#
# Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
#
# Note: this makefile is invoked both from build.bat and from the J2SE
# control workspace in exactly the same manner; the required
# environment variables (Variant, WorkSpace, BootStrapDir, BuildUser, HOTSPOT_BUILD_VERSION)
# are passed in as command line arguments.
# Note: Running nmake or build.bat from the Windows command shell requires
# that "sh" be accessible on the PATH. An MKS install does this.
# SA components are built if BUILD_WIN_SA=1 is specified.
# See notes in README. This produces files:
# 1. sa-jdi.jar - This is built before building jvm.dll
# 2. sawindbg[_g].dll - Native library for SA - This is built after jvm.dll
# - Also, .lib, .map, .pdb.
#
# Please refer to ./makefiles/sa.make
# If we haven't set an ARCH yet use x86
# create.bat and build.bat will set it, if used.
!ifndef ARCH
ARCH=x86
!endif
# Must be one of these values (if value comes in from env, can't trust it)
!if "$(ARCH)" != "x86"
!if "$(ARCH)" != "ia64"
ARCH=x86
!endif
!endif
# At this point we should be certain that ARCH has a definition
# now determine the BUILDARCH
#
# the default BUILDARCH
BUILDARCH=i486
# Allow control workspace to force Itanium or AMD64 builds with LP64
ARCH_TEXT=
!ifdef LP64
!if "$(LP64)" == "1"
ARCH_TEXT=64-Bit
!if "$(ARCH)" == "x86"
BUILDARCH=amd64
!else
BUILDARCH=ia64
!endif
!endif
!endif
!if "$(BUILDARCH)" != "ia64"
!ifndef CC_INTERP
!ifndef FORCE_TIERED
FORCE_TIERED=1
!endif
!endif
!endif
!if "$(BUILDARCH)" == "amd64"
Platform_arch=x86
Platform_arch_model=x86_64
!endif
!if "$(BUILDARCH)" == "i486"
Platform_arch=x86
Platform_arch_model=x86_32
!endif
# Supply these from the command line or the environment
# It doesn't make sense to default this one
Variant=
# It doesn't make sense to default this one
WorkSpace=
variantDir = windows_$(BUILDARCH)_$(Variant)
realVariant=$(Variant)
VARIANT_TEXT=Core
!if "$(Variant)" == "compiler1"
VARIANT_TEXT=Client
!elseif "$(Variant)" == "compiler2"
!if "$(FORCE_TIERED)" == "1"
VARIANT_TEXT=Server
realVariant=tiered
!else
VARIANT_TEXT=Server
!endif
!elseif "$(Variant)" == "tiered"
VARIANT_TEXT=Tiered
!elseif "$(Variant)" == "kernel"
VARIANT_TEXT=Kernel
!endif
#########################################################################
# Parameters for VERSIONINFO resource for jvm[_g].dll.
# These can be overridden via the nmake.exe command line.
# They are overridden by RE during the control builds.
#
!include "$(WorkSpace)/make/hotspot_version"
# Define HOTSPOT_VM_DISTRO based on settings in make/openjdk_distro
# or make/hotspot_distro.
!ifndef HOTSPOT_VM_DISTRO
!if exists($(WorkSpace)\src\closed)
!include $(WorkSpace)\make\hotspot_distro
!else
!include $(WorkSpace)\make\openjdk_distro
!endif
!endif
# Following the Web Start / Plugin model here....
# We can have update versions like "01a", but Windows requires
# we use only integers in the file version field. So:
# JDK_UPDATE_VER = JDK_UPDATE_VERSION * 10 + EXCEPTION_VERSION
#
JDK_UPDATE_VER=0
JDK_BUILD_NUMBER=0
HS_FILEDESC=$(HOTSPOT_VM_DISTRO) $(ARCH_TEXT) $(VARIANT_TEXT) VM
# JDK ProductVersion:
# 1.5.0_<wx>-b<yz> will have DLL version 5.0.wx*10.yz
# Thus, 1.5.0_10-b04 will be 5.0.100.4
# 1.6.0-b01 will be 6.0.0.1
# 1.6.0_01a-b02 will be 6.0.11.2
#
# JDK_* variables are defined in make/hotspot_version or on command line
#
JDK_VER=$(JDK_MINOR_VER),$(JDK_MICRO_VER),$(JDK_UPDATE_VER),$(JDK_BUILD_NUMBER)
JDK_DOTVER=$(JDK_MINOR_VER).$(JDK_MICRO_VER).$(JDK_UPDATE_VER).$(JDK_BUILD_NUMBER)
!if "$(JRE_RELEASE_VERSION)" == ""
JRE_RELEASE_VER=$(JDK_MAJOR_VER).$(JDK_MINOR_VER).$(JDK_MICRO_VER)
!else
JRE_RELEASE_VER=$(JRE_RELEASE_VERSION)
!endif
!if "$(JDK_MKTG_VERSION)" == ""
JDK_MKTG_VERSION=$(JDK_MINOR_VER).$(JDK_MICRO_VER)
!endif
# Hotspot Express VM FileVersion:
# 10.0-b<yz> will have DLL version 10.0.0.yz (need 4 numbers).
#
# HS_* variables are defined in make/hotspot_version
#
HS_VER=$(HS_MAJOR_VER),$(HS_MINOR_VER),0,$(HS_BUILD_NUMBER)
HS_DOTVER=$(HS_MAJOR_VER).$(HS_MINOR_VER).0.$(HS_BUILD_NUMBER)
!if "$(HOTSPOT_RELEASE_VERSION)" == ""
HOTSPOT_RELEASE_VERSION=$(HS_MAJOR_VER).$(HS_MINOR_VER)-b$(HS_BUILD_NUMBER)
!endif
!if "$(HOTSPOT_BUILD_VERSION)" == ""
HS_BUILD_VER=$(HOTSPOT_RELEASE_VERSION)
!else
HS_BUILD_VER=$(HOTSPOT_RELEASE_VERSION)-$(HOTSPOT_BUILD_VERSION)
