8075054: Mixed case Windows path break native dependency checks
Reviewed-by: erikj
#
# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation. Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
# When you read this source. Remember that $(sort ...) has the side effect
# of removing duplicates. It is actually this side effect that is
# desired whenever sort is used below!
ifndef _NATIVE_COMPILATION_GMK
_NATIVE_COMPILATION_GMK := 1
ifeq (,$(_MAKEBASE_GMK))
$(error You must include MakeBase.gmk prior to including NativeCompilation.gmk)
endif
# Extensions of files handled by this macro.
NATIVE_SOURCE_EXTENSIONS := %.s %.c %.cpp %.m %.mm
# Replaces native source extensions with the object file extension in a string.
# Param 1: the string containing source file names with extensions
# The surrounding strip is needed to keep additional whitespace out
define replace_with_obj_extension
$(strip \
$(foreach extension, $(NATIVE_SOURCE_EXTENSIONS), \
$(patsubst $(extension),%$(OBJ_SUFFIX),$(filter $(extension),$1))) \
)
endef
ifeq ($(OPENJDK_BUILD_OS_ENV), windows.cygwin)
UNIX_PATH_PREFIX := /cygdrive
else ifeq ($(OPENJDK_BUILD_OS_ENV), windows.msys)
UNIX_PATH_PREFIX :=
endif
# This pattern is used to transform the output of the microsoft CL compiler
# into a make syntax dependency file (.d)
WINDOWS_SHOWINCLUDE_SED_PATTERN := \
-e '/^Note: including file:/!d' \
-e 's|Note: including file: *||' \
-e 's|\\|/|g' \
-e 's|^\([a-zA-Z]\):|$(UNIX_PATH_PREFIX)/\1|g' \
-e '\|$(TOPDIR)|I !d' \
-e 's|$$$$| \\|g' \
#
# This pattern is used to transform a dependency file (.d) to a list
# of make targets for dependent files (.d.targets)
DEPENDENCY_TARGET_SED_PATTERN := \
-e 's/\#.*//' \
-e 's/^[^:]*: *//' \
-e 's/ *\\$$$$//' \
-e '/^$$$$/ d' \
-e 's/$$$$/ :/' \
#
define add_native_source
# param 1 = BUILD_MYPACKAGE
# parma 2 = the source file name (..../alfa.c or .../beta.cpp)
# param 3 = the bin dir that stores all .o (.obj) and .d files.
# param 4 = the c flags to the compiler
# param 5 = the c compiler
# param 6 = the c++ flags to the compiler
# param 7 = the c++ compiler
# param 8 = the flags to the assembler
ifneq (,$$(filter %.c,$2))
# Compile as a C file
$1_$2_FLAGS=$(CFLAGS_CCACHE) $4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
$1_$2_COMP=$5
$1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
else ifneq (,$$(filter %.m,$2))
# Compile as an Objective-C file
$1_$2_FLAGS=-x objective-c $(CFLAGS_CCACHE) $4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
$1_$2_COMP=$5
$1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
else ifneq (,$$(filter %.s,$2))
# Compile as assembler file
$1_$2_FLAGS=$8 -DTHIS_FILE='"$$(<F)"'
$1_$2_COMP=$(AS)
$1_$2_DEP_FLAG:=
else ifneq (,$$(filter %.cpp,$2)$$(filter %.mm,$2))
# Compile as a C++ or Objective-C++ file
$1_$2_FLAGS=$(CFLAGS_CCACHE) $6 $$($1_$(notdir $2)_CXXFLAGS) -DTHIS_FILE='"$$(<F)"' -c
$1_$2_COMP=$7
$1_$2_DEP_FLAG:=$(CXX_FLAG_DEPS)
else
$$(error Internal error in NativeCompilation.gmk: no compiler for file $2)
endif
# Generate the .o (.obj) file name and place it in the bin dir.
$1_$2_OBJ := $3/$$(call replace_with_obj_extension, $$(notdir $2))
# Only continue if this object file hasn't been processed already. This lets the first found
# source file override any other with the same name.
ifeq (,$$(findstring $$($1_$2_OBJ),$$($1_ALL_OBJS)))
$1_ALL_OBJS+=$$($1_$2_OBJ)
ifeq (,$$(filter %.s,$2))
