--- a/common/makefiles/devkit/Tools.gmk Thu Nov 07 08:16:05 2013 -0800
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,473 +0,0 @@
-#
-# Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-##########################################################################################
-#
-# Workhorse makefile for creating ONE cross compiler
-# Needs either to be from BUILD -> BUILD OR have
-# BUILD -> HOST prebuilt
-#
-# NOTE: There is a bug here. We don't limit the
-# PATH when building BUILD -> BUILD, which means that
-# if you configure after you've once build the BUILD->BUILD
-# compiler THAT one will be picked up as the compiler for itself.
-# This is not so great, especially if you did a partial delete
-# of the target tree.
-#
-# Fix this...
-#
-
-$(info TARGET=$(TARGET))
-$(info HOST=$(HOST))
-$(info BUILD=$(BUILD))
-
-ARCH := $(word 1,$(subst -, ,$(TARGET)))
-
-##########################################################################################
-# Define external dependencies
-
-# Latest that could be made to work.
-gcc_ver := gcc-4.7.3
-binutils_ver := binutils-2.22
-ccache_ver := ccache-3.1.9
-mpfr_ver := mpfr-3.0.1
-gmp_ver := gmp-4.3.2
-mpc_ver := mpc-1.0.1
-
-GCC := http://ftp.gnu.org/pub/gnu/gcc/$(gcc_ver)/$(gcc_ver).tar.bz2
-BINUTILS := http://ftp.gnu.org/pub/gnu/binutils/$(binutils_ver).tar.bz2
-CCACHE := http://samba.org/ftp/ccache/$(ccache_ver).tar.gz
-MPFR := http://www.mpfr.org/${mpfr_ver}/${mpfr_ver}.tar.bz2
-GMP := http://ftp.gnu.org/pub/gnu/gmp/${gmp_ver}.tar.bz2
-MPC := http://www.multiprecision.org/mpc/download/${mpc_ver}.tar.gz
-
-# RPMs in OEL5.5
-RPM_LIST := \
- kernel-headers \
- glibc-2 glibc-headers glibc-devel \
- cups-libs cups-devel \
- libX11 libX11-devel \
- xorg-x11-proto-devel \
- alsa-lib alsa-lib-devel \
- libXext libXext-devel \
- libXtst libXtst-devel \
- libXrender libXrender-devel \
- freetype freetype-devel \
- libXt libXt-devel \
- libSM libSM-devel \
- libICE libICE-devel \
- libXi libXi-devel \
- libXdmcp libXdmcp-devel \
- libXau libXau-devel \
- libgcc
-
-
-ifeq ($(ARCH),x86_64)
- RPM_DIR ?= $(RPM_DIR_x86_64)
- RPM_ARCHS := x86_64
- ifeq ($(BUILD),$(HOST))
- ifeq ($(TARGET),$(HOST))
- # When building the native compiler for x86_64, enable mixed mode.
- RPM_ARCHS += i386 i686
- endif
- endif
-else
- RPM_DIR ?= $(RPM_DIR_i686)
- RPM_ARCHS := i386 i686
-endif
-
-# Sort to remove duplicates
-RPM_FILE_LIST := $(sort $(foreach a,$(RPM_ARCHS),$(wildcard $(patsubst %,$(RPM_DIR)/%*$a.rpm,$(RPM_LIST)))))
-
-ifeq ($(RPM_FILE_LIST),)
- $(error Found no RPMs, RPM_DIR must point to list of directories to search for RPMs)
-endif
-
-##########################################################################################
-# Define common directories and files
-
-# Ensure we have 32-bit libs also for x64. We enable mixed-mode.
-ifeq (x86_64,$(ARCH))
- LIBDIRS := lib64 lib
- CFLAGS_lib := -m32
-else
- LIBDIRS := lib
-endif
-
-# Define directories
-RESULT := $(OUTPUT_ROOT)/result
-BUILDDIR := $(OUTPUT_ROOT)/$(HOST)/$(TARGET)
-PREFIX := $(RESULT)/$(HOST)
-TARGETDIR := $(PREFIX)/$(TARGET)
-SYSROOT := $(TARGETDIR)/sys-root
-DOWNLOAD := $(OUTPUT_ROOT)/download
-SRCDIR := $(OUTPUT_ROOT)/src
-
-# Marker file for unpacking rpms
-rpms := $(SYSROOT)/rpms_unpacked
-
-# Need to patch libs that are linker scripts to use non-absolute paths
-libs := $(SYSROOT)/libs_patched
-
-##########################################################################################
-# Unpack source packages
-
-# Generate downloading + unpacking of sources.
