/*
* Copyright (c) 2000, 2003, Oracle and/or its affiliates. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation. Oracle designates this
* particular file as subject to the "Classpath" exception as provided
* by Oracle in the LICENSE file that accompanied this code.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
/*
* Differences from original:
*
* - do not include orb.idl
* - include IOP.idl, Messaging.idl and CORBAX.idl
* - renamed component parameter names to tagged_component (so that they
* do not conflict with the CORBA 3.0 "component" keyword).
* - javadocs added (synchronized with orbos/00-08-06)
*
* NOTE: After compilation of this IDL file, all Helper and Holder classes
* that are not needed are removed.
*/
#include "IOP.idl"
#include "Messaging.idl"
#include "CORBAX.idl"
#include "corba.idl"
#pragma prefix "omg.org"
#ifndef CORBA3
#define local
#endif
module Dynamic {
/**
* <code>NVList</code> PIDL represented by <code>ParameterList</code> IDL.
* This exists in order to keep the Portable Interceptor IDL from becoming
* PIDL.
*/
struct Parameter {
any argument;
CORBA::ParameterMode mode;
};
/**
* <code>NVList</code> PIDL represented by <code>ParameterList</code> IDL.
* This exists in order to keep the Portable Interceptor IDL from becoming
* PIDL.
*/
typedef sequence<Parameter> ParameterList;
/**
* <code>ContextList</code> PIDL represented by <code>ContextList</code>
* IDL. This exists in order to keep the Portable Interceptor IDL from
* becoming PIDL.
*/
typedef CORBA::StringSeq ContextList;
/**
* <code>ExceptionList</code> PIDL represented by <code>ExceptionList</code>
* IDL. This exists in order to keep the Portable Interceptor IDL from
* becoming PIDL.
*/
typedef sequence<CORBA::TypeCode> ExceptionList;
/**
* <code>Context</code> PIDL represented by <code>RequestContext</code>
* IDL. This exists in order to keep the Portable Interceptor IDL from o
* becoming PIDL.
* <p>
* <code>Context</code> objects are encoded as <code>String[]</code>. The
* <code>Strings</code> occur in pairs. The first <code>String</code> in
* each pair is the context property name and the second <code>String</code>
* in each pair is the associated value.
*/
typedef CORBA::StringSeq RequestContext;
};
module PortableInterceptor {
/**
* All Portable Interceptors implement Interceptor.
*/
local interface Interceptor {
/**
* Returns the name of the interceptor.
* <p>
* Each Interceptor may have a name that may be used administratively
* to order the lists of Interceptors. Only one Interceptor of a given
* name can be registered with the ORB for each Interceptor type. An
* Interceptor may be anonymous, i.e., have an empty string as the name
* attribute. Any number of anonymous Interceptors may be registered with
* the ORB.
*
* @return the name of the interceptor.
*/
readonly attribute string name;
// Added in ptc/00-08-06
/**
* Provides an opportunity to destroy this interceptor.
* The destroy method is called during <code>ORB.destroy</code>. When an
* application calls <code>ORB.destroy</code>, the ORB:
* <ol>
* <li>waits for all requests in progress to complete</li>
* <li>calls the <code>Interceptor.destroy</code> operation for each
* interceptor</li>
* <li>completes destruction of the ORB</li>
* </ol>
* Method invocations from within <code>Interceptor.destroy</code> on
* object references for objects implemented on the ORB being destroyed
* result in undefined behavior. However, method invocations on objects
* implemented on an ORB other than the one being destroyed are
* permitted. (This means that the ORB being destroyed is still capable
* of acting as a client, but not as a server.)
*/
void destroy();
};
/**
* The <code>ForwardRequest</code> exception is the means by which an
* Interceptor can indicate to the ORB that a retry of the request should
* occur with the new object given in the exception. This behavior of
* causing a retry only occurs if the ORB receives a ForwardRequest from
* an interceptor. If <code>ForwardRequest</code> is thrown anywhere else
* it is passed through the ORB as is normal for a user exception.
* <p>
* If an Interceptor throws a <code>ForwardRequest</code> exception in
* response to a call of an interceptor, no other Interceptors are called
* for that interception point. The remaining Interceptors in the Flow Stack
* shall have their appropriate ending interception point called:
* <code>receive_other</code> on the client, or <code>send_other</code> on
* the server. The <code>reply_status</code> in the
* <code>receive_other</code> or <code>send_other</code> would be
* <code>LOCATION_FORWARD</code>.
*/
exception ForwardRequest {
/**
* The new object to forward the request to.
*/
Object forward;
// Change in ptc/00-08-06
// boolean permanent;
};
/** Reply status, represented as an int */
typedef short ReplyStatus;
// Valid reply_status values:
/**
* Indicates a successful Reply Status. One possible value for
* <code>RequestInfo.reply_status</code>.
* @see RequestInfo#reply_status
* @see SYSTEM_EXCEPTION
* @see USER_EXCEPTION
* @see LOCATION_FORWARD
* @see TRANSPORT_RETRY
*/
const ReplyStatus SUCCESSFUL = 0;
/**
* Indicates a SystemException reply status. One possible value for
* <code>RequestInfo.reply_status</code>.
* @see RequestInfo#reply_status
* @see SUCCESSFUL
* @see USER_EXCEPTION
* @see LOCATION_FORWARD
* @see TRANSPORT_RETRY
*/
const ReplyStatus SYSTEM_EXCEPTION = 1;
/**
* Indicates a UserException reply status. One possible value for
* <code>RequestInfo.reply_status</code>.
* @see RequestInfo#reply_status
* @see SUCCESSFUL
* @see SYSTEM_EXCEPTION
* @see LOCATION_FORWARD
* @see TRANSPORT_RETRY
*/
const ReplyStatus USER_EXCEPTION = 2;
/**
* Indicates a LocationForward reply status. One possible value for
* <code>RequestInfo.reply_status</code>.
* @see RequestInfo#reply_status
* @see SUCCESSFUL
* @see SYSTEM_EXCEPTION
* @see USER_EXCEPTION
* @see TRANSPORT_RETRY
*/
const ReplyStatus LOCATION_FORWARD = 3;
// Changes in ptc/00-08-06
// const ReplyStatus LOCATION_FORWARD_PERMANENT = 4;
/**
* Indicates a Transport Retry reply status. One possible value for
* <code>RequestInfo.reply_status</code>.
* @see RequestInfo#reply_status
* @see SUCCESSFUL
* @see SYSTEM_EXCEPTION
* @see USER_EXCEPTION
* @see LOCATION_FORWARD
*/
const ReplyStatus TRANSPORT_RETRY = 4;
/**
* XXX
*/
const ReplyStatus UNKNOWN = 5;
/** Slot id, represented as an int */
typedef unsigned long SlotId;
/**
* This exception is thrown when <code>get_slot</code> or
* <code>set_slot</code> is called on a slot that has not been allocated.
*/
exception InvalidSlot {};
/**
* Portable Interceptors Current (also known as <code>PICurrent</code>)
* is merely a slot table, the slots of which are used by each service to
* transfer their context data between their context and the request's or
* reply's service context. Each service which wishes to use PICurrent
* reserves a slot or slots at initialization time and uses those slots
* during the processing of requests and replies.
* <p>
* Before an invocation is made, PICurrent is obtained via a call to
* <code>ORB.resolve_initial_references( "PICurrent" )</code>. From within
* the interception points, the data on PICurrent that has moved from the
* thread scope to the request scope is available via the
* <code>get_slot</code> operation on the <code>RequestInfo</code> object.
* A PICurrent can still be obtained via
* <code>resolve_initial_references</code>, but that is the Interceptor's
* thread scope PICurrent.
*/
local interface Current : CORBA::Current {
/**
* Retrieves the slot data the application set in PICurrent via
* <code>get_slot</code>. The data is in the form of an Any.
* <p>
* If the given slot has not been set, an Any containing a type code
* with a <code>TCKind</code> value of <code>tk_null</code> and no value
* is returned.
*
* @param id The <code>SlotId</code> of the slot from which the data will
* be returned.
* @return The data, in the form of an Any, of the given slot identifier.
* @exception InvalidSlot thrown if get_slot is called on a slot that
* has not been allocated.
* @exception BAD_INV_ORDER thrown if <code>get_slot</code> is called
* from within an ORB initializer
*/
any get_slot (in SlotId id) raises (InvalidSlot);
/**
* Sets data in a slot. The data is in the form of an Any. If data
* already exists in that slot, it is overridden.
*
* @param id The <code>SlotId</code> of the slot to which the data will
* be set.
* @param data The data, in the form of an Any, which will be set
* to the identified slot.
* @exception InvalidSlot thrown if <code>set_slot</code> is called on
* a slot that has not been allocated.
* @exception BAD_INV_ORDER thrown if <code>set_slot</code> is called
* from within an ORB initializer.
*/
void set_slot (in SlotId id, in any data) raises (InvalidSlot);
};
/**
* Request Information, accessible to Interceptors.
* <p>
* Each interception point is given an object through which the
* Interceptor can access request information. Client-side and server-side
* interception points are concerned with different information, so there
* are two information objects: <code>ClientRequestInfo</code> is passed
* to the client-side interception points and <code>ServerRequestInfo</code>
* is passed to the server-side interception points. But there is
* information that is common to both, so they both inherit from a common
* interface: <code>RequestInfo</code>.
*
* @see ClientRequestInfo
* @see ServerRequestInfo
*/
local interface RequestInfo {
/**
* Returns an id that uniquely identifies an active request/reply
* sequence. Once a request/reply sequence is concluded this ID may be
* reused. Note that this id is not the same as the GIOP
* <code>request_id</code>. If GIOP is the transport mechanism used,
* then these IDs may very well be the same, but this is not guaranteed
* nor required.
*/
readonly attribute unsigned long request_id;
/**
* Returns the name of the operation being invoked.