# And this is the dependency file for this obj file.
$1_$2_DEP:=$$(patsubst %$(OBJ_SUFFIX),%.d,$$($1_$2_OBJ))
# The dependency target file lists all dependencies as empty targets
# to avoid make error "No rule to make target" for removed files
$1_$2_DEP_TARGETS:=$$(patsubst %$(OBJ_SUFFIX),%.d.targets,$$($1_$2_OBJ))
# Include previously generated dependency information. (if it exists)
-include $$($1_$2_DEP)
-include $$($1_$2_DEP_TARGETS)
ifeq ($(TOOLCHAIN_TYPE), microsoft)
$1_$2_DEBUG_OUT_FLAGS:=-Fd$$(patsubst %$(OBJ_SUFFIX),%.pdb,$$($1_$2_OBJ)) \
-Fm$$(patsubst %$(OBJ_SUFFIX),%.map,$$($1_$2_OBJ))
endif
endif
$$($1_$2_OBJ) : $2 $$($1_COMPILE_VARDEPS_FILE) | $$($1_BUILD_INFO)
$(ECHO) $(LOG_INFO) "Compiling $$(notdir $2) (for $$(notdir $$($1_TARGET)))"
ifneq ($(TOOLCHAIN_TYPE), microsoft)
# The Solaris studio compiler doesn't output the full path to the object file in the
# generated deps files. Fixing it with sed. If compiling assembly, don't try this.
ifeq ($(TOOLCHAIN_TYPE)$$(filter %.s,$2), solstudio)
$$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEP_FLAG) $$($1_$2_DEP).tmp $(CC_OUT_OPTION)$$($1_$2_OBJ) $2
$(SED) 's|^$$(@F):|$$@:|' $$($1_$2_DEP).tmp > $$($1_$2_DEP)
else
$$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEP_FLAG) $$($1_$2_DEP) $(CC_OUT_OPTION)$$($1_$2_OBJ) $2
endif
endif
# The Visual Studio compiler lacks a feature for generating make dependencies, but by
# setting -showIncludes, all included files are printed. These are filtered out and
# parsed into make dependences.
ifeq ($(TOOLCHAIN_TYPE), microsoft)
($$($1_$2_COMP) $$($1_$2_FLAGS) -showIncludes $$($1_$2_DEBUG_OUT_FLAGS) \
$(CC_OUT_OPTION)$$($1_$2_OBJ) $2 ; echo $$$$? > $$($1_$2_DEP).exitvalue) \
| $(TEE) $$($1_$2_DEP).raw | $(GREP) -v -e "^Note: including file:" \
-e "^$(notdir $2)$$$$" || test "$$$$?" = "1" ; \
exit `cat $$($1_$2_DEP).exitvalue`
$(RM) $$($1_$2_DEP).exitvalue
($(ECHO) $$@: \\ \
&& $(SED) $(WINDOWS_SHOWINCLUDE_SED_PATTERN) $$($1_$2_DEP).raw) | $(SORT) -u > $$($1_$2_DEP)
endif
# Create a dependency target file from the dependency file.
# Solution suggested by http://make.mad-scientist.net/papers/advanced-auto-dependency-generation/
ifneq ($$($1_$2_DEP),)
$(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_$2_DEP) > $$($1_$2_DEP_TARGETS)
