7184394: add intrinsics to use AES instructions
Summary: Use new x86 AES instructions for AESCrypt.
Reviewed-by: twisti, kvn, roland
Contributed-by: tom.deneau@amd.com
/*
* Copyright (c) 1997, 2012, Oracle and/or its affiliates. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*
*/
#include "precompiled.hpp"
#include "interp_masm_x86_32.hpp"
#include "interpreter/interpreter.hpp"
#include "interpreter/interpreterRuntime.hpp"
#include "oops/arrayOop.hpp"
#include "oops/markOop.hpp"
#include "oops/methodData.hpp"
#include "oops/method.hpp"
#include "prims/jvmtiExport.hpp"
#include "prims/jvmtiRedefineClassesTrace.hpp"
#include "prims/jvmtiThreadState.hpp"
#include "runtime/basicLock.hpp"
#include "runtime/biasedLocking.hpp"
#include "runtime/sharedRuntime.hpp"
#ifdef TARGET_OS_FAMILY_linux
# include "thread_linux.inline.hpp"
#endif
#ifdef TARGET_OS_FAMILY_solaris
# include "thread_solaris.inline.hpp"
#endif
#ifdef TARGET_OS_FAMILY_windows
# include "thread_windows.inline.hpp"
#endif
#ifdef TARGET_OS_FAMILY_bsd
# include "thread_bsd.inline.hpp"
#endif
// Implementation of InterpreterMacroAssembler
#ifdef CC_INTERP
void InterpreterMacroAssembler::get_method(Register reg) {
movptr(reg, Address(rbp, -(sizeof(BytecodeInterpreter) + 2 * wordSize)));
movptr(reg, Address(reg, byte_offset_of(BytecodeInterpreter, _method)));
}
#endif // CC_INTERP
#ifndef CC_INTERP
void InterpreterMacroAssembler::call_VM_leaf_base(
address entry_point,
int number_of_arguments
) {
// interpreter specific
//
// Note: No need to save/restore bcp & locals (rsi & rdi) pointer
// since these are callee saved registers and no blocking/
// GC can happen in leaf calls.
// Further Note: DO NOT save/restore bcp/locals. If a caller has
// already saved them so that it can use rsi/rdi as temporaries
// then a save/restore here will DESTROY the copy the caller
// saved! There used to be a save_bcp() that only happened in
// the ASSERT path (no restore_bcp). Which caused bizarre failures
// when jvm built with ASSERTs.
#ifdef ASSERT
{ Label L;
cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
jcc(Assembler::equal, L);
stop("InterpreterMacroAssembler::call_VM_leaf_base: last_sp != NULL");
bind(L);
}
#endif
// super call
MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments);
// interpreter specific
// Used to ASSERT that rsi/rdi were equal to frame's bcp/locals
// but since they may not have been saved (and we don't want to
// save them here (see note above) the assert is invalid.
}
void InterpreterMacroAssembler::call_VM_base(
Register oop_result,
Register java_thread,
Register last_java_sp,
address entry_point,
int number_of_arguments,
bool check_exceptions
) {
#ifdef ASSERT
{ Label L;
cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
jcc(Assembler::equal, L);
stop("InterpreterMacroAssembler::call_VM_base: last_sp != NULL");
bind(L);
}
#endif /* ASSERT */
// interpreter specific
//
// Note: Could avoid restoring locals ptr (callee saved) - however doesn't
// really make a difference for these runtime calls, since they are
// slow anyway. Btw., bcp must be saved/restored since it may change
// due to GC.
assert(java_thread == noreg , "not expecting a precomputed java thread");
save_bcp();
// super call
MacroAssembler::call_VM_base(oop_result, java_thread, last_java_sp, entry_point, number_of_arguments, check_exceptions);
// interpreter specific
restore_bcp();
restore_locals();
}
void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) {
if (JvmtiExport::can_pop_frame()) {
Label L;
// Initiate popframe handling only if it is not already being processed. If the flag
// has the popframe_processing bit set, it means that this code is called *during* popframe
// handling - we don't want to reenter.
Register pop_cond = java_thread; // Not clear if any other register is available...
movl(pop_cond, Address(java_thread, JavaThread::popframe_condition_offset()));
testl(pop_cond, JavaThread::popframe_pending_bit);
jcc(Assembler::zero, L);
testl(pop_cond, JavaThread::popframe_processing_bit);
jcc(Assembler::notZero, L);
// Call Interpreter::remove_activation_preserving_args_entry() to get the
// address of the same-named entrypoint in the generated interpreter code.
call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry));
jmp(rax);
bind(L);
get_thread(java_thread);
}
}
void InterpreterMacroAssembler::load_earlyret_value(TosState state) {
get_thread(rcx);
movl(rcx, Address(rcx, JavaThread::jvmti_thread_state_offset()));
const Address tos_addr (rcx, JvmtiThreadState::earlyret_tos_offset());
const Address oop_addr (rcx, JvmtiThreadState::earlyret_oop_offset());
const Address val_addr (rcx, JvmtiThreadState::earlyret_value_offset());
const Address val_addr1(rcx, JvmtiThreadState::earlyret_value_offset()
+ in_ByteSize(wordSize));
switch (state) {
case atos: movptr(rax, oop_addr);
movptr(oop_addr, NULL_WORD);
verify_oop(rax, state); break;
case ltos:
movl(rdx, val_addr1); // fall through
case btos: // fall through
case ctos: // fall through
case stos: // fall through
case itos: movl(rax, val_addr); break;
case ftos: fld_s(val_addr); break;
case dtos: fld_d(val_addr); break;
case vtos: /* nothing to do */ break;
default : ShouldNotReachHere();
}
// Clean up tos value in the thread object
movl(tos_addr, (int32_t) ilgl);
movptr(val_addr, NULL_WORD);
NOT_LP64(movptr(val_addr1, NULL_WORD));
}
void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) {
if (JvmtiExport::can_force_early_return()) {
Label L;
Register tmp = java_thread;
movptr(tmp, Address(tmp, JavaThread::jvmti_thread_state_offset()));
testptr(tmp, tmp);
jcc(Assembler::zero, L); // if (thread->jvmti_thread_state() == NULL) exit;
// Initiate earlyret handling only if it is not already being processed.
