--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/src/cpu/x86/vm/sharedRuntime_x86_32.cpp Sat Dec 01 00:00:00 2007 +0000
@@ -0,0 +1,2633 @@
+/*
+ * Copyright 2003-2007 Sun Microsystems, Inc. All Rights Reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
+ * CA 95054 USA or visit www.sun.com if you need additional information or
+ * have any questions.
+ *
+ */
+
+#include "incls/_precompiled.incl"
+#include "incls/_sharedRuntime_x86_32.cpp.incl"
+
+#define __ masm->
+#ifdef COMPILER2
+UncommonTrapBlob *SharedRuntime::_uncommon_trap_blob;
+#endif // COMPILER2
+
+DeoptimizationBlob *SharedRuntime::_deopt_blob;
+SafepointBlob *SharedRuntime::_polling_page_safepoint_handler_blob;
+SafepointBlob *SharedRuntime::_polling_page_return_handler_blob;
+RuntimeStub* SharedRuntime::_wrong_method_blob;
+RuntimeStub* SharedRuntime::_ic_miss_blob;
+RuntimeStub* SharedRuntime::_resolve_opt_virtual_call_blob;
+RuntimeStub* SharedRuntime::_resolve_virtual_call_blob;
+RuntimeStub* SharedRuntime::_resolve_static_call_blob;
+
+class RegisterSaver {
+ enum { FPU_regs_live = 8 /*for the FPU stack*/+8/*eight more for XMM registers*/ };
+ // Capture info about frame layout
+ enum layout {
+ fpu_state_off = 0,
+ fpu_state_end = fpu_state_off+FPUStateSizeInWords-1,
+ st0_off, st0H_off,
+ st1_off, st1H_off,
+ st2_off, st2H_off,
+ st3_off, st3H_off,
+ st4_off, st4H_off,
+ st5_off, st5H_off,
+ st6_off, st6H_off,
+ st7_off, st7H_off,
+
+ xmm0_off, xmm0H_off,
+ xmm1_off, xmm1H_off,
+ xmm2_off, xmm2H_off,
+ xmm3_off, xmm3H_off,
+ xmm4_off, xmm4H_off,
+ xmm5_off, xmm5H_off,
+ xmm6_off, xmm6H_off,
+ xmm7_off, xmm7H_off,
+ flags_off,
+ rdi_off,
+ rsi_off,
+ ignore_off, // extra copy of rbp,
+ rsp_off,
+ rbx_off,
+ rdx_off,
+ rcx_off,
+ rax_off,
+ // The frame sender code expects that rbp will be in the "natural" place and
+ // will override any oopMap setting for it. We must therefore force the layout
+ // so that it agrees with the frame sender code.
+ rbp_off,
+ return_off, // slot for return address
+ reg_save_size };
+
+
+ public:
+
+ static OopMap* save_live_registers(MacroAssembler* masm, int additional_frame_words,
+ int* total_frame_words, bool verify_fpu = true);
+ static void restore_live_registers(MacroAssembler* masm);
+
+ static int rax_offset() { return rax_off; }
+ static int rbx_offset() { return rbx_off; }
+
+ // Offsets into the register save area
+ // Used by deoptimization when it is managing result register
+ // values on its own
+
+ static int raxOffset(void) { return rax_off; }
+ static int rdxOffset(void) { return rdx_off; }
+ static int rbxOffset(void) { return rbx_off; }
+ static int xmm0Offset(void) { return xmm0_off; }
+ // This really returns a slot in the fp save area, which one is not important
+ static int fpResultOffset(void) { return st0_off; }
+
+ // During deoptimization only the result register need to be restored
+ // all the other values have already been extracted.