endif
endif
endef
# Setup make rules for creating a native binary (a shared library or an
# executable).
#
# Parameter 1 is the name of the rule. This name is used as variable prefix,
# and the targets generated are listed in a variable by that name.
#
# Remaining parameters are named arguments. These include:
# SRC one or more directory roots to scan for C/C++ files.
# LANG C or C++
# CFLAGS the compiler flags to be used, used both for C and C++.
# CXXFLAGS the compiler flags to be used for c++, if set overrides CFLAGS.
# LDFLAGS the linker flags to be used, used both for C and C++.
# LDFLAGS_SUFFIX the linker flags to be added last on the commandline
# typically the libraries linked to.
# ARFLAGS the archiver flags to be used
# OBJECT_DIR the directory where we store the object files
# LIBRARY the resulting library file
# PROGRAM the resulting exec file
# INCLUDES only pick source from these directories
# EXCLUDES do not pick source from these directories
# INCLUDE_FILES only compile exactly these files!
# EXCLUDE_FILES with these names
# EXTRA_FILES List of extra files not in any of the SRC dirs
# VERSIONINFO_RESOURCE Input file for RC. Setting this implies that RC will be run
# RC_FLAGS flags for RC.
# MAPFILE mapfile
# REORDER reorder file
# DEBUG_SYMBOLS add debug symbols (if configured on)
# CC the compiler to use, default is $(CC)
# LDEXE the linker to use for linking executables, default is $(LDEXE)
# OPTIMIZATION sets optimization level to NONE, LOW, HIGH, HIGHEST
# DISABLED_WARNINGS_<toolchain> Disable the given warnings for the specified toolchain
SetupNativeCompilation = $(NamedParamsMacroTemplate)
define SetupNativeCompilationBody
ifneq (,$$($1_BIN))
$$(error BIN has been replaced with OBJECT_DIR)
endif
ifneq (,$$($1_LIB))
$$(error LIB has been replaced with LIBRARY)
endif
ifneq (,$$($1_EXE))
$$(error EXE has been replaced with PROGRAM)
endif
ifneq (,$$($1_LIBRARY))
ifeq (,$$($1_OUTPUT_DIR))
$$(error LIBRARY requires OUTPUT_DIR)
endif
ifneq ($$($1_LIBRARY),$(basename $$($1_LIBRARY)))
$$(error directory of LIBRARY should be specified using OUTPUT_DIR)
endif
ifneq (,$(findstring $(SHARED_LIBRARY_SUFFIX),$$($1_LIBRARY)))
$$(error LIBRARY should be specified without SHARED_LIBRARY_SUFFIX: $(SHARED_LIBRARY_SUFFIX))
endif
ifneq (,$(findstring $(LIBRARY_PREFIX),$$($1_LIBRARY)))
$$(error LIBRARY should be specified without LIBRARY_PREFIX: $(LIBRARY_PREFIX))
endif
ifeq ($$($1_SUFFIX), )
$1_SUFFIX := $(SHARED_LIBRARY_SUFFIX)
endif
$1_BASENAME:=$(LIBRARY_PREFIX)$$($1_LIBRARY)$$($1_SUFFIX)
$1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME)
$1_NOSUFFIX:=$(LIBRARY_PREFIX)$$($1_LIBRARY)
endif
ifneq (,$$($1_STATIC_LIBRARY))
ifeq (,$$($1_OUTPUT_DIR))
$$(error STATIC_LIBRARY requires OUTPUT_DIR)
endif
ifneq ($$($1_STATIC_LIBRARY),$(basename $$($1_STATIC_LIBRARY)))
$$(error directory of STATIC_LIBRARY should be specified using OUTPUT_DIR)
endif
ifneq (,$(findstring $(STATIC_LIBRARY_SUFFIX),$$($1_STATIC_LIBRARY)))
$$(error STATIC_LIBRARY should be specified without STATIC_LIBRARY_SUFFIX: $(STATIC_LIBRARY_SUFFIX))
endif
ifneq (,$(findstring $(LIBRARY_PREFIX),$$($1_STATIC_LIBRARY)))
$$(error STATIC_LIBRARY should be specified without LIBRARY_PREFIX: $(LIBRARY_PREFIX))
endif
ifeq ($$($1_SUFFIX), )
$1_SUFFIX := $(STATIC_LIBRARY_SUFFIX)
endif
$1_BASENAME:=$(LIBRARY_PREFIX)$$($1_STATIC_LIBRARY)$$($1_SUFFIX)
$1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME)
$1_NOSUFFIX:=$(LIBRARY_PREFIX)$$($1_STATIC_LIBRARY)
endif
ifneq (,$$($1_PROGRAM))
ifeq (,$$($1_OUTPUT_DIR))
$$(error PROGRAM requires OUTPUT_DIR)
endif
ifneq ($$($1_PROGRAM),$(basename $$($1_PROGRAM)))
$$(error directory of PROGRAM should be specified using OUTPUT_DIR)
endif
ifneq (,$(findstring $(EXE_SUFFIX),$$($1_PROGRAM)))
$$(error PROGRAM should be specified without EXE_SUFFIX: $(EXE_SUFFIX))
endif
ifeq ($$($1_SUFFIX), )
$1_SUFFIX := $(EXE_SUFFIX)
endif
$1_BASENAME:=$$($1_PROGRAM)$$($1_SUFFIX)
$1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME)
$1_NOSUFFIX:=$$($1_PROGRAM)
endif
ifeq (,$$($1_TARGET))
$$(error Neither PROGRAM, LIBRARY nor STATIC_LIBRARY has been specified for SetupNativeCompilation)
endif
ifeq (,$$($1_LANG))
$$(error You have to specify LANG for native compilation $1)
endif
ifeq (C,$$($1_LANG))
ifeq ($$($1_LDEXE),)
$1_LDEXE:=$(LDEXE)
endif
ifeq ($$($1_LD),)
$1_LD:=$(LD)
endif
else
ifeq (C++,$$($1_LANG))
ifeq ($$($1_LD),)
$1_LD:=$(LDCXX)
endif
ifeq ($$($1_LDEXE),)
$1_LDEXE:=$(LDEXECXX)
endif
else
$$(error Unknown native language $$($1_LANG) for $1)
endif
endif
ifeq ($$($1_CC),)
$1_CC:=$(CC)
endif
ifeq ($$($1_CXX),)
$1_CXX:=$(CXX)
endif
# Make sure the dirs exist.
$$(call MakeDir,$$($1_OBJECT_DIR) $$($1_OUTPUT_DIR))
$$(foreach d,$$($1_SRC), $$(if $$(wildcard $$d),,$$(error SRC specified to SetupNativeCompilation $1 contains missing directory $$d)))
