--- a/hotspot/src/cpu/ppc/vm/interp_masm_ppc_64.cpp Wed Mar 12 11:24:26 2014 -0700
+++ b/hotspot/src/cpu/ppc/vm/interp_masm_ppc_64.cpp Mon Mar 10 12:58:02 2014 +0100
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2003, 2013, Oracle and/or its affiliates. All rights reserved.
- * Copyright 2012, 2013 SAP AG. All rights reserved.
+ * Copyright 2012, 2014 SAP AG. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
@@ -29,6 +29,7 @@
#include "asm/macroAssembler.inline.hpp"
#include "interp_masm_ppc_64.hpp"
#include "interpreter/interpreterRuntime.hpp"
+#include "prims/jvmtiThreadState.hpp"
#ifdef PRODUCT
#define BLOCK_COMMENT(str) // nothing
@@ -45,6 +46,691 @@
MacroAssembler::null_check_throw(a, offset, temp_reg, exception_entry);
}
+void InterpreterMacroAssembler::branch_to_entry(address entry, Register Rscratch) {
+ assert(entry, "Entry must have been generated by now");
+ if (is_within_range_of_b(entry, pc())) {
+ b(entry);
+ } else {
+ load_const_optimized(Rscratch, entry, R0);
+ mtctr(Rscratch);
+ bctr();
+ }
+}
+
+#ifndef CC_INTERP
+
+void InterpreterMacroAssembler::dispatch_next(TosState state, int bcp_incr) {
+ Register bytecode = R12_scratch2;
+ if (bcp_incr != 0) {
+ lbzu(bytecode, bcp_incr, R14_bcp);
+ } else {
+ lbz(bytecode, 0, R14_bcp);
+ }
+
+ dispatch_Lbyte_code(state, bytecode, Interpreter::dispatch_table(state));
+}
+
+void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) {
+ // Load current bytecode.
+ Register bytecode = R12_scratch2;
+ lbz(bytecode, 0, R14_bcp);
+ dispatch_Lbyte_code(state, bytecode, table);
+}
+
+// Dispatch code executed in the prolog of a bytecode which does not do it's
+// own dispatch. The dispatch address is computed and placed in R24_dispatch_addr.
+void InterpreterMacroAssembler::dispatch_prolog(TosState state, int bcp_incr) {
+ Register bytecode = R12_scratch2;
+ lbz(bytecode, bcp_incr, R14_bcp);
+
+ load_dispatch_table(R24_dispatch_addr, Interpreter::dispatch_table(state));
+
+ sldi(bytecode, bytecode, LogBytesPerWord);
+ ldx(R24_dispatch_addr, R24_dispatch_addr, bytecode);
+}
+
+// Dispatch code executed in the epilog of a bytecode which does not do it's
+// own dispatch. The dispatch address in R24_dispatch_addr is used for the
+// dispatch.
+void InterpreterMacroAssembler::dispatch_epilog(TosState state, int bcp_incr) {
+ mtctr(R24_dispatch_addr);
+ addi(R14_bcp, R14_bcp, bcp_incr);
+ bctr();
+}
+
+void InterpreterMacroAssembler::check_and_handle_popframe(Register scratch_reg) {
+ assert(scratch_reg != R0, "can't use R0 as scratch_reg here");
+ if (JvmtiExport::can_pop_frame()) {
+ Label L;
+
+ // Check the "pending popframe condition" flag in the current thread.
+ lwz(scratch_reg, in_bytes(JavaThread::popframe_condition_offset()), R16_thread);
+
+ // Initiate popframe handling only if it is not already being
+ // processed. If the flag has the popframe_processing bit set, it
+ // means that this code is called *during* popframe handling - we
+ // don't want to reenter.
+ andi_(R0, scratch_reg, JavaThread::popframe_pending_bit);
+ beq(CCR0, L);
+
+ andi_(R0, scratch_reg, JavaThread::popframe_processing_bit);
+ bne(CCR0, L);
+
+ // Call the Interpreter::remove_activation_preserving_args_entry()
+ // func to get the address of the same-named entrypoint in the
+ // generated interpreter code.
+ call_c(CAST_FROM_FN_PTR(FunctionDescriptor*,
+ Interpreter::remove_activation_preserving_args_entry),
+ relocInfo::none);
+
+ // Jump to Interpreter::_remove_activation_preserving_args_entry.
+ mtctr(R3_RET);
+ bctr();
+
+ align(32, 12);
+ bind(L);
+ }
+}
+
+void InterpreterMacroAssembler::check_and_handle_earlyret(Register scratch_reg) {
+ const Register Rthr_state_addr = scratch_reg;
+ if (JvmtiExport::can_force_early_return()) {
+ Label Lno_early_ret;
+ ld(Rthr_state_addr, in_bytes(JavaThread::jvmti_thread_state_offset()), R16_thread);
+ cmpdi(CCR0, Rthr_state_addr, 0);
+ beq(CCR0, Lno_early_ret);
+
+ lwz(R0, in_bytes(JvmtiThreadState::earlyret_state_offset()), Rthr_state_addr);
+ cmpwi(CCR0, R0, JvmtiThreadState::earlyret_pending);
+ bne(CCR0, Lno_early_ret);
+
+ // Jump to Interpreter::_earlyret_entry.
+ lwz(R3_ARG1, in_bytes(JvmtiThreadState::earlyret_tos_offset()), Rthr_state_addr);
+ call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry));
+ mtlr(R3_RET);
+ blr();
+
+ align(32, 12);
+ bind(Lno_early_ret);
+ }
+}
+
+void InterpreterMacroAssembler::load_earlyret_value(TosState state, Register Rscratch1) {
+ const Register RjvmtiState = Rscratch1;
+ const Register Rscratch2 = R0;
+
+ ld(RjvmtiState, in_bytes(JavaThread::jvmti_thread_state_offset()), R16_thread);
+ li(Rscratch2, 0);
+
+ switch (state) {
+ case atos: ld(R17_tos, in_bytes(JvmtiThreadState::earlyret_oop_offset()), RjvmtiState);
+ std(Rscratch2, in_bytes(JvmtiThreadState::earlyret_oop_offset()), RjvmtiState);
+ break;
+ case ltos: ld(R17_tos, in_bytes(JvmtiThreadState::earlyret_value_offset()), RjvmtiState);
+ break;
+ case btos: // fall through
+ case ctos: // fall through
+ case stos: // fall through
+ case itos: lwz(R17_tos, in_bytes(JvmtiThreadState::earlyret_value_offset()), RjvmtiState);
+ break;
+ case ftos: lfs(F15_ftos, in_bytes(JvmtiThreadState::earlyret_value_offset()), RjvmtiState);
+ break;
+ case dtos: lfd(F15_ftos, in_bytes(JvmtiThreadState::earlyret_value_offset()), RjvmtiState);
+ break;
+ case vtos: break;
+ default : ShouldNotReachHere();
+ }
+
+ // Clean up tos value in the jvmti thread state.
+ std(Rscratch2, in_bytes(JvmtiThreadState::earlyret_value_offset()), RjvmtiState);
+ // Set tos state field to illegal value.
+ li(Rscratch2, ilgl);
+ stw(Rscratch2, in_bytes(JvmtiThreadState::earlyret_tos_offset()), RjvmtiState);
+}
+
+// Common code to dispatch and dispatch_only.
+// Dispatch value in Lbyte_code and increment Lbcp.
+
+void InterpreterMacroAssembler::load_dispatch_table(Register dst, address* table) {
+ address table_base = (address)Interpreter::dispatch_table((TosState)0);
+ intptr_t table_offs = (intptr_t)table - (intptr_t)table_base;
+ if (is_simm16(table_offs)) {
+ addi(dst, R25_templateTableBase, (int)table_offs);
+ } else {
+ load_const_optimized(dst, table, R0);
+ }
+}
+
+void InterpreterMacroAssembler::dispatch_Lbyte_code(TosState state, Register bytecode, address* table, bool verify) {
+ if (verify) {
+ unimplemented("dispatch_Lbyte_code: verify"); // See Sparc Implementation to implement this
+ }
+
+#ifdef FAST_DISPATCH
+ unimplemented("dispatch_Lbyte_code FAST_DISPATCH");
+#else
+ assert_different_registers(bytecode, R11_scratch1);
+
+ // Calc dispatch table address.
+ load_dispatch_table(R11_scratch1, table);
+
+ sldi(R12_scratch2, bytecode, LogBytesPerWord);
+ ldx(R11_scratch1, R11_scratch1, R12_scratch2);
+
+ // Jump off!
