#
# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation. Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
# When you read this source. Remember that $(sort ...) has the side effect
# of removing duplicates. It is actually this side effect that is
# desired whenever sort is used below!
ifeq (,$(_MAKEBASE_GMK))
$(error You must include MakeBase.gmk prior to including NativeCompilation.gmk)
endif
ifeq ($(COMPILER_TYPE),CC)
COMPILING_MSG=echo Compiling $1
LINKING_MSG=echo Linking $1
LINKING_EXE_MSG=echo Linking executable $1
ARCHIVING_MSG=echo Archiving $1
else
COMPILING_MSG=
LINKING_MSG=
LINKING_EXE_MSG=
ARCHIVING_MSG=
endif
define add_native_source
# param 1 = BUILD_MYPACKAGE
# parma 2 = the source file name (..../alfa.c or .../beta.cpp)
# param 3 = the bin dir that stores all .o (.obj) and .d files.
# param 4 = the c flags to the compiler
# param 5 = the c compiler
# param 6 = the c++ flags to the compiler
# param 7 = the c++ compiler
# param 8 = the flags to the assembler
ifneq (,$$(filter %.c,$2))
# Compile as a C file
$1_$2_FLAGS=$4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
$1_$2_COMP=$5
$1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
else ifneq (,$$(filter %.m,$2))
# Compile as a objective-c file
$1_$2_FLAGS=-x objective-c $4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
$1_$2_COMP=$5
$1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
else ifneq (,$$(filter %.s,$2))
# Compile as assembler file
$1_$2_FLAGS=$8 -DTHIS_FILE='"$$(<F)"'
$1_$2_COMP=$(AS)
$1_$2_DEP_FLAG:=
else
# Compile as a C++ file
$1_$2_FLAGS=$6 $$($1_$(notdir $2)_CXXFLAGS) -DTHIS_FILE='"$$(<F)"' -c
$1_$2_COMP=$7
$1_$2_DEP_FLAG:=$(CXX_FLAG_DEPS)
endif
# Generate the .o (.obj) file name and place it in the bin dir.
$1_$2_OBJ:=$3/$$(patsubst %.cpp,%$(OBJ_SUFFIX),$$(patsubst %.c,%$(OBJ_SUFFIX),$$(patsubst %.m,%$(OBJ_SUFFIX),$$(patsubst %.s,%$(OBJ_SUFFIX),$$(notdir $2)))))
# Only continue if this object file hasn't been processed already. This lets the first found
# source file override any other with the same name.
ifeq (,$$(findstring $$($1_$2_OBJ),$$($1_OBJS_SO_FAR)))
$1_OBJS_SO_FAR+=$$($1_$2_OBJ)
ifeq (,$$(filter %.s,$2))
# And this is the dependency file for this obj file.
$1_$2_DEP:=$$(patsubst %$(OBJ_SUFFIX),%.d,$$($1_$2_OBJ))
# Include previously generated dependency information. (if it exists)
-include $$($1_$2_DEP)
ifeq ($(COMPILER_TYPE),CL)
$1_$2_DEBUG_OUT_FLAGS:=-Fd$$(patsubst %$(OBJ_SUFFIX),%.pdb,$$($1_$2_OBJ)) \
-Fm$$(patsubst %$(OBJ_SUFFIX),%.map,$$($1_$2_OBJ))
endif
endif
$$($1_$2_OBJ) : $2
ifeq ($(COMPILER_TYPE),CC)
$$(call COMPILING_MSG,$$(notdir $2))
$$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEP_FLAG) $$($1_$2_DEP) $(CC_OUT_OPTION)$$($1_$2_OBJ) $2
endif
ifeq ($(COMPILER_TYPE),CL)
$$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEBUG_OUT_FLAGS) $(CC_OUT_OPTION)$$($1_$2_OBJ) $2