// If the flag has the earlyret_processing bit set, it means that this code
// is called *during* earlyret handling - we don't want to reenter.
movl(tmp, Address(tmp, JvmtiThreadState::earlyret_state_offset()));
cmpl(tmp, JvmtiThreadState::earlyret_pending);
jcc(Assembler::notEqual, L);
// Call Interpreter::remove_activation_early_entry() to get the address of the
// same-named entrypoint in the generated interpreter code.
get_thread(java_thread);
movptr(tmp, Address(java_thread, JavaThread::jvmti_thread_state_offset()));
pushl(Address(tmp, JvmtiThreadState::earlyret_tos_offset()));
call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), 1);
jmp(rax);
bind(L);
get_thread(java_thread);
}
}
void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(Register reg, int bcp_offset) {
assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode");
movl(reg, Address(rsi, bcp_offset));
bswapl(reg);
shrl(reg, 16);
}
void InterpreterMacroAssembler::get_cache_index_at_bcp(Register reg, int bcp_offset, size_t index_size) {
assert(bcp_offset > 0, "bcp is still pointing to start of bytecode");
if (index_size == sizeof(u2)) {
load_unsigned_short(reg, Address(rsi, bcp_offset));
} else if (index_size == sizeof(u4)) {
assert(EnableInvokeDynamic, "giant index used only for JSR 292");
movl(reg, Address(rsi, bcp_offset));
// Check if the secondary index definition is still ~x, otherwise
// we have to change the following assembler code to calculate the
// plain index.
assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line");
notl(reg); // convert to plain index
} else if (index_size == sizeof(u1)) {
load_unsigned_byte(reg, Address(rsi, bcp_offset));
} else {
ShouldNotReachHere();
}
}
void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, Register index,
int bcp_offset, size_t index_size) {
assert_different_registers(cache, index);
get_cache_index_at_bcp(index, bcp_offset, index_size);
movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize));
assert(sizeof(ConstantPoolCacheEntry) == 4*wordSize, "adjust code below");
assert(exact_log2(in_words(ConstantPoolCacheEntry::size())) == 2, "else change next line");
shlptr(index, 2); // convert from field index to ConstantPoolCacheEntry index
}
void InterpreterMacroAssembler::get_cache_and_index_and_bytecode_at_bcp(Register cache,
Register index,
Register bytecode,
int byte_no,
int bcp_offset,
size_t index_size) {
get_cache_and_index_at_bcp(cache, index, bcp_offset, index_size);
movptr(bytecode, Address(cache, index, Address::times_ptr, ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::indices_offset()));
const int shift_count = (1 + byte_no) * BitsPerByte;
assert((byte_no == TemplateTable::f1_byte && shift_count == ConstantPoolCacheEntry::bytecode_1_shift) ||
(byte_no == TemplateTable::f2_byte && shift_count == ConstantPoolCacheEntry::bytecode_2_shift),
"correct shift count");
shrptr(bytecode, shift_count);
assert(ConstantPoolCacheEntry::bytecode_1_mask == ConstantPoolCacheEntry::bytecode_2_mask, "common mask");
andptr(bytecode, ConstantPoolCacheEntry::bytecode_1_mask);
}
void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache, Register tmp,
int bcp_offset, size_t index_size) {
assert(cache != tmp, "must use different register");
get_cache_index_at_bcp(tmp, bcp_offset, index_size);
assert(sizeof(ConstantPoolCacheEntry) == 4*wordSize, "adjust code below");
// convert from field index to ConstantPoolCacheEntry index
// and from word offset to byte offset
assert(exact_log2(in_bytes(ConstantPoolCacheEntry::size_in_bytes())) == 2 + LogBytesPerWord, "else change next line");
shll(tmp, 2 + LogBytesPerWord);
movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize));
// skip past the header
addptr(cache, in_bytes(ConstantPoolCache::base_offset()));
addptr(cache, tmp); // construct pointer to cache entry
}
// Load object from cpool->resolved_references(index)
void InterpreterMacroAssembler::load_resolved_reference_at_index(
Register result, Register index) {
assert_different_registers(result, index);
// convert from field index to resolved_references() index and from
// word index to byte offset. Since this is a java object, it can be compressed
Register tmp = index; // reuse
shll(tmp, LogBytesPerHeapOop);
get_constant_pool(result);
// load pointer for resolved_references[] objArray
movptr(result, Address(result, ConstantPool::resolved_references_offset_in_bytes()));
// JNIHandles::resolve(obj);
movptr(result, Address(result, 0));
// Add in the index
addptr(result, tmp);
load_heap_oop(result, Address(result, arrayOopDesc::base_offset_in_bytes(T_OBJECT)));
}
// Generate a subtype check: branch to ok_is_subtype if sub_klass is
// a subtype of super_klass. EAX holds the super_klass. Blows ECX.