+
+ static void restore_result_registers(MacroAssembler* masm);
+
+};
+
+OopMap* RegisterSaver::save_live_registers(MacroAssembler* masm, int additional_frame_words,
+ int* total_frame_words, bool verify_fpu) {
+
+ int frame_size_in_bytes = (reg_save_size + additional_frame_words) * wordSize;
+ int frame_words = frame_size_in_bytes / wordSize;
+ *total_frame_words = frame_words;
+
+ assert(FPUStateSizeInWords == 27, "update stack layout");
+
+ // save registers, fpu state, and flags
+ // We assume caller has already has return address slot on the stack
+ // We push epb twice in this sequence because we want the real rbp,
+ // to be under the return like a normal enter and we want to use pushad
+ // We push by hand instead of pusing push
+ __ enter();
+ __ pushad();
+ __ pushfd();
+ __ subl(rsp,FPU_regs_live*sizeof(jdouble)); // Push FPU registers space
+ __ push_FPU_state(); // Save FPU state & init
+
+ if (verify_fpu) {
+ // Some stubs may have non standard FPU control word settings so
+ // only check and reset the value when it required to be the
+ // standard value. The safepoint blob in particular can be used
+ // in methods which are using the 24 bit control word for
+ // optimized float math.
+
+#ifdef ASSERT
+ // Make sure the control word has the expected value
+ Label ok;
+ __ cmpw(Address(rsp, 0), StubRoutines::fpu_cntrl_wrd_std());
+ __ jccb(Assembler::equal, ok);
+ __ stop("corrupted control word detected");
+ __ bind(ok);
+#endif
+
+ // Reset the control word to guard against exceptions being unmasked
+ // since fstp_d can cause FPU stack underflow exceptions. Write it
+ // into the on stack copy and then reload that to make sure that the
+ // current and future values are correct.
+ __ movw(Address(rsp, 0), StubRoutines::fpu_cntrl_wrd_std());
+ }
+
+ __ frstor(Address(rsp, 0));
+ if (!verify_fpu) {
+ // Set the control word so that exceptions are masked for the
+ // following code.
+ __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
+ }
+
+ // Save the FPU registers in de-opt-able form
+
+ __ fstp_d(Address(rsp, st0_off*wordSize)); // st(0)
+ __ fstp_d(Address(rsp, st1_off*wordSize)); // st(1)
+ __ fstp_d(Address(rsp, st2_off*wordSize)); // st(2)
+ __ fstp_d(Address(rsp, st3_off*wordSize)); // st(3)
+ __ fstp_d(Address(rsp, st4_off*wordSize)); // st(4)
+ __ fstp_d(Address(rsp, st5_off*wordSize)); // st(5)
+ __ fstp_d(Address(rsp, st6_off*wordSize)); // st(6)
+ __ fstp_d(Address(rsp, st7_off*wordSize)); // st(7)
+
+ if( UseSSE == 1 ) { // Save the XMM state
+ __ movflt(Address(rsp,xmm0_off*wordSize),xmm0);
+ __ movflt(Address(rsp,xmm1_off*wordSize),xmm1);
+ __ movflt(Address(rsp,xmm2_off*wordSize),xmm2);
+ __ movflt(Address(rsp,xmm3_off*wordSize),xmm3);
+ __ movflt(Address(rsp,xmm4_off*wordSize),xmm4);
+ __ movflt(Address(rsp,xmm5_off*wordSize),xmm5);
+ __ movflt(Address(rsp,xmm6_off*wordSize),xmm6);
+ __ movflt(Address(rsp,xmm7_off*wordSize),xmm7);
+ } else if( UseSSE >= 2 ) {
+ __ movdbl(Address(rsp,xmm0_off*wordSize),xmm0);
+ __ movdbl(Address(rsp,xmm1_off*wordSize),xmm1);
+ __ movdbl(Address(rsp,xmm2_off*wordSize),xmm2);
+ __ movdbl(Address(rsp,xmm3_off*wordSize),xmm3);
+ __ movdbl(Address(rsp,xmm4_off*wordSize),xmm4);
+ __ movdbl(Address(rsp,xmm5_off*wordSize),xmm5);
+ __ movdbl(Address(rsp,xmm6_off*wordSize),xmm6);
+ __ movdbl(Address(rsp,xmm7_off*wordSize),xmm7);
+ }
+
+ // Set an oopmap for the call site. This oopmap will map all
+ // oop-registers and debug-info registers as callee-saved. This
+ // will allow deoptimization at this safepoint to find all possible
+ // debug-info recordings, as well as let GC find all oops.