# Find all files in the source trees. Sort to remove duplicates.
$1_ALL_SRCS := $$(sort $$(call CacheFind,$$($1_SRC)))
# Extract the C/C++ files.
$1_EXCLUDE_FILES:=$$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$($1_EXCLUDE_FILES)))
$1_INCLUDE_FILES:=$$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$($1_INCLUDE_FILES)))
ifneq ($$($1_EXCLUDE_FILES),)
$1_EXCLUDE_FILES:=$$(addprefix %,$$($1_EXCLUDE_FILES))
endif
$1_SRCS := $$(filter-out $$($1_EXCLUDE_FILES),$$(filter $$(NATIVE_SOURCE_EXTENSIONS),$$($1_ALL_SRCS)))
ifneq (,$$(strip $$($1_INCLUDE_FILES)))
$1_SRCS := $$(filter $$($1_INCLUDE_FILES),$$($1_SRCS))
endif
ifeq (,$$($1_SRCS))
$$(error No sources found for $1 when looking inside the dirs $$($1_SRC))
endif
# There can be only a single bin dir root, no need to foreach over the roots.
$1_BINS := $$(wildcard $$($1_OBJECT_DIR)/*$(OBJ_SUFFIX))
# Now we have a list of all c/c++ files to compile: $$($1_SRCS)
# and we have a list of all existing object files: $$($1_BINS)
# Prepend the source/bin path to the filter expressions. Then do the filtering.
ifneq ($$($1_INCLUDES),)
$1_SRC_INCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_INCLUDES))))
$1_SRCS := $$(filter $$($1_SRC_INCLUDES),$$($1_SRCS))
endif
ifneq ($$($1_EXCLUDES),)
$1_SRC_EXCLUDES := $$(addsuffix /%,$$($1_EXCLUDES))
$1_SRC_EXCLUDES += $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_EXCLUDES))))
$1_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_SRCS))
endif
$1_SRCS += $$($1_EXTRA_FILES)
# Calculate the expected output from compiling the sources (sort to remove duplicates. Also provides
# a reproducable order on the input files to the linker).
$1_EXPECTED_OBJS_FILENAMES := $$(call replace_with_obj_extension, $$(notdir $$($1_SRCS)))
$1_EXPECTED_OBJS:=$$(sort $$(addprefix $$($1_OBJECT_DIR)/,$$($1_EXPECTED_OBJS_FILENAMES)))
# Are there too many object files on disk? Perhaps because some source file was removed?
$1_SUPERFLOUS_OBJS:=$$(sort $$(filter-out $$($1_EXPECTED_OBJS),$$($1_BINS)))
# Clean out the superfluous object files.
ifneq ($$($1_SUPERFLUOUS_OBJS),)
$$(shell $(RM) -f $$($1_SUPERFLUOUS_OBJS))
endif
# Pickup extra OPENJDK_TARGET_OS_TYPE and/or OPENJDK_TARGET_OS dependent variables for CFLAGS.
$1_EXTRA_CFLAGS:=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_TYPE)) $$($1_CFLAGS_$(OPENJDK_TARGET_OS))
ifneq ($(DEBUG_LEVEL),release)
# Pickup extra debug dependent variables for CFLAGS
$1_EXTRA_CFLAGS+=$$($1_CFLAGS_debug)
$1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_TYPE)_debug)
$1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS)_debug)
else
$1_EXTRA_CFLAGS+=$$($1_CFLAGS_release)
$1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_TYPE)_release)
$1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS)_release)
