7022037: Pause when exiting if debugger is attached on windows
Reviewed-by: dsamersoff, kamg, hosterda
/*
* Copyright (c) 2003, 2010, Oracle and/or its affiliates. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*
*/
#ifndef SHARE_VM_RUNTIME_ORDERACCESS_HPP
#define SHARE_VM_RUNTIME_ORDERACCESS_HPP
#include "memory/allocation.hpp"
// Memory Access Ordering Model
//
// This interface is based on the JSR-133 Cookbook for Compiler Writers
// and on the IA64 memory model. It is the dynamic equivalent of the
// C/C++ volatile specifier. I.e., volatility restricts compile-time
// memory access reordering in a way similar to what we want to occur
// at runtime.
//
// In the following, the terms 'previous', 'subsequent', 'before',
// 'after', 'preceding' and 'succeeding' refer to program order. The
// terms 'down' and 'below' refer to forward load or store motion
// relative to program order, while 'up' and 'above' refer to backward
// motion.
//
//
// We define four primitive memory barrier operations.
//
// LoadLoad: Load1(s); LoadLoad; Load2
//
// Ensures that Load1 completes (obtains the value it loads from memory)
// before Load2 and any subsequent load operations. Loads before Load1
// may *not* float below Load2 and any subsequent load operations.
//
// StoreStore: Store1(s); StoreStore; Store2
//
// Ensures that Store1 completes (the effect on memory of Store1 is made
// visible to other processors) before Store2 and any subsequent store
// operations. Stores before Store1 may *not* float below Store2 and any
// subsequent store operations.
//
// LoadStore: Load1(s); LoadStore; Store2
//
// Ensures that Load1 completes before Store2 and any subsequent store
// operations. Loads before Load1 may *not* float below Store2 and any
// subseqeuent store operations.
//
// StoreLoad: Store1(s); StoreLoad; Load2
//
// Ensures that Store1 completes before Load2 and any subsequent load
// operations. Stores before Store1 may *not* float below Load2 and any
// subseqeuent load operations.
//
//
// We define two further operations, 'release' and 'acquire'. They are
// mirror images of each other.
//
// Execution by a processor of release makes the effect of all memory
// accesses issued by it previous to the release visible to all
// processors *before* the release completes. The effect of subsequent
// memory accesses issued by it *may* be made visible *before* the
// release. I.e., subsequent memory accesses may float above the
// release, but prior ones may not float below it.
//
// Execution by a processor of acquire makes the effect of all memory
// accesses issued by it subsequent to the acquire visible to all
// processors *after* the acquire completes. The effect of prior memory
// accesses issued by it *may* be made visible *after* the acquire.
// I.e., prior memory accesses may float below the acquire, but
// subsequent ones may not float above it.
//
// Finally, we define a 'fence' operation, which conceptually is a
// release combined with an acquire. In the real world these operations
// require one or more machine instructions which can float above and
// below the release or acquire, so we usually can't just issue the
// release-acquire back-to-back. All machines we know of implement some
// sort of memory fence instruction.
//
//
// The standalone implementations of release and acquire need an associated
// dummy volatile store or load respectively. To avoid redundant operations,
// we can define the composite operators: 'release_store', 'store_fence' and
// 'load_acquire'. Here's a summary of the machine instructions corresponding
// to each operation.
//
// sparc RMO ia64 x86
// ---------------------------------------------------------------------
// fence membar #LoadStore | mf lock addl 0,(sp)
// #StoreStore |
// #LoadLoad |
// #StoreLoad
//
// release membar #LoadStore | st.rel [sp]=r0 movl $0,<dummy>
// #StoreStore
// st %g0,[]
//
// acquire ld [%sp],%g0 ld.acq <r>=[sp] movl (sp),<r>
// membar #LoadLoad |
// #LoadStore
//
// release_store membar #LoadStore | st.rel <store>
// #StoreStore
// st
//
// store_fence st st lock xchg
// fence mf
//
// load_acquire ld ld.acq <load>
// membar #LoadLoad |
// #LoadStore
//
// Using only release_store and load_acquire, we can implement the
// following ordered sequences.
