6787106: Hotspot 32 bit build fails on platforms having different definitions for intptr_t & int32_t
Summary: Avoid casting between int32_t and intptr_t specifically for MasmAssembler::movptr in 32 bit platforms.
Reviewed-by: jrose, kvn
/*
* Copyright 1999-2008 Sun Microsystems, Inc. All Rights Reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* have any questions.
*
*/
#include "incls/_precompiled.incl"
#include "incls/_stubGenerator_x86_32.cpp.incl"
// Declaration and definition of StubGenerator (no .hpp file).
// For a more detailed description of the stub routine structure
// see the comment in stubRoutines.hpp
#define __ _masm->
#define a__ ((Assembler*)_masm)->
#ifdef PRODUCT
#define BLOCK_COMMENT(str) /* nothing */
#else
#define BLOCK_COMMENT(str) __ block_comment(str)
#endif
#define BIND(label) bind(label); BLOCK_COMMENT(#label ":")
const int MXCSR_MASK = 0xFFC0; // Mask out any pending exceptions
const int FPU_CNTRL_WRD_MASK = 0xFFFF;
// -------------------------------------------------------------------------------------------------------------------------
// Stub Code definitions
static address handle_unsafe_access() {
JavaThread* thread = JavaThread::current();
address pc = thread->saved_exception_pc();
// pc is the instruction which we must emulate
// doing a no-op is fine: return garbage from the load
// therefore, compute npc
address npc = Assembler::locate_next_instruction(pc);
// request an async exception
thread->set_pending_unsafe_access_error();
// return address of next instruction to execute
return npc;
}
class StubGenerator: public StubCodeGenerator {
private:
#ifdef PRODUCT
#define inc_counter_np(counter) (0)
#else
void inc_counter_np_(int& counter) {
__ incrementl(ExternalAddress((address)&counter));
}
#define inc_counter_np(counter) \
BLOCK_COMMENT("inc_counter " #counter); \
inc_counter_np_(counter);
#endif //PRODUCT
void inc_copy_counter_np(BasicType t) {
#ifndef PRODUCT
switch (t) {
case T_BYTE: inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); return;
case T_SHORT: inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); return;
case T_INT: inc_counter_np(SharedRuntime::_jint_array_copy_ctr); return;
case T_LONG: inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); return;
case T_OBJECT: inc_counter_np(SharedRuntime::_oop_array_copy_ctr); return;
}
ShouldNotReachHere();
#endif //PRODUCT
}
//------------------------------------------------------------------------------------------------------------------------
// Call stubs are used to call Java from C
//
// [ return_from_Java ] <--- rsp
// [ argument word n ]
// ...
// -N [ argument word 1 ]
// -7 [ Possible padding for stack alignment ]
// -6 [ Possible padding for stack alignment ]
// -5 [ Possible padding for stack alignment ]
// -4 [ mxcsr save ] <--- rsp_after_call
// -3 [ saved rbx, ]
// -2 [ saved rsi ]
// -1 [ saved rdi ]
// 0 [ saved rbp, ] <--- rbp,
// 1 [ return address ]
// 2 [ ptr. to call wrapper ]
// 3 [ result ]
// 4 [ result_type ]
// 5 [ method ]
// 6 [ entry_point ]
// 7 [ parameters ]
// 8 [ parameter_size ]
// 9 [ thread ]
address generate_call_stub(address& return_address) {
StubCodeMark mark(this, "StubRoutines", "call_stub");
address start = __ pc();
// stub code parameters / addresses
assert(frame::entry_frame_call_wrapper_offset == 2, "adjust this code");
bool sse_save = false;
const Address rsp_after_call(rbp, -4 * wordSize); // same as in generate_catch_exception()!
const int locals_count_in_bytes (4*wordSize);
const Address mxcsr_save (rbp, -4 * wordSize);
const Address saved_rbx (rbp, -3 * wordSize);
const Address saved_rsi (rbp, -2 * wordSize);
const Address saved_rdi (rbp, -1 * wordSize);
const Address result (rbp, 3 * wordSize);
const Address result_type (rbp, 4 * wordSize);
const Address method (rbp, 5 * wordSize);
const Address entry_point (rbp, 6 * wordSize);
const Address parameters (rbp, 7 * wordSize);
const Address parameter_size(rbp, 8 * wordSize);
const Address thread (rbp, 9 * wordSize); // same as in generate_catch_exception()!
sse_save = UseSSE > 0;
// stub code
__ enter();
__ movptr(rcx, parameter_size); // parameter counter
__ shlptr(rcx, Interpreter::logStackElementSize()); // convert parameter count to bytes
__ addptr(rcx, locals_count_in_bytes); // reserve space for register saves
__ subptr(rsp, rcx);
__ andptr(rsp, -(StackAlignmentInBytes)); // Align stack
// save rdi, rsi, & rbx, according to C calling conventions
__ movptr(saved_rdi, rdi);
__ movptr(saved_rsi, rsi);
__ movptr(saved_rbx, rbx);
// save and initialize %mxcsr
if (sse_save) {
Label skip_ldmx;
__ stmxcsr(mxcsr_save);
__ movl(rax, mxcsr_save);
__ andl(rax, MXCSR_MASK); // Only check control and mask bits
ExternalAddress mxcsr_std(StubRoutines::addr_mxcsr_std());
__ cmp32(rax, mxcsr_std);
__ jcc(Assembler::equal, skip_ldmx);
__ ldmxcsr(mxcsr_std);
__ bind(skip_ldmx);
}
// make sure the control word is correct.
__ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
#ifdef ASSERT
// make sure we have no pending exceptions
{ Label L;
__ movptr(rcx, thread);
__ cmpptr(Address(rcx, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
__ jcc(Assembler::equal, L);
__ stop("StubRoutines::call_stub: entered with pending exception");
__ bind(L);
}
#endif
// pass parameters if any
BLOCK_COMMENT("pass parameters if any");
Label parameters_done;
__ movl(rcx, parameter_size); // parameter counter
__ testl(rcx, rcx);
__ jcc(Assembler::zero, parameters_done);
// parameter passing loop
Label loop;
// Copy Java parameters in reverse order (receiver last)
// Note that the argument order is inverted in the process
// source is rdx[rcx: N-1..0]
// dest is rsp[rbx: 0..N-1]
__ movptr(rdx, parameters); // parameter pointer
__ xorptr(rbx, rbx);
__ BIND(loop);
if (TaggedStackInterpreter) {
__ movptr(rax, Address(rdx, rcx, Interpreter::stackElementScale(),
-2*wordSize)); // get tag
__ movptr(Address(rsp, rbx, Interpreter::stackElementScale(),
Interpreter::expr_tag_offset_in_bytes(0)), rax); // store tag
}
// get parameter
__ movptr(rax, Address(rdx, rcx, Interpreter::stackElementScale(), -wordSize));
__ movptr(Address(rsp, rbx, Interpreter::stackElementScale(),
Interpreter::expr_offset_in_bytes(0)), rax); // store parameter
__ increment(rbx);
__ decrement(rcx);
__ jcc(Assembler::notZero, loop);
// call Java function
__ BIND(parameters_done);
__ movptr(rbx, method); // get methodOop
__ movptr(rax, entry_point); // get entry_point
__ mov(rsi, rsp); // set sender sp
BLOCK_COMMENT("call Java function");
__ call(rax);
BLOCK_COMMENT("call_stub_return_address:");
return_address = __ pc();
Label common_return;
__ BIND(common_return);
// store result depending on type
// (everything that is not T_LONG, T_FLOAT or T_DOUBLE is treated as T_INT)
__ movptr(rdi, result);
Label is_long, is_float, is_double, exit;
__ movl(rsi, result_type);
__ cmpl(rsi, T_LONG);
__ jcc(Assembler::equal, is_long);
__ cmpl(rsi, T_FLOAT);
__ jcc(Assembler::equal, is_float);
__ cmpl(rsi, T_DOUBLE);
__ jcc(Assembler::equal, is_double);
// handle T_INT case
__ movl(Address(rdi, 0), rax);
__ BIND(exit);
// check that FPU stack is empty
__ verify_FPU(0, "generate_call_stub");
// pop parameters
__ lea(rsp, rsp_after_call);
// restore %mxcsr
if (sse_save) {
__ ldmxcsr(mxcsr_save);
}
// restore rdi, rsi and rbx,
__ movptr(rbx, saved_rbx);
__ movptr(rsi, saved_rsi);
__ movptr(rdi, saved_rdi);
__ addptr(rsp, 4*wordSize);
// return
__ pop(rbp);
__ ret(0);
// handle return types different from T_INT
__ BIND(is_long);
__ movl(Address(rdi, 0 * wordSize), rax);
__ movl(Address(rdi, 1 * wordSize), rdx);
__ jmp(exit);
__ BIND(is_float);
// interpreter uses xmm0 for return values
if (UseSSE >= 1) {
__ movflt(Address(rdi, 0), xmm0);
} else {
__ fstp_s(Address(rdi, 0));
}
__ jmp(exit);
__ BIND(is_double);
// interpreter uses xmm0 for return values
if (UseSSE >= 2) {
__ movdbl(Address(rdi, 0), xmm0);
} else {
__ fstp_d(Address(rdi, 0));
}
__ jmp(exit);
// If we call compiled code directly from the call stub we will
// need to adjust the return back to the call stub to a specialized
// piece of code that can handle compiled results and cleaning the fpu
// stack. compiled code will be set to return here instead of the
// return above that handles interpreter returns.
BLOCK_COMMENT("call_stub_compiled_return:");
StubRoutines::x86::set_call_stub_compiled_return( __ pc());
#ifdef COMPILER2
if (UseSSE >= 2) {
__ verify_FPU(0, "call_stub_compiled_return");
} else {
for (int i = 1; i < 8; i++) {
__ ffree(i);
}
// UseSSE <= 1 so double result should be left on TOS
__ movl(rsi, result_type);
__ cmpl(rsi, T_DOUBLE);
__ jcc(Assembler::equal, common_return);
if (UseSSE == 0) {
// UseSSE == 0 so float result should be left on TOS
__ cmpl(rsi, T_FLOAT);
__ jcc(Assembler::equal, common_return);
}
__ ffree(0);
}
#endif /* COMPILER2 */
__ jmp(common_return);
return start;
}
//------------------------------------------------------------------------------------------------------------------------
// Return point for a Java call if there's an exception thrown in Java code.
