/*
 * Copyright (c) 2007, 2017, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */

package sun.java2d.marlin;

final class Curve {

    float ax, ay, bx, by, cx, cy, dx, dy;
    float dax, day, dbx, dby;

    Curve() {
    }

    void set(float[] points, int type) {
        switch(type) {
        case 8:
            set(points[0], points[1],
                points[2], points[3],
                points[4], points[5],
                points[6], points[7]);
            return;
        case 6:
            set(points[0], points[1],
                points[2], points[3],
                points[4], points[5]);
            return;
        default:
            throw new InternalError("Curves can only be cubic or quadratic");
        }
    }

    void set(float x1, float y1,
             float x2, float y2,
             float x3, float y3,
             float x4, float y4)
    {
        ax = 3.0f * (x2 - x3) + x4 - x1;
        ay = 3.0f * (y2 - y3) + y4 - y1;
        bx = 3.0f * (x1 - 2.0f * x2 + x3);
        by = 3.0f * (y1 - 2.0f * y2 + y3);
        cx = 3.0f * (x2 - x1);
        cy = 3.0f * (y2 - y1);
        dx = x1;
        dy = y1;
        dax = 3.0f * ax; day = 3.0f * ay;
        dbx = 2.0f * bx; dby = 2.0f * by;
    }

    void set(float x1, float y1,
             float x2, float y2,
             float x3, float y3)
    {
        ax = 0.0f; ay = 0.0f;
        bx = x1 - 2.0f * x2 + x3;
        by = y1 - 2.0f * y2 + y3;
        cx = 2.0f * (x2 - x1);
        cy = 2.0f * (y2 - y1);
        dx = x1;
        dy = y1;
        dax = 0.0f; day = 0.0f;
        dbx = 2.0f * bx; dby = 2.0f * by;
    }

    float xat(float t) {
        return t * (t * (t * ax + bx) + cx) + dx;
    }
    float yat(float t) {
        return t * (t * (t * ay + by) + cy) + dy;
    }

    float dxat(float t) {
        return t * (t * dax + dbx) + cx;
    }

    float dyat(float t) {
        return t * (t * day + dby) + cy;
    }

    int dxRoots(float[] roots, int off) {
        return Helpers.quadraticRoots(dax, dbx, cx, roots, off);
    }

    int dyRoots(float[] roots, int off) {
        return Helpers.quadraticRoots(day, dby, cy, roots, off);
    }

    int infPoints(float[] pts, int off) {
        // inflection point at t if -f'(t)x*f''(t)y + f'(t)y*f''(t)x == 0
        // Fortunately, this turns out to be quadratic, so there are at
        // most 2 inflection points.
        final float a = dax * dby - dbx * day;
        final float b = 2.0f * (cy * dax - day * cx);
        final float c = cy * dbx - cx * dby;

        return Helpers.quadraticRoots(a, b, c, pts, off);
    }

    // finds points where the first and second derivative are
    // perpendicular. This happens when g(t) = f'(t)*f''(t) == 0 (where
    // * is a dot product). Unfortunately, we have to solve a cubic.
    private int perpendiculardfddf(float[] pts, int off) {
        assert pts.length >= off + 4;

        // these are the coefficients of some multiple of g(t) (not g(t),
        // because the roots of a polynomial are not changed after multiplication
        // by a constant, and this way we save a few multiplications).
        final float a = 2.0f * (dax*dax + day*day);
        final float b = 3.0f * (dax*dbx + day*dby);
        final float c = 2.0f * (dax*cx + day*cy) + dbx*dbx + dby*dby;
        final float d = dbx*cx + dby*cy;
        return Helpers.cubicRootsInAB(a, b, c, d, pts, off, 0.0f, 1.0f);
    }

