--- a/hotspot/src/share/vm/opto/loopTransform.cpp Wed May 04 03:42:58 2011 -0700
+++ b/hotspot/src/share/vm/opto/loopTransform.cpp Wed May 04 13:12:42 2011 -0700
@@ -83,7 +83,7 @@
#ifdef ASSERT
BoolTest::mask bt = cl->loopexit()->test_trip();
assert(bt == BoolTest::lt || bt == BoolTest::gt ||
- bt == BoolTest::ne, "canonical test is expected");
+ (bt == BoolTest::ne && !LoopLimitCheck), "canonical test is expected");
#endif
Node* init_n = cl->init_trip();
@@ -510,7 +510,7 @@
// the pre-loop with only 1 user (the new peeled iteration), but the
// peeled-loop backedge has 2 users.
Node* new_exit_value = old_new[head->in(LoopNode::LoopBackControl)->_idx];
- new_exit_value = move_loop_predicates(entry, new_exit_value);
+ new_exit_value = move_loop_predicates(entry, new_exit_value, !counted_loop);
_igvn.hash_delete(head);
head->set_req(LoopNode::EntryControl, new_exit_value);
for (DUIterator_Fast jmax, j = head->fast_outs(jmax); j < jmax; j++) {
@@ -593,6 +593,12 @@
return false;
}
+ // Fully unroll a loop with few iterations regardless next
+ // conditions since following loop optimizations will split
+ // such loop anyway (pre-main-post).
+ if (trip_count <= 3)
+ return true;
+
// Take into account that after unroll conjoined heads and tails will fold,
// otherwise policy_unroll() may allow more unrolling than max unrolling.
uint new_body_size = EMPTY_LOOP_SIZE + (body_size - EMPTY_LOOP_SIZE) * trip_count;
@@ -605,15 +611,6 @@
return false;
}
- // Currently we don't have policy to optimize one iteration loops.
- // Maximally unrolling transformation is used for that:
- // it is peeled and the original loop become non reachable (dead).
- // Also fully unroll a loop with few iterations regardless next
- // conditions since following loop optimizations will split
- // such loop anyway (pre-main-post).
- if (trip_count <= 3)
- return true;
-
// Do not unroll a loop with String intrinsics code.
// String intrinsics are large and have loops.
for (uint k = 0; k < _body.size(); k++) {
@@ -645,8 +642,9 @@
if (!cl->is_valid_counted_loop())
return false; // Malformed counted loop
- // protect against over-unrolling
- if (cl->trip_count() <= 1) return false;
+ // Protect against over-unrolling.
+ // After split at least one iteration will be executed in pre-loop.
+ if (cl->trip_count() <= (uint)(cl->is_normal_loop() ? 2 : 1)) return false;
int future_unroll_ct = cl->unrolled_count() * 2;
if (future_unroll_ct > MAX_UNROLL) return false;
@@ -678,6 +676,7 @@
Node *init_n = cl->init_trip();
Node *limit_n = cl->limit();
+ int stride_con = cl->stride_con();
// Non-constant bounds.
// Protect against over-unrolling when init or/and limit are not constant
// (so that trip_count's init value is maxint) but iv range is known.
@@ -687,7 +686,7 @@
if (phi != NULL) {
assert(phi->is_Phi() && phi->in(0) == _head, "Counted loop should have iv phi.");
const TypeInt* iv_type = phase->_igvn.type(phi)->is_int();
- int next_stride = cl->stride_con() * 2; // stride after this unroll
+ int next_stride = stride_con * 2; // stride after this unroll
if (next_stride > 0) {
if (iv_type->_lo + next_stride <= iv_type->_lo || // overflow
iv_type->_lo + next_stride > iv_type->_hi) {
@@ -702,15 +701,19 @@
}
}
+ // After unroll limit will be adjusted: new_limit = limit-stride.
+ // Bailout if adjustment overflow.
+ const TypeInt* limit_type = phase->_igvn.type(limit_n)->is_int();
+ if (stride_con > 0 && ((limit_type->_hi - stride_con) >= limit_type->_hi) ||
+ stride_con < 0 && ((limit_type->_lo - stride_con) <= limit_type->_lo))
+ return false; // overflow
+
// Adjust body_size to determine if we unroll or not
uint body_size = _body.size();
- // Key test to unroll CaffeineMark's Logic test
- int xors_in_loop = 0;
// Also count ModL, DivL and MulL which expand mightly
for (uint k = 0; k < _body.size(); k++) {
Node* n = _body.at(k);
switch (n->Opcode()) {
- case Op_XorI: xors_in_loop++; break; // CaffeineMark's Logic test
case Op_ModL: body_size += 30; break;
case Op_DivL: body_size += 30; break;
case Op_MulL: body_size += 10; break;
@@ -727,8 +730,7 @@
// Check for being too big
if (body_size > (uint)LoopUnrollLimit) {
- if (xors_in_loop >= 4 && body_size < (uint)LoopUnrollLimit*4) return true;
- // Normal case: loop too big
+ // Normal case: loop too big
return false;
}
@@ -750,28 +752,31 @@
// Return TRUE or FALSE if the loop should be range-check-eliminated.