-define Download
- $(1)_DIR = $(abspath $(SRCDIR)/$(basename $(basename $(notdir $($(1))))))
- $(1)_CFG = $$($(1)_DIR)/configure
- $(1)_FILE = $(DOWNLOAD)/$(notdir $($(1)))
-
- $$($(1)_CFG) : $$($(1)_FILE)
- mkdir -p $$(SRCDIR)
- tar -C $$(SRCDIR) -x$$(if $$(findstring .gz, $$<),z,j)f $$<
- $$(foreach p,$$(abspath $$(wildcard $$(notdir $$($(1)_DIR)).patch)), \
- echo PATCHING $$(p) ; \
- patch -d $$($(1)_DIR) -p1 -i $$(p) ; \
- )
- touch $$@
-
- $$($(1)_FILE) :
- wget -P $(DOWNLOAD) $$($(1))
-endef
-
-# Download and unpack all source packages
-$(foreach p,GCC BINUTILS CCACHE MPFR GMP MPC,$(eval $(call Download,$(p))))
-
-##########################################################################################
-# Unpack RPMS
-
-# Note. For building linux you should install rpm2cpio.
-define unrpm
- $(SYSROOT)/$(notdir $(1)).unpacked \
- : $(1)
- $$(rpms) : $(SYSROOT)/$(notdir $(1)).unpacked
-endef
-
-%.unpacked :
- $(info Unpacking target rpms and libraries from $<)
- @(mkdir -p $(@D); \
- cd $(@D); \
- rpm2cpio $< | \
- cpio --extract --make-directories \
- -f \
- "./usr/share/doc/*" \
- "./usr/share/man/*" \
- "./usr/X11R6/man/*" \
- "*/X11/locale/*" \
- || die ; )
- touch $@
-
-$(foreach p,$(RPM_FILE_LIST),$(eval $(call unrpm,$(p))))
-
-##########################################################################################
-
-# Note: MUST create a <sys-root>/usr/lib even if not really needed.
-# gcc will use a path relative to it to resolve lib64. (x86_64).
-# we're creating multi-lib compiler with 32bit libc as well, so we should
-# have it anyway, but just to make sure...
-# Patch libc.so and libpthread.so to force linking against libraries in sysroot
-# and not the ones installed on the build machine.
-$(libs) : $(rpms)
- @echo Patching libc and pthreads
- @(for f in `find $(SYSROOT) -name libc.so -o -name libpthread.so`; do \
- (cat $$f | sed -e 's|/usr/lib64/||g' \
- -e 's|/usr/lib/||g' \
- -e 's|/lib64/||g' \
- -e 's|/lib/||g' ) > $$f.tmp ; \
- mv $$f.tmp $$f ; \
- done)
- @mkdir -p $(SYSROOT)/usr/lib
- @touch $@
-
-##########################################################################################
-
-# Define marker files for each source package to be compiled
-$(foreach t,binutils mpfr gmp mpc gcc ccache,$(eval $(t) = $(TARGETDIR)/$($(t)_ver).done))
-
-##########################################################################################
-
-# Default base config
-CONFIG = --target=$(TARGET) \
- --host=$(HOST) --build=$(BUILD) \
- --prefix=$(PREFIX)
-
-PATHEXT = $(RESULT)/$(BUILD)/bin:
-
-PATHPRE = PATH=$(PATHEXT)$(PATH)
-BUILDPAR = -j16
-
-# Default commands to when making
-MAKECMD =
-INSTALLCMD = install
-
-
-declare_tools = CC$(1)=$(2)gcc LD$(1)=$(2)ld AR$(1)=$(2)ar AS$(1)=$(2)as RANLIB$(1)=$(2)ranlib CXX$(1)=$(2)g++ OBJDUMP$(1)=$(2)objdump
-
-ifeq ($(HOST),$(BUILD))
- ifeq ($(HOST),$(TARGET))
- TOOLS = $(call declare_tools,_FOR_TARGET,)
- endif
-endif
-
-TOOLS ?= $(call declare_tools,_FOR_TARGET,$(TARGET)-)
-
-##########################################################################################
-
-# Create a TARGET bfd + libiberty only.
-# Configure one or two times depending on mulitlib arch.
-# If multilib, the second should be 32-bit, and we resolve
-# CFLAG_<name> to most likely -m32.
