        }
+
+        if (chars > sizeof (buf) - 1) {
+            chars = sizeof (buf) - 1;
+            msgbuf[chars] = 0;
+        }
+
+        wcstombs(buf, msgbuf, chars + 1);
+        LocalFree(msgbuf);
+    }
+    else {
+        sprintf(buf, "unknown win32 error (%ld)", error);
+    }
+
+    SetLastError(lasterr);
+    return buf;
+}
+
+#endif /* UNDER_CE */
+
+/* Reset gzip file state */
+local void gz_reset(state)
+    gz_statep state;
+{
+    state->x.have = 0;              /* no output data available */
+    if (state->mode == GZ_READ) {   /* for reading ... */
+        state->eof = 0;             /* not at end of file */
+        state->past = 0;            /* have not read past end yet */
+        state->how = LOOK;          /* look for gzip header */
+    }
+    state->seek = 0;                /* no seek request pending */
+    gz_error(state, Z_OK, NULL);    /* clear error */
+    state->x.pos = 0;               /* no uncompressed data yet */
+    state->strm.avail_in = 0;       /* no input data yet */
+}
+
+/* Open a gzip file either by name or file descriptor. */
+local gzFile gz_open(path, fd, mode)
+    const void *path;
+    int fd;
+    const char *mode;
+{
+    gz_statep state;
+    size_t len;
+    int oflag;
+#ifdef O_CLOEXEC
+    int cloexec = 0;
+#endif
+#ifdef O_EXCL
+    int exclusive = 0;
+#endif
+
+    /* check input */
+    if (path == NULL)
+        return NULL;
+
+    /* allocate gzFile structure to return */
+    state = (gz_statep)malloc(sizeof(gz_state));
+    if (state == NULL)
+        return NULL;
+    state->size = 0;            /* no buffers allocated yet */
+    state->want = GZBUFSIZE;    /* requested buffer size */
+    state->msg = NULL;          /* no error message yet */
+
+    /* interpret mode */
+    state->mode = GZ_NONE;
+    state->level = Z_DEFAULT_COMPRESSION;
+    state->strategy = Z_DEFAULT_STRATEGY;
+    state->direct = 0;
+    while (*mode) {
+        if (*mode >= '0' && *mode <= '9')
+            state->level = *mode - '0';
+        else
+            switch (*mode) {
+            case 'r':
+                state->mode = GZ_READ;
+                break;
+#ifndef NO_GZCOMPRESS
+            case 'w':
+                state->mode = GZ_WRITE;
+                break;
+            case 'a':
+                state->mode = GZ_APPEND;
+                break;
+#endif
+            case '+':       /* can't read and write at the same time */
+                free(state);
+                return NULL;
+            case 'b':       /* ignore -- will request binary anyway */
+                break;
+#ifdef O_CLOEXEC
+            case 'e':
+                cloexec = 1;
+                break;
+#endif
+#ifdef O_EXCL
+            case 'x':
+                exclusive = 1;
+                break;
+#endif
+            case 'f':
+                state->strategy = Z_FILTERED;
+                break;
+            case 'h':
+                state->strategy = Z_HUFFMAN_ONLY;
+                break;
+            case 'R':
+                state->strategy = Z_RLE;
+                break;
+            case 'F':
+                state->strategy = Z_FIXED;
+                break;
+            case 'T':
+                state->direct = 1;
+                break;
+            default:        /* could consider as an error, but just ignore */
+                ;
+            }
+        mode++;
+    }
+
+    /* must provide an "r", "w", or "a" */
+    if (state->mode == GZ_NONE) {
+        free(state);
+        return NULL;
+    }
+
+    /* can't force transparent read */
+    if (state->mode == GZ_READ) {
+        if (state->direct) {
+            free(state);
+            return NULL;
+        }
+        state->direct = 1;      /* for empty file */
+    }
+
+    /* save the path name for error messages */
+#ifdef _WIN32
+    if (fd == -2) {
+        len = wcstombs(NULL, path, 0);
+        if (len == (size_t)-1)
+            len = 0;
+    }
+    else
+#endif
+        len = strlen((const char *)path);
+    state->path = (char *)malloc(len + 1);
+    if (state->path == NULL) {
+        free(state);
+        return NULL;
+    }
+#ifdef _WIN32
+    if (fd == -2)
+        if (len)
+            wcstombs(state->path, path, len + 1);
+        else
+            *(state->path) = 0;
+    else
+#endif
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+        snprintf(state->path, len + 1, "%s", (const char *)path);
+#else
+        strcpy(state->path, path);
+#endif
+
+    /* compute the flags for open() */
+    oflag =
+#ifdef O_LARGEFILE
+        O_LARGEFILE |
+#endif
+#ifdef O_BINARY
+        O_BINARY |
+#endif
+#ifdef O_CLOEXEC
+        (cloexec ? O_CLOEXEC : 0) |
+#endif
+        (state->mode == GZ_READ ?
+         O_RDONLY :
+         (O_WRONLY | O_CREAT |
+#ifdef O_EXCL
+          (exclusive ? O_EXCL : 0) |
+#endif
+          (state->mode == GZ_WRITE ?
+           O_TRUNC :
+           O_APPEND)));
+
+    /* open the file with the appropriate flags (or just use fd) */
+    state->fd = fd > -1 ? fd : (
+#ifdef _WIN32
+        fd == -2 ? _wopen(path, oflag, 0666) :
+#endif
+        open((const char *)path, oflag, 0666));
+    if (state->fd == -1) {
+        free(state->path);
+        free(state);
+        return NULL;
+    }
+    if (state->mode == GZ_APPEND)
+        state->mode = GZ_WRITE;         /* simplify later checks */
+
+    /* save the current position for rewinding (only if reading) */
+    if (state->mode == GZ_READ) {
+        state->start = LSEEK(state->fd, 0, SEEK_CUR);
+        if (state->start == -1) state->start = 0;
+    }
+
+    /* initialize stream */
+    gz_reset(state);
+
+    /* return stream */
+    return (gzFile)state;
+}
+
+/* -- see zlib.h -- */
+gzFile ZEXPORT gzopen(path, mode)
+    const char *path;
+    const char *mode;
+{
+    return gz_open(path, -1, mode);
+}
+
+/* -- see zlib.h -- */
+gzFile ZEXPORT gzopen64(path, mode)
+    const char *path;
+    const char *mode;
+{
+    return gz_open(path, -1, mode);
+}
+
+/* -- see zlib.h -- */
+gzFile ZEXPORT gzdopen(fd, mode)
+    int fd;
+    const char *mode;
+{
+    char *path;         /* identifier for error messages */
+    gzFile gz;
+
+    if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL)
+        return NULL;
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+    snprintf(path, 7 + 3 * sizeof(int), "<fd:%d>", fd); /* for debugging */
+#else
+    sprintf(path, "<fd:%d>", fd);   /* for debugging */
+#endif
+    gz = gz_open(path, fd, mode);
+    free(path);
+    return gz;
+}
+
+/* -- see zlib.h -- */
+#ifdef _WIN32
+gzFile ZEXPORT gzopen_w(path, mode)
+    const wchar_t *path;
+    const char *mode;
+{
+    return gz_open(path, -2, mode);
+}
+#endif
+
+/* -- see zlib.h -- */
+int ZEXPORT gzbuffer(file, size)
+    gzFile file;
+    unsigned size;
+{
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return -1;
+
+    /* make sure we haven't already allocated memory */
+    if (state->size != 0)
+        return -1;
+
+    /* check and set requested size */
+    if (size < 2)
+        size = 2;               /* need two bytes to check magic header */
+    state->want = size;
+    return 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzrewind(file)
+    gzFile file;
+{
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+
+    /* check that we're reading and that there's no error */
+    if (state->mode != GZ_READ ||
+            (state->err != Z_OK && state->err != Z_BUF_ERROR))
+        return -1;
+
+    /* back up and start over */
+    if (LSEEK(state->fd, state->start, SEEK_SET) == -1)
+        return -1;
+    gz_reset(state);
+    return 0;
+}
+
+/* -- see zlib.h -- */
+z_off64_t ZEXPORT gzseek64(file, offset, whence)
+    gzFile file;
+    z_off64_t offset;
+    int whence;
+{
+    unsigned n;
+    z_off64_t ret;
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return -1;
+
+    /* check that there's no error */
+    if (state->err != Z_OK && state->err != Z_BUF_ERROR)
+        return -1;
+
+    /* can only seek from start or relative to current position */
+    if (whence != SEEK_SET && whence != SEEK_CUR)
+        return -1;
+
+    /* normalize offset to a SEEK_CUR specification */
+    if (whence == SEEK_SET)
+        offset -= state->x.pos;
+    else if (state->seek)
+        offset += state->skip;
+    state->seek = 0;
+
+    /* if within raw area while reading, just go there */
+    if (state->mode == GZ_READ && state->how == COPY &&
+            state->x.pos + offset >= 0) {
+        ret = LSEEK(state->fd, offset - state->x.have, SEEK_CUR);
+        if (ret == -1)
+            return -1;
+        state->x.have = 0;
+        state->eof = 0;
+        state->past = 0;
+        state->seek = 0;
+        gz_error(state, Z_OK, NULL);
+        state->strm.avail_in = 0;
+        state->x.pos += offset;
+        return state->x.pos;
+    }
+
+    /* calculate skip amount, rewinding if needed for back seek when reading */
+    if (offset < 0) {
+        if (state->mode != GZ_READ)         /* writing -- can't go backwards */
+            return -1;
+        offset += state->x.pos;
+        if (offset < 0)                     /* before start of file! */
+            return -1;
+        if (gzrewind(file) == -1)           /* rewind, then skip to offset */
+            return -1;
+    }
+
+    /* if reading, skip what's in output buffer (one less gzgetc() check) */
+    if (state->mode == GZ_READ) {
+        n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ?
+            (unsigned)offset : state->x.have;
+        state->x.have -= n;
+        state->x.next += n;
+        state->x.pos += n;
+        offset -= n;
+    }
+
+    /* request skip (if not zero) */
+    if (offset) {
+        state->seek = 1;
+        state->skip = offset;
+    }
+    return state->x.pos + offset;
+}
+
+/* -- see zlib.h -- */
+z_off_t ZEXPORT gzseek(file, offset, whence)
+    gzFile file;
+    z_off_t offset;
+    int whence;
+{
+    z_off64_t ret;
+
+    ret = gzseek64(file, (z_off64_t)offset, whence);
+    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
+}
+
+/* -- see zlib.h -- */
+z_off64_t ZEXPORT gztell64(file)
+    gzFile file;
+{
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return -1;
+
+    /* return position */
+    return state->x.pos + (state->seek ? state->skip : 0);
+}
+
+/* -- see zlib.h -- */
+z_off_t ZEXPORT gztell(file)
+    gzFile file;
+{
+    z_off64_t ret;
+
+    ret = gztell64(file);
+    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
+}
+
+/* -- see zlib.h -- */
+z_off64_t ZEXPORT gzoffset64(file)
+    gzFile file;
+{
+    z_off64_t offset;
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return -1;
+
+    /* compute and return effective offset in file */
+    offset = LSEEK(state->fd, 0, SEEK_CUR);
+    if (offset == -1)
+        return -1;
+    if (state->mode == GZ_READ)             /* reading */
+        offset -= state->strm.avail_in;     /* don't count buffered input */
+    return offset;
+}
+
+/* -- see zlib.h -- */
+z_off_t ZEXPORT gzoffset(file)
+    gzFile file;
+{
+    z_off64_t ret;
+
+    ret = gzoffset64(file);
+    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzeof(file)
+    gzFile file;
+{
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return 0;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return 0;
+
+    /* return end-of-file state */
+    return state->mode == GZ_READ ? state->past : 0;
+}
+
+/* -- see zlib.h -- */
+const char * ZEXPORT gzerror(file, errnum)
+    gzFile file;
+    int *errnum;
+{
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return NULL;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return NULL;
+
+    /* return error information */
+    if (errnum != NULL)
+        *errnum = state->err;
+    return state->err == Z_MEM_ERROR ? "out of memory" :
+                                       (state->msg == NULL ? "" : state->msg);
+}
+
+/* -- see zlib.h -- */
+void ZEXPORT gzclearerr(file)
+    gzFile file;
+{
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return;
+
+    /* clear error and end-of-file */
+    if (state->mode == GZ_READ) {
+        state->eof = 0;
+        state->past = 0;
+    }
+    gz_error(state, Z_OK, NULL);
+}
+
+/* Create an error message in allocated memory and set state->err and
+   state->msg accordingly.  Free any previous error message already there.  Do
+   not try to free or allocate space if the error is Z_MEM_ERROR (out of
+   memory).  Simply save the error message as a static string.  If there is an
+   allocation failure constructing the error message, then convert the error to
+   out of memory. */
+void ZLIB_INTERNAL gz_error(state, err, msg)
+    gz_statep state;
+    int err;
+    const char *msg;
+{
+    /* free previously allocated message and clear */
+    if (state->msg != NULL) {
+        if (state->err != Z_MEM_ERROR)
+            free(state->msg);
+        state->msg = NULL;
+    }
+
+    /* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */
+    if (err != Z_OK && err != Z_BUF_ERROR)
+        state->x.have = 0;
+
+    /* set error code, and if no message, then done */
+    state->err = err;
+    if (msg == NULL)
+        return;
+
+    /* for an out of memory error, return literal string when requested */
+    if (err == Z_MEM_ERROR)
+        return;
+
+    /* construct error message with path */
+    if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) ==
+            NULL) {
+        state->err = Z_MEM_ERROR;
+        return;
+    }
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+    snprintf(state->msg, strlen(state->path) + strlen(msg) + 3,
+             "%s%s%s", state->path, ": ", msg);
+#else
+    strcpy(state->msg, state->path);
+    strcat(state->msg, ": ");
+    strcat(state->msg, msg);
+#endif
+    return;
+}
+
+#ifndef INT_MAX
+/* portably return maximum value for an int (when limits.h presumed not
+   available) -- we need to do this to cover cases where 2's complement not
+   used, since C standard permits 1's complement and sign-bit representations,
+   otherwise we could just use ((unsigned)-1) >> 1 */
+unsigned ZLIB_INTERNAL gz_intmax()
+{
+    unsigned p, q;
+
+    p = 1;
+    do {
+        q = p;
+        p <<= 1;
+        p++;
+    } while (p > q);
+    return q >> 1;
+}
+#endif
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/gzread.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,618 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* gzread.c -- zlib functions for reading gzip files
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* Local functions */
+local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
+local int gz_avail OF((gz_statep));
+local int gz_look OF((gz_statep));
+local int gz_decomp OF((gz_statep));
+local int gz_fetch OF((gz_statep));
+local int gz_skip OF((gz_statep, z_off64_t));
+
+/* Use read() to load a buffer -- return -1 on error, otherwise 0.  Read from
+   state->fd, and update state->eof, state->err, and state->msg as appropriate.
+   This function needs to loop on read(), since read() is not guaranteed to
+   read the number of bytes requested, depending on the type of descriptor. */
+local int gz_load(state, buf, len, have)
+    gz_statep state;
+    unsigned char *buf;
+    unsigned len;
+    unsigned *have;
+{
+    int ret;
+
+    *have = 0;
+    do {
+        ret = read(state->fd, buf + *have, len - *have);
+        if (ret <= 0)
+            break;
+        *have += ret;
+    } while (*have < len);
+    if (ret < 0) {
+        gz_error(state, Z_ERRNO, zstrerror());
+        return -1;
+    }
+    if (ret == 0)
+        state->eof = 1;
+    return 0;
+}
+
+/* Load up input buffer and set eof flag if last data loaded -- return -1 on
+   error, 0 otherwise.  Note that the eof flag is set when the end of the input
+   file is reached, even though there may be unused data in the buffer.  Once
+   that data has been used, no more attempts will be made to read the file.
+   If strm->avail_in != 0, then the current data is moved to the beginning of
+   the input buffer, and then the remainder of the buffer is loaded with the
+   available data from the input file. */
+local int gz_avail(state)
+    gz_statep state;
+{
+    unsigned got;
+    z_streamp strm = &(state->strm);
+
+    if (state->err != Z_OK && state->err != Z_BUF_ERROR)
+        return -1;
+    if (state->eof == 0) {
+        if (strm->avail_in) {       /* copy what's there to the start */
+            unsigned char *p = state->in;
+            unsigned const char *q = strm->next_in;
+            unsigned n = strm->avail_in;
+            do {
+                *p++ = *q++;
+            } while (--n);
+        }
+        if (gz_load(state, state->in + strm->avail_in,
+                    state->size - strm->avail_in, &got) == -1)
+            return -1;
+        strm->avail_in += got;
+        strm->next_in = state->in;
+    }
+    return 0;
+}
+
+/* Look for gzip header, set up for inflate or copy.  state->x.have must be 0.
+   If this is the first time in, allocate required memory.  state->how will be
+   left unchanged if there is no more input data available, will be set to COPY
+   if there is no gzip header and direct copying will be performed, or it will
+   be set to GZIP for decompression.  If direct copying, then leftover input
+   data from the input buffer will be copied to the output buffer.  In that
+   case, all further file reads will be directly to either the output buffer or
+   a user buffer.  If decompressing, the inflate state will be initialized.
+   gz_look() will return 0 on success or -1 on failure. */
+local int gz_look(state)
+    gz_statep state;
+{
+    z_streamp strm = &(state->strm);
+
+    /* allocate read buffers and inflate memory */
+    if (state->size == 0) {
+        /* allocate buffers */
+        state->in = (unsigned char *)malloc(state->want);
+        state->out = (unsigned char *)malloc(state->want << 1);
+        if (state->in == NULL || state->out == NULL) {
+            if (state->out != NULL)
+                free(state->out);
+            if (state->in != NULL)
+                free(state->in);
+            gz_error(state, Z_MEM_ERROR, "out of memory");
+            return -1;
+        }
+        state->size = state->want;
+
+        /* allocate inflate memory */
+        state->strm.zalloc = Z_NULL;
+        state->strm.zfree = Z_NULL;
+        state->strm.opaque = Z_NULL;
+        state->strm.avail_in = 0;
+        state->strm.next_in = Z_NULL;
+        if (inflateInit2(&(state->strm), 15 + 16) != Z_OK) {    /* gunzip */
+            free(state->out);
+            free(state->in);
+            state->size = 0;
+            gz_error(state, Z_MEM_ERROR, "out of memory");
+            return -1;
+        }
+    }
+
+    /* get at least the magic bytes in the input buffer */
+    if (strm->avail_in < 2) {
+        if (gz_avail(state) == -1)
+            return -1;
+        if (strm->avail_in == 0)
+            return 0;
+    }
+
+    /* look for gzip magic bytes -- if there, do gzip decoding (note: there is
+       a logical dilemma here when considering the case of a partially written
+       gzip file, to wit, if a single 31 byte is written, then we cannot tell
+       whether this is a single-byte file, or just a partially written gzip
+       file -- for here we assume that if a gzip file is being written, then
+       the header will be written in a single operation, so that reading a
+       single byte is sufficient indication that it is not a gzip file) */
+    if (strm->avail_in > 1 &&
+            strm->next_in[0] == 31 && strm->next_in[1] == 139) {
+        inflateReset(strm);
+        state->how = GZIP;
+        state->direct = 0;
+        return 0;
+    }
+
+    /* no gzip header -- if we were decoding gzip before, then this is trailing
+       garbage.  Ignore the trailing garbage and finish. */
+    if (state->direct == 0) {
+        strm->avail_in = 0;
+        state->eof = 1;
+        state->x.have = 0;
+        return 0;
+    }
+
+    /* doing raw i/o, copy any leftover input to output -- this assumes that
+       the output buffer is larger than the input buffer, which also assures
+       space for gzungetc() */
+    state->x.next = state->out;
+    if (strm->avail_in) {
+        memcpy(state->x.next, strm->next_in, strm->avail_in);
+        state->x.have = strm->avail_in;
+        strm->avail_in = 0;
+    }
+    state->how = COPY;
+    state->direct = 1;
+    return 0;
+}
+
+/* Decompress from input to the provided next_out and avail_out in the state.
+   On return, state->x.have and state->x.next point to the just decompressed
+   data.  If the gzip stream completes, state->how is reset to LOOK to look for
+   the next gzip stream or raw data, once state->x.have is depleted.  Returns 0
+   on success, -1 on failure. */
+local int gz_decomp(state)
+    gz_statep state;
+{
+    int ret = Z_OK;
+    unsigned had;
+    z_streamp strm = &(state->strm);
+
+    /* fill output buffer up to end of deflate stream */
+    had = strm->avail_out;
+    do {
+        /* get more input for inflate() */
+        if (strm->avail_in == 0 && gz_avail(state) == -1)
+            return -1;
+        if (strm->avail_in == 0) {
+            gz_error(state, Z_BUF_ERROR, "unexpected end of file");
+            break;
+        }
+
+        /* decompress and handle errors */
+        ret = inflate(strm, Z_NO_FLUSH);
+        if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) {
+            gz_error(state, Z_STREAM_ERROR,
+                     "internal error: inflate stream corrupt");
+            return -1;
+        }
+        if (ret == Z_MEM_ERROR) {
+            gz_error(state, Z_MEM_ERROR, "out of memory");
+            return -1;
+        }
+        if (ret == Z_DATA_ERROR) {              /* deflate stream invalid */
+            gz_error(state, Z_DATA_ERROR,
+                     strm->msg == NULL ? "compressed data error" : strm->msg);
+            return -1;
+        }
+    } while (strm->avail_out && ret != Z_STREAM_END);
+
+    /* update available output */
+    state->x.have = had - strm->avail_out;
+    state->x.next = strm->next_out - state->x.have;
+
+    /* if the gzip stream completed successfully, look for another */
+    if (ret == Z_STREAM_END)
+        state->how = LOOK;
+
+    /* good decompression */
+    return 0;
+}
+
+/* Fetch data and put it in the output buffer.  Assumes state->x.have is 0.
+   Data is either copied from the input file or decompressed from the input
+   file depending on state->how.  If state->how is LOOK, then a gzip header is
+   looked for to determine whether to copy or decompress.  Returns -1 on error,
+   otherwise 0.  gz_fetch() will leave state->how as COPY or GZIP unless the
+   end of the input file has been reached and all data has been processed.  */
+local int gz_fetch(state)
+    gz_statep state;
+{
+    z_streamp strm = &(state->strm);
+
+    do {
+        switch(state->how) {
+        case LOOK:      /* -> LOOK, COPY (only if never GZIP), or GZIP */
+            if (gz_look(state) == -1)
+                return -1;
+            if (state->how == LOOK)
+                return 0;
+            break;
+        case COPY:      /* -> COPY */
+            if (gz_load(state, state->out, state->size << 1, &(state->x.have))
+                    == -1)
+                return -1;
+            state->x.next = state->out;
+            return 0;
+        case GZIP:      /* -> GZIP or LOOK (if end of gzip stream) */
+            strm->avail_out = state->size << 1;
+            strm->next_out = state->out;
+            if (gz_decomp(state) == -1)
+                return -1;
+        }
+    } while (state->x.have == 0 && (!state->eof || strm->avail_in));
+    return 0;
+}
+
+/* Skip len uncompressed bytes of output.  Return -1 on error, 0 on success. */
+local int gz_skip(state, len)
+    gz_statep state;
+    z_off64_t len;
+{
+    unsigned n;
+
+    /* skip over len bytes or reach end-of-file, whichever comes first */
+    while (len)
+        /* skip over whatever is in output buffer */
+        if (state->x.have) {
+            n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > len ?
+                (unsigned)len : state->x.have;
+            state->x.have -= n;
+            state->x.next += n;
+            state->x.pos += n;
+            len -= n;
+        }
+
+        /* output buffer empty -- return if we're at the end of the input */
+        else if (state->eof && state->strm.avail_in == 0)
+            break;
+
+        /* need more data to skip -- load up output buffer */
+        else {
+            /* get more output, looking for header if required */
+            if (gz_fetch(state) == -1)
+                return -1;
+        }
+    return 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzread(file, buf, len)
+    gzFile file;
+    voidp buf;
+    unsigned len;
+{
+    unsigned got, n;
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're reading and that there's no (serious) error */
+    if (state->mode != GZ_READ ||
+            (state->err != Z_OK && state->err != Z_BUF_ERROR))
+        return -1;
+
+    /* since an int is returned, make sure len fits in one, otherwise return
+       with an error (this avoids the flaw in the interface) */
+    if ((int)len < 0) {
+        gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
+        return -1;
+    }
+
+    /* if len is zero, avoid unnecessary operations */
+    if (len == 0)
+        return 0;
+
+    /* process a skip request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_skip(state, state->skip) == -1)
+            return -1;
+    }
+
+    /* get len bytes to buf, or less than len if at the end */
+    got = 0;
+    do {
+        /* first just try copying data from the output buffer */
+        if (state->x.have) {
+            n = state->x.have > len ? len : state->x.have;
+            memcpy(buf, state->x.next, n);
+            state->x.next += n;
+            state->x.have -= n;
+        }
+
+        /* output buffer empty -- return if we're at the end of the input */
+        else if (state->eof && strm->avail_in == 0) {
+            state->past = 1;        /* tried to read past end */
+            break;
+        }
+
+        /* need output data -- for small len or new stream load up our output
+           buffer */
+        else if (state->how == LOOK || len < (state->size << 1)) {
+            /* get more output, looking for header if required */
+            if (gz_fetch(state) == -1)
+                return -1;
+            continue;       /* no progress yet -- go back to copy above */
+            /* the copy above assures that we will leave with space in the
+               output buffer, allowing at least one gzungetc() to succeed */
+        }
+
+        /* large len -- read directly into user buffer */
+        else if (state->how == COPY) {      /* read directly */
+            if (gz_load(state, (unsigned char *)buf, len, &n) == -1)
+                return -1;
+        }
+
+        /* large len -- decompress directly into user buffer */
+        else {  /* state->how == GZIP */
+            strm->avail_out = len;
+            strm->next_out = (unsigned char *)buf;
+            if (gz_decomp(state) == -1)
+                return -1;
+            n = state->x.have;
+            state->x.have = 0;
+        }
+
+        /* update progress */
+        len -= n;
+        buf = (char *)buf + n;
+        got += n;
+        state->x.pos += n;
+    } while (len);
+
+    /* return number of bytes read into user buffer (will fit in int) */
+    return (int)got;
+}
+
+/* -- see zlib.h -- */
+#ifdef Z_PREFIX_SET
+#  undef z_gzgetc
+#else
+#  undef gzgetc
+#endif
+int ZEXPORT gzgetc(file)
+    gzFile file;
+{
+    int ret;
+    unsigned char buf[1];
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+
+    /* check that we're reading and that there's no (serious) error */
+    if (state->mode != GZ_READ ||
+        (state->err != Z_OK && state->err != Z_BUF_ERROR))
+        return -1;
+
+    /* try output buffer (no need to check for skip request) */
+    if (state->x.have) {
+        state->x.have--;
+        state->x.pos++;
+        return *(state->x.next)++;
+    }
+
+    /* nothing there -- try gzread() */
+    ret = gzread(file, buf, 1);
+    return ret < 1 ? -1 : buf[0];
+}
+
+int ZEXPORT gzgetc_(file)
+gzFile file;
+{
+    return gzgetc(file);
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzungetc(c, file)
+    int c;
+    gzFile file;
+{
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+
+    /* check that we're reading and that there's no (serious) error */
+    if (state->mode != GZ_READ ||
+        (state->err != Z_OK && state->err != Z_BUF_ERROR))
+        return -1;
+
+    /* process a skip request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_skip(state, state->skip) == -1)
+            return -1;
+    }
+
+    /* can't push EOF */
+    if (c < 0)
+        return -1;
+
+    /* if output buffer empty, put byte at end (allows more pushing) */
+    if (state->x.have == 0) {
+        state->x.have = 1;
+        state->x.next = state->out + (state->size << 1) - 1;
+        state->x.next[0] = c;
+        state->x.pos--;
+        state->past = 0;
+        return c;
+    }
+
+    /* if no room, give up (must have already done a gzungetc()) */
+    if (state->x.have == (state->size << 1)) {
+        gz_error(state, Z_DATA_ERROR, "out of room to push characters");
+        return -1;
+    }
+
+    /* slide output data if needed and insert byte before existing data */
+    if (state->x.next == state->out) {
+        unsigned char *src = state->out + state->x.have;
+        unsigned char *dest = state->out + (state->size << 1);
+        while (src > state->out)
+            *--dest = *--src;
+        state->x.next = dest;
+    }
+    state->x.have++;
+    state->x.next--;
+    state->x.next[0] = c;
+    state->x.pos--;
+    state->past = 0;
+    return c;
+}
+
+/* -- see zlib.h -- */
+char * ZEXPORT gzgets(file, buf, len)
+    gzFile file;
+    char *buf;
+    int len;
+{
+    unsigned left, n;
+    char *str;
+    unsigned char *eol;
+    gz_statep state;
+
+    /* check parameters and get internal structure */
+    if (file == NULL || buf == NULL || len < 1)
+        return NULL;
+    state = (gz_statep)file;
+
+    /* check that we're reading and that there's no (serious) error */
+    if (state->mode != GZ_READ ||
+        (state->err != Z_OK && state->err != Z_BUF_ERROR))
+        return NULL;
+
+    /* process a skip request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_skip(state, state->skip) == -1)
+            return NULL;
+    }
+
+    /* copy output bytes up to new line or len - 1, whichever comes first --
+       append a terminating zero to the string (we don't check for a zero in
+       the contents, let the user worry about that) */
+    str = buf;
+    left = (unsigned)len - 1;
+    if (left) do {
+        /* assure that something is in the output buffer */
+        if (state->x.have == 0 && gz_fetch(state) == -1)
+            return NULL;                /* error */
+        if (state->x.have == 0) {       /* end of file */
+            state->past = 1;            /* read past end */
+            break;                      /* return what we have */
+        }
+
+        /* look for end-of-line in current output buffer */
+        n = state->x.have > left ? left : state->x.have;
+        eol = (unsigned char *)memchr(state->x.next, '\n', n);
+        if (eol != NULL)
+            n = (unsigned)(eol - state->x.next) + 1;
+
+        /* copy through end-of-line, or remainder if not found */
+        memcpy(buf, state->x.next, n);
+        state->x.have -= n;
+        state->x.next += n;
+        state->x.pos += n;
+        left -= n;
+        buf += n;
+    } while (left && eol == NULL);
+
+    /* return terminated string, or if nothing, end of file */
+    if (buf == str)
+        return NULL;
+    buf[0] = 0;
+    return str;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzdirect(file)
+    gzFile file;
+{
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return 0;
+    state = (gz_statep)file;
+
+    /* if the state is not known, but we can find out, then do so (this is
+       mainly for right after a gzopen() or gzdopen()) */
+    if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0)
+        (void)gz_look(state);
+
+    /* return 1 if transparent, 0 if processing a gzip stream */
+    return state->direct;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzclose_r(file)
+    gzFile file;
+{
+    int ret, err;
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+
+    /* check that we're reading */
+    if (state->mode != GZ_READ)
+        return Z_STREAM_ERROR;
+
+    /* free memory and close file */
+    if (state->size) {
+        inflateEnd(&(state->strm));
+        free(state->out);
+        free(state->in);
+    }
+    err = state->err == Z_BUF_ERROR ? Z_BUF_ERROR : Z_OK;
+    gz_error(state, Z_OK, NULL);
+    free(state->path);
+    ret = close(state->fd);
+    free(state);
+    return ret ? Z_ERRNO : err;
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/gzwrite.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,601 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* gzwrite.c -- zlib functions for writing gzip files
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* Local functions */
+local int gz_init OF((gz_statep));
+local int gz_comp OF((gz_statep, int));
+local int gz_zero OF((gz_statep, z_off64_t));
+
+/* Initialize state for writing a gzip file.  Mark initialization by setting
+   state->size to non-zero.  Return -1 on failure or 0 on success. */
+local int gz_init(state)
+    gz_statep state;
+{
+    int ret;
+    z_streamp strm = &(state->strm);
+
+    /* allocate input buffer */
+    state->in = (unsigned char *)malloc(state->want);
+    if (state->in == NULL) {
+        gz_error(state, Z_MEM_ERROR, "out of memory");
+        return -1;
+    }
+
+    /* only need output buffer and deflate state if compressing */
+    if (!state->direct) {
+        /* allocate output buffer */
+        state->out = (unsigned char *)malloc(state->want);
+        if (state->out == NULL) {
+            free(state->in);
+            gz_error(state, Z_MEM_ERROR, "out of memory");
+            return -1;
+        }
+
+        /* allocate deflate memory, set up for gzip compression */
+        strm->zalloc = Z_NULL;
+        strm->zfree = Z_NULL;
+        strm->opaque = Z_NULL;
+        ret = deflateInit2(strm, state->level, Z_DEFLATED,
+                           MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy);
+        if (ret != Z_OK) {
+            free(state->out);
+            free(state->in);
+            gz_error(state, Z_MEM_ERROR, "out of memory");
+            return -1;
+        }
+    }
+
+    /* mark state as initialized */
+    state->size = state->want;
+
+    /* initialize write buffer if compressing */
+    if (!state->direct) {
+        strm->avail_out = state->size;
+        strm->next_out = state->out;
+        state->x.next = strm->next_out;
+    }
+    return 0;
+}
+
+/* Compress whatever is at avail_in and next_in and write to the output file.
+   Return -1 if there is an error writing to the output file, otherwise 0.
+   flush is assumed to be a valid deflate() flush value.  If flush is Z_FINISH,
+   then the deflate() state is reset to start a new gzip stream.  If gz->direct
+   is true, then simply write to the output file without compressing, and
+   ignore flush. */
+local int gz_comp(state, flush)
+    gz_statep state;
+    int flush;
+{
+    int ret, got;
+    unsigned have;
+    z_streamp strm = &(state->strm);
+
+    /* allocate memory if this is the first time through */
+    if (state->size == 0 && gz_init(state) == -1)
+        return -1;
+
+    /* write directly if requested */
+    if (state->direct) {
+        got = write(state->fd, strm->next_in, strm->avail_in);
+        if (got < 0 || (unsigned)got != strm->avail_in) {
+            gz_error(state, Z_ERRNO, zstrerror());
+            return -1;
+        }
+        strm->avail_in = 0;
+        return 0;
+    }
+
+    /* run deflate() on provided input until it produces no more output */
+    ret = Z_OK;
+    do {
+        /* write out current buffer contents if full, or if flushing, but if
+           doing Z_FINISH then don't write until we get to Z_STREAM_END */
+        if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
+            (flush != Z_FINISH || ret == Z_STREAM_END))) {
+            have = (unsigned)(strm->next_out - state->x.next);
+            if (have && ((got = write(state->fd, state->x.next, have)) < 0 ||
+                         (unsigned)got != have)) {
+                gz_error(state, Z_ERRNO, zstrerror());
+                return -1;
+            }
+            if (strm->avail_out == 0) {
+                strm->avail_out = state->size;
+                strm->next_out = state->out;
+            }
+            state->x.next = strm->next_out;
+        }
+
+        /* compress */
+        have = strm->avail_out;
+        ret = deflate(strm, flush);
+        if (ret == Z_STREAM_ERROR) {
+            gz_error(state, Z_STREAM_ERROR,
+                      "internal error: deflate stream corrupt");
+            return -1;
+        }
+        have -= strm->avail_out;
+    } while (have);
+
+    /* if that completed a deflate stream, allow another to start */
+    if (flush == Z_FINISH)
+        deflateReset(strm);
+
+    /* all done, no errors */
+    return 0;
+}
+
+/* Compress len zeros to output.  Return -1 on error, 0 on success. */
+local int gz_zero(state, len)
+    gz_statep state;
+    z_off64_t len;
+{
+    int first;
+    unsigned n;
+    z_streamp strm = &(state->strm);
+
+    /* consume whatever's left in the input buffer */
+    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+        return -1;
+
+    /* compress len zeros (len guaranteed > 0) */
+    first = 1;
+    while (len) {
+        n = GT_OFF(state->size) || (z_off64_t)state->size > len ?
+            (unsigned)len : state->size;
+        if (first) {
+            memset(state->in, 0, n);
+            first = 0;
+        }
+        strm->avail_in = n;
+        strm->next_in = state->in;
+        state->x.pos += n;
+        if (gz_comp(state, Z_NO_FLUSH) == -1)
+            return -1;
+        len -= n;
+    }
+    return 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzwrite(file, buf, len)
+    gzFile file;
+    voidpc buf;
+    unsigned len;
+{
+    unsigned put = len;
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return 0;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return 0;
+
+    /* since an int is returned, make sure len fits in one, otherwise return
+       with an error (this avoids the flaw in the interface) */
+    if ((int)len < 0) {
+        gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
+        return 0;
+    }
+
+    /* if len is zero, avoid unnecessary operations */
+    if (len == 0)
+        return 0;
+
+    /* allocate memory if this is the first time through */
+    if (state->size == 0 && gz_init(state) == -1)
+        return 0;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return 0;
+    }
+
+    /* for small len, copy to input buffer, otherwise compress directly */
+    if (len < state->size) {
+        /* copy to input buffer, compress when full */
+        do {
+            unsigned have, copy;
+
+            if (strm->avail_in == 0)
+                strm->next_in = state->in;
+            have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
+            copy = state->size - have;
+            if (copy > len)
+                copy = len;
+            memcpy(state->in + have, buf, copy);
+            strm->avail_in += copy;
+            state->x.pos += copy;
+            buf = (const char *)buf + copy;
+            len -= copy;
+            if (len && gz_comp(state, Z_NO_FLUSH) == -1)
+                return 0;
+        } while (len);
+    }
+    else {
+        /* consume whatever's left in the input buffer */
+        if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+            return 0;
+
+        /* directly compress user buffer to file */
+        strm->avail_in = len;
+        strm->next_in = (z_const Bytef *)buf;
+        state->x.pos += len;
+        if (gz_comp(state, Z_NO_FLUSH) == -1)
+            return 0;
+    }
+
+    /* input was all buffered or compressed (put will fit in int) */
+    return (int)put;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzputc(file, c)
+    gzFile file;
+    int c;
+{
+    unsigned have;
+    unsigned char buf[1];
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return -1;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return -1;
+    }
+
+    /* try writing to input buffer for speed (state->size == 0 if buffer not
+       initialized) */
+    if (state->size) {
+        if (strm->avail_in == 0)
+            strm->next_in = state->in;
+        have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
+        if (have < state->size) {
+            state->in[have] = c;
+            strm->avail_in++;
+            state->x.pos++;
+            return c & 0xff;
+        }
+    }
+
+    /* no room in buffer or not initialized, use gz_write() */
+    buf[0] = c;
+    if (gzwrite(file, buf, 1) != 1)
+        return -1;
+    return c & 0xff;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzputs(file, str)
+    gzFile file;
+    const char *str;
+{
+    int ret;
+    unsigned len;
+
+    /* write string */
+    len = (unsigned)strlen(str);
+    ret = gzwrite(file, str, len);
+    return ret == 0 && len != 0 ? -1 : ret;
+}
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#include <stdarg.h>
+
+/* -- see zlib.h -- */
+int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va)
+{
+    int size, len;
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return 0;
+
+    /* make sure we have some buffer space */
+    if (state->size == 0 && gz_init(state) == -1)
+        return 0;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return 0;
+    }
+
+    /* consume whatever's left in the input buffer */
+    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+        return 0;
+
+    /* do the printf() into the input buffer, put length in len */
+    size = (int)(state->size);
+    state->in[size - 1] = 0;
+#ifdef NO_vsnprintf
+#  ifdef HAS_vsprintf_void
+    (void)vsprintf((char *)(state->in), format, va);
+    for (len = 0; len < size; len++)
+        if (state->in[len] == 0) break;
+#  else
+    len = vsprintf((char *)(state->in), format, va);
+#  endif
+#else
+#  ifdef HAS_vsnprintf_void
+    (void)vsnprintf((char *)(state->in), size, format, va);
+    len = strlen((char *)(state->in));
+#  else
+    len = vsnprintf((char *)(state->in), size, format, va);
+#  endif
+#endif
+
+    /* check that printf() results fit in buffer */
+    if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
+        return 0;
+
+    /* update buffer and position, defer compression until needed */
+    strm->avail_in = (unsigned)len;
+    strm->next_in = state->in;
+    state->x.pos += len;
+    return len;
+}
+
+int ZEXPORTVA gzprintf(gzFile file, const char *format, ...)
+{
+    va_list va;
+    int ret;
+
+    va_start(va, format);
+    ret = gzvprintf(file, format, va);
+    va_end(va);
+    return ret;
+}
+
+#else /* !STDC && !Z_HAVE_STDARG_H */
+
+/* -- see zlib.h -- */
+int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+                       a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
+    gzFile file;
+    const char *format;
+    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+        a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
+{
+    int size, len;
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that can really pass pointer in ints */
+    if (sizeof(int) != sizeof(void *))
+        return 0;
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return 0;
+
+    /* make sure we have some buffer space */
+    if (state->size == 0 && gz_init(state) == -1)
+        return 0;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return 0;
+    }
+
+    /* consume whatever's left in the input buffer */
+    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+        return 0;
+
+    /* do the printf() into the input buffer, put length in len */
+    size = (int)(state->size);
+    state->in[size - 1] = 0;
+#ifdef NO_snprintf
+#  ifdef HAS_sprintf_void
+    sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
+            a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+    for (len = 0; len < size; len++)
+        if (state->in[len] == 0) break;
+#  else
+    len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
+                  a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#  endif
+#else
+#  ifdef HAS_snprintf_void
+    snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8,
+             a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+    len = strlen((char *)(state->in));
+#  else
+    len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6,
+                   a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18,
+                   a19, a20);
+#  endif
+#endif
+
+    /* check that printf() results fit in buffer */
+    if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
+        return 0;
+
+    /* update buffer and position, defer compression until needed */
+    strm->avail_in = (unsigned)len;
+    strm->next_in = state->in;
+    state->x.pos += len;
+    return len;
+}
+
+#endif
+
+/* -- see zlib.h -- */
+int ZEXPORT gzflush(file, flush)
+    gzFile file;
+    int flush;
+{
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return Z_STREAM_ERROR;
+
+    /* check flush parameter */
+    if (flush < 0 || flush > Z_FINISH)
+        return Z_STREAM_ERROR;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return -1;
+    }
+
+    /* compress remaining data with requested flush */
+    gz_comp(state, flush);
+    return state->err;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzsetparams(file, level, strategy)
+    gzFile file;
+    int level;
+    int strategy;
+{
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return Z_STREAM_ERROR;
+
+    /* if no change is requested, then do nothing */
+    if (level == state->level && strategy == state->strategy)
+        return Z_OK;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return -1;
+    }
+
+    /* change compression parameters for subsequent input */
+    if (state->size) {
+        /* flush previous input with previous parameters before changing */
+        if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
+            return state->err;
+        deflateParams(strm, level, strategy);
+    }
+    state->level = level;
+    state->strategy = strategy;
+    return Z_OK;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzclose_w(file)
+    gzFile file;
+{
+    int ret = Z_OK;
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+
+    /* check that we're writing */
+    if (state->mode != GZ_WRITE)
+        return Z_STREAM_ERROR;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            ret = state->err;
+    }
+
+    /* flush, free memory, and close file */
+    if (gz_comp(state, Z_FINISH) == -1)
+        ret = state->err;
+    if (state->size) {
+        if (!state->direct) {
+            (void)deflateEnd(&(state->strm));
+            free(state->out);
+        }
+        free(state->in);
+    }
+    gz_error(state, Z_OK, NULL);
+    free(state->path);
+    if (close(state->fd) == -1)
+        ret = Z_ERRNO;
+    free(state);
+    return ret;
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/infback.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,664 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* infback.c -- inflate using a call-back interface
+ * Copyright (C) 1995-2011 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+   This code is largely copied from inflate.c.  Normally either infback.o or
+   inflate.o would be linked into an application--not both.  The interface
+   with inffast.c is retained so that optimized assembler-coded versions of
+   inflate_fast() can be used with either inflate.c or infback.c.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* function prototypes */
+local void fixedtables OF((struct inflate_state FAR *state));
+
+/*
+   strm provides memory allocation functions in zalloc and zfree, or
+   Z_NULL to use the library memory allocation functions.
+
+   windowBits is in the range 8..15, and window is a user-supplied
+   window and output buffer that is 2**windowBits bytes.
+ */
+int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size)
+z_streamp strm;
+int windowBits;
+unsigned char FAR *window;
+const char *version;
+int stream_size;
+{
+    struct inflate_state FAR *state;
+
+    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+        stream_size != (int)(sizeof(z_stream)))
+        return Z_VERSION_ERROR;
+    if (strm == Z_NULL || window == Z_NULL ||
+        windowBits < 8 || windowBits > 15)
+        return Z_STREAM_ERROR;
+    strm->msg = Z_NULL;                 /* in case we return an error */
+    if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zalloc = zcalloc;
+        strm->opaque = (voidpf)0;
+#endif
+    }
+    if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+    strm->zfree = zcfree;
+#endif
+    state = (struct inflate_state FAR *)ZALLOC(strm, 1,
+                                               sizeof(struct inflate_state));
+    if (state == Z_NULL) return Z_MEM_ERROR;
+    Tracev((stderr, "inflate: allocated\n"));
+    strm->state = (struct internal_state FAR *)state;
+    state->dmax = 32768U;
+    state->wbits = windowBits;
+    state->wsize = 1U << windowBits;
+    state->window = window;
+    state->wnext = 0;
+    state->whave = 0;
+    return Z_OK;
+}
+
+/*
+   Return state with length and distance decoding tables and index sizes set to
+   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
+   If BUILDFIXED is defined, then instead this routine builds the tables the
+   first time it's called, and returns those tables the first time and
+   thereafter.  This reduces the size of the code by about 2K bytes, in
+   exchange for a little execution time.  However, BUILDFIXED should not be
+   used for threaded applications, since the rewriting of the tables and virgin
+   may not be thread-safe.
+ */
+local void fixedtables(state)
+struct inflate_state FAR *state;
+{
+#ifdef BUILDFIXED
+    static int virgin = 1;
+    static code *lenfix, *distfix;
+    static code fixed[544];
+
+    /* build fixed huffman tables if first call (may not be thread safe) */
+    if (virgin) {
+        unsigned sym, bits;
+        static code *next;
+
+        /* literal/length table */
+        sym = 0;
+        while (sym < 144) state->lens[sym++] = 8;
+        while (sym < 256) state->lens[sym++] = 9;
+        while (sym < 280) state->lens[sym++] = 7;
+        while (sym < 288) state->lens[sym++] = 8;
+        next = fixed;
+        lenfix = next;
+        bits = 9;
+        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+        /* distance table */
+        sym = 0;
+        while (sym < 32) state->lens[sym++] = 5;
+        distfix = next;
+        bits = 5;
+        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+        /* do this just once */
+        virgin = 0;
+    }
+#else /* !BUILDFIXED */
+#   include "inffixed.h"
+#endif /* BUILDFIXED */
+    state->lencode = lenfix;
+    state->lenbits = 9;
+    state->distcode = distfix;
+    state->distbits = 5;
+}
+
+/* Macros for inflateBack(): */
+
+/* Load returned state from inflate_fast() */
+#define LOAD() \
+    do { \
+        put = strm->next_out; \
+        left = strm->avail_out; \
+        next = strm->next_in; \
+        have = strm->avail_in; \
+        hold = state->hold; \
+        bits = state->bits; \
+    } while (0)
+
+/* Set state from registers for inflate_fast() */
+#define RESTORE() \
+    do { \
+        strm->next_out = put; \
+        strm->avail_out = left; \
+        strm->next_in = next; \
+        strm->avail_in = have; \
+        state->hold = hold; \
+        state->bits = bits; \
+    } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+    do { \
+        hold = 0; \
+        bits = 0; \
+    } while (0)
+
+/* Assure that some input is available.  If input is requested, but denied,
+   then return a Z_BUF_ERROR from inflateBack(). */
+#define PULL() \
+    do { \
+        if (have == 0) { \
+            have = in(in_desc, &next); \
+            if (have == 0) { \
+                next = Z_NULL; \
+                ret = Z_BUF_ERROR; \
+                goto inf_leave; \
+            } \
+        } \
+    } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflateBack()
+   with an error if there is no input available. */
+#define PULLBYTE() \
+    do { \
+        PULL(); \
+        have--; \
+        hold += (unsigned long)(*next++) << bits; \
+        bits += 8; \
+    } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator.  If there is
+   not enough available input to do that, then return from inflateBack() with
+   an error. */
+#define NEEDBITS(n) \
+    do { \
+        while (bits < (unsigned)(n)) \
+            PULLBYTE(); \
+    } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+    ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+    do { \
+        hold >>= (n); \
+        bits -= (unsigned)(n); \
+    } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+    do { \
+        hold >>= bits & 7; \
+        bits -= bits & 7; \
+    } while (0)
+
+/* Assure that some output space is available, by writing out the window
+   if it's full.  If the write fails, return from inflateBack() with a
+   Z_BUF_ERROR. */
+#define ROOM() \
+    do { \
+        if (left == 0) { \
+            put = state->window; \
+            left = state->wsize; \
+            state->whave = left; \
+            if (out(out_desc, put, left)) { \
+                ret = Z_BUF_ERROR; \
+                goto inf_leave; \
+            } \
+        } \
+    } while (0)
+
+/*
+   strm provides the memory allocation functions and window buffer on input,
+   and provides information on the unused input on return.  For Z_DATA_ERROR
+   returns, strm will also provide an error message.
+
+   in() and out() are the call-back input and output functions.  When
+   inflateBack() needs more input, it calls in().  When inflateBack() has
+   filled the window with output, or when it completes with data in the
+   window, it calls out() to write out the data.  The application must not
+   change the provided input until in() is called again or inflateBack()
+   returns.  The application must not change the window/output buffer until
+   inflateBack() returns.
+
+   in() and out() are called with a descriptor parameter provided in the
+   inflateBack() call.  This parameter can be a structure that provides the
+   information required to do the read or write, as well as accumulated
+   information on the input and output such as totals and check values.
+
+   in() should return zero on failure.  out() should return non-zero on
+   failure.  If either in() or out() fails, than inflateBack() returns a
+   Z_BUF_ERROR.  strm->next_in can be checked for Z_NULL to see whether it
+   was in() or out() that caused in the error.  Otherwise,  inflateBack()
+   returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
+   error, or Z_MEM_ERROR if it could not allocate memory for the state.
+   inflateBack() can also return Z_STREAM_ERROR if the input parameters
+   are not correct, i.e. strm is Z_NULL or the state was not initialized.
+ */
+int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc)
+z_streamp strm;
+in_func in;
+void FAR *in_desc;
+out_func out;
+void FAR *out_desc;
+{
+    struct inflate_state FAR *state;
+    z_const unsigned char FAR *next;    /* next input */
+    unsigned char FAR *put;     /* next output */
+    unsigned have, left;        /* available input and output */
+    unsigned long hold;         /* bit buffer */
+    unsigned bits;              /* bits in bit buffer */
+    unsigned copy;              /* number of stored or match bytes to copy */
+    unsigned char FAR *from;    /* where to copy match bytes from */
+    code here;                  /* current decoding table entry */
+    code last;                  /* parent table entry */
+    unsigned len;               /* length to copy for repeats, bits to drop */
+    int ret;                    /* return code */
+    static const unsigned short order[19] = /* permutation of code lengths */
+        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+    /* Check that the strm exists and that the state was initialized */
+    if (strm == Z_NULL || strm->state == Z_NULL)
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* Reset the state */
+    strm->msg = Z_NULL;
+    state->mode = TYPE;
+    state->last = 0;
+    state->whave = 0;
+    next = strm->next_in;
+    have = next != Z_NULL ? strm->avail_in : 0;
+    hold = 0;
+    bits = 0;
+    put = state->window;
+    left = state->wsize;
+
+    /* Inflate until end of block marked as last */
+    for (;;)
+        switch (state->mode) {
+        case TYPE:
+            /* determine and dispatch block type */
+            if (state->last) {
+                BYTEBITS();
+                state->mode = DONE;
+                break;
+            }
+            NEEDBITS(3);
+            state->last = BITS(1);
+            DROPBITS(1);
+            switch (BITS(2)) {
+            case 0:                             /* stored block */
+                Tracev((stderr, "inflate:     stored block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = STORED;
+                break;
+            case 1:                             /* fixed block */
+                fixedtables(state);
+                Tracev((stderr, "inflate:     fixed codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = LEN;              /* decode codes */
+                break;
+            case 2:                             /* dynamic block */
+                Tracev((stderr, "inflate:     dynamic codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = TABLE;
+                break;
+            case 3:
+                strm->msg = (char *)"invalid block type";
+                state->mode = BAD;
+            }
+            DROPBITS(2);
+            break;
+
+        case STORED:
+            /* get and verify stored block length */
+            BYTEBITS();                         /* go to byte boundary */
+            NEEDBITS(32);
+            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+                strm->msg = (char *)"invalid stored block lengths";
+                state->mode = BAD;
+                break;
+            }
+            state->length = (unsigned)hold & 0xffff;
+            Tracev((stderr, "inflate:       stored length %u\n",
+                    state->length));
+            INITBITS();
+
+            /* copy stored block from input to output */
+            while (state->length != 0) {
+                copy = state->length;
+                PULL();
+                ROOM();
+                if (copy > have) copy = have;
+                if (copy > left) copy = left;
+                zmemcpy(put, next, copy);
+                have -= copy;
+                next += copy;
+                left -= copy;
+                put += copy;
+                state->length -= copy;
+            }
+            Tracev((stderr, "inflate:       stored end\n"));
+            state->mode = TYPE;
+            break;
+
+        case TABLE:
+            /* get dynamic table entries descriptor */
+            NEEDBITS(14);
+            state->nlen = BITS(5) + 257;
+            DROPBITS(5);
+            state->ndist = BITS(5) + 1;
+            DROPBITS(5);
+            state->ncode = BITS(4) + 4;
+            DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+            if (state->nlen > 286 || state->ndist > 30) {
+                strm->msg = (char *)"too many length or distance symbols";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracev((stderr, "inflate:       table sizes ok\n"));
+
+            /* get code length code lengths (not a typo) */
+            state->have = 0;
+            while (state->have < state->ncode) {
+                NEEDBITS(3);
+                state->lens[order[state->have++]] = (unsigned short)BITS(3);
+                DROPBITS(3);
+            }
+            while (state->have < 19)
+                state->lens[order[state->have++]] = 0;
+            state->next = state->codes;
+            state->lencode = (code const FAR *)(state->next);
+            state->lenbits = 7;
+            ret = inflate_table(CODES, state->lens, 19, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid code lengths set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       code lengths ok\n"));
+
+            /* get length and distance code code lengths */
+            state->have = 0;
+            while (state->have < state->nlen + state->ndist) {
+                for (;;) {
+                    here = state->lencode[BITS(state->lenbits)];
+                    if ((unsigned)(here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                if (here.val < 16) {
+                    DROPBITS(here.bits);
+                    state->lens[state->have++] = here.val;
+                }
+                else {
+                    if (here.val == 16) {
+                        NEEDBITS(here.bits + 2);
+                        DROPBITS(here.bits);
+                        if (state->have == 0) {
+                            strm->msg = (char *)"invalid bit length repeat";
+                            state->mode = BAD;
+                            break;
+                        }
+                        len = (unsigned)(state->lens[state->have - 1]);
+                        copy = 3 + BITS(2);
+                        DROPBITS(2);
+                    }
+                    else if (here.val == 17) {
+                        NEEDBITS(here.bits + 3);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 3 + BITS(3);
+                        DROPBITS(3);
+                    }
+                    else {
+                        NEEDBITS(here.bits + 7);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 11 + BITS(7);
+                        DROPBITS(7);
+                    }
+                    if (state->have + copy > state->nlen + state->ndist) {
+                        strm->msg = (char *)"invalid bit length repeat";
+                        state->mode = BAD;
+                        break;
+                    }
+                    while (copy--)
+                        state->lens[state->have++] = (unsigned short)len;
+                }
+            }
+
+            /* handle error breaks in while */
+            if (state->mode == BAD) break;
+
+            /* check for end-of-block code (better have one) */
+            if (state->lens[256] == 0) {
+                strm->msg = (char *)"invalid code -- missing end-of-block";
+                state->mode = BAD;
+                break;
+            }
+
+            /* build code tables -- note: do not change the lenbits or distbits
+               values here (9 and 6) without reading the comments in inftrees.h
+               concerning the ENOUGH constants, which depend on those values */
+            state->next = state->codes;
+            state->lencode = (code const FAR *)(state->next);
+            state->lenbits = 9;
+            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid literal/lengths set";
+                state->mode = BAD;
+                break;
+            }
+            state->distcode = (code const FAR *)(state->next);
+            state->distbits = 6;
+            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+                            &(state->next), &(state->distbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid distances set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       codes ok\n"));
+            state->mode = LEN;
+
+        case LEN:
+            /* use inflate_fast() if we have enough input and output */
+            if (have >= 6 && left >= 258) {
+                RESTORE();
+                if (state->whave < state->wsize)
+                    state->whave = state->wsize - left;
+                inflate_fast(strm, state->wsize);
+                LOAD();
+                break;
+            }
+
+            /* get a literal, length, or end-of-block code */
+            for (;;) {
+                here = state->lencode[BITS(state->lenbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if (here.op && (here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->lencode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+            }
+            DROPBITS(here.bits);
+            state->length = (unsigned)here.val;
+
+            /* process literal */
+            if (here.op == 0) {
+                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                        "inflate:         literal '%c'\n" :
+                        "inflate:         literal 0x%02x\n", here.val));
+                ROOM();
+                *put++ = (unsigned char)(state->length);
+                left--;
+                state->mode = LEN;
+                break;
+            }
+
+            /* process end of block */
+            if (here.op & 32) {
+                Tracevv((stderr, "inflate:         end of block\n"));
+                state->mode = TYPE;
+                break;
+            }
+
+            /* invalid code */
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid literal/length code";
+                state->mode = BAD;
+                break;
+            }
+
+            /* length code -- get extra bits, if any */
+            state->extra = (unsigned)(here.op) & 15;
+            if (state->extra != 0) {
+                NEEDBITS(state->extra);
+                state->length += BITS(state->extra);
+                DROPBITS(state->extra);
+            }
+            Tracevv((stderr, "inflate:         length %u\n", state->length));
+
+            /* get distance code */
+            for (;;) {
+                here = state->distcode[BITS(state->distbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if ((here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->distcode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+            }
+            DROPBITS(here.bits);
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+            state->offset = (unsigned)here.val;
+
+            /* get distance extra bits, if any */
+            state->extra = (unsigned)(here.op) & 15;
+            if (state->extra != 0) {
+                NEEDBITS(state->extra);
+                state->offset += BITS(state->extra);
+                DROPBITS(state->extra);
+            }
+            if (state->offset > state->wsize - (state->whave < state->wsize ?
+                                                left : 0)) {
+                strm->msg = (char *)"invalid distance too far back";
+                state->mode = BAD;
+                break;
+            }
+            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
+
+            /* copy match from window to output */
+            do {
+                ROOM();
+                copy = state->wsize - state->offset;
+                if (copy < left) {
+                    from = put + copy;
+                    copy = left - copy;
+                }
+                else {
+                    from = put - state->offset;
+                    copy = left;
+                }
+                if (copy > state->length) copy = state->length;
+                state->length -= copy;
+                left -= copy;
+                do {
+                    *put++ = *from++;
+                } while (--copy);
+            } while (state->length != 0);
+            break;
+
+        case DONE:
+            /* inflate stream terminated properly -- write leftover output */
+            ret = Z_STREAM_END;
+            if (left < state->wsize) {
+                if (out(out_desc, state->window, state->wsize - left))
+                    ret = Z_BUF_ERROR;
+            }
+            goto inf_leave;
+
+        case BAD:
+            ret = Z_DATA_ERROR;
+            goto inf_leave;
+
+        default:                /* can't happen, but makes compilers happy */
+            ret = Z_STREAM_ERROR;
+            goto inf_leave;
+        }
+
+    /* Return unused input */
+  inf_leave:
+    strm->next_in = next;
+    strm->avail_in = have;
+    return ret;
+}
+
+int ZEXPORT inflateBackEnd(strm)
+z_streamp strm;
+{
+    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+        return Z_STREAM_ERROR;
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+    Tracev((stderr, "inflate: end\n"));
+    return Z_OK;
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/inffast.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,364 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2008, 2010, 2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifndef ASMINF
+
+/* Allow machine dependent optimization for post-increment or pre-increment.
+   Based on testing to date,
+   Pre-increment preferred for:
+   - PowerPC G3 (Adler)
+   - MIPS R5000 (Randers-Pehrson)
+   Post-increment preferred for:
+   - none
+   No measurable difference:
+   - Pentium III (Anderson)
+   - M68060 (Nikl)
+ */
+#ifdef POSTINC
+#  define OFF 0
+#  define PUP(a) *(a)++
+#else
+#  define OFF 1
+#  define PUP(a) *++(a)
+#endif
+
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate execution time is spent in this routine.
+
+   Entry assumptions:
+
+        state->mode == LEN
+        strm->avail_in >= 6
+        strm->avail_out >= 258
+        start >= strm->avail_out
+        state->bits < 8
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      output space.
+ */
+void ZLIB_INTERNAL inflate_fast(strm, start)
+z_streamp strm;
+unsigned start;         /* inflate()'s starting value for strm->avail_out */
+{
+    struct inflate_state FAR *state;
+    z_const unsigned char FAR *in;      /* local strm->next_in */
+    z_const unsigned char FAR *last;    /* have enough input while in < last */
+    unsigned char FAR *out;     /* local strm->next_out */
+    unsigned char FAR *beg;     /* inflate()'s initial strm->next_out */
+    unsigned char FAR *end;     /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+    unsigned dmax;              /* maximum distance from zlib header */
+#endif
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned wnext;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if wsize != 0 */
+    unsigned long hold;         /* local strm->hold */
+    unsigned bits;              /* local strm->bits */
+    code const FAR *lcode;      /* local strm->lencode */
+    code const FAR *dcode;      /* local strm->distcode */
+    unsigned lmask;             /* mask for first level of length codes */
+    unsigned dmask;             /* mask for first level of distance codes */
+    code here;                  /* retrieved table entry */
+    unsigned op;                /* code bits, operation, extra bits, or */
+                                /*  window position, window bytes to copy */
+    unsigned len;               /* match length, unused bytes */
+    unsigned dist;              /* match distance */
+    unsigned char FAR *from;    /* where to copy match from */
+
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+    in = strm->next_in - OFF;
+    last = in + (strm->avail_in - 5);
+    out = strm->next_out - OFF;
+    beg = out - (start - strm->avail_out);
+    end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+    dmax = state->dmax;
+#endif
+    wsize = state->wsize;
+    whave = state->whave;
+    wnext = state->wnext;
+    window = state->window;
+    hold = state->hold;
+    bits = state->bits;
+    lcode = state->lencode;
+    dcode = state->distcode;
+    lmask = (1U << state->lenbits) - 1;
+    dmask = (1U << state->distbits) - 1;
+
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
+    do {
+        if (bits < 15) {
+            hold += (unsigned long)(PUP(in)) << bits;
+            bits += 8;
+            hold += (unsigned long)(PUP(in)) << bits;
+            bits += 8;
+        }
+        here = lcode[hold & lmask];
+      dolen:
+        op = (unsigned)(here.bits);
+        hold >>= op;
+        bits -= op;
+        op = (unsigned)(here.op);
+        if (op == 0) {                          /* literal */
+            Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                    "inflate:         literal '%c'\n" :
+                    "inflate:         literal 0x%02x\n", here.val));
+            PUP(out) = (unsigned char)(here.val);
+        }
+        else if (op & 16) {                     /* length base */
+            len = (unsigned)(here.val);
+            op &= 15;                           /* number of extra bits */
+            if (op) {
+                if (bits < op) {
+                    hold += (unsigned long)(PUP(in)) << bits;
+                    bits += 8;
+                }
+                len += (unsigned)hold & ((1U << op) - 1);
+                hold >>= op;
+                bits -= op;
+            }
+            Tracevv((stderr, "inflate:         length %u\n", len));
+            if (bits < 15) {
+                hold += (unsigned long)(PUP(in)) << bits;
+                bits += 8;
+                hold += (unsigned long)(PUP(in)) << bits;
+                bits += 8;
+            }
+            here = dcode[hold & dmask];
+          dodist:
+            op = (unsigned)(here.bits);
+            hold >>= op;
+            bits -= op;
+            op = (unsigned)(here.op);
+            if (op & 16) {                      /* distance base */
+                dist = (unsigned)(here.val);
+                op &= 15;                       /* number of extra bits */
+                if (bits < op) {
+                    hold += (unsigned long)(PUP(in)) << bits;
+                    bits += 8;
+                    if (bits < op) {
+                        hold += (unsigned long)(PUP(in)) << bits;
+                        bits += 8;
+                    }
+                }
+                dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+                if (dist > dmax) {
+                    strm->msg = (char *)"invalid distance too far back";
+                    state->mode = BAD;
+                    break;
+                }
+#endif
+                hold >>= op;
+                bits -= op;
+                Tracevv((stderr, "inflate:         distance %u\n", dist));
+                op = (unsigned)(out - beg);     /* max distance in output */
+                if (dist > op) {                /* see if copy from window */
+                    op = dist - op;             /* distance back in window */
+                    if (op > whave) {
+                        if (state->sane) {
+                            strm->msg =
+                                (char *)"invalid distance too far back";
+                            state->mode = BAD;
+                            break;
+                        }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+                        if (len <= op - whave) {
+                            do {
+                                PUP(out) = 0;
+                            } while (--len);
+                            continue;
+                        }
+                        len -= op - whave;
+                        do {
+                            PUP(out) = 0;
+                        } while (--op > whave);
+                        if (op == 0) {
+                            from = out - dist;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--len);
+                            continue;
+                        }
+#endif
+                    }
+                    from = window - OFF;
+                    if (wnext == 0) {           /* very common case */
+                        from += wsize - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    else if (wnext < op) {      /* wrap around window */
+                        from += wsize + wnext - op;
+                        op -= wnext;
+                        if (op < len) {         /* some from end of window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = window - OFF;
+                            if (wnext < len) {  /* some from start of window */
+                                op = wnext;
+                                len -= op;
+                                do {
+                                    PUP(out) = PUP(from);
+                                } while (--op);
+                                from = out - dist;      /* rest from output */
+                            }
+                        }
+                    }
+                    else {                      /* contiguous in window */
+                        from += wnext - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    while (len > 2) {
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        len -= 3;
+                    }
+                    if (len) {
+                        PUP(out) = PUP(from);
+                        if (len > 1)
+                            PUP(out) = PUP(from);
+                    }
+                }
+                else {
+                    from = out - dist;          /* copy direct from output */
+                    do {                        /* minimum length is three */
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        len -= 3;
+                    } while (len > 2);
+                    if (len) {
+                        PUP(out) = PUP(from);
+                        if (len > 1)
+                            PUP(out) = PUP(from);
+                    }
+                }
+            }
+            else if ((op & 64) == 0) {          /* 2nd level distance code */
+                here = dcode[here.val + (hold & ((1U << op) - 1))];
+                goto dodist;
+            }
+            else {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+        }
+        else if ((op & 64) == 0) {              /* 2nd level length code */
+            here = lcode[here.val + (hold & ((1U << op) - 1))];
+            goto dolen;
+        }
+        else if (op & 32) {                     /* end-of-block */
+            Tracevv((stderr, "inflate:         end of block\n"));
+            state->mode = TYPE;
+            break;
+        }
+        else {
+            strm->msg = (char *)"invalid literal/length code";
+            state->mode = BAD;
+            break;
+        }
+    } while (in < last && out < end);
+
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    len = bits >> 3;
+    in -= len;
+    bits -= len << 3;
+    hold &= (1U << bits) - 1;
+
+    /* update state and return */
+    strm->next_in = in + OFF;
+    strm->next_out = out + OFF;
+    strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+    strm->avail_out = (unsigned)(out < end ?
+                                 257 + (end - out) : 257 - (out - end));
+    state->hold = hold;
+    state->bits = bits;
+    return;
+}
+
+/*
+   inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+   - Using bit fields for code structure
+   - Different op definition to avoid & for extra bits (do & for table bits)
+   - Three separate decoding do-loops for direct, window, and wnext == 0
+   - Special case for distance > 1 copies to do overlapped load and store copy
+   - Explicit branch predictions (based on measured branch probabilities)
+   - Deferring match copy and interspersed it with decoding subsequent codes
+   - Swapping literal/length else
+   - Swapping window/direct else
+   - Larger unrolled copy loops (three is about right)
+   - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/inffast.h	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,35 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995-2003, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/inffixed.h	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,118 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+    /* inffixed.h -- table for decoding fixed codes
+     * Generated automatically by makefixed().
+     */
+
+    /* WARNING: this file should *not* be used by applications.
+       It is part of the implementation of this library and is
+       subject to change. Applications should only use zlib.h.
+     */
+
+    static const code lenfix[512] = {
+        {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
+        {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
+        {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
+        {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
+        {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
+        {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
+        {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
+        {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
+        {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
+        {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
+        {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
+        {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
+        {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
+        {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
+        {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
+        {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
+        {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
+        {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+        {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
+        {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
+        {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
+        {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
+        {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
+        {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
+        {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
+        {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
+        {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