// Actually we do iteration-splitting, a more powerful form of RCE.
bool IdealLoopTree::policy_range_check( PhaseIdealLoop *phase ) const {
- if( !RangeCheckElimination ) return false;
+ if (!RangeCheckElimination) return false;
CountedLoopNode *cl = _head->as_CountedLoop();
// If we unrolled with no intention of doing RCE and we later
// changed our minds, we got no pre-loop. Either we need to
// make a new pre-loop, or we gotta disallow RCE.
- if( cl->is_main_no_pre_loop() ) return false; // Disallowed for now.
+ if (cl->is_main_no_pre_loop()) return false; // Disallowed for now.
Node *trip_counter = cl->phi();
// Check loop body for tests of trip-counter plus loop-invariant vs
// loop-invariant.
- for( uint i = 0; i < _body.size(); i++ ) {
+ for (uint i = 0; i < _body.size(); i++) {
Node *iff = _body[i];
- if( iff->Opcode() == Op_If ) { // Test?
+ if (iff->Opcode() == Op_If) { // Test?
// Comparing trip+off vs limit
Node *bol = iff->in(1);
- if( bol->req() != 2 ) continue; // dead constant test
+ if (bol->req() != 2) continue; // dead constant test
if (!bol->is_Bool()) {
assert(UseLoopPredicate && bol->Opcode() == Op_Conv2B, "predicate check only");
continue;
}
+ if (bol->as_Bool()->_test._test == BoolTest::ne)
+ continue; // not RC
+
Node *cmp = bol->in(1);
Node *rc_exp = cmp->in(1);
@@ -1067,6 +1072,7 @@
// negative stride use >
if (pre_end->in(CountedLoopEndNode::TestValue)->as_Bool()->_test._test == BoolTest::ne) {
+ assert(!LoopLimitCheck, "only canonical tests (lt or gt) are expected");
BoolTest::mask new_test = (main_end->stride_con() > 0) ? BoolTest::lt : BoolTest::gt;
// Modify pre loop end condition
@@ -1093,6 +1099,9 @@
main_head->set_main_loop();
if( peel_only ) main_head->set_main_no_pre_loop();
+ // Subtract a trip count for the pre-loop.
+ main_head->set_trip_count(main_head->trip_count() - 1);
+
// It's difficult to be precise about the trip-counts
// for the pre/post loops. They are usually very short,
// so guess that 4 trips is a reasonable value.
@@ -1126,9 +1135,9 @@
loop->dump_head();
} else if (TraceLoopOpts) {
if (loop_head->trip_count() < (uint)LoopUnrollLimit) {
- tty->print("Unroll %d(%2d) ", loop_head->unrolled_count()*2, loop_head->trip_count());
+ tty->print("Unroll %d(%2d) ", loop_head->unrolled_count()*2, loop_head->trip_count());
} else {
- tty->print("Unroll %d ", loop_head->unrolled_count()*2);
+ tty->print("Unroll %d ", loop_head->unrolled_count()*2);
}
loop->dump_head();
}
@@ -1144,7 +1153,8 @@
Node *stride = loop_head->stride();
Node *opaq = NULL;
- if( adjust_min_trip ) { // If not maximally unrolling, need adjustment
+ if (adjust_min_trip) { // If not maximally unrolling, need adjustment
+ // Search for zero-trip guard.
assert( loop_head->is_main_loop(), "" );
assert( ctrl->Opcode() == Op_IfTrue || ctrl->Opcode() == Op_IfFalse, "" );
Node *iff = ctrl->in(0);
@@ -1154,63 +1164,202 @@
Node *cmp = bol->in(1);
assert( cmp->Opcode() == Op_CmpI, "" );
opaq = cmp->in(2);
- // Occasionally it's possible for a pre-loop Opaque1 node to be
+ // Occasionally it's possible for a zero-trip guard Opaque1 node to be
// optimized away and then another round of loop opts attempted.
// We can not optimize this particular loop in that case.
- if( opaq->Opcode() != Op_Opaque1 )
- return; // Cannot find pre-loop! Bail out!
+ if (opaq->Opcode() != Op_Opaque1)
+ return; // Cannot find zero-trip guard! Bail out!
+ // Zero-trip test uses an 'opaque' node which is not shared.
+ assert(opaq->outcnt() == 1 && opaq->in(1) == limit, "");
}
C->set_major_progress();
- // Adjust max trip count. The trip count is intentionally rounded
- // down here (e.g. 15-> 7-> 3-> 1) because if we unwittingly over-unroll,
- // the main, unrolled, part of the loop will never execute as it is protected
- // by the min-trip test. See bug 4834191 for a case where we over-unrolled
- // and later determined that part of the unrolled loop was dead.