-define mk_bfd
- $$(info Libs for $(1))
- $$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile \
- : CFLAGS += $$(CFLAGS_$(1))
- $$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile \
- : LIBDIRS = --libdir=$(TARGETDIR)/$(1)
-
- bfdlib += $$(TARGETDIR)/$$(binutils_ver)-$(subst /,-,$(1)).done
- bfdmakes += $$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile
-endef
-
-# Create one set of bfds etc for each multilib arch
-$(foreach l,$(LIBDIRS),$(eval $(call mk_bfd,$(l))))
-
-# Only build these two libs.
-$(bfdlib) : MAKECMD = all-libiberty all-bfd
-$(bfdlib) : INSTALLCMD = install-libiberty install-bfd
-
-# Building targets libbfd + libiberty. HOST==TARGET, i.e not
-# for a cross env.
-$(bfdmakes) : CONFIG = --target=$(TARGET) \
- --host=$(TARGET) --build=$(BUILD) \
- --prefix=$(TARGETDIR) \
- --with-sysroot=$(SYSROOT) \
- $(LIBDIRS)
-
-$(bfdmakes) : TOOLS = $(call declare_tools,_FOR_TARGET,$(TARGET)-) $(call declare_tools,,$(TARGET)-)
-
-##########################################################################################
-
-$(gcc) \
- $(binutils) \
- $(gmp) \
- $(mpfr) \
- $(mpc) \
- $(bfdmakes) \
- $(ccache) : ENVS += $(TOOLS)
-
-# libdir to work around hateful bfd stuff installing into wrong dirs...
-# ensure we have 64 bit bfd support in the HOST library. I.e our
-# compiler on i686 will know 64 bit symbols, BUT later
-# we build just the libs again for TARGET, then with whatever the arch
-# wants.
-$(BUILDDIR)/$(binutils_ver)/Makefile : CONFIG += --enable-64-bit-bfd --libdir=$(PREFIX)/$(word 1,$(LIBDIRS))
-
-# Makefile creation. Simply run configure in build dir.
-$(bfdmakes) \
-$(BUILDDIR)/$(binutils_ver)/Makefile \
- : $(BINUTILS_CFG)
- $(info Configuring $@. Log in $(@D)/log.config)
- @mkdir -p $(@D)
- ( \
- cd $(@D) ; \
- $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \
- $(BINUTILS_CFG) \
- $(CONFIG) \
- --with-sysroot=$(SYSROOT) \
- --disable-nls \
- --program-prefix=$(TARGET)- \
- --enable-multilib \
- ) > $(@D)/log.config 2>&1
- @echo 'done'
-
-$(BUILDDIR)/$(mpfr_ver)/Makefile \
- : $(MPFR_CFG)
- $(info Configuring $@. Log in $(@D)/log.config)
- @mkdir -p $(@D)
- ( \
- cd $(@D) ; \
- $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \
- $(MPFR_CFG) \
- $(CONFIG) \
- --program-prefix=$(TARGET)- \
- --enable-shared=no \
- --with-gmp=$(PREFIX) \
- ) > $(@D)/log.config 2>&1
- @echo 'done'
-
-$(BUILDDIR)/$(gmp_ver)/Makefile \
- : $(GMP_CFG)
- $(info Configuring $@. Log in $(@D)/log.config)
- @mkdir -p $(@D)
- ( \
- cd $(@D) ; \
- $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \
- $(GMP_CFG) \
- --host=$(HOST) --build=$(BUILD) \
- --prefix=$(PREFIX) \
- --disable-nls \
- --program-prefix=$(TARGET)- \
- --enable-shared=no \
- --with-mpfr=$(PREFIX) \
- ) > $(@D)/log.config 2>&1
- @echo 'done'
-
-$(BUILDDIR)/$(mpc_ver)/Makefile \
- : $(MPC_CFG)
- $(info Configuring $@. Log in $(@D)/log.config)
- @mkdir -p $(@D)
- ( \
- cd $(@D) ; \
- $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \
- $(MPC_CFG) \
- $(CONFIG) \
- --program-prefix=$(TARGET)- \
- --enable-shared=no \
- --with-mpfr=$(PREFIX) \
- --with-gmp=$(PREFIX) \
- ) > $(@D)/log.config 2>&1
- @echo 'done'
-
-# Only valid if glibc target -> linux
-# proper destructor handling for c++
-ifneq (,$(findstring linux,$(TARGET)))
- $(BUILDDIR)/$(gcc_ver)/Makefile : CONFIG += --enable-__cxa_atexit
-endif
-
-# Want:
-# c,c++
-# shared libs
-# multilib (-m32/-m64 on x64)
-# skip native language.