// The exception is caught and transformed into a pending exception stored in
// JavaThread that can be tested from within the VM.
//
// Note: Usually the parameters are removed by the callee. In case of an exception
// crossing an activation frame boundary, that is not the case if the callee
// is compiled code => need to setup the rsp.
//
// rax,: exception oop
address generate_catch_exception() {
StubCodeMark mark(this, "StubRoutines", "catch_exception");
const Address rsp_after_call(rbp, -4 * wordSize); // same as in generate_call_stub()!
const Address thread (rbp, 9 * wordSize); // same as in generate_call_stub()!
address start = __ pc();
// get thread directly
__ movptr(rcx, thread);
#ifdef ASSERT
// verify that threads correspond
{ Label L;
__ get_thread(rbx);
__ cmpptr(rbx, rcx);
__ jcc(Assembler::equal, L);
__ stop("StubRoutines::catch_exception: threads must correspond");
__ bind(L);
}
#endif
// set pending exception
__ verify_oop(rax);
__ movptr(Address(rcx, Thread::pending_exception_offset()), rax );
__ lea(Address(rcx, Thread::exception_file_offset ()),
ExternalAddress((address)__FILE__));
__ movl(Address(rcx, Thread::exception_line_offset ()), __LINE__ );
// complete return to VM
assert(StubRoutines::_call_stub_return_address != NULL, "_call_stub_return_address must have been generated before");
__ jump(RuntimeAddress(StubRoutines::_call_stub_return_address));
return start;
}
//------------------------------------------------------------------------------------------------------------------------
// Continuation point for runtime calls returning with a pending exception.
// The pending exception check happened in the runtime or native call stub.
// The pending exception in Thread is converted into a Java-level exception.
//
// Contract with Java-level exception handlers:
// rax,: exception
// rdx: throwing pc
//
// NOTE: At entry of this stub, exception-pc must be on stack !!
address generate_forward_exception() {
StubCodeMark mark(this, "StubRoutines", "forward exception");
address start = __ pc();
// Upon entry, the sp points to the return address returning into Java
// (interpreted or compiled) code; i.e., the return address becomes the
// throwing pc.
//
// Arguments pushed before the runtime call are still on the stack but
// the exception handler will reset the stack pointer -> ignore them.
// A potential result in registers can be ignored as well.
#ifdef ASSERT
// make sure this code is only executed if there is a pending exception
{ Label L;
__ get_thread(rcx);
__ cmpptr(Address(rcx, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
__ jcc(Assembler::notEqual, L);
__ stop("StubRoutines::forward exception: no pending exception (1)");
__ bind(L);
}
#endif
// compute exception handler into rbx,
__ movptr(rax, Address(rsp, 0));
BLOCK_COMMENT("call exception_handler_for_return_address");
__ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address), rax);
__ mov(rbx, rax);
// setup rax, & rdx, remove return address & clear pending exception
__ get_thread(rcx);
__ pop(rdx);
__ movptr(rax, Address(rcx, Thread::pending_exception_offset()));
__ movptr(Address(rcx, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
#ifdef ASSERT
// make sure exception is set
{ Label L;
__ testptr(rax, rax);
__ jcc(Assembler::notEqual, L);
__ stop("StubRoutines::forward exception: no pending exception (2)");
__ bind(L);
}
#endif
// continue at exception handler (return address removed)
// rax,: exception
// rbx,: exception handler
// rdx: throwing pc
__ verify_oop(rax);
__ jmp(rbx);
return start;
}
//----------------------------------------------------------------------------------------------------
// Support for jint Atomic::xchg(jint exchange_value, volatile jint* dest)
//
// xchg exists as far back as 8086, lock needed for MP only
// Stack layout immediately after call:
//
// 0 [ret addr ] <--- rsp
// 1 [ ex ]
// 2 [ dest ]
//
// Result: *dest <- ex, return (old *dest)
//
// Note: win32 does not currently use this code
address generate_atomic_xchg() {
StubCodeMark mark(this, "StubRoutines", "atomic_xchg");
address start = __ pc();
__ push(rdx);
Address exchange(rsp, 2 * wordSize);
Address dest_addr(rsp, 3 * wordSize);
__ movl(rax, exchange);
__ movptr(rdx, dest_addr);
__ xchgl(rax, Address(rdx, 0));
__ pop(rdx);
__ ret(0);
return start;
}
//----------------------------------------------------------------------------------------------------
// Support for void verify_mxcsr()
//
// This routine is used with -Xcheck:jni to verify that native
// JNI code does not return to Java code without restoring the
// MXCSR register to our expected state.
address generate_verify_mxcsr() {
StubCodeMark mark(this, "StubRoutines", "verify_mxcsr");
address start = __ pc();
const Address mxcsr_save(rsp, 0);
if (CheckJNICalls && UseSSE > 0 ) {
Label ok_ret;
ExternalAddress mxcsr_std(StubRoutines::addr_mxcsr_std());
__ push(rax);
__ subptr(rsp, wordSize); // allocate a temp location
__ stmxcsr(mxcsr_save);
__ movl(rax, mxcsr_save);
__ andl(rax, MXCSR_MASK);
__ cmp32(rax, mxcsr_std);
__ jcc(Assembler::equal, ok_ret);
__ warn("MXCSR changed by native JNI code.");
__ ldmxcsr(mxcsr_std);
__ bind(ok_ret);
__ addptr(rsp, wordSize);
__ pop(rax);
}
__ ret(0);
return start;
}
//---------------------------------------------------------------------------
// Support for void verify_fpu_cntrl_wrd()
//
// This routine is used with -Xcheck:jni to verify that native
// JNI code does not return to Java code without restoring the
// FP control word to our expected state.
address generate_verify_fpu_cntrl_wrd() {
StubCodeMark mark(this, "StubRoutines", "verify_spcw");
address start = __ pc();
const Address fpu_cntrl_wrd_save(rsp, 0);
if (CheckJNICalls) {
Label ok_ret;
__ push(rax);
__ subptr(rsp, wordSize); // allocate a temp location
__ fnstcw(fpu_cntrl_wrd_save);
__ movl(rax, fpu_cntrl_wrd_save);
__ andl(rax, FPU_CNTRL_WRD_MASK);
ExternalAddress fpu_std(StubRoutines::addr_fpu_cntrl_wrd_std());
__ cmp32(rax, fpu_std);
__ jcc(Assembler::equal, ok_ret);
__ warn("Floating point control word changed by native JNI code.");
__ fldcw(fpu_std);
__ bind(ok_ret);
__ addptr(rsp, wordSize);
__ pop(rax);
}
__ ret(0);
return start;
}
//---------------------------------------------------------------------------
// Wrapper for slow-case handling of double-to-integer conversion
// d2i or f2i fast case failed either because it is nan or because
// of under/overflow.
// Input: FPU TOS: float value
// Output: rax, (rdx): integer (long) result
address generate_d2i_wrapper(BasicType t, address fcn) {
StubCodeMark mark(this, "StubRoutines", "d2i_wrapper");
address start = __ pc();
// Capture info about frame layout
enum layout { FPUState_off = 0,
rbp_off = FPUStateSizeInWords,
rdi_off,
rsi_off,
rcx_off,
rbx_off,
saved_argument_off,
saved_argument_off2, // 2nd half of double
framesize
};
assert(FPUStateSizeInWords == 27, "update stack layout");
// Save outgoing argument to stack across push_FPU_state()
__ subptr(rsp, wordSize * 2);
__ fstp_d(Address(rsp, 0));
// Save CPU & FPU state
__ push(rbx);
__ push(rcx);
__ push(rsi);
__ push(rdi);
__ push(rbp);
__ push_FPU_state();
// push_FPU_state() resets the FP top of stack
// Load original double into FP top of stack
__ fld_d(Address(rsp, saved_argument_off * wordSize));
// Store double into stack as outgoing argument
__ subptr(rsp, wordSize*2);
__ fst_d(Address(rsp, 0));
// Prepare FPU for doing math in C-land
__ empty_FPU_stack();
// Call the C code to massage the double. Result in EAX
if (t == T_INT)
{ BLOCK_COMMENT("SharedRuntime::d2i"); }
else if (t == T_LONG)
{ BLOCK_COMMENT("SharedRuntime::d2l"); }
__ call_VM_leaf( fcn, 2 );
// Restore CPU & FPU state
__ pop_FPU_state();
__ pop(rbp);
__ pop(rdi);
__ pop(rsi);
__ pop(rcx);
__ pop(rbx);
__ addptr(rsp, wordSize * 2);
__ ret(0);
return start;
}
//---------------------------------------------------------------------------
// The following routine generates a subroutine to throw an asynchronous
// UnknownError when an unsafe access gets a fault that could not be
// reasonably prevented by the programmer. (Example: SIGBUS/OBJERR.)
address generate_handler_for_unsafe_access() {
StubCodeMark mark(this, "StubRoutines", "handler_for_unsafe_access");
address start = __ pc();
__ push(0); // hole for return address-to-be
__ pusha(); // push registers
Address next_pc(rsp, RegisterImpl::number_of_registers * BytesPerWord);
BLOCK_COMMENT("call handle_unsafe_access");
__ call(RuntimeAddress(CAST_FROM_FN_PTR(address, handle_unsafe_access)));
__ movptr(next_pc, rax); // stuff next address
__ popa();
__ ret(0); // jump to next address
return start;
}
//----------------------------------------------------------------------------------------------------
// Non-destructive plausibility checks for oops
address generate_verify_oop() {
StubCodeMark mark(this, "StubRoutines", "verify_oop");
address start = __ pc();
// Incoming arguments on stack after saving rax,:
//
// [tos ]: saved rdx
// [tos + 1]: saved EFLAGS
// [tos + 2]: return address
// [tos + 3]: char* error message
// [tos + 4]: oop object to verify
// [tos + 5]: saved rax, - saved by caller and bashed
Label exit, error;
__ pushf();
__ incrementl(ExternalAddress((address) StubRoutines::verify_oop_count_addr()));
__ push(rdx); // save rdx
// make sure object is 'reasonable'
__ movptr(rax, Address(rsp, 4 * wordSize)); // get object
__ testptr(rax, rax);
__ jcc(Assembler::zero, exit); // if obj is NULL it is ok
// Check if the oop is in the right area of memory
const int oop_mask = Universe::verify_oop_mask();
const int oop_bits = Universe::verify_oop_bits();
__ mov(rdx, rax);
__ andptr(rdx, oop_mask);
__ cmpptr(rdx, oop_bits);
__ jcc(Assembler::notZero, error);
// make sure klass is 'reasonable'
__ movptr(rax, Address(rax, oopDesc::klass_offset_in_bytes())); // get klass
__ testptr(rax, rax);
__ jcc(Assembler::zero, error); // if klass is NULL it is broken
// Check if the klass is in the right area of memory
const int klass_mask = Universe::verify_klass_mask();
const int klass_bits = Universe::verify_klass_bits();
__ mov(rdx, rax);
__ andptr(rdx, klass_mask);
__ cmpptr(rdx, klass_bits);
__ jcc(Assembler::notZero, error);
// make sure klass' klass is 'reasonable'
__ movptr(rax, Address(rax, oopDesc::klass_offset_in_bytes())); // get klass' klass
__ testptr(rax, rax);
__ jcc(Assembler::zero, error); // if klass' klass is NULL it is broken
__ mov(rdx, rax);
__ andptr(rdx, klass_mask);
__ cmpptr(rdx, klass_bits);
__ jcc(Assembler::notZero, error); // if klass not in right area
// of memory it is broken too.