- loop_head->set_trip_count(loop_head->trip_count() / 2);
+ Node* new_limit = NULL;
+ if (UnrollLimitCheck) {
+ int stride_con = stride->get_int();
+ int stride_p = (stride_con > 0) ? stride_con : -stride_con;
+ uint old_trip_count = loop_head->trip_count();
+ // Verify that unroll policy result is still valid.
+ assert(old_trip_count > 1 &&
+ (!adjust_min_trip || stride_p <= (1<<3)*loop_head->unrolled_count()), "sanity");
- // Double the count of original iterations in the unrolled loop body.
- loop_head->double_unrolled_count();
+ // Adjust loop limit to keep valid iterations number after unroll.
+ // Use (limit - stride) instead of (((limit - init)/stride) & (-2))*stride
+ // which may overflow.
+ if (!adjust_min_trip) {
+ assert(old_trip_count > 1 && (old_trip_count & 1) == 0,
+ "odd trip count for maximally unroll");
+ // Don't need to adjust limit for maximally unroll since trip count is even.
+ } else if (loop_head->has_exact_trip_count() && init->is_Con()) {
+ // Loop's limit is constant. Loop's init could be constant when pre-loop
+ // become peeled iteration.
+ long init_con = init->get_int();
+ // We can keep old loop limit if iterations count stays the same:
+ // old_trip_count == new_trip_count * 2
+ // Note: since old_trip_count >= 2 then new_trip_count >= 1
+ // so we also don't need to adjust zero trip test.
+ long limit_con = limit->get_int();
+ // (stride_con*2) not overflow since stride_con <= 8.
+ int new_stride_con = stride_con * 2;
+ int stride_m = new_stride_con - (stride_con > 0 ? 1 : -1);
+ long trip_count = (limit_con - init_con + stride_m)/new_stride_con;
+ // New trip count should satisfy next conditions.
+ assert(trip_count > 0 && (julong)trip_count < (julong)max_juint/2, "sanity");
+ uint new_trip_count = (uint)trip_count;
+ adjust_min_trip = (old_trip_count != new_trip_count*2);
+ }
+
+ if (adjust_min_trip) {
+ // Step 2: Adjust the trip limit if it is called for.
+ // The adjustment amount is -stride. Need to make sure if the
+ // adjustment underflows or overflows, then the main loop is skipped.
+ Node* cmp = loop_end->cmp_node();
+ assert(cmp->in(2) == limit, "sanity");
+ assert(opaq != NULL && opaq->in(1) == limit, "sanity");
+
+ // Verify that policy_unroll result is still valid.
+ const TypeInt* limit_type = _igvn.type(limit)->is_int();
+ assert(stride_con > 0 && ((limit_type->_hi - stride_con) < limit_type->_hi) ||
+ stride_con < 0 && ((limit_type->_lo - stride_con) > limit_type->_lo), "sanity");
- // -----------
- // Step 2: Cut back the trip counter for an unroll amount of 2.
- // Loop will normally trip (limit - init)/stride_con. Since it's a
- // CountedLoop this is exact (stride divides limit-init exactly).
- // We are going to double the loop body, so we want to knock off any
- // odd iteration: (trip_cnt & ~1). Then back compute a new limit.
- Node *span = new (C, 3) SubINode( limit, init );
- register_new_node( span, ctrl );
- Node *trip = new (C, 3) DivINode( 0, span, stride );
- register_new_node( trip, ctrl );
- Node *mtwo = _igvn.intcon(-2);
- set_ctrl(mtwo, C->root());
- Node *rond = new (C, 3) AndINode( trip, mtwo );
- register_new_node( rond, ctrl );
- Node *spn2 = new (C, 3) MulINode( rond, stride );
- register_new_node( spn2, ctrl );
- Node *lim2 = new (C, 3) AddINode( spn2, init );
- register_new_node( lim2, ctrl );
+ if (limit->is_Con()) {
+ // The check in policy_unroll and the assert above guarantee
+ // no underflow if limit is constant.
+ new_limit = _igvn.intcon(limit->get_int() - stride_con);
+ set_ctrl(new_limit, C->root());
+ } else {
+ if (stride_con > 0 && ((limit_type->_lo - stride_con) < limit_type->_lo) ||
+ stride_con < 0 && ((limit_type->_hi - stride_con) > limit_type->_hi)) {
+ // No underflow.
+ new_limit = new (C, 3) SubINode(limit, stride);
+ } else {
+ // (limit - stride) may underflow.