endif
endif
endef
define SetupNativeCompilation
# param 1 is for example BUILD_MYPACKAGE
# param 2,3,4,5,6,7,8 are named args.
# SRC one or more directory roots to scan for C/C++ files.
# LANG C or C++
# CFLAGS the compiler flags to be used, used both for C and C++.
# CXXFLAGS the compiler flags to be used for c++, if set overrides CFLAGS.
# LDFLAGS the linker flags to be used, used both for C and C++.
# LDFLAGS_SUFFIX the linker flags to be added last on the commandline
# typically the libraries linked to.
# ARFLAGS the archiver flags to be used
# OBJECT_DIR the directory where we store the object files
# LIBRARY the resulting library file
# PROGRAM the resulting exec file
# INCLUDES only pick source from these directories
# EXCLUDES do not pick source from these directories
# INCLUDE_FILES only compile exactly these files!
# EXCLUDE_FILES with these names
# VERSIONINFO_RESOURCE Input file for RC. Setting this implies that RC will be run
# RC_FLAGS flags for RC.
# MAPFILE mapfile
# REORDER reorder file
# DEBUG_SYMBOLS add debug symbols (if configured on)
# CC the compiler to use, default is $(CC)
# LDEXE the linker to use for linking executables, default is $(LDEXE)
# OPTIMIZATION sets optimization level to NONE, LOW, HIGH, HIGHEST
$(if $2,$1_$(strip $2))
$(if $3,$1_$(strip $3))
$(if $4,$1_$(strip $4))
$(if $5,$1_$(strip $5))
$(if $6,$1_$(strip $6))
$(if $7,$1_$(strip $7))
$(if $8,$1_$(strip $8))
$(if $9,$1_$(strip $9))
$(if $(10),$1_$(strip $(10)))
$(if $(11),$1_$(strip $(11)))
$(if $(12),$1_$(strip $(12)))
$(if $(13),$1_$(strip $(13)))
$(if $(14),$1_$(strip $(14)))
$(if $(15),$1_$(strip $(15)))
$(if $(16),$1_$(strip $(16)))
$(if $(17),$1_$(strip $(17)))
$(if $(18),$1_$(strip $(18)))
$(if $(19),$1_$(strip $(19)))
$(if $(20),$1_$(strip $(20)))
$(if $(21),$1_$(strip $(21)))
$(if $(22),$1_$(strip $(22)))
$(if $(23),$1_$(strip $(23)))
$(if $(24),$1_$(strip $(24)))
$(if $(25),$1_$(strip $(25)))
$(if $(26),$(error Internal makefile error: Too many arguments to SetupNativeCompilation, please update NativeCompilation.gmk))
ifneq (,$$($1_BIN))
$$(error BIN has been replaced with OBJECT_DIR)
endif
ifneq (,$$($1_LIB))
$$(error LIB has been replaced with LIBRARY)
endif
ifneq (,$$($1_EXE))
$$(error EXE has been replaced with PROGRAM)
endif
ifneq (,$$($1_LIBRARY))
ifeq (,$$($1_OUTPUT_DIR))
$$(error LIBRARY requires OUTPUT_DIR)
endif
ifneq ($$($1_LIBRARY),$(basename $$($1_LIBRARY)))
$$(error directory of LIBRARY should be specified using OUTPUT_DIR)
endif
ifneq (,$(findstring $(SHARED_LIBRARY_SUFFIX),$$($1_LIBRARY)))
$$(error LIBRARY should be specified without SHARED_LIBRARY_SUFFIX: $(SHARED_LIBRARY_SUFFIX))
endif
ifneq (,$(findstring $(LIBRARY_PREFIX),$$($1_LIBRARY)))
$$(error LIBRARY should be specified without LIBRARY_PREFIX: $(LIBRARY_PREFIX))
endif
$1_BASENAME:=$(LIBRARY_PREFIX)$$($1_LIBRARY)$(SHARED_LIBRARY_SUFFIX)
$1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME)
endif
ifneq (,$$($1_STATIC_LIBRARY))
ifeq (,$$($1_OUTPUT_DIR))
$$(error STATIC_LIBRARY requires OUTPUT_DIR)
endif