//
// 1. load, load == load_acquire, load
// or load_acquire, load_acquire
// 2. load, store == load, release_store
// or load_acquire, store
// or load_acquire, release_store
// 3. store, store == store, release_store
// or release_store, release_store
//
// These require no membar instructions for sparc-TSO and no extra
// instructions for ia64.
//
// Ordering a load relative to preceding stores requires a store_fence,
// which implies a membar #StoreLoad between the store and load under
// sparc-TSO. A fence is required by ia64. On x86, we use locked xchg.
//
// 4. store, load == store_fence, load
//
// Use store_fence to make sure all stores done in an 'interesting'
// region are made visible prior to both subsequent loads and stores.
//
// Conventional usage is to issue a load_acquire for ordered loads. Use
// release_store for ordered stores when you care only that prior stores
// are visible before the release_store, but don't care exactly when the
// store associated with the release_store becomes visible. Use
// release_store_fence to update values like the thread state, where we
// don't want the current thread to continue until all our prior memory
// accesses (including the new thread state) are visible to other threads.
//
//
// C++ Volatility
//
// C++ guarantees ordering at operations termed 'sequence points' (defined
// to be volatile accesses and calls to library I/O functions). 'Side
// effects' (defined as volatile accesses, calls to library I/O functions
// and object modification) previous to a sequence point must be visible
// at that sequence point. See the C++ standard, section 1.9, titled
// "Program Execution". This means that all barrier implementations,
// including standalone loadload, storestore, loadstore, storeload, acquire
// and release must include a sequence point, usually via a volatile memory
// access. Other ways to guarantee a sequence point are, e.g., use of
// indirect calls and linux's __asm__ volatile.
// Note: as of 6973570, we have replaced the originally static "dummy" field
// (see above) by a volatile store to the stack. All of the versions of the
// compilers that we currently use (SunStudio, gcc and VC++) respect the
// semantics of volatile here. If you build HotSpot using other
// compilers, you may need to verify that no compiler reordering occurs
// across the sequence point respresented by the volatile access.
//
//
// os::is_MP Considered Redundant
//
// Callers of this interface do not need to test os::is_MP() before
// issuing an operation. The test is taken care of by the implementation
// of the interface (depending on the vm version and platform, the test
// may or may not be actually done by the implementation).
//
//
// A Note on Memory Ordering and Cache Coherency
//
// Cache coherency and memory ordering are orthogonal concepts, though they
// interact. E.g., all existing itanium machines are cache-coherent, but
// the hardware can freely reorder loads wrt other loads unless it sees a
// load-acquire instruction. All existing sparc machines are cache-coherent
// and, unlike itanium, TSO guarantees that the hardware orders loads wrt
// loads and stores, and stores wrt to each other.
//
// Consider the implementation of loadload. *If* your platform *isn't*
// cache-coherent, then loadload must not only prevent hardware load
// instruction reordering, but it must *also* ensure that subsequent
// loads from addresses that could be written by other processors (i.e.,
// that are broadcast by other processors) go all the way to the first
// level of memory shared by those processors and the one issuing
// the loadload.
//
// So if we have a MP that has, say, a per-processor D$ that doesn't see
// writes by other processors, and has a shared E$ that does, the loadload
// barrier would have to make sure that either
//
// 1. cache lines in the issuing processor's D$ that contained data from
// addresses that could be written by other processors are invalidated, so
// subsequent loads from those addresses go to the E$, (it could do this
// by tagging such cache lines as 'shared', though how to tell the hardware
// to do the tagging is an interesting problem), or
//
// 2. there never are such cache lines in the issuing processor's D$, which
// means all references to shared data (however identified: see above)
// bypass the D$ (i.e., are satisfied from the E$).
