#
# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation. Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
################################################################
#
# Check that GNU make and cygwin are recent enough.
# Setup common utility functions.
#
################################################################
ifndef _MAKEBASE_GMK
_MAKEBASE_GMK := 1
# If the variable that you want to send to stdout for piping into a file or otherwise,
# is potentially long, for example the a list of file paths, eg a list of all package directories.
# Then you need to use ListPathsSafely, which optimistically splits the output into several shell
# calls as well as use compression on recurrent file paths segments, to get around the potential
# command line length problem that exists in cygwin and other shells.
compress_pre:=$(strip $(shell $(CAT) $(SRC_ROOT)/make/common/support/ListPathsSafely-pre-compress.incl))
compress_post:=$(strip $(shell $(CAT) $(SRC_ROOT)/make/common/support/ListPathsSafely-post-compress.incl))
compress_paths=$(compress_pre)\
$(subst $(SRC_ROOT),X97,\
$(subst $(OUTPUT_ROOT),X98,\
$(subst X,X00,\
$(subst $(SPACE),\n,$(strip $1)))))\
$(compress_post)
decompress_paths=$(SED) -f $(SRC_ROOT)/make/common/support/ListPathsSafely-uncompress.sed -e 's|X99|\\n|g' \
-e 's|X98|$(OUTPUT_ROOT)|g' -e 's|X97|$(SRC_ROOT)|g' \
-e 's|X00|X|g' | tr '\n' '$2'
define ListPathsSafely_If
$(if $(word $3,$($1)),$(eval $1_LPS$3:=$(call compress_paths,$(wordlist $3,$4,$($1)))))
endef
define ListPathsSafely_Printf
$(if $(strip $($1_LPS$4)),$(if $(findstring $(LOG_LEVEL),trace),,@)printf \
-- "$(strip $($1_LPS$4))\n" | $(decompress_paths) $3)
endef
# Receipt example:
# rm -f thepaths
# $(call ListPathsSafely,THEPATHS,\n, >> thepaths)
# The \n argument means translate spaces into \n
# if instead , , (a space) is supplied, then spaces remain spaces.
define ListPathsSafely
$(if $(word 16001,$($1)),$(error Cannot list safely more than 16000 paths. $1 has $(words $($1)) paths!))
$(ECHO) $(LOG_DEBUG) Writing $(words $($1)) paths to '$3'
$(call ListPathsSafely_If,$1,$2,1,250)
$(call ListPathsSafely_If,$1,$2,251,500)
$(call ListPathsSafely_If,$1,$2,501,750)
$(call ListPathsSafely_If,$1,$2,751,1000)
$(call ListPathsSafely_If,$1,$2,1001,1250)
$(call ListPathsSafely_If,$1,$2,1251,1500)
$(call ListPathsSafely_If,$1,$2,1501,1750)
$(call ListPathsSafely_If,$1,$2,1751,2000)
$(call ListPathsSafely_If,$1,$2,2001,2250)
$(call ListPathsSafely_If,$1,$2,2251,2500)
$(call ListPathsSafely_If,$1,$2,2501,2750)
$(call ListPathsSafely_If,$1,$2,2751,3000)
$(call ListPathsSafely_If,$1,$2,3001,3250)
$(call ListPathsSafely_If,$1,$2,3251,3500)
$(call ListPathsSafely_If,$1,$2,3501,3750)
$(call ListPathsSafely_If,$1,$2,3751,4000)
$(call ListPathsSafely_If,$1,$2,4001,4250)
$(call ListPathsSafely_If,$1,$2,4251,4500)
$(call ListPathsSafely_If,$1,$2,4501,4750)
$(call ListPathsSafely_If,$1,$2,4751,5000)
$(call ListPathsSafely_If,$1,$2,5001,5250)
$(call ListPathsSafely_If,$1,$2,5251,5500)
$(call ListPathsSafely_If,$1,$2,5501,5750)
$(call ListPathsSafely_If,$1,$2,5751,6000)
$(call ListPathsSafely_If,$1,$2,6001,6250)
$(call ListPathsSafely_If,$1,$2,6251,6500)
$(call ListPathsSafely_If,$1,$2,6501,6750)
$(call ListPathsSafely_If,$1,$2,6751,7000)
$(call ListPathsSafely_If,$1,$2,7001,7250)
$(call ListPathsSafely_If,$1,$2,7251,7500)
$(call ListPathsSafely_If,$1,$2,7501,7750)
$(call ListPathsSafely_If,$1,$2,7751,8000)
$(call ListPathsSafely_If,$1,$2,8001,8250)
$(call ListPathsSafely_If,$1,$2,8251,8500)
$(call ListPathsSafely_If,$1,$2,8501,8750)