+        {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
+        {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
+        {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
+        {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
+        {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
+        {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
+        {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
+        {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
+        {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
+        {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
+        {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
+        {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
+        {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
+        {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
+        {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
+        {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
+        {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
+        {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
+        {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
+        {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
+        {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+        {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
+        {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
+        {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
+        {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
+        {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
+        {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
+        {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
+        {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
+        {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
+        {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
+        {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
+        {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
+        {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
+        {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
+        {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
+        {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
+        {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
+        {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+        {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
+        {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
+        {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
+        {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
+        {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
+        {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
+        {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
+        {0,9,255}
+    };
+
+    static const code distfix[32] = {
+        {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
+        {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
+        {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
+        {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
+        {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
+        {22,5,193},{64,5,0}
+    };
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/inflate.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,1536 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* inflate.c -- zlib decompression
+ * Copyright (C) 1995-2012 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * Change history:
+ *
+ * 1.2.beta0    24 Nov 2002
+ * - First version -- complete rewrite of inflate to simplify code, avoid
+ *   creation of window when not needed, minimize use of window when it is
+ *   needed, make inffast.c even faster, implement gzip decoding, and to
+ *   improve code readability and style over the previous zlib inflate code
+ *
+ * 1.2.beta1    25 Nov 2002
+ * - Use pointers for available input and output checking in inffast.c
+ * - Remove input and output counters in inffast.c
+ * - Change inffast.c entry and loop from avail_in >= 7 to >= 6
+ * - Remove unnecessary second byte pull from length extra in inffast.c
+ * - Unroll direct copy to three copies per loop in inffast.c
+ *
+ * 1.2.beta2    4 Dec 2002
+ * - Change external routine names to reduce potential conflicts
+ * - Correct filename to inffixed.h for fixed tables in inflate.c
+ * - Make hbuf[] unsigned char to match parameter type in inflate.c
+ * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset)
+ *   to avoid negation problem on Alphas (64 bit) in inflate.c
+ *
+ * 1.2.beta3    22 Dec 2002
+ * - Add comments on state->bits assertion in inffast.c
+ * - Add comments on op field in inftrees.h
+ * - Fix bug in reuse of allocated window after inflateReset()
+ * - Remove bit fields--back to byte structure for speed
+ * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths
+ * - Change post-increments to pre-increments in inflate_fast(), PPC biased?
+ * - Add compile time option, POSTINC, to use post-increments instead (Intel?)
+ * - Make MATCH copy in inflate() much faster for when inflate_fast() not used
+ * - Use local copies of stream next and avail values, as well as local bit
+ *   buffer and bit count in inflate()--for speed when inflate_fast() not used
+ *
+ * 1.2.beta4    1 Jan 2003
+ * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings
+ * - Move a comment on output buffer sizes from inffast.c to inflate.c
+ * - Add comments in inffast.c to introduce the inflate_fast() routine
+ * - Rearrange window copies in inflate_fast() for speed and simplification
+ * - Unroll last copy for window match in inflate_fast()
+ * - Use local copies of window variables in inflate_fast() for speed
+ * - Pull out common wnext == 0 case for speed in inflate_fast()
+ * - Make op and len in inflate_fast() unsigned for consistency
+ * - Add FAR to lcode and dcode declarations in inflate_fast()
+ * - Simplified bad distance check in inflate_fast()
+ * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new
+ *   source file infback.c to provide a call-back interface to inflate for
+ *   programs like gzip and unzip -- uses window as output buffer to avoid
+ *   window copying
+ *
+ * 1.2.beta5    1 Jan 2003
+ * - Improved inflateBack() interface to allow the caller to provide initial
+ *   input in strm.
+ * - Fixed stored blocks bug in inflateBack()
+ *
+ * 1.2.beta6    4 Jan 2003
+ * - Added comments in inffast.c on effectiveness of POSTINC
+ * - Typecasting all around to reduce compiler warnings
+ * - Changed loops from while (1) or do {} while (1) to for (;;), again to
+ *   make compilers happy
+ * - Changed type of window in inflateBackInit() to unsigned char *
+ *
+ * 1.2.beta7    27 Jan 2003
+ * - Changed many types to unsigned or unsigned short to avoid warnings
+ * - Added inflateCopy() function
+ *
+ * 1.2.0        9 Mar 2003
+ * - Changed inflateBack() interface to provide separate opaque descriptors
+ *   for the in() and out() functions
+ * - Changed inflateBack() argument and in_func typedef to swap the length
+ *   and buffer address return values for the input function
+ * - Check next_in and next_out for Z_NULL on entry to inflate()
+ *
+ * The history for versions after 1.2.0 are in ChangeLog in zlib distribution.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifdef MAKEFIXED
+#  ifndef BUILDFIXED
+#    define BUILDFIXED
+#  endif
+#endif
+
+/* function prototypes */
+local void fixedtables OF((struct inflate_state FAR *state));
+local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
+                           unsigned copy));
+#ifdef BUILDFIXED
+   void makefixed OF((void));
+#endif
+local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
+                              unsigned len));
+
+int ZEXPORT inflateResetKeep(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    strm->total_in = strm->total_out = state->total = 0;
+    strm->msg = Z_NULL;
+    if (state->wrap)        /* to support ill-conceived Java test suite */
+        strm->adler = state->wrap & 1;
+    state->mode = HEAD;
+    state->last = 0;
+    state->havedict = 0;
+    state->dmax = 32768U;
+    state->head = Z_NULL;
+    state->hold = 0;
+    state->bits = 0;
+    state->lencode = state->distcode = state->next = state->codes;
+    state->sane = 1;
+    state->back = -1;
+    Tracev((stderr, "inflate: reset\n"));
+    return Z_OK;
+}
+
+int ZEXPORT inflateReset(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    state->wsize = 0;
+    state->whave = 0;
+    state->wnext = 0;
+    return inflateResetKeep(strm);
+}
+
+int ZEXPORT inflateReset2(strm, windowBits)
+z_streamp strm;
+int windowBits;
+{
+    int wrap;
+    struct inflate_state FAR *state;
+
+    /* get the state */
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* extract wrap request from windowBits parameter */
+    if (windowBits < 0) {
+        wrap = 0;
+        windowBits = -windowBits;
+    }
+    else {
+        wrap = (windowBits >> 4) + 1;
+#ifdef GUNZIP
+        if (windowBits < 48)
+            windowBits &= 15;
+#endif
+    }
+
+    /* set number of window bits, free window if different */
+    if (windowBits && (windowBits < 8 || windowBits > 15))
+        return Z_STREAM_ERROR;
+    if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) {
+        ZFREE(strm, state->window);
+        state->window = Z_NULL;
+    }
+
+    /* update state and reset the rest of it */
+    state->wrap = wrap;
+    state->wbits = (unsigned)windowBits;
+    return inflateReset(strm);
+}
+
+int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
+z_streamp strm;
+int windowBits;
+const char *version;
+int stream_size;
+{
+    int ret;
+    struct inflate_state FAR *state;
+
+    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+        stream_size != (int)(sizeof(z_stream)))
+        return Z_VERSION_ERROR;
+    if (strm == Z_NULL) return Z_STREAM_ERROR;
+    strm->msg = Z_NULL;                 /* in case we return an error */
+    if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zalloc = zcalloc;
+        strm->opaque = (voidpf)0;
+#endif
+    }
+    if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zfree = zcfree;
+#endif
+    state = (struct inflate_state FAR *)
+            ZALLOC(strm, 1, sizeof(struct inflate_state));
+    if (state == Z_NULL) return Z_MEM_ERROR;
+    Tracev((stderr, "inflate: allocated\n"));
+    strm->state = (struct internal_state FAR *)state;
+    state->window = Z_NULL;
+    ret = inflateReset2(strm, windowBits);
+    if (ret != Z_OK) {
+        ZFREE(strm, state);
+        strm->state = Z_NULL;
+    }
+    return ret;
+}
+
+int ZEXPORT inflateInit_(strm, version, stream_size)
+z_streamp strm;
+const char *version;
+int stream_size;
+{
+    return inflateInit2_(strm, DEF_WBITS, version, stream_size);
+}
+
+int ZEXPORT inflatePrime(strm, bits, value)
+z_streamp strm;
+int bits;
+int value;
+{
+    struct inflate_state FAR *state;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (bits < 0) {
+        state->hold = 0;
+        state->bits = 0;
+        return Z_OK;
+    }
+    if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
+    value &= (1L << bits) - 1;
+    state->hold += value << state->bits;
+    state->bits += bits;
+    return Z_OK;
+}
+
+/*
+   Return state with length and distance decoding tables and index sizes set to
+   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
+   If BUILDFIXED is defined, then instead this routine builds the tables the
+   first time it's called, and returns those tables the first time and
+   thereafter.  This reduces the size of the code by about 2K bytes, in
+   exchange for a little execution time.  However, BUILDFIXED should not be
+   used for threaded applications, since the rewriting of the tables and virgin
+   may not be thread-safe.
+ */
+local void fixedtables(state)
+struct inflate_state FAR *state;
+{
+#ifdef BUILDFIXED
+    static int virgin = 1;
+    static code *lenfix, *distfix;
+    static code fixed[544];
+
+    /* build fixed huffman tables if first call (may not be thread safe) */
+    if (virgin) {
+        unsigned sym, bits;
+        static code *next;
+
+        /* literal/length table */
+        sym = 0;
+        while (sym < 144) state->lens[sym++] = 8;
+        while (sym < 256) state->lens[sym++] = 9;
+        while (sym < 280) state->lens[sym++] = 7;
+        while (sym < 288) state->lens[sym++] = 8;
+        next = fixed;
+        lenfix = next;
+        bits = 9;
+        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+        /* distance table */
+        sym = 0;
+        while (sym < 32) state->lens[sym++] = 5;
+        distfix = next;
+        bits = 5;
+        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+        /* do this just once */
+        virgin = 0;
+    }
+#else /* !BUILDFIXED */
+#   include "inffixed.h"
+#endif /* BUILDFIXED */
+    state->lencode = lenfix;
+    state->lenbits = 9;
+    state->distcode = distfix;
+    state->distbits = 5;
+}
+
+#ifdef MAKEFIXED
+#include <stdio.h>
+
+/*
+   Write out the inffixed.h that is #include'd above.  Defining MAKEFIXED also
+   defines BUILDFIXED, so the tables are built on the fly.  makefixed() writes
+   those tables to stdout, which would be piped to inffixed.h.  A small program
+   can simply call makefixed to do this:
+
+    void makefixed(void);
+
+    int main(void)
+    {
+        makefixed();
+        return 0;
+    }
+
+   Then that can be linked with zlib built with MAKEFIXED defined and run:
+
+    a.out > inffixed.h
+ */
+void makefixed()
+{
+    unsigned low, size;
+    struct inflate_state state;
+
+    fixedtables(&state);
+    puts("    /* inffixed.h -- table for decoding fixed codes");
+    puts("     * Generated automatically by makefixed().");
+    puts("     */");
+    puts("");
+    puts("    /* WARNING: this file should *not* be used by applications.");
+    puts("       It is part of the implementation of this library and is");
+    puts("       subject to change. Applications should only use zlib.h.");
+    puts("     */");
+    puts("");
+    size = 1U << 9;
+    printf("    static const code lenfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 7) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op,
+               state.lencode[low].bits, state.lencode[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+    size = 1U << 5;
+    printf("\n    static const code distfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 6) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits,
+               state.distcode[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+}
+#endif /* MAKEFIXED */
+
+/*
+   Update the window with the last wsize (normally 32K) bytes written before
+   returning.  If window does not exist yet, create it.  This is only called
+   when a window is already in use, or when output has been written during this
+   inflate call, but the end of the deflate stream has not been reached yet.
+   It is also called to create a window for dictionary data when a dictionary
+   is loaded.
+
+   Providing output buffers larger than 32K to inflate() should provide a speed
+   advantage, since only the last 32K of output is copied to the sliding window
+   upon return from inflate(), and since all distances after the first 32K of
+   output will fall in the output data, making match copies simpler and faster.
+   The advantage may be dependent on the size of the processor's data caches.
+ */
+local int updatewindow(strm, end, copy)
+z_streamp strm;
+const Bytef *end;
+unsigned copy;
+{
+    struct inflate_state FAR *state;
+    unsigned dist;
+
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* if it hasn't been done already, allocate space for the window */
+    if (state->window == Z_NULL) {
+        state->window = (unsigned char FAR *)
+                        ZALLOC(strm, 1U << state->wbits,
+                               sizeof(unsigned char));
+        if (state->window == Z_NULL) return 1;
+    }
+
+    /* if window not in use yet, initialize */
+    if (state->wsize == 0) {
+        state->wsize = 1U << state->wbits;
+        state->wnext = 0;
+        state->whave = 0;
+    }
+
+    /* copy state->wsize or less output bytes into the circular window */
+    if (copy >= state->wsize) {
+        zmemcpy(state->window, end - state->wsize, state->wsize);
+        state->wnext = 0;
+        state->whave = state->wsize;
+    }
+    else {
+        dist = state->wsize - state->wnext;
+        if (dist > copy) dist = copy;
+        zmemcpy(state->window + state->wnext, end - copy, dist);
+        copy -= dist;
+        if (copy) {
+            zmemcpy(state->window, end - copy, copy);
+            state->wnext = copy;
+            state->whave = state->wsize;
+        }
+        else {
+            state->wnext += dist;
+            if (state->wnext == state->wsize) state->wnext = 0;
+            if (state->whave < state->wsize) state->whave += dist;
+        }
+    }
+    return 0;
+}
+
+/* Macros for inflate(): */
+
+/* check function to use adler32() for zlib or crc32() for gzip */
+#ifdef GUNZIP
+#  define UPDATE(check, buf, len) \
+    (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
+#else
+#  define UPDATE(check, buf, len) adler32(check, buf, len)
+#endif
+
+/* check macros for header crc */
+#ifdef GUNZIP
+#  define CRC2(check, word) \
+    do { \
+        hbuf[0] = (unsigned char)(word); \
+        hbuf[1] = (unsigned char)((word) >> 8); \
+        check = crc32(check, hbuf, 2); \
+    } while (0)
+
+#  define CRC4(check, word) \
+    do { \
+        hbuf[0] = (unsigned char)(word); \
+        hbuf[1] = (unsigned char)((word) >> 8); \
+        hbuf[2] = (unsigned char)((word) >> 16); \
+        hbuf[3] = (unsigned char)((word) >> 24); \
+        check = crc32(check, hbuf, 4); \
+    } while (0)
+#endif
+
+/* Load registers with state in inflate() for speed */
+#define LOAD() \
+    do { \
+        put = strm->next_out; \
+        left = strm->avail_out; \
+        next = strm->next_in; \
+        have = strm->avail_in; \
+        hold = state->hold; \
+        bits = state->bits; \
+    } while (0)
+
+/* Restore state from registers in inflate() */
+#define RESTORE() \
+    do { \
+        strm->next_out = put; \
+        strm->avail_out = left; \
+        strm->next_in = next; \
+        strm->avail_in = have; \
+        state->hold = hold; \
+        state->bits = bits; \
+    } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+    do { \
+        hold = 0; \
+        bits = 0; \
+    } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflate()
+   if there is no input available. */
+#define PULLBYTE() \
+    do { \
+        if (have == 0) goto inf_leave; \
+        have--; \
+        hold += (unsigned long)(*next++) << bits; \
+        bits += 8; \
+    } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator.  If there is
+   not enough available input to do that, then return from inflate(). */
+#define NEEDBITS(n) \
+    do { \
+        while (bits < (unsigned)(n)) \
+            PULLBYTE(); \
+    } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+    ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+    do { \
+        hold >>= (n); \
+        bits -= (unsigned)(n); \
+    } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+    do { \
+        hold >>= bits & 7; \
+        bits -= bits & 7; \
+    } while (0)
+
+/*
+   inflate() uses a state machine to process as much input data and generate as
+   much output data as possible before returning.  The state machine is
+   structured roughly as follows:
+
+    for (;;) switch (state) {
+    ...
+    case STATEn:
+        if (not enough input data or output space to make progress)
+            return;
+        ... make progress ...
+        state = STATEm;
+        break;
+    ...
+    }
+
+   so when inflate() is called again, the same case is attempted again, and
+   if the appropriate resources are provided, the machine proceeds to the
+   next state.  The NEEDBITS() macro is usually the way the state evaluates
+   whether it can proceed or should return.  NEEDBITS() does the return if
+   the requested bits are not available.  The typical use of the BITS macros
+   is:
+
+        NEEDBITS(n);
+        ... do something with BITS(n) ...
+        DROPBITS(n);
+
+   where NEEDBITS(n) either returns from inflate() if there isn't enough
+   input left to load n bits into the accumulator, or it continues.  BITS(n)
+   gives the low n bits in the accumulator.  When done, DROPBITS(n) drops
+   the low n bits off the accumulator.  INITBITS() clears the accumulator
+   and sets the number of available bits to zero.  BYTEBITS() discards just
+   enough bits to put the accumulator on a byte boundary.  After BYTEBITS()
+   and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
+
+   NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
+   if there is no input available.  The decoding of variable length codes uses
+   PULLBYTE() directly in order to pull just enough bytes to decode the next
+   code, and no more.
+
+   Some states loop until they get enough input, making sure that enough
+   state information is maintained to continue the loop where it left off
+   if NEEDBITS() returns in the loop.  For example, want, need, and keep
+   would all have to actually be part of the saved state in case NEEDBITS()
+   returns:
+
+    case STATEw:
+        while (want < need) {
+            NEEDBITS(n);
+            keep[want++] = BITS(n);
+            DROPBITS(n);
+        }
+        state = STATEx;
+    case STATEx:
+
+   As shown above, if the next state is also the next case, then the break
+   is omitted.
+
+   A state may also return if there is not enough output space available to
+   complete that state.  Those states are copying stored data, writing a
+   literal byte, and copying a matching string.
+
+   When returning, a "goto inf_leave" is used to update the total counters,
+   update the check value, and determine whether any progress has been made
+   during that inflate() call in order to return the proper return code.
+   Progress is defined as a change in either strm->avail_in or strm->avail_out.
+   When there is a window, goto inf_leave will update the window with the last
+   output written.  If a goto inf_leave occurs in the middle of decompression
+   and there is no window currently, goto inf_leave will create one and copy
+   output to the window for the next call of inflate().
+
+   In this implementation, the flush parameter of inflate() only affects the
+   return code (per zlib.h).  inflate() always writes as much as possible to
+   strm->next_out, given the space available and the provided input--the effect
+   documented in zlib.h of Z_SYNC_FLUSH.  Furthermore, inflate() always defers
+   the allocation of and copying into a sliding window until necessary, which
+   provides the effect documented in zlib.h for Z_FINISH when the entire input
+   stream available.  So the only thing the flush parameter actually does is:
+   when flush is set to Z_FINISH, inflate() cannot return Z_OK.  Instead it
+   will return Z_BUF_ERROR if it has not reached the end of the stream.
+ */
+
+int ZEXPORT inflate(strm, flush)
+z_streamp strm;
+int flush;
+{
+    struct inflate_state FAR *state;
+    z_const unsigned char FAR *next;    /* next input */
+    unsigned char FAR *put;     /* next output */
+    unsigned have, left;        /* available input and output */
+    unsigned long hold;         /* bit buffer */
+    unsigned bits;              /* bits in bit buffer */
+    unsigned in, out;           /* save starting available input and output */
+    unsigned copy;              /* number of stored or match bytes to copy */
+    unsigned char FAR *from;    /* where to copy match bytes from */
+    code here;                  /* current decoding table entry */
+    code last;                  /* parent table entry */
+    unsigned len;               /* length to copy for repeats, bits to drop */
+    int ret;                    /* return code */
+#ifdef GUNZIP
+    unsigned char hbuf[4];      /* buffer for gzip header crc calculation */
+#endif
+    static const unsigned short order[19] = /* permutation of code lengths */
+        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+    if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL ||
+        (strm->next_in == Z_NULL && strm->avail_in != 0))
+        return Z_STREAM_ERROR;
+
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->mode == TYPE) state->mode = TYPEDO;      /* skip check */
+    LOAD();
+    in = have;
+    out = left;
+    ret = Z_OK;
+    for (;;)
+        switch (state->mode) {
+        case HEAD:
+            if (state->wrap == 0) {
+                state->mode = TYPEDO;
+                break;
+            }
+            NEEDBITS(16);
+#ifdef GUNZIP
+            if ((state->wrap & 2) && hold == 0x8b1f) {  /* gzip header */
+                state->check = crc32(0L, Z_NULL, 0);
+                CRC2(state->check, hold);
+                INITBITS();
+                state->mode = FLAGS;
+                break;
+            }
+            state->flags = 0;           /* expect zlib header */
+            if (state->head != Z_NULL)
+                state->head->done = -1;
+            if (!(state->wrap & 1) ||   /* check if zlib header allowed */
+#else
+            if (
+#endif
+                ((BITS(8) << 8) + (hold >> 8)) % 31) {
+                strm->msg = (char *)"incorrect header check";
+                state->mode = BAD;
+                break;
+            }
+            if (BITS(4) != Z_DEFLATED) {
+                strm->msg = (char *)"unknown compression method";
+                state->mode = BAD;
+                break;
+            }
+            DROPBITS(4);
+            len = BITS(4) + 8;
+            if (state->wbits == 0)
+                state->wbits = len;
+            else if (len > state->wbits) {
+                strm->msg = (char *)"invalid window size";
+                state->mode = BAD;
+                break;
+            }
+            state->dmax = 1U << len;
+            Tracev((stderr, "inflate:   zlib header ok\n"));
+            strm->adler = state->check = adler32(0L, Z_NULL, 0);
+            state->mode = hold & 0x200 ? DICTID : TYPE;
+            INITBITS();
+            break;
+#ifdef GUNZIP
+        case FLAGS:
+            NEEDBITS(16);
+            state->flags = (int)(hold);
+            if ((state->flags & 0xff) != Z_DEFLATED) {
+                strm->msg = (char *)"unknown compression method";
+                state->mode = BAD;
+                break;
+            }
+            if (state->flags & 0xe000) {
+                strm->msg = (char *)"unknown header flags set";
+                state->mode = BAD;
+                break;
+            }
+            if (state->head != Z_NULL)
+                state->head->text = (int)((hold >> 8) & 1);
+            if (state->flags & 0x0200) CRC2(state->check, hold);
+            INITBITS();
+            state->mode = TIME;
+        case TIME:
+            NEEDBITS(32);
+            if (state->head != Z_NULL)
+                state->head->time = hold;
+            if (state->flags & 0x0200) CRC4(state->check, hold);
+            INITBITS();
+            state->mode = OS;
+        case OS:
+            NEEDBITS(16);
+            if (state->head != Z_NULL) {
+                state->head->xflags = (int)(hold & 0xff);
+                state->head->os = (int)(hold >> 8);
+            }
+            if (state->flags & 0x0200) CRC2(state->check, hold);
+            INITBITS();
+            state->mode = EXLEN;
+        case EXLEN:
+            if (state->flags & 0x0400) {
+                NEEDBITS(16);
+                state->length = (unsigned)(hold);
+                if (state->head != Z_NULL)
+                    state->head->extra_len = (unsigned)hold;
+                if (state->flags & 0x0200) CRC2(state->check, hold);
+                INITBITS();
+            }
+            else if (state->head != Z_NULL)
+                state->head->extra = Z_NULL;
+            state->mode = EXTRA;
+        case EXTRA:
+            if (state->flags & 0x0400) {
+                copy = state->length;
+                if (copy > have) copy = have;
+                if (copy) {
+                    if (state->head != Z_NULL &&
+                        state->head->extra != Z_NULL) {
+                        len = state->head->extra_len - state->length;
+                        zmemcpy(state->head->extra + len, next,
+                                len + copy > state->head->extra_max ?
+                                state->head->extra_max - len : copy);
+                    }
+                    if (state->flags & 0x0200)
+                        state->check = crc32(state->check, next, copy);
+                    have -= copy;
+                    next += copy;
+                    state->length -= copy;
+                }
+                if (state->length) goto inf_leave;
+            }
+            state->length = 0;
+            state->mode = NAME;
+        case NAME:
+            if (state->flags & 0x0800) {
+                if (have == 0) goto inf_leave;
+                copy = 0;
+                do {
+                    len = (unsigned)(next[copy++]);
+                    if (state->head != Z_NULL &&
+                            state->head->name != Z_NULL &&
+                            state->length < state->head->name_max)
+                        state->head->name[state->length++] = len;
+                } while (len && copy < have);
+                if (state->flags & 0x0200)
+                    state->check = crc32(state->check, next, copy);
+                have -= copy;
+                next += copy;
+                if (len) goto inf_leave;
+            }
+            else if (state->head != Z_NULL)
+                state->head->name = Z_NULL;
+            state->length = 0;
+            state->mode = COMMENT;
+        case COMMENT:
+            if (state->flags & 0x1000) {
+                if (have == 0) goto inf_leave;
+                copy = 0;
+                do {
+                    len = (unsigned)(next[copy++]);
+                    if (state->head != Z_NULL &&
+                            state->head->comment != Z_NULL &&
+                            state->length < state->head->comm_max)
+                        state->head->comment[state->length++] = len;
+                } while (len && copy < have);
+                if (state->flags & 0x0200)
+                    state->check = crc32(state->check, next, copy);
+                have -= copy;
+                next += copy;
+                if (len) goto inf_leave;
+            }
+            else if (state->head != Z_NULL)
+                state->head->comment = Z_NULL;
+            state->mode = HCRC;
+        case HCRC:
+            if (state->flags & 0x0200) {
+                NEEDBITS(16);
+                if (hold != (state->check & 0xffff)) {
+                    strm->msg = (char *)"header crc mismatch";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+            }
+            if (state->head != Z_NULL) {
+                state->head->hcrc = (int)((state->flags >> 9) & 1);
+                state->head->done = 1;
+            }
+            strm->adler = state->check = crc32(0L, Z_NULL, 0);
+            state->mode = TYPE;
+            break;
+#endif
+        case DICTID:
+            NEEDBITS(32);
+            strm->adler = state->check = ZSWAP32(hold);
+            INITBITS();
+            state->mode = DICT;
+        case DICT:
+            if (state->havedict == 0) {
+                RESTORE();
+                return Z_NEED_DICT;
+            }
+            strm->adler = state->check = adler32(0L, Z_NULL, 0);
+            state->mode = TYPE;
+        case TYPE:
+            if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave;
+        case TYPEDO:
+            if (state->last) {
+                BYTEBITS();
+                state->mode = CHECK;
+                break;
+            }
+            NEEDBITS(3);
+            state->last = BITS(1);
+            DROPBITS(1);
+            switch (BITS(2)) {
+            case 0:                             /* stored block */
+                Tracev((stderr, "inflate:     stored block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = STORED;
+                break;
+            case 1:                             /* fixed block */
+                fixedtables(state);
+                Tracev((stderr, "inflate:     fixed codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = LEN_;             /* decode codes */
+                if (flush == Z_TREES) {
+                    DROPBITS(2);
+                    goto inf_leave;
+                }
+                break;
+            case 2:                             /* dynamic block */
+                Tracev((stderr, "inflate:     dynamic codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = TABLE;
+                break;
+            case 3:
+                strm->msg = (char *)"invalid block type";
+                state->mode = BAD;
+            }
+            DROPBITS(2);
+            break;
+        case STORED:
+            BYTEBITS();                         /* go to byte boundary */
+            NEEDBITS(32);
+            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+                strm->msg = (char *)"invalid stored block lengths";
+                state->mode = BAD;
+                break;
+            }
+            state->length = (unsigned)hold & 0xffff;
+            Tracev((stderr, "inflate:       stored length %u\n",
+                    state->length));
+            INITBITS();
+            state->mode = COPY_;
+            if (flush == Z_TREES) goto inf_leave;
+        case COPY_:
+            state->mode = COPY;
+        case COPY:
+            copy = state->length;
+            if (copy) {
+                if (copy > have) copy = have;
+                if (copy > left) copy = left;
+                if (copy == 0) goto inf_leave;
+                zmemcpy(put, next, copy);
+                have -= copy;
+                next += copy;
+                left -= copy;
+                put += copy;
+                state->length -= copy;
+                break;
+            }
+            Tracev((stderr, "inflate:       stored end\n"));
+            state->mode = TYPE;
+            break;
+        case TABLE:
+            NEEDBITS(14);
+            state->nlen = BITS(5) + 257;
+            DROPBITS(5);
+            state->ndist = BITS(5) + 1;
+            DROPBITS(5);
+            state->ncode = BITS(4) + 4;
+            DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+            if (state->nlen > 286 || state->ndist > 30) {
+                strm->msg = (char *)"too many length or distance symbols";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracev((stderr, "inflate:       table sizes ok\n"));
+            state->have = 0;
+            state->mode = LENLENS;
+        case LENLENS:
+            while (state->have < state->ncode) {
+                NEEDBITS(3);
+                state->lens[order[state->have++]] = (unsigned short)BITS(3);
+                DROPBITS(3);
+            }
+            while (state->have < 19)
+                state->lens[order[state->have++]] = 0;
+            state->next = state->codes;
+            state->lencode = (const code FAR *)(state->next);
+            state->lenbits = 7;
+            ret = inflate_table(CODES, state->lens, 19, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid code lengths set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       code lengths ok\n"));
+            state->have = 0;
+            state->mode = CODELENS;
+        case CODELENS:
+            while (state->have < state->nlen + state->ndist) {
+                for (;;) {
+                    here = state->lencode[BITS(state->lenbits)];
+                    if ((unsigned)(here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                if (here.val < 16) {
+                    DROPBITS(here.bits);
+                    state->lens[state->have++] = here.val;
+                }
+                else {
+                    if (here.val == 16) {
+                        NEEDBITS(here.bits + 2);
+                        DROPBITS(here.bits);
+                        if (state->have == 0) {
+                            strm->msg = (char *)"invalid bit length repeat";
+                            state->mode = BAD;
+                            break;
+                        }
+                        len = state->lens[state->have - 1];
+                        copy = 3 + BITS(2);
+                        DROPBITS(2);
+                    }
+                    else if (here.val == 17) {
+                        NEEDBITS(here.bits + 3);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 3 + BITS(3);
+                        DROPBITS(3);
+                    }
+                    else {
+                        NEEDBITS(here.bits + 7);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 11 + BITS(7);
+                        DROPBITS(7);
+                    }
+                    if (state->have + copy > state->nlen + state->ndist) {
+                        strm->msg = (char *)"invalid bit length repeat";
+                        state->mode = BAD;
+                        break;
+                    }
+                    while (copy--)
+                        state->lens[state->have++] = (unsigned short)len;
+                }
+            }
+
+            /* handle error breaks in while */
+            if (state->mode == BAD) break;
+
+            /* check for end-of-block code (better have one) */
+            if (state->lens[256] == 0) {
+                strm->msg = (char *)"invalid code -- missing end-of-block";
+                state->mode = BAD;
+                break;
+            }
+
+            /* build code tables -- note: do not change the lenbits or distbits
+               values here (9 and 6) without reading the comments in inftrees.h
+               concerning the ENOUGH constants, which depend on those values */
+            state->next = state->codes;
+            state->lencode = (const code FAR *)(state->next);
+            state->lenbits = 9;
+            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid literal/lengths set";
+                state->mode = BAD;
+                break;
+            }
+            state->distcode = (const code FAR *)(state->next);
+            state->distbits = 6;
+            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+                            &(state->next), &(state->distbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid distances set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       codes ok\n"));
+            state->mode = LEN_;
+            if (flush == Z_TREES) goto inf_leave;
+        case LEN_:
+            state->mode = LEN;
+        case LEN:
+            if (have >= 6 && left >= 258) {
+                RESTORE();
+                inflate_fast(strm, out);
+                LOAD();
+                if (state->mode == TYPE)
+                    state->back = -1;
+                break;
+            }
+            state->back = 0;
+            for (;;) {
+                here = state->lencode[BITS(state->lenbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if (here.op && (here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->lencode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+                state->back += last.bits;
+            }
+            DROPBITS(here.bits);
+            state->back += here.bits;
+            state->length = (unsigned)here.val;
+            if ((int)(here.op) == 0) {
+                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                        "inflate:         literal '%c'\n" :
+                        "inflate:         literal 0x%02x\n", here.val));
+                state->mode = LIT;
+                break;
+            }
+            if (here.op & 32) {
+                Tracevv((stderr, "inflate:         end of block\n"));
+                state->back = -1;
+                state->mode = TYPE;
+                break;
+            }
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid literal/length code";
+                state->mode = BAD;
+                break;
+            }
+            state->extra = (unsigned)(here.op) & 15;
+            state->mode = LENEXT;
+        case LENEXT:
+            if (state->extra) {
+                NEEDBITS(state->extra);
+                state->length += BITS(state->extra);
+                DROPBITS(state->extra);
+                state->back += state->extra;
+            }
+            Tracevv((stderr, "inflate:         length %u\n", state->length));
+            state->was = state->length;
+            state->mode = DIST;
+        case DIST:
+            for (;;) {
+                here = state->distcode[BITS(state->distbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if ((here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->distcode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+                state->back += last.bits;
+            }
+            DROPBITS(here.bits);
+            state->back += here.bits;
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+            state->offset = (unsigned)here.val;
+            state->extra = (unsigned)(here.op) & 15;
+            state->mode = DISTEXT;
+        case DISTEXT:
+            if (state->extra) {
+                NEEDBITS(state->extra);
+                state->offset += BITS(state->extra);
+                DROPBITS(state->extra);
+                state->back += state->extra;
+            }
+#ifdef INFLATE_STRICT
+            if (state->offset > state->dmax) {
+                strm->msg = (char *)"invalid distance too far back";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
+            state->mode = MATCH;
+        case MATCH:
+            if (left == 0) goto inf_leave;
+            copy = out - left;
+            if (state->offset > copy) {         /* copy from window */
+                copy = state->offset - copy;
+                if (copy > state->whave) {
+                    if (state->sane) {
+                        strm->msg = (char *)"invalid distance too far back";
+                        state->mode = BAD;
+                        break;
+                    }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+                    Trace((stderr, "inflate.c too far\n"));
+                    copy -= state->whave;
+                    if (copy > state->length) copy = state->length;
+                    if (copy > left) copy = left;
+                    left -= copy;
+                    state->length -= copy;
+                    do {
+                        *put++ = 0;
+                    } while (--copy);
+                    if (state->length == 0) state->mode = LEN;
+                    break;
+#endif
+                }
+                if (copy > state->wnext) {
+                    copy -= state->wnext;
+                    from = state->window + (state->wsize - copy);
+                }
+                else
+                    from = state->window + (state->wnext - copy);
+                if (copy > state->length) copy = state->length;
+            }
+            else {                              /* copy from output */
+                from = put - state->offset;
+                copy = state->length;
+            }
+            if (copy > left) copy = left;
+            left -= copy;
+            state->length -= copy;
+            do {
+                *put++ = *from++;
+            } while (--copy);
+            if (state->length == 0) state->mode = LEN;
+            break;
+        case LIT:
+            if (left == 0) goto inf_leave;
+            *put++ = (unsigned char)(state->length);
+            left--;
+            state->mode = LEN;
+            break;
+        case CHECK:
+            if (state->wrap) {
+                NEEDBITS(32);
+                out -= left;
+                strm->total_out += out;
+                state->total += out;
+                if (out)
+                    strm->adler = state->check =
+                        UPDATE(state->check, put - out, out);
+                out = left;
+                if ((
+#ifdef GUNZIP
+                     state->flags ? hold :
+#endif
+                     ZSWAP32(hold)) != state->check) {
+                    strm->msg = (char *)"incorrect data check";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+                Tracev((stderr, "inflate:   check matches trailer\n"));
+            }
+#ifdef GUNZIP
+            state->mode = LENGTH;
+        case LENGTH:
+            if (state->wrap && state->flags) {
+                NEEDBITS(32);
+                if (hold != (state->total & 0xffffffffUL)) {
+                    strm->msg = (char *)"incorrect length check";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+                Tracev((stderr, "inflate:   length matches trailer\n"));
+            }
+#endif
+            state->mode = DONE;
+        case DONE:
+            ret = Z_STREAM_END;
+            goto inf_leave;
+        case BAD:
+            ret = Z_DATA_ERROR;
+            goto inf_leave;
+        case MEM:
+            return Z_MEM_ERROR;
+        case SYNC:
+        default:
+            return Z_STREAM_ERROR;
+        }
+
+    /*
+       Return from inflate(), updating the total counts and the check value.
+       If there was no progress during the inflate() call, return a buffer
+       error.  Call updatewindow() to create and/or update the window state.
+       Note: a memory error from inflate() is non-recoverable.
+     */
+  inf_leave:
+    RESTORE();
+    if (state->wsize || (out != strm->avail_out && state->mode < BAD &&
+            (state->mode < CHECK || flush != Z_FINISH)))
+        if (updatewindow(strm, strm->next_out, out - strm->avail_out)) {
+            state->mode = MEM;
+            return Z_MEM_ERROR;
+        }
+    in -= strm->avail_in;
+    out -= strm->avail_out;
+    strm->total_in += in;
+    strm->total_out += out;
+    state->total += out;
+    if (state->wrap && out)
+        strm->adler = state->check =
+            UPDATE(state->check, strm->next_out - out, out);
+    strm->data_type = state->bits + (state->last ? 64 : 0) +
+                      (state->mode == TYPE ? 128 : 0) +
+                      (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
+    if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
+        ret = Z_BUF_ERROR;
+    return ret;
+}
+
+int ZEXPORT inflateEnd(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->window != Z_NULL) ZFREE(strm, state->window);
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+    Tracev((stderr, "inflate: end\n"));
+    return Z_OK;
+}
+
+int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+Bytef *dictionary;
+uInt *dictLength;
+{
+    struct inflate_state FAR *state;
+
+    /* check state */
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* copy dictionary */
+    if (state->whave && dictionary != Z_NULL) {
+        zmemcpy(dictionary, state->window + state->wnext,
+                state->whave - state->wnext);
+        zmemcpy(dictionary + state->whave - state->wnext,
+                state->window, state->wnext);
+    }
+    if (dictLength != Z_NULL)
+        *dictLength = state->whave;
+    return Z_OK;
+}
+
+int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+const Bytef *dictionary;
+uInt dictLength;
+{
+    struct inflate_state FAR *state;
+    unsigned long dictid;
+    int ret;
+
+    /* check state */
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->wrap != 0 && state->mode != DICT)
+        return Z_STREAM_ERROR;
+
+    /* check for correct dictionary identifier */
+    if (state->mode == DICT) {
+        dictid = adler32(0L, Z_NULL, 0);
+        dictid = adler32(dictid, dictionary, dictLength);
+        if (dictid != state->check)
+            return Z_DATA_ERROR;
+    }
+
+    /* copy dictionary to window using updatewindow(), which will amend the
+       existing dictionary if appropriate */
+    ret = updatewindow(strm, dictionary + dictLength, dictLength);
+    if (ret) {
+        state->mode = MEM;
+        return Z_MEM_ERROR;
+    }
+    state->havedict = 1;
+    Tracev((stderr, "inflate:   dictionary set\n"));
+    return Z_OK;
+}
+
+int ZEXPORT inflateGetHeader(strm, head)
+z_streamp strm;
+gz_headerp head;
+{
+    struct inflate_state FAR *state;
+
+    /* check state */
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
+
+    /* save header structure */
+    state->head = head;
+    head->done = 0;
+    return Z_OK;
+}
+
+/*
+   Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff.  Return when found
+   or when out of input.  When called, *have is the number of pattern bytes
+   found in order so far, in 0..3.  On return *have is updated to the new
+   state.  If on return *have equals four, then the pattern was found and the
+   return value is how many bytes were read including the last byte of the
+   pattern.  If *have is less than four, then the pattern has not been found
+   yet and the return value is len.  In the latter case, syncsearch() can be
+   called again with more data and the *have state.  *have is initialized to
+   zero for the first call.
+ */
+local unsigned syncsearch(have, buf, len)
+unsigned FAR *have;
+const unsigned char FAR *buf;
+unsigned len;
+{
+    unsigned got;
+    unsigned next;
+
+    got = *have;
+    next = 0;
+    while (next < len && got < 4) {
+        if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
+            got++;
+        else if (buf[next])
+            got = 0;
+        else
+            got = 4 - got;
+        next++;
+    }
+    *have = got;
+    return next;
+}
+
+int ZEXPORT inflateSync(strm)
+z_streamp strm;
+{
+    unsigned len;               /* number of bytes to look at or looked at */
+    unsigned long in, out;      /* temporary to save total_in and total_out */
+    unsigned char buf[4];       /* to restore bit buffer to byte string */
+    struct inflate_state FAR *state;
+
+    /* check parameters */
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
+
+    /* if first time, start search in bit buffer */
+    if (state->mode != SYNC) {
+        state->mode = SYNC;
+        state->hold <<= state->bits & 7;
+        state->bits -= state->bits & 7;
+        len = 0;
+        while (state->bits >= 8) {
+            buf[len++] = (unsigned char)(state->hold);
+            state->hold >>= 8;
+            state->bits -= 8;
+        }
+        state->have = 0;
+        syncsearch(&(state->have), buf, len);
+    }
+
+    /* search available input */
+    len = syncsearch(&(state->have), strm->next_in, strm->avail_in);
+    strm->avail_in -= len;
+    strm->next_in += len;
+    strm->total_in += len;
+
+    /* return no joy or set up to restart inflate() on a new block */
+    if (state->have != 4) return Z_DATA_ERROR;
+    in = strm->total_in;  out = strm->total_out;
+    inflateReset(strm);
+    strm->total_in = in;  strm->total_out = out;
+    state->mode = TYPE;
+    return Z_OK;
+}
+
+/*
+   Returns true if inflate is currently at the end of a block generated by
+   Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+   implementation to provide an additional safety check. PPP uses
+   Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
+   block. When decompressing, PPP checks that at the end of input packet,
+   inflate is waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    return state->mode == STORED && state->bits == 0;
+}
+
+int ZEXPORT inflateCopy(dest, source)
+z_streamp dest;
+z_streamp source;
+{
+    struct inflate_state FAR *state;
+    struct inflate_state FAR *copy;
+    unsigned char FAR *window;
+    unsigned wsize;
+
+    /* check input */
+    if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL ||
+        source->zalloc == (alloc_func)0 || source->zfree == (free_func)0)
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)source->state;
+
+    /* allocate space */
+    copy = (struct inflate_state FAR *)
+           ZALLOC(source, 1, sizeof(struct inflate_state));
+    if (copy == Z_NULL) return Z_MEM_ERROR;
+    window = Z_NULL;
+    if (state->window != Z_NULL) {
+        window = (unsigned char FAR *)
+                 ZALLOC(source, 1U << state->wbits, sizeof(unsigned char));
+        if (window == Z_NULL) {
+            ZFREE(source, copy);
+            return Z_MEM_ERROR;
+        }
+    }
+
+    /* copy state */
+    zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
+    zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
+    if (state->lencode >= state->codes &&
+        state->lencode <= state->codes + ENOUGH - 1) {
+        copy->lencode = copy->codes + (state->lencode - state->codes);
+        copy->distcode = copy->codes + (state->distcode - state->codes);
+    }
+    copy->next = copy->codes + (state->next - state->codes);
+    if (window != Z_NULL) {
+        wsize = 1U << state->wbits;
+        zmemcpy(window, state->window, wsize);
+    }
+    copy->window = window;
+    dest->state = (struct internal_state FAR *)copy;
+    return Z_OK;
+}
+
+int ZEXPORT inflateUndermine(strm, subvert)
+z_streamp strm;
+int subvert;
+{
+    struct inflate_state FAR *state;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    state->sane = !subvert;
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+    return Z_OK;
+#else
+    state->sane = 1;
+    return Z_DATA_ERROR;
+#endif
+}
+
+long ZEXPORT inflateMark(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return -1L << 16;
+    state = (struct inflate_state FAR *)strm->state;
+    return ((long)(state->back) << 16) +
+        (state->mode == COPY ? state->length :
+            (state->mode == MATCH ? state->was - state->length : 0));
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/inflate.h	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,146 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2009 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in
+   the crc code when it is not needed.  For shared libraries, gzip decoding
+   should be left enabled. */
+#ifndef NO_GZIP
+#  define GUNZIP
+#endif
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+    HEAD,       /* i: waiting for magic header */
+    FLAGS,      /* i: waiting for method and flags (gzip) */
+    TIME,       /* i: waiting for modification time (gzip) */
+    OS,         /* i: waiting for extra flags and operating system (gzip) */
+    EXLEN,      /* i: waiting for extra length (gzip) */
+    EXTRA,      /* i: waiting for extra bytes (gzip) */
+    NAME,       /* i: waiting for end of file name (gzip) */
+    COMMENT,    /* i: waiting for end of comment (gzip) */
+    HCRC,       /* i: waiting for header crc (gzip) */
+    DICTID,     /* i: waiting for dictionary check value */
+    DICT,       /* waiting for inflateSetDictionary() call */
+        TYPE,       /* i: waiting for type bits, including last-flag bit */
+        TYPEDO,     /* i: same, but skip check to exit inflate on new block */
+        STORED,     /* i: waiting for stored size (length and complement) */
+        COPY_,      /* i/o: same as COPY below, but only first time in */
+        COPY,       /* i/o: waiting for input or output to copy stored block */
+        TABLE,      /* i: waiting for dynamic block table lengths */
+        LENLENS,    /* i: waiting for code length code lengths */
+        CODELENS,   /* i: waiting for length/lit and distance code lengths */
+            LEN_,       /* i: same as LEN below, but only first time in */
+            LEN,        /* i: waiting for length/lit/eob code */
+            LENEXT,     /* i: waiting for length extra bits */
+            DIST,       /* i: waiting for distance code */
+            DISTEXT,    /* i: waiting for distance extra bits */
+            MATCH,      /* o: waiting for output space to copy string */
+            LIT,        /* o: waiting for output space to write literal */
+    CHECK,      /* i: waiting for 32-bit check value */
+    LENGTH,     /* i: waiting for 32-bit length (gzip) */
+    DONE,       /* finished check, done -- remain here until reset */
+    BAD,        /* got a data error -- remain here until reset */
+    MEM,        /* got an inflate() memory error -- remain here until reset */
+    SYNC        /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+    State transitions between above modes -
+
+    (most modes can go to BAD or MEM on error -- not shown for clarity)
+
+    Process header:
+        HEAD -> (gzip) or (zlib) or (raw)
+        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
+                  HCRC -> TYPE
+        (zlib) -> DICTID or TYPE
+        DICTID -> DICT -> TYPE
+        (raw) -> TYPEDO
+    Read deflate blocks:
+            TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
+            STORED -> COPY_ -> COPY -> TYPE
+            TABLE -> LENLENS -> CODELENS -> LEN_
+            LEN_ -> LEN
+    Read deflate codes in fixed or dynamic block:
+                LEN -> LENEXT or LIT or TYPE
+                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+                LIT -> LEN
+    Process trailer:
+        CHECK -> LENGTH -> DONE
+ */
+
+/* state maintained between inflate() calls.  Approximately 10K bytes. */
+struct inflate_state {
+    inflate_mode mode;          /* current inflate mode */
+    int last;                   /* true if processing last block */
+    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip */
+    int havedict;               /* true if dictionary provided */
+    int flags;                  /* gzip header method and flags (0 if zlib) */
+    unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
+    unsigned long check;        /* protected copy of check value */
+    unsigned long total;        /* protected copy of output count */
+    gz_headerp head;            /* where to save gzip header information */
+        /* sliding window */
+    unsigned wbits;             /* log base 2 of requested window size */
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned wnext;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if needed */
+        /* bit accumulator */
+    unsigned long hold;         /* input bit accumulator */
+    unsigned bits;              /* number of bits in "in" */
+        /* for string and stored block copying */
+    unsigned length;            /* literal or length of data to copy */
+    unsigned offset;            /* distance back to copy string from */
+        /* for table and code decoding */
+    unsigned extra;             /* extra bits needed */
+        /* fixed and dynamic code tables */
+    code const FAR *lencode;    /* starting table for length/literal codes */
+    code const FAR *distcode;   /* starting table for distance codes */
+    unsigned lenbits;           /* index bits for lencode */
+    unsigned distbits;          /* index bits for distcode */
+        /* dynamic table building */
+    unsigned ncode;             /* number of code length code lengths */
+    unsigned nlen;              /* number of length code lengths */
+    unsigned ndist;             /* number of distance code lengths */
+    unsigned have;              /* number of code lengths in lens[] */
+    code FAR *next;             /* next available space in codes[] */
+    unsigned short lens[320];   /* temporary storage for code lengths */
+    unsigned short work[288];   /* work area for code table building */
+    code codes[ENOUGH];         /* space for code tables */
+    int sane;                   /* if false, allow invalid distance too far */
+    int back;                   /* bits back of last unprocessed length/lit */
+    unsigned was;               /* initial length of match */
+};
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/inftrees.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,330 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+
+#define MAXBITS 15
+
+const char inflate_copyright[] =
+   " inflate 1.2.8 Copyright 1995-2013 Mark Adler ";
+/*
+  If you use the zlib library in a product, an acknowledgment is welcome
+  in the documentation of your product. If for some reason you cannot
+  include such an acknowledgment, I would appreciate that you keep this
+  copyright string in the executable of your product.
+ */
+
+/*
+   Build a set of tables to decode the provided canonical Huffman code.
+   The code lengths are lens[0..codes-1].  The result starts at *table,
+   whose indices are 0..2^bits-1.  work is a writable array of at least
+   lens shorts, which is used as a work area.  type is the type of code
+   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
+   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
+   on return points to the next available entry's address.  bits is the
+   requested root table index bits, and on return it is the actual root
+   table index bits.  It will differ if the request is greater than the
+   longest code or if it is less than the shortest code.
+ */
+int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short FAR *lens;
+unsigned codes;
+code FAR * FAR *table;
+unsigned FAR *bits;
+unsigned short FAR *work;
+{
+    unsigned len;               /* a code's length in bits */
+    unsigned sym;               /* index of code symbols */
+    unsigned min, max;          /* minimum and maximum code lengths */
+    unsigned root;              /* number of index bits for root table */
+    unsigned curr;              /* number of index bits for current table */
+    unsigned drop;              /* code bits to drop for sub-table */
+    int left;                   /* number of prefix codes available */
+    unsigned used;              /* code entries in table used */
+    unsigned huff;              /* Huffman code */
+    unsigned incr;              /* for incrementing code, index */
+    unsigned fill;              /* index for replicating entries */
+    unsigned low;               /* low bits for current root entry */
+    unsigned mask;              /* mask for low root bits */
+    code here;                  /* table entry for duplication */
+    code FAR *next;             /* next available space in table */
+    const unsigned short FAR *base;     /* base value table to use */
+    const unsigned short FAR *extra;    /* extra bits table to use */
+    int end;                    /* use base and extra for symbol > end */
+    unsigned short count[MAXBITS+1];    /* number of codes of each length */
+    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
+    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+        16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 78};
+    static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
+        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+        8193, 12289, 16385, 24577, 0, 0};
+    static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+        16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+        23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+        28, 28, 29, 29, 64, 64};
+
+    /*
+       Process a set of code lengths to create a canonical Huffman code.  The
+       code lengths are lens[0..codes-1].  Each length corresponds to the
+       symbols 0..codes-1.  The Huffman code is generated by first sorting the
+       symbols by length from short to long, and retaining the symbol order
+       for codes with equal lengths.  Then the code starts with all zero bits
+       for the first code of the shortest length, and the codes are integer
+       increments for the same length, and zeros are appended as the length
+       increases.  For the deflate format, these bits are stored backwards
+       from their more natural integer increment ordering, and so when the
+       decoding tables are built in the large loop below, the integer codes
+       are incremented backwards.
+
+       This routine assumes, but does not check, that all of the entries in
+       lens[] are in the range 0..MAXBITS.  The caller must assure this.
+       1..MAXBITS is interpreted as that code length.  zero means that that
+       symbol does not occur in this code.
+
+       The codes are sorted by computing a count of codes for each length,
+       creating from that a table of starting indices for each length in the
+       sorted table, and then entering the symbols in order in the sorted
+       table.  The sorted table is work[], with that space being provided by
+       the caller.
+
+       The length counts are used for other purposes as well, i.e. finding
+       the minimum and maximum length codes, determining if there are any
+       codes at all, checking for a valid set of lengths, and looking ahead
+       at length counts to determine sub-table sizes when building the
+       decoding tables.
+     */
+
+    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+    for (len = 0; len <= MAXBITS; len++)
+        count[len] = 0;
+    for (sym = 0; sym < codes; sym++)
+        count[lens[sym]]++;
+
+    /* bound code lengths, force root to be within code lengths */
+    root = *bits;
+    for (max = MAXBITS; max >= 1; max--)
+        if (count[max] != 0) break;
+    if (root > max) root = max;
+    if (max == 0) {                     /* no symbols to code at all */
+        here.op = (unsigned char)64;    /* invalid code marker */
+        here.bits = (unsigned char)1;
+        here.val = (unsigned short)0;
+        *(*table)++ = here;             /* make a table to force an error */
+        *(*table)++ = here;
+        *bits = 1;
+        return 0;     /* no symbols, but wait for decoding to report error */
+    }
+    for (min = 1; min < max; min++)
+        if (count[min] != 0) break;
+    if (root < min) root = min;
+
+    /* check for an over-subscribed or incomplete set of lengths */
+    left = 1;
+    for (len = 1; len <= MAXBITS; len++) {
+        left <<= 1;
+        left -= count[len];
+        if (left < 0) return -1;        /* over-subscribed */
+    }
+    if (left > 0 && (type == CODES || max != 1))
+        return -1;                      /* incomplete set */
+
+    /* generate offsets into symbol table for each length for sorting */
+    offs[1] = 0;
+    for (len = 1; len < MAXBITS; len++)
+        offs[len + 1] = offs[len] + count[len];
+
+    /* sort symbols by length, by symbol order within each length */
+    for (sym = 0; sym < codes; sym++)
+        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+    /*
+       Create and fill in decoding tables.  In this loop, the table being
+       filled is at next and has curr index bits.  The code being used is huff
+       with length len.  That code is converted to an index by dropping drop
+       bits off of the bottom.  For codes where len is less than drop + curr,
+       those top drop + curr - len bits are incremented through all values to
+       fill the table with replicated entries.
+
+       root is the number of index bits for the root table.  When len exceeds
+       root, sub-tables are created pointed to by the root entry with an index
+       of the low root bits of huff.  This is saved in low to check for when a
+       new sub-table should be started.  drop is zero when the root table is
+       being filled, and drop is root when sub-tables are being filled.
+
+       When a new sub-table is needed, it is necessary to look ahead in the
+       code lengths to determine what size sub-table is needed.  The length
+       counts are used for this, and so count[] is decremented as codes are
+       entered in the tables.
+
+       used keeps track of how many table entries have been allocated from the
+       provided *table space.  It is checked for LENS and DIST tables against
+       the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+       the initial root table size constants.  See the comments in inftrees.h
+       for more information.
+
+       sym increments through all symbols, and the loop terminates when
+       all codes of length max, i.e. all codes, have been processed.  This
+       routine permits incomplete codes, so another loop after this one fills
+       in the rest of the decoding tables with invalid code markers.
+     */
+
+    /* set up for code type */
+    switch (type) {
+    case CODES:
+        base = extra = work;    /* dummy value--not used */
+        end = 19;
+        break;
+    case LENS:
+        base = lbase;
+        base -= 257;
+        extra = lext;
+        extra -= 257;
+        end = 256;
+        break;
+    default:            /* DISTS */
+        base = dbase;
+        extra = dext;
+        end = -1;
+    }
+
+    /* initialize state for loop */
+    huff = 0;                   /* starting code */
+    sym = 0;                    /* starting code symbol */
+    len = min;                  /* starting code length */
+    next = *table;              /* current table to fill in */
+    curr = root;                /* current table index bits */
+    drop = 0;                   /* current bits to drop from code for index */
+    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
+    used = 1U << root;          /* use root table entries */
+    mask = used - 1;            /* mask for comparing low */
+
+    /* check available table space */
+    if ((type == LENS && used > ENOUGH_LENS) ||
+        (type == DISTS && used > ENOUGH_DISTS))
+        return 1;
+
+    /* process all codes and make table entries */
+    for (;;) {
+        /* create table entry */
+        here.bits = (unsigned char)(len - drop);
+        if ((int)(work[sym]) < end) {
+            here.op = (unsigned char)0;
+            here.val = work[sym];
+        }
+        else if ((int)(work[sym]) > end) {
+            here.op = (unsigned char)(extra[work[sym]]);
+            here.val = base[work[sym]];
+        }
+        else {
+            here.op = (unsigned char)(32 + 64);         /* end of block */
+            here.val = 0;
+        }
+
+        /* replicate for those indices with low len bits equal to huff */
+        incr = 1U << (len - drop);
+        fill = 1U << curr;
+        min = fill;                 /* save offset to next table */
+        do {
+            fill -= incr;
+            next[(huff >> drop) + fill] = here;
+        } while (fill != 0);
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+
+        /* go to next symbol, update count, len */
+        sym++;
+        if (--(count[len]) == 0) {
+            if (len == max) break;
+            len = lens[work[sym]];
+        }
+
+        /* create new sub-table if needed */
+        if (len > root && (huff & mask) != low) {
+            /* if first time, transition to sub-tables */
+            if (drop == 0)
+                drop = root;
+
+            /* increment past last table */
+            next += min;            /* here min is 1 << curr */
+
+            /* determine length of next table */
+            curr = len - drop;
+            left = (int)(1 << curr);
+            while (curr + drop < max) {
+                left -= count[curr + drop];
+                if (left <= 0) break;
+                curr++;
+                left <<= 1;
+            }
+
+            /* check for enough space */
+            used += 1U << curr;
+            if ((type == LENS && used > ENOUGH_LENS) ||
+                (type == DISTS && used > ENOUGH_DISTS))
+                return 1;
+
+            /* point entry in root table to sub-table */
+            low = huff & mask;
+            (*table)[low].op = (unsigned char)curr;
+            (*table)[low].bits = (unsigned char)root;
+            (*table)[low].val = (unsigned short)(next - *table);
+        }
+    }
+
+    /* fill in remaining table entry if code is incomplete (guaranteed to have
+       at most one remaining entry, since if the code is incomplete, the
+       maximum code length that was allowed to get this far is one bit) */
+    if (huff != 0) {
+        here.op = (unsigned char)64;            /* invalid code marker */
+        here.bits = (unsigned char)(len - drop);
+        here.val = (unsigned short)0;
+        next[huff] = here;
+    }
+
+    /* set return parameters */
+    *table += used;
+    *bits = root;
+    return 0;
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/inftrees.h	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,86 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995-2005, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables.  Each entry provides either the
+   information needed to do the operation requested by the code that
+   indexed that table entry, or it provides a pointer to another
+   table that indexes more bits of the code.  op indicates whether
+   the entry is a pointer to another table, a literal, a length or
+   distance, an end-of-block, or an invalid code.  For a table
+   pointer, the low four bits of op is the number of index bits of
+   that table.  For a length or distance, the low four bits of op
+   is the number of extra bits to get after the code.  bits is
+   the number of bits in this code or part of the code to drop off
+   of the bit buffer.  val is the actual byte to output in the case
+   of a literal, the base length or distance, or the offset from
+   the current table to the next table.  Each entry is four bytes. */
+typedef struct {
+    unsigned char op;           /* operation, extra bits, table bits */
+    unsigned char bits;         /* bits in this part of the code */
+    unsigned short val;         /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+    00000000 - literal
+    0000tttt - table link, tttt != 0 is the number of table index bits
+    0001eeee - length or distance, eeee is the number of extra bits
+    01100000 - end of block
+    01000000 - invalid code
+ */
+
+/* Maximum size of the dynamic table.  The maximum number of code structures is
+   1444, which is the sum of 852 for literal/length codes and 592 for distance
+   codes.  These values were found by exhaustive searches using the program
+   examples/enough.c found in the zlib distribtution.  The arguments to that
+   program are the number of symbols, the initial root table size, and the
+   maximum bit length of a code.  "enough 286 9 15" for literal/length codes
+   returns returns 852, and "enough 30 6 15" for distance codes returns 592.
+   The initial root table size (9 or 6) is found in the fifth argument of the
+   inflate_table() calls in inflate.c and infback.c.  If the root table size is
+   changed, then these maximum sizes would be need to be recalculated and
+   updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 592
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
+
+/* Type of code to build for inflate_table() */
+typedef enum {
+    CODES,
+    LENS,
+    DISTS
+} codetype;
+
+int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
+                             unsigned codes, code FAR * FAR *table,
+                             unsigned FAR *bits, unsigned short FAR *work));
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/patches/ChangeLog_java	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,10 @@
+(1)renamed
+   adler32.c -> zadler32.c
+   zcrc32c -> zcrc32.c
+
+(2)added _LP64 to make uLong a 32-bit int on 64-bit platform
+   zconf.h:
+   uLong -> 32-bit int
+
+(3)updated crc32.c/crc32()
+   unsigned long      -> uLong
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/trees.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,1250 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* trees.c -- output deflated data using Huffman coding
+ * Copyright (C) 1995-2012 Jean-loup Gailly
+ * detect_data_type() function provided freely by Cosmin Truta, 2006
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ *  ALGORITHM
+ *
+ *      The "deflation" process uses several Huffman trees. The more
+ *      common source values are represented by shorter bit sequences.
+ *
+ *      Each code tree is stored in a compressed form which is itself
+ * a Huffman encoding of the lengths of all the code strings (in
+ * ascending order by source values).  The actual code strings are
+ * reconstructed from the lengths in the inflate process, as described
+ * in the deflate specification.
+ *
+ *  REFERENCES
+ *
+ *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
+ *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
+ *
+ *      Storer, James A.
+ *          Data Compression:  Methods and Theory, pp. 49-50.
+ *          Computer Science Press, 1988.  ISBN 0-7167-8156-5.
+ *
+ *      Sedgewick, R.
+ *          Algorithms, p290.
+ *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
+ */
+
+/* @(#) $Id$ */
+
+/* #define GEN_TREES_H */
+
+#include "deflate.h"
+
+#ifdef DEBUG
+#  include <ctype.h>
+#endif
+
+/* ===========================================================================
+ * Constants
+ */
+
+#define MAX_BL_BITS 7
+/* Bit length codes must not exceed MAX_BL_BITS bits */
+
+#define END_BLOCK 256
+/* end of block literal code */
+
+#define REP_3_6      16
+/* repeat previous bit length 3-6 times (2 bits of repeat count) */
+
+#define REPZ_3_10    17
+/* repeat a zero length 3-10 times  (3 bits of repeat count) */
+
+#define REPZ_11_138  18
+/* repeat a zero length 11-138 times  (7 bits of repeat count) */
+
+local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
+   = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
+
+local const int extra_dbits[D_CODES] /* extra bits for each distance code */
+   = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
+
+local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
+   = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
+
+local const uch bl_order[BL_CODES]
+   = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
+/* The lengths of the bit length codes are sent in order of decreasing
+ * probability, to avoid transmitting the lengths for unused bit length codes.
+ */
+
+/* ===========================================================================
+ * Local data. These are initialized only once.
+ */
+
+#define DIST_CODE_LEN  512 /* see definition of array dist_code below */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+/* non ANSI compilers may not accept trees.h */
+
+local ct_data static_ltree[L_CODES+2];
+/* The static literal tree. Since the bit lengths are imposed, there is no
+ * need for the L_CODES extra codes used during heap construction. However
+ * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
+ * below).
+ */
+
+local ct_data static_dtree[D_CODES];
+/* The static distance tree. (Actually a trivial tree since all codes use
+ * 5 bits.)
+ */
+
+uch _dist_code[DIST_CODE_LEN];
+/* Distance codes. The first 256 values correspond to the distances
+ * 3 .. 258, the last 256 values correspond to the top 8 bits of
+ * the 15 bit distances.
+ */
+
+uch _length_code[MAX_MATCH-MIN_MATCH+1];
+/* length code for each normalized match length (0 == MIN_MATCH) */
+
+local int base_length[LENGTH_CODES];
+/* First normalized length for each code (0 = MIN_MATCH) */
+
+local int base_dist[D_CODES];
+/* First normalized distance for each code (0 = distance of 1) */
+
+#else
+#  include "trees.h"
+#endif /* GEN_TREES_H */
+
+struct static_tree_desc_s {
+    const ct_data *static_tree;  /* static tree or NULL */
+    const intf *extra_bits;      /* extra bits for each code or NULL */
+    int     extra_base;          /* base index for extra_bits */
+    int     elems;               /* max number of elements in the tree */
+    int     max_length;          /* max bit length for the codes */
+};
+
+local static_tree_desc  static_l_desc =
+{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
+
+local static_tree_desc  static_d_desc =
+{static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
+
+local static_tree_desc  static_bl_desc =
+{(const ct_data *)0, extra_blbits, 0,   BL_CODES, MAX_BL_BITS};
+
+/* ===========================================================================
+ * Local (static) routines in this file.
+ */
+
+local void tr_static_init OF((void));
+local void init_block     OF((deflate_state *s));
+local void pqdownheap     OF((deflate_state *s, ct_data *tree, int k));
+local void gen_bitlen     OF((deflate_state *s, tree_desc *desc));
+local void gen_codes      OF((ct_data *tree, int max_code, ushf *bl_count));
+local void build_tree     OF((deflate_state *s, tree_desc *desc));
+local void scan_tree      OF((deflate_state *s, ct_data *tree, int max_code));
+local void send_tree      OF((deflate_state *s, ct_data *tree, int max_code));
+local int  build_bl_tree  OF((deflate_state *s));
+local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
+                              int blcodes));
+local void compress_block OF((deflate_state *s, const ct_data *ltree,
+                              const ct_data *dtree));
+local int  detect_data_type OF((deflate_state *s));
+local unsigned bi_reverse OF((unsigned value, int length));
+local void bi_windup      OF((deflate_state *s));
+local void bi_flush       OF((deflate_state *s));
+local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
+                              int header));
+
+#ifdef GEN_TREES_H
+local void gen_trees_header OF((void));
+#endif
+
+#ifndef DEBUG
+#  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
+   /* Send a code of the given tree. c and tree must not have side effects */
+
+#else /* DEBUG */
+#  define send_code(s, c, tree) \
+     { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
+       send_bits(s, tree[c].Code, tree[c].Len); }
+#endif
+
+/* ===========================================================================
+ * Output a short LSB first on the stream.
+ * IN assertion: there is enough room in pendingBuf.
+ */
+#define put_short(s, w) { \
+    put_byte(s, (uch)((w) & 0xff)); \
+    put_byte(s, (uch)((ush)(w) >> 8)); \
+}
+
+/* ===========================================================================
+ * Send a value on a given number of bits.
+ * IN assertion: length <= 16 and value fits in length bits.
+ */
+#ifdef DEBUG