endif
# Pickup extra OPENJDK_TARGET_OS_TYPE and/or OPENJDK_TARGET_OS dependent variables for CXXFLAGS.
$1_EXTRA_CXXFLAGS:=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_TYPE)) $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS))
ifneq ($(DEBUG_LEVEL),release)
# Pickup extra debug dependent variables for CXXFLAGS
$1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_debug)
$1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_TYPE)_debug)
$1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_debug)
else
$1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_release)
$1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_TYPE)_release)
$1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_release)
endif
# Pick up disabled warnings, if possible on this platform.
ifneq ($(DISABLE_WARNING_PREFIX),)
$1_EXTRA_CFLAGS += $$(addprefix $(DISABLE_WARNING_PREFIX), $$($1_DISABLED_WARNINGS_$(TOOLCHAIN_TYPE)))
$1_EXTRA_CXXFLAGS += $$(addprefix $(DISABLE_WARNING_PREFIX), $$($1_DISABLED_WARNINGS_$(TOOLCHAIN_TYPE)))
endif
ifeq ($$($1_DEBUG_SYMBOLS), true)
ifeq ($(ENABLE_DEBUG_SYMBOLS), true)
ifdef OPENJDK
# Always add debug symbols
$1_EXTRA_CFLAGS+=$(CFLAGS_DEBUG_SYMBOLS)
$1_EXTRA_CXXFLAGS+=$(CXXFLAGS_DEBUG_SYMBOLS)
else
# Programs don't get the debug symbols added in the old build. It's not clear if
# this is intentional.
ifeq ($$($1_PROGRAM),)
$1_EXTRA_CFLAGS+=$(CFLAGS_DEBUG_SYMBOLS)
$1_EXTRA_CXXFLAGS+=$(CXXFLAGS_DEBUG_SYMBOLS)
endif
endif
endif
endif
ifeq ($$($1_CXXFLAGS),)
$1_CXXFLAGS:=$$($1_CFLAGS)
endif
ifeq ($$(strip $$($1_EXTRA_CXXFLAGS)),)
$1_EXTRA_CXXFLAGS:=$$($1_EXTRA_CFLAGS)
endif
ifneq (,$$($1_REORDER))
$1_EXTRA_CFLAGS += $$(C_FLAG_REORDER)
$1_EXTRA_CXXFLAGS += $$(CXX_FLAG_REORDER)
endif
ifeq (NONE, $$($1_OPTIMIZATION))
$1_EXTRA_CFLAGS += $(C_O_FLAG_NONE)
$1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_NONE)
else ifeq (LOW, $$($1_OPTIMIZATION))
$1_EXTRA_CFLAGS += $(C_O_FLAG_NORM)
$1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_NORM)
else ifeq (HIGH, $$($1_OPTIMIZATION))
$1_EXTRA_CFLAGS += $(C_O_FLAG_HI)
$1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_HI)
else ifeq (HIGHEST, $$($1_OPTIMIZATION))
$1_EXTRA_CFLAGS += $(C_O_FLAG_HIGHEST)
$1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_HIGHEST)
else ifneq (, $$($1_OPTIMIZATION))
$$(error Unknown value for OPTIMIZATION: $$($1_OPTIMIZATION))
endif
$1_BUILD_INFO := $$($1_OBJECT_DIR)/_build-info.marker
# Track variable changes for all variables that affect the compilation command
# lines for all object files in this setup. This includes at least all the
# variables used in the call to add_native_source below.
$1_COMPILE_VARDEPS := $$($1_CFLAGS) $$($1_EXTRA_CFLAGS) $(SYSROOT_CFLAGS) \
$$($1_CXXFLAGS) $$($1_EXTRA_CXXFLAGS) \
$$($1_CC) $$($1_CXX) $$($1_ASFLAGS) \
$$(foreach s, $$($1_SRCS), \
$$($1_$$(notdir $$s)_CFLAGS) $$($1_$$(notdir $$s)_CXXFLAGS))
$1_COMPILE_VARDEPS_FILE := $$(call DependOnVariable, $1_COMPILE_VARDEPS, \
$$($1_OBJECT_DIR)/$$($1_NOSUFFIX).comp.vardeps)
# Now call add_native_source for each source file we are going to compile.
$$(foreach p,$$($1_SRCS), \
$$(eval $$(call add_native_source,$1,$$p,$$($1_OBJECT_DIR), \
$$($1_CFLAGS) $$($1_EXTRA_CFLAGS) $(SYSROOT_CFLAGS), \
$$($1_CC), \
$$($1_CXXFLAGS) $$($1_EXTRA_CXXFLAGS) $(SYSROOT_CFLAGS), \
$$($1_CXX), $$($1_ASFLAGS))))