ifneq ($$($1_STATIC_LIBRARY),$(basename $$($1_STATIC_LIBRARY)))
$$(error directory of STATIC_LIBRARY should be specified using OUTPUT_DIR)
endif
ifneq (,$(findstring $(STATIC_LIBRARY_SUFFIX),$$($1_STATIC_LIBRARY)))
$$(error STATIC_LIBRARY should be specified without STATIC_LIBRARY_SUFFIX: $(STATIC_LIBRARY_SUFFIX))
endif
ifneq (,$(findstring $(LIBRARY_PREFIX),$$($1_STATIC_LIBRARY)))
$$(error STATIC_LIBRARY should be specified without LIBRARY_PREFIX: $(LIBRARY_PREFIX))
endif
$1_BASENAME:=$(LIBRARY_PREFIX)$$($1_STATIC_LIBRARY)$(STATIC_LIBRARY_SUFFIX)
$1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME)
endif
ifneq (,$$($1_PROGRAM))
ifeq (,$$($1_OUTPUT_DIR))
$$(error PROGRAM requires OUTPUT_DIR)
endif
ifneq ($$($1_PROGRAM),$(basename $$($1_PROGRAM)))
$$(error directory of PROGRAM should be specified using OUTPUT_DIR)
endif
ifneq (,$(findstring $(EXE_SUFFIX),$$($1_PROGRAM)))
$$(error PROGRAM should be specified without EXE_SUFFIX: $(EXE_SUFFIX))
endif
$1_BASENAME:=$$($1_PROGRAM)$(EXE_SUFFIX)
$1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME)
endif
ifeq (,$$($1_TARGET))
$$(error Neither PROGRAM, LIBRARY nor STATIC_LIBRARY has been specified for SetupNativeCompilation)
endif
ifeq (,$$($1_LANG))
$$(error You have to specify LANG for native compilation $1)
endif
ifeq (C,$$($1_LANG))
ifeq ($$($1_LDEXE),)
$1_LDEXE:=$(LDEXE)
endif
$1_LD:=$(LD)
else
ifeq (C++,$$($1_LANG))
$1_LD:=$(LDCXX)
$1_LDEXE:=$(LDEXECXX)
else
$$(error Unknown native language $$($1_LANG) for $1)
endif
endif
ifeq ($$($1_CC),)
$1_CC:=$(CC)
endif
# Make sure the dirs exist.
$$(shell $(MKDIR) -p $$($1_SRC) $$($1_OBJECT_DIR) $$($1_OUTPUT_DIR))
# Find all files in the source trees. Sort to remove duplicates.
$1_ALL_SRCS := $$(sort $$(foreach i,$$($1_SRC), $$(shell $(FIND) $$i -type f)))
# Extract the C/C++ files.
$1_EXCLUDE_FILES:=$$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$($1_EXCLUDE_FILES)))
$1_INCLUDE_FILES:=$$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$($1_INCLUDE_FILES)))
ifneq ($$($1_EXCLUDE_FILES),)
$1_EXCLUDE_FILES:=$$(addprefix %,$$($1_EXCLUDE_FILES))
endif
$1_SRCS := $$(filter-out $$($1_EXCLUDE_FILES),$$(filter %.s %.c %.cpp %.m,$$($1_ALL_SRCS)))
ifneq (,$$(strip $$($1_INCLUDE_FILES)))
$1_SRCS := $$(filter $$($1_INCLUDE_FILES),$$($1_SRCS))
endif
ifeq (,$$($1_SRCS))
$$(error No sources found for $1 when looking inside the dirs $$($1_SRC))
endif
# There can be only a single bin dir root, no need to foreach over the roots.
$1_BINS := $$(wildcard $$($1_OBJECT_DIR)/*$(OBJ_SUFFIX))
# Now we have a list of all c/c++ files to compile: $$($1_SRCS)
# and we have a list of all existing object files: $$($1_BINS)
# Prepend the source/bin path to the filter expressions. Then do the filtering.
ifneq ($$($1_INCLUDES),)
$1_SRC_INCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_INCLUDES))))
$1_SRCS := $$(filter $$($1_SRC_INCLUDES),$$($1_SRCS))
endif
ifneq ($$($1_EXCLUDES),)
$1_SRC_EXCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_EXCLUDES))))
$1_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_SRCS))
