--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/make/netbeans/README Sat Dec 01 00:00:00 2007 +0000
@@ -0,0 +1,632 @@
+Working on OpenJDK using NetBeans
+ This note describes how to work on the OpenJDK from NetBeans. We've
+ provided several NetBeans projects as starting points. Below we'll
+ describe how to use them, as well as how to create your own.
+
+Getting Started
+ In addition to the source bundle for Open JDK, you'll need to download
+ and install copies of the JDK and of NetBeans 6. And if you want to run
+ tests on the JDK (you do want to run tests, right?), you'll need to
+ install the jtreg test harness.
+
+ In this note, when pathnames are not fully specified, they should be
+ interpreted as being relative to the directory containing this README
+ and the NetBeans projects themselves.
+
+ The JDK build process is largely make-based, and is not
+ exceptionally tolerant of pathnames with spaces in them (such as
+ "Program Files". Please be sure to install everything in a
+ directories whose paths don't have any spaces!
+
+ Downloading the JDK
+ You've probably done this a million times. Download and install it
+ from http://java.sun.com/javase
+
+ Downloading the OpenJDK sources
+ Since you're reading this, d you've already downloaded the OpenJDK
+ source bundle. Later in this document we'll refer to the location
+ where you installed the Open JDK sources as *install-dir*.
+
+ Downloading a pre-built, JDK 7
+ This will be necessary to do builds of some of the projects. In
+ general, you want to download and install a pre-built JDK that
+ corresponds to the OpenJDK sources you download. Building the entire
+ OpenJDK depends on a few parts of the pre-built JDK. Get this from
+ http://download.java.net/jdk7/binaries
+
+ Note: For working on certain projects, like JMX and JConsole, you
+ may find convenient to use a pre-built version of JDK 7 (or
+ OpenJDK) rather than building your own. This will allow you
+ to build only that part of the OpenJDK sources which correspond
+ to that project.
+
+ NetBeans 6
+ Yep, NetBeans *6*. Nope, not FCS'd yet. We're on the edge here,
+ enjoy it! Get the latest working development build of NetBeans 6
+ from http://netbeans.org
+
+ jtreg
+ "jtreg" is the test harness for running OpenJDK's regression tests.
+ Get it from http://openjdk.java.net/jtreg
+
+ Ant
+ NetBeans comes with ant, but if you use a separately-installed copy
+ please make sure that it is at least version 1.7.0.
+
+Configuring
+ Building OpenJDK is hard and complex. No, strike that. While it's not
+ exactly "easy", we've got it down to *relatively* small set of
+ properties you need to set.
+
+ The NetBeans projects provided here share a fair amount of common
+ structure. They share properties values where it makes sense. Each
+ project loads properties from these properties files, in this order
+
+ ${basedir}/nbproject/private/build.properties
+ $HOME/.openjdk/${ant.project.name}-build.properties
+ $HOME/.openjdk/build.properties
+ ${basedir}/build.properties
+
+ (${basedir} refers to the directory containing a particular NetBeans
+ project.) The first time a property defined determines value: it is
+ *not* overridden if it is read from properties files read later. The net
+ result is that by carefully choosing where to define a property, you can
+ have it for a specific project, all uses of a specific project (useful
+ if you work on multiple copies of the OpenJDK sources), all projects, or
+ only projects in a specific sandbox.
+
+ With that in mind, please set the following properties. Presuming you
+ want the same values for all your work, set them in
+ $HOME/.openjdk/build.properties.
+
+ * bootstrap.jdk
+ Set to the location where you installed JDK 7.
+
+ * jtreg.home
+ Set to the location where you installed jtreg.
+
+ * make.options
+ Some of the projects invoke "make", since they compile native code.
+ The make.options property is for passing information about what you
+ installed where to make. Change the paths to fit your particular
+ situation:
+
+ make.options=\
+ ALT_BOOTDIR=/home/me/bin/jdk1.6.0 \
+ ALT_BINARY_PLUGS_PATH=/home/me/bin/openjdk-binary-plugs \
+ ALT_JDK_IMPORT_PATH=/home/me/bin/jdk1.7.0 \
+ OPENJDK=true
+
+ The trailing '\' are important, so that make gets the above as a
+ single set of options.