+
+ OopMapSet *oop_maps = new OopMapSet();
+ OopMap* map = new OopMap( frame_words, 0 );
+
+#define STACK_OFFSET(x) VMRegImpl::stack2reg((x) + additional_frame_words)
+
+ map->set_callee_saved(STACK_OFFSET( rax_off), rax->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET( rcx_off), rcx->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET( rdx_off), rdx->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET( rbx_off), rbx->as_VMReg());
+ // rbp, location is known implicitly, no oopMap
+ map->set_callee_saved(STACK_OFFSET( rsi_off), rsi->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET( rdi_off), rdi->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(st0_off), as_FloatRegister(0)->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(st1_off), as_FloatRegister(1)->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(st2_off), as_FloatRegister(2)->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(st3_off), as_FloatRegister(3)->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(st4_off), as_FloatRegister(4)->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(st5_off), as_FloatRegister(5)->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(st6_off), as_FloatRegister(6)->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(st7_off), as_FloatRegister(7)->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(xmm0_off), xmm0->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(xmm1_off), xmm1->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(xmm2_off), xmm2->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(xmm3_off), xmm3->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(xmm4_off), xmm4->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(xmm5_off), xmm5->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(xmm6_off), xmm6->as_VMReg());
+ map->set_callee_saved(STACK_OFFSET(xmm7_off), xmm7->as_VMReg());
+ // %%% This is really a waste but we'll keep things as they were for now
+ if (true) {
+#define NEXTREG(x) (x)->as_VMReg()->next()
+ map->set_callee_saved(STACK_OFFSET(st0H_off), NEXTREG(as_FloatRegister(0)));
+ map->set_callee_saved(STACK_OFFSET(st1H_off), NEXTREG(as_FloatRegister(1)));
+ map->set_callee_saved(STACK_OFFSET(st2H_off), NEXTREG(as_FloatRegister(2)));
+ map->set_callee_saved(STACK_OFFSET(st3H_off), NEXTREG(as_FloatRegister(3)));
+ map->set_callee_saved(STACK_OFFSET(st4H_off), NEXTREG(as_FloatRegister(4)));
+ map->set_callee_saved(STACK_OFFSET(st5H_off), NEXTREG(as_FloatRegister(5)));
+ map->set_callee_saved(STACK_OFFSET(st6H_off), NEXTREG(as_FloatRegister(6)));
+ map->set_callee_saved(STACK_OFFSET(st7H_off), NEXTREG(as_FloatRegister(7)));
+ map->set_callee_saved(STACK_OFFSET(xmm0H_off), NEXTREG(xmm0));
+ map->set_callee_saved(STACK_OFFSET(xmm1H_off), NEXTREG(xmm1));
+ map->set_callee_saved(STACK_OFFSET(xmm2H_off), NEXTREG(xmm2));
+ map->set_callee_saved(STACK_OFFSET(xmm3H_off), NEXTREG(xmm3));
+ map->set_callee_saved(STACK_OFFSET(xmm4H_off), NEXTREG(xmm4));
+ map->set_callee_saved(STACK_OFFSET(xmm5H_off), NEXTREG(xmm5));
+ map->set_callee_saved(STACK_OFFSET(xmm6H_off), NEXTREG(xmm6));
+ map->set_callee_saved(STACK_OFFSET(xmm7H_off), NEXTREG(xmm7));
+#undef NEXTREG
+#undef STACK_OFFSET
+ }
+
+ return map;
+
+}
+
+void RegisterSaver::restore_live_registers(MacroAssembler* masm) {
+
+ // Recover XMM & FPU state
+ if( UseSSE == 1 ) {
+ __ movflt(xmm0,Address(rsp,xmm0_off*wordSize));
+ __ movflt(xmm1,Address(rsp,xmm1_off*wordSize));
+ __ movflt(xmm2,Address(rsp,xmm2_off*wordSize));
+ __ movflt(xmm3,Address(rsp,xmm3_off*wordSize));