endif
# Calculate the expected output from compiling the sources (sort to remove duplicates. Also provides
# a reproducable order on the input files to the linker).
$1_EXPECTED_OBJS:=$$(sort $$(addprefix $$($1_OBJECT_DIR)/,$$(patsubst %.cpp,%$(OBJ_SUFFIX),$$(patsubst %.c,%$(OBJ_SUFFIX),$$(patsubst %.m,%$(OBJ_SUFFIX),$$(patsubst %.s,%$(OBJ_SUFFIX),$$(notdir $$($1_SRCS))))))))
# Are there too many object files on disk? Perhaps because some source file was removed?
$1_SUPERFLOUS_OBJS:=$$(sort $$(filter-out $$($1_EXPECTED_OBJS),$$($1_BINS)))
# Clean out the superfluous object files.
$$(shell $(RM) -f $$($1_SUPERFLUOUS_OBJS))
# Pickup extra OPENJDK_TARGET_OS_API and/or OPENJDK_TARGET_OS dependent variables for CFLAGS.
$1_EXTRA_CFLAGS:=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_API)) $$($1_CFLAGS_$(OPENJDK_TARGET_OS))
ifneq ($(DEBUG_LEVEL),release)
# Pickup extra debug dependent variables for CFLAGS
$1_EXTRA_CFLAGS+=$$($1_CFLAGS_debug)
$1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_API)_debug)
$1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS)_debug)
else
$1_EXTRA_CFLAGS+=$$($1_CFLAGS_release)
$1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_API)_release)
$1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS)_release)
endif
# Pickup extra OPENJDK_TARGET_OS_API and/or OPENJDK_TARGET_OS dependent variables for CXXFLAGS.
$1_EXTRA_CXXFLAGS:=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_API)) $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS))
ifneq ($(DEBUG_LEVEL),release)
# Pickup extra debug dependent variables for CXXFLAGS
$1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_debug)
$1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_API)_debug)
$1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_debug)
else
$1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_release)
$1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_API)_release)
$1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_release)
endif
ifneq (,$$($1_DEBUG_SYMBOLS))
ifeq ($(ENABLE_DEBUG_SYMBOLS), yes)
# Programs don't get the debug symbols added in the old build. It's not clear if
# this is intentional.
ifeq ($$($1_PROGRAM),)
$1_EXTRA_CFLAGS+=$(CFLAGS_DEBUG_SYMBOLS)
$1_EXTRA_CXXFLAGS+=$(CXXFLAGS_DEBUG_SYMBOLS)
endif
endif
endif
ifeq ($$($1_CXXFLAGS),)
$1_CXXFLAGS:=$$($1_CFLAGS)
endif
ifeq ($$(strip $$($1_EXTRA_CXXFLAGS)),)
$1_EXTRA_CXXFLAGS:=$$($1_EXTRA_CFLAGS)
endif
ifneq (,$$($1_REORDER))
$1_EXTRA_CFLAGS += $$(C_FLAG_REORDER)
$1_EXTRA_CXXFLAGS += $$(CXX_FLAG_REORDER)
endif
ifeq (NONE, $$($1_OPTIMIZATION))
$1_EXTRA_CFLAGS += $(C_O_FLAG_NONE)
$1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_NONE)
else ifeq (LOW, $$($1_OPTIMIZATION))
$1_EXTRA_CFLAGS += $(C_O_FLAG_NORM)
$1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_NORM)
else ifeq (HIGH, $$($1_OPTIMIZATION))
$1_EXTRA_CFLAGS += $(C_O_FLAG_HI)
$1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_HI)
else ifeq (HIGHEST, $$($1_OPTIMIZATION))
$1_EXTRA_CFLAGS += $(C_O_FLAG_HIGHEST)
$1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_HIGHEST)
else ifneq (, $$($1_OPTIMIZATION))
$$(error Unknown value for OPTIMIZATION: $$($1_OPTIMIZATION))
