#
# Copyright 2005-2008 Sun Microsystems, Inc.  All Rights Reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation.  Sun designates this
# particular file as subject to the "Classpath" exception as provided
# by Sun in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
# CA 95054 USA or visit www.sun.com if you need additional information or
# have any questions.
#

#
# Definitions for all platforms.
#
# Normally the convention is that these alternate definitions of
#   primary make variables are never defined inside the Makefiles anywhere
#   but are defined via environment variables or set on the make command
#   line. So you should never see an ALT_* variable defined in any
#   makefiles, just used. This is the convention and there are some
#   exceptions, either mistakes or unusual circumstances.
#
# The naming convention for the default value of one of these variables
#   that has an ALT_* override capability is to name the default value with a
#   leading underscore (_). So for XXX you would have:
#      _XXX      default value
#      ALT_XXX   any override the user is providing if any
#      XXX       the final value, either the default _XXX or the ALT_XXX value.
#

# On Directory names. In very rare cases should the Windows directory
#    names use the backslash, please use the C:/ style of windows paths.
#    Avoid duplicating the // characters in paths, this has known to cause
#    strange problems with jar and other utilities, e.g. /a//b/ != /a/b/.
#    Some of these variables have an explicit trailing / character, but in
#    general, they should NOT have the trailing / character.

# Get shared system utilities macros defined
include $(JDK_MAKE_SHARED_DIR)/Defs-utils.gmk

# Assumes ARCH, PLATFORM, ARCH_VM_SUBDIR, JDK_TOPDIR, etc. have been defined.

# Simple pwd path
define PwdPath
$(shell $(CD) $1 2> $(DEV_NULL) && $(PWD))
endef
define AbsPwdPathCheck
$(shell $(CD) .. 2> $(DEV_NULL) && $(CD) $1 2> $(DEV_NULL) && $(PWD))
endef

# Checks an ALT value for spaces (should be one word), 
#       warns and returns Check_ALT_$1 if spaces
define AltCheckSpaces
$(if $(word 2,$($1)),$(warning "WARNING: Value of $1 contains a space: '$($1)', check or set ALT_$1")Check_ALT_$1,$($1))
endef

# Checks an ALT value for empty, warns and returns Check_ALT_$1 if empty
define AltCheckValue
$(if $($1),$($1),$(warning "WARNING: Value of $1 cannot be empty, check or set ALT_$1")Check_ALT_$1)
endef

# Checks any value for empty, warns and returns $2 if empty
define CheckValue
$(if $($1),$($1),$(warning "WARNING: Value of $1 cannot be empty, will use '$2'")$2)
endef

# Prefix for a utility prefix path, if empty leave alone, otherwise end with a /
define PrefixPath
$(if $1,$(subst //,/,$1/),)
endef

# Select a directory if it exists, or the alternate 2 or the alternate 3
define DirExists
$(shell \
  if [ -d "$1" ]; then  \
    echo "$1"; \
  elif [ -d "$2" ]; then \
    echo "$2"; \
  else \
    echo "$3"; \
  fi)
endef

# Select a writable directory if it exists and is writable, or the alternate
define WriteDirExists
$(shell \
  if [ -d "$1" -a -w "$1" ]; then  \
    echo "$1"; \
  else \
    echo "$2"; \
  fi)
endef

# Select a file if it exists, or the alternate 1, or the alternate 2
define FileExists
$(shell \
  if [ -r "$1" ]; then \
    echo "$1"; \
  elif [ -r "$2" ]; then \
    echo "$2"; \
  else \
    echo "NO_FILE_EXISTS"; \
  fi)
endef

# Given a line of text, get the major.minor version number from it
define GetVersion
$(shell echo $1 | sed -e 's@[^1-9]*\([1-9][0-9]*\.[0-9][0-9]*\).*@\1@' )
endef

# Given a major.minor.micro version, return the major, minor, or micro number
define MajorVersion
$(if $(word 1, $(subst ., ,$1)),$(word 1, $(subst ., ,$1)),0)
endef
define MinorVersion
$(if $(word 2, $(subst ., ,$1)),$(word 2, $(subst ., ,$1)),0)
endef
define MicroVersion
$(if $(word 3, $(subst ., ,$1)),$(word 3, $(subst ., ,$1)),0)
endef