$(call ListPathsSafely_If,$1,$2,8751,9000)
$(call ListPathsSafely_If,$1,$2,9001,9250)
$(call ListPathsSafely_If,$1,$2,9251,9500)
$(call ListPathsSafely_If,$1,$2,9501,9750)
$(call ListPathsSafely_If,$1,$2,9751,10000)
$(call ListPathsSafely_If,$1,$2,10001,10250)
$(call ListPathsSafely_If,$1,$2,10251,10500)
$(call ListPathsSafely_If,$1,$2,10501,10750)
$(call ListPathsSafely_If,$1,$2,10751,11000)
$(call ListPathsSafely_If,$1,$2,11001,11250)
$(call ListPathsSafely_If,$1,$2,11251,11500)
$(call ListPathsSafely_If,$1,$2,11501,11750)
$(call ListPathsSafely_If,$1,$2,11751,12000)
$(call ListPathsSafely_If,$1,$2,12001,12250)
$(call ListPathsSafely_If,$1,$2,12251,12500)
$(call ListPathsSafely_If,$1,$2,12501,12750)
$(call ListPathsSafely_If,$1,$2,12751,13000)
$(call ListPathsSafely_If,$1,$2,13001,13250)
$(call ListPathsSafely_If,$1,$2,13251,13500)
$(call ListPathsSafely_If,$1,$2,13501,13750)
$(call ListPathsSafely_If,$1,$2,13751,14000)
$(call ListPathsSafely_If,$1,$2,14001,14250)
$(call ListPathsSafely_If,$1,$2,14251,14500)
$(call ListPathsSafely_If,$1,$2,14501,14750)
$(call ListPathsSafely_If,$1,$2,14751,15000)
$(call ListPathsSafely_If,$1,$2,15001,15250)
$(call ListPathsSafely_If,$1,$2,15251,15500)
$(call ListPathsSafely_If,$1,$2,15501,15750)
$(call ListPathsSafely_If,$1,$2,15751,16000)
$(call ListPathsSafely_Printf,$1,$2,$3,1)
$(call ListPathsSafely_Printf,$1,$2,$3,251)
$(call ListPathsSafely_Printf,$1,$2,$3,501)
$(call ListPathsSafely_Printf,$1,$2,$3,751)
$(call ListPathsSafely_Printf,$1,$2,$3,1001)
$(call ListPathsSafely_Printf,$1,$2,$3,1251)
$(call ListPathsSafely_Printf,$1,$2,$3,1501)
$(call ListPathsSafely_Printf,$1,$2,$3,1751)
$(call ListPathsSafely_Printf,$1,$2,$3,2001)
$(call ListPathsSafely_Printf,$1,$2,$3,2251)
$(call ListPathsSafely_Printf,$1,$2,$3,2501)
$(call ListPathsSafely_Printf,$1,$2,$3,2751)
$(call ListPathsSafely_Printf,$1,$2,$3,3001)
$(call ListPathsSafely_Printf,$1,$2,$3,3251)
$(call ListPathsSafely_Printf,$1,$2,$3,3501)
$(call ListPathsSafely_Printf,$1,$2,$3,3751)
$(call ListPathsSafely_Printf,$1,$2,$3,4001)
$(call ListPathsSafely_Printf,$1,$2,$3,4251)
$(call ListPathsSafely_Printf,$1,$2,$3,4501)
$(call ListPathsSafely_Printf,$1,$2,$3,4751)
$(call ListPathsSafely_Printf,$1,$2,$3,5001)
$(call ListPathsSafely_Printf,$1,$2,$3,5251)
$(call ListPathsSafely_Printf,$1,$2,$3,5501)
$(call ListPathsSafely_Printf,$1,$2,$3,5751)
$(call ListPathsSafely_Printf,$1,$2,$3,6001)
$(call ListPathsSafely_Printf,$1,$2,$3,6251)
$(call ListPathsSafely_Printf,$1,$2,$3,6501)
$(call ListPathsSafely_Printf,$1,$2,$3,6751)
$(call ListPathsSafely_Printf,$1,$2,$3,7001)
$(call ListPathsSafely_Printf,$1,$2,$3,7251)
$(call ListPathsSafely_Printf,$1,$2,$3,7501)
$(call ListPathsSafely_Printf,$1,$2,$3,7751)
$(call ListPathsSafely_Printf,$1,$2,$3,8001)
$(call ListPathsSafely_Printf,$1,$2,$3,8251)
$(call ListPathsSafely_Printf,$1,$2,$3,8501)
$(call ListPathsSafely_Printf,$1,$2,$3,8751)
$(call ListPathsSafely_Printf,$1,$2,$3,9001)
$(call ListPathsSafely_Printf,$1,$2,$3,9251)
$(call ListPathsSafely_Printf,$1,$2,$3,9501)
$(call ListPathsSafely_Printf,$1,$2,$3,9751)
$(call ListPathsSafely_Printf,$1,$2,$3,10001)
$(call ListPathsSafely_Printf,$1,$2,$3,10251)
$(call ListPathsSafely_Printf,$1,$2,$3,10501)
$(call ListPathsSafely_Printf,$1,$2,$3,10751)
$(call ListPathsSafely_Printf,$1,$2,$3,11001)
$(call ListPathsSafely_Printf,$1,$2,$3,11251)
$(call ListPathsSafely_Printf,$1,$2,$3,11501)
$(call ListPathsSafely_Printf,$1,$2,$3,11751)
$(call ListPathsSafely_Printf,$1,$2,$3,12001)
$(call ListPathsSafely_Printf,$1,$2,$3,12251)