endif
# Now create a list of the packages that are about to compile. Used when sending source
# in a batch to the compiler.
$$(shell $(RM) $$($1_OBJECT_DIR)/_the.list_of_sources)
$$(eval $$(call ListPathsSafelyNow,$1_SRCS,\n, >> $$($1_OBJECT_DIR)/_the.list_of_sources))
# Now call add_native_source for each source file we are going to compile.
$$(foreach p,$$($1_SRCS),\
$$(eval $$(call add_native_source,$1,$$p,$$($1_OBJECT_DIR),\
$$($1_CFLAGS) $$($1_EXTRA_CFLAGS),$$($1_CC),\
$$($1_CXXFLAGS) $$($1_EXTRA_CXXFLAGS),$(CXX),$$($1_ASFLAGS))))
# On windows we need to create a resource file
ifeq ($(OPENJDK_TARGET_OS), windows)
ifneq (,$$($1_VERSIONINFO_RESOURCE))
$1_RES:=$$($1_OBJECT_DIR)/$$($1_BASENAME).res
$$($1_RES): $$($1_VERSIONINFO_RESOURCE)
$(RC) $$($1_RC_FLAGS) $(CC_OUT_OPTION)$$@ $$($1_VERSIONINFO_RESOURCE)
endif
ifneq (,$$($1_MANIFEST))
$1_GEN_MANIFEST:=$$($1_OBJECT_DIR)/$$($1_PROGRAM).manifest
IMVERSIONVALUE:=$(JDK_MINOR_VERSION).$(JDK_MICRO_VERSION).$(JDK_UPDATE_VERSION).$(COOKED_BUILD_NUMBER)
$$($1_GEN_MANIFEST): $$($1_MANIFEST)
$(SED) 's%IMVERSION%$$(IMVERSIONVALUE)%g;s%PROGRAM%$$($1_PROGRAM)%g' $$< > $$@
endif
endif
# mapfile doesnt seem to be implemented on macosx (yet??)
ifneq ($(OPENJDK_TARGET_CPU),ppc)
ifneq ($(OPENJDK_TARGET_CPU),arm)
ifneq ($(OPENJDK_TARGET_OS),macosx)
ifneq ($(OPENJDK_TARGET_OS),windows)
$1_REAL_MAPFILE:=$$($1_MAPFILE)
ifneq (,$$($1_REORDER))
$1_REAL_MAPFILE:=$$($1_OBJECT_DIR)/mapfile
$$($1_REAL_MAPFILE) : $$($1_MAPFILE) $$($1_REORDER)
$$(MKDIR) -p $$(@D)
$$(CP) $$($1_MAPFILE) $$@.tmp
$$(SED) -e 's=OUTPUTDIR=$$($1_OBJECT_DIR)=' $$($1_REORDER) >> $$@.tmp
$$(MV) $$@.tmp $$@
endif
endif
endif
endif
endif
# Pickup extra OPENJDK_TARGET_OS_API and/or OPENJDK_TARGET_OS dependent variables
# for LDFLAGS and LDFLAGS_SUFFIX
$1_EXTRA_LDFLAGS:=$$($1_LDFLAGS_$(OPENJDK_TARGET_OS_API)) $$($1_LDFLAGS_$(OPENJDK_TARGET_OS))
$1_EXTRA_LDFLAGS_SUFFIX:=$$($1_LDFLAGS_SUFFIX_$(OPENJDK_TARGET_OS_API)) $$($1_LDFLAGS_SUFFIX_$(OPENJDK_TARGET_OS))
ifneq (,$$($1_REAL_MAPFILE))
$1_EXTRA_LDFLAGS += $(call SET_SHARED_LIBRARY_MAPFILE,$$($1_REAL_MAPFILE))
endif
$1 := $$($1_TARGET)
ifneq (,$$($1_LIBRARY))