// return if everything seems ok
__ bind(exit);
__ movptr(rax, Address(rsp, 5 * wordSize)); // get saved rax, back
__ pop(rdx); // restore rdx
__ popf(); // restore EFLAGS
__ ret(3 * wordSize); // pop arguments
// handle errors
__ bind(error);
__ movptr(rax, Address(rsp, 5 * wordSize)); // get saved rax, back
__ pop(rdx); // get saved rdx back
__ popf(); // get saved EFLAGS off stack -- will be ignored
__ pusha(); // push registers (eip = return address & msg are already pushed)
BLOCK_COMMENT("call MacroAssembler::debug");
__ call(RuntimeAddress(CAST_FROM_FN_PTR(address, MacroAssembler::debug32)));
__ popa();
__ ret(3 * wordSize); // pop arguments
return start;
}
//
// Generate pre-barrier for array stores
//
// Input:
// start - starting address
// end - element count
void gen_write_ref_array_pre_barrier(Register start, Register count) {
assert_different_registers(start, count);
BarrierSet* bs = Universe::heap()->barrier_set();
switch (bs->kind()) {
case BarrierSet::G1SATBCT:
case BarrierSet::G1SATBCTLogging:
{
__ pusha(); // push registers
__ push(count);
__ push(start);
__ call(RuntimeAddress(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_pre)));
__ addptr(rsp, 2*wordSize);
__ popa();
}
break;
case BarrierSet::CardTableModRef:
case BarrierSet::CardTableExtension:
case BarrierSet::ModRef:
break;
default :
ShouldNotReachHere();
}
}
//
// Generate a post-barrier for an array store
//
// start - starting address
// count - element count
//
// The two input registers are overwritten.
//
void gen_write_ref_array_post_barrier(Register start, Register count) {
BarrierSet* bs = Universe::heap()->barrier_set();
assert_different_registers(start, count);
switch (bs->kind()) {
case BarrierSet::G1SATBCT:
case BarrierSet::G1SATBCTLogging:
{
__ pusha(); // push registers
__ push(count);
__ push(start);
__ call(RuntimeAddress(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_post)));
__ addptr(rsp, 2*wordSize);
__ popa();
}
break;
case BarrierSet::CardTableModRef:
case BarrierSet::CardTableExtension:
{
CardTableModRefBS* ct = (CardTableModRefBS*)bs;
assert(sizeof(*ct->byte_map_base) == sizeof(jbyte), "adjust this code");
Label L_loop;
const Register end = count; // elements count; end == start+count-1
assert_different_registers(start, end);
__ lea(end, Address(start, count, Address::times_ptr, -wordSize));
__ shrptr(start, CardTableModRefBS::card_shift);
__ shrptr(end, CardTableModRefBS::card_shift);
__ subptr(end, start); // end --> count
__ BIND(L_loop);
intptr_t disp = (intptr_t) ct->byte_map_base;
Address cardtable(start, count, Address::times_1, disp);
__ movb(cardtable, 0);
__ decrement(count);
__ jcc(Assembler::greaterEqual, L_loop);
}
break;
case BarrierSet::ModRef:
break;
default :
ShouldNotReachHere();
}
}
// Copy 64 bytes chunks
//
// Inputs:
// from - source array address
// to_from - destination array address - from
// qword_count - 8-bytes element count, negative
//
void xmm_copy_forward(Register from, Register to_from, Register qword_count) {
assert( UseSSE >= 2, "supported cpu only" );
Label L_copy_64_bytes_loop, L_copy_64_bytes, L_copy_8_bytes, L_exit;
// Copy 64-byte chunks
__ jmpb(L_copy_64_bytes);
__ align(16);
__ BIND(L_copy_64_bytes_loop);
if(UseUnalignedLoadStores) {
__ movdqu(xmm0, Address(from, 0));
__ movdqu(Address(from, to_from, Address::times_1, 0), xmm0);
__ movdqu(xmm1, Address(from, 16));
__ movdqu(Address(from, to_from, Address::times_1, 16), xmm1);
__ movdqu(xmm2, Address(from, 32));
__ movdqu(Address(from, to_from, Address::times_1, 32), xmm2);
__ movdqu(xmm3, Address(from, 48));
__ movdqu(Address(from, to_from, Address::times_1, 48), xmm3);
} else {
__ movq(xmm0, Address(from, 0));
__ movq(Address(from, to_from, Address::times_1, 0), xmm0);
__ movq(xmm1, Address(from, 8));
__ movq(Address(from, to_from, Address::times_1, 8), xmm1);
__ movq(xmm2, Address(from, 16));
__ movq(Address(from, to_from, Address::times_1, 16), xmm2);
__ movq(xmm3, Address(from, 24));
__ movq(Address(from, to_from, Address::times_1, 24), xmm3);
__ movq(xmm4, Address(from, 32));
__ movq(Address(from, to_from, Address::times_1, 32), xmm4);
__ movq(xmm5, Address(from, 40));
__ movq(Address(from, to_from, Address::times_1, 40), xmm5);
__ movq(xmm6, Address(from, 48));
__ movq(Address(from, to_from, Address::times_1, 48), xmm6);
__ movq(xmm7, Address(from, 56));
__ movq(Address(from, to_from, Address::times_1, 56), xmm7);
}
__ addl(from, 64);
__ BIND(L_copy_64_bytes);
__ subl(qword_count, 8);
__ jcc(Assembler::greaterEqual, L_copy_64_bytes_loop);
__ addl(qword_count, 8);
__ jccb(Assembler::zero, L_exit);
//
// length is too short, just copy qwords
//
__ BIND(L_copy_8_bytes);
__ movq(xmm0, Address(from, 0));
__ movq(Address(from, to_from, Address::times_1), xmm0);
__ addl(from, 8);
__ decrement(qword_count);
__ jcc(Assembler::greater, L_copy_8_bytes);
__ BIND(L_exit);
}
// Copy 64 bytes chunks
//
// Inputs:
// from - source array address
// to_from - destination array address - from
// qword_count - 8-bytes element count, negative
//
void mmx_copy_forward(Register from, Register to_from, Register qword_count) {
assert( VM_Version::supports_mmx(), "supported cpu only" );
Label L_copy_64_bytes_loop, L_copy_64_bytes, L_copy_8_bytes, L_exit;
// Copy 64-byte chunks
__ jmpb(L_copy_64_bytes);
__ align(16);
__ BIND(L_copy_64_bytes_loop);
__ movq(mmx0, Address(from, 0));
__ movq(mmx1, Address(from, 8));
__ movq(mmx2, Address(from, 16));
__ movq(Address(from, to_from, Address::times_1, 0), mmx0);
__ movq(mmx3, Address(from, 24));
__ movq(Address(from, to_from, Address::times_1, 8), mmx1);
__ movq(mmx4, Address(from, 32));
__ movq(Address(from, to_from, Address::times_1, 16), mmx2);
__ movq(mmx5, Address(from, 40));
__ movq(Address(from, to_from, Address::times_1, 24), mmx3);
__ movq(mmx6, Address(from, 48));
__ movq(Address(from, to_from, Address::times_1, 32), mmx4);
__ movq(mmx7, Address(from, 56));
__ movq(Address(from, to_from, Address::times_1, 40), mmx5);
__ movq(Address(from, to_from, Address::times_1, 48), mmx6);
__ movq(Address(from, to_from, Address::times_1, 56), mmx7);
__ addptr(from, 64);
__ BIND(L_copy_64_bytes);
__ subl(qword_count, 8);
__ jcc(Assembler::greaterEqual, L_copy_64_bytes_loop);
__ addl(qword_count, 8);
__ jccb(Assembler::zero, L_exit);
//
// length is too short, just copy qwords
//
__ BIND(L_copy_8_bytes);
__ movq(mmx0, Address(from, 0));
__ movq(Address(from, to_from, Address::times_1), mmx0);
__ addptr(from, 8);
__ decrement(qword_count);
__ jcc(Assembler::greater, L_copy_8_bytes);
__ BIND(L_exit);
__ emms();
}
address generate_disjoint_copy(BasicType t, bool aligned,
Address::ScaleFactor sf,
address* entry, const char *name) {
__ align(CodeEntryAlignment);
StubCodeMark mark(this, "StubRoutines", name);
address start = __ pc();
Label L_0_count, L_exit, L_skip_align1, L_skip_align2, L_copy_byte;
Label L_copy_2_bytes, L_copy_4_bytes, L_copy_64_bytes;
int shift = Address::times_ptr - sf;
const Register from = rsi; // source array address
const Register to = rdi; // destination array address
const Register count = rcx; // elements count
const Register to_from = to; // (to - from)
const Register saved_to = rdx; // saved destination array address
__ enter(); // required for proper stackwalking of RuntimeStub frame
__ push(rsi);
__ push(rdi);
__ movptr(from , Address(rsp, 12+ 4));
__ movptr(to , Address(rsp, 12+ 8));
__ movl(count, Address(rsp, 12+ 12));
if (t == T_OBJECT) {
__ testl(count, count);
__ jcc(Assembler::zero, L_0_count);
gen_write_ref_array_pre_barrier(to, count);
__ mov(saved_to, to); // save 'to'
}
*entry = __ pc(); // Entry point from conjoint arraycopy stub.