!endif
# End VERSIONINFO parameters
# We don't support SA on ia64, and we can't
# build it if we are using a version of Vis Studio
# older than .Net 2003.
# SA_INCLUDE and SA_LIB are hold-overs from a previous
# implementation in which we could build SA using
# Debugging Tools For Windows, in which the .h/.lib files
# and the .dlls are in different places than
# they are for Vis Studio .Net 2003.
# If that code ever needs to be resurrected, these vars
# can be set here. They are used in makefiles/sa.make.
checkSA::
!if "$(BUILD_WIN_SA)" != "1"
checkSA::
@echo Not building SA: BUILD_WIN_SA != 1
!elseif "$(ARCH)" == "ia64"
BUILD_WIN_SA = 0
checkSA::
@echo Not building SA: ARCH = ia64
!endif # ! "$(BUILD_WIN_SA)" != "1"
#########################################################################
# With the jvm_g.dll now being named jvm.dll, we can't build both and place
# the dll's in the same directory, so we only build one at a time,
# re-directing the output to different output directories (done by user
# of this makefile).
#
defaultTarget: product
# The product or release build is an optimized build, and is the default
# note that since all the build targets depend on local.make that BUILDARCH
# and Platform_arch and Platform_arch_model will get set in local.make
# and there is no need to pass them thru here on the command line
#
product release optimized: checks $(variantDir) $(variantDir)\local.make sanity
cd $(variantDir)
nmake -nologo -f $(WorkSpace)\make\windows\makefiles\top.make BUILD_FLAVOR=product ARCH=$(ARCH)
# The debug or jvmg (all the same thing) is an optional build
debug jvmg: checks $(variantDir) $(variantDir)\local.make sanity
cd $(variantDir)
nmake -nologo -f $(WorkSpace)\make\windows\makefiles\top.make BUILD_FLAVOR=debug ARCH=$(ARCH)
fastdebug: checks $(variantDir) $(variantDir)\local.make sanity
cd $(variantDir)
nmake -nologo -f $(WorkSpace)\make\windows\makefiles\top.make BUILD_FLAVOR=fastdebug ARCH=$(ARCH)
develop: checks $(variantDir) $(variantDir)\local.make sanity
cd $(variantDir)
nmake -nologo -f $(WorkSpace)\make\windows\makefiles\top.make BUILD_FLAVOR=product DEVELOP=1 ARCH=$(ARCH)
# target to create just the directory structure
tree: checks $(variantDir) $(variantDir)\local.make sanity
mkdir $(variantDir)\product
mkdir $(variantDir)\debug
mkdir $(variantDir)\fastdebug
sanity:
@ echo;
@ cd $(variantDir)
@ nmake -nologo -f $(WorkSpace)\make\windows\makefiles\sanity.make
@ cd ..
@ echo;
clean: checkVariant
- rm -r -f $(variantDir)
$(variantDir):
mkdir $(variantDir)
$(variantDir)\local.make: checks
@ echo # Generated file > $@
@ echo Variant=$(realVariant) >> $@
@ echo WorkSpace=$(WorkSpace) >> $@
@ echo BootStrapDir=$(BootStrapDir) >> $@
@ if "$(USERNAME)" NEQ "" echo BuildUser=$(USERNAME) >> $@
@ echo HS_VER=$(HS_VER) >> $@
@ echo HS_DOTVER=$(HS_DOTVER) >> $@
@ echo HS_COMPANY=$(COMPANY_NAME) >> $@
@ echo HS_FILEDESC=$(HS_FILEDESC) >> $@
@ echo HOTSPOT_VM_DISTRO=$(HOTSPOT_VM_DISTRO) >> $@
@ echo HS_COPYRIGHT=$(HOTSPOT_VM_COPYRIGHT) >> $@
@ echo HS_NAME=$(PRODUCT_NAME) $(JDK_MKTG_VERSION) >> $@
@ echo HS_BUILD_VER=$(HS_BUILD_VER) >> $@
@ echo BUILD_WIN_SA=$(BUILD_WIN_SA) >> $@
@ echo SA_BUILD_VERSION=$(HS_BUILD_VER) >> $@
@ echo SA_INCLUDE=$(SA_INCLUDE) >> $@
@ echo SA_LIB=$(SA_LIB) >> $@
@ echo JDK_VER=$(JDK_VER) >> $@
@ echo JDK_DOTVER=$(JDK_DOTVER) >> $@
@ echo JRE_RELEASE_VER=$(JRE_RELEASE_VER) >> $@
@ echo BUILDARCH=$(BUILDARCH) >> $@
@ echo Platform_arch=$(Platform_arch) >> $@
@ echo Platform_arch_model=$(Platform_arch_model) >> $@
@ sh $(WorkSpace)/make/windows/get_msc_ver.sh >> $@
checks: checkVariant checkWorkSpace checkSA
checkVariant:
@ if "$(Variant)"=="" echo Need to specify "Variant=[tiered|compiler2|compiler1|kernel|core]" && false
@ if "$(Variant)" NEQ "tiered" if "$(Variant)" NEQ "compiler2" if "$(Variant)" NEQ "compiler1" if "$(Variant)" NEQ "kernel" if "$(Variant)" NEQ "core" \
echo Need to specify "Variant=[tiered|compiler2|compiler1|kernel|core]" && false
checkWorkSpace:
@ if "$(WorkSpace)"=="" echo Need to specify "WorkSpace=..." && false
checkBuildID:
@ if "$(BuildID)"=="" echo Need to specify "BuildID=..." && false