*/
readonly attribute string operation;
/**
* Returns an array of <code>Parameter</code> objects, containing the
* arguments on the operation being invoked. If there are no arguments,
* this attribute will be a zero length array.
* <p>
* Not all environments provide access to the arguments. With the Java
* portable bindings, for example, the arguments are not available.
* In these environments, when this attribute is accessed,
* <code>NO_RESOURCES</code> will be thrown with a standard minor code
* of 1.
* <p>
* <i>Note: Arguments are available for DSI/DII calls.</i>
*
* @exception NO_RESOURCES thrown if arguments are not available.
* @see <a href="package-summary.html#unimpl">
* <code>PortableInterceptor</code> package comments for
* limitations / unimplemented features</a>
*/
readonly attribute Dynamic::ParameterList arguments;
/**
* Returns an array of <code>TypeCode</code> objects describing the
* <code>TypeCode</code>s of the user exceptions that this operation
* invocation may throw. If there are no user exceptions, this
* will return a zero length array.
* <p>
* Not all environments provide access to the exception list. With
* the Java portable bindings, for example, the exception list is
* not available. In these environments, when this attribute is
* accessed, <code>NO_RESOURCES</code> will be thrown with a
* standard minor code of 1.
* <p>
* <i>Note: Exceptions are available for DSI/DII calls.</i>
*
* @exception NO_RESOURCES thrown if exceptions are not available.
* @see <a href="package-summary.html#unimpl">
* <code>PortableInterceptor</code> package comments for
* limitations / unimplemented features</a>
*/
readonly attribute Dynamic::ExceptionList exceptions;
/**
* Returns an array of <code>String</code> objects describing the
* contexts that may be passed on this operation invocation. If there
* are no contexts, this will return a zero length array.
* <p>
* Not all environments provide access to the context list. With the
* Java portable bindings, for example, the context list is not
* available. In these environments, when this attribute is accessed,
* <code>NO_RESOURCES</code> will be thrown with a standard minor code
* of 1.
* <p>
* <i>Note: Contexts are available for DSI/DII calls.</i>
*
* @exception NO_RESOURCES thrown if contexts are not available.
* @see <a href="package-summary.html#unimpl">
* <code>PortableInterceptor</code> package comments for
* limitations / unimplemented features</a>
*/
readonly attribute Dynamic::ContextList contexts;
/**
* Returns an array of <code>String</code> objects containing the
* contexts being sent on the request.
* <p>
* Not all environments provide access to the context. With the Java
* portable bindings, for example, the context is not available. In
* these environments, when this attribute is accessed, NO_RESOURCES will
* be thrown with standard minor code of 1.
* <p>
* <i>Note: <code>operation_context</code> is available for
* DSI/DII calls.</i>
*
* @exception NO_RESOURCES thrown if operation context is not available.
* @see <a href="package-summary.html#unimpl">
* <code>PortableInterceptor</code> package comments for
* limitations / unimplemented features</a>
*/
readonly attribute Dynamic::RequestContext operation_context;
/**
* Returns an any containing the result of the operation invocation.
* If the operation return type is void, this attribute will be an any
* containing a type code with a <code>TCKind</code> value of
* <code>tk_void</code> and no value.
* <p>
* Not all environments provide access to the result. With the Java
* portable bindings, for example, the result is not available. In
* these environments, when this attribute is accessed,
* <code>NO_RESOURCES</code> will be thrown with a standard minor code of
* 1.
* <p>
* <i>Note: Result is available for DSI/DII calls.</i>
*
* @exception NO_RESOURCES thrown if result is not available.
* @see <a href="package-summary.html#unimpl">
* <code>PortableInterceptor</code> package comments for
* limitations / unimplemented features</a>
*/
readonly attribute any result;
/**
* Indicates whether a response is expected.
* <p>
* On the client, a reply is not returned when
* <code>response_expected</code> is false, so <code>receive_reply</code>
* cannot be called. <code>receive_other</code> is called unless an
* exception occurs, in which case <code>receive_exception</code> is
* called.
* <p>
* On the client, within <code>send_poll</code>, this attribute is true.
*/
readonly attribute boolean response_expected;
/**
* Defines how far the request shall progress before control is returned
* to the client. This is defined in the Messaging specification, and
* is pertinent only when <code>response_expected</code> is false. If
* <code>response_expected</code> is true, the value of
* <code>sync_scope</code> is undefined. This attribute may have one of
* the following values:
* <ul>
* <li><code>Messaging.SYNC_NONE</code></li>
* <li><code>Messaging.SYNC_WITH_TRANSPORT</code></li>
* <li><code>Messaging.SYNC_WITH_SERVER</code></li>
* <li><code>Messaging.SYNC_WITH_TARGET</code></li>
* </ul>
* On the server, for all scopes, a reply will be created from the
* return of the target operation call, but the reply will not return
* to the client. Although it does not return to the client, it does
* occur, so the normal server-side interception points are
* followed (i.e., <code>receive_request_service_contexts</code>,
* <code>receive_request</code>, <code>send_reply</code> or
* <code>send_exception</code>).
* <p>
* For <code>SYNC_WITH_SERVER</code> and <code>SYNC_WITH_TARGET</code>,
* the server does send an empty reply back to the client before the
* target is invoked. This reply is not intercepted by server-side
* Interceptors.
*
* @see <a href="package-summary.html#unimpl">
* <code>PortableInterceptor</code> package comments for
* limitations / unimplemented features</a>
*/
readonly attribute Messaging::SyncScope sync_scope;
/**
* Describes the state of the result of the operation invocation. The
* return value can be one of the following:
* <ul>
* <li><code>PortableInterceptor.SUCCESSFUL</code></li>
* <li><code>PortableInterceptor.SYSTEM_EXCEPTION</code></li>
* <li><code>PortableInterceptor.USER_EXCEPTION</code></li>
* <li><code>PortableInterceptor.LOCATION_FORWARD</code></li>
* <li><code>PortableInterceptor.TRANSPORT_RETRY</code></li>
* </ul>
* On the client:
* <ul>
* <li>Within the <code>receive_reply</code> interception point, this
* will only return <code>SUCCESSFUL</code></li>.
* <li>Within the <code>receive_exception</code> interception point,
* this will be either <code>SYSTEM_EXCEPTION</code> or
* <code>USER_EXCEPTION</code>.</li>
* <li>Within the <code>receive_other</code> interception point, this
* will be any of: <code>SUCCESSFUL</code>,
* <code>LOCATION_FORWARD</code>, or <code>TRANSPORT_RETRY</code>.
* <code>SUCCESSFUL</code> means an asynchronous request returned
* successfully. <code>LOCATION_FORWARD</code> means that a reply
* came back with <code>LOCATION_FORWARD</code> as its status.
* <code>TRANSPORT_RETRY</code> means that the transport
* mechanism indicated a retry - a GIOP reply with a status of
* <code>NEEDS_ADDRESSING_MODE</code>, for instance. </li>
* </ul>
* On the server:
* <ul>
* <li>Within the <code>send_reply</code> interception point, this
* will only be <code>SUCCESSFUL</code>.</li>
* <li>Within the <code>send_exception</code> interception point,
* this will be either <code>SYSTEM_EXCEPTION</code> or
* <code>USER_EXCEPTION</code>.</li>
* <li>Within the <code>send_other</code> interception point, this
* attribute will be any of: <code>SUCCESSFUL</code>, or
* <code>LOCATION_FORWARD</code>. <code>SUCCESSFUL</code> means
* an asynchronous request returned successfully.
* <code>LOCATION_FORWARD</code> means that a reply came back
* with <code>LOCATION_FORWARD</code> as its status.</li>
* </ul>
*
* @see SUCCESSFUL
* @see SYSTEM_EXCEPTION
* @see USER_EXCEPTION
* @see LOCATION_FORWARD
* @see TRANSPORT_RETRY
*/
readonly attribute ReplyStatus reply_status;
/**
* Contains the object to which the request will be forwarded, if the
* <code>reply_status</code> attribute is <code>LOCATION_FORWARD</code>.
* It is indeterminate whether a forwarded request will actually occur.
*/
readonly attribute Object forward_reference;
/**
* Returns the data from the given slot of the
* <code>PortableInterceptor.Current</code> that is in the scope of
* the request.
* <p>
* If the given slot has not been set, then an any containing a
* type code with a <code>TCKind</code> value of <code>tk_null</code> is
* returned.
*
* @param id The <code>SlotId</code> of the slot which is to be
* returned.
* @return The slot data, in the form of an any, obtained with the
* given identifier.
* @exception InvalidSlot thrown if the ID does not define an
* allocated slot.
* @see Current
*/
any get_slot (in SlotId id) raises (InvalidSlot);
/**
* Returns a copy of the service context with the given ID that
* is associated with the request.
* <p>
* @param id The <code>IOP.ServiceId</code> of the service context
* which is to be returned.
* @return The <code>IOP.ServiceContext</code> obtained with the
* given identifier.
* @exception BAD_PARAM thrown with a standard minor code of 26, if the
* request's service context does not contain an entry for that ID.
*/
IOP::ServiceContext get_request_service_context
(in IOP::ServiceId id);
/**
* Returns a copy of the service context with the given ID that
* is associated with the reply.
*
* @param id The <code>IOP.ServiceId</code> of the service context
* which is to be returned.
* @return The <code>IOP.ServiceContext</code> obtained with the given
* identifier.
* @exception BAD_PARAM thrown with a standard minor code of 26 if the
* request's service context does not contain an entry for that ID.
*/
IOP::ServiceContext get_reply_service_context
(in IOP::ServiceId id);
};
/**
* Request Information, accessible to client-side request interceptors.
* <p>
* Some attributes and operations on <code>ClientRequestInfo</code> are
* not valid at all interception points. The following table shows the
* validity of each attribute or operation. If it is not valid, attempting
* to access it will result in a <code>BAD_INV_ORDER</code> being thrown
* with a standard minor code of 14.