# Setup rule for printing progress info when compiling source files.
# This is a rough heuristic and may not always print accurate information.
$$($1_BUILD_INFO): $$($1_SRCS) $$($1_COMPILE_VARDEPS_FILE)
ifeq ($$(wildcard $$($1_TARGET)),)
$(ECHO) 'Creating $$($1_BASENAME) from $$(words $$(filter-out %.vardeps, $$?)) file(s)'
else
$(ECHO) $$(strip 'Updating $$($1_BASENAME)' \
$$(if $$(filter-out %.vardeps, $$?), \
'from $$(words $$(filter-out %.vardeps, $$?)) file(s)') \
$$(if $$(filter %.vardeps, $$?), 'due to makefile changes'))
endif
$(TOUCH) $$@
# On windows we need to create a resource file
ifeq ($(OPENJDK_TARGET_OS), windows)
ifneq (,$$($1_VERSIONINFO_RESOURCE))
$1_RES:=$$($1_OBJECT_DIR)/$$($1_BASENAME).res
$1_RES_DEP:=$$($1_RES).d
$1_RES_DEP_TARGETS:=$$($1_RES).d.targets
-include $$($1_RES_DEP)
-include $$($1_RES_DEP_TARGETS)
$1_RES_VARDEPS := $(RC) $$($1_RC_FLAGS)
$1_RES_VARDEPS_FILE := $$(call DependOnVariable, $1_RES_VARDEPS, \
$$($1_RES).vardeps)
$$($1_RES): $$($1_VERSIONINFO_RESOURCE) $$($1_RES_VARDEPS_FILE)
$(ECHO) $(LOG_INFO) "Compiling resource $$(notdir $$($1_VERSIONINFO_RESOURCE)) (for $$(notdir $$($1_TARGET)))"
$(RC) $$($1_RC_FLAGS) $(SYSROOT_CFLAGS) $(CC_OUT_OPTION)$$@ \
$$($1_VERSIONINFO_RESOURCE)
# Windows RC compiler does not support -showIncludes, so we mis-use CL for this.
$(CC) $$($1_RC_FLAGS) $(SYSROOT_CFLAGS) -showIncludes -nologo -TC \
$(CC_OUT_OPTION)$$($1_RES_DEP).obj $$($1_VERSIONINFO_RESOURCE) > $$($1_RES_DEP).raw 2>&1 || exit 0
($(ECHO) $$($1_RES): \\ \
&& $(SED) $(WINDOWS_SHOWINCLUDE_SED_PATTERN) $$($1_RES_DEP).raw) > $$($1_RES_DEP)
$(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_RES_DEP) > $$($1_RES_DEP_TARGETS)
endif
ifneq (,$$($1_MANIFEST))
$1_GEN_MANIFEST:=$$($1_OBJECT_DIR)/$$($1_PROGRAM).manifest
IMVERSIONVALUE:=$(JDK_MINOR_VERSION).$(JDK_MICRO_VERSION).$(JDK_UPDATE_VERSION).$(COOKED_BUILD_NUMBER)
$1_MANIFEST_VARDEPS_FILE := $$(call DependOnVariable, IMVERSIONVALUE, \
$$($1_GEN_MANIFEST).vardeps)
$$($1_GEN_MANIFEST): $$($1_MANIFEST) $$($1_MANIFEST_VARDEPS_FILE)
$(SED) 's%IMVERSION%$$(IMVERSIONVALUE)%g;s%PROGRAM%$$($1_PROGRAM)%g' $$< > $$@
endif
endif
# mapfile doesnt seem to be implemented on macosx (yet??)
ifneq ($(OPENJDK_TARGET_OS),macosx)
ifneq ($(OPENJDK_TARGET_OS),windows)
$1_REAL_MAPFILE:=$$($1_MAPFILE)
ifneq (,$$($1_REORDER))
$1_REAL_MAPFILE:=$$($1_OBJECT_DIR)/mapfile
$$($1_REAL_MAPFILE) : $$($1_MAPFILE) $$($1_REORDER)
$$(MKDIR) -p $$(@D)
$$(CP) $$($1_MAPFILE) $$@.tmp
$$(SED) -e 's=OUTPUTDIR=$$($1_OBJECT_DIR)=' $$($1_REORDER) >> $$@.tmp
$$(MV) $$@.tmp $$@
endif
endif
endif
# Pickup extra OPENJDK_TARGET_OS_TYPE and/or OPENJDK_TARGET_OS dependent variables
# for LDFLAGS and LDFLAGS_SUFFIX
$1_EXTRA_LDFLAGS:=$$($1_LDFLAGS_$(OPENJDK_TARGET_OS_TYPE)) $$($1_LDFLAGS_$(OPENJDK_TARGET_OS))
$1_EXTRA_LDFLAGS_SUFFIX:=$$($1_LDFLAGS_SUFFIX_$(OPENJDK_TARGET_OS_TYPE)) $$($1_LDFLAGS_SUFFIX_$(OPENJDK_TARGET_OS))
ifneq (,$$($1_REAL_MAPFILE))
$1_EXTRA_LDFLAGS += $(call SET_SHARED_LIBRARY_MAPFILE,$$($1_REAL_MAPFILE))
endif
# Need to make sure TARGET is first on list
$1 := $$($1_TARGET)
ifeq ($$($1_STATIC_LIBRARY),)
ifeq ($$($1_DEBUG_SYMBOLS), true)
ifeq ($(ENABLE_DEBUG_SYMBOLS), true)
ifneq ($(OPENJDK_TARGET_OS), macosx) # no MacOS X support yet
ifneq ($$($1_OUTPUT_DIR),$$($1_OBJECT_DIR))