BLOCK_COMMENT("Entry:");
__ subptr(to, from); // to --> to_from
__ cmpl(count, 2<<shift); // Short arrays (< 8 bytes) copy by element
__ jcc(Assembler::below, L_copy_4_bytes); // use unsigned cmp
if (!UseUnalignedLoadStores && !aligned && (t == T_BYTE || t == T_SHORT)) {
// align source address at 4 bytes address boundary
if (t == T_BYTE) {
// One byte misalignment happens only for byte arrays
__ testl(from, 1);
__ jccb(Assembler::zero, L_skip_align1);
__ movb(rax, Address(from, 0));
__ movb(Address(from, to_from, Address::times_1, 0), rax);
__ increment(from);
__ decrement(count);
__ BIND(L_skip_align1);
}
// Two bytes misalignment happens only for byte and short (char) arrays
__ testl(from, 2);
__ jccb(Assembler::zero, L_skip_align2);
__ movw(rax, Address(from, 0));
__ movw(Address(from, to_from, Address::times_1, 0), rax);
__ addptr(from, 2);
__ subl(count, 1<<(shift-1));
__ BIND(L_skip_align2);
}
if (!VM_Version::supports_mmx()) {
__ mov(rax, count); // save 'count'
__ shrl(count, shift); // bytes count
__ addptr(to_from, from);// restore 'to'
__ rep_mov();
__ subptr(to_from, from);// restore 'to_from'
__ mov(count, rax); // restore 'count'
__ jmpb(L_copy_2_bytes); // all dwords were copied
} else {
if (!UseUnalignedLoadStores) {
// align to 8 bytes, we know we are 4 byte aligned to start
__ testptr(from, 4);
__ jccb(Assembler::zero, L_copy_64_bytes);
__ movl(rax, Address(from, 0));
__ movl(Address(from, to_from, Address::times_1, 0), rax);
__ addptr(from, 4);
__ subl(count, 1<<shift);
}
__ BIND(L_copy_64_bytes);
__ mov(rax, count);
__ shrl(rax, shift+1); // 8 bytes chunk count
//
// Copy 8-byte chunks through MMX registers, 8 per iteration of the loop
//
if (UseXMMForArrayCopy) {
xmm_copy_forward(from, to_from, rax);
} else {
mmx_copy_forward(from, to_from, rax);
}
}
// copy tailing dword
__ BIND(L_copy_4_bytes);
__ testl(count, 1<<shift);
__ jccb(Assembler::zero, L_copy_2_bytes);
__ movl(rax, Address(from, 0));
__ movl(Address(from, to_from, Address::times_1, 0), rax);
if (t == T_BYTE || t == T_SHORT) {
__ addptr(from, 4);
__ BIND(L_copy_2_bytes);
// copy tailing word
__ testl(count, 1<<(shift-1));
__ jccb(Assembler::zero, L_copy_byte);
__ movw(rax, Address(from, 0));
__ movw(Address(from, to_from, Address::times_1, 0), rax);
if (t == T_BYTE) {
__ addptr(from, 2);
__ BIND(L_copy_byte);
// copy tailing byte
__ testl(count, 1);
__ jccb(Assembler::zero, L_exit);
__ movb(rax, Address(from, 0));
__ movb(Address(from, to_from, Address::times_1, 0), rax);
__ BIND(L_exit);
} else {
__ BIND(L_copy_byte);
}
} else {
__ BIND(L_copy_2_bytes);
}
if (t == T_OBJECT) {
__ movl(count, Address(rsp, 12+12)); // reread 'count'
__ mov(to, saved_to); // restore 'to'
gen_write_ref_array_post_barrier(to, count);
__ BIND(L_0_count);
}
inc_copy_counter_np(t);
__ pop(rdi);
__ pop(rsi);
__ leave(); // required for proper stackwalking of RuntimeStub frame
__ xorptr(rax, rax); // return 0
__ ret(0);
return start;
}
address generate_conjoint_copy(BasicType t, bool aligned,
Address::ScaleFactor sf,
address nooverlap_target,
address* entry, const char *name) {
__ align(CodeEntryAlignment);
StubCodeMark mark(this, "StubRoutines", name);
address start = __ pc();
Label L_0_count, L_exit, L_skip_align1, L_skip_align2, L_copy_byte;
Label L_copy_2_bytes, L_copy_4_bytes, L_copy_8_bytes, L_copy_8_bytes_loop;
int shift = Address::times_ptr - sf;
const Register src = rax; // source array address
const Register dst = rdx; // destination array address
const Register from = rsi; // source array address
const Register to = rdi; // destination array address
const Register count = rcx; // elements count
const Register end = rax; // array end address
__ enter(); // required for proper stackwalking of RuntimeStub frame
__ push(rsi);
__ push(rdi);
__ movptr(src , Address(rsp, 12+ 4)); // from
__ movptr(dst , Address(rsp, 12+ 8)); // to
__ movl2ptr(count, Address(rsp, 12+12)); // count
if (t == T_OBJECT) {
gen_write_ref_array_pre_barrier(dst, count);
}
if (entry != NULL) {
*entry = __ pc(); // Entry point from generic arraycopy stub.
BLOCK_COMMENT("Entry:");
}
if (t == T_OBJECT) {
__ testl(count, count);
__ jcc(Assembler::zero, L_0_count);
}
__ mov(from, src);
__ mov(to , dst);
// arrays overlap test
RuntimeAddress nooverlap(nooverlap_target);
__ cmpptr(dst, src);
__ lea(end, Address(src, count, sf, 0)); // src + count * elem_size
__ jump_cc(Assembler::belowEqual, nooverlap);
__ cmpptr(dst, end);
__ jump_cc(Assembler::aboveEqual, nooverlap);
// copy from high to low
__ cmpl(count, 2<<shift); // Short arrays (< 8 bytes) copy by element
__ jcc(Assembler::below, L_copy_4_bytes); // use unsigned cmp
if (t == T_BYTE || t == T_SHORT) {
// Align the end of destination array at 4 bytes address boundary
__ lea(end, Address(dst, count, sf, 0));
if (t == T_BYTE) {
// One byte misalignment happens only for byte arrays
__ testl(end, 1);
__ jccb(Assembler::zero, L_skip_align1);
__ decrement(count);
__ movb(rdx, Address(from, count, sf, 0));
__ movb(Address(to, count, sf, 0), rdx);
__ BIND(L_skip_align1);
}
// Two bytes misalignment happens only for byte and short (char) arrays
__ testl(end, 2);
__ jccb(Assembler::zero, L_skip_align2);
__ subptr(count, 1<<(shift-1));
__ movw(rdx, Address(from, count, sf, 0));
__ movw(Address(to, count, sf, 0), rdx);
__ BIND(L_skip_align2);
__ cmpl(count, 2<<shift); // Short arrays (< 8 bytes) copy by element
__ jcc(Assembler::below, L_copy_4_bytes);
}
if (!VM_Version::supports_mmx()) {
__ std();
__ mov(rax, count); // Save 'count'
__ mov(rdx, to); // Save 'to'
__ lea(rsi, Address(from, count, sf, -4));
__ lea(rdi, Address(to , count, sf, -4));
__ shrptr(count, shift); // bytes count
__ rep_mov();
__ cld();
__ mov(count, rax); // restore 'count'
__ andl(count, (1<<shift)-1); // mask the number of rest elements
__ movptr(from, Address(rsp, 12+4)); // reread 'from'
__ mov(to, rdx); // restore 'to'
__ jmpb(L_copy_2_bytes); // all dword were copied
} else {
// Align to 8 bytes the end of array. It is aligned to 4 bytes already.
__ testptr(end, 4);
__ jccb(Assembler::zero, L_copy_8_bytes);
__ subl(count, 1<<shift);
__ movl(rdx, Address(from, count, sf, 0));
__ movl(Address(to, count, sf, 0), rdx);
__ jmpb(L_copy_8_bytes);
__ align(16);
// Move 8 bytes
__ BIND(L_copy_8_bytes_loop);
if (UseXMMForArrayCopy) {
__ movq(xmm0, Address(from, count, sf, 0));
__ movq(Address(to, count, sf, 0), xmm0);
} else {
__ movq(mmx0, Address(from, count, sf, 0));
__ movq(Address(to, count, sf, 0), mmx0);
}
__ BIND(L_copy_8_bytes);
__ subl(count, 2<<shift);
__ jcc(Assembler::greaterEqual, L_copy_8_bytes_loop);
__ addl(count, 2<<shift);
if (!UseXMMForArrayCopy) {
__ emms();
}
}
__ BIND(L_copy_4_bytes);
// copy prefix qword
__ testl(count, 1<<shift);
__ jccb(Assembler::zero, L_copy_2_bytes);
__ movl(rdx, Address(from, count, sf, -4));
__ movl(Address(to, count, sf, -4), rdx);
if (t == T_BYTE || t == T_SHORT) {
__ subl(count, (1<<shift));
__ BIND(L_copy_2_bytes);
// copy prefix dword
__ testl(count, 1<<(shift-1));
__ jccb(Assembler::zero, L_copy_byte);
__ movw(rdx, Address(from, count, sf, -2));
__ movw(Address(to, count, sf, -2), rdx);
if (t == T_BYTE) {
__ subl(count, 1<<(shift-1));
__ BIND(L_copy_byte);
// copy prefix byte
__ testl(count, 1);
__ jccb(Assembler::zero, L_exit);
__ movb(rdx, Address(from, 0));
__ movb(Address(to, 0), rdx);
__ BIND(L_exit);
} else {
__ BIND(L_copy_byte);
}
} else {
__ BIND(L_copy_2_bytes);
}
if (t == T_OBJECT) {
__ movl2ptr(count, Address(rsp, 12+12)); // reread count
gen_write_ref_array_post_barrier(to, count);
__ BIND(L_0_count);
}
inc_copy_counter_np(t);
__ pop(rdi);
__ pop(rsi);
__ leave(); // required for proper stackwalking of RuntimeStub frame
__ xorptr(rax, rax); // return 0
__ ret(0);
return start;
}
address generate_disjoint_long_copy(address* entry, const char *name) {
__ align(CodeEntryAlignment);
StubCodeMark mark(this, "StubRoutines", name);
address start = __ pc();
Label L_copy_8_bytes, L_copy_8_bytes_loop;
const Register from = rax; // source array address
const Register to = rdx; // destination array address
const Register count = rcx; // elements count
const Register to_from = rdx; // (to - from)
__ enter(); // required for proper stackwalking of RuntimeStub frame
__ movptr(from , Address(rsp, 8+0)); // from
__ movptr(to , Address(rsp, 8+4)); // to
__ movl2ptr(count, Address(rsp, 8+8)); // count
*entry = __ pc(); // Entry point from conjoint arraycopy stub.