+local void send_bits      OF((deflate_state *s, int value, int length));
+
+local void send_bits(s, value, length)
+    deflate_state *s;
+    int value;  /* value to send */
+    int length; /* number of bits */
+{
+    Tracevv((stderr," l %2d v %4x ", length, value));
+    Assert(length > 0 && length <= 15, "invalid length");
+    s->bits_sent += (ulg)length;
+
+    /* If not enough room in bi_buf, use (valid) bits from bi_buf and
+     * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
+     * unused bits in value.
+     */
+    if (s->bi_valid > (int)Buf_size - length) {
+        s->bi_buf |= (ush)value << s->bi_valid;
+        put_short(s, s->bi_buf);
+        s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
+        s->bi_valid += length - Buf_size;
+    } else {
+        s->bi_buf |= (ush)value << s->bi_valid;
+        s->bi_valid += length;
+    }
+}
+#else /* !DEBUG */
+
+#define send_bits(s, value, length) \
+{ int len = length;\
+  if (s->bi_valid > (int)Buf_size - len) {\
+    int val = value;\
+    s->bi_buf |= (ush)val << s->bi_valid;\
+    put_short(s, s->bi_buf);\
+    s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
+    s->bi_valid += len - Buf_size;\
+  } else {\
+    s->bi_buf |= (ush)(value) << s->bi_valid;\
+    s->bi_valid += len;\
+  }\
+}
+#endif /* DEBUG */
+
+
+/* the arguments must not have side effects */
+
+/* ===========================================================================
+ * Initialize the various 'constant' tables.
+ */
+local void tr_static_init()
+{
+#if defined(GEN_TREES_H) || !defined(STDC)
+    static int static_init_done = 0;
+    int n;        /* iterates over tree elements */
+    int bits;     /* bit counter */
+    int length;   /* length value */
+    int code;     /* code value */
+    int dist;     /* distance index */
+    ush bl_count[MAX_BITS+1];
+    /* number of codes at each bit length for an optimal tree */
+
+    if (static_init_done) return;
+
+    /* For some embedded targets, global variables are not initialized: */
+#ifdef NO_INIT_GLOBAL_POINTERS
+    static_l_desc.static_tree = static_ltree;
+    static_l_desc.extra_bits = extra_lbits;
+    static_d_desc.static_tree = static_dtree;
+    static_d_desc.extra_bits = extra_dbits;
+    static_bl_desc.extra_bits = extra_blbits;
+#endif
+
+    /* Initialize the mapping length (0..255) -> length code (0..28) */
+    length = 0;
+    for (code = 0; code < LENGTH_CODES-1; code++) {
+        base_length[code] = length;
+        for (n = 0; n < (1<<extra_lbits[code]); n++) {
+            _length_code[length++] = (uch)code;
+        }
+    }
+    Assert (length == 256, "tr_static_init: length != 256");
+    /* Note that the length 255 (match length 258) can be represented
+     * in two different ways: code 284 + 5 bits or code 285, so we
+     * overwrite length_code[255] to use the best encoding:
+     */
+    _length_code[length-1] = (uch)code;
+
+    /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
+    dist = 0;
+    for (code = 0 ; code < 16; code++) {
+        base_dist[code] = dist;
+        for (n = 0; n < (1<<extra_dbits[code]); n++) {
+            _dist_code[dist++] = (uch)code;
+        }
+    }
+    Assert (dist == 256, "tr_static_init: dist != 256");
+    dist >>= 7; /* from now on, all distances are divided by 128 */
+    for ( ; code < D_CODES; code++) {
+        base_dist[code] = dist << 7;
+        for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
+            _dist_code[256 + dist++] = (uch)code;
+        }
+    }
+    Assert (dist == 256, "tr_static_init: 256+dist != 512");
+
+    /* Construct the codes of the static literal tree */
+    for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
+    n = 0;
+    while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
+    while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
+    while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
+    while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
+    /* Codes 286 and 287 do not exist, but we must include them in the
+     * tree construction to get a canonical Huffman tree (longest code
+     * all ones)
+     */
+    gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
+
+    /* The static distance tree is trivial: */
+    for (n = 0; n < D_CODES; n++) {
+        static_dtree[n].Len = 5;
+        static_dtree[n].Code = bi_reverse((unsigned)n, 5);
+    }
+    static_init_done = 1;
+
+#  ifdef GEN_TREES_H
+    gen_trees_header();
+#  endif
+#endif /* defined(GEN_TREES_H) || !defined(STDC) */
+}
+
+/* ===========================================================================
+ * Genererate the file trees.h describing the static trees.
+ */
+#ifdef GEN_TREES_H
+#  ifndef DEBUG
+#    include <stdio.h>
+#  endif
+
+#  define SEPARATOR(i, last, width) \
+      ((i) == (last)? "\n};\n\n" :    \
+       ((i) % (width) == (width)-1 ? ",\n" : ", "))
+
+void gen_trees_header()
+{
+    FILE *header = fopen("trees.h", "w");
+    int i;
+
+    Assert (header != NULL, "Can't open trees.h");
+    fprintf(header,
+            "/* header created automatically with -DGEN_TREES_H */\n\n");
+
+    fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
+    for (i = 0; i < L_CODES+2; i++) {
+        fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
+                static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
+    }
+
+    fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+        fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
+                static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
+    }
+
+    fprintf(header, "const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {\n");
+    for (i = 0; i < DIST_CODE_LEN; i++) {
+        fprintf(header, "%2u%s", _dist_code[i],
+                SEPARATOR(i, DIST_CODE_LEN-1, 20));
+    }
+
+    fprintf(header,
+        "const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+    for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
+        fprintf(header, "%2u%s", _length_code[i],
+                SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
+    }
+
+    fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
+    for (i = 0; i < LENGTH_CODES; i++) {
+        fprintf(header, "%1u%s", base_length[i],
+                SEPARATOR(i, LENGTH_CODES-1, 20));
+    }
+
+    fprintf(header, "local const int base_dist[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+        fprintf(header, "%5u%s", base_dist[i],
+                SEPARATOR(i, D_CODES-1, 10));
+    }
+
+    fclose(header);
+}
+#endif /* GEN_TREES_H */
+
+/* ===========================================================================
+ * Initialize the tree data structures for a new zlib stream.
+ */
+void ZLIB_INTERNAL _tr_init(s)
+    deflate_state *s;
+{
+    tr_static_init();
+
+    s->l_desc.dyn_tree = s->dyn_ltree;
+    s->l_desc.stat_desc = &static_l_desc;
+
+    s->d_desc.dyn_tree = s->dyn_dtree;
+    s->d_desc.stat_desc = &static_d_desc;
+
+    s->bl_desc.dyn_tree = s->bl_tree;
+    s->bl_desc.stat_desc = &static_bl_desc;
+
+    s->bi_buf = 0;
+    s->bi_valid = 0;
+#ifdef DEBUG
+    s->compressed_len = 0L;
+    s->bits_sent = 0L;
+#endif
+
+    /* Initialize the first block of the first file: */
+    init_block(s);
+}
+
+/* ===========================================================================
+ * Initialize a new block.
+ */
+local void init_block(s)
+    deflate_state *s;
+{
+    int n; /* iterates over tree elements */
+
+    /* Initialize the trees. */
+    for (n = 0; n < L_CODES;  n++) s->dyn_ltree[n].Freq = 0;
+    for (n = 0; n < D_CODES;  n++) s->dyn_dtree[n].Freq = 0;
+    for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
+
+    s->dyn_ltree[END_BLOCK].Freq = 1;
+    s->opt_len = s->static_len = 0L;
+    s->last_lit = s->matches = 0;
+}
+
+#define SMALLEST 1
+/* Index within the heap array of least frequent node in the Huffman tree */
+
+
+/* ===========================================================================
+ * Remove the smallest element from the heap and recreate the heap with
+ * one less element. Updates heap and heap_len.
+ */
+#define pqremove(s, tree, top) \
+{\
+    top = s->heap[SMALLEST]; \
+    s->heap[SMALLEST] = s->heap[s->heap_len--]; \
+    pqdownheap(s, tree, SMALLEST); \
+}
+
+/* ===========================================================================
+ * Compares to subtrees, using the tree depth as tie breaker when
+ * the subtrees have equal frequency. This minimizes the worst case length.
+ */
+#define smaller(tree, n, m, depth) \
+   (tree[n].Freq < tree[m].Freq || \
+   (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
+
+/* ===========================================================================
+ * Restore the heap property by moving down the tree starting at node k,
+ * exchanging a node with the smallest of its two sons if necessary, stopping
+ * when the heap property is re-established (each father smaller than its
+ * two sons).
+ */
+local void pqdownheap(s, tree, k)
+    deflate_state *s;
+    ct_data *tree;  /* the tree to restore */
+    int k;               /* node to move down */
+{
+    int v = s->heap[k];
+    int j = k << 1;  /* left son of k */
+    while (j <= s->heap_len) {
+        /* Set j to the smallest of the two sons: */
+        if (j < s->heap_len &&
+            smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
+            j++;
+        }
+        /* Exit if v is smaller than both sons */
+        if (smaller(tree, v, s->heap[j], s->depth)) break;
+
+        /* Exchange v with the smallest son */
+        s->heap[k] = s->heap[j];  k = j;
+
+        /* And continue down the tree, setting j to the left son of k */
+        j <<= 1;
+    }
+    s->heap[k] = v;
+}
+
+/* ===========================================================================
+ * Compute the optimal bit lengths for a tree and update the total bit length
+ * for the current block.
+ * IN assertion: the fields freq and dad are set, heap[heap_max] and
+ *    above are the tree nodes sorted by increasing frequency.
+ * OUT assertions: the field len is set to the optimal bit length, the
+ *     array bl_count contains the frequencies for each bit length.
+ *     The length opt_len is updated; static_len is also updated if stree is
+ *     not null.
+ */
+local void gen_bitlen(s, desc)
+    deflate_state *s;
+    tree_desc *desc;    /* the tree descriptor */
+{
+    ct_data *tree        = desc->dyn_tree;
+    int max_code         = desc->max_code;
+    const ct_data *stree = desc->stat_desc->static_tree;
+    const intf *extra    = desc->stat_desc->extra_bits;
+    int base             = desc->stat_desc->extra_base;
+    int max_length       = desc->stat_desc->max_length;
+    int h;              /* heap index */
+    int n, m;           /* iterate over the tree elements */
+    int bits;           /* bit length */
+    int xbits;          /* extra bits */
+    ush f;              /* frequency */
+    int overflow = 0;   /* number of elements with bit length too large */
+
+    for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
+
+    /* In a first pass, compute the optimal bit lengths (which may
+     * overflow in the case of the bit length tree).
+     */
+    tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
+
+    for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
+        n = s->heap[h];
+        bits = tree[tree[n].Dad].Len + 1;
+        if (bits > max_length) bits = max_length, overflow++;
+        tree[n].Len = (ush)bits;
+        /* We overwrite tree[n].Dad which is no longer needed */
+
+        if (n > max_code) continue; /* not a leaf node */
+
+        s->bl_count[bits]++;
+        xbits = 0;
+        if (n >= base) xbits = extra[n-base];
+        f = tree[n].Freq;
+        s->opt_len += (ulg)f * (bits + xbits);
+        if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
+    }
+    if (overflow == 0) return;
+
+    Trace((stderr,"\nbit length overflow\n"));
+    /* This happens for example on obj2 and pic of the Calgary corpus */
+
+    /* Find the first bit length which could increase: */
+    do {
+        bits = max_length-1;
+        while (s->bl_count[bits] == 0) bits--;
+        s->bl_count[bits]--;      /* move one leaf down the tree */
+        s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
+        s->bl_count[max_length]--;
+        /* The brother of the overflow item also moves one step up,
+         * but this does not affect bl_count[max_length]
+         */
+        overflow -= 2;
+    } while (overflow > 0);
+
+    /* Now recompute all bit lengths, scanning in increasing frequency.
+     * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
+     * lengths instead of fixing only the wrong ones. This idea is taken
+     * from 'ar' written by Haruhiko Okumura.)
+     */
+    for (bits = max_length; bits != 0; bits--) {
+        n = s->bl_count[bits];
+        while (n != 0) {
+            m = s->heap[--h];
+            if (m > max_code) continue;
+            if ((unsigned) tree[m].Len != (unsigned) bits) {
+                Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
+                s->opt_len += ((long)bits - (long)tree[m].Len)
+                              *(long)tree[m].Freq;
+                tree[m].Len = (ush)bits;
+            }
+            n--;
+        }
+    }
+}
+
+/* ===========================================================================
+ * Generate the codes for a given tree and bit counts (which need not be
+ * optimal).
+ * IN assertion: the array bl_count contains the bit length statistics for
+ * the given tree and the field len is set for all tree elements.
+ * OUT assertion: the field code is set for all tree elements of non
+ *     zero code length.
+ */
+local void gen_codes (tree, max_code, bl_count)
+    ct_data *tree;             /* the tree to decorate */
+    int max_code;              /* largest code with non zero frequency */
+    ushf *bl_count;            /* number of codes at each bit length */
+{
+    ush next_code[MAX_BITS+1]; /* next code value for each bit length */
+    ush code = 0;              /* running code value */
+    int bits;                  /* bit index */
+    int n;                     /* code index */
+
+    /* The distribution counts are first used to generate the code values
+     * without bit reversal.
+     */
+    for (bits = 1; bits <= MAX_BITS; bits++) {
+        next_code[bits] = code = (code + bl_count[bits-1]) << 1;
+    }
+    /* Check that the bit counts in bl_count are consistent. The last code
+     * must be all ones.
+     */
+    Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
+            "inconsistent bit counts");
+    Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
+
+    for (n = 0;  n <= max_code; n++) {
+        int len = tree[n].Len;
+        if (len == 0) continue;
+        /* Now reverse the bits */
+        tree[n].Code = bi_reverse(next_code[len]++, len);
+
+        Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
+             n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
+    }
+}
+
+/* ===========================================================================
+ * Construct one Huffman tree and assigns the code bit strings and lengths.
+ * Update the total bit length for the current block.
+ * IN assertion: the field freq is set for all tree elements.
+ * OUT assertions: the fields len and code are set to the optimal bit length
+ *     and corresponding code. The length opt_len is updated; static_len is
+ *     also updated if stree is not null. The field max_code is set.
+ */
+local void build_tree(s, desc)
+    deflate_state *s;
+    tree_desc *desc; /* the tree descriptor */
+{
+    ct_data *tree         = desc->dyn_tree;
+    const ct_data *stree  = desc->stat_desc->static_tree;
+    int elems             = desc->stat_desc->elems;
+    int n, m;          /* iterate over heap elements */
+    int max_code = -1; /* largest code with non zero frequency */
+    int node;          /* new node being created */
+
+    /* Construct the initial heap, with least frequent element in
+     * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
+     * heap[0] is not used.
+     */
+    s->heap_len = 0, s->heap_max = HEAP_SIZE;
+
+    for (n = 0; n < elems; n++) {
+        if (tree[n].Freq != 0) {
+            s->heap[++(s->heap_len)] = max_code = n;
+            s->depth[n] = 0;
+        } else {
+            tree[n].Len = 0;
+        }
+    }
+
+    /* The pkzip format requires that at least one distance code exists,
+     * and that at least one bit should be sent even if there is only one
+     * possible code. So to avoid special checks later on we force at least
+     * two codes of non zero frequency.
+     */
+    while (s->heap_len < 2) {
+        node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
+        tree[node].Freq = 1;
+        s->depth[node] = 0;
+        s->opt_len--; if (stree) s->static_len -= stree[node].Len;
+        /* node is 0 or 1 so it does not have extra bits */
+    }
+    desc->max_code = max_code;
+
+    /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
+     * establish sub-heaps of increasing lengths:
+     */
+    for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
+
+    /* Construct the Huffman tree by repeatedly combining the least two
+     * frequent nodes.
+     */
+    node = elems;              /* next internal node of the tree */
+    do {
+        pqremove(s, tree, n);  /* n = node of least frequency */
+        m = s->heap[SMALLEST]; /* m = node of next least frequency */
+
+        s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
+        s->heap[--(s->heap_max)] = m;
+
+        /* Create a new node father of n and m */
+        tree[node].Freq = tree[n].Freq + tree[m].Freq;
+        s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ?
+                                s->depth[n] : s->depth[m]) + 1);
+        tree[n].Dad = tree[m].Dad = (ush)node;
+#ifdef DUMP_BL_TREE
+        if (tree == s->bl_tree) {
+            fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
+                    node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
+        }
+#endif
+        /* and insert the new node in the heap */
+        s->heap[SMALLEST] = node++;
+        pqdownheap(s, tree, SMALLEST);
+
+    } while (s->heap_len >= 2);
+
+    s->heap[--(s->heap_max)] = s->heap[SMALLEST];
+
+    /* At this point, the fields freq and dad are set. We can now
+     * generate the bit lengths.
+     */
+    gen_bitlen(s, (tree_desc *)desc);
+
+    /* The field len is now set, we can generate the bit codes */
+    gen_codes ((ct_data *)tree, max_code, s->bl_count);
+}
+
+/* ===========================================================================
+ * Scan a literal or distance tree to determine the frequencies of the codes
+ * in the bit length tree.
+ */
+local void scan_tree (s, tree, max_code)
+    deflate_state *s;
+    ct_data *tree;   /* the tree to be scanned */
+    int max_code;    /* and its largest code of non zero frequency */
+{
+    int n;                     /* iterates over all tree elements */
+    int prevlen = -1;          /* last emitted length */
+    int curlen;                /* length of current code */
+    int nextlen = tree[0].Len; /* length of next code */
+    int count = 0;             /* repeat count of the current code */
+    int max_count = 7;         /* max repeat count */
+    int min_count = 4;         /* min repeat count */
+
+    if (nextlen == 0) max_count = 138, min_count = 3;
+    tree[max_code+1].Len = (ush)0xffff; /* guard */
+
+    for (n = 0; n <= max_code; n++) {
+        curlen = nextlen; nextlen = tree[n+1].Len;
+        if (++count < max_count && curlen == nextlen) {
+            continue;
+        } else if (count < min_count) {
+            s->bl_tree[curlen].Freq += count;
+        } else if (curlen != 0) {
+            if (curlen != prevlen) s->bl_tree[curlen].Freq++;
+            s->bl_tree[REP_3_6].Freq++;
+        } else if (count <= 10) {
+            s->bl_tree[REPZ_3_10].Freq++;
+        } else {
+            s->bl_tree[REPZ_11_138].Freq++;
+        }
+        count = 0; prevlen = curlen;
+        if (nextlen == 0) {
+            max_count = 138, min_count = 3;
+        } else if (curlen == nextlen) {
+            max_count = 6, min_count = 3;
+        } else {
+            max_count = 7, min_count = 4;
+        }
+    }
+}
+
+/* ===========================================================================
+ * Send a literal or distance tree in compressed form, using the codes in
+ * bl_tree.
+ */
+local void send_tree (s, tree, max_code)
+    deflate_state *s;
+    ct_data *tree; /* the tree to be scanned */
+    int max_code;       /* and its largest code of non zero frequency */
+{
+    int n;                     /* iterates over all tree elements */
+    int prevlen = -1;          /* last emitted length */
+    int curlen;                /* length of current code */
+    int nextlen = tree[0].Len; /* length of next code */
+    int count = 0;             /* repeat count of the current code */
+    int max_count = 7;         /* max repeat count */
+    int min_count = 4;         /* min repeat count */
+
+    /* tree[max_code+1].Len = -1; */  /* guard already set */
+    if (nextlen == 0) max_count = 138, min_count = 3;
+
+    for (n = 0; n <= max_code; n++) {
+        curlen = nextlen; nextlen = tree[n+1].Len;
+        if (++count < max_count && curlen == nextlen) {
+            continue;
+        } else if (count < min_count) {
+            do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
+
+        } else if (curlen != 0) {
+            if (curlen != prevlen) {
+                send_code(s, curlen, s->bl_tree); count--;
+            }
+            Assert(count >= 3 && count <= 6, " 3_6?");
+            send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
+
+        } else if (count <= 10) {
+            send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
+
+        } else {
+            send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
+        }
+        count = 0; prevlen = curlen;
+        if (nextlen == 0) {
+            max_count = 138, min_count = 3;
+        } else if (curlen == nextlen) {
+            max_count = 6, min_count = 3;
+        } else {
+            max_count = 7, min_count = 4;
+        }
+    }
+}
+
+/* ===========================================================================
+ * Construct the Huffman tree for the bit lengths and return the index in
+ * bl_order of the last bit length code to send.
+ */
+local int build_bl_tree(s)
+    deflate_state *s;
+{
+    int max_blindex;  /* index of last bit length code of non zero freq */
+
+    /* Determine the bit length frequencies for literal and distance trees */
+    scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
+    scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
+
+    /* Build the bit length tree: */
+    build_tree(s, (tree_desc *)(&(s->bl_desc)));
+    /* opt_len now includes the length of the tree representations, except
+     * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
+     */
+
+    /* Determine the number of bit length codes to send. The pkzip format
+     * requires that at least 4 bit length codes be sent. (appnote.txt says
+     * 3 but the actual value used is 4.)
+     */
+    for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
+        if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
+    }
+    /* Update opt_len to include the bit length tree and counts */
+    s->opt_len += 3*(max_blindex+1) + 5+5+4;
+    Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
+            s->opt_len, s->static_len));
+
+    return max_blindex;
+}
+
+/* ===========================================================================
+ * Send the header for a block using dynamic Huffman trees: the counts, the
+ * lengths of the bit length codes, the literal tree and the distance tree.
+ * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
+ */
+local void send_all_trees(s, lcodes, dcodes, blcodes)
+    deflate_state *s;
+    int lcodes, dcodes, blcodes; /* number of codes for each tree */
+{
+    int rank;                    /* index in bl_order */
+
+    Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
+    Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
+            "too many codes");
+    Tracev((stderr, "\nbl counts: "));
+    send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
+    send_bits(s, dcodes-1,   5);
+    send_bits(s, blcodes-4,  4); /* not -3 as stated in appnote.txt */
+    for (rank = 0; rank < blcodes; rank++) {
+        Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
+        send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
+    }
+    Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
+
+    send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
+    Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
+
+    send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
+    Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
+}
+
+/* ===========================================================================
+ * Send a stored block
+ */
+void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
+    deflate_state *s;
+    charf *buf;       /* input block */
+    ulg stored_len;   /* length of input block */
+    int last;         /* one if this is the last block for a file */
+{
+    send_bits(s, (STORED_BLOCK<<1)+last, 3);    /* send block type */
+#ifdef DEBUG
+    s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
+    s->compressed_len += (stored_len + 4) << 3;
+#endif
+    copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
+}
+
+/* ===========================================================================
+ * Flush the bits in the bit buffer to pending output (leaves at most 7 bits)
+ */
+void ZLIB_INTERNAL _tr_flush_bits(s)
+    deflate_state *s;
+{
+    bi_flush(s);
+}
+
+/* ===========================================================================
+ * Send one empty static block to give enough lookahead for inflate.
+ * This takes 10 bits, of which 7 may remain in the bit buffer.
+ */
+void ZLIB_INTERNAL _tr_align(s)
+    deflate_state *s;
+{
+    send_bits(s, STATIC_TREES<<1, 3);
+    send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
+    s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
+#endif
+    bi_flush(s);
+}
+
+/* ===========================================================================
+ * Determine the best encoding for the current block: dynamic trees, static
+ * trees or store, and output the encoded block to the zip file.
+ */
+void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
+    deflate_state *s;
+    charf *buf;       /* input block, or NULL if too old */
+    ulg stored_len;   /* length of input block */
+    int last;         /* one if this is the last block for a file */
+{
+    ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
+    int max_blindex = 0;  /* index of last bit length code of non zero freq */
+
+    /* Build the Huffman trees unless a stored block is forced */
+    if (s->level > 0) {
+
+        /* Check if the file is binary or text */
+        if (s->strm->data_type == Z_UNKNOWN)
+            s->strm->data_type = detect_data_type(s);
+
+        /* Construct the literal and distance trees */
+        build_tree(s, (tree_desc *)(&(s->l_desc)));
+        Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
+                s->static_len));
+
+        build_tree(s, (tree_desc *)(&(s->d_desc)));
+        Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
+                s->static_len));
+        /* At this point, opt_len and static_len are the total bit lengths of
+         * the compressed block data, excluding the tree representations.
+         */
+
+        /* Build the bit length tree for the above two trees, and get the index
+         * in bl_order of the last bit length code to send.
+         */
+        max_blindex = build_bl_tree(s);
+
+        /* Determine the best encoding. Compute the block lengths in bytes. */
+        opt_lenb = (s->opt_len+3+7)>>3;
+        static_lenb = (s->static_len+3+7)>>3;
+
+        Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
+                opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
+                s->last_lit));
+
+        if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
+
+    } else {
+        Assert(buf != (char*)0, "lost buf");
+        opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
+    }
+
+#ifdef FORCE_STORED
+    if (buf != (char*)0) { /* force stored block */
+#else
+    if (stored_len+4 <= opt_lenb && buf != (char*)0) {
+                       /* 4: two words for the lengths */
+#endif
+        /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
+         * Otherwise we can't have processed more than WSIZE input bytes since
+         * the last block flush, because compression would have been
+         * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
+         * transform a block into a stored block.
+         */
+        _tr_stored_block(s, buf, stored_len, last);
+
+#ifdef FORCE_STATIC
+    } else if (static_lenb >= 0) { /* force static trees */
+#else
+    } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) {
+#endif
+        send_bits(s, (STATIC_TREES<<1)+last, 3);
+        compress_block(s, (const ct_data *)static_ltree,
+                       (const ct_data *)static_dtree);
+#ifdef DEBUG
+        s->compressed_len += 3 + s->static_len;
+#endif
+    } else {
+        send_bits(s, (DYN_TREES<<1)+last, 3);
+        send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
+                       max_blindex+1);
+        compress_block(s, (const ct_data *)s->dyn_ltree,
+                       (const ct_data *)s->dyn_dtree);
+#ifdef DEBUG
+        s->compressed_len += 3 + s->opt_len;
+#endif
+    }
+    Assert (s->compressed_len == s->bits_sent, "bad compressed size");
+    /* The above check is made mod 2^32, for files larger than 512 MB
+     * and uLong implemented on 32 bits.
+     */
+    init_block(s);
+
+    if (last) {
+        bi_windup(s);
+#ifdef DEBUG
+        s->compressed_len += 7;  /* align on byte boundary */
+#endif
+    }
+    Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
+           s->compressed_len-7*last));
+}
+
+/* ===========================================================================
+ * Save the match info and tally the frequency counts. Return true if
+ * the current block must be flushed.
+ */
+int ZLIB_INTERNAL _tr_tally (s, dist, lc)
+    deflate_state *s;
+    unsigned dist;  /* distance of matched string */
+    unsigned lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
+{
+    s->d_buf[s->last_lit] = (ush)dist;
+    s->l_buf[s->last_lit++] = (uch)lc;
+    if (dist == 0) {
+        /* lc is the unmatched char */
+        s->dyn_ltree[lc].Freq++;
+    } else {
+        s->matches++;
+        /* Here, lc is the match length - MIN_MATCH */
+        dist--;             /* dist = match distance - 1 */
+        Assert((ush)dist < (ush)MAX_DIST(s) &&
+               (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
+               (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
+
+        s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
+        s->dyn_dtree[d_code(dist)].Freq++;
+    }
+
+#ifdef TRUNCATE_BLOCK
+    /* Try to guess if it is profitable to stop the current block here */
+    if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
+        /* Compute an upper bound for the compressed length */
+        ulg out_length = (ulg)s->last_lit*8L;
+        ulg in_length = (ulg)((long)s->strstart - s->block_start);
+        int dcode;
+        for (dcode = 0; dcode < D_CODES; dcode++) {
+            out_length += (ulg)s->dyn_dtree[dcode].Freq *
+                (5L+extra_dbits[dcode]);
+        }
+        out_length >>= 3;
+        Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
+               s->last_lit, in_length, out_length,
+               100L - out_length*100L/in_length));
+        if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
+    }
+#endif
+    return (s->last_lit == s->lit_bufsize-1);
+    /* We avoid equality with lit_bufsize because of wraparound at 64K
+     * on 16 bit machines and because stored blocks are restricted to
+     * 64K-1 bytes.
+     */
+}
+
+/* ===========================================================================
+ * Send the block data compressed using the given Huffman trees
+ */
+local void compress_block(s, ltree, dtree)
+    deflate_state *s;
+    const ct_data *ltree; /* literal tree */
+    const ct_data *dtree; /* distance tree */
+{
+    unsigned dist;      /* distance of matched string */
+    int lc;             /* match length or unmatched char (if dist == 0) */
+    unsigned lx = 0;    /* running index in l_buf */
+    unsigned code;      /* the code to send */
+    int extra;          /* number of extra bits to send */
+
+    if (s->last_lit != 0) do {
+        dist = s->d_buf[lx];
+        lc = s->l_buf[lx++];
+        if (dist == 0) {
+            send_code(s, lc, ltree); /* send a literal byte */
+            Tracecv(isgraph(lc), (stderr," '%c' ", lc));
+        } else {
+            /* Here, lc is the match length - MIN_MATCH */
+            code = _length_code[lc];
+            send_code(s, code+LITERALS+1, ltree); /* send the length code */
+            extra = extra_lbits[code];
+            if (extra != 0) {
+                lc -= base_length[code];
+                send_bits(s, lc, extra);       /* send the extra length bits */
+            }
+            dist--; /* dist is now the match distance - 1 */
+            code = d_code(dist);
+            Assert (code < D_CODES, "bad d_code");
+
+            send_code(s, code, dtree);       /* send the distance code */
+            extra = extra_dbits[code];
+            if (extra != 0) {
+                dist -= base_dist[code];
+                send_bits(s, dist, extra);   /* send the extra distance bits */
+            }
+        } /* literal or match pair ? */
+
+        /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
+        Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx,
+               "pendingBuf overflow");
+
+    } while (lx < s->last_lit);
+
+    send_code(s, END_BLOCK, ltree);
+}
+
+/* ===========================================================================
+ * Check if the data type is TEXT or BINARY, using the following algorithm:
+ * - TEXT if the two conditions below are satisfied:
+ *    a) There are no non-portable control characters belonging to the
+ *       "black list" (0..6, 14..25, 28..31).
+ *    b) There is at least one printable character belonging to the
+ *       "white list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255).
+ * - BINARY otherwise.
+ * - The following partially-portable control characters form a
+ *   "gray list" that is ignored in this detection algorithm:
+ *   (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}).
+ * IN assertion: the fields Freq of dyn_ltree are set.
+ */
+local int detect_data_type(s)
+    deflate_state *s;
+{
+    /* black_mask is the bit mask of black-listed bytes
+     * set bits 0..6, 14..25, and 28..31
+     * 0xf3ffc07f = binary 11110011111111111100000001111111
+     */
+    unsigned long black_mask = 0xf3ffc07fUL;
+    int n;
+
+    /* Check for non-textual ("black-listed") bytes. */
+    for (n = 0; n <= 31; n++, black_mask >>= 1)
+        if ((black_mask & 1) && (s->dyn_ltree[n].Freq != 0))
+            return Z_BINARY;
+
+    /* Check for textual ("white-listed") bytes. */
+    if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0
+            || s->dyn_ltree[13].Freq != 0)
+        return Z_TEXT;
+    for (n = 32; n < LITERALS; n++)
+        if (s->dyn_ltree[n].Freq != 0)
+            return Z_TEXT;
+
+    /* There are no "black-listed" or "white-listed" bytes:
+     * this stream either is empty or has tolerated ("gray-listed") bytes only.
+     */
+    return Z_BINARY;
+}
+
+/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
+ */
+local unsigned bi_reverse(code, len)
+    unsigned code; /* the value to invert */
+    int len;       /* its bit length */
+{
+    register unsigned res = 0;
+    do {
+        res |= code & 1;
+        code >>= 1, res <<= 1;
+    } while (--len > 0);
+    return res >> 1;
+}
+
+/* ===========================================================================
+ * Flush the bit buffer, keeping at most 7 bits in it.
+ */
+local void bi_flush(s)
+    deflate_state *s;
+{
+    if (s->bi_valid == 16) {
+        put_short(s, s->bi_buf);
+        s->bi_buf = 0;
+        s->bi_valid = 0;
+    } else if (s->bi_valid >= 8) {
+        put_byte(s, (Byte)s->bi_buf);
+        s->bi_buf >>= 8;
+        s->bi_valid -= 8;
+    }
+}
+
+/* ===========================================================================
+ * Flush the bit buffer and align the output on a byte boundary
+ */
+local void bi_windup(s)
+    deflate_state *s;
+{
+    if (s->bi_valid > 8) {
+        put_short(s, s->bi_buf);
+    } else if (s->bi_valid > 0) {
+        put_byte(s, (Byte)s->bi_buf);
+    }
+    s->bi_buf = 0;
+    s->bi_valid = 0;
+#ifdef DEBUG
+    s->bits_sent = (s->bits_sent+7) & ~7;
+#endif
+}
+
+/* ===========================================================================
+ * Copy a stored block, storing first the length and its
+ * one's complement if requested.
+ */
+local void copy_block(s, buf, len, header)
+    deflate_state *s;
+    charf    *buf;    /* the input data */
+    unsigned len;     /* its length */
+    int      header;  /* true if block header must be written */
+{
+    bi_windup(s);        /* align on byte boundary */
+
+    if (header) {
+        put_short(s, (ush)len);
+        put_short(s, (ush)~len);
+#ifdef DEBUG
+        s->bits_sent += 2*16;
+#endif
+    }
+#ifdef DEBUG
+    s->bits_sent += (ulg)len<<3;
+#endif
+    while (len--) {
+        put_byte(s, *buf++);
+    }
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/trees.h	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,152 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* header created automatically with -DGEN_TREES_H */
+
+local const ct_data static_ltree[L_CODES+2] = {
+{{ 12},{  8}}, {{140},{  8}}, {{ 76},{  8}}, {{204},{  8}}, {{ 44},{  8}},
+{{172},{  8}}, {{108},{  8}}, {{236},{  8}}, {{ 28},{  8}}, {{156},{  8}},
+{{ 92},{  8}}, {{220},{  8}}, {{ 60},{  8}}, {{188},{  8}}, {{124},{  8}},
+{{252},{  8}}, {{  2},{  8}}, {{130},{  8}}, {{ 66},{  8}}, {{194},{  8}},
+{{ 34},{  8}}, {{162},{  8}}, {{ 98},{  8}}, {{226},{  8}}, {{ 18},{  8}},
+{{146},{  8}}, {{ 82},{  8}}, {{210},{  8}}, {{ 50},{  8}}, {{178},{  8}},
+{{114},{  8}}, {{242},{  8}}, {{ 10},{  8}}, {{138},{  8}}, {{ 74},{  8}},
+{{202},{  8}}, {{ 42},{  8}}, {{170},{  8}}, {{106},{  8}}, {{234},{  8}},
+{{ 26},{  8}}, {{154},{  8}}, {{ 90},{  8}}, {{218},{  8}}, {{ 58},{  8}},
+{{186},{  8}}, {{122},{  8}}, {{250},{  8}}, {{  6},{  8}}, {{134},{  8}},
+{{ 70},{  8}}, {{198},{  8}}, {{ 38},{  8}}, {{166},{  8}}, {{102},{  8}},
+{{230},{  8}}, {{ 22},{  8}}, {{150},{  8}}, {{ 86},{  8}}, {{214},{  8}},
+{{ 54},{  8}}, {{182},{  8}}, {{118},{  8}}, {{246},{  8}}, {{ 14},{  8}},
+{{142},{  8}}, {{ 78},{  8}}, {{206},{  8}}, {{ 46},{  8}}, {{174},{  8}},
+{{110},{  8}}, {{238},{  8}}, {{ 30},{  8}}, {{158},{  8}}, {{ 94},{  8}},
+{{222},{  8}}, {{ 62},{  8}}, {{190},{  8}}, {{126},{  8}}, {{254},{  8}},
+{{  1},{  8}}, {{129},{  8}}, {{ 65},{  8}}, {{193},{  8}}, {{ 33},{  8}},
+{{161},{  8}}, {{ 97},{  8}}, {{225},{  8}}, {{ 17},{  8}}, {{145},{  8}},
+{{ 81},{  8}}, {{209},{  8}}, {{ 49},{  8}}, {{177},{  8}}, {{113},{  8}},
+{{241},{  8}}, {{  9},{  8}}, {{137},{  8}}, {{ 73},{  8}}, {{201},{  8}},
+{{ 41},{  8}}, {{169},{  8}}, {{105},{  8}}, {{233},{  8}}, {{ 25},{  8}},
+{{153},{  8}}, {{ 89},{  8}}, {{217},{  8}}, {{ 57},{  8}}, {{185},{  8}},
+{{121},{  8}}, {{249},{  8}}, {{  5},{  8}}, {{133},{  8}}, {{ 69},{  8}},
+{{197},{  8}}, {{ 37},{  8}}, {{165},{  8}}, {{101},{  8}}, {{229},{  8}},
+{{ 21},{  8}}, {{149},{  8}}, {{ 85},{  8}}, {{213},{  8}}, {{ 53},{  8}},
+{{181},{  8}}, {{117},{  8}}, {{245},{  8}}, {{ 13},{  8}}, {{141},{  8}},
+{{ 77},{  8}}, {{205},{  8}}, {{ 45},{  8}}, {{173},{  8}}, {{109},{  8}},
+{{237},{  8}}, {{ 29},{  8}}, {{157},{  8}}, {{ 93},{  8}}, {{221},{  8}},
+{{ 61},{  8}}, {{189},{  8}}, {{125},{  8}}, {{253},{  8}}, {{ 19},{  9}},
+{{275},{  9}}, {{147},{  9}}, {{403},{  9}}, {{ 83},{  9}}, {{339},{  9}},
+{{211},{  9}}, {{467},{  9}}, {{ 51},{  9}}, {{307},{  9}}, {{179},{  9}},
+{{435},{  9}}, {{115},{  9}}, {{371},{  9}}, {{243},{  9}}, {{499},{  9}},
+{{ 11},{  9}}, {{267},{  9}}, {{139},{  9}}, {{395},{  9}}, {{ 75},{  9}},
+{{331},{  9}}, {{203},{  9}}, {{459},{  9}}, {{ 43},{  9}}, {{299},{  9}},
+{{171},{  9}}, {{427},{  9}}, {{107},{  9}}, {{363},{  9}}, {{235},{  9}},
+{{491},{  9}}, {{ 27},{  9}}, {{283},{  9}}, {{155},{  9}}, {{411},{  9}},
+{{ 91},{  9}}, {{347},{  9}}, {{219},{  9}}, {{475},{  9}}, {{ 59},{  9}},
+{{315},{  9}}, {{187},{  9}}, {{443},{  9}}, {{123},{  9}}, {{379},{  9}},
+{{251},{  9}}, {{507},{  9}}, {{  7},{  9}}, {{263},{  9}}, {{135},{  9}},
+{{391},{  9}}, {{ 71},{  9}}, {{327},{  9}}, {{199},{  9}}, {{455},{  9}},
+{{ 39},{  9}}, {{295},{  9}}, {{167},{  9}}, {{423},{  9}}, {{103},{  9}},
+{{359},{  9}}, {{231},{  9}}, {{487},{  9}}, {{ 23},{  9}}, {{279},{  9}},
+{{151},{  9}}, {{407},{  9}}, {{ 87},{  9}}, {{343},{  9}}, {{215},{  9}},
+{{471},{  9}}, {{ 55},{  9}}, {{311},{  9}}, {{183},{  9}}, {{439},{  9}},
+{{119},{  9}}, {{375},{  9}}, {{247},{  9}}, {{503},{  9}}, {{ 15},{  9}},
+{{271},{  9}}, {{143},{  9}}, {{399},{  9}}, {{ 79},{  9}}, {{335},{  9}},
+{{207},{  9}}, {{463},{  9}}, {{ 47},{  9}}, {{303},{  9}}, {{175},{  9}},
+{{431},{  9}}, {{111},{  9}}, {{367},{  9}}, {{239},{  9}}, {{495},{  9}},
+{{ 31},{  9}}, {{287},{  9}}, {{159},{  9}}, {{415},{  9}}, {{ 95},{  9}},
+{{351},{  9}}, {{223},{  9}}, {{479},{  9}}, {{ 63},{  9}}, {{319},{  9}},
+{{191},{  9}}, {{447},{  9}}, {{127},{  9}}, {{383},{  9}}, {{255},{  9}},
+{{511},{  9}}, {{  0},{  7}}, {{ 64},{  7}}, {{ 32},{  7}}, {{ 96},{  7}},
+{{ 16},{  7}}, {{ 80},{  7}}, {{ 48},{  7}}, {{112},{  7}}, {{  8},{  7}},
+{{ 72},{  7}}, {{ 40},{  7}}, {{104},{  7}}, {{ 24},{  7}}, {{ 88},{  7}},
+{{ 56},{  7}}, {{120},{  7}}, {{  4},{  7}}, {{ 68},{  7}}, {{ 36},{  7}},
+{{100},{  7}}, {{ 20},{  7}}, {{ 84},{  7}}, {{ 52},{  7}}, {{116},{  7}},
+{{  3},{  8}}, {{131},{  8}}, {{ 67},{  8}}, {{195},{  8}}, {{ 35},{  8}},
+{{163},{  8}}, {{ 99},{  8}}, {{227},{  8}}
+};
+
+local const ct_data static_dtree[D_CODES] = {
+{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
+{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
+{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
+{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
+{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
+{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
+};
+
+const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {
+ 0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
+ 8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
+10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
+11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
+12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  0,  0, 16, 17,
+18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
+};
+
+const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {
+ 0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
+13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
+17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
+19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
+21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
+22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
+};
+
+local const int base_length[LENGTH_CODES] = {
+0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
+64, 80, 96, 112, 128, 160, 192, 224, 0
+};
+
+local const int base_dist[D_CODES] = {
+    0,     1,     2,     3,     4,     6,     8,    12,    16,    24,
+   32,    48,    64,    96,   128,   192,   256,   384,   512,   768,
+ 1024,  1536,  2048,  3072,  4096,  6144,  8192, 12288, 16384, 24576
+};
+
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/uncompr.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,83 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* uncompr.c -- decompress a memory buffer
+ * Copyright (C) 1995-2003, 2010 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+/* ===========================================================================
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be large enough to hold the
+   entire uncompressed data. (The size of the uncompressed data must have
+   been saved previously by the compressor and transmitted to the decompressor
+   by some mechanism outside the scope of this compression library.)
+   Upon exit, destLen is the actual size of the compressed buffer.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer, or Z_DATA_ERROR if the input data was corrupted.
+*/
+int ZEXPORT uncompress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    z_stream stream;
+    int err;
+
+    stream.next_in = (z_const Bytef *)source;
+    stream.avail_in = (uInt)sourceLen;
+    /* Check for source > 64K on 16-bit machine: */
+    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+
+    stream.next_out = dest;
+    stream.avail_out = (uInt)*destLen;
+    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+    stream.zalloc = (alloc_func)0;
+    stream.zfree = (free_func)0;
+
+    err = inflateInit(&stream);
+    if (err != Z_OK) return err;
+
+    err = inflate(&stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        inflateEnd(&stream);
+        if (err == Z_NEED_DICT || (err == Z_BUF_ERROR && stream.avail_in == 0))
+            return Z_DATA_ERROR;
+        return err;
+    }
+    *destLen = stream.total_out;
+
+    err = inflateEnd(&stream);
+    return err;
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/zadler32.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,203 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995-2011 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+
+#define local static
+
+local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
+
+#define BASE 65521      /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
+#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf)   DO8(buf,0); DO8(buf,8);
+
+/* use NO_DIVIDE if your processor does not do division in hardware --
+   try it both ways to see which is faster */
+#ifdef NO_DIVIDE
+/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
+   (thank you to John Reiser for pointing this out) */
+#  define CHOP(a) \
+    do { \
+        unsigned long tmp = a >> 16; \
+        a &= 0xffffUL; \
+        a += (tmp << 4) - tmp; \
+    } while (0)
+#  define MOD28(a) \
+    do { \
+        CHOP(a); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#  define MOD(a) \
+    do { \
+        CHOP(a); \
+        MOD28(a); \
+    } while (0)
+#  define MOD63(a) \
+    do { /* this assumes a is not negative */ \
+        z_off64_t tmp = a >> 32; \
+        a &= 0xffffffffL; \
+        a += (tmp << 8) - (tmp << 5) + tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#else
+#  define MOD(a) a %= BASE
+#  define MOD28(a) a %= BASE
+#  define MOD63(a) a %= BASE
+#endif
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(adler, buf, len)
+    uLong adler;
+    const Bytef *buf;
+    uInt len;
+{
+    unsigned long sum2;
+    unsigned n;
+
+    /* split Adler-32 into component sums */
+    sum2 = (adler >> 16) & 0xffff;
+    adler &= 0xffff;
+
+    /* in case user likes doing a byte at a time, keep it fast */
+    if (len == 1) {
+        adler += buf[0];
+        if (adler >= BASE)
+            adler -= BASE;
+        sum2 += adler;
+        if (sum2 >= BASE)
+            sum2 -= BASE;
+        return adler | (sum2 << 16);
+    }
+
+    /* initial Adler-32 value (deferred check for len == 1 speed) */
+    if (buf == Z_NULL)
+        return 1L;
+
+    /* in case short lengths are provided, keep it somewhat fast */
+    if (len < 16) {
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        if (adler >= BASE)
+            adler -= BASE;
+        MOD28(sum2);            /* only added so many BASE's */
+        return adler | (sum2 << 16);
+    }
+
+    /* do length NMAX blocks -- requires just one modulo operation */
+    while (len >= NMAX) {
+        len -= NMAX;
+        n = NMAX / 16;          /* NMAX is divisible by 16 */
+        do {
+            DO16(buf);          /* 16 sums unrolled */
+            buf += 16;
+        } while (--n);
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* do remaining bytes (less than NMAX, still just one modulo) */
+    if (len) {                  /* avoid modulos if none remaining */
+        while (len >= 16) {
+            len -= 16;
+            DO16(buf);
+            buf += 16;
+        }
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* return recombined sums */
+    return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+local uLong adler32_combine_(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    unsigned long sum1;
+    unsigned long sum2;
+    unsigned rem;
+
+    /* for negative len, return invalid adler32 as a clue for debugging */
+    if (len2 < 0)
+        return 0xffffffffUL;
+
+    /* the derivation of this formula is left as an exercise for the reader */
+    MOD63(len2);                /* assumes len2 >= 0 */
+    rem = (unsigned)len2;
+    sum1 = adler1 & 0xffff;
+    sum2 = rem * sum1;
+    MOD(sum2);
+    sum1 += (adler2 & 0xffff) + BASE - 1;
+    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1);
+    if (sum2 >= BASE) sum2 -= BASE;
+    return sum1 | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
+}
+
+uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/zconf.h	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,543 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2013 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+/* for _LP64 */
+#include <sys/types.h>
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
+ */
+#ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET
+
+/* all linked symbols */
+#  define _dist_code            z__dist_code
+#  define _length_code          z__length_code
+#  define _tr_align             z__tr_align
+#  define _tr_flush_bits        z__tr_flush_bits
+#  define _tr_flush_block       z__tr_flush_block
+#  define _tr_init              z__tr_init
+#  define _tr_stored_block      z__tr_stored_block
+#  define _tr_tally             z__tr_tally
+#  define adler32               z_adler32
+#  define adler32_combine       z_adler32_combine
+#  define adler32_combine64     z_adler32_combine64
+#  ifndef Z_SOLO
+#    define compress              z_compress
+#    define compress2             z_compress2
+#    define compressBound         z_compressBound
+#  endif
+#  define crc32                 z_crc32
+#  define crc32_combine         z_crc32_combine
+#  define crc32_combine64       z_crc32_combine64
+#  define deflate               z_deflate
+#  define deflateBound          z_deflateBound
+#  define deflateCopy           z_deflateCopy
+#  define deflateEnd            z_deflateEnd
+#  define deflateInit2_         z_deflateInit2_
+#  define deflateInit_          z_deflateInit_
+#  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
+#  define deflatePrime          z_deflatePrime
+#  define deflateReset          z_deflateReset
+#  define deflateResetKeep      z_deflateResetKeep
+#  define deflateSetDictionary  z_deflateSetDictionary
+#  define deflateSetHeader      z_deflateSetHeader
+#  define deflateTune           z_deflateTune
+#  define deflate_copyright     z_deflate_copyright
+#  define get_crc_table         z_get_crc_table
+#  ifndef Z_SOLO
+#    define gz_error              z_gz_error
+#    define gz_intmax             z_gz_intmax
+#    define gz_strwinerror        z_gz_strwinerror
+#    define gzbuffer              z_gzbuffer
+#    define gzclearerr            z_gzclearerr
+#    define gzclose               z_gzclose
+#    define gzclose_r             z_gzclose_r
+#    define gzclose_w             z_gzclose_w
+#    define gzdirect              z_gzdirect
+#    define gzdopen               z_gzdopen
+#    define gzeof                 z_gzeof
+#    define gzerror               z_gzerror
+#    define gzflush               z_gzflush
+#    define gzgetc                z_gzgetc
+#    define gzgetc_               z_gzgetc_
+#    define gzgets                z_gzgets
+#    define gzoffset              z_gzoffset
+#    define gzoffset64            z_gzoffset64
+#    define gzopen                z_gzopen
+#    define gzopen64              z_gzopen64
+#    ifdef _WIN32
+#      define gzopen_w              z_gzopen_w
+#    endif
+#    define gzprintf              z_gzprintf
+#    define gzvprintf             z_gzvprintf
+#    define gzputc                z_gzputc
+#    define gzputs                z_gzputs
+#    define gzread                z_gzread
+#    define gzrewind              z_gzrewind
+#    define gzseek                z_gzseek
+#    define gzseek64              z_gzseek64
+#    define gzsetparams           z_gzsetparams
+#    define gztell                z_gztell
+#    define gztell64              z_gztell64
+#    define gzungetc              z_gzungetc
+#    define gzwrite               z_gzwrite
+#  endif
+#  define inflate               z_inflate
+#  define inflateBack           z_inflateBack
+#  define inflateBackEnd        z_inflateBackEnd
+#  define inflateBackInit_      z_inflateBackInit_
+#  define inflateCopy           z_inflateCopy
+#  define inflateEnd            z_inflateEnd
+#  define inflateGetHeader      z_inflateGetHeader
+#  define inflateInit2_         z_inflateInit2_
+#  define inflateInit_          z_inflateInit_
+#  define inflateMark           z_inflateMark
+#  define inflatePrime          z_inflatePrime
+#  define inflateReset          z_inflateReset
+#  define inflateReset2         z_inflateReset2
+#  define inflateSetDictionary  z_inflateSetDictionary
+#  define inflateGetDictionary  z_inflateGetDictionary
+#  define inflateSync           z_inflateSync
+#  define inflateSyncPoint      z_inflateSyncPoint
+#  define inflateUndermine      z_inflateUndermine
+#  define inflateResetKeep      z_inflateResetKeep
+#  define inflate_copyright     z_inflate_copyright
+#  define inflate_fast          z_inflate_fast
+#  define inflate_table         z_inflate_table
+#  ifndef Z_SOLO
+#    define uncompress            z_uncompress
+#  endif
+#  define zError                z_zError
+#  ifndef Z_SOLO
+#    define zcalloc               z_zcalloc
+#    define zcfree                z_zcfree
+#  endif
+#  define zlibCompileFlags      z_zlibCompileFlags
+#  define zlibVersion           z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+#  define Byte                  z_Byte
+#  define Bytef                 z_Bytef
+#  define alloc_func            z_alloc_func
+#  define charf                 z_charf
+#  define free_func             z_free_func
+#  ifndef Z_SOLO
+#    define gzFile                z_gzFile
+#  endif
+#  define gz_header             z_gz_header
+#  define gz_headerp            z_gz_headerp
+#  define in_func               z_in_func
+#  define intf                  z_intf
+#  define out_func              z_out_func
+#  define uInt                  z_uInt
+#  define uIntf                 z_uIntf
+#  define uLong                 z_uLong
+#  define uLongf                z_uLongf
+#  define voidp                 z_voidp
+#  define voidpc                z_voidpc
+#  define voidpf                z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+#  define gz_header_s           z_gz_header_s
+#  define internal_state        z_internal_state
+
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+#  define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+#  define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+#  define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+#  ifndef WIN32
+#    define WIN32
+#  endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+#    ifndef SYS16BIT
+#      define SYS16BIT
+#    endif
+#  endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+#  define MAXSEG_64K
+#endif
+#ifdef MSDOS
+#  define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+#  ifndef STDC
+#    define STDC
+#  endif
+#  if __STDC_VERSION__ >= 199901L
+#    ifndef STDC99
+#      define STDC99
+#    endif
+#  endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+#  define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
+#  define STDC
+#endif
+
+#ifndef STDC
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const       /* note: need a more gentle solution here */
+#  endif
+#endif
+
+#if defined(ZLIB_CONST) && !defined(z_const)
+#  define z_const const
+#else
+#  define z_const
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
+#  define NO_DUMMY_DECL
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+#ifndef Z_ARG /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define Z_ARG(args)  args
+#  else
+#    define Z_ARG(args)  ()
+#  endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+#  if defined(M_I86SM) || defined(M_I86MM)
+     /* MSC small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef _MSC_VER
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#  if (defined(__SMALL__) || defined(__MEDIUM__))
+     /* Turbo C small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef __BORLANDC__
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+   /* If building or using zlib as a DLL, define ZLIB_DLL.
+    * This is not mandatory, but it offers a little performance increase.
+    */
+#  ifdef ZLIB_DLL
+#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+#      ifdef ZLIB_INTERNAL
+#        define ZEXTERN extern __declspec(dllexport)
+#      else
+#        define ZEXTERN extern __declspec(dllimport)
+#      endif
+#    endif
+#  endif  /* ZLIB_DLL */
+   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+    * define ZLIB_WINAPI.
+    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+    */
+#  ifdef ZLIB_WINAPI
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+     /* No need for _export, use ZLIB.DEF instead. */
+     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+#    define ZEXPORT WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA WINAPIV
+#    else
+#      define ZEXPORTVA FAR CDECL
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  ifdef ZLIB_DLL
+#    ifdef ZLIB_INTERNAL
+#      define ZEXPORT   __declspec(dllexport)
+#      define ZEXPORTVA __declspec(dllexport)
+#    else
+#      define ZEXPORT   __declspec(dllimport)
+#      define ZEXPORTVA __declspec(dllimport)
+#    endif
+#  endif
+#endif
+
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
+
+#ifndef FAR
+#  define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char  Byte;  /* 8 bits */
+#endif
+typedef unsigned int   uInt;  /* 16 bits or more */
+
+#ifdef _LP64
+typedef unsigned int  uLong;  /* 32 bits or more */
+#else
+typedef unsigned long  uLong; /* 32 bits or more */
+#endif
+
+#ifdef SMALL_MEDIUM
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+#  define Bytef Byte FAR
+#else
+   typedef Byte  FAR Bytef;
+#endif
+typedef char  FAR charf;
+typedef int   FAR intf;
+typedef uInt  FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+   typedef void const *voidpc;
+   typedef void FAR   *voidpf;
+   typedef void       *voidp;
+#else
+   typedef Byte const *voidpc;
+   typedef Byte FAR   *voidpf;
+   typedef Byte       *voidp;
+#endif
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+#  include <limits.h>
+#  if (UINT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned
+#  elif (ULONG_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned long
+#  elif (USHRT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned short
+#  endif
+#endif
+
+#ifdef Z_U4
+   typedef Z_U4 z_crc_t;
+#else
+   typedef unsigned long z_crc_t;
+#endif
+
+#ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+#  ifndef Z_SOLO
+#    include <sys/types.h>      /* for off_t */
+#  endif
+#endif
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifndef Z_SOLO
+#    include <stdarg.h>         /* for va_list */
+#  endif
+#endif
+
+#ifdef _WIN32
+#  ifndef Z_SOLO
+#    include <stddef.h>         /* for wchar_t */
+#  endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+#  define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+#  if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+#    ifdef VMS
+#      include <unixio.h>       /* for off_t */
+#    endif
+#    ifndef z_off_t
+#      define z_off_t off_t
+#    endif
+#  endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+#  define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+#  define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
+#endif
+
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+
+#ifndef z_off_t
+#  define z_off_t long
+#endif
+
+#if !defined(_WIN32) && defined(Z_LARGE64)
+#  define z_off64_t off64_t
+#else
+#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+#    define z_off64_t __int64
+#  else
+#    define z_off64_t z_off_t
+#  endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+  #pragma map(deflateInit_,"DEIN")
+  #pragma map(deflateInit2_,"DEIN2")
+  #pragma map(deflateEnd,"DEEND")
+  #pragma map(deflateBound,"DEBND")
+  #pragma map(inflateInit_,"ININ")
+  #pragma map(inflateInit2_,"ININ2")
+  #pragma map(inflateEnd,"INEND")
+  #pragma map(inflateSync,"INSY")
+  #pragma map(inflateSetDictionary,"INSEDI")
+  #pragma map(compressBound,"CMBND")
+  #pragma map(inflate_table,"INTABL")
+  #pragma map(inflate_fast,"INFA")
+  #pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/zcrc32.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,449 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* crc32.c -- compute the CRC-32 of a data stream
+ * Copyright (C) 1995-2006, 2010, 2011, 2012 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
+ * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
+ * tables for updating the shift register in one step with three exclusive-ors
+ * instead of four steps with four exclusive-ors.  This results in about a
+ * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
+ */
+
+/* @(#) $Id$ */
+
+/*
+  Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
+  protection on the static variables used to control the first-use generation
+  of the crc tables.  Therefore, if you #define DYNAMIC_CRC_TABLE, you should
+  first call get_crc_table() to initialize the tables before allowing more than
+  one thread to use crc32().
+
+  DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
+ */
+
+#ifdef MAKECRCH
+#  include <stdio.h>
+#  ifndef DYNAMIC_CRC_TABLE
+#    define DYNAMIC_CRC_TABLE
+#  endif /* !DYNAMIC_CRC_TABLE */
+#endif /* MAKECRCH */
+
+#include "zutil.h"      /* for STDC and FAR definitions */
+
+#define local static
+
+/* Definitions for doing the crc four data bytes at a time. */
+#if !defined(NOBYFOUR) && defined(Z_U4)
+#  define BYFOUR
+#endif
+#ifdef BYFOUR
+   local unsigned long crc32_little OF((unsigned long,
+                        const unsigned char FAR *, unsigned));
+   local unsigned long crc32_big OF((unsigned long,
+                        const unsigned char FAR *, unsigned));
+#  define TBLS 8
+#else
+#  define TBLS 1
+#endif /* BYFOUR */
+
+/* Local functions for crc concatenation */
+local unsigned long gf2_matrix_times OF((unsigned long *mat,
+                                         unsigned long vec));
+local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
+local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
+
+
+#ifdef DYNAMIC_CRC_TABLE
+
+local volatile int crc_table_empty = 1;
+local z_crc_t FAR crc_table[TBLS][256];
+local void make_crc_table OF((void));
+#ifdef MAKECRCH
+   local void write_table OF((FILE *, const z_crc_t FAR *));
+#endif /* MAKECRCH */
+/*
+  Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
+  x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
+
+  Polynomials over GF(2) are represented in binary, one bit per coefficient,
+  with the lowest powers in the most significant bit.  Then adding polynomials
+  is just exclusive-or, and multiplying a polynomial by x is a right shift by
+  one.  If we call the above polynomial p, and represent a byte as the
+  polynomial q, also with the lowest power in the most significant bit (so the
+  byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
+  where a mod b means the remainder after dividing a by b.
+
+  This calculation is done using the shift-register method of multiplying and
+  taking the remainder.  The register is initialized to zero, and for each
+  incoming bit, x^32 is added mod p to the register if the bit is a one (where
+  x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
+  x (which is shifting right by one and adding x^32 mod p if the bit shifted
+  out is a one).  We start with the highest power (least significant bit) of
+  q and repeat for all eight bits of q.
+
+  The first table is simply the CRC of all possible eight bit values.  This is
+  all the information needed to generate CRCs on data a byte at a time for all
+  combinations of CRC register values and incoming bytes.  The remaining tables
+  allow for word-at-a-time CRC calculation for both big-endian and little-
+  endian machines, where a word is four bytes.
+*/
+local void make_crc_table()
+{
+    z_crc_t c;
+    int n, k;
+    z_crc_t poly;                       /* polynomial exclusive-or pattern */
+    /* terms of polynomial defining this crc (except x^32): */
+    static volatile int first = 1;      /* flag to limit concurrent making */
+    static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+
+    /* See if another task is already doing this (not thread-safe, but better
+       than nothing -- significantly reduces duration of vulnerability in
+       case the advice about DYNAMIC_CRC_TABLE is ignored) */
+    if (first) {
+        first = 0;
+
+        /* make exclusive-or pattern from polynomial (0xedb88320UL) */
+        poly = 0;
+        for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
+            poly |= (z_crc_t)1 << (31 - p[n]);
+
+        /* generate a crc for every 8-bit value */
+        for (n = 0; n < 256; n++) {
+            c = (z_crc_t)n;
+            for (k = 0; k < 8; k++)
+                c = c & 1 ? poly ^ (c >> 1) : c >> 1;
+            crc_table[0][n] = c;
+        }
+
+#ifdef BYFOUR
+        /* generate crc for each value followed by one, two, and three zeros,
+           and then the byte reversal of those as well as the first table */
+        for (n = 0; n < 256; n++) {
+            c = crc_table[0][n];
+            crc_table[4][n] = ZSWAP32(c);
+            for (k = 1; k < 4; k++) {
+                c = crc_table[0][c & 0xff] ^ (c >> 8);
+                crc_table[k][n] = c;
+                crc_table[k + 4][n] = ZSWAP32(c);
+            }
+        }
+#endif /* BYFOUR */
+
+        crc_table_empty = 0;
+    }
+    else {      /* not first */
+        /* wait for the other guy to finish (not efficient, but rare) */
+        while (crc_table_empty)
+            ;
+    }
+
+#ifdef MAKECRCH
+    /* write out CRC tables to crc32.h */
+    {
+        FILE *out;
+
+        out = fopen("crc32.h", "w");
+        if (out == NULL) return;
+        fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
+        fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
+        fprintf(out, "local const z_crc_t FAR ");
+        fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
+        write_table(out, crc_table[0]);
+#  ifdef BYFOUR
+        fprintf(out, "#ifdef BYFOUR\n");
+        for (k = 1; k < 8; k++) {
+            fprintf(out, "  },\n  {\n");
+            write_table(out, crc_table[k]);
+        }
+        fprintf(out, "#endif\n");
+#  endif /* BYFOUR */
+        fprintf(out, "  }\n};\n");
+        fclose(out);
+    }
+#endif /* MAKECRCH */
+}
+
+#ifdef MAKECRCH
+local void write_table(out, table)
+    FILE *out;
+    const z_crc_t FAR *table;
+{
+    int n;
+
+    for (n = 0; n < 256; n++)
+        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ",
+                (unsigned long)(table[n]),
+                n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
+}
+#endif /* MAKECRCH */
+
+#else /* !DYNAMIC_CRC_TABLE */
+/* ========================================================================
+ * Tables of CRC-32s of all single-byte values, made by make_crc_table().
+ */
+#include "crc32.h"
+#endif /* DYNAMIC_CRC_TABLE */
+
+/* =========================================================================
+ * This function can be used by asm versions of crc32()
+ */
+const z_crc_t FAR * ZEXPORT get_crc_table()
+{
+#ifdef DYNAMIC_CRC_TABLE
+    if (crc_table_empty)
+        make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+    return (const z_crc_t FAR *)crc_table;
+}
+
+/* ========================================================================= */
+#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
+#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
+
+/* ========================================================================= */
+uLong ZEXPORT crc32(crc, buf, len)
+    uLong crc;
+    const unsigned char FAR *buf;
+    uInt len;
+{
+    if (buf == Z_NULL) return 0UL;
+
+#ifdef DYNAMIC_CRC_TABLE
+    if (crc_table_empty)
+        make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+
+#ifdef BYFOUR
+    if (sizeof(void *) == sizeof(ptrdiff_t)) {
+        z_crc_t endian;
+
+        endian = 1;
+        if (*((unsigned char *)(&endian)))
+            return (uLong)crc32_little(crc, buf, len);
+        else
+            return (uLong)crc32_big(crc, buf, len);
+    }
+#endif /* BYFOUR */
+    crc = crc ^ 0xffffffffUL;
+    while (len >= 8) {
+        DO8;
+        len -= 8;
+    }
+    if (len) do {
+        DO1;
+    } while (--len);
+    return crc ^ 0xffffffffUL;
+}
+
+#ifdef BYFOUR
+
+/* ========================================================================= */
+#define DOLIT4 c ^= *buf4++; \
+        c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
+            crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
+#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
+
+/* ========================================================================= */
+local unsigned long crc32_little(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    unsigned len;
+{
+    register z_crc_t c;
+    register const z_crc_t FAR *buf4;
+
+    c = (z_crc_t)crc;
+    c = ~c;
+    while (len && ((ptrdiff_t)buf & 3)) {
+        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+        len--;
+    }
+
+    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
+    while (len >= 32) {
+        DOLIT32;
+        len -= 32;
+    }
+    while (len >= 4) {
+        DOLIT4;
+        len -= 4;
+    }
+    buf = (const unsigned char FAR *)buf4;
+
+    if (len) do {
+        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+    } while (--len);
+    c = ~c;
+    return (unsigned long)c;
+}
+
+/* ========================================================================= */
+#define DOBIG4 c ^= *++buf4; \
+        c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
+            crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
+#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
+
+/* ========================================================================= */
+local unsigned long crc32_big(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    unsigned len;
+{
+    register z_crc_t c;
+    register const z_crc_t FAR *buf4;
+
+    c = ZSWAP32((z_crc_t)crc);
+    c = ~c;
+    while (len && ((ptrdiff_t)buf & 3)) {
+        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+        len--;
+    }
+
+    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
+    buf4--;
+    while (len >= 32) {
+        DOBIG32;
+        len -= 32;
+    }
+    while (len >= 4) {
+        DOBIG4;
+        len -= 4;
+    }
+    buf4++;
+    buf = (const unsigned char FAR *)buf4;
+
+    if (len) do {
+        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+    } while (--len);
+    c = ~c;
+    return (unsigned long)(ZSWAP32(c));
+}
+
+#endif /* BYFOUR */
+
+#define GF2_DIM 32      /* dimension of GF(2) vectors (length of CRC) */
+
+/* ========================================================================= */
+local unsigned long gf2_matrix_times(mat, vec)
+    unsigned long *mat;
+    unsigned long vec;
+{
+    unsigned long sum;
+
+    sum = 0;
+    while (vec) {
+        if (vec & 1)
+            sum ^= *mat;
+        vec >>= 1;
+        mat++;
+    }
+    return sum;
+}
+
+/* ========================================================================= */
+local void gf2_matrix_square(square, mat)
+    unsigned long *square;
+    unsigned long *mat;
+{
+    int n;
+
+    for (n = 0; n < GF2_DIM; n++)
+        square[n] = gf2_matrix_times(mat, mat[n]);
+}
+
+/* ========================================================================= */
+local uLong crc32_combine_(crc1, crc2, len2)
+    uLong crc1;
+    uLong crc2;
+    z_off64_t len2;
+{
+    int n;
+    unsigned long row;
+    unsigned long even[GF2_DIM];    /* even-power-of-two zeros operator */
+    unsigned long odd[GF2_DIM];     /* odd-power-of-two zeros operator */
+
+    /* degenerate case (also disallow negative lengths) */
+    if (len2 <= 0)
+        return crc1;
+
+    /* put operator for one zero bit in odd */
+    odd[0] = 0xedb88320UL;          /* CRC-32 polynomial */
+    row = 1;
+    for (n = 1; n < GF2_DIM; n++) {
+        odd[n] = row;
+        row <<= 1;
+    }
+
+    /* put operator for two zero bits in even */
+    gf2_matrix_square(even, odd);
+
+    /* put operator for four zero bits in odd */
+    gf2_matrix_square(odd, even);
+
+    /* apply len2 zeros to crc1 (first square will put the operator for one
+       zero byte, eight zero bits, in even) */
+    do {
+        /* apply zeros operator for this bit of len2 */
+        gf2_matrix_square(even, odd);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(even, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+        if (len2 == 0)
+            break;
+
+        /* another iteration of the loop with odd and even swapped */
+        gf2_matrix_square(odd, even);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(odd, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+    } while (len2 != 0);
+
+    /* return combined crc */
+    crc1 ^= crc2;
+    return crc1;
+}
+
+/* ========================================================================= */
+uLong ZEXPORT crc32_combine(crc1, crc2, len2)
+    uLong crc1;
+    uLong crc2;
+    z_off_t len2;
+{
+    return crc32_combine_(crc1, crc2, len2);
+}
+
+uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
+    uLong crc1;
+    uLong crc2;
+    z_off64_t len2;
+{
+    return crc32_combine_(crc1, crc2, len2);
+}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/zlib.h	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,1792 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+  version 1.2.8, April 28th, 2013
+
+  Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
+  (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
+*/
+
+#ifndef ZLIB_H
+#define ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.2.8"
+#define ZLIB_VERNUM 0x1280
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 8
+#define ZLIB_VER_SUBREVISION 0
+
+/*
+    The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed data.
+  This version of the library supports only one compression method (deflation)
+  but other algorithms will be added later and will have the same stream
+  interface.
+
+    Compression can be done in a single step if the buffers are large enough,
+  or can be done by repeated calls of the compression function.  In the latter
+  case, the application must provide more input and/or consume the output
+  (providing more output space) before each call.
+
+    The compressed data format used by default by the in-memory functions is
+  the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+  around a deflate stream, which is itself documented in RFC 1951.
+
+    The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio using the functions that start
+  with "gz".  The gzip format is different from the zlib format.  gzip is a
+  gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+    This library can optionally read and write gzip streams in memory as well.
+
+    The zlib format was designed to be compact and fast for use in memory
+  and on communications channels.  The gzip format was designed for single-
+  file compression on file systems, has a larger header than zlib to maintain
+  directory information, and uses a different, slower check method than zlib.
+
+    The library does not install any signal handler.  The decoder checks
+  the consistency of the compressed data, so the library should never crash
+  even in case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+    z_const Bytef *next_in;     /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total number of input bytes read so far */
+
+    Bytef    *next_out; /* next output byte should be put there */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total number of bytes output so far */
+
+    z_const char *msg;  /* last error message, NULL if no error */
+    struct internal_state FAR *state; /* not visible by applications */
+
+    alloc_func zalloc;  /* used to allocate the internal state */
+    free_func  zfree;   /* used to free the internal state */
+    voidpf     opaque;  /* private data object passed to zalloc and zfree */
+
+    int     data_type;  /* best guess about the data type: binary or text */
+    uLong   adler;      /* adler32 value of the uncompressed data */
+    uLong   reserved;   /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+     gzip header information passed to and from zlib routines.  See RFC 1952
+  for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+    int     text;       /* true if compressed data believed to be text */
+    uLong   time;       /* modification time */
+    int     xflags;     /* extra flags (not used when writing a gzip file) */
+    int     os;         /* operating system */
+    Bytef   *extra;     /* pointer to extra field or Z_NULL if none */
+    uInt    extra_len;  /* extra field length (valid if extra != Z_NULL) */
+    uInt    extra_max;  /* space at extra (only when reading header) */
+    Bytef   *name;      /* pointer to zero-terminated file name or Z_NULL */
+    uInt    name_max;   /* space at name (only when reading header) */
+    Bytef   *comment;   /* pointer to zero-terminated comment or Z_NULL */
+    uInt    comm_max;   /* space at comment (only when reading header) */
+    int     hcrc;       /* true if there was or will be a header crc */
+    int     done;       /* true when done reading gzip header (not used
+                           when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
+
+/*
+     The application must update next_in and avail_in when avail_in has dropped
+   to zero.  It must update next_out and avail_out when avail_out has dropped
+   to zero.  The application must initialize zalloc, zfree and opaque before
+   calling the init function.  All other fields are set by the compression
+   library and must not be updated by the application.
+
+     The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree.  This can be useful for custom
+   memory management.  The compression library attaches no meaning to the
+   opaque value.
+
+     zalloc must return Z_NULL if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, zalloc and zfree must be
+   thread safe.
+
+     On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this if
+   the symbol MAXSEG_64K is defined (see zconf.h).  WARNING: On MSDOS, pointers
+   returned by zalloc for objects of exactly 65536 bytes *must* have their
+   offset normalized to zero.  The default allocation function provided by this
+   library ensures this (see zutil.c).  To reduce memory requirements and avoid
+   any allocation of 64K objects, at the expense of compression ratio, compile
+   the library with -DMAX_WBITS=14 (see zconf.h).
+
+     The fields total_in and total_out can be used for statistics or progress
+   reports.  After compression, total_in holds the total size of the
+   uncompressed data and may be saved for use in the decompressor (particularly
+   if the decompressor wants to decompress everything in a single step).
+*/
+
+                        /* constants */
+
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1
+#define Z_SYNC_FLUSH    2
+#define Z_FULL_FLUSH    3
+#define Z_FINISH        4
+#define Z_BLOCK         5
+#define Z_TREES         6
+/* Allowed flush values; see deflate() and inflate() below for details */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_NEED_DICT     2
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION         0
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_RLE                 3
+#define Z_FIXED               4
+#define Z_DEFAULT_STRATEGY    0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY   0
+#define Z_TEXT     1
+#define Z_ASCII    Z_TEXT   /* for compatibility with 1.2.2 and earlier */
+#define Z_UNKNOWN  2
+/* Possible values of the data_type field (though see inflate()) */
+
+#define Z_DEFLATED   8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+
+                        /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is not
+   compatible with the zlib.h header file used by the application.  This check
+   is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+     Initializes the internal stream state for compression.  The fields
+   zalloc, zfree and opaque must be initialized before by the caller.  If
+   zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+   allocation functions.
+
+     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+   1 gives best speed, 9 gives best compression, 0 gives no compression at all