# The dependency on TARGET is needed on windows for debuginfo files
# to be rebuilt properly.
$$($1_OUTPUT_DIR)/% : $$($1_OBJECT_DIR)/% $$($1_TARGET)
$(CP) $$< $$@
endif
# Generate debuginfo files.
ifeq ($(OPENJDK_TARGET_OS), windows)
$1_EXTRA_LDFLAGS += "-pdb:$$($1_OBJECT_DIR)/$$($1_NOSUFFIX).pdb" \
"-map:$$($1_OBJECT_DIR)/$$($1_NOSUFFIX).map"
$1_DEBUGINFO_FILES := $$($1_OBJECT_DIR)/$$($1_NOSUFFIX).pdb \
$$($1_OBJECT_DIR)/$$($1_NOSUFFIX).map
else ifeq ($(OPENJDK_TARGET_OS), solaris)
$1_DEBUGINFO_FILES := $$($1_OBJECT_DIR)/$$($1_NOSUFFIX).debuginfo
# Setup the command line creating debuginfo files, to be run after linking.
# It cannot be run separately since it updates the original target file
#
# gobjcopy crashes on "empty" section headers with the SHF_ALLOC flag set.
# Use $(FIX_EMPTY_SEC_HDR_FLAGS) to clear the SHF_ALLOC flag (if set) from
# empty section headers until a fixed $(OBJCOPY) is available.
# An empty section header has sh_addr == 0 and sh_size == 0.
# This problem has only been seen on Solaris X64, but we call this tool
# on all Solaris builds just in case.
#
# $(OBJCOPY) --add-gnu-debuglink=... corrupts SUNW_* sections.
# Use $(ADD_GNU_DEBUGLINK) until a fixed $(OBJCOPY) is available.
$1_CREATE_DEBUGINFO_CMDS := \
$(FIX_EMPTY_SEC_HDR_FLAGS) $(LOG_INFO) $$($1_TARGET) $$(NEWLINE) \
$(OBJCOPY) --only-keep-debug $$($1_TARGET) $$($1_DEBUGINFO_FILES) $$(NEWLINE) \
$(CD) $$($1_OUTPUT_DIR) && \
$(ADD_GNU_DEBUGLINK) $(LOG_INFO) $$($1_DEBUGINFO_FILES) $$($1_TARGET)
$1_DEBUGINFO_EXTRA_DEPS := $(FIX_EMPTY_SEC_HDR_FLAGS) $(ADD_GNU_DEBUGLINK)
else ifeq ($(OPENJDK_TARGET_OS), linux)
$1_DEBUGINFO_FILES := $$($1_OBJECT_DIR)/$$($1_NOSUFFIX).debuginfo
# Setup the command line creating debuginfo files, to be run after linking.
# It cannot be run separately since it updates the original target file
$1_CREATE_DEBUGINFO_CMDS := \
$(OBJCOPY) --only-keep-debug $$($1_TARGET) $$($1_DEBUGINFO_FILES) $$(NEWLINE) \
$(CD) $$($1_OUTPUT_DIR) && \
$(OBJCOPY) --add-gnu-debuglink=$$($1_DEBUGINFO_FILES) $$($1_TARGET)
endif # No MacOS X support
# This dependency dance ensures that debug info files get rebuilt
# properly if deleted.
$$($1_TARGET): $$($1_DEBUGINFO_FILES)
$$($1_DEBUGINFO_FILES): $$($1_EXPECTED_OBJS)
ifeq ($(ZIP_DEBUGINFO_FILES), true)
$1_DEBUGINFO_ZIP := $$($1_OBJECT_DIR)/$$($1_NOSUFFIX).diz
$1 += $$(subst $$($1_OBJECT_DIR),$$($1_OUTPUT_DIR),$$($1_DEBUGINFO_ZIP))
# The dependency on TARGET is needed for debuginfo files
# to be rebuilt properly.
$$($1_DEBUGINFO_ZIP): $$($1_DEBUGINFO_FILES) $$($1_TARGET)
$(CD) $$($1_OBJECT_DIR) \
&& $(ZIP) -q $$@ $$(notdir $$($1_DEBUGINFO_FILES))
else
$1 += $$(subst $$($1_OBJECT_DIR),$$($1_OUTPUT_DIR),$$($1_DEBUGINFO_FILES))
endif
endif
endif # !MacOS X
endif # $1_DEBUG_SYMBOLS
endif # !STATIC_LIBRARY
ifneq (,$$($1_LIBRARY))