BLOCK_COMMENT("Entry:");
__ subptr(to, from); // to --> to_from
if (VM_Version::supports_mmx()) {
if (UseXMMForArrayCopy) {
xmm_copy_forward(from, to_from, count);
} else {
mmx_copy_forward(from, to_from, count);
}
} else {
__ jmpb(L_copy_8_bytes);
__ align(16);
__ BIND(L_copy_8_bytes_loop);
__ fild_d(Address(from, 0));
__ fistp_d(Address(from, to_from, Address::times_1));
__ addptr(from, 8);
__ BIND(L_copy_8_bytes);
__ decrement(count);
__ jcc(Assembler::greaterEqual, L_copy_8_bytes_loop);
}
inc_copy_counter_np(T_LONG);
__ leave(); // required for proper stackwalking of RuntimeStub frame
__ xorptr(rax, rax); // return 0
__ ret(0);
return start;
}
address generate_conjoint_long_copy(address nooverlap_target,
address* entry, const char *name) {
__ align(CodeEntryAlignment);
StubCodeMark mark(this, "StubRoutines", name);
address start = __ pc();
Label L_copy_8_bytes, L_copy_8_bytes_loop;
const Register from = rax; // source array address
const Register to = rdx; // destination array address
const Register count = rcx; // elements count
const Register end_from = rax; // source array end address
__ enter(); // required for proper stackwalking of RuntimeStub frame
__ movptr(from , Address(rsp, 8+0)); // from
__ movptr(to , Address(rsp, 8+4)); // to
__ movl2ptr(count, Address(rsp, 8+8)); // count
*entry = __ pc(); // Entry point from generic arraycopy stub.
BLOCK_COMMENT("Entry:");
// arrays overlap test
__ cmpptr(to, from);
RuntimeAddress nooverlap(nooverlap_target);
__ jump_cc(Assembler::belowEqual, nooverlap);
__ lea(end_from, Address(from, count, Address::times_8, 0));
__ cmpptr(to, end_from);
__ movptr(from, Address(rsp, 8)); // from
__ jump_cc(Assembler::aboveEqual, nooverlap);
__ jmpb(L_copy_8_bytes);
__ align(16);
__ BIND(L_copy_8_bytes_loop);
if (VM_Version::supports_mmx()) {
if (UseXMMForArrayCopy) {
__ movq(xmm0, Address(from, count, Address::times_8));
__ movq(Address(to, count, Address::times_8), xmm0);
} else {
__ movq(mmx0, Address(from, count, Address::times_8));
__ movq(Address(to, count, Address::times_8), mmx0);
}
} else {
__ fild_d(Address(from, count, Address::times_8));
__ fistp_d(Address(to, count, Address::times_8));
}
__ BIND(L_copy_8_bytes);
__ decrement(count);
__ jcc(Assembler::greaterEqual, L_copy_8_bytes_loop);
if (VM_Version::supports_mmx() && !UseXMMForArrayCopy) {
__ emms();
}
inc_copy_counter_np(T_LONG);
__ leave(); // required for proper stackwalking of RuntimeStub frame
__ xorptr(rax, rax); // return 0
__ ret(0);
return start;
}
// Helper for generating a dynamic type check.
// The sub_klass must be one of {rbx, rdx, rsi}.
// The temp is killed.
void generate_type_check(Register sub_klass,
Address& super_check_offset_addr,
Address& super_klass_addr,
Register temp,
Label* L_success_ptr, Label* L_failure_ptr) {
BLOCK_COMMENT("type_check:");
Label L_fallthrough;
bool fall_through_on_success = (L_success_ptr == NULL);
if (fall_through_on_success) {
L_success_ptr = &L_fallthrough;
} else {
L_failure_ptr = &L_fallthrough;
}
Label& L_success = *L_success_ptr;
Label& L_failure = *L_failure_ptr;
assert_different_registers(sub_klass, temp);
// a couple of useful fields in sub_klass:
int ss_offset = (klassOopDesc::header_size() * HeapWordSize +
Klass::secondary_supers_offset_in_bytes());
int sc_offset = (klassOopDesc::header_size() * HeapWordSize +
Klass::secondary_super_cache_offset_in_bytes());
Address secondary_supers_addr(sub_klass, ss_offset);
Address super_cache_addr( sub_klass, sc_offset);
// if the pointers are equal, we are done (e.g., String[] elements)
__ cmpptr(sub_klass, super_klass_addr);
__ jcc(Assembler::equal, L_success);
// check the supertype display:
__ movl2ptr(temp, super_check_offset_addr);
Address super_check_addr(sub_klass, temp, Address::times_1, 0);
__ movptr(temp, super_check_addr); // load displayed supertype
__ cmpptr(temp, super_klass_addr); // test the super type
__ jcc(Assembler::equal, L_success);
// if it was a primary super, we can just fail immediately
__ cmpl(super_check_offset_addr, sc_offset);
__ jcc(Assembler::notEqual, L_failure);
// Now do a linear scan of the secondary super-klass chain.
// This code is rarely used, so simplicity is a virtue here.
inc_counter_np(SharedRuntime::_partial_subtype_ctr);
{
// The repne_scan instruction uses fixed registers, which we must spill.
// (We need a couple more temps in any case.)
__ push(rax);
__ push(rcx);
__ push(rdi);
assert_different_registers(sub_klass, rax, rcx, rdi);
__ movptr(rdi, secondary_supers_addr);
// Load the array length.
__ movl(rcx, Address(rdi, arrayOopDesc::length_offset_in_bytes()));
// Skip to start of data.
__ addptr(rdi, arrayOopDesc::base_offset_in_bytes(T_OBJECT));
// Scan rcx words at [edi] for occurance of rax,
// Set NZ/Z based on last compare
__ movptr(rax, super_klass_addr);
__ repne_scan();
// Unspill the temp. registers:
__ pop(rdi);
__ pop(rcx);
__ pop(rax);
}
__ jcc(Assembler::notEqual, L_failure);
// Success. Cache the super we found and proceed in triumph.
__ movptr(temp, super_klass_addr); // note: rax, is dead
__ movptr(super_cache_addr, temp);
if (!fall_through_on_success)
__ jmp(L_success);
// Fall through on failure!
__ bind(L_fallthrough);
}
//
// Generate checkcasting array copy stub
//
// Input:
// 4(rsp) - source array address
// 8(rsp) - destination array address
// 12(rsp) - element count, can be zero
// 16(rsp) - size_t ckoff (super_check_offset)
// 20(rsp) - oop ckval (super_klass)
//
// Output:
// rax, == 0 - success
// rax, == -1^K - failure, where K is partial transfer count
//
address generate_checkcast_copy(const char *name, address* entry) {
__ align(CodeEntryAlignment);
StubCodeMark mark(this, "StubRoutines", name);
address start = __ pc();
Label L_load_element, L_store_element, L_do_card_marks, L_done;
// register use:
// rax, rdx, rcx -- loop control (end_from, end_to, count)
// rdi, rsi -- element access (oop, klass)
// rbx, -- temp
const Register from = rax; // source array address
const Register to = rdx; // destination array address
const Register length = rcx; // elements count
const Register elem = rdi; // each oop copied
const Register elem_klass = rsi; // each elem._klass (sub_klass)
const Register temp = rbx; // lone remaining temp
__ enter(); // required for proper stackwalking of RuntimeStub frame
__ push(rsi);
__ push(rdi);
__ push(rbx);
Address from_arg(rsp, 16+ 4); // from
Address to_arg(rsp, 16+ 8); // to
Address length_arg(rsp, 16+12); // elements count
Address ckoff_arg(rsp, 16+16); // super_check_offset
Address ckval_arg(rsp, 16+20); // super_klass
// Load up:
__ movptr(from, from_arg);
__ movptr(to, to_arg);
__ movl2ptr(length, length_arg);
*entry = __ pc(); // Entry point from generic arraycopy stub.
BLOCK_COMMENT("Entry:");
//---------------------------------------------------------------
// Assembler stub will be used for this call to arraycopy
// if the two arrays are subtypes of Object[] but the
// destination array type is not equal to or a supertype
// of the source type. Each element must be separately
// checked.
// Loop-invariant addresses. They are exclusive end pointers.
Address end_from_addr(from, length, Address::times_ptr, 0);
Address end_to_addr(to, length, Address::times_ptr, 0);
Register end_from = from; // re-use
Register end_to = to; // re-use
Register count = length; // re-use
// Loop-variant addresses. They assume post-incremented count < 0.
Address from_element_addr(end_from, count, Address::times_ptr, 0);
Address to_element_addr(end_to, count, Address::times_ptr, 0);
Address elem_klass_addr(elem, oopDesc::klass_offset_in_bytes());
// Copy from low to high addresses, indexed from the end of each array.
gen_write_ref_array_pre_barrier(to, count);
__ lea(end_from, end_from_addr);
__ lea(end_to, end_to_addr);
assert(length == count, ""); // else fix next line:
__ negptr(count); // negate and test the length
__ jccb(Assembler::notZero, L_load_element);
// Empty array: Nothing to do.
__ xorptr(rax, rax); // return 0 on (trivial) success
__ jmp(L_done);
// ======== begin loop ========
// (Loop is rotated; its entry is L_load_element.)
// Loop control:
// for (count = -count; count != 0; count++)
// Base pointers src, dst are biased by 8*count,to last element.
__ align(16);
__ BIND(L_store_element);
__ movptr(to_element_addr, elem); // store the oop
__ increment(count); // increment the count toward zero
__ jccb(Assembler::zero, L_do_card_marks);
// ======== loop entry is here ========
__ BIND(L_load_element);
__ movptr(elem, from_element_addr); // load the oop
__ testptr(elem, elem);
__ jccb(Assembler::zero, L_store_element);
// (Could do a trick here: Remember last successful non-null
// element stored and make a quick oop equality check on it.)
__ movptr(elem_klass, elem_klass_addr); // query the object klass
generate_type_check(elem_klass, ckoff_arg, ckval_arg, temp,
&L_store_element, NULL);
// (On fall-through, we have failed the element type check.)