+
+ You might want to add additional additional options: see the README
+ for the project you're using for more information. And see
+ *install-dir*/jdk/make/README-builds.html
+ to read much more about building the JDK.
+
+ Windows-specific configuration
+ First, please note that the entire JDK cannot currently be built on
+ Windows platforms. This will likely limit your ability to build
+ make-based projects. See
+ *install-dir*/jdk/make/README-builds.html
+ for full information on issues with building on the Windows platform.
+
+ That said, there are two ways to work with the Windows-required settings
+ for the Microsoft tools. Either:
+
+ * Set environment variables values in Windows
+ Doing so means accessing the System control panel in Windows, and
+ setting the environment variables there.
+
+ By doing so, you can launch NetBeans by double-clicking its icon,
+ and the environment variable values will be available.
+
+ * Set environment variable values in a shell
+ Doing so means adding the settings to an init file (e.g. .bashrc,
+ .cshrc, etc.) or a file that you source before running NetBeans. In
+ this case, you'll have to launch NetBeans from the command line in a
+ shell in which you've set the environment variables.
+
+ In either case, the end result should be that the settings are available
+ to the make-based build process when it runs from within NetBeans.
+
+ The make-based builds presumes that you're using cygwin, and expects to
+ find "make" in c:\cygwin\bin\make. If you've installed cygwin elsewhere,
+ set "make" in a properties file.
+
+ Configuring Project Properties
+ A note of caution is in order: These are NetBeans *freeform* projects.
+ If you use the NetBeans GUI to examine them, things are likely to not
+ look "right". Please don't edit them there, please instead use a text
+ editor.
+
+ Locale Requirements
+ To build the Open JDK sources, be certain that you are using the "C"
+ locale on Unix (R) platforms, or "English (United States)" locale on
+ Windows.
+
+Platforms and architectures, oh my!
+ The Open JDK can be built for a variety of operating system platforms
+ and hardware architectures. The resulting builds are always placed in a
+ directory which contains the platform and architecture as part of the
+ pathname, as in *platform*-*arch*. For example, if you build the jdk
+ project on a Linux platform running on x86 hardware, the resulting build
+ will be in:
+
+ *install-dir*/jdk/build/linux-i586
+
+ We've provided support for some platforms and architectures in
+ common/architectures. Add another, if your needs require it.
+
+Provided NetBeans projects
+ This section describes the NetBeans projects that help you work on
+ particular parts of the JDK. While they're largely similar in structure
+ and should work the way you expect NetBeans projects to work: edit,
+ build, test, etc. But there are some differences. They don't all support
+ the same targets (e.g., there's nothing to run in jarzip project).
+
+ Some projects are built by invoking make, since they involve compilation
+ of native code or other activities that cannot be done by javac. We call
+ these "make-based", and call all others "ant-based".
+
+ They all are configured by way of a build.properties file, which
+ specifies what subdirectories of the JDK sources they manipulate, what
+ directories contain their tests, whether they use make or ant, etc.
+
+ The very first time you open any one of these projects on set of Open
+ JDK sources, NetBeans will scan the entire set of sources, not just
+ those for the project you opened. This will take a few minutes, but will
+ ensure that Go To Type, Go To Source, and so on work as expected. Later,
+ when you open other projects on the same Open JDK sources, there will be
+ at most a slight delay.
+
+ There's a README accompanying each project. Most are text files, which
+ you can Open in NetBeans, some are HTML files, in which case unless you
+ enjoy reading raw HTML, you're better off choosing the *View* menu item
+ from the context menu, which will display the README in your web
+ browser.
+
+ Finally, note that these projects were all created by different people,
+ and are while some attempt has been made to make them look and behave
+ the same, they are maintained separately and will vary somewhat.
+
+ The projects currently provided are:
+
+ jdk (directory "jdk")
+ A convenient starting point for the other projects, and from which
+ you can build the entire OpenJDK. Please note that depending on your
+ hardware, this could take a *very* long time. The results of the
+ build are in *install-dir*/jdk/build/*platform*-*arch*.