+ mtctr(R11_scratch1);
+ bctr();
+#endif
+}
+
+void InterpreterMacroAssembler::load_receiver(Register Rparam_count, Register Rrecv_dst) {
+ sldi(Rrecv_dst, Rparam_count, Interpreter::logStackElementSize);
+ ldx(Rrecv_dst, Rrecv_dst, R15_esp);
+}
+
+// helpers for expression stack
+
+void InterpreterMacroAssembler::pop_i(Register r) {
+ lwzu(r, Interpreter::stackElementSize, R15_esp);
+}
+
+void InterpreterMacroAssembler::pop_ptr(Register r) {
+ ldu(r, Interpreter::stackElementSize, R15_esp);
+}
+
+void InterpreterMacroAssembler::pop_l(Register r) {
+ ld(r, Interpreter::stackElementSize, R15_esp);
+ addi(R15_esp, R15_esp, 2 * Interpreter::stackElementSize);
+}
+
+void InterpreterMacroAssembler::pop_f(FloatRegister f) {
+ lfsu(f, Interpreter::stackElementSize, R15_esp);
+}
+
+void InterpreterMacroAssembler::pop_d(FloatRegister f) {
+ lfd(f, Interpreter::stackElementSize, R15_esp);
+ addi(R15_esp, R15_esp, 2 * Interpreter::stackElementSize);
+}
+
+void InterpreterMacroAssembler::push_i(Register r) {
+ stw(r, 0, R15_esp);
+ addi(R15_esp, R15_esp, - Interpreter::stackElementSize );
+}
+
+void InterpreterMacroAssembler::push_ptr(Register r) {
+ std(r, 0, R15_esp);
+ addi(R15_esp, R15_esp, - Interpreter::stackElementSize );
+}
+
+void InterpreterMacroAssembler::push_l(Register r) {
+ std(r, - Interpreter::stackElementSize, R15_esp);
+ addi(R15_esp, R15_esp, - 2 * Interpreter::stackElementSize );
+}
+
+void InterpreterMacroAssembler::push_f(FloatRegister f) {
+ stfs(f, 0, R15_esp);
+ addi(R15_esp, R15_esp, - Interpreter::stackElementSize );
+}
+
+void InterpreterMacroAssembler::push_d(FloatRegister f) {
+ stfd(f, - Interpreter::stackElementSize, R15_esp);
+ addi(R15_esp, R15_esp, - 2 * Interpreter::stackElementSize );
+}
+
+void InterpreterMacroAssembler::push_2ptrs(Register first, Register second) {
+ std(first, 0, R15_esp);
+ std(second, -Interpreter::stackElementSize, R15_esp);
+ addi(R15_esp, R15_esp, - 2 * Interpreter::stackElementSize );
+}
+
+void InterpreterMacroAssembler::push_l_pop_d(Register l, FloatRegister d) {
+ std(l, 0, R15_esp);
+ lfd(d, 0, R15_esp);
+}
+
+void InterpreterMacroAssembler::push_d_pop_l(FloatRegister d, Register l) {
+ stfd(d, 0, R15_esp);
+ ld(l, 0, R15_esp);
+}
+
+void InterpreterMacroAssembler::push(TosState state) {
+ switch (state) {
+ case atos: push_ptr(); break;
+ case btos:
+ case ctos:
+ case stos:
+ case itos: push_i(); break;
+ case ltos: push_l(); break;
+ case ftos: push_f(); break;
+ case dtos: push_d(); break;
+ case vtos: /* nothing to do */ break;
+ default : ShouldNotReachHere();
+ }
+}
+
+void InterpreterMacroAssembler::pop(TosState state) {
+ switch (state) {
+ case atos: pop_ptr(); break;
+ case btos:
+ case ctos:
+ case stos:
+ case itos: pop_i(); break;
+ case ltos: pop_l(); break;
+ case ftos: pop_f(); break;
+ case dtos: pop_d(); break;
+ case vtos: /* nothing to do */ break;
+ default : ShouldNotReachHere();
+ }
+ verify_oop(R17_tos, state);
+}
+
+void InterpreterMacroAssembler::empty_expression_stack() {
+ addi(R15_esp, R26_monitor, - Interpreter::stackElementSize);
+}
+
+void InterpreterMacroAssembler::get_2_byte_integer_at_bcp(int bcp_offset,
+ Register Rdst,
+ signedOrNot is_signed) {
+ // Read Java big endian format.
+ if (is_signed == Signed) {
+ lha(Rdst, bcp_offset, R14_bcp);
+ } else {
+ lhz(Rdst, bcp_offset, R14_bcp);
+ }
+#if 0
+ assert(Rtmp != Rdst, "need separate temp register");
+ Register Rfirst = Rtmp;
+ lbz(Rfirst, bcp_offset, R14_bcp); // first byte
+ lbz(Rdst, bcp_offset+1, R14_bcp); // second byte
+
+ // Rdst = ((Rfirst<<8) & 0xFF00) | (Rdst &~ 0xFF00)
+ rldimi(/*RA=*/Rdst, /*RS=*/Rfirst, /*sh=*/8, /*mb=*/48);
+ if (is_signed == Signed) {
+ extsh(Rdst, Rdst);
+ }
+#endif
+}
+
+void InterpreterMacroAssembler::get_4_byte_integer_at_bcp(int bcp_offset,
+ Register Rdst,
+ signedOrNot is_signed) {
+ // Read Java big endian format.
+ if (bcp_offset & 3) { // Offset unaligned?
+ load_const_optimized(Rdst, bcp_offset);
+ if (is_signed == Signed) {
+ lwax(Rdst, R14_bcp, Rdst);
+ } else {
+ lwzx(Rdst, R14_bcp, Rdst);
+ }
+ } else {
+ if (is_signed == Signed) {
+ lwa(Rdst, bcp_offset, R14_bcp);
+ } else {
+ lwz(Rdst, bcp_offset, R14_bcp);
+ }
+ }
+}
+
+// Load the constant pool cache index from the bytecode stream.
+//
+// Kills / writes:
+// - Rdst, Rscratch
+void InterpreterMacroAssembler::get_cache_index_at_bcp(Register Rdst, int bcp_offset, size_t index_size) {
+ assert(bcp_offset > 0, "bcp is still pointing to start of bytecode");
+ if (index_size == sizeof(u2)) {
+ get_2_byte_integer_at_bcp(bcp_offset, Rdst, Unsigned);
+ } else if (index_size == sizeof(u4)) {
+ assert(EnableInvokeDynamic, "giant index used only for JSR 292");
+ get_4_byte_integer_at_bcp(bcp_offset, Rdst, Signed);
+ assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line");
+ nand(Rdst, Rdst, Rdst); // convert to plain index
+ } else if (index_size == sizeof(u1)) {
+ lbz(Rdst, bcp_offset, R14_bcp);
+ } else {
+ ShouldNotReachHere();
+ }
+ // Rdst now contains cp cache index.
+}
+
+void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, int bcp_offset, size_t index_size) {
+ get_cache_index_at_bcp(cache, bcp_offset, index_size);
+ sldi(cache, cache, exact_log2(in_words(ConstantPoolCacheEntry::size()) * BytesPerWord));
+ add(cache, R27_constPoolCache, cache);
+}
+
+// Load object from cpool->resolved_references(index).
+void InterpreterMacroAssembler::load_resolved_reference_at_index(Register result, Register index) {
+ assert_different_registers(result, index);
+ get_constant_pool(result);
+
+ // Convert from field index to resolved_references() index and from
+ // word index to byte offset. Since this is a java object, it can be compressed.
+ Register tmp = index; // reuse
+ sldi(tmp, index, LogBytesPerHeapOop);
+ // Load pointer for resolved_references[] objArray.
+ ld(result, ConstantPool::resolved_references_offset_in_bytes(), result);
+ // JNIHandles::resolve(result)
+ ld(result, 0, result);
+#ifdef ASSERT
+ Label index_ok;
+ lwa(R0, arrayOopDesc::length_offset_in_bytes(), result);
+ sldi(R0, R0, LogBytesPerHeapOop);
+ cmpd(CCR0, tmp, R0);
+ blt(CCR0, index_ok);
+ stop("resolved reference index out of bounds", 0x09256);
+ bind(index_ok);
+#endif
+ // Add in the index.
+ add(result, tmp, result);
+ load_heap_oop(result, arrayOopDesc::base_offset_in_bytes(T_OBJECT), result);
+}
+
+// Generate a subtype check: branch to ok_is_subtype if sub_klass is
+// a subtype of super_klass. Blows registers Rsub_klass, tmp1, tmp2.
+void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass, Register Rsuper_klass, Register Rtmp1,
+ Register Rtmp2, Register Rtmp3, Label &ok_is_subtype) {
+ // Profile the not-null value's klass.
+ profile_typecheck(Rsub_klass, Rtmp1, Rtmp2);
+ check_klass_subtype(Rsub_klass, Rsuper_klass, Rtmp1, Rtmp2, ok_is_subtype);
+ profile_typecheck_failed(Rtmp1, Rtmp2);
+}
+
+void InterpreterMacroAssembler::generate_stack_overflow_check_with_compare_and_throw(Register Rmem_frame_size, Register Rscratch1) {
+ Label done;
+ sub(Rmem_frame_size, R1_SP, Rmem_frame_size);
+ ld(Rscratch1, thread_(stack_overflow_limit));
+ cmpld(CCR0/*is_stack_overflow*/, Rmem_frame_size, Rscratch1);
+ bgt(CCR0/*is_stack_overflow*/, done);
+
+ // Load target address of the runtime stub.
+ assert(StubRoutines::throw_StackOverflowError_entry() != NULL, "generated in wrong order");
+ load_const_optimized(Rscratch1, (StubRoutines::throw_StackOverflowError_entry()), R0);
+ mtctr(Rscratch1);
+ // Restore caller_sp.
+#ifdef ASSERT
+ ld(Rscratch1, 0, R1_SP);
+ ld(R0, 0, R21_sender_SP);
+ cmpd(CCR0, R0, Rscratch1);
+ asm_assert_eq("backlink", 0x547);
+#endif // ASSERT
+ mr(R1_SP, R21_sender_SP);
+ bctr();
+
+ align(32, 12);
+ bind(done);
+}
+
+// Separate these two to allow for delay slot in middle.
+// These are used to do a test and full jump to exception-throwing code.
+
+// Check that index is in range for array, then shift index by index_shift,
+// and put arrayOop + shifted_index into res.
+// Note: res is still shy of address by array offset into object.
+
+void InterpreterMacroAssembler::index_check_without_pop(Register Rarray, Register Rindex, int index_shift, Register Rtmp, Register Rres) {
+ // Check that index is in range for array, then shift index by index_shift,
+ // and put arrayOop + shifted_index into res.
+ // Note: res is still shy of address by array offset into object.
+ // Kills:
+ // - Rindex
+ // Writes:
+ // - Rres: Address that corresponds to the array index if check was successful.