+ // Clamp the adjustment value with MININT or MAXINT:
+ //
+ // new_limit = limit-stride
+ // if (stride > 0)
+ // new_limit = (limit < new_limit) ? MININT : new_limit;
+ // else
+ // new_limit = (limit > new_limit) ? MAXINT : new_limit;
+ //
+ BoolTest::mask bt = loop_end->test_trip();
+ assert(bt == BoolTest::lt || bt == BoolTest::gt, "canonical test is expected");
+ Node* adj_max = _igvn.intcon((stride_con > 0) ? min_jint : max_jint);
+ set_ctrl(adj_max, C->root());
+ Node* old_limit = NULL;
+ Node* adj_limit = NULL;
+ Node* bol = limit->is_CMove() ? limit->in(CMoveNode::Condition) : NULL;
+ if (loop_head->unrolled_count() > 1 &&
+ limit->is_CMove() && limit->Opcode() == Op_CMoveI &&
+ limit->in(CMoveNode::IfTrue) == adj_max &&
+ bol->as_Bool()->_test._test == bt &&
+ bol->in(1)->Opcode() == Op_CmpI &&
+ bol->in(1)->in(2) == limit->in(CMoveNode::IfFalse)) {
+ // Loop was unrolled before.
+ // Optimize the limit to avoid nested CMove:
+ // use original limit as old limit.
+ old_limit = bol->in(1)->in(1);
+ // Adjust previous adjusted limit.
+ adj_limit = limit->in(CMoveNode::IfFalse);
+ adj_limit = new (C, 3) SubINode(adj_limit, stride);
+ } else {
+ old_limit = limit;
+ adj_limit = new (C, 3) SubINode(limit, stride);
+ }
+ assert(old_limit != NULL && adj_limit != NULL, "");
+ register_new_node( adj_limit, ctrl ); // adjust amount
+ Node* adj_cmp = new (C, 3) CmpINode(old_limit, adj_limit);
+ register_new_node( adj_cmp, ctrl );
+ Node* adj_bool = new (C, 2) BoolNode(adj_cmp, bt);
+ register_new_node( adj_bool, ctrl );
+ new_limit = new (C, 4) CMoveINode(adj_bool, adj_limit, adj_max, TypeInt::INT);
+ }
+ register_new_node(new_limit, ctrl);
+ }
+ assert(new_limit != NULL, "");
+ if (limit->outcnt() == 2) {
+ // Replace old limit if it is used only in loop tests.
+ _igvn.replace_node(limit, new_limit);
+ } else {
+ // Replace in loop test.
+ _igvn.hash_delete(cmp);
+ cmp->set_req(2, new_limit);
+
+ // Step 3: Find the min-trip test guaranteed before a 'main' loop.
+ // Make it a 1-trip test (means at least 2 trips).
- // Hammer in the new limit
- Node *ctrl2 = loop_end->in(0);
- Node *cmp2 = new (C, 3) CmpINode( loop_head->incr(), lim2 );
- register_new_node( cmp2, ctrl2 );
- Node *bol2 = new (C, 2) BoolNode( cmp2, loop_end->test_trip() );
- register_new_node( bol2, ctrl2 );
- _igvn.hash_delete(loop_end);
- loop_end->set_req(CountedLoopEndNode::TestValue, bol2);
+ // Guard test uses an 'opaque' node which is not shared. Hence I
+ // can edit it's inputs directly. Hammer in the new limit for the
+ // minimum-trip guard.
+ assert(opaq->outcnt() == 1, "");
+ _igvn.hash_delete(opaq);
+ opaq->set_req(1, new_limit);
+ }
+ }
+
+ // Adjust max trip count. The trip count is intentionally rounded
+ // down here (e.g. 15-> 7-> 3-> 1) because if we unwittingly over-unroll,
+ // the main, unrolled, part of the loop will never execute as it is protected
+ // by the min-trip test. See bug 4834191 for a case where we over-unrolled
+ // and later determined that part of the unrolled loop was dead.
+ loop_head->set_trip_count(old_trip_count / 2);
+
+ // Double the count of original iterations in the unrolled loop body.
+ loop_head->double_unrolled_count();
+
+ } else { // LoopLimitCheck
+
+ // Adjust max trip count. The trip count is intentionally rounded
+ // down here (e.g. 15-> 7-> 3-> 1) because if we unwittingly over-unroll,
+ // the main, unrolled, part of the loop will never execute as it is protected
+ // by the min-trip test. See bug 4834191 for a case where we over-unrolled
+ // and later determined that part of the unrolled loop was dead.
+ loop_head->set_trip_count(loop_head->trip_count() / 2);
+
+ // Double the count of original iterations in the unrolled loop body.
+ loop_head->double_unrolled_count();
- // Step 3: Find the min-trip test guaranteed before a 'main' loop.
- // Make it a 1-trip test (means at least 2 trips).
- if( adjust_min_trip ) {
- // Guard test uses an 'opaque' node which is not shared. Hence I
- // can edit it's inputs directly. Hammer in the new limit for the
- // minimum-trip guard.
- assert( opaq->outcnt() == 1, "" );
- _igvn.hash_delete(opaq);
- opaq->set_req(1, lim2);
- }
+ // -----------
+ // Step 2: Cut back the trip counter for an unroll amount of 2.
+ // Loop will normally trip (limit - init)/stride_con. Since it's a
+ // CountedLoop this is exact (stride divides limit-init exactly).