# Generating a dynamic library.
$1_EXTRA_LDFLAGS+=$$(call SET_SHARED_LIBRARY_NAME,$$($1_BASENAME))
ifeq ($(OPENJDK_TARGET_OS), windows)
$1_EXTRA_LDFLAGS+="-implib:$$($1_OBJECT_DIR)/$$($1_LIBRARY).lib"
endif
ifneq (,$$($1_DEBUG_SYMBOLS))
ifeq ($(ENABLE_DEBUG_SYMBOLS), yes)
ifeq ($(OPENJDK_TARGET_OS), windows)
$1_EXTRA_LDFLAGS+="-pdb:$$($1_OBJECT_DIR)/$$($1_LIBRARY).pdb" \
"-map:$$($1_OBJECT_DIR)/$$($1_LIBRARY).map"
endif
ifneq ($$($1_OUTPUT_DIR),$$($1_OBJECT_DIR))
$$($1_OUTPUT_DIR)/% : $$($1_OBJECT_DIR)/%
$(CP) $$< $$@
endif
ifeq ($(OPENJDK_TARGET_OS), solaris)
# gobjcopy crashes on "empty" section headers with the SHF_ALLOC flag set.
# Use $(FIX_EMPTY_SEC_HDR_FLAGS) to clear the SHF_ALLOC flag (if set) from
# empty section headers until a fixed $(OBJCOPY) is available.
# An empty section header has sh_addr == 0 and sh_size == 0.
# This problem has only been seen on Solaris X64, but we call this tool
# on all Solaris builds just in case.
#
# $(OBJCOPY) --add-gnu-debuglink=... corrupts SUNW_* sections.
# Use $(ADD_GNU_DEBUGLINK) until a fixed $(OBJCOPY) is available.
$$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo : $$($1_TARGET) \
$(FIX_EMPTY_SEC_HDR_FLAGS) $(ADD_GNU_DEBUGLINK)
$(RM) $$@
$(FIX_EMPTY_SEC_HDR_FLAGS) $$<
$(OBJCOPY) --only-keep-debug $$< $$@
$(CD) $$(@D) && $(ADD_GNU_DEBUGLINK) $$(@F) $$<
else # not solaris
$$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo : $$($1_TARGET)
$(RM) $$@
$(OBJCOPY) --only-keep-debug $$< $$@
$(CD) $$(@D) && $(OBJCOPY) --add-gnu-debuglink=$$(@F) $$<
endif # Touch to not retrigger rule on rebuild
$(TOUCH) $$@
ifeq ($(ZIP_DEBUGINFO_FILES), 1)
$1 += $$($1_OUTPUT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).diz
ifeq ($(OPENJDK_TARGET_OS), windows)
$$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).diz : $$($1_TARGET)
$(CD) $$($1_OBJECT_DIR) \
&& $(ZIP) -q $$@ $$($1_LIBRARY).map $$($1_LIBRARY).pdb
else
$$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).diz : $$($1_TARGET) \
$$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo
$(CD) $$($1_OBJECT_DIR) \
&& $(ZIP) -q $$@ $$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo
endif
else
ifeq ($(OPENJDK_TARGET_OS), windows)
$1 += $$($1_OUTPUT_DIR)/$$($1_LIBRARY).map \
$$($1_OUTPUT_DIR)/$$($1_LIBRARY).pdb
else
$1 += $$($1_OUTPUT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo
endif
endif
endif
endif
$$($1_TARGET) : $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_REAL_MAPFILE)
$$(call LINKING_MSG,$$($1_BASENAME))
$$($1_LD) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $(LD_OUT_OPTION)$$@ \
$$($1_EXPECTED_OBJS) $$($1_RES) $$($1_LDFLAGS_SUFFIX) \
$$($1_EXTRA_LDFLAGS_SUFFIX)
endif
ifneq (,$$($1_STATIC_LIBRARY))
# Generating a static library, ie object file archive.
$$($1_TARGET) : $$($1_EXPECTED_OBJS) $$($1_RES)
$$(call ARCHIVING_MSG,$$($1_LIBRARY))
$(AR) $$($1_AR_FLAGS) $(AR_OUT_OPTION)$$($1_TARGET) $$($1_EXPECTED_OBJS) \
$$($1_RES) $$($1_LDFLAGS_SUFFIX) $$($1_EXTRA_LDFLAGS_SUFFIX)
endif
ifneq (,$$($1_PROGRAM))