+   (the input data is simply copied a block at a time).  Z_DEFAULT_COMPRESSION
+   requests a default compromise between speed and compression (currently
+   equivalent to level 6).
+
+     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if level is not a valid compression level, or
+   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+   with the version assumed by the caller (ZLIB_VERSION).  msg is set to null
+   if there is no error message.  deflateInit does not perform any compression:
+   this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+    deflate compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
+
+    The detailed semantics are as follows.  deflate performs one or both of the
+  following actions:
+
+  - Compress more input starting at next_in and update next_in and avail_in
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), next_in and avail_in are updated and
+    processing will resume at this point for the next call of deflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly.  This action is forced if the parameter flush is non zero.
+    Forcing flush frequently degrades the compression ratio, so this parameter
+    should be set only when necessary (in interactive applications).  Some
+    output may be provided even if flush is not set.
+
+    Before the call of deflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating avail_in or avail_out accordingly; avail_out should
+  never be zero before the call.  The application can consume the compressed
+  output when it wants, for example when the output buffer is full (avail_out
+  == 0), or after each call of deflate().  If deflate returns Z_OK and with
+  zero avail_out, it must be called again after making room in the output
+  buffer because there might be more output pending.
+
+    Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+  decide how much data to accumulate before producing output, in order to
+  maximize compression.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far.  (In
+  particular avail_in is zero after the call if enough output space has been
+  provided before the call.) Flushing may degrade compression for some
+  compression algorithms and so it should be used only when necessary.  This
+  completes the current deflate block and follows it with an empty stored block
+  that is three bits plus filler bits to the next byte, followed by four bytes
+  (00 00 ff ff).
+
+    If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+  output buffer, but the output is not aligned to a byte boundary.  All of the
+  input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+  This completes the current deflate block and follows it with an empty fixed
+  codes block that is 10 bits long.  This assures that enough bytes are output
+  in order for the decompressor to finish the block before the empty fixed code
+  block.
+
+    If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+  for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+  seven bits of the current block are held to be written as the next byte after
+  the next deflate block is completed.  In this case, the decompressor may not
+  be provided enough bits at this point in order to complete decompression of
+  the data provided so far to the compressor.  It may need to wait for the next
+  block to be emitted.  This is for advanced applications that need to control
+  the emission of deflate blocks.
+
+    If flush is set to Z_FULL_FLUSH, all output is flushed as with
+  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired.  Using Z_FULL_FLUSH too often can seriously degrade
+  compression.
+
+    If deflate returns with avail_out == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  avail_out), until the flush is complete (deflate returns with non-zero
+  avail_out).  In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+  avail_out is greater than six to avoid repeated flush markers due to
+  avail_out == 0 on return.
+
+    If the parameter flush is set to Z_FINISH, pending input is processed,
+  pending output is flushed and deflate returns with Z_STREAM_END if there was
+  enough output space; if deflate returns with Z_OK, this function must be
+  called again with Z_FINISH and more output space (updated avail_out) but no
+  more input data, until it returns with Z_STREAM_END or an error.  After
+  deflate has returned Z_STREAM_END, the only possible operations on the stream
+  are deflateReset or deflateEnd.
+
+    Z_FINISH can be used immediately after deflateInit if all the compression
+  is to be done in a single step.  In this case, avail_out must be at least the
+  value returned by deflateBound (see below).  Then deflate is guaranteed to
+  return Z_STREAM_END.  If not enough output space is provided, deflate will
+  not return Z_STREAM_END, and it must be called again as described above.
+
+    deflate() sets strm->adler to the adler32 checksum of all input read
+  so far (that is, total_in bytes).
+
+    deflate() may update strm->data_type if it can make a good guess about
+  the input data type (Z_BINARY or Z_TEXT).  In doubt, the data is considered
+  binary.  This field is only for information purposes and does not affect the
+  compression algorithm in any manner.
+
+    deflate() returns Z_OK if some progress has been made (more input
+  processed or more output produced), Z_STREAM_END if all input has been
+  consumed and all output has been produced (only when flush is set to
+  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+  if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
+  (for example avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not
+  fatal, and deflate() can be called again with more input and more output
+  space to continue compressing.
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any pending
+   output.
+
+     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+   prematurely (some input or output was discarded).  In the error case, msg
+   may be set but then points to a static string (which must not be
+   deallocated).
+*/
+
+
+/*
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+     Initializes the internal stream state for decompression.  The fields
+   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+   the caller.  If next_in is not Z_NULL and avail_in is large enough (the
+   exact value depends on the compression method), inflateInit determines the
+   compression method from the zlib header and allocates all data structures
+   accordingly; otherwise the allocation will be deferred to the first call of
+   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to
+   use default allocation functions.
+
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit does not perform any decompression
+   apart from possibly reading the zlib header if present: actual decompression
+   will be done by inflate().  (So next_in and avail_in may be modified, but
+   next_out and avail_out are unused and unchanged.) The current implementation
+   of inflateInit() does not process any header information -- that is deferred
+   until inflate() is called.
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+    inflate decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
+
+  The detailed semantics are as follows.  inflate performs one or both of the
+  following actions:
+
+  - Decompress more input starting at next_in and update next_in and avail_in
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), next_in is updated and processing will
+    resume at this point for the next call of inflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() provides as much output as possible, until there is
+    no more input data or no more space in the output buffer (see below about
+    the flush parameter).
+
+    Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating the next_* and avail_* values accordingly.  The
+  application can consume the uncompressed output when it wants, for example
+  when the output buffer is full (avail_out == 0), or after each call of
+  inflate().  If inflate returns Z_OK and with zero avail_out, it must be
+  called again after making room in the output buffer because there might be
+  more output pending.
+
+    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+  Z_BLOCK, or Z_TREES.  Z_SYNC_FLUSH requests that inflate() flush as much
+  output as possible to the output buffer.  Z_BLOCK requests that inflate()
+  stop if and when it gets to the next deflate block boundary.  When decoding
+  the zlib or gzip format, this will cause inflate() to return immediately
+  after the header and before the first block.  When doing a raw inflate,
+  inflate() will go ahead and process the first block, and will return when it
+  gets to the end of that block, or when it runs out of data.
+
+    The Z_BLOCK option assists in appending to or combining deflate streams.
+  Also to assist in this, on return inflate() will set strm->data_type to the
+  number of unused bits in the last byte taken from strm->next_in, plus 64 if
+  inflate() is currently decoding the last block in the deflate stream, plus
+  128 if inflate() returned immediately after decoding an end-of-block code or
+  decoding the complete header up to just before the first byte of the deflate
+  stream.  The end-of-block will not be indicated until all of the uncompressed
+  data from that block has been written to strm->next_out.  The number of
+  unused bits may in general be greater than seven, except when bit 7 of
+  data_type is set, in which case the number of unused bits will be less than
+  eight.  data_type is set as noted here every time inflate() returns for all
+  flush options, and so can be used to determine the amount of currently
+  consumed input in bits.
+
+    The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+  end of each deflate block header is reached, before any actual data in that
+  block is decoded.  This allows the caller to determine the length of the
+  deflate block header for later use in random access within a deflate block.
+  256 is added to the value of strm->data_type when inflate() returns
+  immediately after reaching the end of the deflate block header.
+
+    inflate() should normally be called until it returns Z_STREAM_END or an
+  error.  However if all decompression is to be performed in a single step (a
+  single call of inflate), the parameter flush should be set to Z_FINISH.  In
+  this case all pending input is processed and all pending output is flushed;
+  avail_out must be large enough to hold all of the uncompressed data for the
+  operation to complete.  (The size of the uncompressed data may have been
+  saved by the compressor for this purpose.) The use of Z_FINISH is not
+  required to perform an inflation in one step.  However it may be used to
+  inform inflate that a faster approach can be used for the single inflate()
+  call.  Z_FINISH also informs inflate to not maintain a sliding window if the
+  stream completes, which reduces inflate's memory footprint.  If the stream
+  does not complete, either because not all of the stream is provided or not
+  enough output space is provided, then a sliding window will be allocated and
+  inflate() can be called again to continue the operation as if Z_NO_FLUSH had
+  been used.
+
+     In this implementation, inflate() always flushes as much output as
+  possible to the output buffer, and always uses the faster approach on the
+  first call.  So the effects of the flush parameter in this implementation are
+  on the return value of inflate() as noted below, when inflate() returns early
+  when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
+  memory for a sliding window when Z_FINISH is used.
+
+     If a preset dictionary is needed after this call (see inflateSetDictionary
+  below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
+  chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+  strm->adler to the Adler-32 checksum of all output produced so far (that is,
+  total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+  below.  At the end of the stream, inflate() checks that its computed adler32
+  checksum is equal to that saved by the compressor and returns Z_STREAM_END
+  only if the checksum is correct.
+
+    inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+  deflate data.  The header type is detected automatically, if requested when
+  initializing with inflateInit2().  Any information contained in the gzip
+  header is not retained, so applications that need that information should
+  instead use raw inflate, see inflateInit2() below, or inflateBack() and
+  perform their own processing of the gzip header and trailer.  When processing
+  gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
+  producted so far.  The CRC-32 is checked against the gzip trailer.
+
+    inflate() returns Z_OK if some progress has been made (more input processed
+  or more output produced), Z_STREAM_END if the end of the compressed data has
+  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect check
+  value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+  next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
+  Z_BUF_ERROR if no progress is possible or if there was not enough room in the
+  output buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
+  inflate() can be called again with more input and more output space to
+  continue decompressing.  If Z_DATA_ERROR is returned, the application may
+  then call inflateSync() to look for a good compression block if a partial
+  recovery of the data is desired.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any pending
+   output.
+
+     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+   was inconsistent.  In the error case, msg may be set but then points to a
+   static string (which must not be deallocated).
+*/
+
+
+                        /* Advanced functions */
+
+/*
+    The following functions are needed only in some special applications.
+*/
+
+/*
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+                                     int  level,
+                                     int  method,
+                                     int  windowBits,
+                                     int  memLevel,
+                                     int  strategy));
+
+     This is another version of deflateInit with more compression options.  The
+   fields next_in, zalloc, zfree and opaque must be initialized before by the
+   caller.
+
+     The method parameter is the compression method.  It must be Z_DEFLATED in
+   this version of the library.
+
+     The windowBits parameter is the base two logarithm of the window size
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library.  Larger values of this parameter result in better
+   compression at the expense of memory usage.  The default value is 15 if
+   deflateInit is used instead.
+
+     windowBits can also be -8..-15 for raw deflate.  In this case, -windowBits
+   determines the window size.  deflate() will then generate raw deflate data
+   with no zlib header or trailer, and will not compute an adler32 check value.
+
+     windowBits can also be greater than 15 for optional gzip encoding.  Add
+   16 to windowBits to write a simple gzip header and trailer around the
+   compressed data instead of a zlib wrapper.  The gzip header will have no
+   file name, no extra data, no comment, no modification time (set to zero), no
+   header crc, and the operating system will be set to 255 (unknown).  If a
+   gzip stream is being written, strm->adler is a crc32 instead of an adler32.
+
+     The memLevel parameter specifies how much memory should be allocated
+   for the internal compression state.  memLevel=1 uses minimum memory but is
+   slow and reduces compression ratio; memLevel=9 uses maximum memory for
+   optimal speed.  The default value is 8.  See zconf.h for total memory usage
+   as a function of windowBits and memLevel.
+
+     The strategy parameter is used to tune the compression algorithm.  Use the
+   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+   filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+   string match), or Z_RLE to limit match distances to one (run-length
+   encoding).  Filtered data consists mostly of small values with a somewhat
+   random distribution.  In this case, the compression algorithm is tuned to
+   compress them better.  The effect of Z_FILTERED is to force more Huffman
+   coding and less string matching; it is somewhat intermediate between
+   Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY.  Z_RLE is designed to be almost as
+   fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data.  The
+   strategy parameter only affects the compression ratio but not the
+   correctness of the compressed output even if it is not set appropriately.
+   Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+   decoder for special applications.
+
+     deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+   method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+   incompatible with the version assumed by the caller (ZLIB_VERSION).  msg is
+   set to null if there is no error message.  deflateInit2 does not perform any
+   compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output.  When using the zlib format, this
+   function must be called immediately after deflateInit, deflateInit2 or
+   deflateReset, and before any call of deflate.  When doing raw deflate, this
+   function must be called either before any call of deflate, or immediately
+   after the completion of a deflate block, i.e. after all input has been
+   consumed and all output has been delivered when using any of the flush
+   options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH.  The
+   compressor and decompressor must use exactly the same dictionary (see
+   inflateSetDictionary).
+
+     The dictionary should consist of strings (byte sequences) that are likely
+   to be encountered later in the data to be compressed, with the most commonly
+   used strings preferably put towards the end of the dictionary.  Using a
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy; the data can then be compressed better than
+   with the default empty dictionary.
+
+     Depending on the size of the compression data structures selected by
+   deflateInit or deflateInit2, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size
+   provided in deflateInit or deflateInit2.  Thus the strings most likely to be
+   useful should be put at the end of the dictionary, not at the front.  In
+   addition, the current implementation of deflate will use at most the window
+   size minus 262 bytes of the provided dictionary.
+
+     Upon return of this function, strm->adler is set to the adler32 value
+   of the dictionary; the decompressor may later use this value to determine
+   which dictionary has been used by the compressor.  (The adler32 value
+   applies to the whole dictionary even if only a subset of the dictionary is
+   actually used by the compressor.) If a raw deflate was requested, then the
+   adler32 value is not computed and strm->adler is not set.
+
+     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
+   inconsistent (for example if deflate has already been called for this stream
+   or if not at a block boundary for raw deflate).  deflateSetDictionary does
+   not perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when several compression strategies will be
+   tried, for example when there are several ways of pre-processing the input
+   data with a filter.  The streams that will be discarded should then be freed
+   by calling deflateEnd.  Note that deflateCopy duplicates the internal
+   compression state which can be quite large, so this strategy is slow and can
+   consume lots of memory.
+
+     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to deflateEnd followed by deflateInit,
+   but does not free and reallocate all the internal compression state.  The
+   stream will keep the same compression level and any other attributes that
+   may have been set by deflateInit2.
+
+     deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+                                      int level,
+                                      int strategy));
+/*
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in deflateInit2.  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different strategy.
+   If the compression level is changed, the input available so far is
+   compressed with the old level (and may be flushed); the new level will take
+   effect only at the next call of deflate().
+
+     Before the call of deflateParams, the stream state must be set as for
+   a call of deflate(), since the currently available input may have to be
+   compressed and flushed.  In particular, strm->avail_out must be non-zero.
+
+     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
+   strm->avail_out was zero.
+*/
+
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+                                    int good_length,
+                                    int max_lazy,
+                                    int nice_length,
+                                    int max_chain));
+/*
+     Fine tune deflate's internal compression parameters.  This should only be
+   used by someone who understands the algorithm used by zlib's deflate for
+   searching for the best matching string, and even then only by the most
+   fanatic optimizer trying to squeeze out the last compressed bit for their
+   specific input data.  Read the deflate.c source code for the meaning of the
+   max_lazy, good_length, nice_length, and max_chain parameters.
+
+     deflateTune() can be called after deflateInit() or deflateInit2(), and
+   returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+                                       uLong sourceLen));
+/*
+     deflateBound() returns an upper bound on the compressed size after
+   deflation of sourceLen bytes.  It must be called after deflateInit() or
+   deflateInit2(), and after deflateSetHeader(), if used.  This would be used
+   to allocate an output buffer for deflation in a single pass, and so would be
+   called before deflate().  If that first deflate() call is provided the
+   sourceLen input bytes, an output buffer allocated to the size returned by
+   deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
+   to return Z_STREAM_END.  Note that it is possible for the compressed size to
+   be larger than the value returned by deflateBound() if flush options other
+   than Z_FINISH or Z_NO_FLUSH are used.
+*/
+
+ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
+                                       unsigned *pending,
+                                       int *bits));
+/*
+     deflatePending() returns the number of bytes and bits of output that have
+   been generated, but not yet provided in the available output.  The bytes not
+   provided would be due to the available output space having being consumed.
+   The number of bits of output not provided are between 0 and 7, where they
+   await more bits to join them in order to fill out a full byte.  If pending
+   or bits are Z_NULL, then those values are not set.
+
+     deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+ */
+
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     deflatePrime() inserts bits in the deflate output stream.  The intent
+   is that this function is used to start off the deflate output with the bits
+   leftover from a previous deflate stream when appending to it.  As such, this
+   function can only be used for raw deflate, and must be used before the first
+   deflate() call after a deflateInit2() or deflateReset().  bits must be less
+   than or equal to 16, and that many of the least significant bits of value
+   will be inserted in the output.
+
+     deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
+   room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
+   source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     deflateSetHeader() provides gzip header information for when a gzip
+   stream is requested by deflateInit2().  deflateSetHeader() may be called
+   after deflateInit2() or deflateReset() and before the first call of
+   deflate().  The text, time, os, extra field, name, and comment information
+   in the provided gz_header structure are written to the gzip header (xflag is
+   ignored -- the extra flags are set according to the compression level).  The
+   caller must assure that, if not Z_NULL, name and comment are terminated with
+   a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+   available there.  If hcrc is true, a gzip header crc is included.  Note that
+   the current versions of the command-line version of gzip (up through version
+   1.3.x) do not support header crc's, and will report that it is a "multi-part
+   gzip file" and give up.
+
+     If deflateSetHeader is not used, the default gzip header has text false,
+   the time set to zero, and os set to 255, with no extra, name, or comment
+   fields.  The gzip header is returned to the default state by deflateReset().
+
+     deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+                                     int  windowBits));
+
+     This is another version of inflateInit with an extra parameter.  The
+   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+   before by the caller.
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library.  The default value is 15 if inflateInit is used
+   instead.  windowBits must be greater than or equal to the windowBits value
+   provided to deflateInit2() while compressing, or it must be equal to 15 if
+   deflateInit2() was not used.  If a compressed stream with a larger window
+   size is given as input, inflate() will return with the error code
+   Z_DATA_ERROR instead of trying to allocate a larger window.
+
+     windowBits can also be zero to request that inflate use the window size in
+   the zlib header of the compressed stream.
+
+     windowBits can also be -8..-15 for raw inflate.  In this case, -windowBits
+   determines the window size.  inflate() will then process raw deflate data,
+   not looking for a zlib or gzip header, not generating a check value, and not
+   looking for any check values for comparison at the end of the stream.  This
+   is for use with other formats that use the deflate compressed data format
+   such as zip.  Those formats provide their own check values.  If a custom
+   format is developed using the raw deflate format for compressed data, it is
+   recommended that a check value such as an adler32 or a crc32 be applied to
+   the uncompressed data as is done in the zlib, gzip, and zip formats.  For
+   most applications, the zlib format should be used as is.  Note that comments
+   above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+     windowBits can also be greater than 15 for optional gzip decoding.  Add
+   32 to windowBits to enable zlib and gzip decoding with automatic header
+   detection, or add 16 to decode only the gzip format (the zlib format will
+   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is a
+   crc32 instead of an adler32.
+
+     inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit2 does not perform any decompression
+   apart from possibly reading the zlib header if present: actual decompression
+   will be done by inflate().  (So next_in and avail_in may be modified, but
+   next_out and avail_out are unused and unchanged.) The current implementation
+   of inflateInit2() does not process any header information -- that is
+   deferred until inflate() is called.
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence.  This function must be called immediately after a call of inflate,
+   if that call returned Z_NEED_DICT.  The dictionary chosen by the compressor
+   can be determined from the adler32 value returned by that call of inflate.
+   The compressor and decompressor must use exactly the same dictionary (see
+   deflateSetDictionary).  For raw inflate, this function can be called at any
+   time to set the dictionary.  If the provided dictionary is smaller than the
+   window and there is already data in the window, then the provided dictionary
+   will amend what's there.  The application must insure that the dictionary
+   that was used for compression is provided.
+
+     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
+   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+   expected one (incorrect adler32 value).  inflateSetDictionary does not
+   perform any decompression: this will be done by subsequent calls of
+   inflate().
+*/
+
+ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
+                                             Bytef *dictionary,
+                                             uInt  *dictLength));
+/*
+     Returns the sliding dictionary being maintained by inflate.  dictLength is
+   set to the number of bytes in the dictionary, and that many bytes are copied
+   to dictionary.  dictionary must have enough space, where 32768 bytes is
+   always enough.  If inflateGetDictionary() is called with dictionary equal to
+   Z_NULL, then only the dictionary length is returned, and nothing is copied.
+   Similary, if dictLength is Z_NULL, then it is not set.
+
+     inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+   stream state is inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/*
+     Skips invalid compressed data until a possible full flush point (see above
+   for the description of deflate with Z_FULL_FLUSH) can be found, or until all
+   available input is skipped.  No output is provided.
+
+     inflateSync searches for a 00 00 FF FF pattern in the compressed data.
+   All full flush points have this pattern, but not all occurrences of this
+   pattern are full flush points.
+
+     inflateSync returns Z_OK if a possible full flush point has been found,
+   Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
+   has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
+   In the success case, the application may save the current current value of
+   total_in which indicates where valid compressed data was found.  In the
+   error case, the application may repeatedly call inflateSync, providing more
+   input each time, until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when randomly accessing a large stream.  The
+   first pass through the stream can periodically record the inflate state,
+   allowing restarting inflate at those points when randomly accessing the
+   stream.
+
+     inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to inflateEnd followed by inflateInit,
+   but does not free and reallocate all the internal decompression state.  The
+   stream will keep attributes that may have been set by inflateInit2.
+
+     inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+                                      int windowBits));
+/*
+     This function is the same as inflateReset, but it also permits changing
+   the wrap and window size requests.  The windowBits parameter is interpreted
+   the same as it is for inflateInit2.
+
+     inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+   the windowBits parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     This function inserts bits in the inflate input stream.  The intent is
+   that this function is used to start inflating at a bit position in the
+   middle of a byte.  The provided bits will be used before any bytes are used
+   from next_in.  This function should only be used with raw inflate, and
+   should be used before the first inflate() call after inflateInit2() or
+   inflateReset().  bits must be less than or equal to 16, and that many of the
+   least significant bits of value will be inserted in the input.
+
+     If bits is negative, then the input stream bit buffer is emptied.  Then
+   inflatePrime() can be called again to put bits in the buffer.  This is used
+   to clear out bits leftover after feeding inflate a block description prior
+   to feeding inflate codes.
+
+     inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+     This function returns two values, one in the lower 16 bits of the return
+   value, and the other in the remaining upper bits, obtained by shifting the
+   return value down 16 bits.  If the upper value is -1 and the lower value is
+   zero, then inflate() is currently decoding information outside of a block.
+   If the upper value is -1 and the lower value is non-zero, then inflate is in
+   the middle of a stored block, with the lower value equaling the number of
+   bytes from the input remaining to copy.  If the upper value is not -1, then
+   it is the number of bits back from the current bit position in the input of
+   the code (literal or length/distance pair) currently being processed.  In
+   that case the lower value is the number of bytes already emitted for that
+   code.
+
+     A code is being processed if inflate is waiting for more input to complete
+   decoding of the code, or if it has completed decoding but is waiting for
+   more output space to write the literal or match data.
+
+     inflateMark() is used to mark locations in the input data for random
+   access, which may be at bit positions, and to note those cases where the
+   output of a code may span boundaries of random access blocks.  The current
+   location in the input stream can be determined from avail_in and data_type
+   as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+     inflateMark returns the value noted above or -1 << 16 if the provided
+   source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     inflateGetHeader() requests that gzip header information be stored in the
+   provided gz_header structure.  inflateGetHeader() may be called after
+   inflateInit2() or inflateReset(), and before the first call of inflate().
+   As inflate() processes the gzip stream, head->done is zero until the header
+   is completed, at which time head->done is set to one.  If a zlib stream is
+   being decoded, then head->done is set to -1 to indicate that there will be
+   no gzip header information forthcoming.  Note that Z_BLOCK or Z_TREES can be
+   used to force inflate() to return immediately after header processing is
+   complete and before any actual data is decompressed.
+
+     The text, time, xflags, and os fields are filled in with the gzip header
+   contents.  hcrc is set to true if there is a header CRC.  (The header CRC
+   was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+   contains the maximum number of bytes to write to extra.  Once done is true,
+   extra_len contains the actual extra field length, and extra contains the
+   extra field, or that field truncated if extra_max is less than extra_len.
+   If name is not Z_NULL, then up to name_max characters are written there,
+   terminated with a zero unless the length is greater than name_max.  If
+   comment is not Z_NULL, then up to comm_max characters are written there,
+   terminated with a zero unless the length is greater than comm_max.  When any
+   of extra, name, or comment are not Z_NULL and the respective field is not
+   present in the header, then that field is set to Z_NULL to signal its
+   absence.  This allows the use of deflateSetHeader() with the returned
+   structure to duplicate the header.  However if those fields are set to
+   allocated memory, then the application will need to save those pointers
+   elsewhere so that they can be eventually freed.
+
+     If inflateGetHeader is not used, then the header information is simply
+   discarded.  The header is always checked for validity, including the header
+   CRC if present.  inflateReset() will reset the process to discard the header
+   information.  The application would need to call inflateGetHeader() again to
+   retrieve the header from the next gzip stream.
+
+     inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+                                        unsigned char FAR *window));
+
+     Initialize the internal stream state for decompression using inflateBack()
+   calls.  The fields zalloc, zfree and opaque in strm must be initialized
+   before the call.  If zalloc and zfree are Z_NULL, then the default library-
+   derived memory allocation routines are used.  windowBits is the base two
+   logarithm of the window size, in the range 8..15.  window is a caller
+   supplied buffer of that size.  Except for special applications where it is
+   assured that deflate was used with small window sizes, windowBits must be 15
+   and a 32K byte window must be supplied to be able to decompress general
+   deflate streams.
+
+     See inflateBack() for the usage of these routines.
+
+     inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+   the parameters are invalid, Z_MEM_ERROR if the internal state could not be
+   allocated, or Z_VERSION_ERROR if the version of the library does not match
+   the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *,
+                                z_const unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+                                    in_func in, void FAR *in_desc,
+                                    out_func out, void FAR *out_desc));
+/*
+     inflateBack() does a raw inflate with a single call using a call-back
+   interface for input and output.  This is potentially more efficient than
+   inflate() for file i/o applications, in that it avoids copying between the
+   output and the sliding window by simply making the window itself the output
+   buffer.  inflate() can be faster on modern CPUs when used with large
+   buffers.  inflateBack() trusts the application to not change the output
+   buffer passed by the output function, at least until inflateBack() returns.
+
+     inflateBackInit() must be called first to allocate the internal state
+   and to initialize the state with the user-provided window buffer.
+   inflateBack() may then be used multiple times to inflate a complete, raw
+   deflate stream with each call.  inflateBackEnd() is then called to free the
+   allocated state.
+
+     A raw deflate stream is one with no zlib or gzip header or trailer.
+   This routine would normally be used in a utility that reads zip or gzip
+   files and writes out uncompressed files.  The utility would decode the
+   header and process the trailer on its own, hence this routine expects only
+   the raw deflate stream to decompress.  This is different from the normal
+   behavior of inflate(), which expects either a zlib or gzip header and
+   trailer around the deflate stream.
+
+     inflateBack() uses two subroutines supplied by the caller that are then
+   called by inflateBack() for input and output.  inflateBack() calls those
+   routines until it reads a complete deflate stream and writes out all of the
+   uncompressed data, or until it encounters an error.  The function's
+   parameters and return types are defined above in the in_func and out_func
+   typedefs.  inflateBack() will call in(in_desc, &buf) which should return the
+   number of bytes of provided input, and a pointer to that input in buf.  If
+   there is no input available, in() must return zero--buf is ignored in that
+   case--and inflateBack() will return a buffer error.  inflateBack() will call
+   out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].  out()
+   should return zero on success, or non-zero on failure.  If out() returns
+   non-zero, inflateBack() will return with an error.  Neither in() nor out()
+   are permitted to change the contents of the window provided to
+   inflateBackInit(), which is also the buffer that out() uses to write from.
+   The length written by out() will be at most the window size.  Any non-zero
+   amount of input may be provided by in().
+
+     For convenience, inflateBack() can be provided input on the first call by
+   setting strm->next_in and strm->avail_in.  If that input is exhausted, then
+   in() will be called.  Therefore strm->next_in must be initialized before
+   calling inflateBack().  If strm->next_in is Z_NULL, then in() will be called
+   immediately for input.  If strm->next_in is not Z_NULL, then strm->avail_in
+   must also be initialized, and then if strm->avail_in is not zero, input will
+   initially be taken from strm->next_in[0 ..  strm->avail_in - 1].
+
+     The in_desc and out_desc parameters of inflateBack() is passed as the
+   first parameter of in() and out() respectively when they are called.  These
+   descriptors can be optionally used to pass any information that the caller-
+   supplied in() and out() functions need to do their job.
+
+     On return, inflateBack() will set strm->next_in and strm->avail_in to
+   pass back any unused input that was provided by the last in() call.  The
+   return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+   if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+   in the deflate stream (in which case strm->msg is set to indicate the nature
+   of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+   In the case of Z_BUF_ERROR, an input or output error can be distinguished
+   using strm->next_in which will be Z_NULL only if in() returned an error.  If
+   strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+   non-zero.  (in() will always be called before out(), so strm->next_in is
+   assured to be defined if out() returns non-zero.) Note that inflateBack()
+   cannot return Z_OK.
+*/
+
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+     All memory allocated by inflateBackInit() is freed.
+
+     inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+   state was inconsistent.
+*/
+
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+    Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+     1.0: size of uInt
+     3.2: size of uLong
+     5.4: size of voidpf (pointer)
+     7.6: size of z_off_t
+
+    Compiler, assembler, and debug options:
+     8: DEBUG
+     9: ASMV or ASMINF -- use ASM code
+     10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+     11: 0 (reserved)
+
+    One-time table building (smaller code, but not thread-safe if true):
+     12: BUILDFIXED -- build static block decoding tables when needed
+     13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+     14,15: 0 (reserved)
+
+    Library content (indicates missing functionality):
+     16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+                          deflate code when not needed)
+     17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+                    and decode gzip streams (to avoid linking crc code)
+     18-19: 0 (reserved)
+
+    Operation variations (changes in library functionality):
+     20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+     21: FASTEST -- deflate algorithm with only one, lowest compression level
+     22,23: 0 (reserved)
+
+    The sprintf variant used by gzprintf (zero is best):
+     24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+     25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+     26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+    Remainder:
+     27-31: 0 (reserved)
+ */
+
+#ifndef Z_SOLO
+
+                        /* utility functions */
+
+/*
+     The following utility functions are implemented on top of the basic
+   stream-oriented functions.  To simplify the interface, some default options
+   are assumed (compression level and memory usage, standard memory allocation
+   functions).  The source code of these utility functions can be modified if
+   you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
+                                 const Bytef *source, uLong sourceLen));
+/*
+     Compresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed buffer.
+
+     compress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
+                                  const Bytef *source, uLong sourceLen,
+                                  int level));
+/*
+     Compresses the source buffer into the destination buffer.  The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer.  Upon entry, destLen is the total size of the
+   destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+/*
+     compressBound() returns an upper bound on the compressed size after
+   compress() or compress2() on sourceLen bytes.  It would be used before a
+   compress() or compress2() call to allocate the destination buffer.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+                                   const Bytef *source, uLong sourceLen));
+/*
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be large enough to hold the entire
+   uncompressed data.  (The size of the uncompressed data must have been saved
+   previously by the compressor and transmitted to the decompressor by some
+   mechanism outside the scope of this compression library.) Upon exit, destLen
+   is the actual size of the uncompressed buffer.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.  In
+   the case where there is not enough room, uncompress() will fill the output
+   buffer with the uncompressed data up to that point.
+*/
+
+                        /* gzip file access functions */
+
+/*
+     This library supports reading and writing files in gzip (.gz) format with
+   an interface similar to that of stdio, using the functions that start with
+   "gz".  The gzip format is different from the zlib format.  gzip is a gzip
+   wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
+
+typedef struct gzFile_s *gzFile;    /* semi-opaque gzip file descriptor */
+
+/*
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+     Opens a gzip (.gz) file for reading or writing.  The mode parameter is as
+   in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
+   a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
+   compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
+   for fixed code compression as in "wb9F".  (See the description of
+   deflateInit2 for more information about the strategy parameter.)  'T' will
+   request transparent writing or appending with no compression and not using
+   the gzip format.
+
+     "a" can be used instead of "w" to request that the gzip stream that will
+   be written be appended to the file.  "+" will result in an error, since
+   reading and writing to the same gzip file is not supported.  The addition of
+   "x" when writing will create the file exclusively, which fails if the file
+   already exists.  On systems that support it, the addition of "e" when
+   reading or writing will set the flag to close the file on an execve() call.
+
+     These functions, as well as gzip, will read and decode a sequence of gzip
+   streams in a file.  The append function of gzopen() can be used to create
+   such a file.  (Also see gzflush() for another way to do this.)  When
+   appending, gzopen does not test whether the file begins with a gzip stream,
+   nor does it look for the end of the gzip streams to begin appending.  gzopen
+   will simply append a gzip stream to the existing file.
+
+     gzopen can be used to read a file which is not in gzip format; in this
+   case gzread will directly read from the file without decompression.  When
+   reading, this will be detected automatically by looking for the magic two-
+   byte gzip header.
+
+     gzopen returns NULL if the file could not be opened, if there was
+   insufficient memory to allocate the gzFile state, or if an invalid mode was
+   specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+   errno can be checked to determine if the reason gzopen failed was that the
+   file could not be opened.
+*/
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+     gzdopen associates a gzFile with the file descriptor fd.  File descriptors
+   are obtained from calls like open, dup, creat, pipe or fileno (if the file
+   has been previously opened with fopen).  The mode parameter is as in gzopen.
+
+     The next call of gzclose on the returned gzFile will also close the file
+   descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+   fd.  If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+   mode);.  The duplicated descriptor should be saved to avoid a leak, since
+   gzdopen does not close fd if it fails.  If you are using fileno() to get the
+   file descriptor from a FILE *, then you will have to use dup() to avoid
+   double-close()ing the file descriptor.  Both gzclose() and fclose() will
+   close the associated file descriptor, so they need to have different file
+   descriptors.
+
+     gzdopen returns NULL if there was insufficient memory to allocate the
+   gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+   provided, or '+' was provided), or if fd is -1.  The file descriptor is not
+   used until the next gz* read, write, seek, or close operation, so gzdopen
+   will not detect if fd is invalid (unless fd is -1).
+*/
+
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+     Set the internal buffer size used by this library's functions.  The
+   default buffer size is 8192 bytes.  This function must be called after
+   gzopen() or gzdopen(), and before any other calls that read or write the
+   file.  The buffer memory allocation is always deferred to the first read or
+   write.  Two buffers are allocated, either both of the specified size when
+   writing, or one of the specified size and the other twice that size when
+   reading.  A larger buffer size of, for example, 64K or 128K bytes will
+   noticeably increase the speed of decompression (reading).
+
+     The new buffer size also affects the maximum length for gzprintf().
+
+     gzbuffer() returns 0 on success, or -1 on failure, such as being called
+   too late.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+     Dynamically update the compression level or strategy.  See the description
+   of deflateInit2 for the meaning of these parameters.
+
+     gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
+   opened for writing.
+*/
+
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+/*
+     Reads the given number of uncompressed bytes from the compressed file.  If
+   the input file is not in gzip format, gzread copies the given number of
+   bytes into the buffer directly from the file.
+
+     After reaching the end of a gzip stream in the input, gzread will continue
+   to read, looking for another gzip stream.  Any number of gzip streams may be
+   concatenated in the input file, and will all be decompressed by gzread().
+   If something other than a gzip stream is encountered after a gzip stream,
+   that remaining trailing garbage is ignored (and no error is returned).
+
+     gzread can be used to read a gzip file that is being concurrently written.
+   Upon reaching the end of the input, gzread will return with the available
+   data.  If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
+   gzclearerr can be used to clear the end of file indicator in order to permit
+   gzread to be tried again.  Z_OK indicates that a gzip stream was completed
+   on the last gzread.  Z_BUF_ERROR indicates that the input file ended in the
+   middle of a gzip stream.  Note that gzread does not return -1 in the event
+   of an incomplete gzip stream.  This error is deferred until gzclose(), which
+   will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
+   stream.  Alternatively, gzerror can be used before gzclose to detect this
+   case.
+
+     gzread returns the number of uncompressed bytes actually read, less than
+   len for end of file, or -1 for error.
+*/
+
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+                                voidpc buf, unsigned len));
+/*
+     Writes the given number of uncompressed bytes into the compressed file.
+   gzwrite returns the number of uncompressed bytes written or 0 in case of
+   error.
+*/
+
+ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
+/*
+     Converts, formats, and writes the arguments to the compressed file under
+   control of the format string, as in fprintf.  gzprintf returns the number of
+   uncompressed bytes actually written, or 0 in case of error.  The number of
+   uncompressed bytes written is limited to 8191, or one less than the buffer
+   size given to gzbuffer().  The caller should assure that this limit is not
+   exceeded.  If it is exceeded, then gzprintf() will return an error (0) with
+   nothing written.  In this case, there may also be a buffer overflow with
+   unpredictable consequences, which is possible only if zlib was compiled with
+   the insecure functions sprintf() or vsprintf() because the secure snprintf()
+   or vsnprintf() functions were not available.  This can be determined using
+   zlibCompileFlags().
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+     Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+
+     gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+     Reads bytes from the compressed file until len-1 characters are read, or a
+   newline character is read and transferred to buf, or an end-of-file
+   condition is encountered.  If any characters are read or if len == 1, the
+   string is terminated with a null character.  If no characters are read due
+   to an end-of-file or len < 1, then the buffer is left untouched.
+
+     gzgets returns buf which is a null-terminated string, or it returns NULL
+   for end-of-file or in case of error.  If there was an error, the contents at
+   buf are indeterminate.
+*/
+
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+/*
+     Writes c, converted to an unsigned char, into the compressed file.  gzputc
+   returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+/*
+     Reads one byte from the compressed file.  gzgetc returns this byte or -1
+   in case of end of file or error.  This is implemented as a macro for speed.
+   As such, it does not do all of the checking the other functions do.  I.e.
+   it does not check to see if file is NULL, nor whether the structure file
+   points to has been clobbered or not.
+*/
+
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
+/*
+     Push one character back onto the stream to be read as the first character
+   on the next read.  At least one character of push-back is allowed.
+   gzungetc() returns the character pushed, or -1 on failure.  gzungetc() will
+   fail if c is -1, and may fail if a character has been pushed but not read
+   yet.  If gzungetc is used immediately after gzopen or gzdopen, at least the
+   output buffer size of pushed characters is allowed.  (See gzbuffer above.)
+   The pushed character will be discarded if the stream is repositioned with
+   gzseek() or gzrewind().
+*/
+
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+/*
+     Flushes all pending output into the compressed file.  The parameter flush
+   is as in the deflate() function.  The return value is the zlib error number
+   (see function gzerror below).  gzflush is only permitted when writing.
+
+     If the flush parameter is Z_FINISH, the remaining data is written and the
+   gzip stream is completed in the output.  If gzwrite() is called again, a new
+   gzip stream will be started in the output.  gzread() is able to read such
+   concatented gzip streams.
+
+     gzflush should be called only when strictly necessary because it will
+   degrade compression if called too often.
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+                                   z_off_t offset, int whence));
+
+     Sets the starting position for the next gzread or gzwrite on the given
+   compressed file.  The offset represents a number of bytes in the
+   uncompressed data stream.  The whence parameter is defined as in lseek(2);
+   the value SEEK_END is not supported.
+
+     If the file is opened for reading, this function is emulated but can be
+   extremely slow.  If the file is opened for writing, only forward seeks are
+   supported; gzseek then compresses a sequence of zeroes up to the new
+   starting position.
+
+     gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error, in
+   particular if the file is opened for writing and the new starting position
+   would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
+/*
+     Rewinds the given file. This function is supported only for reading.
+
+     gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
+
+     Returns the starting position for the next gzread or gzwrite on the given
+   compressed file.  This position represents a number of bytes in the
+   uncompressed data stream, and is zero when starting, even if appending or
+   reading a gzip stream from the middle of a file using gzdopen().
+
+     gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+
+     Returns the current offset in the file being read or written.  This offset
+   includes the count of bytes that precede the gzip stream, for example when
+   appending or when using gzdopen() for reading.  When reading, the offset
+   does not include as yet unused buffered input.  This information can be used
+   for a progress indicator.  On error, gzoffset() returns -1.
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+     Returns true (1) if the end-of-file indicator has been set while reading,
+   false (0) otherwise.  Note that the end-of-file indicator is set only if the
+   read tried to go past the end of the input, but came up short.  Therefore,
+   just like feof(), gzeof() may return false even if there is no more data to
+   read, in the event that the last read request was for the exact number of
+   bytes remaining in the input file.  This will happen if the input file size
+   is an exact multiple of the buffer size.
+
+     If gzeof() returns true, then the read functions will return no more data,
+   unless the end-of-file indicator is reset by gzclearerr() and the input file
+   has grown since the previous end of file was detected.
+*/
+
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+     Returns true (1) if file is being copied directly while reading, or false
+   (0) if file is a gzip stream being decompressed.
+
+     If the input file is empty, gzdirect() will return true, since the input
+   does not contain a gzip stream.
+
+     If gzdirect() is used immediately after gzopen() or gzdopen() it will
+   cause buffers to be allocated to allow reading the file to determine if it
+   is a gzip file.  Therefore if gzbuffer() is used, it should be called before
+   gzdirect().
+
+     When writing, gzdirect() returns true (1) if transparent writing was
+   requested ("wT" for the gzopen() mode), or false (0) otherwise.  (Note:
+   gzdirect() is not needed when writing.  Transparent writing must be
+   explicitly requested, so the application already knows the answer.  When
+   linking statically, using gzdirect() will include all of the zlib code for
+   gzip file reading and decompression, which may not be desired.)
+*/
+
+ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
+/*
+     Flushes all pending output if necessary, closes the compressed file and
+   deallocates the (de)compression state.  Note that once file is closed, you
+   cannot call gzerror with file, since its structures have been deallocated.
+   gzclose must not be called more than once on the same file, just as free
+   must not be called more than once on the same allocation.
+
+     gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+   file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
+   last read ended in the middle of a gzip stream, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+     Same as gzclose(), but gzclose_r() is only for use when reading, and
+   gzclose_w() is only for use when writing or appending.  The advantage to
+   using these instead of gzclose() is that they avoid linking in zlib
+   compression or decompression code that is not used when only reading or only
+   writing respectively.  If gzclose() is used, then both compression and
+   decompression code will be included the application when linking to a static
+   zlib library.
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+     Returns the error message for the last error which occurred on the given
+   compressed file.  errnum is set to zlib error number.  If an error occurred
+   in the file system and not in the compression library, errnum is set to
+   Z_ERRNO and the application may consult errno to get the exact error code.
+
+     The application must not modify the returned string.  Future calls to
+   this function may invalidate the previously returned string.  If file is
+   closed, then the string previously returned by gzerror will no longer be
+   available.
+
+     gzerror() should be used to distinguish errors from end-of-file for those
+   functions above that do not distinguish those cases in their return values.
+*/
+
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+     Clears the error and end-of-file flags for file.  This is analogous to the
+   clearerr() function in stdio.  This is useful for continuing to read a gzip
+   file that is being written concurrently.
+*/
+
+#endif /* !Z_SOLO */
+
+                        /* checksum functions */
+
+/*
+     These functions are not related to compression but are exported
+   anyway because they might be useful in applications using the compression
+   library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+/*
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum.  If buf is Z_NULL, this function returns the
+   required initial value for the checksum.
+
+     An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+   much faster.
+
+   Usage example:
+
+     uLong adler = adler32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+                                          z_off_t len2));
+
+     Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
+   and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+   each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
+   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.  Note
+   that the z_off_t type (like off_t) is a signed integer.  If len2 is
+   negative, the result has no meaning or utility.
+*/
+
+ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
+/*
+     Update a running CRC-32 with the bytes buf[0..len-1] and return the
+   updated CRC-32.  If buf is Z_NULL, this function returns the required
+   initial value for the crc.  Pre- and post-conditioning (one's complement) is
+   performed within this function so it shouldn't be done by the application.
+
+   Usage example:
+
+     uLong crc = crc32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       crc = crc32(crc, buffer, length);
+     }
+     if (crc != original_crc) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+     Combine two CRC-32 check values into one.  For two sequences of bytes,
+   seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+   calculated for each, crc1 and crc2.  crc32_combine() returns the CRC-32
+   check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+   len2.
+*/
+
+
+                        /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+                                      int windowBits, int memLevel,
+                                      int strategy, const char *version,
+                                      int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                      const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+                                         unsigned char FAR *window,
+                                         const char *version,
+                                         int stream_size));
+#define deflateInit(strm, level) \
+        deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#define inflateInit(strm) \
+        inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                      (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#define inflateInit2(strm, windowBits) \
+        inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                      (int)sizeof(z_stream))
+#define inflateBackInit(strm, windowBits, window) \
+        inflateBackInit_((strm), (windowBits), (window), \
+                      ZLIB_VERSION, (int)sizeof(z_stream))
+
+#ifndef Z_SOLO
+
+/* gzgetc() macro and its supporting function and exposed data structure.  Note
+ * that the real internal state is much larger than the exposed structure.
+ * This abbreviated structure exposes just enough for the gzgetc() macro.  The
+ * user should not mess with these exposed elements, since their names or
+ * behavior could change in the future, perhaps even capriciously.  They can
+ * only be used by the gzgetc() macro.  You have been warned.
+ */
+struct gzFile_s {
+    unsigned have;
+    unsigned char *next;
+    z_off64_t pos;
+};
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
+#ifdef Z_PREFIX_SET
+#  undef z_gzgetc
+#  define z_gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+#else
+#  define gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+#endif
+
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#ifdef Z_LARGE64
+   ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+   ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+   ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+   ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
+#  ifdef Z_PREFIX_SET
+#    define z_gzopen z_gzopen64
+#    define z_gzseek z_gzseek64
+#    define z_gztell z_gztell64
+#    define z_gzoffset z_gzoffset64
+#    define z_adler32_combine z_adler32_combine64
+#    define z_crc32_combine z_crc32_combine64
+#  else
+#    define gzopen gzopen64
+#    define gzseek gzseek64
+#    define gztell gztell64
+#    define gzoffset gzoffset64
+#    define adler32_combine adler32_combine64
+#    define crc32_combine crc32_combine64
+#  endif
+#  ifndef Z_LARGE64
+     ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+     ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+     ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+     ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+#  endif
+#else
+   ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+   ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+   ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+   ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
+
+#else /* Z_SOLO */
+
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+
+#endif /* !Z_SOLO */
+
+/* hack for buggy compilers */
+#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
+    struct internal_state {int dummy;};
+#endif
+
+/* undocumented functions */
+ZEXTERN const char   * ZEXPORT zError           OF((int));
+ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
+ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
+ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
+ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
+#if defined(_WIN32) && !defined(Z_SOLO)
+ZEXTERN gzFile         ZEXPORT gzopen_w OF((const wchar_t *path,
+                                            const char *mode));
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifndef Z_SOLO
+ZEXTERN int            ZEXPORTVA gzvprintf Z_ARG((gzFile file,
+                                                  const char *format,
+                                                  va_list va));
+#  endif
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZLIB_H */
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/zutil.c	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,348 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* zutil.c -- target dependent utility functions for the compression library
+ * Copyright (C) 1995-2005, 2010, 2011, 2012 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+#ifndef Z_SOLO
+#  include "gzguts.h"
+#endif
+
+#ifndef NO_DUMMY_DECL
+struct internal_state      {int dummy;}; /* for buggy compilers */
+#endif
+
+z_const char * const z_errmsg[10] = {
+"need dictionary",     /* Z_NEED_DICT       2  */
+"stream end",          /* Z_STREAM_END      1  */
+"",                    /* Z_OK              0  */
+"file error",          /* Z_ERRNO         (-1) */
+"stream error",        /* Z_STREAM_ERROR  (-2) */
+"data error",          /* Z_DATA_ERROR    (-3) */
+"insufficient memory", /* Z_MEM_ERROR     (-4) */
+"buffer error",        /* Z_BUF_ERROR     (-5) */
+"incompatible version",/* Z_VERSION_ERROR (-6) */
+""};
+
+
+const char * ZEXPORT zlibVersion()
+{
+    return ZLIB_VERSION;
+}
+
+uLong ZEXPORT zlibCompileFlags()
+{
+    uLong flags;
+
+    flags = 0;
+    switch ((int)(sizeof(uInt))) {
+    case 2:     break;
+    case 4:     flags += 1;     break;
+    case 8:     flags += 2;     break;
+    default:    flags += 3;
+    }
+    switch ((int)(sizeof(uLong))) {
+    case 2:     break;
+    case 4:     flags += 1 << 2;        break;
+    case 8:     flags += 2 << 2;        break;
+    default:    flags += 3 << 2;
+    }
+    switch ((int)(sizeof(voidpf))) {
+    case 2:     break;
+    case 4:     flags += 1 << 4;        break;
+    case 8:     flags += 2 << 4;        break;
+    default:    flags += 3 << 4;
+    }
+    switch ((int)(sizeof(z_off_t))) {
+    case 2:     break;
+    case 4:     flags += 1 << 6;        break;
+    case 8:     flags += 2 << 6;        break;
+    default:    flags += 3 << 6;
+    }
+#ifdef DEBUG
+    flags += 1 << 8;
+#endif
+#if defined(ASMV) || defined(ASMINF)
+    flags += 1 << 9;
+#endif
+#ifdef ZLIB_WINAPI
+    flags += 1 << 10;
+#endif
+#ifdef BUILDFIXED
+    flags += 1 << 12;
+#endif
+#ifdef DYNAMIC_CRC_TABLE
+    flags += 1 << 13;
+#endif
+#ifdef NO_GZCOMPRESS
+    flags += 1L << 16;
+#endif
+#ifdef NO_GZIP
+    flags += 1L << 17;
+#endif
+#ifdef PKZIP_BUG_WORKAROUND
+    flags += 1L << 20;
+#endif
+#ifdef FASTEST
+    flags += 1L << 21;
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifdef NO_vsnprintf
+    flags += 1L << 25;
+#    ifdef HAS_vsprintf_void
+    flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_vsnprintf_void
+    flags += 1L << 26;
+#    endif
+#  endif
+#else
+    flags += 1L << 24;
+#  ifdef NO_snprintf
+    flags += 1L << 25;
+#    ifdef HAS_sprintf_void
+    flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_snprintf_void
+    flags += 1L << 26;
+#    endif
+#  endif
+#endif
+    return flags;
+}
+
+#ifdef DEBUG
+
+#  ifndef verbose
+#    define verbose 0
+#  endif
+int ZLIB_INTERNAL z_verbose = verbose;
+
+void ZLIB_INTERNAL z_error (m)
+    char *m;
+{
+    fprintf(stderr, "%s\n", m);
+    exit(1);
+}
+#endif
+
+/* exported to allow conversion of error code to string for compress() and
+ * uncompress()
+ */
+const char * ZEXPORT zError(err)
+    int err;
+{
+    return ERR_MSG(err);
+}
+
+#if defined(_WIN32_WCE)
+    /* The Microsoft C Run-Time Library for Windows CE doesn't have
+     * errno.  We define it as a global variable to simplify porting.
+     * Its value is always 0 and should not be used.
+     */
+    int errno = 0;
+#endif
+
+#ifndef HAVE_MEMCPY
+
+void ZLIB_INTERNAL zmemcpy(dest, source, len)
+    Bytef* dest;
+    const Bytef* source;
+    uInt  len;
+{
+    if (len == 0) return;
+    do {
+        *dest++ = *source++; /* ??? to be unrolled */
+    } while (--len != 0);
+}
+
+int ZLIB_INTERNAL zmemcmp(s1, s2, len)
+    const Bytef* s1;
+    const Bytef* s2;
+    uInt  len;
+{
+    uInt j;
+
+    for (j = 0; j < len; j++) {
+        if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
+    }
+    return 0;
+}
+
+void ZLIB_INTERNAL zmemzero(dest, len)
+    Bytef* dest;
+    uInt  len;
+{
+    if (len == 0) return;
+    do {
+        *dest++ = 0;  /* ??? to be unrolled */
+    } while (--len != 0);
+}
+#endif
+
+#ifndef Z_SOLO
+
+#ifdef SYS16BIT
+
+#ifdef __TURBOC__
+/* Turbo C in 16-bit mode */
+
+#  define MY_ZCALLOC
+
+/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
+ * and farmalloc(64K) returns a pointer with an offset of 8, so we
+ * must fix the pointer. Warning: the pointer must be put back to its
+ * original form in order to free it, use zcfree().
+ */
+
+#define MAX_PTR 10
+/* 10*64K = 640K */
+
+local int next_ptr = 0;
+
+typedef struct ptr_table_s {
+    voidpf org_ptr;
+    voidpf new_ptr;
+} ptr_table;
+
+local ptr_table table[MAX_PTR];
+/* This table is used to remember the original form of pointers
+ * to large buffers (64K). Such pointers are normalized with a zero offset.
+ * Since MSDOS is not a preemptive multitasking OS, this table is not
+ * protected from concurrent access. This hack doesn't work anyway on
+ * a protected system like OS/2. Use Microsoft C instead.
+ */
+
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+    voidpf buf = opaque; /* just to make some compilers happy */
+    ulg bsize = (ulg)items*size;
+
+    /* If we allocate less than 65520 bytes, we assume that farmalloc
+     * will return a usable pointer which doesn't have to be normalized.
+     */
+    if (bsize < 65520L) {
+        buf = farmalloc(bsize);
+        if (*(ush*)&buf != 0) return buf;
+    } else {
+        buf = farmalloc(bsize + 16L);
+    }
+    if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
+    table[next_ptr].org_ptr = buf;
+
+    /* Normalize the pointer to seg:0 */
+    *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
+    *(ush*)&buf = 0;
+    table[next_ptr++].new_ptr = buf;
+    return buf;
+}
+
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
+{
+    int n;
+    if (*(ush*)&ptr != 0) { /* object < 64K */
+        farfree(ptr);
+        return;
+    }
+    /* Find the original pointer */
+    for (n = 0; n < next_ptr; n++) {
+        if (ptr != table[n].new_ptr) continue;
+
+        farfree(table[n].org_ptr);
+        while (++n < next_ptr) {
+            table[n-1] = table[n];
+        }
+        next_ptr--;
+        return;
+    }
+    ptr = opaque; /* just to make some compilers happy */
+    Assert(0, "zcfree: ptr not found");
+}
+
+#endif /* __TURBOC__ */
+
+
+#ifdef M_I86
+/* Microsoft C in 16-bit mode */
+
+#  define MY_ZCALLOC
+
+#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
+#  define _halloc  halloc
+#  define _hfree   hfree
+#endif
+
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
+{
+    if (opaque) opaque = 0; /* to make compiler happy */
+    return _halloc((long)items, size);
+}
+
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
+{
+    if (opaque) opaque = 0; /* to make compiler happy */
+    _hfree(ptr);
+}
+
+#endif /* M_I86 */
+
+#endif /* SYS16BIT */
+
+
+#ifndef MY_ZCALLOC /* Any system without a special alloc function */
+
+#ifndef STDC
+extern voidp  malloc OF((uInt size));
+extern voidp  calloc OF((uInt items, uInt size));
+extern void   free   OF((voidpf ptr));
+#endif
+
+voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
+    voidpf opaque;
+    unsigned items;
+    unsigned size;
+{
+    if (opaque) items += size - size; /* make compiler happy */
+    return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
+                              (voidpf)calloc(items, size);
+}
+
+void ZLIB_INTERNAL zcfree (opaque, ptr)
+    voidpf opaque;
+    voidpf ptr;
+{
+    free(ptr);
+    if (opaque) return; /* make compiler happy */
+}
+
+#endif /* MY_ZCALLOC */
+
+#endif /* !Z_SOLO */
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/native/java/util/zip/zlib-1.2.8/zutil.h	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,277 @@
+/*
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.  Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995-2013 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZUTIL_H
+#define ZUTIL_H
+
+#ifdef HAVE_HIDDEN
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
+
+#include "zlib.h"
+
+#if defined(STDC) && !defined(Z_SOLO)
+#  if !(defined(_WIN32_WCE) && defined(_MSC_VER))
+#    include <stddef.h>
+#  endif
+#  include <string.h>
+#  include <stdlib.h>
+#endif
+
+#ifdef Z_SOLO
+   typedef long ptrdiff_t;  /* guess -- will be caught if guess is wrong */
+#endif
+
+#ifndef local
+#  define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+typedef unsigned char  uch;
+typedef uch FAR uchf;
+typedef unsigned short ush;
+typedef ush FAR ushf;
+typedef unsigned long  ulg;
+
+extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+/* (size given to avoid silly warnings with Visual C++) */
+
+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
+
+#define ERR_RETURN(strm,err) \
+  return (strm->msg = ERR_MSG(err), (err))
+/* To be used only when the state is known to be valid */
+
+        /* common constants */
+
+#ifndef DEF_WBITS
+#  define DEF_WBITS MAX_WBITS
+#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#endif
+/* default memLevel */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES    2
+/* The three kinds of block type */
+
+#define MIN_MATCH  3
+#define MAX_MATCH  258
+/* The minimum and maximum match lengths */
+
+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
+
+        /* target dependencies */
+
+#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
+#  define OS_CODE  0x00
+#  ifndef Z_SOLO
+#    if defined(__TURBOC__) || defined(__BORLANDC__)
+#      if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+         /* Allow compilation with ANSI keywords only enabled */
+         void _Cdecl farfree( void *block );
+         void *_Cdecl farmalloc( unsigned long nbytes );
+#      else
+#        include <alloc.h>
+#      endif
+#    else /* MSC or DJGPP */
+#      include <malloc.h>
+#    endif
+#  endif
+#endif
+
+#ifdef AMIGA
+#  define OS_CODE  0x01
+#endif
+
+#if defined(VAXC) || defined(VMS)
+#  define OS_CODE  0x02
+#  define F_OPEN(name, mode) \
+     fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
+#endif
+
+#if defined(ATARI) || defined(atarist)
+#  define OS_CODE  0x05
+#endif
+
+#ifdef OS2
+#  define OS_CODE  0x06
+#  if defined(M_I86) && !defined(Z_SOLO)
+#    include <malloc.h>
+#  endif
+#endif
+
+#if defined(MACOS) || defined(TARGET_OS_MAC)
+#  define OS_CODE  0x07
+#  ifndef Z_SOLO
+#    if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+#      include <unix.h> /* for fdopen */
+#    else
+#      ifndef fdopen
+#        define fdopen(fd,mode) NULL /* No fdopen() */
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef TOPS20
+#  define OS_CODE  0x0a
+#endif
+
+#ifdef WIN32
+#  ifndef __CYGWIN__  /* Cygwin is Unix, not Win32 */
+#    define OS_CODE  0x0b
+#  endif
+#endif
+
+#ifdef __50SERIES /* Prime/PRIMOS */
+#  define OS_CODE  0x0f
+#endif
+
+#if defined(_BEOS_) || defined(RISCOS)
+#  define fdopen(fd,mode) NULL /* No fdopen() */
+#endif
+
+#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX
+#  if defined(_WIN32_WCE)
+#    define fdopen(fd,mode) NULL /* No fdopen() */
+#    ifndef _PTRDIFF_T_DEFINED
+       typedef int ptrdiff_t;
+#      define _PTRDIFF_T_DEFINED
+#    endif
+#  else
+#    define fdopen(fd,type)  _fdopen(fd,type)
+#  endif
+#endif
+
+#if defined(__BORLANDC__) && !defined(MSDOS)
+  #pragma warn -8004
+  #pragma warn -8008
+  #pragma warn -8066
+#endif
+
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_WIN32) && \
+    (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
+    ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+#endif
+
+        /* common defaults */
+
+#ifndef OS_CODE
+#  define OS_CODE  0x03  /* assume Unix */
+#endif
+
+#ifndef F_OPEN
+#  define F_OPEN(name, mode) fopen((name), (mode))
+#endif
+
+         /* functions */
+
+#if defined(pyr) || defined(Z_SOLO)
+#  define NO_MEMCPY
+#endif
+#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
+ /* Use our own functions for small and medium model with MSC <= 5.0.
+  * You may have to use the same strategy for Borland C (untested).
+  * The __SC__ check is for Symantec.
+  */
+#  define NO_MEMCPY
+#endif
+#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
+#  define HAVE_MEMCPY
+#endif
+#ifdef HAVE_MEMCPY
+#  ifdef SMALL_MEDIUM /* MSDOS small or medium model */
+#    define zmemcpy _fmemcpy
+#    define zmemcmp _fmemcmp
+#    define zmemzero(dest, len) _fmemset(dest, 0, len)
+#  else
+#    define zmemcpy memcpy
+#    define zmemcmp memcmp
+#    define zmemzero(dest, len) memset(dest, 0, len)
+#  endif
+#else
+   void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
+   int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
+   void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
+#endif
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  include <stdio.h>
+   extern int ZLIB_INTERNAL z_verbose;
+   extern void ZLIB_INTERNAL z_error OF((char *m));
+#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
+#  define Trace(x) {if (z_verbose>=0) fprintf x ;}
+#  define Tracev(x) {if (z_verbose>0) fprintf x ;}
+#  define Tracevv(x) {if (z_verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+#ifndef Z_SOLO
+   voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
+                                    unsigned size));
+   void ZLIB_INTERNAL zcfree  OF((voidpf opaque, voidpf ptr));
+#endif
+
+#define ZALLOC(strm, items, size) \
+           (*((strm)->zalloc))((strm)->opaque, (items), (size))
+#define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
+#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
+
+/* Reverse the bytes in a 32-bit value */
+#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+                    (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
+#endif /* ZUTIL_H */
--- a/jdk/src/windows/transport/shmem/shmem_md.c	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/src/windows/transport/shmem/shmem_md.c	Wed Jul 05 19:43:34 2017 +0200
@@ -200,6 +200,17 @@
     rc = WaitForMultipleObjects(count, handles,
                                 FALSE,              /* wait for either, not both */
                                 INFINITE);          /* infinite timeout */
+
+    /* If the mutex is abandoned we will consider this a fatal error
+     * and abort with appropriate message.
+     *
+     * Note that only mutexes can be abandoned and that our mutex is
+     * always at position 0 in the handles array. Thus we only need
+     * to check WAIT_ABANDONED_0 (not WAIT_ABANDONED_0 + x).
+     */
+    if (rc == WAIT_ABANDONED_0) {
+        exitTransportWithError("Observed abandoned IP mutex. Aborting.",THIS_FILE, __DATE__, __LINE__);
+    }
     return (rc == WAIT_OBJECT_0) ? SYS_OK : SYS_ERR;
 }
 
