8187444: Forest Consolidation: Make build work
Reviewed-by: darcy, ihse
Contributed-by: erik.joelsson@oracle.com, maurizio.cimadamore@oracle.com, sundararajan.athijegannathan@oracle.com, jonathan.gibbons@oracle.com
#
# Copyright (c) 2014, 2017, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation. Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
default: all
include $(SPEC)
include MakeBase.gmk
THIS_FILE := $(TOPDIR)/test/make/TestMakeBase.gmk
DEPS := $(THIS_FILE) \
$(TOPDIR)/make/common/MakeBase.gmk \
#
# Assert two strings are equal
# 1 - Tested value
# 2 - Exepected value
# 3 - Error message
define assert-equals
ifneq ($$(strip $1),$$(strip $2))
$$(error $3 - Expected >$$(strip $2)< - Got >$$(strip $1)<)
endif
endef
# On macosx, file system timestamps only have 1 second resultion so must add
# sleeps to properly test dependencies.
ifeq ($(OPENJDK_BUILD_OS), macosx)
SLEEP_ON_MAC := sleep 1
endif
OUTPUT_DIR := $(TESTMAKE_OUTPUTDIR)/make-base
$(call MakeDir, $(OUTPUT_DIR))
################################################################################
# Escape $
ifneq ($(call EscapeDollar, foo$$bar), foo\$$bar)
$(error EscapeDollar failed $(call EscapeDollar, foo$$bar) foo\$$bar)
endif
ESCAPE_DOLLAR_DIR := $(OUTPUT_DIR)/escape-dollar
$(ESCAPE_DOLLAR_DIR)/_escape_dollar: $(DEPS)
$(RM) -r $(@D)
$(MKDIR) -p $(@D)
$(ECHO) foo\$$bar > $(@D)/file1
$(ECHO) $(call EscapeDollar, foo$$bar) > $(@D)/file2
$(ECHO) $(call EscapeDollar, foo\$$bar) > $(@D)/file3
$(DIFF) $(@D)/file1 $(@D)/file2
$(DIFF) $(@D)/file1 $(@D)/file3
$(TOUCH) $@
TEST_TARGETS += $(ESCAPE_DOLLAR_DIR)/_escape_dollar
################################################################################
# Test containing and not-containing
CONT_LIST := foo bar baz foobar foobaz
# Param 1 - string to look for
# Param 2 - expected result
define TestContaining
value := $$(call containing, $1, $(CONT_LIST))
ifneq ($$(value), $2)
$$(info (call containing, $1, $(CONT_LIST)))
$$(error result >$$(value)<, expected >$2<)
endif
endef
$(eval $(call TestContaining,bar,bar foobar))
$(eval $(call TestContaining,foo bar,foo bar foobar foobaz))
# Param 1 - string to look for
# Param 2 - expected result
define TestNotContaining
value := $$(call not-containing, $1, $(CONT_LIST))
ifneq ($$(value), $2)
$$(info (call not-containing, $1, $(CONT_LIST)))
$$(error result >$$(value)<, expected >$2<)
endif
endef
$(eval $(call TestNotContaining,bar,foo baz foobaz))
$(eval $(call TestNotContaining,foo bar,baz))
################################################################################
# Test Equals
EQUALS_VALUE1 := value1$(SPACE)
EQUALS_VALUE2 := value2
ifneq ($(call equals, $(EQUALS_VALUE1), $(EQUALS_VALUE2)), )
$(error The strings >$(EQUALS_VALUE1)< and >$(EQUALS_VALUE2)< are equal)
endif
ifeq ($(call equals, $(EQUALS_VALUE1), $(EQUALS_VALUE1)), )
$(error The strings >$(EQUALS_VALUE1)< and >$(EQUALS_VALUE1)< are not equal)
endif
################################################################################
# Test remove-prefixes
$(eval $(call assert-equals, \
$(call remove-prefixes, pre, prefix postfix), fix postfix, \
Prefixes not properly removed))
$(eval $(call assert-equals, \
$(call remove-prefixes, pre post, prefix postfix), fix fix, \
Prefixes not properly removed))
################################################################################
# Test ShellQuote
SHELL_QUOTE_VALUE := foo '""' "''" bar
SHELL_QUOTE_RESULT := $(shell $(ECHO) $(call ShellQuote, \
$(SHELL_QUOTE_VALUE)))
ifneq ($(SHELL_QUOTE_VALUE), $(SHELL_QUOTE_RESULT))
$(error Expected: >$(SHELL_QUOTE_VALUE)< - Result: >$(SHELL_QUOTE_RESULT)<)
endif
################################################################################
# Test read and write to file
READ_WRITE_FILE := $(OUTPUT_DIR)/read-write
READ_WRITE_VALUE := foo '""' "''" \t\n\\ bar
$(call WriteFile, $(READ_WRITE_VALUE), $(READ_WRITE_FILE))
READ_WRITE_RESULT := $(call ReadFile, $(READ_WRITE_FILE))
ifneq ($(READ_WRITE_VALUE), $(READ_WRITE_RESULT))