# A executable binary has been specified, setup the target for it.
ifneq (,$$($1_DEBUG_SYMBOLS))
ifeq ($(ENABLE_DEBUG_SYMBOLS), yes)
ifeq ($(OPENJDK_TARGET_OS), windows)
$1_EXTRA_LDFLAGS+="-pdb:$$($1_OBJECT_DIR)/$$($1_PROGRAM).pdb" \
"-map:$$($1_OBJECT_DIR)/$$($1_PROGRAM).map"
endif
ifneq ($$($1_OUTPUT_DIR),$$($1_OBJECT_DIR))
$$($1_OUTPUT_DIR)/% : $$($1_OBJECT_DIR)/%
$(CP) $$< $$@
endif
ifeq ($(OPENJDK_TARGET_OS), solaris)
# gobjcopy crashes on "empty" section headers with the SHF_ALLOC flag set.
# Use $(FIX_EMPTY_SEC_HDR_FLAGS) to clear the SHF_ALLOC flag (if set) from
# empty section headers until a fixed $(OBJCOPY) is available.
# An empty section header has sh_addr == 0 and sh_size == 0.
# This problem has only been seen on Solaris X64, but we call this tool
# on all Solaris builds just in case.
#
# $(OBJCOPY) --add-gnu-debuglink=... corrupts SUNW_* sections.
# Use $(ADD_GNU_DEBUGLINK) until a fixed $(OBJCOPY) is available.
$$($1_OBJECT_DIR)/$$($1_PROGRAM).debuginfo : $$($1_TARGET) \
$(FIX_EMPTY_SEC_HDR_FLAGS) $(ADD_GNU_DEBUGLINK)
$(RM) $$@
$(FIX_EMPTY_SEC_HDR_FLAGS) $$<
$(OBJCOPY) --only-keep-debug $$< $$@
$(CD) $$(@D) && $(ADD_GNU_DEBUGLINK) $$(@F) $$<
else # not solaris
$$($1_OBJECT_DIR)/$$($1_PROGRAM).debuginfo : $$($1_TARGET)
$(RM) $$@
$(OBJCOPY) --only-keep-debug $$< $$@
$(CD) $$(@D) && $(OBJCOPY) --add-gnu-debuglink=$$(@F) $$<
endif
$(TOUCH) $$@
ifeq ($(ZIP_DEBUGINFO_FILES), 1)
$1 += $$($1_OUTPUT_DIR)/$$($1_PROGRAM).diz
ifeq ($(OPENJDK_TARGET_OS), windows)
$$($1_OBJECT_DIR)/$$($1_PROGRAM).diz : $$($1_TARGET)
$(CD) $$($1_OBJECT_DIR) \
&& $(ZIP) -q $$@ $$($1_PROGRAM).map $$($1_PROGRAM).pdb
else
$$($1_OBJECT_DIR)/$$(PROGRAM_PREFIX)$$($1_PROGRAM).diz : $$($1_TARGET) \
$$($1_OBJECT_DIR)/$$($1_PROGRAM).debuginfo
$(CD) $$($1_OBJECT_DIR) \
&& $(ZIP) -q $$@ $$($1_PROGRAM).debuginfo
endif
else
ifeq ($(OPENJDK_TARGET_OS), windows)
$1 += $$($1_OUTPUT_DIR)/$$($1_PROGRAM).map \
$$($1_OUTPUT_DIR)/$$($1_PROGRAM).pdb
else
$1 += $$($1_OUTPUT_DIR)/$$($1_PROGRAM).debuginfo
endif
endif
endif
endif
$$($1_TARGET) : $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_GEN_MANIFEST)
$$(call LINKING_EXE_MSG,$$($1_BASENAME))
$$($1_LDEXE) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $(EXE_OUT_OPTION)$$($1_TARGET) \
$$($1_EXPECTED_OBJS) $$($1_RES) $$($1_LDFLAGS_SUFFIX) \
$$($1_EXTRA_LDFLAGS_SUFFIX)
ifneq (,$$($1_GEN_MANIFEST))
$(MT) -nologo /manifest $$($1_GEN_MANIFEST) /outputresource:$$@;#1
endif
endif
endef