--- a/jdk/test/demo/jvmti/mtrace/JFrameCreateTime.java	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,59 +0,0 @@
-/*
- * Copyright (c) 2004, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-
-/* JFrameCreateTime:
- *
- * Example swing application that just creates a JFrame object.
- *
- */
-
-/* Early in 1.5 it was reported that doing a step into the first JFrame
- *   was very slow (VisualMust debugger people reported this).
- */
-
-import java.awt.GraphicsEnvironment;
-import javax.swing.*;
-
-public class JFrameCreateTime {
-    public static void main(String[] args) {
-        JFrame f;
-        long start, end;
-        if (GraphicsEnvironment.isHeadless()) {
-            System.out.println("JFrameCreateTime test was skipped due to headless mode");
-        } else {
-            start = System.currentTimeMillis();
-            f = new JFrame("JFrame");
-            end = System.currentTimeMillis();
-
-            System.out.println("JFrame first creation took " + (end - start) + " ms");
-
-            start = System.currentTimeMillis();
-            f = new JFrame("JFrame");
-            end = System.currentTimeMillis();
-
-            System.out.println("JFrame second creation took " + (end - start) + " ms");
-            System.exit(0);
-        }
-    }
-}
--- a/jdk/test/demo/jvmti/mtrace/TraceJFrame.java	Wed Jun 04 20:20:02 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,57 +0,0 @@
-/*
- * Copyright (c) 2004, 2012, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-
-/* @test
- * @bug 5000000 6299047
- * @summary Test jvmti demo mtrace
- *
- * @compile ../DemoRun.java
- * @compile JFrameCreateTime.java
- * @build TraceJFrame
- * @run main TraceJFrame JFrameCreateTime
- */
-
-import java.awt.GraphicsEnvironment;
-
-public class TraceJFrame {
-    public static void main(String args[]) throws Exception {
-        if (GraphicsEnvironment.isHeadless()) {
-            System.out.println("TraceJFrame test was skipped due to headless mode");
-        } else {
-            DemoRun demo;
-
-            /* Run demo that uses JVMTI mtrace agent (no options) */
-            demo = new DemoRun("mtrace", "" /* options to mtrace */ );
-            demo.runit(args[0]);
-
-            /* Make sure patterns in output look ok */
-            if (demo.output_contains("ERROR")) {
-                throw new RuntimeException("Test failed - ERROR seen in output");
-            }
-
-            /* Must be a pass. */
-            System.out.println("Test passed - cleanly terminated");
-        }
-    }
-}
--- a/jdk/test/java/lang/ProcessBuilder/Basic.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/lang/ProcessBuilder/Basic.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2003, 2013, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2003, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -937,18 +937,13 @@
         equal(pb.redirectError(), Redirect.to(efile));
 