* <p>
*
* <table border=1 summary="Shows the validity of each attribute or operation">
* <thead>
* <tr>
* <th> </th>
* <th id="send_req">send_request</th>
* <th id="send_poll">send_poll</th>
* <th id="rec_reply">receive_reply</th>
* <th id="rec_ex">receive_exception</th>
* <th id="rec_oth">receive_other</th>
* </tr>
* </thead>
* <tbody>
*
* <tr>
* <td id="ri" colspan=6><i>Inherited from RequestInfo:</i></td>
* </tr>
*
* <tr><th id="req_id"><p align="left">request_id</p></th>
* <td headers="ri req_id send_req">yes</td>
* <td headers="ri req_id send_poll">yes</td>
* <td headers="ri req_id rec_reply">yes</td>
* <td headers="ri req_id rec_ex">yes</td>
* <td headers="ri req_id rec_oth">yes</td></tr>
*
* <tr><th id="op"><p align="left">operation</p></th>
* <td headers="ri op send_req">yes</td>
* <td headers="ri op send_poll">yes</td>
* <td headers="ri op rec_reply">yes</td>
* <td headers="ri op rec_ex">yes</td>
* <td headers="ri op rec_oth">yes</td></tr>
*
* <tr><th id="arg"><p align="left">arguments</p></th>
* <td headers="ri arg send_req">yes<sub>1</sub></td>
* <td headers="ri arg send_poll">no </td>
* <td headers="ri arg rec_reply">yes</td>
* <td headers="ri arg rec_ex">no </td>
* <td headers="ri arg rec_oth">no </td></tr>
*
* <tr><th id="exc"><p align="left">exceptions</p></th>
* <td headers="ri exc send_req">yes</td>
* <td headers="ri exc send_poll">no </td>
* <td headers="ri exc rec_reply">yes</td>
* <td headers="ri exc rec_ex">yes</td>
* <td headers="ri exc rec_oth">yes</td></tr>
*
* <tr><th id="con"><p align="left">contexts</p></th>
* <td headers="ri con send_req">yes</td>
* <td headers="ri con send_poll">no </td>
* <td headers="ri con rec_reply">yes</td>
* <td headers="ri con rec_ex">yes</td>
* <td headers="ri con rec_oth">yes</td></tr>
*
* <tr><th id="op_con"><p align="left">operation_context</p></th>
* <td headers="ri op_con send_req">yes</td>
* <td headers="ri op_con send_poll">no </td>
* <td headers="ri op_con rec_reply">yes</td>
* <td headers="ri op_con rec_ex">yes</td>
* <td headers="ri op_con rec_oth">yes</td>
* </tr>
*
* <tr><th id="result"><p align="left">result</p></th>
* <td headers="ri result send_req">no </td>
* <td headers="ri result send_poll">no </td>
* <td headers="ri result rec_reply">yes</td>
* <td headers="ri result rec_ex">no </td>
* <td headers="ri result rec_oth">no </td>
* </tr>
*
* <tr><th id="res_exp"><p align="left">response_expected</p></th>
* <td headers="ri res_exp send_req">yes</td>
* <td headers="ri res_exp send_poll">yes</td>
* <td headers="ri res_exp rec_reply">yes</td>
* <td headers="ri res_exp rec_ex">yes</td>
* <td headers="ri res_exp rec_oth">yes</td></tr>
*
* <tr><th id="sync_sco"><p align="left">sync_scope</p></th>
* <td headers="ri sync_sco send_req">yes</td>
* <td headers="ri sync_sco send_poll">no </td>
* <td headers="ri sync_sco rec_reply">yes</td>
* <td headers="ri sync_sco rec_ex">yes</td>
* <td headers="ri sync_sco rec_oth">yes</td>
* </tr>
*
* <tr><th id="rep_stat"><p align="left">reply_status</p></th>
* <td headers="ri rep_stat send_req">no </td>
* <td headers="ri rep_stat send_poll">no </td>
* <td headers="ri rep_stat rec_reply">yes</td>
* <td headers="ri rep_stat rec_ex">yes</td>
* <td headers="ri rep_stat rec_oth">yes</td></tr>
*
* <tr><th id="for_ref"><p align="left">forward_reference</p></th>
* <td headers="ri for_ref send_req">no </td>
* <td headers="ri for_ref send_poll">no </td>
* <td headers="ri for_ref rec_reply">no </td>
* <td headers="ri for_ref rec_ex">no </td>
* <td headers="ri for_ref rec_oth">yes<sub>2</sub>
* </td></tr>
*
* <tr><th id="get_slot"><p align="left">get_slot</p></th>
* <td headers="ri get_slot send_req">yes</td>
* <td headers="ri get_slot send_poll">yes</td>
* <td headers="ri get_slot rec_reply">yes</td>
* <td headers="ri get_slot rec_ex">yes</td>
* <td headers="ri get_slot rec_oth">yes</td></tr>
*
* <tr><th id="grsc"><p align="left">get_request_service_context</p></th>
* <td headers="ri grsc send_req">yes</td>
* <td headers="ri grsc send_poll">no </td>
* <td headers="ri grsc rec_reply">yes</td>
* <td headers="ri grsc rec_ex">yes</td>
* <td headers="ri grsc rec_oth">yes</td></tr>
*
* <tr><th id="gpsc"><p align="left">get_reply_service_context</p></th>
* <td headers="ri gpsc send_req">no </td>
* <td headers="ri gpsc send_poll">no </td>
* <td headers="ri gpsc rec_reply">yes</td>
* <td headers="ri gpsc rec_ex">yes</td>
* <td headers="ri gpsc rec_oth">yes</td>
* </tr>
*
* <tr>
* <td id="cri" colspan=6><i>ClientRequestInfo-specific:</i></td>
* </tr>
*
* <tr><th id="target"><p align="left">target</p></th>
* <td headers="cri target send_req">yes</td>
* <td headers="cri target send_poll">yes</td>
* <td headers="cri target rec_reply">yes</td>
* <td headers="cri target rec_ex">yes</td>
* <td headers="cri target rec_oth">yes</td></tr>
*
* <tr><th id="eftarget"><p align="left">effective_target</p></th>
* <td headers="cri eftarget send_req">yes</td>
* <td headers="cri eftarget send_poll">yes</td>
* <td headers="cri eftarget rec_reply">yes</td>
* <td headers="cri eftarget rec_ex">yes</td>
* <td headers="cri eftarget rec_oth">yes</td>
* </tr>
*
* <tr><th id="efprof"><p align="left">effective_profile</p></th>
* <td headers="cri efprof send_req">yes</td>
* <td headers="cri efprof send_poll">yes</td>
* <td headers="cri efprof rec_reply">yes</td>
* <td headers="cri efprof rec_ex">yes</td>
* <td headers="cri efprof rec_oth">yes</td></tr>
*
* <tr><th id="rxp"><p align="left">received_exception</p></th>
* <td headers="cri rxp send_req">no </td>
* <td headers="cri rxp send_poll">no </td>
* <td headers="cri rxp rec_reply">no </td>
* <td headers="cri rxp rec_ex">yes</td>
* <td headers="cri rxp rec_oth">no </td></tr>
*
* <tr><th id="rei"><p align="left">received_exception_id</p></th>
* <td headers="cri rei send_req">no </td>
* <td headers="cri rei send_poll">no </td>
* <td headers="cri rei rec_reply">no </td>
* <td headers="cri rei rec_ex">yes</td>
* <td headers="cri rei rec_oth">no </td></tr>
*
* <tr><th id="gec"><p align="left">get_effective_component</p></th>
* <td headers="cri gec send_req">yes</td>
* <td headers="cri gec send_poll">no </td>
* <td headers="cri gec rec_reply">yes</td>
* <td headers="cri gec rec_ex">yes</td>
* <td headers="cri gec rec_oth">yes</td></tr>
*
* <tr><th id="gecs"><p align="left">get_effective_components</p></th>
* <td headers="cri gecs send_req">yes</td>
* <td headers="cri gecs send_poll">no </td>
* <td headers="cri gecs rec_reply">yes</td>
* <td headers="cri gecs rec_ex">yes</td>
* <td headers="cri gecs rec_oth">yes</td></tr>
*
* <tr><th id="grpcy"><p align="left">get_request_policy</p></th>
* <td headers="cri grpcy send_req">yes</td>
* <td headers="cri grpcy send_poll">no </td>
* <td headers="cri grpcy rec_reply">yes</td>
* <td headers="cri grpcy rec_ex">yes</td>
* <td headers="cri grpcy rec_oth">yes</td></tr>
*
* <tr><th id="arsc"><p align="left">add_request_service_context</p></th>
* <td headers="cri arsc send_req">yes</td>
* <td headers="cri arsc send_poll">no </td>
* <td headers="cri arsc rec_reply">no </td>
* <td headers="cri arsc rec_ex">no </td>
* <td headers="cri arsc rec_oth">no </td></tr>
*
* </tbody>
* </table>
*
* <ol>
* <li>When <code>ClientRequestInfo</code> is passed to
* <code>send_request</code>, there is an entry in the list for every
* argument, whether in, inout, or out. But only the in and inout
* arguments will be available.</li>
* <li>If the <code>reply_status</code> atribute is not
* <code>LOCATION_FORWARD</code>, accessing this attribute will
* throw <code>BAD_INV_ORDER</code> with a standard minor code of
* 14.</li>
* </ol>
*
* @see ClientRequestInterceptor
*/
local interface ClientRequestInfo : RequestInfo {
/**
* Returns the object which the client called to perform the
* operation.
*
* @see #effective_target
*/
readonly attribute Object target;
/**
* Returns the actual object on which the operation will be invoked.
* If the <code>reply_status</code> is <code>LOCATION_FORWARD</code>,
* then on subsequent requests, <code>effective_target</code> will
* contain the forwarded IOR while target will remain unchanged.