+ verify_oop(Rarray);
+ const Register Rlength = R0;
+ const Register RsxtIndex = Rtmp;
+ Label LisNull, LnotOOR;
+
+ // Array nullcheck
+ if (!ImplicitNullChecks) {
+ cmpdi(CCR0, Rarray, 0);
+ beq(CCR0, LisNull);
+ } else {
+ null_check_throw(Rarray, arrayOopDesc::length_offset_in_bytes(), /*temp*/RsxtIndex);
+ }
+
+ // Rindex might contain garbage in upper bits (remember that we don't sign extend
+ // during integer arithmetic operations). So kill them and put value into same register
+ // where ArrayIndexOutOfBounds would expect the index in.
+ rldicl(RsxtIndex, Rindex, 0, 32); // zero extend 32 bit -> 64 bit
+
+ // Index check
+ lwz(Rlength, arrayOopDesc::length_offset_in_bytes(), Rarray);
+ cmplw(CCR0, Rindex, Rlength);
+ sldi(RsxtIndex, RsxtIndex, index_shift);
+ blt(CCR0, LnotOOR);
+ load_dispatch_table(Rtmp, (address*)Interpreter::_throw_ArrayIndexOutOfBoundsException_entry);
+ mtctr(Rtmp);
+ bctr();
+
+ if (!ImplicitNullChecks) {
+ bind(LisNull);
+ load_dispatch_table(Rtmp, (address*)Interpreter::_throw_NullPointerException_entry);
+ mtctr(Rtmp);
+ bctr();
+ }
+
+ align(32, 16);
+ bind(LnotOOR);
+
+ // Calc address
+ add(Rres, RsxtIndex, Rarray);
+}
+
+void InterpreterMacroAssembler::index_check(Register array, Register index, int index_shift, Register tmp, Register res) {
+ // pop array
+ pop_ptr(array);
+
+ // check array
+ index_check_without_pop(array, index, index_shift, tmp, res);
+}
+
+void InterpreterMacroAssembler::get_const(Register Rdst) {
+ ld(Rdst, in_bytes(Method::const_offset()), R19_method);
+}
+
+void InterpreterMacroAssembler::get_constant_pool(Register Rdst) {
+ get_const(Rdst);
+ ld(Rdst, in_bytes(ConstMethod::constants_offset()), Rdst);
+}
+
+void InterpreterMacroAssembler::get_constant_pool_cache(Register Rdst) {
+ get_constant_pool(Rdst);
+ ld(Rdst, ConstantPool::cache_offset_in_bytes(), Rdst);
+}
+
+void InterpreterMacroAssembler::get_cpool_and_tags(Register Rcpool, Register Rtags) {
+ get_constant_pool(Rcpool);
+ ld(Rtags, ConstantPool::tags_offset_in_bytes(), Rcpool);
+}
+
+// Unlock if synchronized method.
+//
+// Unlock the receiver if this is a synchronized method.
+// Unlock any Java monitors from synchronized blocks.
+//
+// If there are locked Java monitors
+// If throw_monitor_exception
+// throws IllegalMonitorStateException
+// Else if install_monitor_exception
+// installs IllegalMonitorStateException
+// Else
+// no error processing
+void InterpreterMacroAssembler::unlock_if_synchronized_method(TosState state,
+ bool throw_monitor_exception,
+ bool install_monitor_exception) {
+ Label Lunlocked, Lno_unlock;
+ {
+ Register Rdo_not_unlock_flag = R11_scratch1;
+ Register Raccess_flags = R12_scratch2;
+
+ // Check if synchronized method or unlocking prevented by
+ // JavaThread::do_not_unlock_if_synchronized flag.
+ lbz(Rdo_not_unlock_flag, in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()), R16_thread);
+ lwz(Raccess_flags, in_bytes(Method::access_flags_offset()), R19_method);
+ li(R0, 0);
+ stb(R0, in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()), R16_thread); // reset flag
+
+ push(state);
+
+ // Skip if we don't have to unlock.
+ rldicl_(R0, Raccess_flags, 64-JVM_ACC_SYNCHRONIZED_BIT, 63); // Extract bit and compare to 0.
+ beq(CCR0, Lunlocked);
+
+ cmpwi(CCR0, Rdo_not_unlock_flag, 0);
+ bne(CCR0, Lno_unlock);
+ }
+
+ // Unlock
+ {
+ Register Rmonitor_base = R11_scratch1;
+
+ Label Lunlock;
+ // If it's still locked, everything is ok, unlock it.
+ ld(Rmonitor_base, 0, R1_SP);
+ addi(Rmonitor_base, Rmonitor_base, - (frame::ijava_state_size + frame::interpreter_frame_monitor_size_in_bytes())); // Monitor base
+
+ ld(R0, BasicObjectLock::obj_offset_in_bytes(), Rmonitor_base);
+ cmpdi(CCR0, R0, 0);
+ bne(CCR0, Lunlock);
+
+ // If it's already unlocked, throw exception.
+ if (throw_monitor_exception) {
+ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception));
+ should_not_reach_here();
+ } else {
+ if (install_monitor_exception) {
+ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception));
+ b(Lunlocked);
+ }
+ }
+
+ bind(Lunlock);
+ unlock_object(Rmonitor_base);
+ }
+
+ // Check that all other monitors are unlocked. Throw IllegelMonitorState exception if not.
+ bind(Lunlocked);
+ {
+ Label Lexception, Lrestart;
+ Register Rcurrent_obj_addr = R11_scratch1;
+ const int delta = frame::interpreter_frame_monitor_size_in_bytes();
+ assert((delta & LongAlignmentMask) == 0, "sizeof BasicObjectLock must be even number of doublewords");
+
+ bind(Lrestart);
+ // Set up search loop: Calc num of iterations.
+ {
+ Register Riterations = R12_scratch2;
+ Register Rmonitor_base = Rcurrent_obj_addr;
+ ld(Rmonitor_base, 0, R1_SP);
+ addi(Rmonitor_base, Rmonitor_base, - frame::ijava_state_size); // Monitor base
+
+ subf_(Riterations, R26_monitor, Rmonitor_base);
+ ble(CCR0, Lno_unlock);
+
+ addi(Rcurrent_obj_addr, Rmonitor_base, BasicObjectLock::obj_offset_in_bytes() - frame::interpreter_frame_monitor_size_in_bytes());
+ // Check if any monitor is on stack, bail out if not
+ srdi(Riterations, Riterations, exact_log2(delta));
+ mtctr(Riterations);
+ }
+
+ // The search loop: Look for locked monitors.
+ {
+ const Register Rcurrent_obj = R0;
+ Label Lloop;
+
+ ld(Rcurrent_obj, 0, Rcurrent_obj_addr);
+ addi(Rcurrent_obj_addr, Rcurrent_obj_addr, -delta);
+ bind(Lloop);
+
+ // Check if current entry is used.
+ cmpdi(CCR0, Rcurrent_obj, 0);
+ bne(CCR0, Lexception);
+ // Preload next iteration's compare value.
+ ld(Rcurrent_obj, 0, Rcurrent_obj_addr);
+ addi(Rcurrent_obj_addr, Rcurrent_obj_addr, -delta);
+ bdnz(Lloop);
+ }
+ // Fell through: Everything's unlocked => finish.
+ b(Lno_unlock);
+
+ // An object is still locked => need to throw exception.
+ bind(Lexception);
+ if (throw_monitor_exception) {
+ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception));
+ should_not_reach_here();
+ } else {
+ // Stack unrolling. Unlock object and if requested, install illegal_monitor_exception.
+ // Unlock does not block, so don't have to worry about the frame.
+ Register Rmonitor_addr = R11_scratch1;
+ addi(Rmonitor_addr, Rcurrent_obj_addr, -BasicObjectLock::obj_offset_in_bytes() + delta);
+ unlock_object(Rmonitor_addr);
+ if (install_monitor_exception) {
+ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception));
+ }
+ b(Lrestart);
+ }
+ }
+
+ align(32, 12);
+ bind(Lno_unlock);
+ pop(state);
+}
+
+// Support function for remove_activation & Co.
+void InterpreterMacroAssembler::merge_frames(Register Rsender_sp, Register return_pc, Register Rscratch1, Register Rscratch2) {
+ // Pop interpreter frame.
+ ld(Rscratch1, 0, R1_SP); // *SP
+ ld(Rsender_sp, _ijava_state_neg(sender_sp), Rscratch1); // top_frame_sp
+ ld(Rscratch2, 0, Rscratch1); // **SP
+#ifdef ASSERT
+ {
+ Label Lok;
+ ld(R0, _ijava_state_neg(ijava_reserved), Rscratch1);
+ cmpdi(CCR0, R0, 0x5afe);
+ beq(CCR0, Lok);
+ stop("frame corrupted (remove activation)", 0x5afe);
+ bind(Lok);
+ }
+#endif
+ if (return_pc!=noreg) {
+ ld(return_pc, _abi(lr), Rscratch1); // LR
+ }
+
+ // Merge top frames.
+ subf(Rscratch1, R1_SP, Rsender_sp); // top_frame_sp - SP
+ stdux(Rscratch2, R1_SP, Rscratch1); // atomically set *(SP = top_frame_sp) = **SP
+}
+
+// Remove activation.
+//
+// Unlock the receiver if this is a synchronized method.
+// Unlock any Java monitors from synchronized blocks.
+// Remove the activation from the stack.
+//
+// If there are locked Java monitors
+// If throw_monitor_exception
+// throws IllegalMonitorStateException
+// Else if install_monitor_exception
+// installs IllegalMonitorStateException
+// Else
+// no error processing
+void InterpreterMacroAssembler::remove_activation(TosState state,
+ bool throw_monitor_exception,
+ bool install_monitor_exception) {
+ unlock_if_synchronized_method(state, throw_monitor_exception, install_monitor_exception);
+
+ // Save result (push state before jvmti call and pop it afterwards) and notify jvmti.