+
+ world (directory "world")
+ This project builds both the Hotspot VM and all of JavaSE. Please
+ note that pretty much regardless of your hardware, this *will* take
+ a long time, and use *lots* of disk space (more than 3GB). The
+ results of the build are in
+ *install-dir*/control/build/*platform*-*arch* and
+ *install-dir*/control/build/*platform*-*arch*-fastdebug.
+
+ Consult the project's README file for details.
+
+ AWT & Java2d (directory "awt2d")
+ For working on AWT and Java2d. Supports running the Font2DTest demo.
+
+ This is a make-based project: In order to build this project, you
+ should build the jdk project first, since AWT and Java2d include
+ native code.
+
+ JConsole (directory "jconsole")
+ For working on JConsole. Creates ../dist/lib/jconsole.jar. Supports
+ running and debugging JConsole.
+
+ This ant-based project does *not* require that you build the jdk
+ project first, provided that you use a pre-built version of JDK 7.
+
+ Java (TM) Management Extensions (JMX(TM)) API (directory "jmx")
+ For working on JMX source code. Creates ../dist/lib/jmx.jar.
+
+ This ant-based project does *not* require that you build the jdk
+ project first, provided that you use a pre-built version of JDK 7.
+
+ Jar & Zip (directory "jarzip")
+ For working on jar & zip. It builds the zip library (including
+ native code), the jar library, and the jar tool. Creates an
+ executable jar program in ../build/*platform*-*arch*/bin/jar.
+
+ This is a make-based project: In order to build this project, you
+ should build the jdk project first, since AWT and Java2d include
+ native code.
+
+ Swing (directory "swing")
+ For working on Swing. Creates ../dist/lib/swing.jar. Supports
+ running and debugging the SampleTree demo.
+
+ This ant-based project does *not* require that you build the jdk
+ project first, provided that you use a pre-built version of JDK 7.
+
+ In addition, there are projects for building the compiler, javadoc,
+ and related tools, in the OpenJDK langtools component. These
+ projects are separate from those described here, and have their
+ own set of guidelines and conventions. For more details, see the
+ README files in make/netbeans in the OpenJDK langtools component.
+
+Running Tests
+ We use the jtreg test harness, described more fully at
+ http://openjdk.java.net/jtreg
+
+ The OpenJDK tests are in the default Java package, are public classes,
+ and have a "static void main(String[] args)" with which they are
+ invoked. Some tests are actually shell scripts, which might compile
+ code, etc. jtreg is quite flexible.
+
+ To run tests for a project, use *Test Project* from NetBeans. From the
+ command line, you can invoke "ant jtreg" on any individual project's
+ build.xml file.
+
+ In either NetBeans of on the command line, jtreg prints summary output
+ about the pass/fail nature of each test. An HTML report of the entire
+ test run is
+
+ ../build/*platform*-*arch*/jtreg/*ant-project-name*/JTreport/report.html
+
+ In that same JTreport directory are also individual HTML files
+ summarizing the test environment, test passes and failures, etc.
+
+ More detail on any individual test is under
+
+ ../build/*platform*-*arch*/jtreg/*ant-project-name*/JTwork.
+
+ For example, details about the awt/Modal/SupportedTest/SupportedTest
+ test are under the JTwork directory at the same pathname as the test
+ itself in a ".jtr" file. For example:
+
+ ../build/*platform*-*arch*/jtreg/*ant-project-name*/JTwork/awt/Modal/SupportedTest/SupportedTest.jtr
+
+ Sometimes you will see that running jtreg has resulted in a failure.
+ This does not always mean that a test has an error in it. Jtreg
+ distinguishes between these two cases. There are a number of tests that
+ are "ignored", and not run, and these are reported as failures.
+
+ You can run a single test by right clicking on it and choosing *Run
+ File* from the context menu. Similarly, you can debug a single test by
+ choosing *Debug File*.