// Resets EDI to locals. Register sub_klass cannot be any of the above.
void InterpreterMacroAssembler::gen_subtype_check( Register Rsub_klass, Label &ok_is_subtype ) {
assert( Rsub_klass != rax, "rax, holds superklass" );
assert( Rsub_klass != rcx, "used as a temp" );
assert( Rsub_klass != rdi, "used as a temp, restored from locals" );
// Profile the not-null value's klass.
profile_typecheck(rcx, Rsub_klass, rdi); // blows rcx, reloads rdi
// Do the check.
check_klass_subtype(Rsub_klass, rax, rcx, ok_is_subtype); // blows rcx
// Profile the failure of the check.
profile_typecheck_failed(rcx); // blows rcx
}
void InterpreterMacroAssembler::f2ieee() {
if (IEEEPrecision) {
fstp_s(Address(rsp, 0));
fld_s(Address(rsp, 0));
}
}
void InterpreterMacroAssembler::d2ieee() {
if (IEEEPrecision) {
fstp_d(Address(rsp, 0));
fld_d(Address(rsp, 0));
}
}
// Java Expression Stack
void InterpreterMacroAssembler::pop_ptr(Register r) {
pop(r);
}
void InterpreterMacroAssembler::pop_i(Register r) {
pop(r);
}
void InterpreterMacroAssembler::pop_l(Register lo, Register hi) {
pop(lo);
pop(hi);
}
void InterpreterMacroAssembler::pop_f() {
fld_s(Address(rsp, 0));
addptr(rsp, 1 * wordSize);
}
void InterpreterMacroAssembler::pop_d() {
fld_d(Address(rsp, 0));
addptr(rsp, 2 * wordSize);
}
void InterpreterMacroAssembler::pop(TosState state) {
switch (state) {
case atos: pop_ptr(rax); break;
case btos: // fall through
case ctos: // fall through
case stos: // fall through
case itos: pop_i(rax); break;
case ltos: pop_l(rax, rdx); break;
case ftos: pop_f(); break;
case dtos: pop_d(); break;
case vtos: /* nothing to do */ break;
default : ShouldNotReachHere();
}
verify_oop(rax, state);
}
void InterpreterMacroAssembler::push_ptr(Register r) {
push(r);
}
void InterpreterMacroAssembler::push_i(Register r) {
push(r);
}
void InterpreterMacroAssembler::push_l(Register lo, Register hi) {
push(hi);
push(lo);
}
void InterpreterMacroAssembler::push_f() {
// Do not schedule for no AGI! Never write beyond rsp!
subptr(rsp, 1 * wordSize);
fstp_s(Address(rsp, 0));
}
void InterpreterMacroAssembler::push_d(Register r) {
// Do not schedule for no AGI! Never write beyond rsp!
subptr(rsp, 2 * wordSize);
fstp_d(Address(rsp, 0));
}
void InterpreterMacroAssembler::push(TosState state) {
verify_oop(rax, state);
switch (state) {
case atos: push_ptr(rax); break;
case btos: // fall through
case ctos: // fall through
case stos: // fall through
case itos: push_i(rax); break;
case ltos: push_l(rax, rdx); break;
case ftos: push_f(); break;
case dtos: push_d(rax); break;
case vtos: /* nothing to do */ break;
default : ShouldNotReachHere();
}
}
// Helpers for swap and dup
void InterpreterMacroAssembler::load_ptr(int n, Register val) {
movptr(val, Address(rsp, Interpreter::expr_offset_in_bytes(n)));
}
void InterpreterMacroAssembler::store_ptr(int n, Register val) {
movptr(Address(rsp, Interpreter::expr_offset_in_bytes(n)), val);
}
void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() {
// set sender sp
lea(rsi, Address(rsp, wordSize));
// record last_sp
movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), rsi);
}
// Jump to from_interpreted entry of a call unless single stepping is possible
// in this thread in which case we must call the i2i entry
void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) {
prepare_to_jump_from_interpreted();
if (JvmtiExport::can_post_interpreter_events()) {
Label run_compiled_code;
// JVMTI events, such as single-stepping, are implemented partly by avoiding running
// compiled code in threads for which the event is enabled. Check here for
// interp_only_mode if these events CAN be enabled.
get_thread(temp);
// interp_only is an int, on little endian it is sufficient to test the byte only
// Is a cmpl faster?
cmpb(Address(temp, JavaThread::interp_only_mode_offset()), 0);
jccb(Assembler::zero, run_compiled_code);
jmp(Address(method, Method::interpreter_entry_offset()));
bind(run_compiled_code);
}
jmp(Address(method, Method::from_interpreted_offset()));
}
// The following two routines provide a hook so that an implementation
// can schedule the dispatch in two parts. Intel does not do this.
void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) {
// Nothing Intel-specific to be done here.