+ // We are going to double the loop body, so we want to knock off any
+ // odd iteration: (trip_cnt & ~1). Then back compute a new limit.
+ Node *span = new (C, 3) SubINode( limit, init );
+ register_new_node( span, ctrl );
+ Node *trip = new (C, 3) DivINode( 0, span, stride );
+ register_new_node( trip, ctrl );
+ Node *mtwo = _igvn.intcon(-2);
+ set_ctrl(mtwo, C->root());
+ Node *rond = new (C, 3) AndINode( trip, mtwo );
+ register_new_node( rond, ctrl );
+ Node *spn2 = new (C, 3) MulINode( rond, stride );
+ register_new_node( spn2, ctrl );
+ new_limit = new (C, 3) AddINode( spn2, init );
+ register_new_node( new_limit, ctrl );
+
+ // Hammer in the new limit
+ Node *ctrl2 = loop_end->in(0);
+ Node *cmp2 = new (C, 3) CmpINode( loop_head->incr(), new_limit );
+ register_new_node( cmp2, ctrl2 );
+ Node *bol2 = new (C, 2) BoolNode( cmp2, loop_end->test_trip() );
+ register_new_node( bol2, ctrl2 );
+ _igvn.hash_delete(loop_end);
+ loop_end->set_req(CountedLoopEndNode::TestValue, bol2);
+
+ // Step 3: Find the min-trip test guaranteed before a 'main' loop.
+ // Make it a 1-trip test (means at least 2 trips).
+ if( adjust_min_trip ) {
+ assert( new_limit != NULL, "" );
+ // Guard test uses an 'opaque' node which is not shared. Hence I
+ // can edit it's inputs directly. Hammer in the new limit for the
+ // minimum-trip guard.
+ assert( opaq->outcnt() == 1, "" );
+ _igvn.hash_delete(opaq);
+ opaq->set_req(1, new_limit);
+ }
+ } // LoopLimitCheck
// ---------
// Step 4: Clone the loop body. Move it inside the loop. This loop body
@@ -1266,6 +1415,7 @@
void PhaseIdealLoop::do_maximally_unroll( IdealLoopTree *loop, Node_List &old_new ) {
CountedLoopNode *cl = loop->_head->as_CountedLoop();
+ assert(cl->has_exact_trip_count(), "trip count is not exact");
assert(cl->trip_count() > 0, "");
#ifndef PRODUCT
if (TraceLoopOpts) {
@@ -1282,6 +1432,7 @@
// Now its tripping an even number of times remaining. Double loop body.
// Do not adjust pre-guards; they are not needed and do not exist.
if (cl->trip_count() > 0) {
+ assert((cl->trip_count() & 1) == 0, "missed peeling");
do_unroll(loop, old_new, false);
}
}
@@ -1295,22 +1446,13 @@
}
//------------------------------add_constraint---------------------------------
-// Constrain the main loop iterations so the condition:
-// scale_con * I + offset < limit
+// Constrain the main loop iterations so the conditions:
+// low_limit <= scale_con * I + offset < upper_limit
// always holds true. That is, either increase the number of iterations in
// the pre-loop or the post-loop until the condition holds true in the main
// loop. Stride, scale, offset and limit are all loop invariant. Further,
// stride and scale are constants (offset and limit often are).
-void PhaseIdealLoop::add_constraint( int stride_con, int scale_con, Node *offset, Node *limit, Node *pre_ctrl, Node **pre_limit, Node **main_limit ) {
-
- // Compute "I :: (limit-offset)/scale_con"
- Node *con = new (C, 3) SubINode( limit, offset );
- register_new_node( con, pre_ctrl );
- Node *scale = _igvn.intcon(scale_con);
- set_ctrl(scale, C->root());
- Node *X = new (C, 3) DivINode( 0, con, scale );
- register_new_node( X, pre_ctrl );
-
+void PhaseIdealLoop::add_constraint( int stride_con, int scale_con, Node *offset, Node *low_limit, Node *upper_limit, Node *pre_ctrl, Node **pre_limit, Node **main_limit ) {
// For positive stride, the pre-loop limit always uses a MAX function
// and the main loop a MIN function. For negative stride these are
// reversed.
@@ -1319,48 +1461,143 @@
// pre-loop must check for underflow and the post-loop for overflow.
// Negative stride*scale reverses this; pre-loop checks for overflow and
// post-loop for underflow.
- if( stride_con*scale_con > 0 ) {
- // Compute I < (limit-offset)/scale_con
- // Adjust main-loop last iteration to be MIN/MAX(main_loop,X)
- *main_limit = (stride_con > 0)
- ? (Node*)(new (C, 3) MinINode( *main_limit, X ))
- : (Node*)(new (C, 3) MaxINode( *main_limit, X ));
- register_new_node( *main_limit, pre_ctrl );
+ if (stride_con*scale_con > 0) {
+ // The overflow limit: scale*I+offset < upper_limit
+ // For main-loop compute
+ // ( if (scale > 0) /* and stride > 0 */
+ // I < (upper_limit-offset)/scale
+ // else /* scale < 0 and stride < 0 */
+ // I > (upper_limit-offset)/scale
+ // )
+ //
+ // (upper_limit-offset) may overflow when offset < 0.