# Macro that returns missing, same, newer, or older $1=version $2=required
#  (currently does not check the micro number)
define CheckVersions
$(shell \
  if [ "$1" = "" -o "$2" = "" ]; then \
    echo missing; \
  else \
    if [ "$1" = "$2" ]; then \
      echo same; \
    else \
      if [ $(call MajorVersion,$1) -lt $(call MajorVersion,$2) ] ; then \
        echo older; \
      else \
	if [ $(call MajorVersion,$1) -eq $(call MajorVersion,$2) -a \
	     $(call MinorVersion,$1) -lt $(call MinorVersion,$2) ]; then \
          echo older; \
        else \
          echo newer; \
        fi; \
      fi; \
    fi; \
  fi)
endef

# Make sure certain variables are non-empty at this point
_check_values:=\
$(call CheckValue,ARCH,),\
$(call CheckValue,ARCH_DATA_MODEL,),\
$(call CheckValue,ARCH_VM_SUBDIR,),\
$(call CheckValue,JDK_TOPDIR,),\
$(call CheckValue,JDK_MAKE_SHARED_DIR,),\
$(call CheckValue,VARIANT,),\
$(call CheckValue,PLATFORM,)

# Misc common settings for all workspaces
#   This determines the version of the product, and the previous version or boot
ifndef JDK_MAJOR_VERSION
  JDK_MAJOR_VERSION      = 1
  PREVIOUS_MAJOR_VERSION = 1
endif

ifndef JDK_MINOR_VERSION
  JDK_MINOR_VERSION      = 7
  PREVIOUS_MINOR_VERSION = 6
endif

ifndef JDK_MICRO_VERSION
  JDK_MICRO_VERSION      = 0
  PREVIOUS_MICRO_VERSION = 0
endif

ifndef MILESTONE
  MILESTONE = internal
endif

# Default names
LAUNCHER_NAME = java
PRODUCT_NAME = Java(TM)
PRODUCT_SUFFIX = SE Runtime Environment
COMPANY_NAME = Sun Microsystems, Inc.

ifdef OPENJDK
  LAUNCHER_NAME = openjdk
  PRODUCT_NAME = OpenJDK
  PRODUCT_SUFFIX = Runtime Environment
  COMPANY_NAME =
endif

RUNTIME_NAME = $(PRODUCT_NAME) $(PRODUCT_SUFFIX)

ifndef BUILD_NUMBER
  JDK_BUILD_NUMBER = b00
else
  ifndef JDK_BUILD_NUMBER
    JDK_BUILD_NUMBER = $(BUILD_NUMBER)
  endif
endif

# Default variant is the optimized version of everything
#    can be OPT or DBG,  default is OPT
#    Determine the extra pattern to add to the release name for debug/fastdebug.
#    Determine the JDK_IMPORT_VARIANT, so we get the right VM files copied over.
#    Determine suffix for obj directory or OBJDIR, for .o files.
#    (by keeping .o files separate, just .o files, they don't clobber each
#     other, however, the library files will clobber each other).
#
ifeq ($(VARIANT), DBG)
  BUILD_VARIANT_RELEASE=-debug
  OBJDIRNAME_SUFFIX=_g
else
  BUILD_VARIANT_RELEASE=
  OBJDIRNAME_SUFFIX=
endif
ifeq ($(FASTDEBUG), true)
  VARIANT=DBG
  BUILD_VARIANT_RELEASE=-fastdebug
  OBJDIRNAME_SUFFIX=_gO
  _JDK_IMPORT_VARIANT=/fastdebug
endif

# Depending on the flavor of the build, add a -debug or -fastdebug to the name
ifdef DEBUG_NAME
  BUILD_VARIANT_RELEASE=-$(DEBUG_NAME)
endif