+ notify_method_exit(false, state, NotifyJVMTI, true);
+
+ verify_oop(R17_tos, state);
+ verify_thread();
+
+ merge_frames(/*top_frame_sp*/ R21_sender_SP, /*return_pc*/ R0, R11_scratch1, R12_scratch2);
+ mtlr(R0);
+}
+
+#endif // !CC_INTERP
+
// Lock object
//
// Registers alive
@@ -81,7 +767,6 @@
assert_different_registers(displaced_header, object_mark_addr, current_header, tmp);
-
// markOop displaced_header = obj->mark().set_unlocked();
// Load markOop from object into displaced_header.
@@ -94,7 +779,6 @@
// Set displaced_header to be (markOop of object | UNLOCK_VALUE).
ori(displaced_header, displaced_header, markOopDesc::unlocked_value);
-
// monitor->lock()->set_displaced_header(displaced_header);
// Initialize the box (Must happen before we update the object mark!).
@@ -147,7 +831,6 @@
BasicLock::displaced_header_offset_in_bytes(), monitor);
b(done);
-
// } else {
// // Slow path.
// InterpreterRuntime::monitorenter(THREAD, monitor);
@@ -158,7 +841,7 @@
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter),
monitor, /*check_for_exceptions=*/true CC_INTERP_ONLY(&& false));
// }
-
+ align(32, 12);
bind(done);
}
}
@@ -173,13 +856,13 @@
void InterpreterMacroAssembler::unlock_object(Register monitor, bool check_for_exceptions) {
if (UseHeavyMonitors) {
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit),
- monitor, /*check_for_exceptions=*/false);
+ monitor, check_for_exceptions CC_INTERP_ONLY(&& false));
} else {
// template code:
//
// if ((displaced_header = monitor->displaced_header()) == NULL) {
- // // Recursive unlock. Mark the monitor unlocked by setting the object field to NULL.
+ // // Recursive unlock. Mark the monitor unlocked by setting the object field to NULL.
// monitor->set_obj(NULL);
// } else if (Atomic::cmpxchg_ptr(displaced_header, obj->mark_addr(), monitor) == monitor) {
// // We swapped the unlocked mark in displaced_header into the object's mark word.
@@ -221,7 +904,7 @@
// If we still have a lightweight lock, unlock the object and be done.
// The object address from the monitor is in object.
- if (!UseBiasedLocking) ld(object, BasicObjectLock::obj_offset_in_bytes(), monitor);
+ if (!UseBiasedLocking) { ld(object, BasicObjectLock::obj_offset_in_bytes(), monitor); }
addi(object_mark_addr, object, oopDesc::mark_offset_in_bytes());
// We have the displaced header in displaced_header. If the lock is still
@@ -261,6 +944,959 @@
}
}
+#ifndef CC_INTERP
+
+// Load compiled (i2c) or interpreter entry when calling from interpreted and
+// do the call. Centralized so that all interpreter calls will do the same actions.
+// If jvmti single stepping is on for a thread we must not call compiled code.
+//
+// Input:
+// - Rtarget_method: method to call
+// - Rret_addr: return address
+// - 2 scratch regs
+//
+void InterpreterMacroAssembler::call_from_interpreter(Register Rtarget_method, Register Rret_addr, Register Rscratch1, Register Rscratch2) {
+ assert_different_registers(Rscratch1, Rscratch2, Rtarget_method, Rret_addr);
+ // Assume we want to go compiled if available.
+ const Register Rtarget_addr = Rscratch1;
+ const Register Rinterp_only = Rscratch2;
+
+ ld(Rtarget_addr, in_bytes(Method::from_interpreted_offset()), Rtarget_method);
+
+ if (JvmtiExport::can_post_interpreter_events()) {
+ lwz(Rinterp_only, in_bytes(JavaThread::interp_only_mode_offset()), R16_thread);
+
+ // JVMTI events, such as single-stepping, are implemented partly by avoiding running
+ // compiled code in threads for which the event is enabled. Check here for
+ // interp_only_mode if these events CAN be enabled.
+ Label done;
+ verify_thread();
+ cmpwi(CCR0, Rinterp_only, 0);
+ beq(CCR0, done);
+ ld(Rtarget_addr, in_bytes(Method::interpreter_entry_offset()), Rtarget_method);
+ align(32, 12);
+ bind(done);
+ }
+
+#ifdef ASSERT
+ {
+ Label Lok;
+ cmpdi(CCR0, Rtarget_addr, 0);
+ bne(CCR0, Lok);
+ stop("null entry point");
+ bind(Lok);
+ }
+#endif // ASSERT
+
+ mr(R21_sender_SP, R1_SP);
+
+ // Calc a precise SP for the call. The SP value we calculated in
+ // generate_fixed_frame() is based on the max_stack() value, so we would waste stack space
+ // if esp is not max. Also, the i2c adapter extends the stack space without restoring
+ // our pre-calced value, so repeating calls via i2c would result in stack overflow.
+ // Since esp already points to an empty slot, we just have to sub 1 additional slot
+ // to meet the abi scratch requirements.
+ // The max_stack pointer will get restored by means of the GR_Lmax_stack local in
+ // the return entry of the interpreter.
+ addi(Rscratch2, R15_esp, Interpreter::stackElementSize - frame::abi_reg_args_size);
+ clrrdi(Rscratch2, Rscratch2, exact_log2(frame::alignment_in_bytes)); // round towards smaller address
+ resize_frame_absolute(Rscratch2, Rscratch2, R0);
+
+ mr_if_needed(R19_method, Rtarget_method);
+ mtctr(Rtarget_addr);
+ mtlr(Rret_addr);
+
+ save_interpreter_state(Rscratch2);
+#ifdef ASSERT
+ ld(Rscratch1, _ijava_state_neg(top_frame_sp), Rscratch2); // Rscratch2 contains fp
+ cmpd(CCR0, R21_sender_SP, Rscratch1);
+ asm_assert_eq("top_frame_sp incorrect", 0x951);
+#endif
+
+ bctr();
+}
+
+// Set the method data pointer for the current bcp.
+void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() {
+ assert(ProfileInterpreter, "must be profiling interpreter");
+ Label get_continue;
+ ld(R28_mdx, in_bytes(Method::method_data_offset()), R19_method);
+ test_method_data_pointer(get_continue);
+ call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), R19_method, R14_bcp);
+
+ addi(R28_mdx, R28_mdx, in_bytes(MethodData::data_offset()));
+ add(R28_mdx, R28_mdx, R3_RET);
+ bind(get_continue);
+}
+
+// Test ImethodDataPtr. If it is null, continue at the specified label.
+void InterpreterMacroAssembler::test_method_data_pointer(Label& zero_continue) {
+ assert(ProfileInterpreter, "must be profiling interpreter");
+ cmpdi(CCR0, R28_mdx, 0);
+ beq(CCR0, zero_continue);
+}
+
+void InterpreterMacroAssembler::verify_method_data_pointer() {
+ assert(ProfileInterpreter, "must be profiling interpreter");
+#ifdef ASSERT
+ Label verify_continue;
+ test_method_data_pointer(verify_continue);
+
+ // If the mdp is valid, it will point to a DataLayout header which is
+ // consistent with the bcp. The converse is highly probable also.
+ lhz(R11_scratch1, in_bytes(DataLayout::bci_offset()), R28_mdx);
+ ld(R12_scratch2, in_bytes(Method::const_offset()), R19_method);
+ addi(R11_scratch1, R11_scratch1, in_bytes(ConstMethod::codes_offset()));
+ add(R11_scratch1, R12_scratch2, R12_scratch2);
+ cmpd(CCR0, R11_scratch1, R14_bcp);
+ beq(CCR0, verify_continue);
+
+ call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp ), R19_method, R14_bcp, R28_mdx);
+
+ bind(verify_continue);
+#endif
+}
+
+void InterpreterMacroAssembler::test_invocation_counter_for_mdp(Register invocation_count,
+ Register Rscratch,
+ Label &profile_continue) {
+ assert(ProfileInterpreter, "must be profiling interpreter");
+ // Control will flow to "profile_continue" if the counter is less than the
+ // limit or if we call profile_method().
+ Label done;
+
+ // If no method data exists, and the counter is high enough, make one.
+ int ipl_offs = load_const_optimized(Rscratch, &InvocationCounter::InterpreterProfileLimit, R0, true);
+ lwz(Rscratch, ipl_offs, Rscratch);
+
+ cmpdi(CCR0, R28_mdx, 0);
+ // Test to see if we should create a method data oop.
+ cmpd(CCR1, Rscratch /* InterpreterProfileLimit */, invocation_count);
+ bne(CCR0, done);
+ bge(CCR1, profile_continue);
+
+ // Build it now.
+ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method));
+ set_method_data_pointer_for_bcp();
+ b(profile_continue);
+
+ align(32, 12);
+ bind(done);
+}
+
+void InterpreterMacroAssembler::test_backedge_count_for_osr(Register backedge_count, Register branch_bcp, Register Rtmp) {
+ assert_different_registers(backedge_count, Rtmp, branch_bcp);
+ assert(UseOnStackReplacement,"Must UseOnStackReplacement to test_backedge_count_for_osr");
+
+ Label did_not_overflow;
+ Label overflow_with_error;
+
+ int ibbl_offs = load_const_optimized(Rtmp, &InvocationCounter::InterpreterBackwardBranchLimit, R0, true);
+ lwz(Rtmp, ibbl_offs, Rtmp);
+ cmpw(CCR0, backedge_count, Rtmp);
+
+ blt(CCR0, did_not_overflow);
+
+ // When ProfileInterpreter is on, the backedge_count comes from the
+ // methodDataOop, which value does not get reset on the call to
+ // frequency_counter_overflow(). To avoid excessive calls to the overflow
+ // routine while the method is being compiled, add a second test to make sure
+ // the overflow function is called only once every overflow_frequency.