+ __ movflt(xmm4,Address(rsp,xmm4_off*wordSize));
+ __ movflt(xmm5,Address(rsp,xmm5_off*wordSize));
+ __ movflt(xmm6,Address(rsp,xmm6_off*wordSize));
+ __ movflt(xmm7,Address(rsp,xmm7_off*wordSize));
+ } else if( UseSSE >= 2 ) {
+ __ movdbl(xmm0,Address(rsp,xmm0_off*wordSize));
+ __ movdbl(xmm1,Address(rsp,xmm1_off*wordSize));
+ __ movdbl(xmm2,Address(rsp,xmm2_off*wordSize));
+ __ movdbl(xmm3,Address(rsp,xmm3_off*wordSize));
+ __ movdbl(xmm4,Address(rsp,xmm4_off*wordSize));
+ __ movdbl(xmm5,Address(rsp,xmm5_off*wordSize));
+ __ movdbl(xmm6,Address(rsp,xmm6_off*wordSize));
+ __ movdbl(xmm7,Address(rsp,xmm7_off*wordSize));
+ }
+ __ pop_FPU_state();
+ __ addl(rsp,FPU_regs_live*sizeof(jdouble)); // Pop FPU registers
+
+ __ popfd();
+ __ popad();
+ // Get the rbp, described implicitly by the frame sender code (no oopMap)
+ __ popl(rbp);
+
+}
+
+void RegisterSaver::restore_result_registers(MacroAssembler* masm) {
+
+ // Just restore result register. Only used by deoptimization. By
+ // now any callee save register that needs to be restore to a c2
+ // caller of the deoptee has been extracted into the vframeArray
+ // and will be stuffed into the c2i adapter we create for later
+ // restoration so only result registers need to be restored here.
+ //
+
+ __ frstor(Address(rsp, 0)); // Restore fpu state
+
+ // Recover XMM & FPU state
+ if( UseSSE == 1 ) {
+ __ movflt(xmm0, Address(rsp, xmm0_off*wordSize));
+ } else if( UseSSE >= 2 ) {
+ __ movdbl(xmm0, Address(rsp, xmm0_off*wordSize));
+ }
+ __ movl(rax, Address(rsp, rax_off*wordSize));
+ __ movl(rdx, Address(rsp, rdx_off*wordSize));
+ // Pop all of the register save are off the stack except the return address
+ __ addl(rsp, return_off * wordSize);
+}
+
+// The java_calling_convention describes stack locations as ideal slots on
+// a frame with no abi restrictions. Since we must observe abi restrictions
+// (like the placement of the register window) the slots must be biased by
+// the following value.
+static int reg2offset_in(VMReg r) {
+ // Account for saved rbp, and return address
+ // This should really be in_preserve_stack_slots
+ return (r->reg2stack() + 2) * VMRegImpl::stack_slot_size;
+}
+
+static int reg2offset_out(VMReg r) {
+ return (r->reg2stack() + SharedRuntime::out_preserve_stack_slots()) * VMRegImpl::stack_slot_size;
+}
+
+// ---------------------------------------------------------------------------
+// Read the array of BasicTypes from a signature, and compute where the
+// arguments should go. Values in the VMRegPair regs array refer to 4-byte
+// quantities. Values less than SharedInfo::stack0 are registers, those above
+// refer to 4-byte stack slots. All stack slots are based off of the stack pointer
+// as framesizes are fixed.
+// VMRegImpl::stack0 refers to the first slot 0(sp).
+// and VMRegImpl::stack0+1 refers to the memory word 4-byes higher. Register
+// up to RegisterImpl::number_of_registers) are the 32-bit
+// integer registers.
+
+// Pass first two oop/int args in registers ECX and EDX.
+// Pass first two float/double args in registers XMM0 and XMM1.
+// Doubles have precedence, so if you pass a mix of floats and doubles
+// the doubles will grab the registers before the floats will.
+
+// Note: the INPUTS in sig_bt are in units of Java argument words, which are
+// either 32-bit or 64-bit depending on the build. The OUTPUTS are in 32-bit
+// units regardless of build. Of course for i486 there is no 64 bit build
+
+
+// ---------------------------------------------------------------------------
+// The compiled Java calling convention.