*
* @see #target
*/
readonly attribute Object effective_target;
/**
* Returns the profile that will be used to send the request. If a
* location forward has occurred for this operation's object and
* that object's profile changed accordingly, then this profile will
* be that located profile.
*/
readonly attribute IOP::TaggedProfile effective_profile;
/**
* Returns an any which contains the exception to be returned to
* the client.
* <p>
* If the exception is a user exception which cannot be inserted
* into an any (e.g., it is unknown or the bindings don t provide
* the <code>TypeCode</code>), then this attribute will be an any
* containing the system exception <code>UNKNOWN</code> with a
* standard minor code of 1. However, the repository id of
* the exception is available in the <code>received_exception_id</code>
* attribute.
*
* @see #received_exception_id
*/
readonly attribute any received_exception;
/**
* Returns the repository id of the exception to be returned to
* the client.
*
* @see #received_exception
* @see <a href="package-summary.html#unimpl">
* <code>PortableInterceptor</code> package comments for
* limitations / unimplemented features</a>
*/
readonly attribute CORBA::RepositoryId received_exception_id;
/**
* Returns the <code>IOP.TaggedComponent</code> with the given ID from
* the profile selected for this request.
* <p>
* If there is more than one component for a given component ID, it
* is undefined which component this operation returns. If there is
* more than one component for a given component ID,
* <code>get_effective_components</code> should be called instead.
*
* @param id The component id of the component which
* is to be returned.
* @return The <code>IOP.TaggedComponent</code> obtained with the
* given identifier.
* @exception BAD_PARAM thrown, with a standard minor code of 28, if
* no component exists for the given component ID.
* @see #get_effective_components
*/
IOP::TaggedComponent get_effective_component
(in IOP::ComponentId id);
/**
* Returns an array of all tagged components with the given ID from the
* profile selected for this request.
*
* @param id The component id of the components which are to be returned.
* @return An array of <code>TaggedComponent</code> objects, each of
* which contains the given identifier.
* @exception BAD_PARAM thrown, with a standard minor code of 28, if
* no component exists for the given component ID.
* @see #get_effective_component
*/
IOP::TaggedComponentSeq get_effective_components
(in IOP::ComponentId id);
/**
* Returns the given policy in effect for this operation.
*
* @exception INV_POLICY thrown, with a standard minor code of 1, if the
* policy type is not valid either because the specified type is
* not supported by this ORB or because a policy object of that type
* is not associated with this Object
* @param type The policy type which specifies the policy to be
* returned.
* @return The <code>CORBA.Policy</code> obtained with the given type.
* @see <a href="package-summary.html#unimpl">
* <code>PortableInterceptor</code> package comments for
* limitations / unimplemented features</a>
*/
CORBA::Policy get_request_policy
(in CORBA::PolicyType type);
/**
* Allows Interceptors to add service contexts to the request.
* <p>
* There is no declaration of the order of the service contexts.
* They may or may not appear in the order that they are added.
*
* @param service_context The <code>IOP.ServiceContext</code> to be
* added to the request.
* @param replace Indicates the behavior of this operation when a
* service context already exists with the given ID. If false,
* then <code>BAD_INV_ORDER</code> with a standard minor code of 15
* is thrown. If true, then the existing service context is
* replaced by the new one.
*/
void add_request_service_context (
in IOP::ServiceContext service_context,
in boolean replace);
};
// Should be type string
typedef string ServerId ;
// This should actually be the CORBA::ORBid type once that is available
typedef string ORBId ;
/** The name of an object adapter. This is unique only within
* the scope of the ORB that created the object adapter.
*/
typedef org::omg::CORBA::StringSeq AdapterName ;
/** Type of an object id. This provides the identity of a particular
* object that was created by an object adapter.
*/
typedef org::omg::CORBA::OctetSeq ObjectId ;
/**
* Request Information, accessible to server-side request interceptors.
* <p>
* Some attributes and operations on <code>ServerRequestInfo</code> are not
* valid at all interception points. The following table shows the validity
* of each attribute or operation. If it is not valid, attempting to access
* it will result in a <code>BAD_INV_ORDER</code> being thrown with a
* standard minor code of 14.
* <p>
*
*
* <table border=1 summary="Shows the validity of each attribute or operation">
* <thead>
* <tr>
* <th> </th>
* <th id="rec_req_ser_con" valign="bottom">receive_request_<br>service_contexts</th>
* <th id="rec_req" valign="bottom">receive_request</th>
* <th id="send_rep" valign="bottom">send_reply</th>
* <th id="send_exc" valign="bottom">send_exception</th>
* <th id="send_oth" valign="bottom">send_other</th>
* </tr>
* </thead>
* <tbody>
*
*
* <tr>
* <td id="ri" colspan=6><i>Inherited from RequestInfo:</i></td>
* </tr>
*
* <tr><th id="req_id"><p align="left">request_id</p></th>
* <td headers="ri req_id rec_req_ser_con">yes</td>
* <td headers="ri req_id rec_req">yes</td>
* <td headers="ri req_id send_rep">yes</td>
* <td headers="ri req_id send_exc">yes</td>
* <td headers="ri req_id send_oth">yes</td></tr>
*
* <tr><th id="op"><p align="left">operation</p></th>
* <td headers="ri op rec_req_ser_con">yes</td>
* <td headers="ri op rec_req">yes</td>
* <td headers="ri op send_rep">yes</td>
* <td headers="ri op send_exc">yes</td>
* <td headers="ri op send_oth">yes</td></tr>
*
* <tr><th id="args"><p align="left">arguments</p></th>
* <td headers="ri args rec_req_ser_con">no </td>
* <td headers="ri args rec_req">yes<sub>1</sub></td>
* <td headers="ri args send_rep">yes</td>
* <td headers="ri args send_exc">no<sub>2</sub></td>
* <td headers="ri args send_oth">no<sub>2</sub>
* </td></tr>
*
* <tr><th id="exps"><p align="left">exceptions</p></th>
* <td headers="ri exps rec_req_ser_con">no </td>
* <td headers="ri exps rec_req">yes</td>
* <td headers="ri exps send_rep">yes</td>
* <td headers="ri exps send_exc">yes</td>
* <td headers="ri exps send_oth">yes</td></tr>
*
* <tr><th id="contexts"><p align="left">contexts</p></th>
* <td headers="ri contexts rec_req_ser_con">no </td>
* <td headers="ri contexts rec_req">yes</td>
* <td headers="ri contexts send_rep">yes</td>
* <td headers="ri contexts send_exc">yes</td>
* <td headers="ri contexts send_oth">yes</td></tr>
*
* <tr><th id="op_con"><p align="left">operation_context</p></th>
* <td headers="ri op_con rec_req_ser_con">no </td>
* <td headers="ri op_con rec_req">yes</td>
* <td headers="ri op_con send_rep">yes</td>
* <td headers="ri op_con send_exc">no </td>
* <td headers="ri op_con send_oth">no </td>
* </tr>
*
* <tr><th id="result"><p align="left">result</p></th>
* <td headers="ri result rec_req_ser_con">no </td>
* <td headers="ri result rec_req">no </td>
* <td headers="ri result send_rep">yes</td>
* <td headers="ri result send_exc">no </td>
* <td headers="ri result send_oth">no </td>
* </tr>
*
* <tr><th id="res_ex"><p align="left">response_expected</p></th>
* <td headers="ri res_ex rec_req_ser_con">yes</td>
* <td headers="ri res_ex rec_req">yes</td>
* <td headers="ri res_ex send_rep">yes</td>
* <td headers="ri res_ex send_exc">yes</td>
* <td headers="ri res_ex send_oth">yes</td></tr>
*
* <tr><th id="syn_scp"><p align="left">sync_scope</p></th>
* <td headers="ri syn_scp rec_req_ser_con">yes</td>
* <td headers="ri syn_scp rec_req">yes</td>
* <td headers="ri syn_scp send_rep">yes</td>
* <td headers="ri syn_scp send_exc">yes</td>
* <td headers="ri syn_scp send_oth">yes</td></tr>
*
* <tr><td><b>request_id</b></td>
* <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>operation</b></td>
* <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>arguments</b></td>
* <td>no </td> <td>yes<sub>1</sub</td>
* <td>yes</td> <td>no<sub>2</sub></td>
* <td>no<sub>2</sub>
* </td></tr>
*
* <tr><td><b>exceptions</b></td>
* <td>no </td> <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>contexts</b></td>
* <td>no </td> <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>operation_context</b></td>
* <td>no </td> <td>yes</td> <td>yes</td> <td>no </td> <td>no </td></tr>
*
* <tr><td><b>result</b></td>
* <td>no </td> <td>no </td> <td>yes</td> <td>no </td> <td>no </td></tr>
*
* <tr><td><b>response_expected</b></td>
* <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>sync_scope</b></td>
* <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>reply_status</b></td>
* <td>no </td> <td>no </td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>forward_reference</b></td>
* <td>no </td> <td>no </td> <td>no </td> <td>no </td> <td>yes<sub>2</sub>
* </td></tr>
*
* <tr><td><b>get_slot</b></td>
* <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>get_request_service_context</b></td>
* <td>yes</td> <td>no </td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>get_reply_service_context</b></td>
* <td>no </td> <td>no </td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr>
* <td colspan=6><i>ServerRequestInfo-specific:</i></td>
* </tr>
*
* <tr><td><b>sending_exception</b></td>
* <td>no </td> <td>no </td> <td>no </td> <td>yes</td> <td>no </td></tr>
*
* <tr><td><b>object_id</b></td>
* <td>no </td> <td>yes</td> <td>yes</td> <td>yes<sub>3</sub></td>
* <td>yes<sub>3</sub>
* </td></tr>
*
* <tr><td><b>adapter_id</b></td>
* <td>no </td> <td>yes</td> <td>yes</td> <td>yes<sub>3</sub></td>
* <td>yes<sub>3</sub>
* </td></tr>
*
* <tr><td><b>server_id</b></td>
* <td>no </td> <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>orb_id</b></td>
* <td>no </td> <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>adapter_name</b></td>
* <td>no </td> <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>target_most_derived_interface</b></td>
* <td>no </td> <td>yes</td> <td>no<sub>4</sub></td>
* <td>no<sub>4</sub></td>
* <td>no<sub>4</sub>
* </td></tr>
*
* <tr><td><b>get_server_policy</b></td>
* <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>set_slot</b></td>
* <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
*
* <tr><td><b>target_is_a</b></td>
* <td>no </td> <td>yes</td> <td>no<sub>4</sub></td>
* <td>no<sub>4</sub></td>
* <td>no<sub>4</sub>
* </td></tr>
*
* <tr><td><b>add_reply_service_context</b></td>
* <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td> <td>yes</td></tr>
* </tbody>
* </table>
*
* <ol>
* <li>When <code>ServerRequestInfo</code> is passed to
* <code>receive_request</code>, there is an entry in the list for
* every argument, whether in, inout, or out. But only the in and
* inout arguments will be available.</li>
* <li>If the <code>reply_status</code> attribute is not
* <code>LOCATION_FORWARD</code>, accessing this attribute will throw
* <code>BAD_INV_ORDER</code> with a standard minor code of 14.</li>
* <li>If the servant locator caused a location forward, or thrown an
* exception, this attribute/operation may not be available in this
* interception point. <code>NO_RESOURCES</code> with a standard minor
* code of 1 will be thrown if it is not available.</li>
* <li>The operation is not available in this interception point because
* the necessary information requires access to the target object's
* servant, which may no longer be available to the ORB. For example,
* if the object's adapter is a POA that uses a
* <code>ServantLocator</code>, then the ORB invokes the interception
* point after it calls <code>ServantLocator.postinvoke()</code></li>.