}
void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) {
dispatch_next(state, step);
}
void InterpreterMacroAssembler::dispatch_base(TosState state, address* table,
bool verifyoop) {
verify_FPU(1, state);
if (VerifyActivationFrameSize) {
Label L;
mov(rcx, rbp);
subptr(rcx, rsp);
int min_frame_size = (frame::link_offset - frame::interpreter_frame_initial_sp_offset) * wordSize;
cmpptr(rcx, min_frame_size);
jcc(Assembler::greaterEqual, L);
stop("broken stack frame");
bind(L);
}
if (verifyoop) verify_oop(rax, state);
Address index(noreg, rbx, Address::times_ptr);
ExternalAddress tbl((address)table);
ArrayAddress dispatch(tbl, index);
jump(dispatch);
}
void InterpreterMacroAssembler::dispatch_only(TosState state) {
dispatch_base(state, Interpreter::dispatch_table(state));
}
void InterpreterMacroAssembler::dispatch_only_normal(TosState state) {
dispatch_base(state, Interpreter::normal_table(state));
}
void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) {
dispatch_base(state, Interpreter::normal_table(state), false);
}
void InterpreterMacroAssembler::dispatch_next(TosState state, int step) {
// load next bytecode (load before advancing rsi to prevent AGI)
load_unsigned_byte(rbx, Address(rsi, step));
// advance rsi
increment(rsi, step);
dispatch_base(state, Interpreter::dispatch_table(state));
}
void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) {
// load current bytecode
load_unsigned_byte(rbx, Address(rsi, 0));
dispatch_base(state, table);
}
// remove activation
//
// Unlock the receiver if this is a synchronized method.
// Unlock any Java monitors from syncronized blocks.
// Remove the activation from the stack.
//
// If there are locked Java monitors
// If throw_monitor_exception
// throws IllegalMonitorStateException
// Else if install_monitor_exception
// installs IllegalMonitorStateException
// Else
// no error processing
void InterpreterMacroAssembler::remove_activation(TosState state, Register ret_addr,
bool throw_monitor_exception,
bool install_monitor_exception,
bool notify_jvmdi) {
// Note: Registers rax, rdx and FPU ST(0) may be in use for the result
// check if synchronized method
Label unlocked, unlock, no_unlock;
get_thread(rcx);
const Address do_not_unlock_if_synchronized(rcx,
in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
movbool(rbx, do_not_unlock_if_synchronized);
mov(rdi,rbx);
movbool(do_not_unlock_if_synchronized, false); // reset the flag
movptr(rbx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); // get method access flags
movl(rcx, Address(rbx, Method::access_flags_offset()));
testl(rcx, JVM_ACC_SYNCHRONIZED);
jcc(Assembler::zero, unlocked);
// Don't unlock anything if the _do_not_unlock_if_synchronized flag
// is set.
mov(rcx,rdi);
testbool(rcx);
jcc(Assembler::notZero, no_unlock);
// unlock monitor
push(state); // save result
// BasicObjectLock will be first in list, since this is a synchronized method. However, need
// to check that the object has not been unlocked by an explicit monitorexit bytecode.
const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset * wordSize - (int)sizeof(BasicObjectLock));
lea (rdx, monitor); // address of first monitor
movptr (rax, Address(rdx, BasicObjectLock::obj_offset_in_bytes()));
testptr(rax, rax);
jcc (Assembler::notZero, unlock);
pop(state);
if (throw_monitor_exception) {
empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow
// Entry already unlocked, need to throw exception
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception));
should_not_reach_here();
} else {
// Monitor already unlocked during a stack unroll.
// If requested, install an illegal_monitor_state_exception.
// Continue with stack unrolling.
if (install_monitor_exception) {
empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception));
}
jmp(unlocked);
}
bind(unlock);
unlock_object(rdx);
pop(state);
// Check that for block-structured locking (i.e., that all locked objects has been unlocked)
bind(unlocked);
// rax, rdx: Might contain return value
// Check that all monitors are unlocked
{
Label loop, exception, entry, restart;
const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
const Address monitor_block_top(rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize);
const Address monitor_block_bot(rbp, frame::interpreter_frame_initial_sp_offset * wordSize);
bind(restart);
movptr(rcx, monitor_block_top); // points to current entry, starting with top-most entry
lea(rbx, monitor_block_bot); // points to word before bottom of monitor block
jmp(entry);
// Entry already locked, need to throw exception
bind(exception);
if (throw_monitor_exception) {
empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow
// Throw exception
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception));
should_not_reach_here();
} else {
// Stack unrolling. Unlock object and install illegal_monitor_exception
// Unlock does not block, so don't have to worry about the frame
push(state);
mov(rdx, rcx);
unlock_object(rdx);
pop(state);
if (install_monitor_exception) {
empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception));
}
jmp(restart);
}
bind(loop);
cmpptr(Address(rcx, BasicObjectLock::obj_offset_in_bytes()), (int32_t)NULL_WORD); // check if current entry is used
jcc(Assembler::notEqual, exception);
addptr(rcx, entry_size); // otherwise advance to next entry
bind(entry);
cmpptr(rcx, rbx); // check if bottom reached
jcc(Assembler::notEqual, loop); // if not at bottom then check this entry
}
bind(no_unlock);
// jvmti support
if (notify_jvmdi) {
notify_method_exit(state, NotifyJVMTI); // preserve TOSCA
} else {
notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA
}
// remove activation
movptr(rbx, Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize)); // get sender sp