+ if (ProfileInterpreter) {
+ const int overflow_frequency = 1024;
+ li(Rtmp, overflow_frequency-1);
+ andr(Rtmp, Rtmp, backedge_count);
+ cmpwi(CCR0, Rtmp, 0);
+ bne(CCR0, did_not_overflow);
+ }
+
+ // Overflow in loop, pass branch bytecode.
+ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::frequency_counter_overflow), branch_bcp, true);
+
+ // Was an OSR adapter generated?
+ // O0 = osr nmethod
+ cmpdi(CCR0, R3_RET, 0);
+ beq(CCR0, overflow_with_error);
+
+ // Has the nmethod been invalidated already?
+ lwz(Rtmp, nmethod::entry_bci_offset(), R3_RET);
+ cmpwi(CCR0, Rtmp, InvalidOSREntryBci);
+ beq(CCR0, overflow_with_error);
+
+ // Migrate the interpreter frame off of the stack.
+ // We can use all registers because we will not return to interpreter from this point.
+
+ // Save nmethod.
+ const Register osr_nmethod = R31;
+ mr(osr_nmethod, R3_RET);
+ set_top_ijava_frame_at_SP_as_last_Java_frame(R1_SP, R11_scratch1);
+ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::OSR_migration_begin), R16_thread);
+ reset_last_Java_frame();
+ // OSR buffer is in ARG1
+
+ // Remove the interpreter frame.
+ merge_frames(/*top_frame_sp*/ R21_sender_SP, /*return_pc*/ R0, R11_scratch1, R12_scratch2);
+
+ // Jump to the osr code.
+ ld(R11_scratch1, nmethod::osr_entry_point_offset(), osr_nmethod);
+ mtlr(R0);
+ mtctr(R11_scratch1);
+ bctr();
+
+ align(32, 12);
+ bind(overflow_with_error);
+ bind(did_not_overflow);
+}
+
+// Store a value at some constant offset from the method data pointer.
+void InterpreterMacroAssembler::set_mdp_data_at(int constant, Register value) {
+ assert(ProfileInterpreter, "must be profiling interpreter");
+
+ std(value, constant, R28_mdx);
+}
+
+// Increment the value at some constant offset from the method data pointer.
+void InterpreterMacroAssembler::increment_mdp_data_at(int constant,
+ Register counter_addr,
+ Register Rbumped_count,
+ bool decrement) {
+ // Locate the counter at a fixed offset from the mdp:
+ addi(counter_addr, R28_mdx, constant);
+ increment_mdp_data_at(counter_addr, Rbumped_count, decrement);
+}
+
+// Increment the value at some non-fixed (reg + constant) offset from
+// the method data pointer.
+void InterpreterMacroAssembler::increment_mdp_data_at(Register reg,
+ int constant,
+ Register scratch,
+ Register Rbumped_count,
+ bool decrement) {
+ // Add the constant to reg to get the offset.
+ add(scratch, R28_mdx, reg);
+ // Then calculate the counter address.
+ addi(scratch, scratch, constant);
+ increment_mdp_data_at(scratch, Rbumped_count, decrement);
+}
+
+void InterpreterMacroAssembler::increment_mdp_data_at(Register counter_addr,
+ Register Rbumped_count,
+ bool decrement) {
+ assert(ProfileInterpreter, "must be profiling interpreter");
+
+ // Load the counter.
+ ld(Rbumped_count, 0, counter_addr);
+
+ if (decrement) {
+ // Decrement the register. Set condition codes.
+ addi(Rbumped_count, Rbumped_count, - DataLayout::counter_increment);
+ // Store the decremented counter, if it is still negative.
+ std(Rbumped_count, 0, counter_addr);
+ // Note: add/sub overflow check are not ported, since 64 bit
+ // calculation should never overflow.
+ } else {
+ // Increment the register. Set carry flag.
+ addi(Rbumped_count, Rbumped_count, DataLayout::counter_increment);
+ // Store the incremented counter.
+ std(Rbumped_count, 0, counter_addr);
+ }
+}
+
+// Set a flag value at the current method data pointer position.
+void InterpreterMacroAssembler::set_mdp_flag_at(int flag_constant,
+ Register scratch) {
+ assert(ProfileInterpreter, "must be profiling interpreter");
+ // Load the data header.
+ lbz(scratch, in_bytes(DataLayout::flags_offset()), R28_mdx);
+ // Set the flag.
+ ori(scratch, scratch, flag_constant);
+ // Store the modified header.
+ stb(scratch, in_bytes(DataLayout::flags_offset()), R28_mdx);
+}
+
+// Test the location at some offset from the method data pointer.
+// If it is not equal to value, branch to the not_equal_continue Label.
+void InterpreterMacroAssembler::test_mdp_data_at(int offset,
+ Register value,
+ Label& not_equal_continue,
+ Register test_out) {
+ assert(ProfileInterpreter, "must be profiling interpreter");
+
+ ld(test_out, offset, R28_mdx);
+ cmpd(CCR0, value, test_out);
+ bne(CCR0, not_equal_continue);
+}
+
+// Update the method data pointer by the displacement located at some fixed
+// offset from the method data pointer.
+void InterpreterMacroAssembler::update_mdp_by_offset(int offset_of_disp,
+ Register scratch) {
+ assert(ProfileInterpreter, "must be profiling interpreter");
+
+ ld(scratch, offset_of_disp, R28_mdx);
+ add(R28_mdx, scratch, R28_mdx);
+}
+
+// Update the method data pointer by the displacement located at the
+// offset (reg + offset_of_disp).
+void InterpreterMacroAssembler::update_mdp_by_offset(Register reg,
+ int offset_of_disp,
+ Register scratch) {
+ assert(ProfileInterpreter, "must be profiling interpreter");
+
+ add(scratch, reg, R28_mdx);
+ ld(scratch, offset_of_disp, scratch);
+ add(R28_mdx, scratch, R28_mdx);
+}
+
+// Update the method data pointer by a simple constant displacement.
+void InterpreterMacroAssembler::update_mdp_by_constant(int constant) {
+ assert(ProfileInterpreter, "must be profiling interpreter");
+ addi(R28_mdx, R28_mdx, constant);
+}
+
+// Update the method data pointer for a _ret bytecode whose target
+// was not among our cached targets.
+void InterpreterMacroAssembler::update_mdp_for_ret(TosState state,
+ Register return_bci) {
+ assert(ProfileInterpreter, "must be profiling interpreter");
+
+ push(state);
+ assert(return_bci->is_nonvolatile(), "need to protect return_bci");
+ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), return_bci);
+ pop(state);
+}
+
+// Increments the backedge counter.
+// Returns backedge counter + invocation counter in Rdst.
+void InterpreterMacroAssembler::increment_backedge_counter(const Register Rcounters, const Register Rdst,
+ const Register Rtmp1, Register Rscratch) {
+ assert(UseCompiler, "incrementing must be useful");
+ assert_different_registers(Rdst, Rtmp1);
+ const Register invocation_counter = Rtmp1;
+ const Register counter = Rdst;
+ // TODO ppc port assert(4 == InvocationCounter::sz_counter(), "unexpected field size.");
+
+ // Load backedge counter.
+ lwz(counter, in_bytes(MethodCounters::backedge_counter_offset()) +
+ in_bytes(InvocationCounter::counter_offset()), Rcounters);
+ // Load invocation counter.
+ lwz(invocation_counter, in_bytes(MethodCounters::invocation_counter_offset()) +
+ in_bytes(InvocationCounter::counter_offset()), Rcounters);
+
+ // Add the delta to the backedge counter.
+ addi(counter, counter, InvocationCounter::count_increment);
+
+ // Mask the invocation counter.
+ li(Rscratch, InvocationCounter::count_mask_value);
+ andr(invocation_counter, invocation_counter, Rscratch);
+
+ // Store new counter value.
+ stw(counter, in_bytes(MethodCounters::backedge_counter_offset()) +
+ in_bytes(InvocationCounter::counter_offset()), Rcounters);
+ // Return invocation counter + backedge counter.
+ add(counter, counter, invocation_counter);
+}
+
+// Count a taken branch in the bytecodes.
+void InterpreterMacroAssembler::profile_taken_branch(Register scratch, Register bumped_count) {
+ if (ProfileInterpreter) {
+ Label profile_continue;
+
+ // If no method data exists, go to profile_continue.
+ test_method_data_pointer(profile_continue);
+
+ // We are taking a branch. Increment the taken count.
+ increment_mdp_data_at(in_bytes(JumpData::taken_offset()), scratch, bumped_count);
+
+ // The method data pointer needs to be updated to reflect the new target.
+ update_mdp_by_offset(in_bytes(JumpData::displacement_offset()), scratch);
+ bind (profile_continue);
+ }
+}
+
+// Count a not-taken branch in the bytecodes.
+void InterpreterMacroAssembler::profile_not_taken_branch(Register scratch1, Register scratch2) {
+ if (ProfileInterpreter) {
+ Label profile_continue;
+
+ // If no method data exists, go to profile_continue.
+ test_method_data_pointer(profile_continue);
+
+ // We are taking a branch. Increment the not taken count.
+ increment_mdp_data_at(in_bytes(BranchData::not_taken_offset()), scratch1, scratch2);
+
+ // The method data pointer needs to be updated to correspond to the
+ // next bytecode.
+ update_mdp_by_constant(in_bytes(BranchData::branch_data_size()));
+ bind (profile_continue);
+ }
+}
+
+// Count a non-virtual call in the bytecodes.