# These default values are redefined during a release build.
#    CTE can set JDK_UPDATE_VERSION during the update release
ifdef JDK_UPDATE_VERSION
  JDK_VERSION  = $(JDK_MAJOR_VERSION).$(JDK_MINOR_VERSION).$(JDK_MICRO_VERSION)_$(JDK_UPDATE_VERSION)
  MARKETING_NUMBER := $(shell \
	$(ECHO) $(JDK_UPDATE_VERSION) | $(NAWK) '{if (substr($$0,1,1)=="0") print substr($$0, 2); else print $$0;}')
  MARKET_NAME= $(shell $(ECHO) " Update $(MARKETING_NUMBER)")
  JDK_MKTG_VERSION  = $(JDK_MINOR_VERSION)u$(MARKETING_NUMBER)
else
  JDK_VERSION  = $(JDK_MAJOR_VERSION).$(JDK_MINOR_VERSION).$(JDK_MICRO_VERSION)
  JDK_MKTG_VERSION  = $(JDK_MINOR_VERSION)
  MARKET_NAME=
endif
JDK_UNDERSCORE_VERSION =  $(subst .,_,$(JDK_VERSION))
JDK_MKTG_UNDERSCORE_VERSION =  $(subst .,_,$(JDK_MKTG_VERSION))

# RELEASE is JDK_VERSION and -MILESTONE if MILESTONE is set
ifneq ($(MILESTONE),fcs)
  RELEASE      = $(JDK_VERSION)-$(MILESTONE)$(BUILD_VARIANT_RELEASE)
else
  RELEASE      = $(JDK_VERSION)$(BUILD_VARIANT_RELEASE)
endif

# FULL_VERSION is RELEASE and -BUILD_NUMBER if BUILD_NUMBER is set
ifdef BUILD_NUMBER
  FULL_VERSION = $(RELEASE)-$(BUILD_NUMBER)
else
  BUILD_NUMBER = b00
  BUILD_DATE := $(shell $(DATE) '+%Y_%m_%d_%H_%M')
  CLEAN_USERNAME := $(shell $(ECHO) "$(USER)" | $(TR) -d -c '[:alnum:]')
  USER_RELEASE_SUFFIX := $(shell $(ECHO) "$(CLEAN_USERNAME)_$(BUILD_DATE)" | $(TR) '[:upper:]' '[:lower:]' )
  FULL_VERSION = $(RELEASE)-$(USER_RELEASE_SUFFIX)-$(BUILD_NUMBER)
endif

# Promoted build location
PROMOTED_RE_AREA = $(SLASH_JAVA)/re/jdk/$(JDK_VERSION)/promoted
PROMOTED_BUILD_LATEST = latest
PROMOTED_BUILD_BASEDIR = $(PROMOTED_RE_AREA)/$(PROMOTED_BUILD_LATEST)
PROMOTED_BUILD_BINARIES = $(PROMOTED_BUILD_BASEDIR)/binaries

# PARALLEL_COMPILE_JOBS: is the number of compiles done in parallel.
#  If the user sets ALT_PARALLEL_COMPILE_JOBS, then COMPILE_APPROACH is set
#  to parallel.
#
#  Recommended setting: 2 seems to be ideal for single cpu machines,
#                       2 times the number of CPU's is a basic formula, 
#                       but probably not more than 4 if the machine is 
#                       being shared by others, or the machine is limited 
#                       in RAM or swap.
#
ifdef ALT_PARALLEL_COMPILE_JOBS
  PARALLEL_COMPILE_JOBS=$(ALT_PARALLEL_COMPILE_JOBS)
else
  PARALLEL_COMPILE_JOBS=2
endif

# Previous JDK release (version of BOOTDIR version)
ifdef ALT_PREVIOUS_JDK_VERSION
  PREVIOUS_JDK_VERSION = $(ALT_PREVIOUS_JDK_VERSION)
else
  PREVIOUS_JDK_VERSION  = $(PREVIOUS_MAJOR_VERSION).$(PREVIOUS_MINOR_VERSION).$(PREVIOUS_MICRO_VERSION)
endif
export PREVIOUS_JDK_VERSION
PREVIOUS_JDK_VERSION:=$(call AltCheckSpaces,PREVIOUS_JDK_VERSION)
PREVIOUS_JDK_VERSION:=$(call AltCheckValue,PREVIOUS_JDK_VERSION)

# Version with _ instead of . in number
ifeq ($(PREVIOUS_MINOR_VERSION),5)
  PREVIOUS_JDK_UNDERSCORE_VERSION =  $(subst .,_,$(PREVIOUS_JDK_VERSION))
else
  PREVIOUS_JDK_UNDERSCORE_VERSION = $(PREVIOUS_MINOR_VERSION)
endif