leave(); // remove frame anchor
pop(ret_addr); // get return address
mov(rsp, rbx); // set sp to sender sp
if (UseSSE) {
// float and double are returned in xmm register in SSE-mode
if (state == ftos && UseSSE >= 1) {
subptr(rsp, wordSize);
fstp_s(Address(rsp, 0));
movflt(xmm0, Address(rsp, 0));
addptr(rsp, wordSize);
} else if (state == dtos && UseSSE >= 2) {
subptr(rsp, 2*wordSize);
fstp_d(Address(rsp, 0));
movdbl(xmm0, Address(rsp, 0));
addptr(rsp, 2*wordSize);
}
}
}
#endif /* !CC_INTERP */
// Lock object
//
// Argument: rdx : Points to BasicObjectLock to be used for locking. Must
// be initialized with object to lock
void InterpreterMacroAssembler::lock_object(Register lock_reg) {
assert(lock_reg == rdx, "The argument is only for looks. It must be rdx");
if (UseHeavyMonitors) {
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg);
} else {
Label done;
const Register swap_reg = rax; // Must use rax, for cmpxchg instruction
const Register obj_reg = rcx; // Will contain the oop
const int obj_offset = BasicObjectLock::obj_offset_in_bytes();
const int lock_offset = BasicObjectLock::lock_offset_in_bytes ();
const int mark_offset = lock_offset + BasicLock::displaced_header_offset_in_bytes();
Label slow_case;
// Load object pointer into obj_reg %rcx
movptr(obj_reg, Address(lock_reg, obj_offset));
if (UseBiasedLocking) {
// Note: we use noreg for the temporary register since it's hard
// to come up with a free register on all incoming code paths
biased_locking_enter(lock_reg, obj_reg, swap_reg, noreg, false, done, &slow_case);
}
// Load immediate 1 into swap_reg %rax,
movptr(swap_reg, (int32_t)1);
// Load (object->mark() | 1) into swap_reg %rax,
orptr(swap_reg, Address(obj_reg, 0));
// Save (object->mark() | 1) into BasicLock's displaced header
movptr(Address(lock_reg, mark_offset), swap_reg);
assert(lock_offset == 0, "displached header must be first word in BasicObjectLock");
if (os::is_MP()) {
lock();
}
cmpxchgptr(lock_reg, Address(obj_reg, 0));
if (PrintBiasedLockingStatistics) {
cond_inc32(Assembler::zero,
ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr()));
}
jcc(Assembler::zero, done);
// Test if the oopMark is an obvious stack pointer, i.e.,
// 1) (mark & 3) == 0, and
// 2) rsp <= mark < mark + os::pagesize()
//
// These 3 tests can be done by evaluating the following
// expression: ((mark - rsp) & (3 - os::vm_page_size())),
// assuming both stack pointer and pagesize have their
// least significant 2 bits clear.
// NOTE: the oopMark is in swap_reg %rax, as the result of cmpxchg
subptr(swap_reg, rsp);
andptr(swap_reg, 3 - os::vm_page_size());
// Save the test result, for recursive case, the result is zero
movptr(Address(lock_reg, mark_offset), swap_reg);
if (PrintBiasedLockingStatistics) {
cond_inc32(Assembler::zero,
ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr()));
}
jcc(Assembler::zero, done);
bind(slow_case);
// Call the runtime routine for slow case
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg);
bind(done);
}
}
// Unlocks an object. Used in monitorexit bytecode and remove_activation.
//
// Argument: rdx : Points to BasicObjectLock structure for lock
// Throw an IllegalMonitorException if object is not locked by current thread
//
// Uses: rax, rbx, rcx, rdx
void InterpreterMacroAssembler::unlock_object(Register lock_reg) {
assert(lock_reg == rdx, "The argument is only for looks. It must be rdx");
if (UseHeavyMonitors) {
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg);
} else {
Label done;
const Register swap_reg = rax; // Must use rax, for cmpxchg instruction
const Register header_reg = rbx; // Will contain the old oopMark
const Register obj_reg = rcx; // Will contain the oop
save_bcp(); // Save in case of exception
// Convert from BasicObjectLock structure to object and BasicLock structure
// Store the BasicLock address into %rax,
lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes()));
// Load oop into obj_reg(%rcx)
movptr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes ()));
// Free entry
movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), NULL_WORD);
if (UseBiasedLocking) {
biased_locking_exit(obj_reg, header_reg, done);
}
// Load the old header from BasicLock structure
movptr(header_reg, Address(swap_reg, BasicLock::displaced_header_offset_in_bytes()));
// Test for recursion
testptr(header_reg, header_reg);
// zero for recursive case
jcc(Assembler::zero, done);
// Atomic swap back the old header
if (os::is_MP()) lock();
cmpxchgptr(header_reg, Address(obj_reg, 0));
// zero for recursive case
jcc(Assembler::zero, done);
// Call the runtime routine for slow case.
movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), obj_reg); // restore obj
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg);
bind(done);
restore_bcp();
}
}
#ifndef CC_INTERP
// Test ImethodDataPtr. If it is null, continue at the specified label
void InterpreterMacroAssembler::test_method_data_pointer(Register mdp, Label& zero_continue) {
assert(ProfileInterpreter, "must be profiling interpreter");
movptr(mdp, Address(rbp, frame::interpreter_frame_mdx_offset * wordSize));
testptr(mdp, mdp);
jcc(Assembler::zero, zero_continue);
}
// Set the method data pointer for the current bcp.
void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() {
assert(ProfileInterpreter, "must be profiling interpreter");
Label set_mdp;
push(rax);
push(rbx);
get_method(rbx);
// Test MDO to avoid the call if it is NULL.
movptr(rax, Address(rbx, in_bytes(Method::method_data_offset())));
testptr(rax, rax);
jcc(Assembler::zero, set_mdp);
// rbx,: method
// rsi: bcp
call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rbx, rsi);
// rax,: mdi
// mdo is guaranteed to be non-zero here, we checked for it before the call.