+ // But it is fine since main loop will either have
+ // less iterations or will be skipped in such case.
+ Node *con = new (C, 3) SubINode(upper_limit, offset);
+ register_new_node(con, pre_ctrl);
+ Node *scale = _igvn.intcon(scale_con);
+ set_ctrl(scale, C->root());
+ Node *X = new (C, 3) DivINode(0, con, scale);
+ register_new_node(X, pre_ctrl);
+
+ // Adjust main-loop last iteration
+ Node *loop_limit = *main_limit;
+ loop_limit = (stride_con > 0) // scale > 0
+ ? (Node*)(new (C, 3) MinINode(loop_limit, X))
+ : (Node*)(new (C, 3) MaxINode(loop_limit, X));
+ register_new_node(loop_limit, pre_ctrl);
+ *main_limit = loop_limit;
- } else {
- // Compute (limit-offset)/scale_con + SGN(-scale_con) <= I
- // Add the negation of the main-loop constraint to the pre-loop.
- // See footnote [++] below for a derivation of the limit expression.
- Node *incr = _igvn.intcon(scale_con > 0 ? -1 : 1);
- set_ctrl(incr, C->root());
- Node *adj = new (C, 3) AddINode( X, incr );
- register_new_node( adj, pre_ctrl );
- *pre_limit = (scale_con > 0)
- ? (Node*)new (C, 3) MinINode( *pre_limit, adj )
- : (Node*)new (C, 3) MaxINode( *pre_limit, adj );
- register_new_node( *pre_limit, pre_ctrl );
+ // The underflow limit: low_limit <= scale*I+offset.
+ // For pre-loop compute
+ // NOT(scale*I+offset >= low_limit)
+ // scale*I+offset < low_limit
+ // ( if (scale > 0) /* and stride > 0 */
+ // I < (low_limit-offset)/scale
+ // else /* scale < 0 and stride < 0 */
+ // I > (low_limit-offset)/scale
+ // )
+
+ if (low_limit->get_int() == -max_jint) {
+ if (!RangeLimitCheck) return;
+ // We need this guard when scale*pre_limit+offset >= limit
+ // due to underflow so we need execute pre-loop until
+ // scale*I+offset >= min_int. But (low_limit-offset) will
+ // underflow when offset > 0 and X will be > original_limit.
+ // To avoid it we replace offset = offset > 0 ? 0 : offset
+ // and add min(pre_limit, original_limit).
+ Node* shift = _igvn.intcon(31);
+ set_ctrl(shift, C->root());
+ Node *neg_off = new (C, 3) RShiftINode(offset, shift);
+ register_new_node(neg_off, pre_ctrl);
+ offset = new (C, 3) AndINode(offset, neg_off);
+ register_new_node(offset, pre_ctrl);
+ } else {
+ assert(low_limit->get_int() == 0, "wrong low limit for range check");
+ // The only problem we have here when offset == min_int
+ // since (0-min_int) == min_int. It may be fine for scale > 0
+ // but for scale < 0 X will be < original_limit.
+ }
+ con = new (C, 3) SubINode(low_limit, offset);
+ register_new_node(con, pre_ctrl);
+ scale = _igvn.intcon(scale_con);
+ set_ctrl(scale, C->root());
+ X = new (C, 3) DivINode(0, con, scale);
+ register_new_node(X, pre_ctrl);
-// [++] Here's the algebra that justifies the pre-loop limit expression:
-//
-// NOT( scale_con * I + offset < limit )
-// ==
-// scale_con * I + offset >= limit
-// ==
-// SGN(scale_con) * I >= (limit-offset)/|scale_con|
-// ==
-// (limit-offset)/|scale_con| <= I * SGN(scale_con)
-// ==
-// (limit-offset)/|scale_con|-1 < I * SGN(scale_con)
-// ==
-// ( if (scale_con > 0) /*common case*/
-// (limit-offset)/scale_con - 1 < I
-// else
-// (limit-offset)/scale_con + 1 > I
-// )
-// ( if (scale_con > 0) /*common case*/
-// (limit-offset)/scale_con + SGN(-scale_con) < I
-// else
-// (limit-offset)/scale_con + SGN(-scale_con) > I
+ // Adjust pre-loop last iteration
+ loop_limit = *pre_limit;
+ loop_limit = (stride_con > 0) // scale > 0
+ ? (Node*)(new (C, 3) MaxINode(loop_limit, X))
+ : (Node*)(new (C, 3) MinINode(loop_limit, X));
+ register_new_node( loop_limit, pre_ctrl );
+ *pre_limit = loop_limit;
+
+ } else { // stride_con*scale_con < 0
+ // For negative stride*scale pre-loop checks for overflow and
+ // post-loop for underflow.
