--- a/jdk/makefiles/com/sun/crypto/provider/Makefile Wed Jul 05 18:14:56 2017 +0200
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,275 +0,0 @@
-#
-# Copyright (c) 2007, 2011, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-#
-# Makefile for building sunjce_provider.jar.
-#
-# This file was derived from make/javax/crypto/Makefile.
-#
-
-#
-# (The terms "OpenJDK" and "JDK" below refer to OpenJDK and Sun JDK builds
-# respectively.)
-#
-# JCE builds are very different between OpenJDK and JDK. The OpenJDK JCE
-# jar files do not require signing, but those for JDK do. If an unsigned
-# jar file is installed into JDK, things will break when the crypto
-# routines are called.
-#
-# This Makefile does the "real" build of the JCE files. There are some
-# javac options currently specific to JCE, so we recompile now to make
-# sure any implicit compilations didn't use any incorrect flags.
-#
-# For OpenJDK, the jar files built here are installed directly into the
-# OpenJDK.
-#
-# For JDK, the binaries use pre-built/pre-signed binary files stored in
-# the closed workspace that are not shipped in the OpenJDK workspaces.
-# We still build the JDK files here to verify the files compile, and in
-# preparation for possible signing. Developers working on JCE in JDK
-# must sign the JCE files before testing. The JCE signing key is kept
-# separate from the JDK workspace to prevent its disclosure.
-#
-# SPECIAL NOTE TO JCE/JDK developers: The source files must eventually
-# be built and signed, and the resulting jar files MUST BE CHECKED INTO
-# THE CLOSED PART OF THE WORKSPACE*. This separate step *MUST NOT BE
-# FORGOTTEN*, otherwise a bug fixed in the source code will not be
-# reflected in the shipped binaries. The "release" target should be
-# used to generate the required files.
-#
-# There are a number of targets to help both JDK/OpenJDK developers.
-#
-# Main Targets (JDK/OPENJDK):
-#
-# all/clobber/clean The usual.
-# If OpenJDK, installs sunjce_provider.jar.
-# If JDK, installs prebuilt
-# sunjce_provider.jar.
-#
-# jar Builds/installs sunjce_provider.jar
-# If OpenJDK, does not sign.
-# If JDK, tries to sign.
-#
-# Other lesser-used Targets (JDK/OPENJDK):
-#
-# build-jar Builds sunjce_provider.jar
-# (does not sign/install)
-#
-# install-jar Alias for "jar" above.
-#
-# Other targets (JDK only):
-#
-# sign Alias for sign-jar
-# sign-jar Builds/signs sunjce_provider.jar (no install)
-#
-# release Builds all targets in preparation
-# for workspace integration.
-#
-# install-prebuilt Installs the pre-built jar files
-#
-# This makefile was written to support parallel target execution.
-#
-
-BUILDDIR = ../../../..
-PACKAGE = com.sun.crypto.provider
-PRODUCT = sun
-
-#
-# The following is for when we need to do postprocessing
-# (signing) against a read-only build. If the OUTPUTDIR
-# isn't writable, the build currently crashes out.
-#
-ifndef OPENJDK
- ifdef ALT_JCE_BUILD_DIR
- # =====================================================
- # Where to place the output, in case we're building from a read-only
- # build area. (e.g. a release engineering build.)
- JCE_BUILD_DIR=${ALT_JCE_BUILD_DIR}
- IGNORE_WRITABLE_OUTPUTDIR_TEST=true
- else
- JCE_BUILD_DIR=${TEMPDIR}
- endif
-endif
-
-JAVAC_MAX_WARNINGS = false
-JAVAC_LINT_OPTIONS = -Xlint:all,-deprecation
-JAVAC_WARNINGS_FATAL = true
-include $(BUILDDIR)/common/Defs.gmk
-
-#
-# Location for the newly built classfiles.
-#
-CLASSDESTDIR = $(TEMPDIR)/classes
-
-#
-# Subdirectories of these are automatically included.
-#
-AUTO_FILES_JAVA_DIRS = \
- com/sun/crypto/provider
-
-include $(BUILDDIR)/common/Classes.gmk
-
-#
-# Rules
-#
-
-#
-# Some licensees do not get the security sources, but we still need to
-# be able to build "all" for them. Check here to see if the sources were
-# available. If not, then we don't need to continue this rule.