//
// If your machine doesn't have an E$, substitute 'main memory' for 'E$'.
//
// Either of these alternatives is a pain, so no current machine we know of
// has incoherent caches.
//
// If loadload didn't have these properties, the store-release sequence for
// publishing a shared data structure wouldn't work, because a processor
// trying to read data newly published by another processor might go to
// its own incoherent caches to satisfy the read instead of to the newly
// written shared memory.
//
//
// NOTE WELL!!
//
// A Note on MutexLocker and Friends
//
// See mutexLocker.hpp. We assume throughout the VM that MutexLocker's
// and friends' constructors do a fence, a lock and an acquire *in that
// order*. And that their destructors do a release and unlock, in *that*
// order. If their implementations change such that these assumptions
// are violated, a whole lot of code will break.
class OrderAccess : AllStatic {
public:
static void loadload();
static void storestore();
static void loadstore();
static void storeload();
static void acquire();
static void release();
static void fence();
static jbyte load_acquire(volatile jbyte* p);
static jshort load_acquire(volatile jshort* p);
static jint load_acquire(volatile jint* p);
static jlong load_acquire(volatile jlong* p);
static jubyte load_acquire(volatile jubyte* p);
static jushort load_acquire(volatile jushort* p);
static juint load_acquire(volatile juint* p);
static julong load_acquire(volatile julong* p);
static jfloat load_acquire(volatile jfloat* p);
static jdouble load_acquire(volatile jdouble* p);
static intptr_t load_ptr_acquire(volatile intptr_t* p);
static void* load_ptr_acquire(volatile void* p);
static void* load_ptr_acquire(const volatile void* p);
static void release_store(volatile jbyte* p, jbyte v);
static void release_store(volatile jshort* p, jshort v);
static void release_store(volatile jint* p, jint v);
static void release_store(volatile jlong* p, jlong v);
static void release_store(volatile jubyte* p, jubyte v);
static void release_store(volatile jushort* p, jushort v);
static void release_store(volatile juint* p, juint v);
static void release_store(volatile julong* p, julong v);
static void release_store(volatile jfloat* p, jfloat v);
static void release_store(volatile jdouble* p, jdouble v);
static void release_store_ptr(volatile intptr_t* p, intptr_t v);
static void release_store_ptr(volatile void* p, void* v);
static void store_fence(jbyte* p, jbyte v);
static void store_fence(jshort* p, jshort v);
static void store_fence(jint* p, jint v);
static void store_fence(jlong* p, jlong v);
static void store_fence(jubyte* p, jubyte v);
static void store_fence(jushort* p, jushort v);
static void store_fence(juint* p, juint v);
static void store_fence(julong* p, julong v);
static void store_fence(jfloat* p, jfloat v);
static void store_fence(jdouble* p, jdouble v);
static void store_ptr_fence(intptr_t* p, intptr_t v);
static void store_ptr_fence(void** p, void* v);
static void release_store_fence(volatile jbyte* p, jbyte v);
static void release_store_fence(volatile jshort* p, jshort v);
static void release_store_fence(volatile jint* p, jint v);
static void release_store_fence(volatile jlong* p, jlong v);
static void release_store_fence(volatile jubyte* p, jubyte v);
static void release_store_fence(volatile jushort* p, jushort v);
static void release_store_fence(volatile juint* p, juint v);
static void release_store_fence(volatile julong* p, julong v);
static void release_store_fence(volatile jfloat* p, jfloat v);
static void release_store_fence(volatile jdouble* p, jdouble v);
static void release_store_ptr_fence(volatile intptr_t* p, intptr_t v);
static void release_store_ptr_fence(volatile void* p, void* v);
private:
// This is a helper that invokes the StubRoutines::fence_entry()
// routine if it exists, It should only be used by platforms that
// don't another way to do the inline eassembly.
static void StubRoutines_fence();
};
#endif // SHARE_VM_RUNTIME_ORDERACCESS_HPP