# Include any private definitions for this set of workspaces
_PRIVATE_DEFS_FILE=$(JDK_MAKE_SHARED_DIR)/PrivateDefs.gmk
USING_PRIVATE_DEFS:=$(shell if [ -f $(_PRIVATE_DEFS_FILE) ]; then echo true; else echo false; fi)
ifeq ($(USING_PRIVATE_DEFS),true)
dummy:=$(warning "WARNING: Using definitions from $(_PRIVATE_DEFS_FILE)")
include $(_PRIVATE_DEFS_FILE)
endif

# Get platform specific settings
include $(JDK_MAKE_SHARED_DIR)/Defs-$(PLATFORM).gmk

# Components
ifdef ALT_LANGTOOLS_DIST
  LANGTOOLS_DIST :=$(call FullPath,$(ALT_LANGTOOLS_DIST))
else
  LANGTOOLS_DIST =
endif
ifdef ALT_CORBA_DIST
  CORBA_DIST :=$(call FullPath,$(ALT_CORBA_DIST))
else
  CORBA_DIST =
endif
ifdef ALT_JAXP_DIST
  JAXP_DIST :=$(call FullPath,$(ALT_JAXP_DIST))
else
  JAXP_DIST =
endif
ifdef ALT_JAXWS_DIST
  JAXWS_DIST :=$(call FullPath,$(ALT_JAXWS_DIST))
else
  JAXWS_DIST =
endif

# HOTSPOT_DOCS_IMPORT_PATH: Path to hotspot docs files to import into the docs generation
ifdef ALT_HOTSPOT_DOCS_IMPORT_PATH
  HOTSPOT_DOCS_IMPORT_PATH :=$(call FullPath,$(ALT_HOTSPOT_DOCS_IMPORT_PATH))
else
  HOTSPOT_DOCS_IMPORT_PATH :=$(call DirExists,$(HOTSPOT_IMPORT_PATH)/docs,$(PROMOTED_BUILD_BASEDIR)/docs,/NO_DOCS_DIR)
endif

# PREVIOUS_JDK_FILE: filename of install bundle for previous JDK
ifdef ALT_PREVIOUS_JDK_FILE
  PREVIOUS_JDK_FILE  =$(ALT_PREVIOUS_JDK_FILE)
else
  PREVIOUS_JDK_FILE = jdk-$(PREVIOUS_JDK_UNDERSCORE_VERSION)-$(PLATFORM)-$(ARCH)$(BUNDLE_FILE_SUFFIX)
endif
export PREVIOUS_JDK_FILE
PREVIOUS_JDK_FILE:=$(call AltCheckSpaces,PREVIOUS_JDK_FILE)
PREVIOUS_JDK_FILE:=$(call AltCheckValue,PREVIOUS_JDK_FILE)

# PREVIOUS_JRE_FILE: filename of install bundle for previous JRE
ifdef ALT_PREVIOUS_JRE_FILE
  PREVIOUS_JRE_FILE  =$(ALT_PREVIOUS_JRE_FILE)
else
  PREVIOUS_JRE_FILE = jre-$(PREVIOUS_JDK_UNDERSCORE_VERSION)-$(PLATFORM)-$(ARCH)$(BUNDLE_FILE_SUFFIX)
endif
export PREVIOUS_JRE_FILE
PREVIOUS_JRE_FILE:=$(call AltCheckSpaces,PREVIOUS_JRE_FILE)
PREVIOUS_JRE_FILE:=$(call AltCheckValue,PREVIOUS_JRE_FILE)

# Set here as shared variables
PREVIOUS_JRE_BUNDLE = $(PREVIOUS_RELEASE_PATH)/$(PREVIOUS_JRE_FILE)
PREVIOUS_JDK_BUNDLE = $(PREVIOUS_RELEASE_PATH)/$(PREVIOUS_JDK_FILE)

# These are the same on all platforms but require the above platform include 1st

# BOOTDIR: Bootstrap JDK, previous released JDK.
#   _BOOTDIR1 and _BOOTDIR2 picked by platform
ifdef ALT_BOOTDIR
  BOOTDIR =$(ALT_BOOTDIR)
else
  BOOTDIR  :=$(call DirExists,$(_BOOTDIR1),$(_BOOTDIR2),/NO_BOOTDIR)
endif
export BOOTDIR
BOOTDIR:=$(call AltCheckSpaces,BOOTDIR)
BOOTDIR:=$(call AltCheckValue,BOOTDIR)