+void InterpreterMacroAssembler::profile_call(Register scratch1, Register scratch2) {
+ if (ProfileInterpreter) {
+ Label profile_continue;
+
+ // If no method data exists, go to profile_continue.
+ test_method_data_pointer(profile_continue);
+
+ // We are making a call. Increment the count.
+ increment_mdp_data_at(in_bytes(CounterData::count_offset()), scratch1, scratch2);
+
+ // The method data pointer needs to be updated to reflect the new target.
+ update_mdp_by_constant(in_bytes(CounterData::counter_data_size()));
+ bind (profile_continue);
+ }
+}
+
+// Count a final call in the bytecodes.
+void InterpreterMacroAssembler::profile_final_call(Register scratch1, Register scratch2) {
+ if (ProfileInterpreter) {
+ Label profile_continue;
+
+ // If no method data exists, go to profile_continue.
+ test_method_data_pointer(profile_continue);
+
+ // We are making a call. Increment the count.
+ increment_mdp_data_at(in_bytes(CounterData::count_offset()), scratch1, scratch2);
+
+ // The method data pointer needs to be updated to reflect the new target.
+ update_mdp_by_constant(in_bytes(VirtualCallData::virtual_call_data_size()));
+ bind (profile_continue);
+ }
+}
+
+// Count a virtual call in the bytecodes.
+void InterpreterMacroAssembler::profile_virtual_call(Register Rreceiver,
+ Register Rscratch1,
+ Register Rscratch2,
+ bool receiver_can_be_null) {
+ if (!ProfileInterpreter) { return; }
+ Label profile_continue;
+
+ // If no method data exists, go to profile_continue.
+ test_method_data_pointer(profile_continue);
+
+ Label skip_receiver_profile;
+ if (receiver_can_be_null) {
+ Label not_null;
+ cmpdi(CCR0, Rreceiver, 0);
+ bne(CCR0, not_null);
+ // We are making a call. Increment the count for null receiver.
+ increment_mdp_data_at(in_bytes(CounterData::count_offset()), Rscratch1, Rscratch2);
+ b(skip_receiver_profile);
+ bind(not_null);
+ }
+
+ // Record the receiver type.
+ record_klass_in_profile(Rreceiver, Rscratch1, Rscratch2, true);
+ bind(skip_receiver_profile);
+
+ // The method data pointer needs to be updated to reflect the new target.
+ update_mdp_by_constant(in_bytes(VirtualCallData::virtual_call_data_size()));
+ bind (profile_continue);
+}
+
+void InterpreterMacroAssembler::profile_typecheck(Register Rklass, Register Rscratch1, Register Rscratch2) {
+ if (ProfileInterpreter) {
+ Label profile_continue;
+
+ // If no method data exists, go to profile_continue.
+ test_method_data_pointer(profile_continue);
+
+ int mdp_delta = in_bytes(BitData::bit_data_size());
+ if (TypeProfileCasts) {
+ mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
+
+ // Record the object type.
+ record_klass_in_profile(Rklass, Rscratch1, Rscratch2, false);
+ }
+
+ // The method data pointer needs to be updated.
+ update_mdp_by_constant(mdp_delta);
+
+ bind (profile_continue);
+ }
+}
+
+void InterpreterMacroAssembler::profile_typecheck_failed(Register Rscratch1, Register Rscratch2) {
+ if (ProfileInterpreter && TypeProfileCasts) {
+ Label profile_continue;
+
+ // If no method data exists, go to profile_continue.
+ test_method_data_pointer(profile_continue);
+
+ int count_offset = in_bytes(CounterData::count_offset());
+ // Back up the address, since we have already bumped the mdp.
+ count_offset -= in_bytes(VirtualCallData::virtual_call_data_size());
+
+ // *Decrement* the counter. We expect to see zero or small negatives.
+ increment_mdp_data_at(count_offset, Rscratch1, Rscratch2, true);
+
+ bind (profile_continue);
+ }
+}
+
+// Count a ret in the bytecodes.
+void InterpreterMacroAssembler::profile_ret(TosState state, Register return_bci, Register scratch1, Register scratch2) {
+ if (ProfileInterpreter) {
+ Label profile_continue;
+ uint row;
+
+ // If no method data exists, go to profile_continue.
+ test_method_data_pointer(profile_continue);
+
+ // Update the total ret count.
+ increment_mdp_data_at(in_bytes(CounterData::count_offset()), scratch1, scratch2 );
+
+ for (row = 0; row < RetData::row_limit(); row++) {
+ Label next_test;
+
+ // See if return_bci is equal to bci[n]:
+ test_mdp_data_at(in_bytes(RetData::bci_offset(row)), return_bci, next_test, scratch1);
+
+ // return_bci is equal to bci[n]. Increment the count.
+ increment_mdp_data_at(in_bytes(RetData::bci_count_offset(row)), scratch1, scratch2);
+
+ // The method data pointer needs to be updated to reflect the new target.
+ update_mdp_by_offset(in_bytes(RetData::bci_displacement_offset(row)), scratch1);
+ b(profile_continue);
+ bind(next_test);
+ }
+
+ update_mdp_for_ret(state, return_bci);
+
+ bind (profile_continue);
+ }
+}
+
+// Count the default case of a switch construct.
+void InterpreterMacroAssembler::profile_switch_default(Register scratch1, Register scratch2) {
+ if (ProfileInterpreter) {
+ Label profile_continue;
+
+ // If no method data exists, go to profile_continue.
+ test_method_data_pointer(profile_continue);
+
+ // Update the default case count
+ increment_mdp_data_at(in_bytes(MultiBranchData::default_count_offset()),
+ scratch1, scratch2);
+
+ // The method data pointer needs to be updated.
+ update_mdp_by_offset(in_bytes(MultiBranchData::default_displacement_offset()),
+ scratch1);
+
+ bind (profile_continue);
+ }
+}
+
+// Count the index'th case of a switch construct.
+void InterpreterMacroAssembler::profile_switch_case(Register index,
+ Register scratch1,
+ Register scratch2,
+ Register scratch3) {
+ if (ProfileInterpreter) {
+ assert_different_registers(index, scratch1, scratch2, scratch3);
+ Label profile_continue;
+
+ // If no method data exists, go to profile_continue.
+ test_method_data_pointer(profile_continue);
+
+ // Build the base (index * per_case_size_in_bytes()) + case_array_offset_in_bytes().
+ li(scratch3, in_bytes(MultiBranchData::case_array_offset()));
+
+ assert (in_bytes(MultiBranchData::per_case_size()) == 16, "so that shladd works");
+ sldi(scratch1, index, exact_log2(in_bytes(MultiBranchData::per_case_size())));
+ add(scratch1, scratch1, scratch3);
+
+ // Update the case count.
+ increment_mdp_data_at(scratch1, in_bytes(MultiBranchData::relative_count_offset()), scratch2, scratch3);
+
+ // The method data pointer needs to be updated.
+ update_mdp_by_offset(scratch1, in_bytes(MultiBranchData::relative_displacement_offset()), scratch2);
+
+ bind (profile_continue);
+ }
+}
+
+void InterpreterMacroAssembler::profile_null_seen(Register Rscratch1, Register Rscratch2) {
+ if (ProfileInterpreter) {
+ assert_different_registers(Rscratch1, Rscratch2);
+ Label profile_continue;
+
+ // If no method data exists, go to profile_continue.
+ test_method_data_pointer(profile_continue);
+
+ set_mdp_flag_at(BitData::null_seen_byte_constant(), Rscratch1);
+
+ // The method data pointer needs to be updated.
+ int mdp_delta = in_bytes(BitData::bit_data_size());
+ if (TypeProfileCasts) {
+ mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
+ }
+ update_mdp_by_constant(mdp_delta);
+
+ bind (profile_continue);
+ }
+}
+
+void InterpreterMacroAssembler::record_klass_in_profile(Register Rreceiver,
+ Register Rscratch1, Register Rscratch2,
+ bool is_virtual_call) {
+ assert(ProfileInterpreter, "must be profiling");
+ assert_different_registers(Rreceiver, Rscratch1, Rscratch2);
+
+ Label done;
+ record_klass_in_profile_helper(Rreceiver, Rscratch1, Rscratch2, 0, done, is_virtual_call);
+ bind (done);
+}
+
+void InterpreterMacroAssembler::record_klass_in_profile_helper(
+ Register receiver, Register scratch1, Register scratch2,
+ int start_row, Label& done, bool is_virtual_call) {
+ if (TypeProfileWidth == 0) {
+ if (is_virtual_call) {
+ increment_mdp_data_at(in_bytes(CounterData::count_offset()), scratch1, scratch2);
+ }
+ return;
+ }
+
+ int last_row = VirtualCallData::row_limit() - 1;
+ assert(start_row <= last_row, "must be work left to do");
+ // Test this row for both the receiver and for null.
+ // Take any of three different outcomes:
+ // 1. found receiver => increment count and goto done
+ // 2. found null => keep looking for case 1, maybe allocate this cell
+ // 3. found something else => keep looking for cases 1 and 2
+ // Case 3 is handled by a recursive call.
+ for (int row = start_row; row <= last_row; row++) {
+ Label next_test;
+ bool test_for_null_also = (row == start_row);
+
+ // See if the receiver is receiver[n].
+ int recvr_offset = in_bytes(VirtualCallData::receiver_offset(row));
+ test_mdp_data_at(recvr_offset, receiver, next_test, scratch1);
+ // delayed()->tst(scratch);
+
+ // The receiver is receiver[n]. Increment count[n].
+ int count_offset = in_bytes(VirtualCallData::receiver_count_offset(row));
+ increment_mdp_data_at(count_offset, scratch1, scratch2);
+ b(done);
+ bind(next_test);
+
+ if (test_for_null_also) {
+ Label found_null;
+ // Failed the equality check on receiver[n]... Test for null.