         THROWS(IllegalArgumentException.class,
-            new Fun(){void f() {
-                pb.redirectInput(Redirect.to(ofile)); }},
-            new Fun(){void f() {
-                pb.redirectInput(Redirect.appendTo(ofile)); }},
-            new Fun(){void f() {
-                pb.redirectOutput(Redirect.from(ifile)); }},
-            new Fun(){void f() {
-                pb.redirectError(Redirect.from(ifile)); }});
+               () -> pb.redirectInput(Redirect.to(ofile)),
+               () -> pb.redirectOutput(Redirect.from(ifile)),
+               () -> pb.redirectError(Redirect.from(ifile)));
 
         THROWS(IOException.class,
                // Input file does not exist
-               new Fun(){void f() throws Throwable { pb.start(); }});
+               () -> pb.start());
         setFileContents(ifile, "standard input");
 
         //----------------------------------------------------------------
@@ -1084,18 +1079,15 @@
                 = new FilePermission("<<ALL FILES>>", "read,write,execute");
 
             THROWS(SecurityException.class,
-               new Fun() { void f() throws IOException {
-                   policy.setPermissions(xPermission);
-                   redirectIO(pb, from(tmpFile), PIPE, PIPE);
-                   pb.start();}},
-               new Fun() { void f() throws IOException {
-                   policy.setPermissions(rxPermission);
-                   redirectIO(pb, PIPE, to(ofile), PIPE);
-                   pb.start();}},
-               new Fun() { void f() throws IOException {
-                   policy.setPermissions(rxPermission);
-                   redirectIO(pb, PIPE, PIPE, to(efile));
-                   pb.start();}});
+                   () -> { policy.setPermissions(xPermission);
+                           redirectIO(pb, from(tmpFile), PIPE, PIPE);
+                           pb.start();},
+                   () -> { policy.setPermissions(rxPermission);
+                           redirectIO(pb, PIPE, to(ofile), PIPE);
+                           pb.start();},
+                   () -> { policy.setPermissions(rxPermission);
+                           redirectIO(pb, PIPE, PIPE, to(efile));
+                           pb.start();});
 