$(error Expected: >$(READ_WRITE_VALUE)< - Result: >$(READ_WRITE_RESULT)<)
endif
################################################################################
# Test creating dependencies on make variables
VARDEP_DIR := $(OUTPUT_DIR)/vardep
VARDEP_SRC_FILE := $(VARDEP_DIR)/src-file
VARDEP_TARGET_FILE := $(VARDEP_DIR)/target-file
VARDEP_FLAG_FILE := $(VARDEP_DIR)/flag-file
$(VARDEP_DIR)/src-file:
$(MKDIR) -p $(@D)
$(ECHO) "some string XXX" > $@
$(VARDEP_TARGET_FILE): $(VARDEP_DIR)/src-file \
$(call DependOnVariable, VARDEP_TEST_VAR)
$(MKDIR) -p $(@D)
$(SED) -e 's/XXX/$(VARDEP_TEST_VAR)/g' $< > $@
$(TOUCH) $(VARDEP_FLAG_FILE)
test-vardep:
$(RM) $(VARDEP_SRC_FILE) $(VARDEP_TARGET_FILE) $(VARDEP_FLAG_FILE)
#
# Simply create the target file and verify that it has the correct value
#
$(MAKE) -f $(THIS_FILE) VARDEP_TEST_VAR=value1 $(VARDEP_TARGET_FILE)
$(PRINTF) "Expecting value1: %s\n" "`$(CAT) $(VARDEP_DIR)/target-file`"
test "some string value1" = "`$(CAT) $(VARDEP_DIR)/target-file`"
test -e $(VARDEP_FLAG_FILE)
#
# Make the target file again and verify that the value is updated with
# the new value
#
$(SLEEP_ON_MAC)
$(MAKE) -f $(THIS_FILE) VARDEP_TEST_VAR=value2 $(VARDEP_TARGET_FILE)
$(PRINTF) "Expecting value2: %s\n" "`$(CAT) $(VARDEP_DIR)/target-file`"
test "some string value2" = "`$(CAT) $(VARDEP_DIR)/target-file`"
test -e $(VARDEP_FLAG_FILE)
#
# Make the target again with the same value and verify that the recipe
# was never run by checking that the flag file was not recreated
#
$(SLEEP_ON_MAC)
$(RM) $(VARDEP_FLAG_FILE)
$(MAKE) -f $(THIS_FILE) VARDEP_TEST_VAR=value2 $(VARDEP_TARGET_FILE)
$(PRINTF) "Expecting value2: %s\n" "`$(CAT) $(VARDEP_DIR)/target-file`"
test "some string value2" = "`$(CAT) $(VARDEP_DIR)/target-file`"
test ! -e $(VARDEP_FLAG_FILE)
#
# Test running with spaces at the end and the middle of the value
# and verify that the file isn't rewritten the second time
#
$(MAKE) -f $(THIS_FILE) VARDEP_TEST_VAR="value3 foo " $(VARDEP_TARGET_FILE)
$(RM) $(VARDEP_FLAG_FILE)
$(MAKE) -f $(THIS_FILE) VARDEP_TEST_VAR="value3 foo" $(VARDEP_TARGET_FILE)
test ! -e $(VARDEP_FLAG_FILE)
$(MAKE) -f $(THIS_FILE) VARDEP_TEST_VAR=" value3 foo" $(VARDEP_TARGET_FILE)
test ! -e $(VARDEP_FLAG_FILE)
#
# Test including some problematic characters
$(MAKE) -f $(THIS_FILE) VARDEP_TEST_VAR='value4 \$$ORIGIN' $(VARDEP_TARGET_FILE)
$(RM) $(VARDEP_FLAG_FILE)
$(MAKE) -f $(THIS_FILE) VARDEP_TEST_VAR='value4 \$$ORIGIN' $(VARDEP_TARGET_FILE)
test ! -e $(VARDEP_FLAG_FILE)
# Test specifying a specific value file to store variable in
VARDEP_VALUE_FILE := $(VARDEP_DIR)/value-file
VARDEP_TEST_VAR2 := value3
VARDEP_RETURN_VALUE := $(call DependOnVariable, VARDEP_TEST_VAR2, $(VARDEP_VALUE_FILE))
$(eval $(call assert-equals, $(VARDEP_RETURN_VALUE), $(VARDEP_VALUE_FILE), \
Wrong filename returned))
-include $(VARDEP_VALUE_FILE)
$(eval $(call assert-equals, $(VARDEP_TEST_VAR2_old), $(VARDEP_TEST_VAR2), \
Wrong contents in vardeps file))
# Test with a variable value containing some problematic characters
VARDEP_TEST_VAR3 := foo '""' "''" bar \$$ORIGIN &\#x00a9
VARDEP_VALUE_FILE := $(call DependOnVariable, VARDEP_TEST_VAR3)
-include $(VARDEP_VALUE_FILE)
$(eval $(call assert-equals, $(call EscapeHash,$(VARDEP_TEST_VAR3_old)), \
$(call EscapeHash,$(VARDEP_TEST_VAR3)), \
Wrong contents in vardep file))
TEST_TARGETS += test-vardep
################################################################################
# Test sequence
ifneq ($(call sequence, 1, 1), 1)
$(error Sequence 1, 1 should be "1", but was $(call sequence, 1, 1))
endif
ifneq ($(call sequence, 2, 3), 2 3)
$(error Sequence 2, 3 should be "2 3", but was $(call sequence, 2, 3))
endif
ifneq ($(call sequence, 4, 9), 4 5 6 7 8 9)
$(error Sequence 4, 9 should be "4 5 6 7 8 9", but was $(call sequence, 4, 9))
endif
ifneq ($(call sequence, 5, 15), 5 6 7 8 9 10 11 12 13 14 15)
$(error Sequence 5, 15 should be "5 6 7 8 9 10 11 12 13 14 15", \
but was $(call sequence, 5, 15))