+ if (start_row == last_row) {
+ // The only thing left to do is handle the null case.
+ if (is_virtual_call) {
+ // Scratch1 contains test_out from test_mdp_data_at.
+ cmpdi(CCR0, scratch1, 0);
+ beq(CCR0, found_null);
+ // Receiver did not match any saved receiver and there is no empty row for it.
+ // Increment total counter to indicate polymorphic case.
+ increment_mdp_data_at(in_bytes(CounterData::count_offset()), scratch1, scratch2);
+ b(done);
+ bind(found_null);
+ } else {
+ cmpdi(CCR0, scratch1, 0);
+ bne(CCR0, done);
+ }
+ break;
+ }
+ // Since null is rare, make it be the branch-taken case.
+ cmpdi(CCR0, scratch1, 0);
+ beq(CCR0, found_null);
+
+ // Put all the "Case 3" tests here.
+ record_klass_in_profile_helper(receiver, scratch1, scratch2, start_row + 1, done, is_virtual_call);
+
+ // Found a null. Keep searching for a matching receiver,
+ // but remember that this is an empty (unused) slot.
+ bind(found_null);
+ }
+ }
+
+ // In the fall-through case, we found no matching receiver, but we
+ // observed the receiver[start_row] is NULL.
+
+ // Fill in the receiver field and increment the count.
+ int recvr_offset = in_bytes(VirtualCallData::receiver_offset(start_row));
+ set_mdp_data_at(recvr_offset, receiver);
+ int count_offset = in_bytes(VirtualCallData::receiver_count_offset(start_row));
+ li(scratch1, DataLayout::counter_increment);
+ set_mdp_data_at(count_offset, scratch1);
+ if (start_row > 0) {
+ b(done);
+ }
+}
+
+// Add a InterpMonitorElem to stack (see frame_sparc.hpp).
+void InterpreterMacroAssembler::add_monitor_to_stack(bool stack_is_empty, Register Rtemp1, Register Rtemp2) {
+
+ // Very-local scratch registers.
+ const Register esp = Rtemp1;
+ const Register slot = Rtemp2;
+
+ // Extracted monitor_size.
+ int monitor_size = frame::interpreter_frame_monitor_size_in_bytes();
+ assert(Assembler::is_aligned((unsigned int)monitor_size,
+ (unsigned int)frame::alignment_in_bytes),
+ "size of a monitor must respect alignment of SP");
+
+ resize_frame(-monitor_size, /*temp*/esp); // Allocate space for new monitor
+ std(R1_SP, _ijava_state_neg(top_frame_sp), esp); // esp contains fp
+
+ // Shuffle expression stack down. Recall that stack_base points
+ // just above the new expression stack bottom. Old_tos and new_tos
+ // are used to scan thru the old and new expression stacks.
+ if (!stack_is_empty) {
+ Label copy_slot, copy_slot_finished;
+ const Register n_slots = slot;
+
+ addi(esp, R15_esp, Interpreter::stackElementSize); // Point to first element (pre-pushed stack).
+ subf(n_slots, esp, R26_monitor);
+ srdi_(n_slots, n_slots, LogBytesPerWord); // Compute number of slots to copy.
+ assert(LogBytesPerWord == 3, "conflicts assembler instructions");
+ beq(CCR0, copy_slot_finished); // Nothing to copy.
+
+ mtctr(n_slots);
+
+ // loop
+ bind(copy_slot);
+ ld(slot, 0, esp); // Move expression stack down.
+ std(slot, -monitor_size, esp); // distance = monitor_size
+ addi(esp, esp, BytesPerWord);
+ bdnz(copy_slot);
+
+ bind(copy_slot_finished);
+ }
+
+ addi(R15_esp, R15_esp, -monitor_size);
+ addi(R26_monitor, R26_monitor, -monitor_size);
+
+ // Restart interpreter
+}
+
+// ============================================================================
+// Java locals access
+
+// Load a local variable at index in Rindex into register Rdst_value.
+// Also puts address of local into Rdst_address as a service.
+// Kills:
+// - Rdst_value
+// - Rdst_address
+void InterpreterMacroAssembler::load_local_int(Register Rdst_value, Register Rdst_address, Register Rindex) {
+ sldi(Rdst_address, Rindex, Interpreter::logStackElementSize);
+ subf(Rdst_address, Rdst_address, R18_locals);
+ lwz(Rdst_value, 0, Rdst_address);
+}
+
+// Load a local variable at index in Rindex into register Rdst_value.
+// Also puts address of local into Rdst_address as a service.
+// Kills:
+// - Rdst_value
+// - Rdst_address
+void InterpreterMacroAssembler::load_local_long(Register Rdst_value, Register Rdst_address, Register Rindex) {
+ sldi(Rdst_address, Rindex, Interpreter::logStackElementSize);
+ subf(Rdst_address, Rdst_address, R18_locals);
+ ld(Rdst_value, -8, Rdst_address);
+}
+
+// Load a local variable at index in Rindex into register Rdst_value.
+// Also puts address of local into Rdst_address as a service.
+// Input:
+// - Rindex: slot nr of local variable
+// Kills:
+// - Rdst_value
+// - Rdst_address
+void InterpreterMacroAssembler::load_local_ptr(Register Rdst_value, Register Rdst_address, Register Rindex) {
+ sldi(Rdst_address, Rindex, Interpreter::logStackElementSize);
+ subf(Rdst_address, Rdst_address, R18_locals);
+ ld(Rdst_value, 0, Rdst_address);
+}
+
+// Load a local variable at index in Rindex into register Rdst_value.
+// Also puts address of local into Rdst_address as a service.
+// Kills:
+// - Rdst_value
+// - Rdst_address
+void InterpreterMacroAssembler::load_local_float(FloatRegister Rdst_value, Register Rdst_address, Register Rindex) {
+ sldi(Rdst_address, Rindex, Interpreter::logStackElementSize);
+ subf(Rdst_address, Rdst_address, R18_locals);
+ lfs(Rdst_value, 0, Rdst_address);
+}
+
+// Load a local variable at index in Rindex into register Rdst_value.
+// Also puts address of local into Rdst_address as a service.
+// Kills:
+// - Rdst_value
+// - Rdst_address
+void InterpreterMacroAssembler::load_local_double(FloatRegister Rdst_value, Register Rdst_address, Register Rindex) {
+ sldi(Rdst_address, Rindex, Interpreter::logStackElementSize);
+ subf(Rdst_address, Rdst_address, R18_locals);
+ lfd(Rdst_value, -8, Rdst_address);
+}
+
+// Store an int value at local variable slot Rindex.
+// Kills:
+// - Rindex
+void InterpreterMacroAssembler::store_local_int(Register Rvalue, Register Rindex) {
+ sldi(Rindex, Rindex, Interpreter::logStackElementSize);
+ subf(Rindex, Rindex, R18_locals);
+ stw(Rvalue, 0, Rindex);
+}
+
+// Store a long value at local variable slot Rindex.
+// Kills:
+// - Rindex
+void InterpreterMacroAssembler::store_local_long(Register Rvalue, Register Rindex) {
+ sldi(Rindex, Rindex, Interpreter::logStackElementSize);
+ subf(Rindex, Rindex, R18_locals);
+ std(Rvalue, -8, Rindex);
+}
+
+// Store an oop value at local variable slot Rindex.
+// Kills:
+// - Rindex
+void InterpreterMacroAssembler::store_local_ptr(Register Rvalue, Register Rindex) {
+ sldi(Rindex, Rindex, Interpreter::logStackElementSize);
+ subf(Rindex, Rindex, R18_locals);
+ std(Rvalue, 0, Rindex);
+}
+
+// Store an int value at local variable slot Rindex.
+// Kills:
+// - Rindex
+void InterpreterMacroAssembler::store_local_float(FloatRegister Rvalue, Register Rindex) {
+ sldi(Rindex, Rindex, Interpreter::logStackElementSize);
+ subf(Rindex, Rindex, R18_locals);
+ stfs(Rvalue, 0, Rindex);
+}
+
+// Store an int value at local variable slot Rindex.
+// Kills:
+// - Rindex
+void InterpreterMacroAssembler::store_local_double(FloatRegister Rvalue, Register Rindex) {
+ sldi(Rindex, Rindex, Interpreter::logStackElementSize);
+ subf(Rindex, Rindex, R18_locals);
+ stfd(Rvalue, -8, Rindex);
+}
+
+// Read pending exception from thread and jump to interpreter.
+// Throw exception entry if one if pending. Fall through otherwise.
+void InterpreterMacroAssembler::check_and_forward_exception(Register Rscratch1, Register Rscratch2) {
+ assert_different_registers(Rscratch1, Rscratch2, R3);
+ Register Rexception = Rscratch1;
+ Register Rtmp = Rscratch2;
+ Label Ldone;
+ // Get pending exception oop.
+ ld(Rexception, thread_(pending_exception));
+ cmpdi(CCR0, Rexception, 0);
+ beq(CCR0, Ldone);
+ li(Rtmp, 0);
+ mr_if_needed(R3, Rexception);
+ std(Rtmp, thread_(pending_exception)); // Clear exception in thread
+ if (Interpreter::rethrow_exception_entry() != NULL) {
+ // Already got entry address.
+ load_dispatch_table(Rtmp, (address*)Interpreter::rethrow_exception_entry());
+ } else {
+ // Dynamically load entry address.