movptr(rbx, Address(rbx, in_bytes(Method::method_data_offset())));
addptr(rbx, in_bytes(MethodData::data_offset()));
addptr(rax, rbx);
bind(set_mdp);
movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), rax);
pop(rbx);
pop(rax);
}
void InterpreterMacroAssembler::verify_method_data_pointer() {
assert(ProfileInterpreter, "must be profiling interpreter");
#ifdef ASSERT
Label verify_continue;
push(rax);
push(rbx);
push(rcx);
push(rdx);
test_method_data_pointer(rcx, verify_continue); // If mdp is zero, continue
get_method(rbx);
// If the mdp is valid, it will point to a DataLayout header which is
// consistent with the bcp. The converse is highly probable also.
load_unsigned_short(rdx, Address(rcx, in_bytes(DataLayout::bci_offset())));
addptr(rdx, Address(rbx, Method::const_offset()));
lea(rdx, Address(rdx, ConstMethod::codes_offset()));
cmpptr(rdx, rsi);
jcc(Assembler::equal, verify_continue);
// rbx,: method
// rsi: bcp
// rcx: mdp
call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), rbx, rsi, rcx);
bind(verify_continue);
pop(rdx);
pop(rcx);
pop(rbx);
pop(rax);
#endif // ASSERT
}
void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in, int constant, Register value) {
// %%% this seems to be used to store counter data which is surely 32bits
// however 64bit side stores 64 bits which seems wrong
assert(ProfileInterpreter, "must be profiling interpreter");
Address data(mdp_in, constant);
movptr(data, value);
}
void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
int constant,
bool decrement) {
// Counter address
Address data(mdp_in, constant);
increment_mdp_data_at(data, decrement);
}
void InterpreterMacroAssembler::increment_mdp_data_at(Address data,
bool decrement) {
assert( DataLayout::counter_increment==1, "flow-free idiom only works with 1" );
assert(ProfileInterpreter, "must be profiling interpreter");
// %%% 64bit treats this as 64 bit which seems unlikely
if (decrement) {
// Decrement the register. Set condition codes.
addl(data, -DataLayout::counter_increment);
// If the decrement causes the counter to overflow, stay negative
Label L;
jcc(Assembler::negative, L);
addl(data, DataLayout::counter_increment);
bind(L);
} else {
assert(DataLayout::counter_increment == 1,
"flow-free idiom only works with 1");
// Increment the register. Set carry flag.
addl(data, DataLayout::counter_increment);
// If the increment causes the counter to overflow, pull back by 1.
sbbl(data, 0);
}
}
void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
Register reg,
int constant,
bool decrement) {
Address data(mdp_in, reg, Address::times_1, constant);
increment_mdp_data_at(data, decrement);
}
void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in, int flag_byte_constant) {
assert(ProfileInterpreter, "must be profiling interpreter");
int header_offset = in_bytes(DataLayout::header_offset());
int header_bits = DataLayout::flag_mask_to_header_mask(flag_byte_constant);
// Set the flag
orl(Address(mdp_in, header_offset), header_bits);
}
void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in,
int offset,
Register value,
Register test_value_out,
Label& not_equal_continue) {
assert(ProfileInterpreter, "must be profiling interpreter");
if (test_value_out == noreg) {
cmpptr(value, Address(mdp_in, offset));
} else {
// Put the test value into a register, so caller can use it:
movptr(test_value_out, Address(mdp_in, offset));
cmpptr(test_value_out, value);
}
jcc(Assembler::notEqual, not_equal_continue);
}
void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, int offset_of_disp) {
assert(ProfileInterpreter, "must be profiling interpreter");
Address disp_address(mdp_in, offset_of_disp);
addptr(mdp_in,disp_address);
movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
}
void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, Register reg, int offset_of_disp) {
assert(ProfileInterpreter, "must be profiling interpreter");
Address disp_address(mdp_in, reg, Address::times_1, offset_of_disp);
addptr(mdp_in, disp_address);
movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
}
void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in, int constant) {
assert(ProfileInterpreter, "must be profiling interpreter");
addptr(mdp_in, constant);
movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
}
void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) {
assert(ProfileInterpreter, "must be profiling interpreter");
push(return_bci); // save/restore across call_VM
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), return_bci);
pop(return_bci);
}
void InterpreterMacroAssembler::profile_taken_branch(Register mdp, Register bumped_count) {
if (ProfileInterpreter) {
Label profile_continue;
// If no method data exists, go to profile_continue.
// Otherwise, assign to mdp
test_method_data_pointer(mdp, profile_continue);
// We are taking a branch. Increment the taken count.
// We inline increment_mdp_data_at to return bumped_count in a register
//increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset()));
Address data(mdp, in_bytes(JumpData::taken_offset()));
// %%% 64bit treats these cells as 64 bit but they seem to be 32 bit
movl(bumped_count,data);
assert( DataLayout::counter_increment==1, "flow-free idiom only works with 1" );
addl(bumped_count, DataLayout::counter_increment);
sbbl(bumped_count, 0);
movl(data,bumped_count); // Store back out
// The method data pointer needs to be updated to reflect the new target.
update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset()));
bind (profile_continue);
}
}
void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) {
if (ProfileInterpreter) {
Label profile_continue;
// If no method data exists, go to profile_continue.
test_method_data_pointer(mdp, profile_continue);
// We are taking a branch. Increment the not taken count.
increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset()));
// The method data pointer needs to be updated to correspond to the next bytecode
update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size()));
bind (profile_continue);
}
}
void InterpreterMacroAssembler::profile_call(Register mdp) {
if (ProfileInterpreter) {
Label profile_continue;
// If no method data exists, go to profile_continue.