$(call ListPathsSafely_Printf,$1,$2,$3,12501)
$(call ListPathsSafely_Printf,$1,$2,$3,12751)
$(call ListPathsSafely_Printf,$1,$2,$3,13001)
$(call ListPathsSafely_Printf,$1,$2,$3,13251)
$(call ListPathsSafely_Printf,$1,$2,$3,13501)
$(call ListPathsSafely_Printf,$1,$2,$3,13751)
$(call ListPathsSafely_Printf,$1,$2,$3,14001)
$(call ListPathsSafely_Printf,$1,$2,$3,14251)
$(call ListPathsSafely_Printf,$1,$2,$3,14501)
$(call ListPathsSafely_Printf,$1,$2,$3,14751)
$(call ListPathsSafely_Printf,$1,$2,$3,15001)
$(call ListPathsSafely_Printf,$1,$2,$3,15251)
$(call ListPathsSafely_Printf,$1,$2,$3,15501)
$(call ListPathsSafely_Printf,$1,$2,$3,15751)
endef
define ListPathsSafelyNow_IfPrintf
ifneq (,$$(word $4,$$($1)))
$$(eval $1_LPS$4:=$$(call compress_paths,$$(wordlist $4,$5,$$($1))))
$$(shell printf -- "$$(strip $$($1_LPS$4))\n" | $(decompress_paths) $3)
endif
endef
# And an non-receipt version:
define ListPathsSafelyNow
ifneq (,$$(word 10001,$$($1)))
$$(error Cannot list safely more than 10000 paths. $1 has $$(words $$($1)) paths!)
endif
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1,250)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,251,500)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,501,750)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,751,1000)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1001,1250)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1251,1500)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1501,1750)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1751,2000)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2001,2250)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2251,2500)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2501,2750)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2751,3000)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3001,3250)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3251,3500)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3501,3750)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3751,4000)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4001,4250)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4251,4500)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4501,4750)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4751,5000)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5001,5250)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5251,5500)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5501,5750)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5751,6000)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6001,6250)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6251,6500)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6501,6750)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6751,7000)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7001,7250)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7251,7500)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7501,7750)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7751,8000)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8001,8250)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8251,8500)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8501,8750)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8751,9000)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9001,9250)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9251,9500)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9501,9750)
$(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9751,10000)