+// Pass first two oop/int args in registers ECX and EDX.
+// Pass first two float/double args in registers XMM0 and XMM1.
+// Doubles have precedence, so if you pass a mix of floats and doubles
+// the doubles will grab the registers before the floats will.
+int SharedRuntime::java_calling_convention(const BasicType *sig_bt,
+ VMRegPair *regs,
+ int total_args_passed,
+ int is_outgoing) {
+ uint stack = 0; // Starting stack position for args on stack
+
+
+ // Pass first two oop/int args in registers ECX and EDX.
+ uint reg_arg0 = 9999;
+ uint reg_arg1 = 9999;
+
+ // Pass first two float/double args in registers XMM0 and XMM1.
+ // Doubles have precedence, so if you pass a mix of floats and doubles
+ // the doubles will grab the registers before the floats will.
+ // CNC - TURNED OFF FOR non-SSE.
+ // On Intel we have to round all doubles (and most floats) at
+ // call sites by storing to the stack in any case.
+ // UseSSE=0 ==> Don't Use ==> 9999+0
+ // UseSSE=1 ==> Floats only ==> 9999+1
+ // UseSSE>=2 ==> Floats or doubles ==> 9999+2
+ enum { fltarg_dontuse = 9999+0, fltarg_float_only = 9999+1, fltarg_flt_dbl = 9999+2 };
+ uint fargs = (UseSSE>=2) ? 2 : UseSSE;
+ uint freg_arg0 = 9999+fargs;
+ uint freg_arg1 = 9999+fargs;
+
+ // Pass doubles & longs aligned on the stack. First count stack slots for doubles
+ int i;
+ for( i = 0; i < total_args_passed; i++) {
+ if( sig_bt[i] == T_DOUBLE ) {
+ // first 2 doubles go in registers
+ if( freg_arg0 == fltarg_flt_dbl ) freg_arg0 = i;
+ else if( freg_arg1 == fltarg_flt_dbl ) freg_arg1 = i;
+ else // Else double is passed low on the stack to be aligned.
+ stack += 2;
+ } else if( sig_bt[i] == T_LONG ) {
+ stack += 2;
+ }
+ }
+ int dstack = 0; // Separate counter for placing doubles
+
+ // Now pick where all else goes.
+ for( i = 0; i < total_args_passed; i++) {
+ // From the type and the argument number (count) compute the location
+ switch( sig_bt[i] ) {
+ case T_SHORT:
+ case T_CHAR:
+ case T_BYTE:
+ case T_BOOLEAN:
+ case T_INT:
+ case T_ARRAY:
+ case T_OBJECT:
+ case T_ADDRESS:
+ if( reg_arg0 == 9999 ) {
+ reg_arg0 = i;
+ regs[i].set1(rcx->as_VMReg());
+ } else if( reg_arg1 == 9999 ) {
+ reg_arg1 = i;
+ regs[i].set1(rdx->as_VMReg());
+ } else {
+ regs[i].set1(VMRegImpl::stack2reg(stack++));
+ }
+ break;
+ case T_FLOAT:
+ if( freg_arg0 == fltarg_flt_dbl || freg_arg0 == fltarg_float_only ) {
+ freg_arg0 = i;
+ regs[i].set1(xmm0->as_VMReg());
+ } else if( freg_arg1 == fltarg_flt_dbl || freg_arg1 == fltarg_float_only ) {
+ freg_arg1 = i;
+ regs[i].set1(xmm1->as_VMReg());
+ } else {
+ regs[i].set1(VMRegImpl::stack2reg(stack++));
+ }
+ break;
+ case T_LONG:
+ assert(sig_bt[i+1] == T_VOID, "missing Half" );
+ regs[i].set2(VMRegImpl::stack2reg(dstack));
+ dstack += 2;
+ break;
+ case T_DOUBLE:
+ assert(sig_bt[i+1] == T_VOID, "missing Half" );
+ if( freg_arg0 == (uint)i ) {
+ regs[i].set2(xmm0->as_VMReg());
+ } else if( freg_arg1 == (uint)i ) {
+ regs[i].set2(xmm1->as_VMReg());
+ } else {
+ regs[i].set2(VMRegImpl::stack2reg(dstack));
+ dstack += 2;
+ }
+ break;
+ case T_VOID: regs[i].set_bad(); break;
+ break;
+ default:
+ ShouldNotReachHere();
+ break;
+ }
+ }
+
+ // return value can be odd number of VMRegImpl stack slots make multiple of 2
+ return round_to(stack, 2);
+}
+
+// Patch the callers callsite with entry to compiled code if it exists.