# PREVIOUS_RELEASE_PATH: path to where previous release bundles are
ifdef ALT_PREVIOUS_RELEASE_PATH
  PREVIOUS_RELEASE_PATH :=$(call OptFullPath,$(ALT_PREVIOUS_RELEASE_PATH))
else
  PREVIOUS_RELEASE_PATH =$(SLASH_JAVA)/re/jdk/$(PREVIOUS_JDK_VERSION)/archive/fcs/bundles/$(PLATFORM)-$(ARCH)
endif
export PREVIOUS_RELEASE_PATH
PREVIOUS_RELEASE_PATH:=$(call AltCheckSpaces,PREVIOUS_RELEASE_PATH)
PREVIOUS_RELEASE_PATH:=$(call AltCheckValue,PREVIOUS_RELEASE_PATH)

# PREVIOUS_RELEASE_IMAGE: Previous install image to compare against
ifdef ALT_PREVIOUS_RELEASE_IMAGE
  PREVIOUS_RELEASE_IMAGE :=$(call FullPath,$(ALT_PREVIOUS_RELEASE_IMAGE))
endif

# CACERTS_FILE: if OPENJDK is false and the internal version of the file 
#		(that is, non-empty) is available, use it, otherwise use an 
#		empty keystore.
#
# We put this variable here for sanity checks and in case another
# components will need to know which cacerts file is being used.
#
ifdef ALT_CACERTS_FILE
  CACERTS_FILE = $(ALT_CACERTS_FILE)
else
  CACERTS_EXT   = $(SHARE_SRC)/lib/security/cacerts
  ifdef OPENJDK
    CACERTS_FILE  :=$(CACERTS_EXT)
  else # (!OPENJDK)
    CACERTS_INT   = $(CLOSED_SHARE_SRC)/lib/security/cacerts.internal
    CACERTS_FILE  :=$(call FileExists,$(CACERTS_INT),$(CACERTS_EXT))
  endif # (OPENJDK)
endif
CACERTS_FILE:=$(call AltCheckSpaces,CACERTS_FILE)
CACERTS_FILE:=$(call AltCheckValue,CACERTS_FILE)

# OUTPUTDIR: Location of all output for the build
ifdef ALT_OUTPUTDIR
  OUTPUTDIR:=$(subst \,/,$(ALT_OUTPUTDIR))
  # Assumes this is absolute (checks later)
  ABS_OUTPUTDIR:=$(OUTPUTDIR)
else
  ifndef _OUTPUTDIR
    # Default:  Get "build" parent directory, which should always exist
    ifndef BUILD_PARENT_DIRECTORY
      BUILD_PARENT_DIRECTORY=$(BUILDDIR)/..
    endif
    ABS_BUILD_PARENT_DIRECTORY:=$(call FullPath,$(BUILD_PARENT_DIRECTORY))
    ifdef OPENJDK
      _OUTPUTDIRNAME=$(PLATFORM)-$(ARCH)$(OPENJDK_SUFFIX)
    else
      _OUTPUTDIRNAME=$(PLATFORM)-$(ARCH)
    endif
    _OUTPUTDIR=$(BUILD_PARENT_DIRECTORY)/build/$(_OUTPUTDIRNAME)
    ABS_OUTPUTDIR:=$(ABS_BUILD_PARENT_DIRECTORY)/build/$(_OUTPUTDIRNAME)
  endif
  OUTPUTDIR:=$(_OUTPUTDIR)
endif
# Check for spaces and null value
OUTPUTDIR:=$(call AltCheckSpaces,OUTPUTDIR)
OUTPUTDIR:=$(call AltCheckValue,OUTPUTDIR)

#
# When signing the JCE framework and provider, we could be using built
# bits on a read-only filesystem.  If so, this test will fail and crash
# the build.
#
ifndef IGNORE_WRITABLE_OUTPUTDIR_TEST
# Create the output directory and make sure it exists and is writable
_create_outputdir:=$(shell $(MKDIR) -p "$(OUTPUTDIR)" > $(DEV_NULL) 2>&1)
ifeq ($(call WriteDirExists,$(OUTPUTDIR),/dev/null),/dev/null)
  _outputdir_error:=$(error "ERROR: OUTPUTDIR '$(OUTPUTDIR)' not created or not writable")
endif
endif