+
+Debugging
+ Debugging is enabled by default in ant-based projects, as if
+ "-g:lines,vars,source" were given. You can alter these settings via
+ entries in one of the configuration properties files. For example:
+
+ javac.debug=false
+ javac.debuglevel=<debug level options>
+
+ To debug a project or test, use NetBeans in the normal way, with *Debug
+ Project* or *Debug File*. Note that not all projects provide a target
+ that can be debugged, but tests can be debugged.
+
+Creating Javadoc
+ You can create Javadoc for any of the projects: just choose *Generate
+ Javadoc for Project* from the NetBeans menu. Your default browser will
+ open up, displaying the just-generated javadoc.
+
+ Javadoc gets generated into a separate subdirectory for each project.
+ For example, the Jar & Zip project's javadoc gets generated in
+
+ ../build/*platform*-*arch*/jtreg/*ant-project-name*/javadoc/jarzip
+
+Cleaning projects
+ Each project can of course be cleaned. Make-based and ant-based projects
+ differ a little in what exactly gets cleaned. In both cases, all jtreg
+ results and javadoc are removed.
+
+ In ant-based projects, project-specific files as determined by the
+ project's build.properties file are removed from the classes and gensrc
+ directories that are under ../build/*platform*-*arch*.
+
+ In make-based projects, "make clean" is run in the same directories as
+ "make all" is run when building the project.
+
+ Please note that the jdk project is "special" with respect to
+ cleaning: in this case, the entire ../build directory is removed.
+ Similar for the world project.
+
+Creating your own NetBeans project
+ The project's we've provided are hopefully a useful starting point, but
+ chances are that you want to work on something else. This section will
+ describe how to select an existing project, and then adapt it to your
+ needs.
+
+ Considerations
+ The first consideration is whether or not the code in which you're
+ interested needs anything beyond javac and copying of resources to
+ build. If so, then you'll need to create a make-based project. If not,
+ an ant-based project is possible. See the project descriptions above to
+ learn which are make-based, and which are ant-based.
+
+ The second consideration is to consider the files that you'll need. Each
+ project is defined by 3 files:
+
+ * build.xml
+ This is the ant build script. For a make-based project, they tend to
+ have a target for "make clean" and another for "make all", each of
+ which invokes "make-run" in the same set of directories. Take a look
+ at jarzip/build.xml for an example.
+
+ For an ant-based project, there might be nothing, with all the work
+ done via the declaration of properties in the build.properties file.
+ Take a look at jconsole/build.xml for an example, and notice how it
+ overrides the -pre-compile and -post-compile targets that are
+ defined in common/shared.xml (where they are defined to do nothing).
+
+ * build.properties
+ This file defines the directories (and possibly files) that are
+ included in and excluded from. Basically, a file is considered to be
+ in a project if it is mentioned in the includes list, or is
+ contained under a directory mentioned in that list, *unless* it is
+ explicitly excluded or is contained under a directory that is
+ excluded. Take a look awt2d/build.properties for an example.
+
+ * nbproject/project.xml
+ This file defines a project for NetBeans for a "freeform" project.
+ Each declares several entity references, which are used later in the
+ project. For an example, see javadoc/nbproject/project.xml, which is
+ an ant-based project. Compare that with
+ jarzip/nbproject/project.xml, which is make-based. Not much
+ difference! That's because while the jarzip project is make-based,
+ it does not have any platform-specifc native code. Contrast that
+ with awt2d/nbproject/project.xml, which does have native code;
+ notice that it uses platform-specific entity references.
+
+ In summary, we recommend exploring the given projects, and choosing one
+ that most closely suits our needs.
+
+ Example: A project for working on collections
+ Let's create a project to work with on the collections classes. There's no native
+ code here, so an ant-based project will do. Therefore, the jconsole
+ project is a reasonable project to use as a starting point.