+ int simm16_rest = load_const_optimized(Rtmp, &Interpreter::_rethrow_exception_entry, R0, true);
+ ld(Rtmp, simm16_rest, Rtmp);
+ }
+ mtctr(Rtmp);
+ save_interpreter_state(Rtmp);
+ bctr();
+
+ align(32, 12);
+ bind(Ldone);
+}
+
+void InterpreterMacroAssembler::call_VM(Register oop_result, address entry_point, bool check_exceptions) {
+ save_interpreter_state(R11_scratch1);
+
+ MacroAssembler::call_VM(oop_result, entry_point, false);
+
+ restore_interpreter_state(R11_scratch1, /*bcp_and_mdx_only*/ true);
+
+ check_and_handle_popframe(R11_scratch1);
+ check_and_handle_earlyret(R11_scratch1);
+ // Now check exceptions manually.
+ if (check_exceptions) {
+ check_and_forward_exception(R11_scratch1, R12_scratch2);
+ }
+}
+
+void InterpreterMacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, bool check_exceptions) {
+ // ARG1 is reserved for the thread.
+ mr_if_needed(R4_ARG2, arg_1);
+ call_VM(oop_result, entry_point, check_exceptions);
+}
+
+void InterpreterMacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, Register arg_2, bool check_exceptions) {
+ // ARG1 is reserved for the thread.
+ mr_if_needed(R4_ARG2, arg_1);
+ assert(arg_2 != R4_ARG2, "smashed argument");
+ mr_if_needed(R5_ARG3, arg_2);
+ call_VM(oop_result, entry_point, check_exceptions);
+}
+
+void InterpreterMacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, Register arg_2, Register arg_3, bool check_exceptions) {
+ // ARG1 is reserved for the thread.
+ mr_if_needed(R4_ARG2, arg_1);
+ assert(arg_2 != R4_ARG2, "smashed argument");
+ mr_if_needed(R5_ARG3, arg_2);
+ assert(arg_3 != R4_ARG2 && arg_3 != R5_ARG3, "smashed argument");
+ mr_if_needed(R6_ARG4, arg_3);
+ call_VM(oop_result, entry_point, check_exceptions);
+}
+
+void InterpreterMacroAssembler::save_interpreter_state(Register scratch) {
+ ld(scratch, 0, R1_SP);
+ std(R15_esp, _ijava_state_neg(esp), scratch);
+ std(R14_bcp, _ijava_state_neg(bcp), scratch);
+ std(R26_monitor, _ijava_state_neg(monitors), scratch);
+ if (ProfileInterpreter) { std(R28_mdx, _ijava_state_neg(mdx), scratch); }
+ // Other entries should be unchanged.
+}
+
+void InterpreterMacroAssembler::restore_interpreter_state(Register scratch, bool bcp_and_mdx_only) {
+ ld(scratch, 0, R1_SP);
+ ld(R14_bcp, _ijava_state_neg(bcp), scratch); // Changed by VM code (exception).
+ if (ProfileInterpreter) { ld(R28_mdx, _ijava_state_neg(mdx), scratch); } // Changed by VM code.
+ if (!bcp_and_mdx_only) {
+ // Following ones are Metadata.
+ ld(R19_method, _ijava_state_neg(method), scratch);
+ ld(R27_constPoolCache, _ijava_state_neg(cpoolCache), scratch);
+ // Following ones are stack addresses and don't require reload.
+ ld(R15_esp, _ijava_state_neg(esp), scratch);
+ ld(R18_locals, _ijava_state_neg(locals), scratch);
+ ld(R26_monitor, _ijava_state_neg(monitors), scratch);
+ }
+#ifdef ASSERT
+ {
+ Label Lok;
+ subf(R0, R1_SP, scratch);
+ cmpdi(CCR0, R0, frame::abi_reg_args_size + frame::ijava_state_size);
+ bge(CCR0, Lok);
+ stop("frame too small (restore istate)", 0x5432);
+ bind(Lok);
+ }
+ {
+ Label Lok;
+ ld(R0, _ijava_state_neg(ijava_reserved), scratch);
+ cmpdi(CCR0, R0, 0x5afe);
+ beq(CCR0, Lok);
+ stop("frame corrupted (restore istate)", 0x5afe);
+ bind(Lok);
+ }
+#endif
+}
+
+#endif // !CC_INTERP
+
void InterpreterMacroAssembler::get_method_counters(Register method,
Register Rcounters,
Label& skip) {
@@ -321,6 +1957,66 @@
if (state == atos) { MacroAssembler::verify_oop(reg); }
}
+#ifndef CC_INTERP
+// Local helper function for the verify_oop_or_return_address macro.
+static bool verify_return_address(Method* m, int bci) {
+#ifndef PRODUCT
+ address pc = (address)(m->constMethod()) + in_bytes(ConstMethod::codes_offset()) + bci;
+ // Assume it is a valid return address if it is inside m and is preceded by a jsr.
+ if (!m->contains(pc)) return false;
+ address jsr_pc;
+ jsr_pc = pc - Bytecodes::length_for(Bytecodes::_jsr);
+ if (*jsr_pc == Bytecodes::_jsr && jsr_pc >= m->code_base()) return true;
+ jsr_pc = pc - Bytecodes::length_for(Bytecodes::_jsr_w);
+ if (*jsr_pc == Bytecodes::_jsr_w && jsr_pc >= m->code_base()) return true;
+#endif // PRODUCT
+ return false;
+}
+
+void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) {
+ if (VerifyFPU) {
+ unimplemented("verfiyFPU");
+ }
+}
+
+void InterpreterMacroAssembler::verify_oop_or_return_address(Register reg, Register Rtmp) {
+ if (!VerifyOops) return;
+
+ // The VM documentation for the astore[_wide] bytecode allows
+ // the TOS to be not only an oop but also a return address.
+ Label test;
+ Label skip;
+ // See if it is an address (in the current method):
+
+ const int log2_bytecode_size_limit = 16;
+ srdi_(Rtmp, reg, log2_bytecode_size_limit);
+ bne(CCR0, test);
+
+ address fd = CAST_FROM_FN_PTR(address, verify_return_address);
+ unsigned int nbytes_save = 10*8; // 10 volatile gprs
+
+ save_LR_CR(Rtmp);
+ push_frame_reg_args(nbytes_save, Rtmp);
+ save_volatile_gprs(R1_SP, 112); // except R0
+
+ load_const_optimized(Rtmp, fd, R0);
+ mr_if_needed(R4_ARG2, reg);
+ mr(R3_ARG1, R19_method);
+ call_c(Rtmp); // call C
+
+ restore_volatile_gprs(R1_SP, 112); // except R0
+ pop_frame();
+ restore_LR_CR(Rtmp);
+ b(skip);
+
+ // Perform a more elaborate out-of-line call.
+ // Not an address; verify it:
+ bind(test);
+ verify_oop(reg);
+ bind(skip);
+}
+#endif // !CC_INTERP
+
// Inline assembly for:
//
// if (thread is in interp_only_mode) {
@@ -343,13 +2039,12 @@
cmpwi(CCR0, R0, 0);
beq(CCR0, jvmti_post_done);
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_entry),
- /*check_exceptions=*/false);
+ /*check_exceptions=*/true CC_INTERP_ONLY(&& false));
bind(jvmti_post_done);
}
}
-
// Inline assembly for:
//
// if (thread is in interp_only_mode) {
@@ -365,26 +2060,33 @@
//
// Native methods have their result stored in d_tmp and l_tmp.
// Java methods have their result stored in the expression stack.
-void InterpreterMacroAssembler::notify_method_exit(bool is_native_method, TosState state) {
+void InterpreterMacroAssembler::notify_method_exit(bool is_native_method, TosState state,
+ NotifyMethodExitMode mode, bool check_exceptions) {
// JVMTI
// Whenever JVMTI puts a thread in interp_only_mode, method
// entry/exit events are sent for that thread to track stack
// depth. If it is possible to enter interp_only_mode we add
// the code to check if the event should be sent.
- if (JvmtiExport::can_post_interpreter_events()) {
+ if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) {
Label jvmti_post_done;
lwz(R0, in_bytes(JavaThread::interp_only_mode_offset()), R16_thread);
cmpwi(CCR0, R0, 0);
beq(CCR0, jvmti_post_done);
+ CC_INTERP_ONLY(assert(is_native_method && !check_exceptions, "must not push state"));
+ if (!is_native_method) push(state); // Expose tos to GC.
call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit),
- /*check_exceptions=*/false);
+ /*check_exceptions=*/check_exceptions);
+ if (!is_native_method) pop(state);
align(32, 12);
bind(jvmti_post_done);
}
+
+ // Dtrace support not implemented.
}
+#ifdef CC_INTERP
// Convert the current TOP_IJAVA_FRAME into a PARENT_IJAVA_FRAME
// (using parent_frame_resize) and push a new interpreter
// TOP_IJAVA_FRAME (using frame_size).
@@ -442,7 +2144,6 @@
std(R1_SP, _top_ijava_frame_abi(top_frame_sp), R1_SP);
}
-#ifdef CC_INTERP
// Turn state's interpreter frame into the current TOP_IJAVA_FRAME.
void InterpreterMacroAssembler::pop_interpreter_frame_to_state(Register state, Register tmp1, Register tmp2, Register tmp3) {
assert_different_registers(R14_state, R15_prev_state, tmp1, tmp2, tmp3);
@@ -471,7 +2172,6 @@
// Used for non-initial callers by unextended_sp().
std(R1_SP, _top_ijava_frame_abi(initial_caller_sp), R1_SP);
}
-#endif // CC_INTERP
// Set SP to initial caller's sp, but before fix the back chain.
void InterpreterMacroAssembler::resize_frame_to_initial_caller(Register tmp1, Register tmp2) {
@@ -481,7 +2181,6 @@
mr(R1_SP, tmp1); // ... and resize to initial caller.
}
-#ifdef CC_INTERP
// Pop the current interpreter state (without popping the correspoding
// frame) and restore R14_state and R15_prev_state accordingly.
// Use prev_state_may_be_0 to indicate whether prev_state may be 0