# Generating a dynamic library.
$1_EXTRA_LDFLAGS += $$(call SET_SHARED_LIBRARY_NAME,$$($1_BASENAME))
ifeq ($(OPENJDK_TARGET_OS), windows)
$1_EXTRA_LDFLAGS += "-implib:$$($1_OBJECT_DIR)/$$($1_LIBRARY).lib"
endif
$1_EXTRA_LDFLAGS_SUFFIX += $(GLOBAL_LDFLAGS_SUFFIX)
$1_VARDEPS := $$($1_LD) $(SYSROOT_LDFLAGS) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) \
$$($1_LDFLAGS_SUFFIX) $$($1_EXTRA_LDFLAGS_SUFFIX)
$1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, \
$$($1_OBJECT_DIR)/$$($1_NOSUFFIX).vardeps)
$$($1_TARGET): $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_REAL_MAPFILE) \
$$($1_DEBUGINFO_EXTRA_DEPS) $$($1_VARDEPS_FILE)
$(ECHO) $(LOG_INFO) "Linking $$($1_BASENAME)"
$$($1_LD) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $(SYSROOT_LDFLAGS) \
$(LD_OUT_OPTION)$$@ \
$$($1_EXPECTED_OBJS) $$($1_RES) \
$$($1_LDFLAGS_SUFFIX) $$($1_EXTRA_LDFLAGS_SUFFIX)
$$($1_CREATE_DEBUGINFO_CMDS)
# Touch target to make sure it has a later time stamp than the debug
# symbol files to avoid unnecessary relinking on rebuild.
ifeq ($(OPENJDK_TARGET_OS), windows)
$(TOUCH) $$@
endif
endif
ifneq (,$$($1_STATIC_LIBRARY))
$1_VARDEPS := $(AR) $$($1_ARFLAGS) $$($1_LDFLAGS_SUFFIX) $$($1_EXTRA_LDFLAGS_SUFFIX)
$1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, \
$$($1_OBJECT_DIR)/$$($1_NOSUFFIX).vardeps)
# Generating a static library, ie object file archive.
$$($1_TARGET): $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_VARDEPS_FILE)
$(ECHO) $(LOG_INFO) "Archiving $$($1_STATIC_LIBRARY)"
$(AR) $$($1_ARFLAGS) $(AR_OUT_OPTION)$$($1_TARGET) $$($1_EXPECTED_OBJS) \
$$($1_RES) $$($1_LDFLAGS_SUFFIX) $$($1_EXTRA_LDFLAGS_SUFFIX)
endif
ifneq (,$$($1_PROGRAM))
# A executable binary has been specified, setup the target for it.
$1_EXTRA_LDFLAGS_SUFFIX += $(GLOBAL_LDFLAGS_SUFFIX)
$1_VARDEPS := $$($1_LDEXE) $(SYSROOT_LDFLAGS) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) \
$$($1_LDFLAGS_SUFFIX) $$($1_EXTRA_LDFLAGS_SUFFIX)
$1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, \
$$($1_OBJECT_DIR)/$$($1_NOSUFFIX).vardeps)
$$($1_TARGET): $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_GEN_MANIFEST) \
$$($1_DEBUGINFO_EXTRA_DEPS) $$($1_VARDEPS_FILE)
$(ECHO) $(LOG_INFO) "Linking executable $$($1_BASENAME)"
$$($1_LDEXE) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $(SYSROOT_LDFLAGS) \
$(EXE_OUT_OPTION)$$($1_TARGET) \
$$($1_EXPECTED_OBJS) $$($1_RES) \
$$($1_LDFLAGS_SUFFIX) $$($1_EXTRA_LDFLAGS_SUFFIX)
ifneq (,$$($1_GEN_MANIFEST))
$(MT) -nologo -manifest $$($1_GEN_MANIFEST) -outputresource:$$@;#1
endif
# This only works if the openjdk_codesign identity is present on the system. Let
# silently fail otherwise.
ifneq (,$(CODESIGN))
ifneq (,$$($1_CODESIGN))
$(CODESIGN) -s openjdk_codesign $$@
endif
endif
$$($1_CREATE_DEBUGINFO_CMDS)
# Touch target to make sure it has a later time stamp than the debug
# symbol files to avoid unnecessary relinking on rebuild.
ifeq ($(OPENJDK_TARGET_OS), windows)
$(TOUCH) $$@
endif
endif
endef
endif # _NATIVE_COMPILATION_GMK