endif
################################################################################
# Test that PathList is safe when called multiple nested times.
PATHLIST_INPUT := foo bar baz
$(eval $(call assert-equals, \
$(call PathList, $(call PathList, $(PATHLIST_INPUT))), \
$(call PathList, $(PATHLIST_INPUT)), \
PathList call not safe for calling twice))
################################################################################
# Test FindCommonPathPrefix
$(eval $(call assert-equals, \
$(call FindCommonPathPrefix, /foo/bar/baz, /foo/bar/banan), \
/foo/bar, \
FindCommonPathPrefix, \
))
$(eval $(call assert-equals, \
$(call FindCommonPathPrefix, /foo/bar/baz, /foo/bar), \
/foo/bar, \
FindCommonPathPrefix, \
))
$(eval $(call assert-equals, \
$(call FindCommonPathPrefix, /foo/bar/baz, /foo/bar/), \
/foo/bar, \
FindCommonPathPrefix, \
))
$(eval $(call assert-equals, \
$(call FindCommonPathPrefix, foo/bar/baz, foo/bar/banan), \
foo/bar, \
FindCommonPathPrefix, \
))
$(eval $(call assert-equals, \
$(call FindCommonPathPrefix, foo/bar/baz, /foo/bar/banan), \
, \
FindCommonPathPrefix, \
))
################################################################################
# DirToDotDot
$(eval $(call assert-equals, \
$(call DirToDotDot, foo/bar/baz/), \
../../.., \
DirToDotDot, \
))
$(eval $(call assert-equals, \
$(call DirToDotDot, foo/bar), \
../.., \
DirToDotDot, \
))
$(eval $(call assert-equals, \
$(call DirToDotDot, /foo), \
.., \
DirToDotDot, \
))
################################################################################
# RelativePath
$(eval $(call assert-equals, \
$(call RelativePath, foo/bar/baz, foo/bar/banan), \
../baz, \
RelativePath, \
))
$(eval $(call assert-equals, \
$(call RelativePath, foo/bar/baz/banan/kung, foo/bar/banan/kung), \
../../baz/banan/kung, \
RelativePath, \
))
$(eval $(call assert-equals, \
$(call RelativePath, /foo/bar/baz/banan/kung, /foo/bar/banan/kung/), \
../../baz/banan/kung, \
RelativePath, \
))
################################################################################
# Test ParseKeywordVariable
KWBASE := APA=banan;GURKA=tomat;COUNT=1%202%203%204%205;SUM=1+2+3+4+5;MANY_WORDS=I have the best words.
$(eval $(call ParseKeywordVariable, KWBASE, \
KEYWORDS := APA GURKA SUM, \
STRING_KEYWORDS := COUNT MANY_WORDS, \
))
$(eval $(call assert-equals, \
$(KWBASE_APA), \
banan, \
ParseKeywordVariable failed to parse APA, \
))
$(eval $(call assert-equals, \
$(KWBASE_COUNT), \
1 2 3 4 5, \
ParseKeywordVariable failed to parse COUNT, \
))
$(eval $(call assert-equals, \
$(KWBASE_SUM), \
1+2+3+4+5, \
ParseKeywordVariable failed to parse SUM, \
))
$(eval $(call assert-equals, \
$(KWBASE_MANY_WORDS), \
I have the best words., \
ParseKeywordVariable failed to parse MANY_WORDS, \
))
# Simulate variable set from command line by using "override"
override KWBASE_WEIRD_GURKA := paprika
KWBASE_WEIRD := ;;APA=banan;;;GURKA=apelsin;APA=skansen;;
$(eval $(call ParseKeywordVariable, KWBASE_WEIRD, \
KEYWORDS := APA GURKA SUM, \
STRING_KEYWORDS := COUNT, \
))
$(eval $(call assert-equals, \
$(KWBASE_WEIRD_APA), \
skansen, \
ParseKeywordVariable failed to overwrite APA, \
))
$(eval $(call assert-equals, \
$(KWBASE_WEIRD_GURKA), \
paprika, \
ParseKeywordVariable failed to preserve GURKA, \
))
################################################################################
all: $(TEST_TARGETS)