             {
                 policy.setPermissions(rxPermission);
@@ -1258,10 +1250,10 @@
         // System.getenv() is read-only.
         //----------------------------------------------------------------
         THROWS(UnsupportedOperationException.class,
-            new Fun(){void f(){ getenv().put("FOO","BAR");}},
-            new Fun(){void f(){ getenv().remove("PATH");}},
-            new Fun(){void f(){ getenv().keySet().remove("PATH");}},
-            new Fun(){void f(){ getenv().values().remove("someValue");}});
+               () -> getenv().put("FOO","BAR"),
+               () -> getenv().remove("PATH"),
+               () -> getenv().keySet().remove("PATH"),
+               () -> getenv().values().remove("someValue"));
 
         try {
             Collection<Map.Entry<String,String>> c = getenv().entrySet();
@@ -1286,19 +1278,17 @@
         {
             final Map<String,String> m = new ProcessBuilder().environment();
             THROWS(IllegalArgumentException.class,
-                new Fun(){void f(){ m.put("FOO=","BAR");}},
-                new Fun(){void f(){ m.put("FOO\u0000","BAR");}},
-                new Fun(){void f(){ m.put("FOO","BAR\u0000");}});
+                   () -> m.put("FOO=","BAR"),
+                   () -> m.put("FOO\u0000","BAR"),
+                   () -> m.put("FOO","BAR\u0000"));
         }
 
         //----------------------------------------------------------------
         // Commands must never be null.
         //----------------------------------------------------------------
         THROWS(NullPointerException.class,
-               new Fun(){void f(){
-                   new ProcessBuilder((List<String>)null);}},
-               new Fun(){void f(){
-                   new ProcessBuilder().command((List<String>)null);}});
+               () -> new ProcessBuilder((List<String>)null),
+               () -> new ProcessBuilder().command((List<String>)null));
 
         //----------------------------------------------------------------
         // Put in a command; get the same one back out.
@@ -1323,25 +1313,18 @@
         // Commands must contain at least one element.
         //----------------------------------------------------------------
         THROWS(IndexOutOfBoundsException.class,
-            new Fun() { void f() throws IOException {
-                new ProcessBuilder().start();}},
-            new Fun() { void f() throws IOException {
-                new ProcessBuilder(new ArrayList<String>()).start();}},
-            new Fun() { void f() throws IOException {
-                Runtime.getRuntime().exec(new String[]{});}});
+               () -> new ProcessBuilder().start(),
+               () -> new ProcessBuilder(new ArrayList<String>()).start(),
+               () -> Runtime.getRuntime().exec(new String[]{}));
 
         //----------------------------------------------------------------
         // Commands must not contain null elements at start() time.
         //----------------------------------------------------------------
         THROWS(NullPointerException.class,
-            new Fun() { void f() throws IOException {
-                new ProcessBuilder("foo",null,"bar").start();}},
-            new Fun() { void f() throws IOException {
-                new ProcessBuilder((String)null).start();}},
-            new Fun() { void f() throws IOException {
-                new ProcessBuilder(new String[]{null}).start();}},
-            new Fun() { void f() throws IOException {
-                new ProcessBuilder(new String[]{"foo",null,"bar"}).start();}});
+               () -> new ProcessBuilder("foo",null,"bar").start(),
+               () -> new ProcessBuilder((String)null).start(),
+               () -> new ProcessBuilder(new String[]{null}).start(),
+               () -> new ProcessBuilder(new String[]{"foo",null,"bar"}).start());
 
         //----------------------------------------------------------------
         // Command lists are growable.
@@ -1358,15 +1341,13 @@
         try {
             final Map<String,String> env = new ProcessBuilder().environment();
             THROWS(NullPointerException.class,
-                new Fun(){void f(){ env.put("foo",null);}},
-                new Fun(){void f(){ env.put(null,"foo");}},
-                new Fun(){void f(){ env.remove(null);}},
-                new Fun(){void f(){
-                    for (Map.Entry<String,String> e : env.entrySet())
-                        e.setValue(null);}},
-                new Fun() { void f() throws IOException {
-                    Runtime.getRuntime().exec(new String[]{"foo"},
-                                              new String[]{null});}});
+                   () -> env.put("foo",null),
+                   () -> env.put(null,"foo"),
+                   () -> env.remove(null),
+                   () -> { for (Map.Entry<String,String> e : env.entrySet())
+                               e.setValue(null);},
+                   () -> Runtime.getRuntime().exec(new String[]{"foo"},
+                                                   new String[]{null}));
         } catch (Throwable t) { unexpected(t); }
 
         //----------------------------------------------------------------
@@ -1375,10 +1356,10 @@
         try {
             final Map<String,String> env = new ProcessBuilder().environment();
             THROWS(ClassCastException.class,
-                new Fun(){void f(){ env.remove(TRUE);}},
-                new Fun(){void f(){ env.keySet().remove(TRUE);}},
-                new Fun(){void f(){ env.values().remove(TRUE);}},
-                new Fun(){void f(){ env.entrySet().remove(TRUE);}});
+                   () -> env.remove(TRUE),
+                   () -> env.keySet().remove(TRUE),
+                   () -> env.values().remove(TRUE),
+                   () -> env.entrySet().remove(TRUE));
         } catch (Throwable t) { unexpected(t); }
 
         //----------------------------------------------------------------
@@ -1394,22 +1375,22 @@
                 // Nulls in environment queries are forbidden.
                 //----------------------------------------------------------------
                 THROWS(NullPointerException.class,
-                    new Fun(){void f(){ getenv(null);}},
-                    new Fun(){void f(){ env.get(null);}},
-                    new Fun(){void f(){ env.containsKey(null);}},
-                    new Fun(){void f(){ env.containsValue(null);}},
-                    new Fun(){void f(){ env.keySet().contains(null);}},
-                    new Fun(){void f(){ env.values().contains(null);}});
+                       () -> getenv(null),
+                       () -> env.get(null),
+                       () -> env.containsKey(null),
+                       () -> env.containsValue(null),
+                       () -> env.keySet().contains(null),
+                       () -> env.values().contains(null));
 
                 //----------------------------------------------------------------
                 // Non-String types in environment queries are forbidden.
                 //----------------------------------------------------------------
                 THROWS(ClassCastException.class,
-                    new Fun(){void f(){ env.get(TRUE);}},
-                    new Fun(){void f(){ env.containsKey(TRUE);}},
-                    new Fun(){void f(){ env.containsValue(TRUE);}},
-                    new Fun(){void f(){ env.keySet().contains(TRUE);}},
-                    new Fun(){void f(){ env.values().contains(TRUE);}});
+                       () -> env.get(TRUE),
+                       () -> env.containsKey(TRUE),
+                       () -> env.containsValue(TRUE),
+                       () -> env.keySet().contains(TRUE),
+                       () -> env.values().contains(TRUE));
 
                 //----------------------------------------------------------------
                 // Illegal String values in environment queries are (grumble) OK
@@ -1427,12 +1408,11 @@
             final Set<Map.Entry<String,String>> entrySet =
                 new ProcessBuilder().environment().entrySet();
             THROWS(NullPointerException.class,
-                   new Fun(){void f(){ entrySet.contains(null);}});
+                   () -> entrySet.contains(null));
             THROWS(ClassCastException.class,
-                new Fun(){void f(){ entrySet.contains(TRUE);}},
-                new Fun(){void f(){
-                    entrySet.contains(
-                        new SimpleImmutableEntry<Boolean,String>(TRUE,""));}});
+                   () -> entrySet.contains(TRUE),
+                   () -> entrySet.contains(
+                             new SimpleImmutableEntry<Boolean,String>(TRUE,"")));
 
             check(! entrySet.contains
                   (new SimpleImmutableEntry<String,String>("", "")));
@@ -1902,8 +1882,7 @@
                 final ProcessBuilder pb =
                     new ProcessBuilder(new String[]{"unliKely"});
                 pb.environment().put("PATH", "suBdiR");
-                THROWS(IOException.class,
-                       new Fun() {void f() throws Throwable {pb.start();}});
+                THROWS(IOException.class, () -> pb.start());
             } catch (Throwable t) { unexpected(t);
             } finally {
                 new File("suBdiR/unliKely").delete();
@@ -1976,10 +1955,8 @@
             equal(SIZE, p.getInputStream().available());
             equal(SIZE, p.getErrorStream().available());
             THROWS(IOException.class,
-                   new Fun(){void f() throws IOException {
-                       p.getOutputStream().write((byte) '!');
-                       p.getOutputStream().flush();
-                       }});
+                   () -> { p.getOutputStream().write((byte) '!');
+                           p.getOutputStream().flush();});
 
             final byte[] bytes = new byte[SIZE + 1];
             equal(SIZE, p.getInputStream().read(bytes));
@@ -2006,12 +1983,9 @@
             InputStream[] streams = { p.getInputStream(), p.getErrorStream() };
             for (final InputStream in : streams) {
                 Fun[] ops = {
-                    new Fun(){void f() throws IOException {
-                        in.read(); }},
-                    new Fun(){void f() throws IOException {
-                        in.read(bytes); }},
-                    new Fun(){void f() throws IOException {
-                        in.available(); }}
+                    () -> in.read(),
+                    () -> in.read(bytes),
+                    () -> in.available()
                 };
                 for (Fun op : ops) {
                     try {
@@ -2215,21 +2189,17 @@
         } catch (Throwable t) { unexpected(t); }
 
         THROWS(SecurityException.class,
-            new Fun() { void f() throws IOException {
-                policy.setPermissions(/* Nothing */);
-                System.getenv("foo");}},
-            new Fun() { void f() throws IOException {
-                policy.setPermissions(/* Nothing */);
-                System.getenv();}},
-            new Fun() { void f() throws IOException {
-                policy.setPermissions(/* Nothing */);
-                new ProcessBuilder("echo").start();}},
-            new Fun() { void f() throws IOException {
-                policy.setPermissions(/* Nothing */);
-                Runtime.getRuntime().exec("echo");}},
-            new Fun() { void f() throws IOException {
-                policy.setPermissions(new RuntimePermission("getenv.bar"));
-                System.getenv("foo");}});
+               () -> { policy.setPermissions(/* Nothing */);
+                       System.getenv("foo");},
+               () -> { policy.setPermissions(/* Nothing */);
+                       System.getenv();},
+               () -> { policy.setPermissions(/* Nothing */);
+                       new ProcessBuilder("echo").start();},
+               () -> { policy.setPermissions(/* Nothing */);
+                       Runtime.getRuntime().exec("echo");},
+               () -> { policy.setPermissions(
+                               new RuntimePermission("getenv.bar"));
+                       System.getenv("foo");});
 
         try {
             policy.setPermissions(new RuntimePermission("getenv.foo"));
@@ -2246,18 +2216,16 @@
             = new FilePermission("<<ALL FILES>>", "execute");
 
         THROWS(SecurityException.class,
-            new Fun() { void f() throws IOException {
-                // environment permission by itself insufficient
-                policy.setPermissions(new RuntimePermission("getenv.*"));
-                ProcessBuilder pb = new ProcessBuilder("env");
-                pb.environment().put("foo","bar");
-                pb.start();}},
-            new Fun() { void f() throws IOException {
-                 // exec permission by itself insufficient
-                 policy.setPermissions(execPermission);
-                 ProcessBuilder pb = new ProcessBuilder("env");
-                 pb.environment().put("foo","bar");
-                 pb.start();}});
+               () -> { // environment permission by itself insufficient
+                       policy.setPermissions(new RuntimePermission("getenv.*"));
+                       ProcessBuilder pb = new ProcessBuilder("env");
+                       pb.environment().put("foo","bar");
+                       pb.start();},
+               () -> { // exec permission by itself insufficient
+                       policy.setPermissions(execPermission);
+                       ProcessBuilder pb = new ProcessBuilder("env");
+                       pb.environment().put("foo","bar");
+                       pb.start();});
 
         try {
             // Both permissions? OK.
@@ -2585,7 +2553,7 @@
         try {realMain(args);} catch (Throwable t) {unexpected(t);}
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new AssertionError("Some tests failed");}
-    private static abstract class Fun {abstract void f() throws Throwable;}
+    interface Fun {void f() throws Throwable;}
     static void THROWS(Class<? extends Throwable> k, Fun... fs) {
         for (Fun f : fs)
             try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/test/java/lang/annotation/typeAnnotations/TestExecutableGetAnnotatedType.java	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,277 @@
+/*
+ * Copyright (c) 2014, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/*
+ * @test
+ * @bug 8039916
+ * @summary Test that a call to getType() on an AnnotatedType returned from an
+ *          Executable.getAnnotated* returns the same type as the corresponding
+ *          Executable.getGeneric* call.
+ * @run testng TestExecutableGetAnnotatedType
+ */
+
+import org.testng.annotations.DataProvider;
+import org.testng.annotations.Test;
+
+import java.lang.annotation.*;
+import java.lang.reflect.*;
+import java.util.Arrays;
+import java.util.List;
+import java.util.stream.Collectors;
+import java.util.stream.Stream;
+
+import static org.testng.Assert.*;
+
+public class TestExecutableGetAnnotatedType {
+    @Test(dataProvider = "genericExecutableData")
+    public void testGenericMethodExceptions(Executable e) throws Exception {
+        testExceptions(e);
+    }
+
+    @Test(dataProvider = "executableData")
+    public void testMethodExceptions(Executable e) throws Exception {
+        testExceptions(e);
+    }
+
+    @Test(dataProvider = "genericExecutableData")
+    public void testGenericMethodParameterTypes(Executable e) throws Exception {
+        testMethodParameters(e);
+    }
+
+    @Test(dataProvider = "executableData")
+    public void testMethodParameterTypes(Executable e) throws Exception {
+        testMethodParameters(e);
+    }
+
+    @Test(dataProvider = "genericExecutableData")
+    public void testGenericParameterTypes(Executable e) throws Exception {
+        testParameters(e.getParameters());
+    }
+
+    @Test(dataProvider = "executableData")
+    public void testParameterTypes(Executable e) throws Exception {
+        testParameters(e.getParameters());
+    }
+
+    // should test constructors as well, see JDK-8044629
+    @Test(dataProvider = "genericMethodData")
+    public void testGenericReceiverType(Executable e) throws Exception {
+        testReceiverType0(e);
+    }
+
+    // should test constructors as well, see JDK-8044629
+    @Test(dataProvider = "methodData")
+    public void testReceiverType(Executable e) throws Exception {
+        testReceiverType0(e);
+    }
+
+    @Test(dataProvider = "genericMethodData")
+    public void testGenericMethodReturnType(Object o) throws Exception {
+        // testng gets confused if the param to this method has type Method
+        Method m = (Method)o;
+        testReturnType(m);
+    }
+
+    @Test(dataProvider = "methodData")
+    public void testMethodReturnType(Object o) throws Exception {
+        // testng gets confused if the param to this method has type Method
+        Method m = (Method)o;
+        testReturnType(m);
+    }
+
+    private void testExceptions(Executable e) {
+        Type[] ts = e.getGenericExceptionTypes();
+        AnnotatedType[] ats = e.getAnnotatedExceptionTypes();
+        assertEquals(ts.length, ats.length);
+
+        for (int i = 0; i < ts.length; i++) {
+            Type t = ts[i];
+            AnnotatedType at = ats[i];
+            assertSame(at.getType(), t, e.toString() + ": T: " + t + ", AT: " + at + ", AT.getType(): " + at.getType() + "\n");
+        }
+    }
+
+    private void testMethodParameters(Executable e) {
+        Type[] ts = e.getGenericParameterTypes();
+        AnnotatedType[] ats = e.getAnnotatedParameterTypes();
+        assertEquals(ts.length, ats.length);
+
+        for (int i = 0; i < ts.length; i++) {
+            Type t = ts[i];
+            AnnotatedType at = ats[i];
+            assertSame(at.getType(), t, e.toString() + ": T: " + t + ", AT: " + at + ", AT.getType(): " + at.getType() + "\n");
+        }
+    }
+
+    private void testParameters(Parameter[] params) {
+        for (Parameter p : params) {
+            Type t = p.getParameterizedType();
+            AnnotatedType at = p.getAnnotatedType();
+            assertSame(at.getType(), t, p.toString() + ": T: " + t + ", AT: " + at + ", AT.getType(): " + at.getType() + "\n");
+        }
+    }
+
+    private void testReceiverType0(Executable e) {
+        if (Modifier.isStatic(e.getModifiers()))
+            assertNull(e.getAnnotatedReceiverType());
+        else
+            assertSame(e.getAnnotatedReceiverType().getType(), e.getDeclaringClass());
+    }
+
+    private void testReturnType(Method m) {
+        Type t = m.getGenericReturnType();
+        AnnotatedType at = m.getAnnotatedReturnType();
+        assertSame(at.getType(), t, m.toString() + ": T: " + t + ", AT: " + at + ", AT.getType(): " + at.getType() + "\n");
+    }
+
+    @DataProvider
+    public Object[][] methodData() throws Exception {
+        return filterData(Arrays.stream(Methods1.class.getMethods()), Methods1.class)
+            .toArray(new Object[0][0]);
+    }
+
+    @DataProvider
+    public Object[][] genericMethodData()  throws Exception {
+        return filterData(Arrays.stream(GenericMethods1.class.getMethods()), GenericMethods1.class)
+            .toArray(new Object[0][0]);
+    }
+
+    @DataProvider
+    public Object[][] executableData() throws Exception {
+    @SuppressWarnings("raw")
+        List l = filterData(Arrays.stream(Methods1.class.getMethods()), Methods1.class);
+        l.addAll(filterData(Arrays.stream(Methods1.class.getConstructors()), Methods1.class));
+        l.addAll(filterData(Arrays.stream(Ctors1.class.getConstructors()), Ctors1.class));
+        return ((List<Object[][]>)l).toArray(new Object[0][0]);
+    }
+
+    @DataProvider
+    public Object[][] genericExecutableData() throws Exception {
+    @SuppressWarnings("raw")
+        List l = filterData(Arrays.stream(GenericMethods1.class.getMethods()), GenericMethods1.class);
+        l.addAll(filterData(Arrays.stream(GenericMethods1.class.getConstructors()), GenericMethods1.class));
+        l.addAll(filterData(Arrays.stream(GenericCtors1.class.getConstructors()), GenericCtors1.class));
+        return ((List<Object[][]>)l).toArray(new Object[0][0]);
+    }
+
+    private List<?> filterData(Stream<? extends Executable> l, Class<?> c) {
+        return l.filter(m -> (m.getDeclaringClass() == c)) // remove object methods
+            .map(m -> { Object[] o = new Object[1]; o[0] = m; return o; })
+            .collect(Collectors.toList());
+    }
+
+    @Retention(RetentionPolicy.RUNTIME)
+    @Target(ElementType.TYPE_USE)
+    public @interface TA {}
+
+    @Retention(RetentionPolicy.RUNTIME)
+    @Target(ElementType.TYPE_USE)
+    public @interface TB {}
+
+    @Retention(RetentionPolicy.RUNTIME)
+    @Target(ElementType.TYPE_USE)
+    public @interface TC {}
+
+    public static class Methods1 {
+        public static void m1() throws Error, RuntimeException {;}
+        public static long m2(int a, double b) throws Error, RuntimeException { return 0L; }
+        public static Object m3(String s, List l) throws Error, RuntimeException { return null; }
+        public static Object m4(String s, List<String> l) { return null; }
+        public static Object m4(String s, List<String> l, boolean ... b){ return null; }
+
+        public static void m10() throws @TA Error, @TB @TC RuntimeException {;}
+        public static @TB long m20(@TC int a, @TA double b) throws @TA Error, @TB @TC RuntimeException { return 0L; }
+        public static @TC Object m30(@TA String s, @TB List l) throws @TA Error, @TB @TC RuntimeException { return null; }
+        public static @TA Object m40(@TB String s, @TC List<@TA String> l) { return null; }
+        public static @TA Object m40(@TB String s, @TC List<@TA String> l, @TB boolean ... b) { return null; }
+
+        public Methods1(int a, double b) {}
+        public Methods1(String s, List<String> l, boolean ... b) {}
+        public Methods1(@TC long a, @TA float b) {}
+        public Methods1(@TA int i, @TB String s, @TC List<@TA String> l, @TB boolean ... b) {}
+    }
+
+    // test default ctor
+    public static class Ctors1 {
+    }
+
+    public static class GenericMethods1<E> {
+        public E m1(E e, Object o) throws Error, RuntimeException { return null; }
+        public E m2(List<? extends List> e, int i) throws Error, RuntimeException { return null; }
+        public E m3(double d, List<E> e) throws Error, RuntimeException { return null; }
+        public <E extends List> E m4(byte[] b, GenericMethods1<? extends E> e) { return null; }
+        public <E extends List> E m5(GenericMethods1<? super Number> e) { return null; }
+        public <E extends List & Cloneable> E m6(char c, E e) { return null; }
+        public <E extends List & Cloneable> E m7(char c, E e, byte ... b) { return null; }
+
+        public static <M> M n1(M e) { return null; }
+        public static <M> M n2(List<? extends List> e) { return null; }
+        public static <M extends RuntimeException> M n3(List<M> e) throws Error, M { return null; }
+        public static <M extends Number> M n4(GenericMethods1<? extends M> e) throws Error, RuntimeException { return null; }
+        public static <M extends Object> M n5(GenericMethods1<? super Number> e) { return null; }
+        public static <M extends List & Cloneable> M n6(M e) { return null; }
+
+        public <M> E o1(E e) { return null; }
+        public <M> E o2(List<? extends List> e) { return null; }
+        public <M extends Error, N extends RuntimeException> E o3(GenericMethods1<E> this, List<E> e) throws M, N { return null; }
+        public <M extends Number> E o4(GenericMethods1<? extends E> e) throws Error, RuntimeException { return null; }
+        public <M extends Object> E o5(GenericMethods1<? super Number> e) { return null; }
+        public <M extends List & Cloneable> E o6(E e) { return null; }
+
+
+        // with annotations
+        public @TA E m10(E e, @TC Object o) throws @TA Error, @TB @TC RuntimeException { return null; }
+        public @TB E m20(@TA List<@TA ? extends @TA List> e, @TC int i) throws @TA Error, @TB @TC RuntimeException { return null; }
+        public @TB E m30(@TC double d, List<E> e) throws @TA Error, @TB @TC RuntimeException { return null; }
+        public <@TA E extends @TA List> @TA E m40(@TA byte @TB [] b, GenericMethods1<@TA ? extends E> e) { return null; }
+        public <@TB E extends @TB List> E m50(@TA GenericMethods1<? super Number> e) { return null; }
+        public <@TB E extends @TA List & Cloneable> E m60(@TC char c, E e) { return null; }
+        public <@TB E extends @TA List & Cloneable> E m70(@TC char c, E e, @TA @TB byte ... b) { return null; }
+
+        public static <@TA M> @TA M n10(M e) { return null; }
+        public static <@TA @TB @TC M> M n20(List<@TA ? extends List> e) { return null; }
+        @TA @TB @TC public static <M extends RuntimeException> M n30(List<@TB M> e) throws @TA Error, @TB @TC M { return null; }
+        public static <@TC M extends Number> M n40(GenericMethods1<? extends @TA M> e) throws @TA Error, @TB @TC RuntimeException { return null; }
+        @TA public static <M extends @TB Object> M n50(GenericMethods1<? super Number> e) { return null; }
+        public static <@TA M extends @TB List & @TC @TB Cloneable> M n60(M e) { return null; }
+
+        public <@TC M> E o10(@TA E e) { return null; }
+        public <M> @TA E o20(@TB List<@TB ? extends @TB List> e) { return null; }
+        @TC public <M extends Error, N extends RuntimeException> @TB E o30(@TA @TB @TC GenericMethods1<E> this, List<E> e) throws @TA M, @TB @TC N { return null; }
+        public <@TA M extends Number> E o40(GenericMethods1<? extends @TA E> e) throws @TA Error, @TB @TC RuntimeException { return null; }
+        public <M extends @TA Object> E o50(GenericMethods1<@TA ? super Number> e) { return null; }
+        public <@TA M extends @TB List & @TC Cloneable> E o60(@TA E e) { return null; }
+
+
+        // ctors
+        public GenericMethods1(List<? extends List> e, int i) throws Error, RuntimeException { }
+        public <E extends List & Cloneable> GenericMethods1(char c, E e, byte ... b) { }
+        @TC public <M extends Error, N extends RuntimeException> GenericMethods1(List<@TC E> e) throws @TA M, @TB @TC N { }
+        public <@TA M extends @TB List & @TC Cloneable> GenericMethods1(@TA E e, @TB M m) throws @TA Exception { }
+        public <@TA M extends @TB List & @TC Cloneable> GenericMethods1(@TA E e, @TB M m, @TC byte ... b) throws Exception { }
+    }
+
+    // test default ctor
+    public static class GenericCtors1<T> {
+    }
+}
--- a/jdk/test/java/nio/charset/StandardCharsets/Standard.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/nio/charset/StandardCharsets/Standard.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2011, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -99,13 +99,6 @@
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new Exception("Some tests failed");
     }
-    private static abstract class Fun {abstract void f() throws Throwable;}
-    private static void THROWS(Class<? extends Throwable> k, Fun... fs) {
-          for (Fun f : fs)
-              try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
-              catch (Throwable t) {
-                  if (k.isAssignableFrom(t.getClass())) pass();
-                  else unexpected(t);}}
     static byte[] serializedForm(Object obj) {
         try {
             ByteArrayOutputStream baos = new ByteArrayOutputStream();
--- a/jdk/test/java/util/Collection/BiggernYours.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/util/Collection/BiggernYours.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006, 2012, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2006, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -236,13 +236,6 @@
         try {realMain(args);} catch (Throwable t) {unexpected(t);}
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new AssertionError("Some tests failed");}
-    private static abstract class Fun {abstract void f() throws Throwable;}
-    static void THROWS(Class<? extends Throwable> k, Fun... fs) {
-        for (Fun f : fs)
-            try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
-            catch (Throwable t) {
-                if (k.isAssignableFrom(t.getClass())) pass();
-                else unexpected(t);}}
     private static abstract class CheckedThread extends Thread {
         abstract void realRun() throws Throwable;
         public void run() {
--- a/jdk/test/java/util/Collection/IteratorAtEnd.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/util/Collection/IteratorAtEnd.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2007, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -84,9 +84,9 @@
         try {
             final Iterator it = c.iterator();
             THROWS(NoSuchElementException.class,
-                   new Fun() {void f() { while (true) it.next(); }});
+                   () -> { while (true) it.next(); });
             try { it.remove(); }
-            catch (UnsupportedOperationException _) { return; }
+            catch (UnsupportedOperationException exc) { return; }
             pass();
         } catch (Throwable t) { unexpected(t); }
 