// ======== end loop ========
// It was a real error; we must depend on the caller to finish the job.
// Register "count" = -1 * number of *remaining* oops, length_arg = *total* oops.
// Emit GC store barriers for the oops we have copied (length_arg + count),
// and report their number to the caller.
__ addl(count, length_arg); // transfers = (length - remaining)
__ movl2ptr(rax, count); // save the value
__ notptr(rax); // report (-1^K) to caller
__ movptr(to, to_arg); // reload
assert_different_registers(to, count, rax);
gen_write_ref_array_post_barrier(to, count);
__ jmpb(L_done);
// Come here on success only.
__ BIND(L_do_card_marks);
__ movl2ptr(count, length_arg);
__ movptr(to, to_arg); // reload
gen_write_ref_array_post_barrier(to, count);
__ xorptr(rax, rax); // return 0 on success
// Common exit point (success or failure).
__ BIND(L_done);
__ pop(rbx);
__ pop(rdi);
__ pop(rsi);
inc_counter_np(SharedRuntime::_checkcast_array_copy_ctr);
__ leave(); // required for proper stackwalking of RuntimeStub frame
__ ret(0);
return start;
}
//
// Generate 'unsafe' array copy stub
// Though just as safe as the other stubs, it takes an unscaled
// size_t argument instead of an element count.
//
// Input:
// 4(rsp) - source array address
// 8(rsp) - destination array address
// 12(rsp) - byte count, can be zero
//
// Output:
// rax, == 0 - success
// rax, == -1 - need to call System.arraycopy
//
// Examines the alignment of the operands and dispatches
// to a long, int, short, or byte copy loop.
//
address generate_unsafe_copy(const char *name,
address byte_copy_entry,
address short_copy_entry,
address int_copy_entry,
address long_copy_entry) {
Label L_long_aligned, L_int_aligned, L_short_aligned;
__ align(CodeEntryAlignment);
StubCodeMark mark(this, "StubRoutines", name);
address start = __ pc();
const Register from = rax; // source array address
const Register to = rdx; // destination array address
const Register count = rcx; // elements count
__ enter(); // required for proper stackwalking of RuntimeStub frame
__ push(rsi);
__ push(rdi);
Address from_arg(rsp, 12+ 4); // from
Address to_arg(rsp, 12+ 8); // to
Address count_arg(rsp, 12+12); // byte count
// Load up:
__ movptr(from , from_arg);
__ movptr(to , to_arg);
__ movl2ptr(count, count_arg);
// bump this on entry, not on exit:
inc_counter_np(SharedRuntime::_unsafe_array_copy_ctr);
const Register bits = rsi;
__ mov(bits, from);
__ orptr(bits, to);
__ orptr(bits, count);
__ testl(bits, BytesPerLong-1);
__ jccb(Assembler::zero, L_long_aligned);
__ testl(bits, BytesPerInt-1);
__ jccb(Assembler::zero, L_int_aligned);
__ testl(bits, BytesPerShort-1);
__ jump_cc(Assembler::notZero, RuntimeAddress(byte_copy_entry));
__ BIND(L_short_aligned);
__ shrptr(count, LogBytesPerShort); // size => short_count
__ movl(count_arg, count); // update 'count'
__ jump(RuntimeAddress(short_copy_entry));
__ BIND(L_int_aligned);
__ shrptr(count, LogBytesPerInt); // size => int_count
__ movl(count_arg, count); // update 'count'
__ jump(RuntimeAddress(int_copy_entry));
__ BIND(L_long_aligned);
__ shrptr(count, LogBytesPerLong); // size => qword_count
__ movl(count_arg, count); // update 'count'
__ pop(rdi); // Do pops here since jlong_arraycopy stub does not do it.
__ pop(rsi);
__ jump(RuntimeAddress(long_copy_entry));
return start;
}
// Perform range checks on the proposed arraycopy.
// Smashes src_pos and dst_pos. (Uses them up for temps.)
void arraycopy_range_checks(Register src,
Register src_pos,
Register dst,
Register dst_pos,
Address& length,
Label& L_failed) {
BLOCK_COMMENT("arraycopy_range_checks:");
const Register src_end = src_pos; // source array end position
const Register dst_end = dst_pos; // destination array end position
__ addl(src_end, length); // src_pos + length
__ addl(dst_end, length); // dst_pos + length
// if (src_pos + length > arrayOop(src)->length() ) FAIL;
__ cmpl(src_end, Address(src, arrayOopDesc::length_offset_in_bytes()));
__ jcc(Assembler::above, L_failed);
// if (dst_pos + length > arrayOop(dst)->length() ) FAIL;
__ cmpl(dst_end, Address(dst, arrayOopDesc::length_offset_in_bytes()));
__ jcc(Assembler::above, L_failed);
BLOCK_COMMENT("arraycopy_range_checks done");
}
//
// Generate generic array copy stubs
//
// Input:
// 4(rsp) - src oop
// 8(rsp) - src_pos
// 12(rsp) - dst oop
// 16(rsp) - dst_pos
// 20(rsp) - element count
//
// Output:
// rax, == 0 - success
// rax, == -1^K - failure, where K is partial transfer count
//
address generate_generic_copy(const char *name,
address entry_jbyte_arraycopy,
address entry_jshort_arraycopy,
address entry_jint_arraycopy,
address entry_oop_arraycopy,
address entry_jlong_arraycopy,
address entry_checkcast_arraycopy) {
Label L_failed, L_failed_0, L_objArray;
{ int modulus = CodeEntryAlignment;
int target = modulus - 5; // 5 = sizeof jmp(L_failed)
int advance = target - (__ offset() % modulus);
if (advance < 0) advance += modulus;
if (advance > 0) __ nop(advance);
}
StubCodeMark mark(this, "StubRoutines", name);
// Short-hop target to L_failed. Makes for denser prologue code.
__ BIND(L_failed_0);
__ jmp(L_failed);
assert(__ offset() % CodeEntryAlignment == 0, "no further alignment needed");
__ align(CodeEntryAlignment);
address start = __ pc();
__ enter(); // required for proper stackwalking of RuntimeStub frame
__ push(rsi);
__ push(rdi);
// bump this on entry, not on exit:
inc_counter_np(SharedRuntime::_generic_array_copy_ctr);
// Input values
Address SRC (rsp, 12+ 4);
Address SRC_POS (rsp, 12+ 8);
Address DST (rsp, 12+12);
Address DST_POS (rsp, 12+16);
Address LENGTH (rsp, 12+20);
//-----------------------------------------------------------------------
// Assembler stub will be used for this call to arraycopy
// if the following conditions are met:
//
// (1) src and dst must not be null.
// (2) src_pos must not be negative.
// (3) dst_pos must not be negative.
// (4) length must not be negative.
// (5) src klass and dst klass should be the same and not NULL.
// (6) src and dst should be arrays.
// (7) src_pos + length must not exceed length of src.
// (8) dst_pos + length must not exceed length of dst.
//
const Register src = rax; // source array oop
const Register src_pos = rsi;
const Register dst = rdx; // destination array oop
const Register dst_pos = rdi;
const Register length = rcx; // transfer count
// if (src == NULL) return -1;
__ movptr(src, SRC); // src oop
__ testptr(src, src);
__ jccb(Assembler::zero, L_failed_0);
// if (src_pos < 0) return -1;
__ movl2ptr(src_pos, SRC_POS); // src_pos
__ testl(src_pos, src_pos);
__ jccb(Assembler::negative, L_failed_0);
// if (dst == NULL) return -1;
__ movptr(dst, DST); // dst oop
__ testptr(dst, dst);
__ jccb(Assembler::zero, L_failed_0);
// if (dst_pos < 0) return -1;
__ movl2ptr(dst_pos, DST_POS); // dst_pos
__ testl(dst_pos, dst_pos);
__ jccb(Assembler::negative, L_failed_0);
// if (length < 0) return -1;
__ movl2ptr(length, LENGTH); // length
__ testl(length, length);
__ jccb(Assembler::negative, L_failed_0);
// if (src->klass() == NULL) return -1;
Address src_klass_addr(src, oopDesc::klass_offset_in_bytes());
Address dst_klass_addr(dst, oopDesc::klass_offset_in_bytes());
const Register rcx_src_klass = rcx; // array klass
__ movptr(rcx_src_klass, Address(src, oopDesc::klass_offset_in_bytes()));
#ifdef ASSERT
// assert(src->klass() != NULL);
BLOCK_COMMENT("assert klasses not null");
{ Label L1, L2;
__ testptr(rcx_src_klass, rcx_src_klass);
__ jccb(Assembler::notZero, L2); // it is broken if klass is NULL
__ bind(L1);
__ stop("broken null klass");
__ bind(L2);
__ cmpptr(dst_klass_addr, (int32_t)NULL_WORD);
__ jccb(Assembler::equal, L1); // this would be broken also
BLOCK_COMMENT("assert done");
}
#endif //ASSERT
// Load layout helper (32-bits)
//
// |array_tag| | header_size | element_type | |log2_element_size|
// 32 30 24 16 8 2 0
//
// array_tag: typeArray = 0x3, objArray = 0x2, non-array = 0x0
//
int lh_offset = klassOopDesc::header_size() * HeapWordSize +
Klass::layout_helper_offset_in_bytes();
Address src_klass_lh_addr(rcx_src_klass, lh_offset);
// Handle objArrays completely differently...
jint objArray_lh = Klass::array_layout_helper(T_OBJECT);
__ cmpl(src_klass_lh_addr, objArray_lh);
__ jcc(Assembler::equal, L_objArray);
// if (src->klass() != dst->klass()) return -1;
__ cmpptr(rcx_src_klass, dst_klass_addr);
__ jccb(Assembler::notEqual, L_failed_0);
const Register rcx_lh = rcx; // layout helper
assert(rcx_lh == rcx_src_klass, "known alias");
__ movl(rcx_lh, src_klass_lh_addr);
// if (!src->is_Array()) return -1;
__ cmpl(rcx_lh, Klass::_lh_neutral_value);
__ jcc(Assembler::greaterEqual, L_failed_0); // signed cmp
// At this point, it is known to be a typeArray (array_tag 0x3).