-#
-
-ifdef OPENJDK
-all: build-jar install-jar
-else # OPENJDK
-ifeq ($(strip $(FILES_java)),)
-all: install-prebuilt
- $(no-source-warning)
-else # FILES_java available
-all: build-jar install-prebuilt
- $(build-warning)
-endif # $(FILES_java) available
-endif # OPENJDK
-
-#
-# We use a variety of subdirectories in the $(TEMPDIR) depending on what
-# part of the build we're doing. Both OPENJDK/JDK builds are initially
-# done in the unsigned area. When files are signed in JDK, they will be
-# placed in the appropriate areas.
-#
-UNSIGNED_DIR = $(TEMPDIR)/unsigned
-
-include $(BUILDDIR)/javax/crypto/Defs-jce.gmk
-
-
-# =====================================================
-# Build the unsigned sunjce_provider.jar file.
-#
-
-JAR_DESTFILE = $(EXTDIR)/sunjce_provider.jar
-
-#
-# The sunjce_provider.jar needs to be in the extension class directory,
-# therefore none of its classes should appear in $(CLASSBINDIR).
-# Currently no one is using any of the SunJCE internals, so these files
-# should not have been built.
-#
-
-#
-# Since the -C option to jar is used below, each directory entry must be
-# preceded with the appropriate directory to "cd" into.
-#
-JAR_DIRS = $(patsubst %, -C $(CLASSDESTDIR) %, $(AUTO_FILES_JAVA_DIRS))
-
-build-jar: $(UNSIGNED_DIR)/sunjce_provider.jar
-
-#
-# Build sunjce_provider.jar.
-#
-$(UNSIGNED_DIR)/sunjce_provider.jar: build $(JCE_MANIFEST_FILE)
- $(prep-target)
- $(BOOT_JAR_CMD) cmf $(JCE_MANIFEST_FILE) $@ $(JAR_DIRS) \
- $(BOOT_JAR_JFLAGS)
- @$(java-vm-cleanup)
-
-
-ifndef OPENJDK
-# =====================================================
-# Sign the provider jar file. Not needed for OpenJDK.
-#
-
-SIGNED_DIR = $(JCE_BUILD_DIR)/signed
-
-sign: sign-jar
-
-sign-jar: $(SIGNED_DIR)/sunjce_provider.jar
-
-ifndef ALT_JCE_BUILD_DIR
-$(SIGNED_DIR)/sunjce_provider.jar: $(UNSIGNED_DIR)/sunjce_provider.jar
-else
-#
-# We have to remove the build dependency, otherwise, we'll try to rebuild it
-# which we can't do on a read-only filesystem.
-#
-$(SIGNED_DIR)/sunjce_provider.jar:
- @if [ ! -r $(UNSIGNED_DIR)/sunjce_provider.jar ] ; then \
- $(ECHO) "Couldn't find $(UNSIGNED_DIR)/sunjce_provider.jar"; \
- exit 1; \
- fi
-endif
- $(call sign-file, $(UNSIGNED_DIR)/sunjce_provider.jar)
-
-
-# =====================================================
-# Create the Release Engineering files. Signed builds, etc.
-#
-
-release: $(SIGNED_DIR)/sunjce_provider.jar
- $(RM) $(JCE_BUILD_DIR)/release/sunjce_provider.jar
- $(MKDIR) -p $(JCE_BUILD_DIR)/release
- $(CP) $(SIGNED_DIR)/sunjce_provider.jar $(JCE_BUILD_DIR)/release
- $(release-warning)
-
-endif # OPENJDK
-
-
-# =====================================================
-# Install routines.
-#
-
-#
-# Install sunjce_provider.jar, depending on which type is requested.
-#
-install-jar jar: $(JAR_DESTFILE)
-ifndef OPENJDK
- $(release-warning)
-endif
-
-ifdef OPENJDK
-$(JAR_DESTFILE): $(UNSIGNED_DIR)/sunjce_provider.jar
-else
-$(JAR_DESTFILE): $(SIGNED_DIR)/sunjce_provider.jar
-endif
- $(install-file)
-
-ifndef OPENJDK
-install-prebuilt:
- @$(ECHO) "\n>>>Installing prebuilt SunJCE provider..."
- $(RM) $(JAR_DESTFILE)
- $(CP) $(PREBUILT_DIR)/jce/sunjce_provider.jar $(JAR_DESTFILE)
-endif
-
-
-# =====================================================
-# Support routines.
-#
-
-clobber clean::
- $(RM) -r $(JAR_DESTFILE) $(TEMPDIR) $(JCE_BUILD_DIR)
-
-.PHONY: build-jar jar install-jar
-ifndef OPENJDK
-.PHONY: sign sign-jar release install-prebuilt
-endif