* </ol>
*
* @see ServerRequestInterceptor
*/
local interface ServerRequestInfo : RequestInfo {
/**
* Returns an any which contains the exception to be returned to
* the client.
* <p>
* If the exception is a user exception which cannot be inserted into
* an any (e.g., it is unknown or the bindings don't provide the
* <code>TypeCode</code>), then this attribute will be an any
* containing the system exception <code>UNKNOWN</code> with a
* standard minor code of 1.
*
* @see <a href="package-summary.html#unimpl">
* <code>PortableInterceptor</code> package comments for
* limitations / unimplemented features</a>
*/
readonly attribute any sending_exception;
/**
* Returns the opaque <code>object_id</code> describing the target of
* the operation invocation.
*/
readonly attribute ObjectId object_id;
/**
* Returns the opaque identifier for the object adapter.
*/
readonly attribute CORBA::OctetSeq adapter_id;
/**
* Returns the server ID that was specified on ORB::init using the -ORBServerId
* argument.
*/
readonly attribute ServerId server_id ;
/**
* Returns the ID that was used to create the ORB.
*/
readonly attribute ORBId orb_id ;
/**
* Returns the sequence of strings that identifies the object
* adapter instance that is handling this request.
*/
readonly attribute AdapterName adapter_name ;
/**
* Returns the repository id for the most derived interface of the
* servant.
*/
readonly attribute CORBA::RepositoryId
target_most_derived_interface;
/**
* Returns the policy in effect for this operation for the given
* policy type. The returned <code>CORBA.Policy</code> object shall
* only be a policy whose type was registered via
* <code>register_policy_factory</code>.
*
* @param type The <code>CORBA.PolicyType</code> which specifies the
* policy to be returned.
* @return The <code>CORBA.Policy</code> obtained with the given
* policy type.
* @exception INV_POLICY thrown, with a standard minor code of 2, if
* a policy for the given type was not registered via
* <code>register_policy_factory</code>.
* @see ORBInitInfo#register_policy_factory
*/
CORBA::Policy get_server_policy
(in CORBA::PolicyType type);
/**
* Allows an Interceptor to set a slot in the
* <code>PortableInterceptor.Current</code> that is in the scope of
* the request. If data already exists in that slot, it will be
* overwritten.
*
* @param id The id of the slot.
* @param data The data, in the form of an any, to store in that slot.
* @exception InvalidSlot thrown if the ID does not define an allocated
* slot.
* @see Current
*/
void set_slot (in SlotId id, in any data) raises (InvalidSlot);
/**
* Returns true if the servant is the given repository id,
* false if it is not.
*
* @param id The caller wants to know if the servant is this
* repository id.
* @return Is the servant the given RepositoryId?
*/
boolean target_is_a (in CORBA::RepositoryId id);
/**
* Allows Interceptors to add service contexts to the request.
* <p>
* There is no declaration of the order of the service contexts.
* They may or may not appear in the order that they are added.
*
* @param service_context The <code>IOP.ServiceContext</code> to add to
* the reply.
* @param replace Indicates the behavior of this operation when a
* service context already exists with the given ID. If false,
* then <code>BAD_INV_ORDER</code> with a standard minor code of 15
* is thrown. If true, then the existing service context is
* replaced by the new one.
* @exception BAD_INV_ORDER thrown, with a standard minor code of 15, if
* replace is false and a service context already exists with the
* given ID.
*/
void add_reply_service_context (
in IOP::ServiceContext service_context,
in boolean replace);
};
/**
* Client-side request interceptor.
* <p>
* A request Interceptor is designed to intercept the flow of a
* request/reply sequence through the ORB at specific points so that
* services can query the request information and manipulate the service
* contexts which are propagated between clients and servers. The primary
* use of request Interceptors is to enable ORB services to transfer
* context information between clients and servers. There are two types
* of request Interceptors: client-side and server-side.
* <p>
* To write a client-side Interceptor, implement the
* <code>ClientRequestInterceptor</code> interface.
*
* @see ClientRequestInfo
*/
local interface ClientRequestInterceptor : Interceptor {
/**
* Allows an Interceptor to query request information and modify the
* service context before the request is sent to the server.
* <p>
* This interception point may throw a system exception. If it does,
* no other Interceptors' <code>send_request</code> operations are called.
* Those Interceptors on the Flow Stack are popped and their
* <code>receive_exception</code> interception points are called. This
* interception point may also throw a <code>ForwardRequest</code>
* exception. If an Interceptor throws this exception, no other
* Interceptors' <code>send_request</code> operations are
* called. Those Interceptors on the Flow Stack are popped and their
* <code>receive_other</code> interception points are called.
* <p>
* Compliant Interceptors shall properly follow completion_status
* semantics if they throw a system exception from this interception
* point. The <code>completion_status</code> shall be
* <code>COMPLETED_NO</code>.
*
* @param ri Information about the current request being intercepted.
* @exception ForwardRequest If thrown, indicates to the ORB that a
* retry of the request should occur with the new object given in
* the exception.
*/
void send_request (in ClientRequestInfo ri) raises (ForwardRequest);
/**
* Allows an Interceptor to query information during a Time-Independent
* Invocation (TII) polling get reply sequence.
* <p>
* With TII, an application may poll for a response to a request sent
* previously by the polling client or some other client. This poll is
* reported to Interceptors through the <code>send_poll</code>
* interception point and the response is returned through the
* <code>receive_reply</code> or <code>receive_exception</code>
* interception points. If the response is not available before the
* poll time-out expires, the system exception <code>TIMEOUT</code> is
* thrown and <code>receive_exception</code> is called with this
* exception.
* <p>
* This interception point may throw a system exception. If it does,
* no other Interceptors' <code>send_poll</code> operations are
* called. Those Interceptors on the Flow Stack are popped and their
* <code>receive_exception</code> interception points are called.
* <p>
* Compliant Interceptors shall properly follow
* <code>completion_status</code> semantics if they throw a system
* exception from this interception point. The completion_status shall be
* <code>COMPLETED_NO</code>.
*
* @param ri Information about the current request being intercepted.
* @exception TIMEOUT thrown if the response is not available before
* the poll time-out expires
*/
void send_poll (in ClientRequestInfo ri);
/**
* Allows an Interceptor to query the information on a reply after it
* is returned from the server and before control is returned to the
* client.
* <p>
* This interception point may throw a system exception. If it does,
* no other Interceptors' <code>receive_reply</code> operations are
* called. The remaining Interceptors in the Flow Stack shall have
* their <code>receive_exception</code> interception point called.
* <p>
* Compliant Interceptors shall properly follow
* <code>completion_status</code> semantics if they throw a system
* exception from this interception point. The
* <code>completion_status</code> shall be <code>COMPLETED_YES</code>.
*
* @param ri Information about the current request being intercepted.
*/
void receive_reply (in ClientRequestInfo ri);
/**
* Indicates to the interceptor that an exception occurred. Allows
* an Interceptor to query the exception's information before it is
* thrown to the client.
* <p>
* This interception point may throw a system exception. This has the
* effect of changing the exception which successive Interceptors
* popped from the Flow Stack receive on their calls to
* <code>receive_exception</code>. The exception thrown to the client
* will be the last exception thrown by an Interceptor, or the original
* exception if no Interceptor changes the exception.
* <p>
* This interception point may also throw a <code>ForwardRequest</code>
* exception. If an Interceptor throws this exception, no other
* Interceptors' <code>receive_exception</code> operations are called.
* The remaining Interceptors in the Flow Stack are popped and have their
* <code>receive_other</code> interception point called.
* <p>
* If the <code>completion_status</code> of the exception is not
* <code>COMPLETED_NO</code>, then it is inappropriate for this
* interception point to throw a <code>ForwardRequest</code> exception.
* The request s at-most-once semantics would be lost.
* <p>
* Compliant Interceptors shall properly follow
* <code>completion_status</code> semantics if they throw a system
* exception from this interception point. If the original exception is
* a system exception, the <code>completion_status</code> of the new
* exception shall be the same as on the original. If the original
* exception is a user exception, then the <code>completion_status</code>
* of the new exception shall be <code>COMPLETED_YES</code>.