#ifdef ASSERT
{ Label L;
__ cmpl(rcx_lh, (Klass::_lh_array_tag_type_value << Klass::_lh_array_tag_shift));
__ jcc(Assembler::greaterEqual, L); // signed cmp
__ stop("must be a primitive array");
__ bind(L);
}
#endif
assert_different_registers(src, src_pos, dst, dst_pos, rcx_lh);
arraycopy_range_checks(src, src_pos, dst, dst_pos, LENGTH, L_failed);
// typeArrayKlass
//
// src_addr = (src + array_header_in_bytes()) + (src_pos << log2elemsize);
// dst_addr = (dst + array_header_in_bytes()) + (dst_pos << log2elemsize);
//
const Register rsi_offset = rsi; // array offset
const Register src_array = src; // src array offset
const Register dst_array = dst; // dst array offset
const Register rdi_elsize = rdi; // log2 element size
__ mov(rsi_offset, rcx_lh);
__ shrptr(rsi_offset, Klass::_lh_header_size_shift);
__ andptr(rsi_offset, Klass::_lh_header_size_mask); // array_offset
__ addptr(src_array, rsi_offset); // src array offset
__ addptr(dst_array, rsi_offset); // dst array offset
__ andptr(rcx_lh, Klass::_lh_log2_element_size_mask); // log2 elsize
// next registers should be set before the jump to corresponding stub
const Register from = src; // source array address
const Register to = dst; // destination array address
const Register count = rcx; // elements count
// some of them should be duplicated on stack
#define FROM Address(rsp, 12+ 4)
#define TO Address(rsp, 12+ 8) // Not used now
#define COUNT Address(rsp, 12+12) // Only for oop arraycopy
BLOCK_COMMENT("scale indexes to element size");
__ movl2ptr(rsi, SRC_POS); // src_pos
__ shlptr(rsi); // src_pos << rcx (log2 elsize)
assert(src_array == from, "");
__ addptr(from, rsi); // from = src_array + SRC_POS << log2 elsize
__ movl2ptr(rdi, DST_POS); // dst_pos
__ shlptr(rdi); // dst_pos << rcx (log2 elsize)
assert(dst_array == to, "");
__ addptr(to, rdi); // to = dst_array + DST_POS << log2 elsize
__ movptr(FROM, from); // src_addr
__ mov(rdi_elsize, rcx_lh); // log2 elsize
__ movl2ptr(count, LENGTH); // elements count
BLOCK_COMMENT("choose copy loop based on element size");
__ cmpl(rdi_elsize, 0);
__ jump_cc(Assembler::equal, RuntimeAddress(entry_jbyte_arraycopy));
__ cmpl(rdi_elsize, LogBytesPerShort);
__ jump_cc(Assembler::equal, RuntimeAddress(entry_jshort_arraycopy));
__ cmpl(rdi_elsize, LogBytesPerInt);
__ jump_cc(Assembler::equal, RuntimeAddress(entry_jint_arraycopy));
#ifdef ASSERT
__ cmpl(rdi_elsize, LogBytesPerLong);
__ jccb(Assembler::notEqual, L_failed);
#endif
__ pop(rdi); // Do pops here since jlong_arraycopy stub does not do it.
__ pop(rsi);
__ jump(RuntimeAddress(entry_jlong_arraycopy));
__ BIND(L_failed);
__ xorptr(rax, rax);
__ notptr(rax); // return -1
__ pop(rdi);
__ pop(rsi);
__ leave(); // required for proper stackwalking of RuntimeStub frame
__ ret(0);
// objArrayKlass
__ BIND(L_objArray);
// live at this point: rcx_src_klass, src[_pos], dst[_pos]
Label L_plain_copy, L_checkcast_copy;
// test array classes for subtyping
__ cmpptr(rcx_src_klass, dst_klass_addr); // usual case is exact equality
__ jccb(Assembler::notEqual, L_checkcast_copy);
// Identically typed arrays can be copied without element-wise checks.
assert_different_registers(src, src_pos, dst, dst_pos, rcx_src_klass);
arraycopy_range_checks(src, src_pos, dst, dst_pos, LENGTH, L_failed);
__ BIND(L_plain_copy);
__ movl2ptr(count, LENGTH); // elements count
__ movl2ptr(src_pos, SRC_POS); // reload src_pos
__ lea(from, Address(src, src_pos, Address::times_ptr,
arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // src_addr
__ movl2ptr(dst_pos, DST_POS); // reload dst_pos
__ lea(to, Address(dst, dst_pos, Address::times_ptr,
arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // dst_addr
__ movptr(FROM, from); // src_addr
__ movptr(TO, to); // dst_addr
__ movl(COUNT, count); // count
__ jump(RuntimeAddress(entry_oop_arraycopy));
__ BIND(L_checkcast_copy);
// live at this point: rcx_src_klass, dst[_pos], src[_pos]
{
// Handy offsets:
int ek_offset = (klassOopDesc::header_size() * HeapWordSize +
objArrayKlass::element_klass_offset_in_bytes());
int sco_offset = (klassOopDesc::header_size() * HeapWordSize +
Klass::super_check_offset_offset_in_bytes());
Register rsi_dst_klass = rsi;
Register rdi_temp = rdi;
assert(rsi_dst_klass == src_pos, "expected alias w/ src_pos");
assert(rdi_temp == dst_pos, "expected alias w/ dst_pos");
Address dst_klass_lh_addr(rsi_dst_klass, lh_offset);
// Before looking at dst.length, make sure dst is also an objArray.
__ movptr(rsi_dst_klass, dst_klass_addr);
__ cmpl(dst_klass_lh_addr, objArray_lh);
__ jccb(Assembler::notEqual, L_failed);
// It is safe to examine both src.length and dst.length.
__ movl2ptr(src_pos, SRC_POS); // reload rsi
arraycopy_range_checks(src, src_pos, dst, dst_pos, LENGTH, L_failed);
// (Now src_pos and dst_pos are killed, but not src and dst.)
// We'll need this temp (don't forget to pop it after the type check).
__ push(rbx);
Register rbx_src_klass = rbx;
__ mov(rbx_src_klass, rcx_src_klass); // spill away from rcx
__ movptr(rsi_dst_klass, dst_klass_addr);
Address super_check_offset_addr(rsi_dst_klass, sco_offset);
Label L_fail_array_check;
generate_type_check(rbx_src_klass,
super_check_offset_addr, dst_klass_addr,
rdi_temp, NULL, &L_fail_array_check);
// (On fall-through, we have passed the array type check.)
__ pop(rbx);
__ jmp(L_plain_copy);
__ BIND(L_fail_array_check);
// Reshuffle arguments so we can call checkcast_arraycopy:
// match initial saves for checkcast_arraycopy
// push(rsi); // already done; see above
// push(rdi); // already done; see above
// push(rbx); // already done; see above
// Marshal outgoing arguments now, freeing registers.
Address from_arg(rsp, 16+ 4); // from
Address to_arg(rsp, 16+ 8); // to
Address length_arg(rsp, 16+12); // elements count
Address ckoff_arg(rsp, 16+16); // super_check_offset
Address ckval_arg(rsp, 16+20); // super_klass
Address SRC_POS_arg(rsp, 16+ 8);
Address DST_POS_arg(rsp, 16+16);
Address LENGTH_arg(rsp, 16+20);
// push rbx, changed the incoming offsets (why not just use rbp,??)
// assert(SRC_POS_arg.disp() == SRC_POS.disp() + 4, "");
__ movptr(rbx, Address(rsi_dst_klass, ek_offset));
__ movl2ptr(length, LENGTH_arg); // reload elements count
__ movl2ptr(src_pos, SRC_POS_arg); // reload src_pos
__ movl2ptr(dst_pos, DST_POS_arg); // reload dst_pos
__ movptr(ckval_arg, rbx); // destination element type
__ movl(rbx, Address(rbx, sco_offset));
__ movl(ckoff_arg, rbx); // corresponding class check offset
__ movl(length_arg, length); // outgoing length argument
__ lea(from, Address(src, src_pos, Address::times_ptr,
arrayOopDesc::base_offset_in_bytes(T_OBJECT)));
__ movptr(from_arg, from);
__ lea(to, Address(dst, dst_pos, Address::times_ptr,
arrayOopDesc::base_offset_in_bytes(T_OBJECT)));
__ movptr(to_arg, to);
__ jump(RuntimeAddress(entry_checkcast_arraycopy));
}
return start;
}
void generate_arraycopy_stubs() {
address entry;
address entry_jbyte_arraycopy;
address entry_jshort_arraycopy;
address entry_jint_arraycopy;
address entry_oop_arraycopy;
address entry_jlong_arraycopy;
address entry_checkcast_arraycopy;
StubRoutines::_arrayof_jbyte_disjoint_arraycopy =
generate_disjoint_copy(T_BYTE, true, Address::times_1, &entry,
"arrayof_jbyte_disjoint_arraycopy");
StubRoutines::_arrayof_jbyte_arraycopy =
generate_conjoint_copy(T_BYTE, true, Address::times_1, entry,
NULL, "arrayof_jbyte_arraycopy");
StubRoutines::_jbyte_disjoint_arraycopy =
generate_disjoint_copy(T_BYTE, false, Address::times_1, &entry,
"jbyte_disjoint_arraycopy");
StubRoutines::_jbyte_arraycopy =
generate_conjoint_copy(T_BYTE, false, Address::times_1, entry,
&entry_jbyte_arraycopy, "jbyte_arraycopy");
StubRoutines::_arrayof_jshort_disjoint_arraycopy =
generate_disjoint_copy(T_SHORT, true, Address::times_2, &entry,
"arrayof_jshort_disjoint_arraycopy");
StubRoutines::_arrayof_jshort_arraycopy =
generate_conjoint_copy(T_SHORT, true, Address::times_2, entry,
NULL, "arrayof_jshort_arraycopy");
StubRoutines::_jshort_disjoint_arraycopy =
generate_disjoint_copy(T_SHORT, false, Address::times_2, &entry,
"jshort_disjoint_arraycopy");
StubRoutines::_jshort_arraycopy =
generate_conjoint_copy(T_SHORT, false, Address::times_2, entry,
&entry_jshort_arraycopy, "jshort_arraycopy");
// Next arrays are always aligned on 4 bytes at least.