    // Tries to find the roots of the function ROC(t)-w in [0, 1). It uses
    // a variant of the false position algorithm to find the roots. False
    // position requires that 2 initial values x0,x1 be given, and that the
    // function must have opposite signs at those values. To find such
    // values, we need the local extrema of the ROC function, for which we
    // need the roots of its derivative; however, it's harder to find the
    // roots of the derivative in this case than it is to find the roots
    // of the original function. So, we find all points where this curve's
    // first and second derivative are perpendicular, and we pretend these
    // are our local extrema. There are at most 3 of these, so we will check
    // at most 4 sub-intervals of (0,1). ROC has asymptotes at inflection
    // points, so roc-w can have at least 6 roots. This shouldn't be a
    // problem for what we're trying to do (draw a nice looking curve).
    int rootsOfROCMinusW(float[] roots, int off, final float w, final float err) {
        // no OOB exception, because by now off<=6, and roots.length >= 10
        assert off <= 6 && roots.length >= 10;
        int ret = off;
        int numPerpdfddf = perpendiculardfddf(roots, off);
        float t0 = 0.0f, ft0 = ROCsq(t0) - w*w;
        roots[off + numPerpdfddf] = 1.0f; // always check interval end points
        numPerpdfddf++;
        for (int i = off; i < off + numPerpdfddf; i++) {
            float t1 = roots[i], ft1 = ROCsq(t1) - w*w;
            if (ft0 == 0.0f) {
                roots[ret++] = t0;
            } else if (ft1 * ft0 < 0.0f) { // have opposite signs
                // (ROC(t)^2 == w^2) == (ROC(t) == w) is true because
                // ROC(t) >= 0 for all t.
                roots[ret++] = falsePositionROCsqMinusX(t0, t1, w*w, err);
            }
            t0 = t1;
            ft0 = ft1;
        }

        return ret - off;
    }

    private static float eliminateInf(float x) {
        return (x == Float.POSITIVE_INFINITY ? Float.MAX_VALUE :
            (x == Float.NEGATIVE_INFINITY ? Float.MIN_VALUE : x));
    }

    // A slight modification of the false position algorithm on wikipedia.
    // This only works for the ROCsq-x functions. It might be nice to have
    // the function as an argument, but that would be awkward in java6.
    // TODO: It is something to consider for java8 (or whenever lambda
    // expressions make it into the language), depending on how closures
    // and turn out. Same goes for the newton's method
    // algorithm in Helpers.java
    private float falsePositionROCsqMinusX(float x0, float x1,
                                           final float x, final float err)
    {
        final int iterLimit = 100;
        int side = 0;
        float t = x1, ft = eliminateInf(ROCsq(t) - x);
        float s = x0, fs = eliminateInf(ROCsq(s) - x);
        float r = s, fr;
        for (int i = 0; i < iterLimit && Math.abs(t - s) > err * Math.abs(t + s); i++) {
            r = (fs * t - ft * s) / (fs - ft);
            fr = ROCsq(r) - x;
            if (sameSign(fr, ft)) {
                ft = fr; t = r;
                if (side < 0) {
                    fs /= (1 << (-side));
                    side--;
                } else {
                    side = -1;
                }
            } else if (fr * fs > 0) {
                fs = fr; s = r;
                if (side > 0) {
                    ft /= (1 << side);
                    side++;
                } else {
                    side = 1;
                }
            } else {
                break;
            }
        }
        return r;
    }

    private static boolean sameSign(float x, float y) {
        // another way is to test if x*y > 0. This is bad for small x, y.
        return (x < 0.0f && y < 0.0f) || (x > 0.0f && y > 0.0f);
    }

    // returns the radius of curvature squared at t of this curve
    // see http://en.wikipedia.org/wiki/Radius_of_curvature_(applications)
    private float ROCsq(final float t) {
        // dx=xat(t) and dy=yat(t). These calls have been inlined for efficiency
        final float dx = t * (t * dax + dbx) + cx;
        final float dy = t * (t * day + dby) + cy;
        final float ddx = 2.0f * dax * t + dbx;
        final float ddy = 2.0f * day * t + dby;
        final float dx2dy2 = dx*dx + dy*dy;
        final float ddx2ddy2 = ddx*ddx + ddy*ddy;
        final float ddxdxddydy = ddx*dx + ddy*dy;
        return dx2dy2*((dx2dy2*dx2dy2) / (dx2dy2 * ddx2ddy2 - ddxdxddydy*ddxdxddydy));
    }
}