+
+ Clone the existing project
+ Make a directory for the collections project next to the existing projects:
+
+ % mkdir -p collections/nbproject
+
+ Copy files from the jconsole project:
+
+ % cp jconsole/build.properties collections
+ % cp jconsole/build.xml collections
+ % cp jconsole/nbproject/project.xml collections/nbproject
+
+ Change the set of files included in the project
+ The collections sources are all under one directory, and we want to include
+ them all. The same is true of the tests. So edit
+ collections/build.properties so that it contains these lines:
+
+ includes=\
+ java/util/
+ excludes=\
+ java/util/Calendar.java,\
+ java/util/jar/,\
+ java/util/logging/,\
+ java/util/prefs/,\
+ java/util/regex/,\
+ java/util/spi/,\
+ java/util/zip/,\
+ **/*-XLocales.java
+ jtreg.tests=\
+ java/util/**/*Collection/ \
+ java/util/**/*Map/ \
+ java/util/**/*Set/ \
+ java/util/**/*List/
+
+ Notice the trailing "/" in some of those pathnames: that tells NetBeans to
+ treat the path as a directory and include (or exclude) everything beneath
+ it in the hierarchy. Note also how we include java/util, but then exclude
+ several directories under that which are not related to collections.
+
+ The build.xml for collections is about as simple as can be. First, change the
+ name of the project:
+
+ <project name="collections" default="build" basedir=".">
+
+ Then remove the -pre-compile target from the build.xml. Change the
+ -post-compile target to create collections.jar without any manifest, and
+ to only contain the collections-related classes. The jar task now looks
+ like this:
+
+ <jar destfile="${dist.dir}/lib/collections.jar">
+ <fileset dir="${classes.dir}">
+ <include name="java/util/*.class"/>
+ <exclude name="java/util/Calendar*.class"/>
+ </fileset>
+ </jar>
+
+ Also, change the clean target to remove collections.jar instead of
+ jconsole.jar.
+
+ Now edit project.xml file. NetBeans uses an internal name and a
+ user-visible name, both of which should be changed:
+
+ <name>Collections</name> <!-- Customized -->
+
+ <property name="name">collections</property> <!-- Customized -->
+
+ Inside of <ide-actions>, you'll see actions defined for "run" and
+ "debug". The Open JDK sources don't include any interesting Collections
+ demos, but leave these here for now: Chances are you'll find or create
+ some collections app of your own, and want to run and or debug it.
+
+ Now, open the Collections project in NetBeans. You'll find that it operates
+ just like all the other projects.
+
+ If/when you want to have this project run a collections demo, change the run
+ target in collections/build.xml to invoke it in whatever manner is appropriate
+ for the app. From NetBeans, you should be able to run and debug the app,
+ including setting breakpoints in collections code.
+
+Appendix 1: Customizations
+ There are several ways to customize NetBeans projects. These projects
+ share a common structure, based on common/shared.xml and
+ common/make.xml. Because of that sharing, some mechanisms described
+ below apply to most any project.
+
+ Several properties can be user-defined (and several should not be
+ user-defined!). There are different properties files read. Some default
+ targets can be overridden.
+
+ Property files
+ When projects are started, and when when ant runs (whether from NetBeans
+ or the command line), these properties files are loaded in the order
+ shown:
+
+ ${basedir}/nbproject/private/build.properties
+ $HOME/.openjdk/${ant.project.name}-build.properties
+ $HOME/.openjdk/build.properties
+ ${basedir}/build.properties
+
+ Recall that with ant, once a property is defined, its value cannot be
+ changed, so it's "first one wins".
+
+ To set or change a property for all your projects, put the change into
+ $HOME/.openjdk/build.properties. This will affect all projects,
+ regardless of how many copies of the Open JDK sources you have
+ installed.
+
+ Let's say you have 2 copies of the Open JDK sources installed on your
+ machine. To set or change a property for only the jconsole projects, but
+ for both of them, make the change in
+ $HOME/.openjdk/${ant.project.name}-build.properties. If you wanted to
+ make the change for only one of them, do it in that project's
+ ${basedir}/build.properties or
+ ${basedir}/nbproject/private/build.properties.
+
+ Note that the ${basedir}/build.properties file is provided as part of
+ the Open JDK sources. If you want to make a change for a particular
+ project, you can do so there. To be sure that you don't ever
+ accidentally check it in to the Open JDK sources, you might prefer to
+ change it in ${basedir}/nbproject/private/build.properties.