+ //
+ // The underflow limit: low_limit <= scale*I+offset.
+ // For main-loop compute
+ // scale*I+offset+1 > low_limit
+ // ( if (scale < 0) /* and stride > 0 */
+ // I < (low_limit-(offset+1))/scale
+ // else /* scale < 0 and stride < 0 */
+ // I > (low_limit-(offset+1))/scale
+ // )
+
+ if (low_limit->get_int() == -max_jint) {
+ if (!RangeLimitCheck) return;
+ } else {
+ assert(low_limit->get_int() == 0, "wrong low limit for range check");
+ }
+
+ Node *one = _igvn.intcon(1);
+ set_ctrl(one, C->root());
+ Node *plus_one = new (C, 3) AddINode(offset, one);
+ register_new_node( plus_one, pre_ctrl );
+ Node *con = new (C, 3) SubINode(low_limit, plus_one);
+ register_new_node(con, pre_ctrl);
+ Node *scale = _igvn.intcon(scale_con);
+ set_ctrl(scale, C->root());
+ Node *X = new (C, 3) DivINode(0, con, scale);
+ register_new_node(X, pre_ctrl);
+
+ // Adjust main-loop last iteration
+ Node *loop_limit = *main_limit;
+ loop_limit = (stride_con > 0) // scale < 0
+ ? (Node*)(new (C, 3) MinINode(loop_limit, X))
+ : (Node*)(new (C, 3) MaxINode(loop_limit, X));
+ register_new_node(loop_limit, pre_ctrl);
+ *main_limit = loop_limit;
+
+ // The overflow limit: scale*I+offset < upper_limit
+ // For pre-loop compute
+ // NOT(scale*I+offset < upper_limit)
+ // scale*I+offset >= upper_limit
+ // scale*I+offset+1 > upper_limit
+ // ( if (scale < 0) /* and stride > 0 */
+ // I < (upper_limit-(offset+1))/scale
+ // else /* scale < 0 and stride < 0 */
+ // I > (upper_limit-(offset+1))/scale
+ // )
+ plus_one = new (C, 3) AddINode(offset, one);
+ register_new_node( plus_one, pre_ctrl );
+ con = new (C, 3) SubINode(upper_limit, plus_one);
+ register_new_node(con, pre_ctrl);
+ scale = _igvn.intcon(scale_con);
+ set_ctrl(scale, C->root());
+ X = new (C, 3) DivINode(0, con, scale);
+ register_new_node(X, pre_ctrl);
+
+ // Adjust pre-loop last iteration
+ loop_limit = *pre_limit;
+ loop_limit = (stride_con > 0) // scale < 0
+ ? (Node*)(new (C, 3) MaxINode(loop_limit, X))
+ : (Node*)(new (C, 3) MinINode(loop_limit, X));
+ register_new_node( loop_limit, pre_ctrl );
+ *pre_limit = loop_limit;
+
}
}
@@ -1491,7 +1728,7 @@
Node *cmpzm = bolzm->in(1);
assert(cmpzm->is_Cmp(), "");
Node *opqzm = cmpzm->in(2);
- // Can not optimize a loop if pre-loop Opaque1 node is optimized
+ // Can not optimize a loop if zero-trip Opaque1 node is optimized
// away and then another round of loop opts attempted.
if (opqzm->Opcode() != Op_Opaque1)
return;
@@ -1526,8 +1763,11 @@
int stride_con = cl->stride_con();
Node *zero = _igvn.intcon(0);
Node *one = _igvn.intcon(1);
+ // Use symmetrical int range [-max_jint,max_jint]
+ Node *mini = _igvn.intcon(-max_jint);
set_ctrl(zero, C->root());
set_ctrl(one, C->root());
+ set_ctrl(mini, C->root());
// Range checks that do not dominate the loop backedge (ie.
// conditionally executed) can lengthen the pre loop limit beyond
@@ -1602,7 +1842,12 @@
if( offset_c == ctrl ) {
continue; // Don't rce this check but continue looking for other candidates.
}
-
+#ifdef ASSERT
+ if (TraceRangeLimitCheck) {
+ tty->print_cr("RC bool node%s", flip ? " flipped:" : ":");
+ bol->dump(2);
+ }
+#endif
// At this point we have the expression as:
// scale_con * trip_counter + offset :: limit
// where scale_con, offset and limit are loop invariant. Trip_counter
@@ -1613,17 +1858,16 @@
// Adjust pre and main loop limits to guard the correct iteration set
if( cmp->Opcode() == Op_CmpU ) {// Unsigned compare is really 2 tests
if( b_test._test == BoolTest::lt ) { // Range checks always use lt
- // The overflow limit: scale*I+offset < limit
- add_constraint( stride_con, scale_con, offset, limit, pre_ctrl, &pre_limit, &main_limit );
- // The underflow limit: 0 <= scale*I+offset.