+static void patch_callers_callsite(MacroAssembler *masm) {
+ Label L;
+ __ verify_oop(rbx);
+ __ cmpl(Address(rbx, in_bytes(methodOopDesc::code_offset())), NULL_WORD);
+ __ jcc(Assembler::equal, L);
+ // Schedule the branch target address early.
+ // Call into the VM to patch the caller, then jump to compiled callee
+ // rax, isn't live so capture return address while we easily can
+ __ movl(rax, Address(rsp, 0));
+ __ pushad();
+ __ pushfd();
+
+ if (UseSSE == 1) {
+ __ subl(rsp, 2*wordSize);
+ __ movflt(Address(rsp, 0), xmm0);
+ __ movflt(Address(rsp, wordSize), xmm1);
+ }
+ if (UseSSE >= 2) {
+ __ subl(rsp, 4*wordSize);
+ __ movdbl(Address(rsp, 0), xmm0);
+ __ movdbl(Address(rsp, 2*wordSize), xmm1);
+ }
+#ifdef COMPILER2
+ // C2 may leave the stack dirty if not in SSE2+ mode
+ if (UseSSE >= 2) {
+ __ verify_FPU(0, "c2i transition should have clean FPU stack");
+ } else {
+ __ empty_FPU_stack();
+ }
+#endif /* COMPILER2 */
+
+ // VM needs caller's callsite
+ __ pushl(rax);
+ // VM needs target method
+ __ pushl(rbx);
+ __ verify_oop(rbx);
+ __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::fixup_callers_callsite)));
+ __ addl(rsp, 2*wordSize);
+
+ if (UseSSE == 1) {
+ __ movflt(xmm0, Address(rsp, 0));
+ __ movflt(xmm1, Address(rsp, wordSize));
+ __ addl(rsp, 2*wordSize);
+ }
+ if (UseSSE >= 2) {
+ __ movdbl(xmm0, Address(rsp, 0));
+ __ movdbl(xmm1, Address(rsp, 2*wordSize));
+ __ addl(rsp, 4*wordSize);
+ }
+
+ __ popfd();
+ __ popad();
+ __ bind(L);
+}
+
+
+// Helper function to put tags in interpreter stack.
+static void tag_stack(MacroAssembler *masm, const BasicType sig, int st_off) {
+ if (TaggedStackInterpreter) {
+ int tag_offset = st_off + Interpreter::expr_tag_offset_in_bytes(0);
+ if (sig == T_OBJECT || sig == T_ARRAY) {
+ __ movl(Address(rsp, tag_offset), frame::TagReference);
+ } else if (sig == T_LONG || sig == T_DOUBLE) {
+ int next_tag_offset = st_off + Interpreter::expr_tag_offset_in_bytes(1);
+ __ movl(Address(rsp, next_tag_offset), frame::TagValue);
+ __ movl(Address(rsp, tag_offset), frame::TagValue);
+ } else {
+ __ movl(Address(rsp, tag_offset), frame::TagValue);
+ }
+ }
+}
+
+// Double and long values with Tagged stacks are not contiguous.
+static void move_c2i_double(MacroAssembler *masm, XMMRegister r, int st_off) {
+ int next_off = st_off - Interpreter::stackElementSize();
+ if (TaggedStackInterpreter) {
+ __ movdbl(Address(rsp, next_off), r);
+ // Move top half up and put tag in the middle.