* <p>
* Under some conditions, depending on what policies are in effect, an
* exception (such as <code>COMM_FAILURE</code>) may result in a retry
* of the request. While this retry is a new request with respect to
* Interceptors, there is one point of correlation between the original
* request and the retry: because control has not returned to the
* client, the <code>PortableInterceptor.Current</code> for both the
* original request and the retrying request is the same.
*
* @param ri Information about the current request being intercepted.
* @exception ForwardRequest If thrown, indicates to the ORB that a
* retry of the request should occur with the new object given in
* the exception.
*/
void receive_exception (in ClientRequestInfo ri) raises (ForwardRequest);
/**
* Allows an Interceptor to query the information available when a
* request results in something other than a normal reply or an
* exception. For example, a request could result in a retry
* (e.g., a GIOP Reply with a <code>LOCATION_FORWARD</code> status was
* received); or on asynchronous calls, the reply does not immediately
* follow the request, but control shall return to the client and an
* ending interception point shall be called.
* <p>
* For retries, depending on the policies in effect, a new request may or
* may not follow when a retry has been indicated. If a new request does
* follow, while this request is a new request, with respect to
* Interceptors, there is one point of correlation between the original
* request and the retry: because control has not returned to the client,
* the request scoped <code>PortableInterceptor.Current</code> for both
* the original request and the retrying request is the same.
* <p>
* This interception point may throw a system exception. If it does, no
* other Interceptors' <code>receive_other</code> operations are called.
* The remaining Interceptors in the Flow Stack are popped and have
* their <code>receive_exception</code> interception point called.
* <p>
* This interception point may also throw a <code>ForwardRequest</code>
* exception. If an Interceptor throws this exception, successive
* Interceptors' <code>receive_other</code> operations are called with
* the new information provided by the <code>ForwardRequest</code>
* exception.
* <p>
* Compliant Interceptors shall properly follow
* <code>completion_status</code> semantics if they throw a system
* exception from this interception point. The
* <code>completion_status</code> shall be <code>COMPLETED_NO</code>.
* If the target invocation had completed, this interception point
* would not be called.
*
* @param ri Information about the current request being intercepted.
* @exception ForwardRequest If thrown, indicates to the ORB that a
* retry of the request should occur with the new object given in
* the exception.
*/
void receive_other (in ClientRequestInfo ri) raises (ForwardRequest);
};
/**
* Server-side request interceptor.
* <p>
* A request Interceptor is designed to intercept the flow of a
* request/reply sequence through the ORB at specific points so that
* services can query the request information and manipulate the service
* contexts which are propagated between clients and servers. The primary
* use of request Interceptors is to enable ORB services to transfer
* context information between clients and servers. There are two types
* of request Interceptors: client-side and server-side.
* <p>
* To write a server-side Interceptor, implement the
* ServerRequestInterceptor interface.
*
* @see ServerRequestInfo
*/
local interface ServerRequestInterceptor : Interceptor {
/**
* Allows the interceptor to process service context information.
* <p>
* At this interception point, Interceptors must get their service
* context information from the incoming request transfer it to
* <code>PortableInterceptor.Current</code>'s slots.
* <p>
* This interception point is called before the servant manager is called.
* Operation parameters are not yet available at this point. This
* interception point may or may not execute in the same thread as
* the target invocation.
* <p>
* This interception point may throw a system exception. If it does,
* no other Interceptors' <code>receive_request_service_contexts</code>
* operations are called. Those Interceptors on the Flow Stack are
* popped and their <code>send_exception</code> interception points are
* called.
* <p>
* This interception point may also throw a <code>ForwardRequest</code>
* exception. If an Interceptor throws this exception, no other
* Interceptors' <code>receive_request_service_contexts</code> operations
* are called. Those Interceptors on the Flow Stack are popped and
* their <code>send_other</code> interception points are called.
* <p>
* Compliant Interceptors shall properly follow
* <code>completion_status</code> semantics if they throw a system
* exception from this interception point. The
* <code>completion_status</code> shall be COMPLETED_NO.
*
* @param ri Information about the current request being intercepted.
* @exception ForwardRequest If thrown, indicates to the ORB that a
* retry of the request should occur with the new object given in
* the exception.
*/
void receive_request_service_contexts (in ServerRequestInfo ri)
raises (ForwardRequest);
/**
* Allows an Interceptor to query request information after all the
* information, including operation parameters, are available. This
* interception point shall execute in the same thread as the target
* invocation.
* <p>
* In the DSI model, since the parameters are first available when
* the user code calls <code>arguments</code>, <code>receive_request</code>
* is called from within <code>arguments</code>. It is possible that
* <code>arguments</code> is not called in the DSI model. The target
* may call <code>set_exception</code> before calling
* <code>arguments</code>. The ORB shall guarantee that
* <code>receive_request</code> is called once, either through
* <code>arguments</code> or through <code>set_exception</code>. If it
* is called through <code>set_exception</code>, requesting the
* arguments will result in <code>NO_RESOURCES</code> being thrown with
* a standard minor code of 1.
* <p>
* This interception point may throw a system exception. If it does, no
* other Interceptors' <code>receive_request</code> operations are
* called. Those Interceptors on the Flow Stack are popped and their
* <code>send_exception</code> interception points are called.
* <p>
* This interception point may also throw a <code>ForwardRequest</code>
* exception. If an Interceptor throws this exception, no other
* Interceptors' <code>receive_request</code> operations are called.
* Those Interceptors on the Flow Stack are popped and their
* <code>send_other</code> interception points are called.
* <p>
* Compliant Interceptors shall properly follow
* <code>completion_status</code> semantics if they throw a system
* exception from this interception point. The
* <code>completion_status</code> shall be <code>COMPLETED_NO</code>.
*
* @param ri Information about the current request being intercepted.
* @exception ForwardRequest If thrown, indicates to the ORB that a
* retry of the request should occur with the new object given in
* the exception.
*/
void receive_request (in ServerRequestInfo ri) raises (ForwardRequest);
/**
* Allows an Interceptor to query reply information and modify the
* reply service context after the target operation has been invoked
* and before the reply is returned to the client. This interception
* point shall execute in the same thread as the target invocation.
* <p>
* This interception point may throw a system exception. If it does,
* no other Interceptors' <code>send_reply</code> operations are called.
* The remaining Interceptors in the Flow Stack shall have their
* <code>send_exception</code> interception point called.
* <p>
* Compliant Interceptors shall properly follow
* <code>completion_status</code> semantics if they throw a
* system exception from this interception point. The
* <code>completion_status</code> shall be <code>COMPLETED_YES</code>.
*
* @param ri Information about the current request being intercepted.
*/
void send_reply (in ServerRequestInfo ri);
/**
* Allows an Interceptor to query the exception information and modify
* the reply service context before the exception is thrown to the client.
* When an exception occurs, this interception point is called. This
* interception point shall execute in the same thread as the target
* invocation.
* <p>
* This interception point may throw a system exception. This has the
* effect of changing the exception which successive Interceptors
* popped from the Flow Stack receive on their calls to
* <code>send_exception</code>. The exception thrown to the client will
* be the last exception thrown by an Interceptor, or the original
* exception if no Interceptor changes the exception.
* <p>
* This interception point may also throw a <code>ForwardRequest</code>
* exception. If an Interceptor throws this exception, no other
* Interceptors' <code>send_exception</code> operations are called. The
* remaining Interceptors in the Flow Stack shall have their
* <code>send_other</code> interception points called.
* <p>
* If the <code>completion_status</code> of the exception is not
* <code>COMPLETED_NO</code>, then it is inappropriate for this
* interception point to throw a <code>ForwardRequest</code> exception.
* The request's at-most-once semantics would be lost.
* <p>
* Compliant Interceptors shall properly follow
* <code>completion_status</code> semantics if they throw a system
* exception from this interception point. If the original exception
* is a system exception, the <code>completion_status</code> of the new
* exception shall be the same as on the original. If the original
* exception is a user exception, then the <code>completion_status</code>
* of the new exception shall be <code>COMPLETED_YES</code>.
*
* @param ri Information about the current request being intercepted.
* @exception ForwardRequest If thrown, indicates to the ORB that a
* retry of the request should occur with the new object given in
* the exception.
*/
void send_exception (in ServerRequestInfo ri) raises (ForwardRequest);
/**
* Allows an Interceptor to query the information available when a
* request results in something other than a normal reply or an
* exception. For example, a request could result in a retry
* (e.g., a GIOP Reply with a <code>LOCATION_FORWARD</code> status was
* received). This interception point shall execute in the same thread
* as the target invocation.
* <p>
* This interception point may throw a system exception. If it does,
* no other Interceptors' <code>send_other</code> operations are called.
* The remaining Interceptors in the Flow Stack shall have their
* <code>send_exception</code> interception points called.
* <p>
* This interception point may also throw a <code>ForwardRequest</code>
* exception. If an Interceptor throws this exception, successive
* Interceptors' <code>send_other</code> operations are called with
* the new information provided by the <code>ForwardRequest</code>
* exception.
* <p>
* Compliant Interceptors shall properly follow
* <code>completion_status</code> semantics if they throw a system
* exception from this interception point. The
* <code>completion_status</code> shall be <code>COMPLETED_NO</code>.
*
* @param ri Information about the current request being intercepted.
* @exception ForwardRequest If thrown, indicates to the ORB that a
* retry of the request should occur with the new object given in
* the exception.
*/
void send_other (in ServerRequestInfo ri) raises (ForwardRequest);
};
/** The object reference factory. This provides the capability of
* creating an object reference.
*/
abstract valuetype ObjectReferenceFactory {
/** make_object creates a CORBA object reference according
* to the data in this template, with the given repository ID and
* object ID.