- // Some math yields: -scale*I-(offset+1) < 0
- Node *plus_one = new (C, 3) AddINode( offset, one );
- register_new_node( plus_one, pre_ctrl );
- Node *neg_offset = new (C, 3) SubINode( zero, plus_one );
- register_new_node( neg_offset, pre_ctrl );
- add_constraint( stride_con, -scale_con, neg_offset, zero, pre_ctrl, &pre_limit, &main_limit );
+ // The underflow and overflow limits: 0 <= scale*I+offset < limit
+ add_constraint( stride_con, scale_con, offset, zero, limit, pre_ctrl, &pre_limit, &main_limit );
if (!conditional_rc) {
conditional_rc = !loop->dominates_backedge(iff);
+ // It is also needed if offset->_lo == min_int since
+ // (0-min_int) == min_int. It may be fine for stride > 0
+ // but for stride < 0 pre_limit will be < original_limit.
+ const TypeInt* offset_t = _igvn.type(offset)->is_int();
+ conditional_rc |= RangeLimitCheck && (offset_t->_lo == min_jint) &&
+ (scale_con<0) && (stride_con<0);
}
} else {
#ifndef PRODUCT
@@ -1634,21 +1878,35 @@
}
} else { // Otherwise work on normal compares
switch( b_test._test ) {
- case BoolTest::ge: // Convert X >= Y to -X <= -Y
+ case BoolTest::gt:
+ // Fall into GE case
+ case BoolTest::ge:
+ // Convert (I*scale+offset) >= Limit to (I*(-scale)+(-offset)) <= -Limit
scale_con = -scale_con;
offset = new (C, 3) SubINode( zero, offset );
register_new_node( offset, pre_ctrl );
limit = new (C, 3) SubINode( zero, limit );
register_new_node( limit, pre_ctrl );
// Fall into LE case
- case BoolTest::le: // Convert X <= Y to X < Y+1
- limit = new (C, 3) AddINode( limit, one );
- register_new_node( limit, pre_ctrl );
+ case BoolTest::le:
+ if (b_test._test != BoolTest::gt) {
+ // Convert X <= Y to X < Y+1
+ limit = new (C, 3) AddINode( limit, one );
+ register_new_node( limit, pre_ctrl );
+ }
// Fall into LT case
case BoolTest::lt:
- add_constraint( stride_con, scale_con, offset, limit, pre_ctrl, &pre_limit, &main_limit );
+ // The underflow and overflow limits: MIN_INT <= scale*I+offset < limit
+ add_constraint( stride_con, scale_con, offset, mini, limit, pre_ctrl, &pre_limit, &main_limit );
if (!conditional_rc) {
conditional_rc = !loop->dominates_backedge(iff);
+ // It is also needed if scale*pre_limit+offset >= limit
+ // due to underflow so we need execute pre-loop until
+ // scale*I+offset >= min_int. But (low_limit-offset) will
+ // underflow when offset > 0 and X will be > original_limit.
+ const TypeInt* offset_t = _igvn.type(offset)->is_int();
+ conditional_rc |= RangeLimitCheck && (offset_t->_hi > 0) &&
+ (scale_con>0) && (stride_con>0);
}
break;
default:
@@ -1699,7 +1957,8 @@
// Note:: we are making the main loop limit no longer precise;
// need to round up based on stride.
- if( stride_con != 1 && stride_con != -1 ) { // Cutout for common case
+ cl->set_nonexact_trip_count();
+ if (!LoopLimitCheck && stride_con != 1 && stride_con != -1) { // Cutout for common case
// "Standard" round-up logic: ([main_limit-init+(y-1)]/y)*y+init
// Hopefully, compiler will optimize for powers of 2.
Node *ctrl = get_ctrl(main_limit);
@@ -1879,7 +2138,19 @@
// iteration. Then the CountedLoopEnd will collapse (backedge never
// taken) and all loop-invariant uses of the exit values will be correct.
Node *phi = cl->phi();
- Node *final = new (phase->C, 3) SubINode( cl->limit(), cl->stride() );
+ Node *exact_limit = phase->exact_limit(this);
+ if (exact_limit != cl->limit()) {
+ // We also need to replace the original limit to collapse loop exit.
+ Node* cmp = cl->loopexit()->cmp_node();
+ assert(cl->limit() == cmp->in(2), "sanity");
+ phase->_igvn._worklist.push(cmp->in(2)); // put limit on worklist
+ phase->_igvn.hash_delete(cmp);
+ cmp->set_req(2, exact_limit);
+ phase->_igvn._worklist.push(cmp); // put cmp on worklist
+ }
+ // Note: the final value after increment should not overflow since
+ // counted loop has limit check predicate.
+ Node *final = new (phase->C, 3) SubINode( exact_limit, cl->stride() );
phase->register_new_node(final,cl->in(LoopNode::EntryControl));
phase->_igvn.replace_node(phi,final);
phase->C->set_major_progress();