-# and link and assemble with the binutils we created
-# earlier, so --with-gnu*
-$(BUILDDIR)/$(gcc_ver)/Makefile \
- : $(GCC_CFG)
- $(info Configuring $@. Log in $(@D)/log.config)
- mkdir -p $(@D)
- ( \
- cd $(@D) ; \
- $(PATHPRE) $(ENVS) $(GCC_CFG) $(EXTRA_CFLAGS) \
- $(CONFIG) \
- --with-sysroot=$(SYSROOT) \
- --enable-languages=c,c++ \
- --enable-shared \
- --enable-multilib \
- --disable-nls \
- --with-gnu-as \
- --with-gnu-ld \
- --with-mpfr=$(PREFIX) \
- --with-gmp=$(PREFIX) \
- --with-mpc=$(PREFIX) \
- ) > $(@D)/log.config 2>&1
- @echo 'done'
-
-# need binutils for gcc
-$(gcc) : $(binutils)
-
-# as of 4.3 or so need these for doing config
-$(BUILDDIR)/$(gcc_ver)/Makefile : $(gmp) $(mpfr) $(mpc)
-$(mpfr) : $(gmp)
-$(mpc) : $(gmp) $(mpfr)
-
-##########################################################################################
-# very straightforward. just build a ccache. it is only for host.
-$(BUILDDIR)/$(ccache_ver)/Makefile \
- : $(CCACHE_CFG)
- $(info Configuring $@. Log in $(@D)/log.config)
- @mkdir -p $(@D)
- @( \
- cd $(@D) ; \
- $(PATHPRE) $(ENVS) $(CCACHE_CFG) \
- $(CONFIG) \
- ) > $(@D)/log.config 2>&1
- @echo 'done'
-
-gccpatch = $(TARGETDIR)/gcc-patched
-
-##########################################################################################
-# For some reason cpp is not created as a target-compiler
-ifeq ($(HOST),$(TARGET))
- $(gccpatch) : $(gcc) link_libs
- @echo -n 'Creating compiler symlinks...'
- @for f in cpp; do \
- if [ ! -e $(PREFIX)/bin/$(TARGET)-$$f ]; \
- then \
- cd $(PREFIX)/bin && \
- ln -s $$f $(TARGET)-$$f ; \
- fi \
- done
- @touch $@
- @echo 'done'
-
- ##########################################################################################
- # Ugly at best. Seems that when we compile host->host compiler, that are NOT
- # the BUILD compiler, the result will not try searching for libs in package root.
- # "Solve" this by create links from the target libdirs to where they are.
- link_libs:
- @echo -n 'Creating library symlinks...'
- @$(foreach l,$(LIBDIRS), \
- for f in `cd $(PREFIX)/$(l) && ls`; do \
- if [ ! -e $(TARGETDIR)/$(l)/$$f ]; then \
- mkdir -p $(TARGETDIR)/$(l) && \
- cd $(TARGETDIR)/$(l)/ && \
- ln -s $(if $(findstring /,$(l)),../,)../../$(l)/$$f $$f; \
- fi \
- done;)
- @echo 'done'
-else
- $(gccpatch) :
- @echo 'done'
-endif
-
-##########################################################################################
-# Build in two steps.
-# make <default>
-# make install.
-# Use path to our build hosts cross tools
-# Always need to build cross tools for build host self.
-$(TARGETDIR)/%.done : $(BUILDDIR)/%/Makefile
- $(info Building $(basename $@). Log in $(<D)/log.build)
- $(PATHPRE) $(ENVS) $(MAKE) $(BUILDPAR) -f $< -C $(<D) $(MAKECMD) $(MAKECMD.$(notdir $@)) > $(<D)/log.build 2>&1
- @echo -n 'installing...'
- $(PATHPRE) $(MAKE) $(INSTALLPAR) -f $< -C $(<D) $(INSTALLCMD) $(MAKECMD.$(notdir $@)) > $(<D)/log.install 2>&1
- @touch $@
- @echo 'done'
-
-##########################################################################################
-
-bfdlib : $(bfdlib)
-binutils : $(binutils)
-rpms : $(rpms)
-libs : $(libs)
-sysroot : rpms libs
-gcc : sysroot $(gcc) $(gccpatch)
-all : binutils gcc bfdlib
-
-# this is only built for host. so separate.
-ccache : $(ccache)
-
-.PHONY : gcc all binutils bfdlib link_libs rpms libs sysroot