endef
# The source tips can come from the Mercurial repository, or in the files
# $(HGTIP_FILENAME) which contains the tip but is also positioned in the same
# directory as the original $(HGDIR) directory.
# These should not be := assignments, only used from the root Makefile.
HG_VERSION = $(shell $(HG) version 2> /dev/null)
HG_DIRECTORY=.hg
HGTIP_FILENAME=.hgtip
HG_SEARCH = ./REPO ./*/REPO ./*/*/REPO ./*/*/*/REPO
REPO_LIST = $(patsubst ./%,%,$(patsubst %/,%,$(sort $(dir \
$(shell $(CD) $(SRC_ROOT) ; ( $(LS) -d $(HG_SEARCH:%/REPO=%/$(HG_DIRECTORY)) ; \
$(LS) $(HG_SEARCH:%/REPO=%/$(HGTIP_FILENAME)) ) \
2> /dev/null)))))
# Emit the repo:tip pairs to $@
define GetSourceTips
$(CD) $(SRC_ROOT) ; \
for i in $(REPO_LIST) IGNORE ; do \
if [ "$${i}" = "IGNORE" ] ; then \
continue; \
elif [ -d $${i}/$(HG_DIRECTORY) -a "$(HG_VERSION)" != "" ] ; then \
$(PRINTF) " %s:%s" \
"$${i}" `$(HG) tip --repository $${i} --template '{node|short}\n'` ; \
elif [ -f $${i}/$(HGTIP_FILENAME) ] ; then \
$(PRINTF) " %s:%s" \
"$${i}" `$(CAT) $${i}/$(HGTIP_FILENAME)` ; \
fi; \
done >> $@
$(PRINTF) "\n" >> $@
endef
# Create the HGTIP_FILENAME file. Called from jdk/make/closed/bundles.gmk
define CreateHgTip
$(HG) tip --repository $1 --template '{node|short}\n' > $1/$(HGTIP_FILENAME); \
$(ECHO) $1/$(HGTIP_FILENAME)
endef
define SetupLogging
ifeq ($$(LOG_LEVEL),trace)
# Shell redefinition trick inspired by http://www.cmcrossroads.com/ask-mr-make/6535-tracing-rule-execution-in-gnu-make
# For each target executed, will print
# Building <TARGET> (from <FIRST PREREQUISITE>) (<ALL NEWER PREREQUISITES> newer)
# but with a limit of 20 on <ALL NEWER PREREQUISITES>, to avoid cluttering logs too much
# (and causing a crash on Cygwin).
# Default shell seems to always be /bin/sh. Must override with bash to get this to work on Solaris.
# Only use time if it's GNU time which supports format and output file.
WRAPPER_SHELL:=/bin/bash $$(SRC_ROOT)/common/bin/shell-tracer.sh $$(if $$(findstring yes,$$(IS_GNU_TIME)),$$(TIME),-) $$(OUTPUT_ROOT)/build-trace-time.log /bin/bash
SHELL=$$(warning $$(if $$@,Building $$@,Running shell command) $$(if $$<, (from $$<))$$(if $$?, ($$(wordlist 1, 20, $$?) $$(if $$(wordlist 21, 22, $$?), ... [in total $$(words $$?) files]) newer)))$$(WRAPPER_SHELL)
endif
# Never remove warning messages; this is just for completeness
LOG_WARN=
ifneq ($$(findstring $$(LOG_LEVEL),info debug trace),)
LOG_INFO=
else
LOG_INFO=> /dev/null
endif
ifneq ($$(findstring $$(LOG_LEVEL),debug trace),)
LOG_DEBUG=
else
LOG_DEBUG=> /dev/null
endif
ifneq ($$(findstring $$(LOG_LEVEL),trace),)
LOG_TRACE=
else
LOG_TRACE=> /dev/null
endif
endef
# Make sure logging is setup for everyone that includes MakeBase.gmk.
$(eval $(call SetupLogging))
# This is to be called by all SetupFoo macros
define LogSetupMacroEntry
$(if $(27),$(error Internal makefile error: Too many arguments to LogSetupMacroEntry, please update MakeBase.gmk))
$(if $(findstring $(LOG_LEVEL),debug trace), $(info $1 $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26,$(if $($i),$(NEWLINE) $(strip [$i] $($i))))))
endef
# Make directory without forking mkdir if not needed
define MakeDir
ifneq ($$(wildcard $1 $2 $3 $4 $5 $6 $7 $8 $9),$$(strip $1 $2 $3 $4 $5 $6 $7 $8 $9))
$$(shell $(MKDIR) -p $1 $2 $3 $4 $5 $6 $7 $8 $9)
endif
endef
ifeq ($(OPENJDK_TARGET_OS),solaris)