*/
Object make_object( in string repositoryId, in ObjectId object_id ) ;
} ;
/** The object reference template. An instance of this must
* exist for each object adapter created in an ORB. The server_id,
* orb_id, and adapter_name attributes uniquely identify this template
* within the scope of an IMR. Note that adapter_id is similarly unique
* within the same scope, but it is opaque, and less useful in many
* cases.
*/
abstract valuetype ObjectReferenceTemplate : ObjectReferenceFactory {
readonly attribute ServerId server_id ;
readonly attribute ORBId orb_id ;
readonly attribute AdapterName adapter_name ;
} ;
/** Sequence of object reference templates is used for reporting state
* changes that do not occur on the adapter manager.
*/
typedef sequence<ObjectReferenceTemplate> ObjectReferenceTemplateSeq ;
/** Adapter manager identifier. Every object adapter has an adapter manager,
* indicated in this API only through the ID. A group of object adapter
* instances may share the same adapter manager, in which case state transitions
* reported for the adapter manager are observed by all object adapters with the
* same adapter manager ID.
*/
typedef long AdapterManagerId ;
/** Type of object adapter state. State changes are reported either to
* the object adapter or to the adapter manager.
*/
typedef short AdapterState ;
/** Object adapter state that holds requests temporarily until the
* state is changed.
*/
const AdapterState HOLDING = 0 ;
/** Object adapter state that indicates normal request processing.
*/
const AdapterState ACTIVE = 1 ;
/** Object adapter state that causes all requests to be discarded.
*/
const AdapterState DISCARDING = 2 ;
/** Object adapter state that causes all requests to be discarded.
* This state indicates that the adapter is shutting down.
*/
const AdapterState INACTIVE = 3 ;
/** Object adapter state indicating that the adapter has been destroyed.
*/
const AdapterState NON_EXISTENT = 4 ;
/**
* Provides the server-side ORB service with access to the applicable
* policies during IOR construction and the ability to add components.
* The ORB passes an instance of its implementation of this interface as
* a parameter to <code>IORInterceptor.establish_components</code>.
*
* @see IORInterceptor
*/
local interface IORInfo {
/**
* Allows an ORB service implementation to determine what server side
* policy of a particular type is in effect for an IOR being
* constructed. When the IOR being constructed is for an object
* implemented using a POA, all Policy objects passed to the
* <code>PortableServer.POA.create_POA</code> call that created that
* POA are accessable via <code>get_effective_policy</code>.
* <p>
* If a policy for the given type is not known to the ORB, then this
* operation will throw <code>INV_POLICY</code> with a standard minor
* code of 2.
*
* @param type an int specifying the type of policy to return.
* @return The effective <code>CORBA.Policy</code> object of the
* requested type. If the given policy type is known, but no policy
* of that type is in effect, then this operation will return a
* nil object reference.
*/
CORBA::Policy get_effective_policy
(in CORBA::PolicyType type);
/**
* A portable ORB service implementation calls
* <code>add_ior_component</code> from its implementation of
* <code>establish_components</code> to add a tagged component to the
* set which will be included when constructing IORs. The components in
* this set will be included in all profiles.
* <p>
* Any number of components may exist with the same component ID.
*
* @param tagged_component The IOP.TaggedComponent to add.
*/
void add_ior_component
(in IOP::TaggedComponent tagged_component);
/**
* A portable ORB service implementation calls
* <code>add_ior_component_to_profile</code> from its implementation of
* <code>establish_components</code> to add a tagged component to the
* set which will be included when constructing IORs. The components in
* this set will be included in the specified profile.
* <p>
* Any number of components may exist with the same component ID.
*
* @param tagged_component The <code>IOP.TaggedComponent</code> to add.
* @param profile_id The profile id of the profile to
* which this component will be added.
* @exception BAD_PARAM thrown, with a standard minor code of 29, if the
* given profile ID does not define a known profile or it is
* impossible to add components to that profile.
*/
void add_ior_component_to_profile (
in IOP::TaggedComponent tagged_component,
in IOP::ProfileId profile_id);
/** Return the adapter manager id of the object adapter
* that was just created and is running IOR interceptors.
*/
readonly attribute AdapterManagerId manager_id ;
/** Return the adapter state of the object adapter
* that was just created and is running IOR interceptors.
*/
readonly attribute AdapterState state ;
/** Return the object reference template of the object adapter
* that was just created and is running IOR interceptors.
*/
readonly attribute ObjectReferenceTemplate adapter_template ;
/** On read, returns the current factory that will be used to create
* object references for the object adapter that was just created
* and is running IOR interceptors. By default, this factory is the same
* as the value of the adapter_template attribute. The current_factory
* may also be set to another object reference template inside an
* IORInterceptor_3_0.
*/
attribute ObjectReferenceFactory current_factory ;
};
/**
* Interceptor used to establish tagged components in the profiles within
* an IOR.
* <p>
* In some cases, a portable ORB service implementation may need to add
* information describing the server's or object's ORB service related
* capabilities to object references in order to enable the ORB service
* implementation in the client to function properly.
* <p>
* This is supported through the <code>IORInterceptor</code> and
* <code>IORInfo</code> interfaces.
*
* @see IORInfo
*/
local interface IORInterceptor : Interceptor {
/**
* A server side ORB calls the <code>establish_components</code>
* operation on all registered <code>IORInterceptor</code> instances
* when it is assembling the list of components that will be included
* in the profile or profiles of an object reference. This operation
* is not necessarily called for each individual object reference.
* In the case of the POA, this operation is called each time POA::create_POA
* is called. In any case, <code>establish_components</code> is
* guaranteed to be called at least once for each distinct set of
* server policies.
* <p>
* An implementation of <code>establish_components</code> must not
* throw exceptions. If it does, the ORB shall ignore the exception
* and proceed to call the next IOR Interceptor's
* <code>establish_components</code> operation.
*
* @param info The <code>IORInfo</code> instance used by the ORB
* service to query applicable policies and add components to be
* included in the generated IORs.
*/
void establish_components (in IORInfo info);
};
local interface IORInterceptor_3_0 : IORInterceptor {
/** The components_established method is invoked on all registered
* IORInterceptor_3_0 instances after establish_components
* has been invoked on all registered IORInterceptor instances.
* The adapter_template is available in info during this call.
* The current_factory may be get or set in info during this call.
* <p>
* Any exception thrown from this method is handled by the Object
* Adapter that called this interceptor. In the case of the POA,
* an exception results in a OBJ_ADAPTER exception with an OMG
* standard minor code of 6.
* @param info The IORInfo for the object adapter being created.
*/
void components_established( in IORInfo info ) ;
/** Called whenever the state of an adapter manager changes.
* For the POA, that is the POAManager. If the state change
* is reported through <code>adapter_manager_state_changed</code>,
* it is not reported through <code>adapter_state_changed</code>.
* @param id the adapter manager id of the adapter manager that
* changed state
* @param state the new state of the adapter manager
*/
void adapter_manager_state_changed( in AdapterManagerId id,
in AdapterState state ) ;
/** Called whenever the state of an object adapter changes, and
* the state change is not caused by an adapter manager. Such
* changes are reported to all registered <code>IORInterceptor_3_0</code>
* instances.
* @param templates the sequence of <code>ObjectReferenceTemplate</code> instances
* on which this state change occurred.
* @param state the new <code>AdapterState</code> shared by all of the templates.
*/
void adapter_state_changed( in ObjectReferenceTemplateSeq templates,
in AdapterState state ) ;
};
/**
* Enables policy types to be constructed using
* <code>CORBA.ORB.create_policy</code>.
* <p>
* A portable ORB service implementation registers an instance of the
* <code>PolicyFactory</code> interface during ORB initialization in order
* to enable its policy types to be constructed using
* <code>CORBA.ORB.create_policy</code>. The POA is required to preserve
* any policy which is registered with <code>ORBInitInfo</code> in this
* manner.
*
* @see ORBInitInfo#register_policy_factory
*/
local interface PolicyFactory
{
/**
* Returns an instance of the appropriate interface derived from
* <code>CORBA.Policy</code> whose value corresponds to the
* specified any.
* <p>
* The ORB calls <code>create_policy</code> on a registered
* <code>PolicyFactory</code> instance when
* <code>CORBA.ORB.create_policy</code> is called for the
* <code>PolicyType</code> under which the <code>PolicyFactory</code> has
* been registered. The <code>create_policy</code> operation then
* returns an instance of the appropriate interface derived from
* <code>CORBA.Policy</code> whose value corresponds to the specified
* any. If it cannot, it shall throw an exception as described for
* <code>CORBA.ORB.create_policy</code>.
*
* @param type An int specifying the type of policy being created.
* @param value An any containing data with which to construct the
* <code>CORBA.Policy</code>.
* @return A <code>CORBA.Policy<code> object of the specified type and
* value.
*/
CORBA::Policy create_policy
(in CORBA::PolicyType type, in any value)
raises (CORBA::PolicyError);
};
/**
* Passed to each <code>ORBInitializer</code>, allowing it to
* to register interceptors and perform other duties while the ORB is
* initializing.
* <p>
* The <code>ORBInitInfo</code> object is only valid during
* <code>ORB.init</code>. If a service keeps a reference to its
* <code>ORBInitInfo</code> object and tries to use it after
* <code>ORB.init</code> returns, the object no longer exists and an
* <code>OBJECT_NOT_EXIST</code> exception shall be thrown.
*
* @see ORBInitializer
*/
local interface ORBInitInfo {
/** Object id, represented as a String */
typedef string ObjectId;
/**
* Only one Interceptor of a given name can be registered with the
* ORB for each Interceptor type. If an attempt is made to register a
* second Interceptor with the same name, DuplicateName is thrown.
* <p>
* An Interceptor may be anonymous, i.e., have an empty string as the
* name attribute. Any number of anonymous Interceptors may be
* registered with the ORB so, if the Interceptor being registered
* is anonymous, the registration operation will not throw
* <code>DuplicateName</code>.
*/
exception DuplicateName {
/**
* The name for which there was already an interceptor registered.