+
+ User-definable Properties
+ You can provide your own definitions for the properties listed below. We
+ don't recommend overriding the definitions of other properties.
+
+ The following two properties should be set before you try to use the
+ projects with NetBeans or ant:
+
+ * bootstrap.jdk
+ Default: None. Please set this, normally in
+ $HOME/.openjdk/build.properties.
+
+ * jtreg.home
+ Default: None. Please set this, normally in
+ $HOME/.openjdk/build.properties.
+
+ These options are for configuring the behavior of make:
+
+ * use.make
+ Default: Not set. Set this, normally in ${basedir}/build.properties,
+ for a project which is make-based.
+
+ * make
+ Default: The right make for the platform, at the normal location, set
+ in *install-dir*/jdk/make/netbeans/common/make.xml
+
+ * make.options
+ Default: Empty string. Set this to any options you want to pass to
+ make, normally in ${basedir}/build.properties.
+
+ The remaining options are for use at your discretion:
+
+ * javac.options
+ Default: -Xlint
+
+ * javac.debug
+ Default: true
+
+ * javac.debuglevel
+ Default: lines,vars,source
+
+ * javadoc.options
+ Default: Empty string. Some projects will need to set this to
+ increase the heap for running javadoc. For example, see the jconsole
+ project.
+
+ * javadoc.packagenames
+ Default: "none". Set this only if your project has packages that
+ should be javadoc'd which are outside of those listed in the javadoc
+ target's packageset. See the jconsole project for an example.
+
+ * jtreg.tests
+ Default: None. Set this to a list of tests and/or directories
+ containing regression tests, normally in
+ ${basedir}/build.properties.
+
+ * jtreg.options
+ Default: Empty string. See http://openjdk.java.net/jtreg
+
+ * jtreg.vm.options
+ Default: Empty string. See http://openjdk.java.net/jtreg
+
+ * jtreg.samevm
+ Default: false. See http://openjdk.java.net/jtreg
+
+ User-overridable Targets
+ The following targets are provided for your convenience in customizing
+ various standard actions of the build process. The default action for
+ each one is to do nothing.
+
+ These come in pairs, allowing your scripts to take some action before or
+ after a standard action.
+
+ * -pre-init
+ Runs before any other initialization has been done.
+
+ * -post-init
+ Runs before after all other initialization has been done.
+
+ * -pre-compile
+ Runs before compilation, whether via ant or make. Note that in the
+ case of make, it is before the -build-make target has run, not after
+ each individual make-run has run.
+
+ * -post-compile
+ Runs after compilation, whether via ant or make.
+
+ * -pre-jtreg
+ Runs before regression tests are run.
+
+ * -post-jtreg
+ Runs before after regression tests are run.
+
+ In a make-based project, you should override these targets to do the
+ build and clean actions required of your project.
+
+ * -build-make
+ * -clean-make
+
+Known Issues
+ Tests won't run: waiting for lock
+ Occasionally when running tests, there will be a delay, followed by a
+ message like this:
+ Waiting to lock test result cache for
+ /tmp/jdk/build/linux-i586/jtreg/jconsole/JTwork for 20 seconds
+ The workaround is to stop the tests, rm -rf the offending jtreg/<project>
+ directory by hand, and re-run the tests.
+
+ Can't run nor debug a single test in the JConsole test
+ In most projects, you can run a single test by opening it in the editor,
+ and choosing Run File from the context menu. If you try this with the a
+ JConsole test, instead you'll see that *all* tests from *all* projects
+ are run. The workaround is to not try to run a single JConsole test.
+ Debugging is similarly problematic (both running and debugging use the
+ same underlying infrastructure).
+
+ If you do Run File a JConsole tests, you can always stop them by pressing
+ the stop button in the NetBeans output window. But you'll be surprised to
+ learn that they are actually still running in the background. The only
+ way out of this situation is to exit NetBeans. A few more tests will run,
+ but after restarting NetBeans things will be OK.
+
+Attribution
+ UNIX is a registered trademark in the United States and other countries,
+ exclusively licensed through X/Open Company, Ltd.
+