test_method_data_pointer(mdp, profile_continue);
// We are making a call. Increment the count.
increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
// The method data pointer needs to be updated to reflect the new target.
update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size()));
bind (profile_continue);
}
}
void InterpreterMacroAssembler::profile_final_call(Register mdp) {
if (ProfileInterpreter) {
Label profile_continue;
// If no method data exists, go to profile_continue.
test_method_data_pointer(mdp, profile_continue);
// We are making a call. Increment the count.
increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
// The method data pointer needs to be updated to reflect the new target.
update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size()));
bind (profile_continue);
}
}
void InterpreterMacroAssembler::profile_virtual_call(Register receiver, Register mdp,
Register reg2,
bool receiver_can_be_null) {
if (ProfileInterpreter) {
Label profile_continue;
// If no method data exists, go to profile_continue.
test_method_data_pointer(mdp, profile_continue);
Label skip_receiver_profile;
if (receiver_can_be_null) {
Label not_null;
testptr(receiver, receiver);
jccb(Assembler::notZero, not_null);
// We are making a call. Increment the count for null receiver.
increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
jmp(skip_receiver_profile);
bind(not_null);
}
// Record the receiver type.
record_klass_in_profile(receiver, mdp, reg2, true);
bind(skip_receiver_profile);
// The method data pointer needs to be updated to reflect the new target.
update_mdp_by_constant(mdp,
in_bytes(VirtualCallData::
virtual_call_data_size()));
bind(profile_continue);
}
}
void InterpreterMacroAssembler::record_klass_in_profile_helper(
Register receiver, Register mdp,
Register reg2, int start_row,
Label& done, bool is_virtual_call) {
if (TypeProfileWidth == 0) {
if (is_virtual_call) {
increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
}
return;
}
int last_row = VirtualCallData::row_limit() - 1;
assert(start_row <= last_row, "must be work left to do");
// Test this row for both the receiver and for null.
// Take any of three different outcomes:
// 1. found receiver => increment count and goto done
// 2. found null => keep looking for case 1, maybe allocate this cell
// 3. found something else => keep looking for cases 1 and 2
// Case 3 is handled by a recursive call.
for (int row = start_row; row <= last_row; row++) {
Label next_test;
bool test_for_null_also = (row == start_row);
// See if the receiver is receiver[n].
int recvr_offset = in_bytes(VirtualCallData::receiver_offset(row));
test_mdp_data_at(mdp, recvr_offset, receiver,
(test_for_null_also ? reg2 : noreg),
next_test);
// (Reg2 now contains the receiver from the CallData.)
// The receiver is receiver[n]. Increment count[n].
int count_offset = in_bytes(VirtualCallData::receiver_count_offset(row));
increment_mdp_data_at(mdp, count_offset);
jmp(done);
bind(next_test);
if (row == start_row) {
Label found_null;
// Failed the equality check on receiver[n]... Test for null.
testptr(reg2, reg2);
if (start_row == last_row) {
// The only thing left to do is handle the null case.
if (is_virtual_call) {
jccb(Assembler::zero, found_null);
// Receiver did not match any saved receiver and there is no empty row for it.
// Increment total counter to indicate polymorphic case.
increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
jmp(done);
bind(found_null);
} else {
jcc(Assembler::notZero, done);
}
break;
}
// Since null is rare, make it be the branch-taken case.
jcc(Assembler::zero, found_null);
// Put all the "Case 3" tests here.
record_klass_in_profile_helper(receiver, mdp, reg2, start_row + 1, done, is_virtual_call);
// Found a null. Keep searching for a matching receiver,
// but remember that this is an empty (unused) slot.
bind(found_null);
}
}
// In the fall-through case, we found no matching receiver, but we
// observed the receiver[start_row] is NULL.
// Fill in the receiver field and increment the count.
int recvr_offset = in_bytes(VirtualCallData::receiver_offset(start_row));
set_mdp_data_at(mdp, recvr_offset, receiver);
int count_offset = in_bytes(VirtualCallData::receiver_count_offset(start_row));
movptr(reg2, (intptr_t)DataLayout::counter_increment);
set_mdp_data_at(mdp, count_offset, reg2);
if (start_row > 0) {
jmp(done);
}
}
void InterpreterMacroAssembler::record_klass_in_profile(Register receiver,
Register mdp, Register reg2,
bool is_virtual_call) {
assert(ProfileInterpreter, "must be profiling");
Label done;
record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call);
bind (done);
}
void InterpreterMacroAssembler::profile_ret(Register return_bci, Register mdp) {
if (ProfileInterpreter) {
Label profile_continue;
uint row;
// If no method data exists, go to profile_continue.
test_method_data_pointer(mdp, profile_continue);
// Update the total ret count.
increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
for (row = 0; row < RetData::row_limit(); row++) {
Label next_test;
// See if return_bci is equal to bci[n]:
test_mdp_data_at(mdp, in_bytes(RetData::bci_offset(row)), return_bci,
noreg, next_test);
// return_bci is equal to bci[n]. Increment the count.
increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row)));
// The method data pointer needs to be updated to reflect the new target.
update_mdp_by_offset(mdp, in_bytes(RetData::bci_displacement_offset(row)));
jmp(profile_continue);
bind(next_test);
}
update_mdp_for_ret(return_bci);
bind (profile_continue);
}
}
void InterpreterMacroAssembler::profile_null_seen(Register mdp) {
if (ProfileInterpreter) {
Label profile_continue;
// If no method data exists, go to profile_continue.