# On Solaris, if the target is a symlink and exists, cp won't overwrite.
# Cp has to operate in recursive mode to allow for -P flag, to preserve soft links. If the
# name of the target file differs from the source file, rename after copy.
# If the source and target parent directories are the same, recursive copy doesn't work
# so we fall back on regular copy, which isn't preserving symlinks.
define install-file
$(MKDIR) -p $(@D)
$(RM) '$@'
if [ "$(@D)" != "$(<D)" ]; then \
$(CP) -f -r -P '$<' '$(@D)'; \
if [ "$(@F)" != "$(<F)" ]; then \
$(MV) '$(@D)/$(<F)' '$@'; \
fi; \
else \
if [ -L '$<' ]; then \
$(ECHO) "Source file is a symlink and target is in the same directory: $< $@" ; \
exit 1; \
fi; \
$(CP) -f '$<' '$@'; \
fi
endef
else ifeq ($(OPENJDK_TARGET_OS),macosx)
# On mac, extended attributes sometimes creep into the source files, which may later
# cause the creation of ._* files which confuses testing. Clear these with xattr if
# set. Some files get their write permissions removed after being copied to the
# output dir. When these are copied again to images, xattr would fail. By only clearing
# attributes when they are present, failing on this is avoided.
define install-file
$(MKDIR) -p $(@D)
$(CP) -fRP '$<' '$@'
if [ -n "`$(XATTR) -l '$@'`" ]; then $(XATTR) -c '$@'; fi
endef
else
define install-file
$(MKDIR) -p $(@D)
$(CP) -fP '$<' '$@'
endef
endif
# Convenience functions for working around make's limitations with $(filter ).
containing = $(foreach v,$2,$(if $(findstring $1,$v),$v))
not-containing = $(foreach v,$2,$(if $(findstring $1,$v),,$v))
ifneq ($(DISABLE_CACHE_FIND), true)
################################################################################
# In Cygwin, finds are very costly, both because of expensive forks and because
# of bad file system caching. Find is used extensively in $(shell) commands to
# find source files. This makes rerunning make with no or few changes rather
# expensive. To speed this up, these two macros are used to cache the results
# of simple find commands for reuse.
#
# Runs a find and stores both the directories where it was run and the results.
# This macro can be called multiple times to add to the cache. Only finds files
# with no filters.
#
# Needs to be called with $(eval )
#
# Even if the performance benifit is negligible on other platforms, keep the
# functionality active unless explicitly disabled to exercise it more.
#
# Initialize FIND_CACHE_DIRS with := to make it a non recursively-expanded variable
FIND_CACHE_DIRS :=
# Param 1 - Dirs to find in
# Param 2 - (optional) specialization. Normally "-a \( ... \)" expression.
define FillCacheFind
# Filter out already cached dirs. The - is needed when FIND_CACHE_DIRS is empty
# since filter out will then return empty.
FIND_CACHE_NEW_DIRS := $$(filter-out $$(addsuffix /%,\
- $(FIND_CACHE_DIRS)) $(FIND_CACHE_DIRS), $1)
ifneq ($$(FIND_CACHE_NEW_DIRS), )
# Remove any trailing slash from dirs in the cache dir list
FIND_CACHE_DIRS += $$(patsubst %/,%, $$(FIND_CACHE_NEW_DIRS))
FIND_CACHE := $$(sort $$(FIND_CACHE) $$(shell $(FIND) $$(FIND_CACHE_NEW_DIRS) \( -type f -o -type l \) $2))
endif
endef
# Mimics find by looking in the cache if all of the directories have been cached.
# Otherwise reverts to shell find. This is safe to call on all platforms, even if
# cache is deactivated.
#
# The extra - is needed when FIND_CACHE_DIRS is empty but should be harmless.
#
# Param 1 - Dirs to find in
# Param 2 - (optional) specialization. Normally "-a \( ... \)" expression.
define CacheFind
$(if $(filter-out $(addsuffix /%,- $(FIND_CACHE_DIRS)) $(FIND_CACHE_DIRS),$1), \
$(shell $(FIND) $1 \( -type f -o -type l \) $2), \
$(filter $(addsuffix %,$1),$(FIND_CACHE)))
endef
else
# If CacheFind is disabled, just run the find command.
# Param 1 - Dirs to find in
# Param 2 - (optional) specialization. Normally "-a \( ... \)" expression.
define CacheFind
$(shell $(FIND) $1 \( -type f -o -type l \) $2)
endef
endif
################################################################################
endif # _MAKEBASE_GMK