StubRoutines::_jint_disjoint_arraycopy =
generate_disjoint_copy(T_INT, true, Address::times_4, &entry,
"jint_disjoint_arraycopy");
StubRoutines::_jint_arraycopy =
generate_conjoint_copy(T_INT, true, Address::times_4, entry,
&entry_jint_arraycopy, "jint_arraycopy");
StubRoutines::_oop_disjoint_arraycopy =
generate_disjoint_copy(T_OBJECT, true, Address::times_ptr, &entry,
"oop_disjoint_arraycopy");
StubRoutines::_oop_arraycopy =
generate_conjoint_copy(T_OBJECT, true, Address::times_ptr, entry,
&entry_oop_arraycopy, "oop_arraycopy");
StubRoutines::_jlong_disjoint_arraycopy =
generate_disjoint_long_copy(&entry, "jlong_disjoint_arraycopy");
StubRoutines::_jlong_arraycopy =
generate_conjoint_long_copy(entry, &entry_jlong_arraycopy,
"jlong_arraycopy");
StubRoutines::_arrayof_jint_disjoint_arraycopy =
StubRoutines::_jint_disjoint_arraycopy;
StubRoutines::_arrayof_oop_disjoint_arraycopy =
StubRoutines::_oop_disjoint_arraycopy;
StubRoutines::_arrayof_jlong_disjoint_arraycopy =
StubRoutines::_jlong_disjoint_arraycopy;
StubRoutines::_arrayof_jint_arraycopy = StubRoutines::_jint_arraycopy;
StubRoutines::_arrayof_oop_arraycopy = StubRoutines::_oop_arraycopy;
StubRoutines::_arrayof_jlong_arraycopy = StubRoutines::_jlong_arraycopy;
StubRoutines::_checkcast_arraycopy =
generate_checkcast_copy("checkcast_arraycopy",
&entry_checkcast_arraycopy);
StubRoutines::_unsafe_arraycopy =
generate_unsafe_copy("unsafe_arraycopy",
entry_jbyte_arraycopy,
entry_jshort_arraycopy,
entry_jint_arraycopy,
entry_jlong_arraycopy);
StubRoutines::_generic_arraycopy =
generate_generic_copy("generic_arraycopy",
entry_jbyte_arraycopy,
entry_jshort_arraycopy,
entry_jint_arraycopy,
entry_oop_arraycopy,
entry_jlong_arraycopy,
entry_checkcast_arraycopy);
}
public:
// Information about frame layout at time of blocking runtime call.
// Note that we only have to preserve callee-saved registers since
// the compilers are responsible for supplying a continuation point
// if they expect all registers to be preserved.
enum layout {
thread_off, // last_java_sp
rbp_off, // callee saved register
ret_pc,
framesize
};
private:
#undef __
#define __ masm->
//------------------------------------------------------------------------------------------------------------------------
// Continuation point for throwing of implicit exceptions that are not handled in
// the current activation. Fabricates an exception oop and initiates normal
// exception dispatching in this frame.
//
// Previously the compiler (c2) allowed for callee save registers on Java calls.
// This is no longer true after adapter frames were removed but could possibly
// be brought back in the future if the interpreter code was reworked and it
// was deemed worthwhile. The comment below was left to describe what must
// happen here if callee saves were resurrected. As it stands now this stub
// could actually be a vanilla BufferBlob and have now oopMap at all.
// Since it doesn't make much difference we've chosen to leave it the
// way it was in the callee save days and keep the comment.
// If we need to preserve callee-saved values we need a callee-saved oop map and
// therefore have to make these stubs into RuntimeStubs rather than BufferBlobs.
// If the compiler needs all registers to be preserved between the fault
// point and the exception handler then it must assume responsibility for that in
// AbstractCompiler::continuation_for_implicit_null_exception or
// continuation_for_implicit_division_by_zero_exception. All other implicit
// exceptions (e.g., NullPointerException or AbstractMethodError on entry) are
// either at call sites or otherwise assume that stack unwinding will be initiated,
// so caller saved registers were assumed volatile in the compiler.
address generate_throw_exception(const char* name, address runtime_entry,
bool restore_saved_exception_pc) {
int insts_size = 256;
int locs_size = 32;
CodeBuffer code(name, insts_size, locs_size);
OopMapSet* oop_maps = new OopMapSet();
MacroAssembler* masm = new MacroAssembler(&code);
address start = __ pc();
// This is an inlined and slightly modified version of call_VM
// which has the ability to fetch the return PC out of
// thread-local storage and also sets up last_Java_sp slightly
// differently than the real call_VM
Register java_thread = rbx;
__ get_thread(java_thread);
if (restore_saved_exception_pc) {
__ movptr(rax, Address(java_thread, in_bytes(JavaThread::saved_exception_pc_offset())));
__ push(rax);
}
__ enter(); // required for proper stackwalking of RuntimeStub frame
// pc and rbp, already pushed
__ subptr(rsp, (framesize-2) * wordSize); // prolog
// Frame is now completed as far as size and linkage.
int frame_complete = __ pc() - start;
// push java thread (becomes first argument of C function)
__ movptr(Address(rsp, thread_off * wordSize), java_thread);
// Set up last_Java_sp and last_Java_fp
__ set_last_Java_frame(java_thread, rsp, rbp, NULL);
// Call runtime
BLOCK_COMMENT("call runtime_entry");
__ call(RuntimeAddress(runtime_entry));
// Generate oop map
OopMap* map = new OopMap(framesize, 0);
oop_maps->add_gc_map(__ pc() - start, map);
// restore the thread (cannot use the pushed argument since arguments
// may be overwritten by C code generated by an optimizing compiler);
// however can use the register value directly if it is callee saved.
__ get_thread(java_thread);
__ reset_last_Java_frame(java_thread, true, false);
__ leave(); // required for proper stackwalking of RuntimeStub frame
// check for pending exceptions
#ifdef ASSERT
Label L;
__ cmpptr(Address(java_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
__ jcc(Assembler::notEqual, L);
__ should_not_reach_here();
__ bind(L);
#endif /* ASSERT */
__ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
RuntimeStub* stub = RuntimeStub::new_runtime_stub(name, &code, frame_complete, framesize, oop_maps, false);
return stub->entry_point();
}
void create_control_words() {
// Round to nearest, 53-bit mode, exceptions masked
StubRoutines::_fpu_cntrl_wrd_std = 0x027F;
// Round to zero, 53-bit mode, exception mased
StubRoutines::_fpu_cntrl_wrd_trunc = 0x0D7F;
// Round to nearest, 24-bit mode, exceptions masked
StubRoutines::_fpu_cntrl_wrd_24 = 0x007F;
// Round to nearest, 64-bit mode, exceptions masked
StubRoutines::_fpu_cntrl_wrd_64 = 0x037F;
// Round to nearest, 64-bit mode, exceptions masked
StubRoutines::_mxcsr_std = 0x1F80;
// Note: the following two constants are 80-bit values
// layout is critical for correct loading by FPU.
// Bias for strict fp multiply/divide
StubRoutines::_fpu_subnormal_bias1[0]= 0x00000000; // 2^(-15360) == 0x03ff 8000 0000 0000 0000
StubRoutines::_fpu_subnormal_bias1[1]= 0x80000000;
StubRoutines::_fpu_subnormal_bias1[2]= 0x03ff;
// Un-Bias for strict fp multiply/divide
StubRoutines::_fpu_subnormal_bias2[0]= 0x00000000; // 2^(+15360) == 0x7bff 8000 0000 0000 0000
StubRoutines::_fpu_subnormal_bias2[1]= 0x80000000;
StubRoutines::_fpu_subnormal_bias2[2]= 0x7bff;
}
//---------------------------------------------------------------------------
// Initialization
void generate_initial() {
// Generates all stubs and initializes the entry points
//------------------------------------------------------------------------------------------------------------------------
// entry points that exist in all platforms
// Note: This is code that could be shared among different platforms - however the benefit seems to be smaller than
// the disadvantage of having a much more complicated generator structure. See also comment in stubRoutines.hpp.
StubRoutines::_forward_exception_entry = generate_forward_exception();
StubRoutines::_call_stub_entry =
generate_call_stub(StubRoutines::_call_stub_return_address);
// is referenced by megamorphic call
StubRoutines::_catch_exception_entry = generate_catch_exception();
// These are currently used by Solaris/Intel
StubRoutines::_atomic_xchg_entry = generate_atomic_xchg();
StubRoutines::_handler_for_unsafe_access_entry =
generate_handler_for_unsafe_access();
// platform dependent
create_control_words();
StubRoutines::x86::_verify_mxcsr_entry = generate_verify_mxcsr();
StubRoutines::x86::_verify_fpu_cntrl_wrd_entry = generate_verify_fpu_cntrl_wrd();
StubRoutines::_d2i_wrapper = generate_d2i_wrapper(T_INT,
CAST_FROM_FN_PTR(address, SharedRuntime::d2i));
StubRoutines::_d2l_wrapper = generate_d2i_wrapper(T_LONG,
CAST_FROM_FN_PTR(address, SharedRuntime::d2l));
}
void generate_all() {
// Generates all stubs and initializes the entry points
// These entry points require SharedInfo::stack0 to be set up in non-core builds
// and need to be relocatable, so they each fabricate a RuntimeStub internally.
StubRoutines::_throw_AbstractMethodError_entry = generate_throw_exception("AbstractMethodError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_AbstractMethodError), false);
StubRoutines::_throw_IncompatibleClassChangeError_entry= generate_throw_exception("IncompatibleClassChangeError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_IncompatibleClassChangeError), false);
StubRoutines::_throw_ArithmeticException_entry = generate_throw_exception("ArithmeticException throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_ArithmeticException), true);
StubRoutines::_throw_NullPointerException_entry = generate_throw_exception("NullPointerException throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_NullPointerException), true);
StubRoutines::_throw_NullPointerException_at_call_entry= generate_throw_exception("NullPointerException at call throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_NullPointerException_at_call), false);
StubRoutines::_throw_StackOverflowError_entry = generate_throw_exception("StackOverflowError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_StackOverflowError), false);
//------------------------------------------------------------------------------------------------------------------------
// entry points that are platform specific
// support for verify_oop (must happen after universe_init)
StubRoutines::_verify_oop_subroutine_entry = generate_verify_oop();
// arraycopy stubs used by compilers
generate_arraycopy_stubs();
}
public:
StubGenerator(CodeBuffer* code, bool all) : StubCodeGenerator(code) {
if (all) {
generate_all();
} else {
generate_initial();
}
}
}; // end class declaration
void StubGenerator_generate(CodeBuffer* code, bool all) {
StubGenerator g(code, all);
}