test_method_data_pointer(mdp, profile_continue);
set_mdp_flag_at(mdp, BitData::null_seen_byte_constant());
// The method data pointer needs to be updated.
int mdp_delta = in_bytes(BitData::bit_data_size());
if (TypeProfileCasts) {
mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
}
update_mdp_by_constant(mdp, mdp_delta);
bind (profile_continue);
}
}
void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) {
if (ProfileInterpreter && TypeProfileCasts) {
Label profile_continue;
// If no method data exists, go to profile_continue.
test_method_data_pointer(mdp, profile_continue);
int count_offset = in_bytes(CounterData::count_offset());
// Back up the address, since we have already bumped the mdp.
count_offset -= in_bytes(VirtualCallData::virtual_call_data_size());
// *Decrement* the counter. We expect to see zero or small negatives.
increment_mdp_data_at(mdp, count_offset, true);
bind (profile_continue);
}
}
void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2)
{
if (ProfileInterpreter) {
Label profile_continue;
// If no method data exists, go to profile_continue.
test_method_data_pointer(mdp, profile_continue);
// The method data pointer needs to be updated.
int mdp_delta = in_bytes(BitData::bit_data_size());
if (TypeProfileCasts) {
mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
// Record the object type.
record_klass_in_profile(klass, mdp, reg2, false);
assert(reg2 == rdi, "we know how to fix this blown reg");
restore_locals(); // Restore EDI
}
update_mdp_by_constant(mdp, mdp_delta);
bind(profile_continue);
}
}
void InterpreterMacroAssembler::profile_switch_default(Register mdp) {
if (ProfileInterpreter) {
Label profile_continue;
// If no method data exists, go to profile_continue.
test_method_data_pointer(mdp, profile_continue);
// Update the default case count
increment_mdp_data_at(mdp, in_bytes(MultiBranchData::default_count_offset()));
// The method data pointer needs to be updated.
update_mdp_by_offset(mdp, in_bytes(MultiBranchData::default_displacement_offset()));
bind (profile_continue);
}
}
void InterpreterMacroAssembler::profile_switch_case(Register index, Register mdp, Register reg2) {
if (ProfileInterpreter) {
Label profile_continue;
// If no method data exists, go to profile_continue.
test_method_data_pointer(mdp, profile_continue);
// Build the base (index * per_case_size_in_bytes()) + case_array_offset_in_bytes()
movptr(reg2, (intptr_t)in_bytes(MultiBranchData::per_case_size()));
// index is positive and so should have correct value if this code were
// used on 64bits
imulptr(index, reg2);
addptr(index, in_bytes(MultiBranchData::case_array_offset()));
// Update the case count
increment_mdp_data_at(mdp, index, in_bytes(MultiBranchData::relative_count_offset()));
// The method data pointer needs to be updated.
update_mdp_by_offset(mdp, index, in_bytes(MultiBranchData::relative_displacement_offset()));
bind (profile_continue);
}
}
#endif // !CC_INTERP
void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) {
if (state == atos) MacroAssembler::verify_oop(reg);
}
#ifndef CC_INTERP
void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) {
if (state == ftos || state == dtos) MacroAssembler::verify_FPU(stack_depth);
}
#endif /* CC_INTERP */
void InterpreterMacroAssembler::notify_method_entry() {
// Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
// track stack depth. If it is possible to enter interp_only_mode we add
// the code to check if the event should be sent.
if (JvmtiExport::can_post_interpreter_events()) {
Label L;
get_thread(rcx);
movl(rcx, Address(rcx, JavaThread::interp_only_mode_offset()));
testl(rcx,rcx);
jcc(Assembler::zero, L);
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_entry));
bind(L);
}
{
SkipIfEqual skip_if(this, &DTraceMethodProbes, 0);
get_thread(rcx);
get_method(rbx);
call_VM_leaf(
CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), rcx, rbx);
}
// RedefineClasses() tracing support for obsolete method entry
if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) {
get_thread(rcx);
get_method(rbx);
call_VM_leaf(
CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),
rcx, rbx);
}
}
void InterpreterMacroAssembler::notify_method_exit(
TosState state, NotifyMethodExitMode mode) {
// Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
// track stack depth. If it is possible to enter interp_only_mode we add
// the code to check if the event should be sent.
if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) {
Label L;
// Note: frame::interpreter_frame_result has a dependency on how the
// method result is saved across the call to post_method_exit. If this
// is changed then the interpreter_frame_result implementation will
// need to be updated too.
// For c++ interpreter the result is always stored at a known location in the frame
// template interpreter will leave it on the top of the stack.
NOT_CC_INTERP(push(state);)
get_thread(rcx);
movl(rcx, Address(rcx, JavaThread::interp_only_mode_offset()));
testl(rcx,rcx);
jcc(Assembler::zero, L);
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit));
bind(L);
NOT_CC_INTERP(pop(state);)
}
{
SkipIfEqual skip_if(this, &DTraceMethodProbes, 0);
NOT_CC_INTERP(push(state));
get_thread(rbx);
get_method(rcx);
call_VM_leaf(
CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
rbx, rcx);
NOT_CC_INTERP(pop(state));
}
}
// Jump if ((*counter_addr += increment) & mask) satisfies the condition.
void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr,
int increment, int mask,
Register scratch, bool preloaded,
Condition cond, Label* where) {
if (!preloaded) {
movl(scratch, counter_addr);
}
incrementl(scratch, increment);
movl(counter_addr, scratch);
andl(scratch, mask);
jcc(cond, *where);
}