# Define absolute path if needed and check for spaces and null value
ifndef ABS_OUTPUTDIR
  ABS_OUTPUTDIR:=$(call FullPath,$(OUTPUTDIR))
endif
ABS_OUTPUTDIR:=$(call AltCheckSpaces,ABS_OUTPUTDIR)
ABS_OUTPUTDIR:=$(call AltCheckValue,ABS_OUTPUTDIR)
# Make doubly sure this is a full path
ifeq ($(call AbsPwdPathCheck,$(ABS_OUTPUTDIR)), )
  ifdef ALT_OUTPUTDIR
    _outputdir_error:=$(error "ERROR: Trouble with the absolute path for OUTPUTDIR '$(OUTPUTDIR)', was ALT_OUTPUTDIR '$(ALT_OUTPUTDIR)' an absolute path?")
  else
    _outputdir_error:=$(error "ERROR: Trouble with the absolute path for OUTPUTDIR '$(OUTPUTDIR)'")
  endif
endif
_dir1:=$(call FullPath,$(ABS_OUTPUTDIR))
_dir2:=$(call FullPath,$(OUTPUTDIR))
ifneq ($(_dir1),$(_dir2))
  _outputdir_error:=$(error "ERROR: ABS_OUTPUTDIR '$(ABS_OUTPUTDIR)' is not the same directory as OUTPUTDIR '$(OUTPUTDIR)', '$(_dir1)'!='$(_dir2)'")
endif

# Bin directory
#   NOTE: ISA_DIR is usually empty, on Solaris it might be /sparcv9 or /amd64
BINDIR      = $(OUTPUTDIR)/bin$(ISA_DIR)
  
# MOZILLA_HEADERS_PATH: path to mozilla header files for plugin
ifdef ALT_MOZILLA_HEADERS_PATH
  MOZILLA_HEADERS_PATH :=$(call FullPath,$(ALT_MOZILLA_HEADERS_PATH))
else
  MOZILLA_HEADERS_PATH  =$(JDK_DEVTOOLS_DIR)/share/plugin
endif
MOZILLA_HEADERS_PATH:=$(call AltCheckSpaces,MOZILLA_HEADERS_PATH)
MOZILLA_HEADERS_PATH:=$(call AltCheckValue,MOZILLA_HEADERS_PATH)

# CUPS_HEADERS_PATH: path to Cups headers files for Unix printing
ifneq ($(PLATFORM), windows)
JDK_CUPS_HEADERS_PATH=$(JDK_DEVTOOLS_DIR)/share/cups/include
  ifdef ALT_CUPS_HEADERS_PATH
     CUPS_HEADERS_PATH:=$(call FullPath,$(ALT_CUPS_HEADERS_PATH))
     CUP_HEADERS_PATH:=$(call AltCheckValue,CUPS_HEADERS_PATH)
  else 
    CUPS_HEADERS_PATH:= \
      $(shell if [ -d "$(JDK_CUPS_HEADERS_PATH)" ]; then \
        echo "$(JDK_CUPS_HEADERS_PATH)"; \
      else \
         echo "$(_CUPS_HEADERS_PATH)";\
      fi)
  endif
endif

# Utilities ant and findbugs
ifeq ($(ANT_HOME),)
  ANT_HOME := $(call DirExists,/usr/share/ant,$(JDK_DEVTOOLS_DIR)/share/ant/latest,)
endif
ifeq ($(ANT_HOME),)
  ANT = ant
else
  ANT = $(ANT_HOME)/bin/ant
endif
ifeq ($(FINDBUGS_HOME),)
  FINDBUGS_HOME := $(call DirExists,/usr/share/findbugs,$(JDK_DEVTOOLS_DIR)/share/findbugs/latest,)
endif
ifeq ($(FINDBUGS_HOME),)
  FINDBUGS = findbugs
else
  FINDBUGS = $(FINDBUGS_HOME)/bin/findbugs
endif

ifdef ALT_COPYRIGHT_YEAR
  COPYRIGHT_YEAR = $(ALT_COPYRIGHT_YEAR)
else
  COPYRIGHT_YEAR = $(shell $(DATE) '+%Y')
endif

# Get shared compiler settings
include $(JDK_MAKE_SHARED_DIR)/Compiler.gmk