@@ -96,10 +96,9 @@
                 final ListIterator it = list.listIterator(0);
                 it.next();
                 final Object x = it.previous();
-                THROWS(NoSuchElementException.class,
-                       new Fun() {void f() { it.previous(); }});
+                THROWS(NoSuchElementException.class, () -> it.previous());
                 try { it.remove(); }
-                catch (UnsupportedOperationException _) { return; }
+                catch (UnsupportedOperationException exc) { return; }
                 pass();
                 check(! list.get(0).equals(x));
             } catch (Throwable t) { unexpected(t); }
@@ -108,10 +107,9 @@
                 final ListIterator it = list.listIterator(list.size());
                 it.previous();
                 final Object x = it.next();
-                THROWS(NoSuchElementException.class,
-                       new Fun() {void f() { it.next(); }});
+                THROWS(NoSuchElementException.class, () -> it.next());
                 try { it.remove(); }
-                catch (UnsupportedOperationException _) { return; }
+                catch (UnsupportedOperationException exc) { return; }
                 pass();
                 check(! list.get(list.size()-1).equals(x));
             } catch (Throwable t) { unexpected(t); }
@@ -132,7 +130,7 @@
         try {realMain(args);} catch (Throwable t) {unexpected(t);}
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new AssertionError("Some tests failed");}
-    private static abstract class Fun {abstract void f() throws Throwable;}
+    interface Fun {void f() throws Throwable;}
     static void THROWS(Class<? extends Throwable> k, Fun... fs) {
         for (Fun f : fs)
             try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
--- a/jdk/test/java/util/Collection/MOAT.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/util/Collection/MOAT.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2005, 2013, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2005, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -117,10 +117,8 @@
         final List<Integer> emptyArray = Arrays.asList(new Integer[]{});
         testCollection(emptyArray);
         testEmptyList(emptyArray);
-        THROWS(IndexOutOfBoundsException.class,
-               new Fun(){void f(){ emptyArray.set(0,1); }});
-        THROWS(UnsupportedOperationException.class,
-               new Fun(){void f(){ emptyArray.add(0,1); }});
+        THROWS(IndexOutOfBoundsException.class, () -> emptyArray.set(0,1));
+        THROWS(UnsupportedOperationException.class, () -> emptyArray.add(0,1));
 
         List<Integer> noOne = nCopies(0,1);
         testCollection(noOne);
@@ -204,8 +202,7 @@
         if (rnd.nextBoolean())
             check(! it.hasNext());
 
-        THROWS(NoSuchElementException.class,
-               new Fun(){void f(){ it.next(); }});
+        THROWS(NoSuchElementException.class, () -> it.next());
 
         try { it.remove(); }
         catch (IllegalStateException ignored) { pass(); }
@@ -232,16 +229,15 @@
 
     private static void testImmutableCollection(final Collection<Integer> c) {
         THROWS(UnsupportedOperationException.class,
-               new Fun(){void f(){ c.add(99); }},
-               new Fun(){void f(){ c.addAll(singleton(99)); }});
+               () -> c.add(99),
+               () -> c.addAll(singleton(99)));
         if (! c.isEmpty()) {
             final Integer first = c.iterator().next();
             THROWS(UnsupportedOperationException.class,
-                   new Fun(){void f(){ c.clear(); }},
-                   new Fun(){void f(){ c.remove(first); }},
-                   new Fun(){void f(){ c.removeAll(singleton(first)); }},
-                   new Fun(){void f(){ c.retainAll(emptyList()); }}
-                   );
+                   () -> c.clear(),
+                   () -> c.remove(first),
+                   () -> c.removeAll(singleton(first)),
+                   () -> c.retainAll(emptyList()));
         }
     }
 
@@ -253,17 +249,17 @@
         testList(c);
         testImmutableCollection(c);
         THROWS(UnsupportedOperationException.class,
-               new Fun(){void f(){ c.set(0,42); }},
-               new Fun(){void f(){ c.add(0,42); }},
-               new Fun(){void f(){ c.addAll(0,singleton(86)); }});
+               () -> c.set(0,42),
+               () -> c.add(0,42),
+               () -> c.addAll(0,singleton(86)));
         if (! c.isEmpty())
             THROWS(UnsupportedOperationException.class,
-                   new Fun(){void f(){
-                           Iterator<Integer> it = c.iterator();
-                           it.next(); it.remove();}},
-                   new Fun(){void f(){
-                           ListIterator<Integer> it = c.listIterator();
-                           it.next(); it.remove();}});
+                   () -> { Iterator<Integer> it = c.iterator();
+                           it.next();
+                           it.remove(); },
+                   () -> { ListIterator<Integer> it = c.listIterator();
+                           it.next();
+                           it.remove(); });
     }
 
     private static void clear(Collection<Integer> c) {
@@ -290,19 +286,19 @@
 
     private static void testImmutableMap(final Map<Integer,Integer> m) {
         THROWS(UnsupportedOperationException.class,
-               new Fun(){void f(){ m.put(1,1); }},
-               new Fun(){void f(){ m.putAll(singletonMap(1,1)); }});
+               () -> m.put(1,1),
+               () -> m.putAll(singletonMap(1,1)));
         if (! m.isEmpty()) {
             final Integer first = m.keySet().iterator().next();
             THROWS(UnsupportedOperationException.class,
-                   new Fun(){void f(){ m.remove(first); }},
-                   new Fun(){void f(){ m.clear(); }});
+                   () -> m.remove(first),
+                   () -> m.clear());
             final Map.Entry<Integer,Integer> me
                 = m.entrySet().iterator().next();
             Integer key = me.getKey();
             Integer val = me.getValue();
             THROWS(UnsupportedOperationException.class,
-                   new Fun(){void f(){ me.setValue(3); }});
+                   () -> me.setValue(3));
             equal(key, me.getKey());
             equal(val, me.getValue());
         }
@@ -492,9 +488,9 @@
             // insert, query, remove element at head
             if (isEmpty) {
                 THROWS(NoSuchElementException.class,
-                       new Fun(){void f(){ deq.getFirst(); }},
-                       new Fun(){void f(){ deq.element(); }},
-                       new Fun(){void f(){ deq.iterator().next(); }});
+                       () -> deq.getFirst(),
+                       () -> deq.element(),
+                       () -> deq.iterator().next());
                 check(deq.peekFirst() == null);
                 check(deq.peek() == null);
             } else {
@@ -546,9 +542,9 @@
             }
             if (isEmpty) {
                 THROWS(NoSuchElementException.class,
-                       new Fun(){void f(){ deq.getFirst(); }},
-                       new Fun(){void f(){ deq.element(); }},
-                       new Fun(){void f(){ deq.iterator().next(); }});
+                       () -> deq.getFirst(),
+                       () -> deq.element(),
+                       () -> deq.iterator().next());
                 check(deq.peekFirst() == null);
                 check(deq.peek() == null);
             } else {
@@ -571,8 +567,7 @@
             // insert, query, remove element at tail
             if (isEmpty) {
                 check(deq.peekLast() == null);
-                THROWS(NoSuchElementException.class,
-                       new Fun(){void f(){ deq.getLast(); }});
+                THROWS(NoSuchElementException.class, () -> deq.getLast());
             } else {
                 check(deq.peekLast() != e);
                 check(deq.getLast() != e);
@@ -615,8 +610,7 @@
             }
             if (isEmpty) {
                 check(deq.peekLast() == null);
-                THROWS(NoSuchElementException.class,
-                       new Fun(){void f(){ deq.getLast(); }});
+                THROWS(NoSuchElementException.class, () -> deq.getLast());
             } else {
                 check(deq.peekLast() != e);
                 check(deq.getLast() != e);
@@ -649,17 +643,17 @@
             if (isList) {
                 check(!asList.listIterator().hasPrevious());
                 THROWS(NoSuchElementException.class,
-                       new Fun(){void f(){ asList.listIterator().previous(); }});
+                       () -> asList.listIterator().previous());
             }
             THROWS(NoSuchElementException.class,
-                   new Fun(){void f(){ deq.iterator().next(); }},
-                   new Fun(){void f(){ deq.element(); }},
-                   new Fun(){void f(){ deq.getFirst(); }},
-                   new Fun(){void f(){ deq.getLast(); }},
-                   new Fun(){void f(){ deq.pop(); }},
-                   new Fun(){void f(){ deq.remove(); }},
-                   new Fun(){void f(){ deq.removeFirst(); }},
-                   new Fun(){void f(){ deq.removeLast(); }});
+                   () -> deq.iterator().next(),
+                   () -> deq.element(),
+                   () -> deq.getFirst(),
+                   () -> deq.getLast(),
+                   () -> deq.pop(),
+                   () -> deq.remove(),
+                   () -> deq.removeFirst(),
+                   () -> deq.removeLast());
 
             check(deq.poll() == null);
             check(deq.pollFirst() == null);
@@ -728,8 +722,8 @@
         l.listIterator(0);
         l.listIterator(l.size());
         THROWS(IndexOutOfBoundsException.class,
-               new Fun(){void f(){l.listIterator(-1);}},
-               new Fun(){void f(){l.listIterator(l.size() + 1);}});
+               () -> l.listIterator(-1),
+               () -> l.listIterator(l.size() + 1));
 
         if (l instanceof AbstractList) {
             try {
@@ -1004,22 +998,22 @@
             ? (ConcurrentMap<T,Integer>) m
             : null;
         List<Fun> fs = new ArrayList<Fun>();
-        fs.add(new Fun(){void f(){ check(! m.containsKey(null));}});
-        fs.add(new Fun(){void f(){ equal(m.remove(null), null);}});
-        fs.add(new Fun(){void f(){ equal(m.get(null), null);}});
-        if (cm != null) {
-            fs.add(new Fun(){void f(){ check(! cm.remove(null,null));}});}
+        fs.add(() -> check(! m.containsKey(null)));
+        fs.add(() -> equal(m.remove(null), null));
+        fs.add(() -> equal(m.get(null), null));
+        if (cm != null)
+            fs.add(() -> check(! cm.remove(null,null)));
         throwsConsistently(NullPointerException.class, fs);
 
         fs.clear();
         final Map<T,Integer> sm = singletonMap(null,1);
-        fs.add(new Fun(){void f(){ equal(m.put(null,1), null); m.clear();}});
-        fs.add(new Fun(){void f(){ m.putAll(sm); m.clear();}});
+        fs.add(() -> { equal(m.put(null,1), null); m.clear();});
+        fs.add(() -> { m.putAll(sm); m.clear();});
         if (cm != null) {
-            fs.add(new Fun(){void f(){ check(! cm.remove(null,null));}});
-            fs.add(new Fun(){void f(){ equal(cm.putIfAbsent(null,1), 1);}});
-            fs.add(new Fun(){void f(){ equal(cm.replace(null,1), null);}});
-            fs.add(new Fun(){void f(){ equal(cm.replace(null,1, 1), 1);}});
+            fs.add(() -> check(! cm.remove(null,null)));
+            fs.add(() -> equal(cm.putIfAbsent(null,1), 1));
+            fs.add(() -> equal(cm.replace(null,1), null));
+            fs.add(() -> equal(cm.replace(null,1, 1), 1));
         }
         throwsConsistently(NullPointerException.class, fs);
     }
@@ -1180,8 +1174,7 @@
             equalNext(it, 3);
             equalNext(it, 1);
             check(! it.hasNext());
-            THROWS(NoSuchElementException.class,
-                   new Fun(){void f(){it.next();}});
+            THROWS(NoSuchElementException.class, () -> it.next());
         }
 
         {
@@ -1191,8 +1184,7 @@
             check(it.hasNext()); equal(it.next().getKey(), 3);
             check(it.hasNext()); equal(it.next().getKey(), 1);
             check(! it.hasNext());
-            THROWS(NoSuchElementException.class,
-                   new Fun(){void f(){it.next();}});
+            THROWS(NoSuchElementException.class, () -> it.next());
         }
 
         prepMapForDescItrTests(m);
@@ -1262,8 +1254,7 @@
             equalNext(it, 3);
             equalNext(it, 1);
             check(! it.hasNext());
-            THROWS(NoSuchElementException.class,
-                   new Fun(){void f(){it.next();}});
+            THROWS(NoSuchElementException.class, () -> it.next());
         }
 
         prepSetForDescItrTests(s);
@@ -1365,7 +1356,7 @@
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new Exception("Some tests failed");
     }
-    private static abstract class Fun {abstract void f() throws Throwable;}
+    interface Fun {void f() throws Throwable;}
     private static void THROWS(Class<? extends Throwable> k, Fun... fs) {
           for (Fun f : fs)
               try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
--- a/jdk/test/java/util/Collections/AsLifoQueue.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/util/Collections/AsLifoQueue.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2005, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2005, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -56,8 +56,7 @@
             equal(q.size(), 3);
             check(! q.offer("d"));
             equal(q.size(), 3);
-            THROWS(IllegalStateException.class,
-                   new Fun(){void f(){ q.add("d"); }});
+            THROWS(IllegalStateException.class, () -> q.add("d"));
             equal(q.size(), 3);
             equal(q.toString(), "[c, b, a]");
             equal(q.peek(), "c");
@@ -66,8 +65,7 @@
             equal(q.poll(), "b");
             equal(q.peek(), "a");
             equal(q.remove(), "a");
-            THROWS(NoSuchElementException.class,
-                   new Fun(){void f(){ q.remove(); }});
+            THROWS(NoSuchElementException.class, () -> q.remove());
             equal(q.poll(), null);
             check(q.isEmpty());
             equal(q.size(), 0);
@@ -88,7 +86,7 @@
         try {realMain(args);} catch (Throwable t) {unexpected(t);}
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new AssertionError("Some tests failed");}
-    static abstract class Fun { abstract void f() throws Throwable; }
+    interface Fun {void f() throws Throwable;}
     private static void THROWS(Class<? extends Throwable> k, Fun... fs) {
         for (Fun f : fs)
             try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
--- a/jdk/test/java/util/NavigableMap/LockStep.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/util/NavigableMap/LockStep.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006, 2013, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2006, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -236,8 +236,8 @@
         Comparator cmp = comparator(s);
         if (s.isEmpty()) {
             THROWS(NoSuchElementException.class,
-                   new Fun(){void f(){ s.first(); }},
-                   new Fun(){void f(){ s.last();  }});
+                   () -> s.first(),
+                   () -> s.last());
             equal(null, s.lower(1));
             equal(null, s.floor(1));
             equal(null, s.ceiling(1));
@@ -265,8 +265,7 @@
         };
         for (final Iterator it : its)
             if (maybe(4))
-                THROWS(IllegalStateException.class,
-                       new Fun(){void f(){ it.remove(); }});
+                THROWS(IllegalStateException.class, () -> it.remove());
         Object prev = null;
         for (Object e : s) {
             check(s.contains(e));
@@ -284,7 +283,7 @@
         for (final Iterator it : its) {
             if (maybe(2))
                 check(! it.hasNext());
-            Fun fun = new Fun(){void f(){ it.next(); }};
+            Fun fun = () -> it.next();
             THROWS(NoSuchElementException.class, fun, fun, fun);
         }
     }
@@ -380,8 +379,8 @@
         Comparator cmp = comparator(m);
         if (m.isEmpty()) {
             THROWS(NoSuchElementException.class,
-                   new Fun(){void f(){ m.firstKey(); }},
-                   new Fun(){void f(){ m.lastKey();  }});
+                   () -> m.firstKey(),
+                   () -> m.lastKey());
             equal(null, m.firstEntry());
             equal(null, m.lastEntry());
             equal(null, m.pollFirstEntry());
@@ -430,8 +429,7 @@
         Iterator[] its = concat(kits, vits, eits);
         for (final Iterator it : its)
             if (maybe(4))
-                THROWS(IllegalStateException.class,
-                       new Fun(){void f(){ it.remove(); }});
+                THROWS(IllegalStateException.class, () -> it.remove());
         Map.Entry prev = null;
         for (Map.Entry e : (Set<Map.Entry>) m.entrySet()) {
             Object k = e.getKey();
@@ -459,7 +457,7 @@
         for (final Iterator it : its) {
             if (maybe(2))
                 check(! it.hasNext());
-            Fun fun = new Fun(){void f(){ it.next(); }};
+            Fun fun = () -> it.next();
             THROWS(NoSuchElementException.class, fun, fun, fun);
         }
     }
@@ -633,7 +631,7 @@
     }
 
     static Fun remover(final Iterator it) {
-        return new Fun(){void f(){ it.remove(); }};
+        return () -> it.remove();
     }
 
     static MapFrobber randomRemover(NavigableMap m) {
@@ -663,7 +661,7 @@
                         it.remove();
                         if (maybe(2))
                             THROWS(IllegalStateException.class,
-                                   new Fun(){void f(){ it.remove(); }});
+                                   () -> it.remove());
                     }
                 checkUnusedKey(m, k);}},
             new MapFrobber() {void frob(NavigableMap m) {
@@ -673,7 +671,7 @@
                         it.remove();
                         if (maybe(2))
                             THROWS(IllegalStateException.class,
-                                   new Fun(){void f(){ it.remove(); }});
+                                   () -> it.remove());
                     }
                 checkUnusedKey(m, k);}},
             new MapFrobber() {void frob(NavigableMap m) {
@@ -718,7 +716,7 @@
                         it.remove();
                         if (maybe(2))
                             THROWS(IllegalStateException.class,
-                                   new Fun(){void f(){ it.remove(); }});
+                                   () -> it.remove());
                     }
                 checkUnusedElt(s, e);}},
             new SetFrobber() {void frob(NavigableSet s) {
@@ -728,7 +726,7 @@
                         it.remove();
                         if (maybe(2))
                             THROWS(IllegalStateException.class,
-                                   new Fun(){void f(){ it.remove(); }});
+                                   () -> it.remove());
                     }
                 checkUnusedElt(s, e);}},
             new SetFrobber() {void frob(NavigableSet s) {
@@ -738,7 +736,7 @@
                         it.remove();
                         if (maybe(2))
                             THROWS(IllegalStateException.class,
-                                   new Fun(){void f(){ it.remove(); }});
+                                   () -> it.remove());
                     }
                 checkUnusedElt(s, e);}}
         };
@@ -769,12 +767,12 @@
         for (final NavigableMap m : maps) {
             final Object e = usedKey(m);
             THROWS(IllegalArgumentException.class,
-                   new Fun(){void f(){m.subMap(e,true,e,false)
-                                       .subMap(e,true,e,true);}},
-                   new Fun(){void f(){m.subMap(e,false,e,true)
-                                       .subMap(e,true,e,true);}},
-                   new Fun(){void f(){m.tailMap(e,false).tailMap(e,true);}},
-                   new Fun(){void f(){m.headMap(e,false).headMap(e,true);}});
+                   () -> {m.subMap(e,true,e,false)
+                           .subMap(e,true,e,true);},
+                   () -> {m.subMap(e,false,e,true)
+                           .subMap(e,true,e,true);},
+                   () -> m.tailMap(e,false).tailMap(e,true),
+                   () -> m.headMap(e,false).headMap(e,true));
         }
         //System.out.printf("%s%n", m1);
         for (int i = size; i > 0; i--) {
@@ -811,12 +809,12 @@
         for (final NavigableSet s : sets) {
             final Object e = usedElt(s);
             THROWS(IllegalArgumentException.class,
-                   new Fun(){void f(){s.subSet(e,true,e,false)
-                                       .subSet(e,true,e,true);}},
-                   new Fun(){void f(){s.subSet(e,false,e,true)
-                                       .subSet(e,true,e,true);}},
-                   new Fun(){void f(){s.tailSet(e,false).tailSet(e,true);}},
-                   new Fun(){void f(){s.headSet(e,false).headSet(e,true);}});
+                   () -> {s.subSet(e,true,e,false)
+                           .subSet(e,true,e,true);},
+                   () -> {s.subSet(e,false,e,true)
+                           .subSet(e,true,e,true);},
+                   () -> s.tailSet(e,false).tailSet(e,true),
+                   () -> s.headSet(e,false).headSet(e,true));
         }
         //System.out.printf("%s%n", s1);
         for (int i = size; i > 0; i--) {
@@ -847,7 +845,7 @@
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new Exception("Some tests failed");
     }
-    static abstract class Fun {abstract void f() throws Throwable;}
+    interface Fun {void f() throws Throwable;}
     static void THROWS(Class<? extends Throwable> k, Fun... fs) {
           for (Fun f : fs)
               try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
--- a/jdk/test/java/util/PriorityQueue/ForgetMeNot.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/util/PriorityQueue/ForgetMeNot.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2006, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -37,16 +37,14 @@
 
     private static void noMoreElements(final Iterator<Integer> it) {
         for (int j = 0; j < 2; j++) {
-            THROWS(NoSuchElementException.class,
-                   new Fun() { void f() { it.next(); }});
+            THROWS(NoSuchElementException.class, () -> it.next());
             check(! it.hasNext());
         }
     }
 
     private static void removeIsCurrentlyIllegal(final Iterator<Integer> it) {
         for (int j = 0; j < 2; j++) {
-            THROWS(IllegalStateException.class,
-                   new Fun() { void f() { it.remove(); }});
+            THROWS(IllegalStateException.class, () -> it.remove());
         }
     }
 
@@ -146,7 +144,7 @@
         try {realMain(args);} catch (Throwable t) {unexpected(t);}
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new AssertionError("Some tests failed");}
-    private static abstract class Fun {abstract void f() throws Throwable;}
+    interface Fun {void f() throws Throwable;}
     static void THROWS(Class<? extends Throwable> k, Fun... fs) {
         for (Fun f : fs)
             try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
--- a/jdk/test/java/util/concurrent/BlockingQueue/Interrupt.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/util/concurrent/BlockingQueue/Interrupt.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006, 2010, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2006, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -69,19 +69,13 @@
                 (BlockingDeque<Object>) q : null;
             q.clear();
             List<Fun> fs = new ArrayList<Fun>();
-            fs.add(new Fun() { void f() throws Throwable
-                    { q.take(); }});
-            fs.add(new Fun() { void f() throws Throwable
-                    { q.poll(60, SECONDS); }});
+            fs.add(() -> q.take());
+            fs.add(() -> q.poll(60, SECONDS));
             if (deq != null) {
-                fs.add(new Fun() { void f() throws Throwable
-                        { deq.takeFirst(); }});
-                fs.add(new Fun() { void f() throws Throwable
-                        { deq.takeLast(); }});
-                fs.add(new Fun() { void f() throws Throwable
-                        { deq.pollFirst(7, SECONDS); }});
-                fs.add(new Fun() { void f() throws Throwable
-                        { deq.pollLast(7, SECONDS); }});
+                fs.add(() -> deq.takeFirst());
+                fs.add(() -> deq.takeLast());
+                fs.add(() -> deq.pollFirst(7, SECONDS));
+                fs.add(() -> deq.pollLast(7, SECONDS));
             }
 
             checkInterrupted(fs);
@@ -92,19 +86,13 @@
                 catch (Throwable t) { unexpected(t); }
 
             fs.clear();
-            fs.add(new Fun() { void f() throws Throwable
-                    { q.put(1); }});
-            fs.add(new Fun() { void f() throws Throwable
-                    { q.offer(1, 7, SECONDS); }});
+            fs.add(() -> q.put(1));
+            fs.add(() -> q.offer(1, 7, SECONDS));
             if (deq != null) {
-                fs.add(new Fun() { void f() throws Throwable
-                        { deq.putFirst(1); }});
-                fs.add(new Fun() { void f() throws Throwable
-                        { deq.putLast(1); }});
-                fs.add(new Fun() { void f() throws Throwable
-                        { deq.offerFirst(1, 7, SECONDS); }});
-                fs.add(new Fun() { void f() throws Throwable
-                        { deq.offerLast(1, 7, SECONDS); }});
+                fs.add(() -> deq.putFirst(1));
+                fs.add(() -> deq.putLast(1));
+                fs.add(() -> deq.offerFirst(1, 7, SECONDS));
+                fs.add(() -> deq.offerLast(1, 7, SECONDS));
             }
             checkInterrupted(fs);
         } catch (Throwable t) {
@@ -135,5 +123,5 @@
         try {realMain(args);} catch (Throwable t) {unexpected(t);}
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new AssertionError("Some tests failed");}
-    private abstract static class Fun {abstract void f() throws Throwable;}
+    interface Fun {void f() throws Throwable;}
 }
--- a/jdk/test/java/util/concurrent/CyclicBarrier/Basic.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/util/concurrent/CyclicBarrier/Basic.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2005, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -40,10 +40,8 @@
         equal(barrier.getNumberWaiting(), 0);
 
         THROWS(BrokenBarrierException.class,
-               new Fun() { public void f() throws Throwable {
-                   barrier.await(); }},
-               new Fun() { public void f() throws Throwable {
-                   barrier.await(100, MILLISECONDS); }});
+               () -> barrier.await(),
+               () -> barrier.await(100, MILLISECONDS));
     }
 
     private static void reset(CyclicBarrier barrier) {
@@ -417,7 +415,7 @@
         try {realMain(args);} catch (Throwable t) {unexpected(t);}
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new AssertionError("Some tests failed");}
-    abstract static class Fun { abstract void f() throws Throwable; }
+    interface Fun {void f() throws Throwable;}
     private static void THROWS(Class<? extends Throwable> k, Fun... fs) {
         for (Fun f : fs)
             try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
--- a/jdk/test/java/util/concurrent/Executors/Throws.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/util/concurrent/Executors/Throws.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006, 2010, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2006, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -45,33 +45,31 @@
                                                   ThreadPoolExecutor executor) {}};
         final RejectedExecutionHandler nullHandler = null;
 
-        THROWS(
-            NullPointerException.class,
-            new Fun(){void f(){ newFixedThreadPool(3, null); }},
-            new Fun(){void f(){ newCachedThreadPool(null); }},
-            new Fun(){void f(){ newSingleThreadScheduledExecutor(null); }},
-            new Fun(){void f(){ newScheduledThreadPool(0, null); }},
-            new Fun(){void f(){ unconfigurableExecutorService(null); }},
-            new Fun(){void f(){ unconfigurableScheduledExecutorService(null); }},
-            new Fun(){void f(){ callable(null, "foo"); }},
-            new Fun(){void f(){ callable((Runnable) null); }},
-            new Fun(){void f(){ callable((PrivilegedAction<?>) null); }},
-            new Fun(){void f(){ callable((PrivilegedExceptionAction<?>) null); }},
-            new Fun(){void f(){ privilegedCallable((Callable<?>) null); }},
-            new Fun(){void f(){ new ScheduledThreadPoolExecutor(0, nullFactory); }},
-            new Fun(){void f(){ new ScheduledThreadPoolExecutor(0, nullFactory, reh); }},
-            new Fun(){void f(){ new ScheduledThreadPoolExecutor(0, fac, nullHandler); }});
+        THROWS(NullPointerException.class,
+               () -> newFixedThreadPool(3, null),
+               () -> newCachedThreadPool(null),
+               () -> newSingleThreadScheduledExecutor(null),
+               () -> newScheduledThreadPool(0, null),
+               () -> unconfigurableExecutorService(null),
+               () -> unconfigurableScheduledExecutorService(null),
+               () -> callable(null, "foo"),
+               () -> callable((Runnable) null),
+               () -> callable((PrivilegedAction<?>) null),
+               () -> callable((PrivilegedExceptionAction<?>) null),
+               () -> privilegedCallable((Callable<?>) null),
+               () -> new ScheduledThreadPoolExecutor(0, nullFactory),
+               () -> new ScheduledThreadPoolExecutor(0, nullFactory, reh),
+               () -> new ScheduledThreadPoolExecutor(0, fac, nullHandler));
 
-        THROWS(
-            IllegalArgumentException.class,
-            new Fun(){void f(){ newFixedThreadPool(-42); }},
-            new Fun(){void f(){ newFixedThreadPool(0)  ; }},
-            new Fun(){void f(){ newFixedThreadPool(-42, fac); }},
-            new Fun(){void f(){ newFixedThreadPool(0,   fac); }},
-            new Fun(){void f(){ newScheduledThreadPool(-42); }},
-            new Fun(){void f(){ new ScheduledThreadPoolExecutor(-42); }},
-            new Fun(){void f(){ new ScheduledThreadPoolExecutor(-42, reh); }},
-            new Fun(){void f(){ new ScheduledThreadPoolExecutor(-42, fac, reh); }});
+        THROWS(IllegalArgumentException.class,
+               () -> newFixedThreadPool(-42),
+               () -> newFixedThreadPool(0),
+               () -> newFixedThreadPool(-42, fac),
+               () -> newFixedThreadPool(0,   fac),
+               () -> newScheduledThreadPool(-42),
+               () -> new ScheduledThreadPoolExecutor(-42),
+               () -> new ScheduledThreadPoolExecutor(-42, reh),
+               () -> new ScheduledThreadPoolExecutor(-42, fac, reh));
 
         try { newFixedThreadPool(1).shutdownNow(); pass(); }
         catch (Throwable t) { unexpected(t); }
@@ -122,7 +120,7 @@
         try {realMain(args);} catch (Throwable t) {unexpected(t);}
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new AssertionError("Some tests failed");}
-    private abstract static class Fun {abstract void f() throws Throwable;}
+    interface Fun {void f() throws Throwable;}
     static void THROWS(Class<? extends Throwable> k, Fun... fs) {
         for (Fun f : fs)
             try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
--- a/jdk/test/java/util/concurrent/FutureTask/Customized.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/util/concurrent/FutureTask/Customized.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2007, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -70,8 +70,7 @@
         check(! task.isDone());
         check(! task.isCancelled());
         THROWS(TimeoutException.class,
-               new Fun(){void f() throws Throwable {
-                       task.get(0L, TimeUnit.SECONDS); }});
+               () -> task.get(0L, TimeUnit.SECONDS));
     }
 
     static <V> void checkDone(final FutureTask<V> task) {
@@ -86,20 +85,16 @@
         check(task.isDone());
         check(task.isCancelled());
         THROWS(CancellationException.class,
-           new Fun(){void f() throws Throwable {
-               task.get(0L, TimeUnit.SECONDS); }},
-           new Fun(){void f() throws Throwable {
-               task.get(); }});
+               () -> task.get(0L, TimeUnit.SECONDS),
+               () -> task.get());
     }
 
     static <V> void checkThrew(final FutureTask<V> task) {
         check(task.isDone());
         check(! task.isCancelled());
         THROWS(ExecutionException.class,
-           new Fun(){void f() throws Throwable {
-               task.get(0L, TimeUnit.SECONDS); }},
-           new Fun(){void f() throws Throwable {
-               task.get(); }});
+               () -> task.get(0L, TimeUnit.SECONDS),
+               () -> task.get());
     }
 
     static <V> void cancel(FutureTask<V> task, boolean mayInterruptIfRunning) {
@@ -203,7 +198,7 @@
         try {realMain(args);} catch (Throwable t) {unexpected(t);}
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new AssertionError("Some tests failed");}
-    private abstract static class Fun {abstract void f() throws Throwable;}
+    interface Fun {void f() throws Throwable;}
     static void THROWS(Class<? extends Throwable> k, Fun... fs) {
         for (Fun f : fs)
             try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
--- a/jdk/test/java/util/concurrent/ThreadPoolExecutor/ConfigChanges.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/util/concurrent/ThreadPoolExecutor/ConfigChanges.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2007, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -72,7 +72,7 @@
                     check(((ThreadPoolExecutor) es).isTerminating()
                           || es.isTerminated());
                 THROWS(RejectedExecutionException.class,
-                       new Fun() {void f() {es.execute(nop);}});
+                       () -> es.execute(nop));
             }
         } catch (Throwable t) { unexpected(t); }
     }
@@ -241,7 +241,7 @@
         try {realMain(args);} catch (Throwable t) {unexpected(t);}
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new AssertionError("Some tests failed");}
-    private abstract static class Fun {abstract void f() throws Throwable;}
+    interface Fun {void f() throws Throwable;}
     static void THROWS(Class<? extends Throwable> k, Fun... fs) {
         for (Fun f : fs)
             try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
--- a/jdk/test/java/util/concurrent/ThreadPoolExecutor/ShutdownNowExecuteRace.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/java/util/concurrent/ThreadPoolExecutor/ShutdownNowExecuteRace.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2007, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -81,13 +81,6 @@
         try {realMain(args);} catch (Throwable t) {unexpected(t);}
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new AssertionError("Some tests failed");}
-    private abstract static class Fun {abstract void f() throws Throwable;}
-    static void THROWS(Class<? extends Throwable> k, Fun... fs) {
-        for (Fun f : fs)
-            try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
-            catch (Throwable t) {
-                if (k.isAssignableFrom(t.getClass())) pass();
-                else unexpected(t);}}
     private abstract static class CheckedThread extends Thread {
         abstract void realRun() throws Throwable;
         public void run() {
--- a/jdk/test/sun/nio/cs/FindOneCharEncoderBugs.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/sun/nio/cs/FindOneCharEncoderBugs.java	Wed Jul 05 19:43:34 2017 +0200
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2008, 2014, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -155,13 +155,6 @@
         try {realMain(args);} catch (Throwable t) {unexpected(t);}
         System.out.printf("%nPassed = %d, failed = %d%n%n", passed, failed);
         if (failed > 0) throw new AssertionError("Some tests failed");}
-    private static abstract class Fun {abstract void f() throws Throwable;}
-    static void THROWS(Class<? extends Throwable> k, Fun... fs) {
-        for (Fun f : fs)
-            try { f.f(); fail("Expected " + k.getName() + " not thrown"); }
-            catch (Throwable t) {
-                if (k.isAssignableFrom(t.getClass())) pass();
-                else unexpected(t);}}
     private static abstract class CheckedThread extends Thread {
         abstract void realRun() throws Throwable;
         public void run() {
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/test/sun/security/tools/keytool/weaksize.sh	Wed Jul 05 19:43:34 2017 +0200
@@ -0,0 +1,60 @@
+#
+# Copyright (c) 2014, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+# @test
+# @bug 8044755
+# @summary Add a test for algorithm constraints check in jarsigner
+#
+
+if [ "${TESTJAVA}" = "" ] ; then
+  JAVAC_CMD=`which javac`
+  TESTJAVA=`dirname $JAVAC_CMD`/..
+fi
+
+# The sigalg used is MD2withRSA, which is obsolete.
+
+KT="$TESTJAVA/bin/keytool ${TESTTOOLVMOPTS} -keystore ks
+    -storepass changeit -keypass changeit
+    -keyalg rsa -sigalg MD2withRSA -debug"
+JS="$TESTJAVA/bin/jarsigner ${TESTTOOLVMOPTS} -keystore ks
+    -storepass changeit -strict -debug"
+JAR="$TESTJAVA/bin/jar ${TESTTOOLVMOPTS}"
+
+rm ks 2> /dev/null
+
+$KT -genkeypair -alias ca -dname CN=CA -ext bc
+$KT -genkeypair -alias signer -dname CN=Signer
+
+$KT -certreq -alias signer | \
+        $KT -gencert -alias ca -ext ku=dS -rfc | \
+        $KT -importcert -alias signer
+
+$JAR cvf a.jar ks
+
+# We always trust a TrustedCertificateEntry
+$JS a.jar ca || exit 1
+
+# An end-entity cert must follow algorithm constraints
+$JS a.jar signer && exit 2
+
+exit 0
--- a/jdk/test/sun/tools/jrunscript/jrunscriptTest.sh	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/sun/tools/jrunscript/jrunscriptTest.sh	Wed Jul 05 19:43:34 2017 +0200
@@ -42,7 +42,7 @@
 rm -f jrunscriptTest.out 2>/dev/null
 ${JRUNSCRIPT} -J-Djava.awt.headless=true -l nashorn > jrunscriptTest.out 2>&1 <<EOF
 v = 2 + 5;
-v *= 5;
+v *= 5; v.doubleValue();
 v = v + " is the value";
 if (v != 0) { println('yes v != 0'); }
 java.lang.System.out.println('hello world from script');
--- a/jdk/test/sun/tools/native2ascii/NativeErrors.java	Wed Jun 04 20:20:02 2014 -0700
+++ b/jdk/test/sun/tools/native2ascii/NativeErrors.java	Wed Jul 05 19:43:34 2017 +0200
@@ -73,7 +73,14 @@
             throw new Error("Output file cannot be made read only: " + path2);
         }
         f2.deleteOnExit();
-        checkResult(executeCmd(path1, path2), "err.cannot.write");
+        if ( f2.canWrite() ) {
+            String msg = "Output file is still writable. " +
+                    "Probably because test is run as root. Read-only test skipped.";
+            System.out.println(msg);
+        } else {
+            // Test write to a read-only file.
+            checkResult(executeCmd(path1, path2), "err.cannot.write");
+        }
     }
 
     private static String executeCmd(String... toolArgs) throws Throwable {