*/
string name;
};
/**
* This exception is thrown by
* <code>register_initial_reference</code> and
* <code>resolve_initial_references</code>.
* <code>register_initial_reference</code> throws <code>InvalidName</code>
* if:
* <ul>
* <li>this operation is called with an empty string id; or</li>
* <li>this operation is called with an id that is already registered,
* including the default names defined by OMG.</li>
* </ul>
* <code>resolve_initial_references</code> throws
* <code>InvalidName</code> if the name to be resolved is invalid.
*/
exception InvalidName {};
/**
* Returns the arguments passed to <code>ORB.init</code>. They may or
* may not contain the ORB's arguments.
*/
readonly attribute CORBA::StringSeq arguments;
/**
* Returns the ID of the ORB being initialized.
*/
readonly attribute string orb_id;
/**
* Returns the <code>IOP.CodecFactory</code>. The
* <code>CodecFactory</code> is normally obtained via a call to
* <code>ORB.resolve_initial_references( "CodecFactory" )</code>, but
* since the ORB is not yet available and Interceptors, particularly when
* processing service contexts, will require a <code>Codec</code>, a
* means of obtaining a <code>Codec</code> is necessary during ORB
* initialization.
*/
readonly attribute IOP::CodecFactory codec_factory;
/**
* Identical to <code>ORB.register_initial_reference</code>. This same
* functionality exists here because the ORB, not yet fully initialized,
* is not yet available but initial references may need to be
* registered as part of Interceptor registration. The only difference
* is that the version of this operation on the ORB uses PIDL
* (<code>CORBA.ORB.ObjectId</code>) and
* (<code>CORBA.ORB.InvalidName</code>) whereas the version in this
* interface uses IDL defined in this interface; the semantics are
* identical.
*/
void register_initial_reference (in ObjectId id, in Object obj)
raises (InvalidName);
// This was incorrectly returning void in orbos/99-12-02, correction
// from errata in orbos/00-01-01
/**
* Identical to <code>ORB.resolve_initial_references</code>. This same
* functionality exists here because the ORB, not yet fully initialized,
* is not yet available but initial references may be required from the
* ORB as part of Interceptor registration. The only difference is that
* the version of this operation on the ORB uses PIDL
* (<code>CORBA::ORB::ObjectId</code> and
* <code>CORBA::ORB::InvalidName</code>) whereas the version in this
* interface uses IDL defined in this interface; the semantics
* are identical.
* <p>
* This operation is only valid during post_init.
*/
Object resolve_initial_references (in ObjectId id) raises (InvalidName);
/**
* Used to add a client-side request Interceptor to the list of
* client-side request Interceptors.
*
* @param interceptor The <code>ClientRequestInterceptor</code> to be
* added.
* @exception DuplicateName thrown if a client-side request Interceptor
* has already been registered with this Interceptor's name.
*/
void add_client_request_interceptor
(in ClientRequestInterceptor interceptor)
raises (DuplicateName);
/**
* Used to add a server-side request Interceptor to the list of
* server-side request Interceptors.
*
* @param interceptor The ServerRequestInterceptor to be added.
* @exception DuplicateName thrown if a server-side request Interceptor
* has already been registered with this Interceptor's name
*/
void add_server_request_interceptor (
in ServerRequestInterceptor interceptor)
raises (DuplicateName);
/**
* Used to add an IOR Interceptor to the list of IOR Interceptors.
*
* @param interceptor The IORInterceptor to be added.
* @exception DuplicateName thrown if an IOR Interceptor has already
* been registered with this Interceptor's name.
*/
void add_ior_interceptor (in IORInterceptor interceptor)
raises (DuplicateName);
/**
* Called to allocate a slot on <code>PortableInterceptor.Current</code>.
* <p>
* Note that while slot id's can be allocated within an ORB initializer,
* the slots themselves cannot be initialized.
*
* @return The index to the slot which has been allocated.
* @exception BAD_INV_ORDER thrown, with a standard minor code of 14, if
* <code>set_slot</code> or <code>get_slot</code> is called on the
* <code>PICurrent</code> within an ORB initializer.
* @see Current
*/
SlotId allocate_slot_id ();
/**
* Registers a <code>PolicyFactory</code> for the given
* <code>PolicyType</code>.
*
* @param type The policy type that the given <code>PolicyFactory</code>
* serves.
* @param policy_factory The factory for the given policy type.
* @exception BAD_INV_ORDER thrown, with a standard minor code of 16, if
* a <code>PolicyFactory</code> already exists for the given
* <code>PolicyType</code>.
*/
void register_policy_factory (
in CORBA::PolicyType type,
in PolicyFactory policy_factory);
};
/**
* Facilitates interceptor registration and ORB initialization.
* <p>
* Interceptors are intended to be a means by which ORB services gain
* access to ORB processing, effectively becoming part of the ORB.
* Since Interceptors are part of the ORB, when <code>ORB.init</code>
* returns an ORB, the Interceptors shall have been registered.
* Interceptors cannot be registered on an ORB after it has been
* returned by a call to <code>ORB.init</code>.
* <p>
* An Interceptor is registered by registering an associated
* <code>ORBInitializer</code> object which implements the
* <code>ORBInitializer</code> interface. When an ORB is initializing,
* it shall call each registered <code>ORBInitializer</code>, passing it
* an <code>ORBInitInfo</code> object which is used to register its
* Interceptor.
* <p>
* <b>Registering ORB Initializers in Java</b>
* <p>
* ORBInitializers are registered via Java ORB properties.
* <p>
* The property names are of the form:
* <blockquote><code>
* org.omg.PortableInterceptor.ORBInitializerClass.<Service>
* </code></blockquote>
* where <code><Service></code> is the string name of a class
* which implements
* <blockquote><code>
* org.omg.PortableInterceptor.ORBInitializer
* </code></blockquote>
* To avoid name collisions, the reverse DNS name convention should be
* used. For example, if company X has three initializers, it could define
* the following properties:
* <ul>
* <li><code>
* org.omg.PortableInterceptor.ORBInitializerClass.com.x.Init1
* </code></li>
* <li><code>
* org.omg.PortableInterceptor.ORBInitializerClass.com.x.Init2
* </code></li>
* <li><code>
* org.omg.PortableInterceptor.ORBInitializerClass.com.x.Init3
* </code></li>
* </ul>
* During ORB.init, these ORB properties which begin with
* <code>org.omg.PortableInterceptor.ORBInitializerClass</code> shall be
* collected, the <code><Service></code> portion of each property
* shall be extracted, an object shall be instantiated with the
* <code><Service></code> string as its class name, and the
* <code>pre_init</code> and <code>post_init</code> methods shall be
* called on that object. If there are any exceptions, the ORB shall
* ignore them and proceed.
* <p>
* <b><i>Example</i></b>
* <p>
* A client-side logging service written by company X, for example, may
* have the following ORBInitializer implementation:
* <code><pre>
* package com.x.logging;
*
* import org.omg.PortableInterceptor.Interceptor;
* import org.omg.PortableInterceptor.ORBInitializer;
* import org.omg.PortableInterceptor.ORBInitInfo;
*
* public class LoggingService implements ORBInitializer {
* void pre_init( ORBInitInfo info ) {
* // Instantiate the Logging Service s Interceptor.
* Interceptor interceptor = new LoggingInterceptor();
*
* // Register the Logging Service s Interceptor.
* info.add_client_request_interceptor( interceptor );
* }
*
* void post_init( ORBInitInfo info ) {
* // This service does not need two init points.
* }
* }
* </pre></code>
* To run a program called <code>MyApp</code> using this logging
* service, the user could type:
* <blockquote><code>
* java
*-Dorg.omg.PortableInterceptor.ORBInitializerClass.com.x.Logging.LoggingService
* MyApp
* </code></blockquote>
* <p>
* <b>Notes about Registering Interceptors</b>
* <p>
* Request Interceptors are registered on a per-ORB basis.
* <p>
* To achieve virtual per-object Interceptors, query the policies on the
* target from within the interception points to determine whether they
* should do any work.
* <p>
* To achieve virtual per-POA Interceptors, instantiate each POA with a
* different ORB. While Interceptors may be ordered administratively,
* there is no concept of order with respect to the registration of
* Interceptors. Request Interceptors are concerned with service contexts.
* Service contexts have no order, so there is no purpose for request
* Interceptors to have an order. IOR Interceptors are concerned with
* tagged components. Tagged components also have no order, so there
* is no purpose for IOR Interceptors to have an order.
* <p>
* Registration code should avoid using the ORB (i.e., calling
* <code>ORB.init</code> with the provided <code>orb_id</code>). Since
* registration occurs during ORB initialization, results of invocations
* on this ORB while it is in this state are undefined.
*
* @see ORBInitInfo
*/
local interface ORBInitializer {
/**
* Called during ORB initialization. If it is expected that initial
* services registered by an interceptor will be used by other
* interceptors, then those initial services shall be registered at
* this point via calls to
* <code>ORBInitInfo.register_initial_reference</code>.
*
* @param info provides initialization attributes and operations by
* which Interceptors can be registered.
*/
void pre_init (in ORBInitInfo info);
/**
* Called during ORB initialization. If a service must resolve initial
* references as part of its initialization, it can assume that all
* initial references will be available at this point.
* <p>
* Calling the <code>post_init</code> operations is not the final
* task of ORB initialization. The final task, following the
* <code>post_init</code> calls, is attaching the lists of registered
* interceptors to the ORB. Therefore, the ORB does not contain the
* interceptors during calls to <code>post_init</code>. If an
* ORB-mediated call is made from within <code>post_init</code>, no
* request interceptors will be invoked on that call.
* Likewise, if an operation is performed which causes an IOR to be
* created, no IOR interceptors will be invoked.
*
* @param info provides initialization attributes and
* operations by which Interceptors can be registered.
*/
void post_init (in ORBInitInfo info);
};
};