+ __ movl(rdi, Address(rsp, next_off+wordSize));
+ __ movl(Address(rsp, st_off), rdi);
+ tag_stack(masm, T_DOUBLE, next_off);
+ } else {
+ __ movdbl(Address(rsp, next_off), r);
+ }
+}
+
+static void gen_c2i_adapter(MacroAssembler *masm,
+ int total_args_passed,
+ int comp_args_on_stack,
+ const BasicType *sig_bt,
+ const VMRegPair *regs,
+ Label& skip_fixup) {
+ // Before we get into the guts of the C2I adapter, see if we should be here
+ // at all. We've come from compiled code and are attempting to jump to the
+ // interpreter, which means the caller made a static call to get here
+ // (vcalls always get a compiled target if there is one). Check for a
+ // compiled target. If there is one, we need to patch the caller's call.
+ patch_callers_callsite(masm);
+
+ __ bind(skip_fixup);
+
+#ifdef COMPILER2
+ // C2 may leave the stack dirty if not in SSE2+ mode
+ if (UseSSE >= 2) {
+ __ verify_FPU(0, "c2i transition should have clean FPU stack");
+ } else {
+ __ empty_FPU_stack();
+ }
+#endif /* COMPILER2 */
+
+ // Since all args are passed on the stack, total_args_passed * interpreter_
+ // stack_element_size is the
+ // space we need.
+ int extraspace = total_args_passed * Interpreter::stackElementSize();
+
+ // Get return address
+ __ popl(rax);
+
+ // set senderSP value
+ __ movl(rsi, rsp);
+
+ __ subl(rsp, extraspace);
+
+ // Now write the args into the outgoing interpreter space
+ for (int i = 0; i < total_args_passed; i++) {
+ if (sig_bt[i] == T_VOID) {
+ assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");
+ continue;
+ }
+
+ // st_off points to lowest address on stack.
+ int st_off = ((total_args_passed - 1) - i) * Interpreter::stackElementSize();
+ // Say 4 args:
+ // i st_off
+ // 0 12 T_LONG
+ // 1 8 T_VOID
+ // 2 4 T_OBJECT
+ // 3 0 T_BOOL
+ VMReg r_1 = regs[i].first();
+ VMReg r_2 = regs[i].second();
+ if (!r_1->is_valid()) {
+ assert(!r_2->is_valid(), "");
+ continue;
+ }
+
+ if (r_1->is_stack()) {
+ // memory to memory use fpu stack top
+ int ld_off = r_1->reg2stack() * VMRegImpl::stack_slot_size + extraspace;
+
+ if (!r_2->is_valid()) {
+ __ movl(rdi, Address(rsp, ld_off));
+ __ movl(Address(rsp, st_off), rdi);
+ tag_stack(masm, sig_bt[i], st_off);
+ } else {
+
+ // ld_off == LSW, ld_off+VMRegImpl::stack_slot_size == MSW
+ // st_off == MSW, st_off-wordSize == LSW
+
+ int next_off = st_off - Interpreter::stackElementSize();
+ __ movl(rdi, Address(rsp, ld_off));
+ __ movl(Address(rsp, next_off), rdi);
+ __ movl(rdi, Address(rsp, ld_off + wordSize));
+ __ movl(Address(rsp, st_off), rdi);
+ tag_stack(masm, sig_bt[i], next_off);
+ }
+ } else if (r_1->is_Register()) {
+ Register r = r_1->as_Register();
+ if (!r_2->is_valid()) {
+ __ movl(Address(rsp, st_off), r);
+ tag_stack(masm, sig_bt[i], st_off);
+ } else {
+ // long/double in gpr
+ ShouldNotReachHere();
+ }
+ } else {
+ assert(r_1->is_XMMRegister(), "");
+ if (!r_2->is_valid()) {
+ __ movflt(Address(rsp, st_off), r_1->as_XMMRegister());
+ tag_stack(masm, sig_bt[i], st_off);
+ } else {
+ assert(sig_bt[i] == T_DOUBLE || sig_bt[i] == T_LONG, "wrong type");
+ move_c2i_double(masm, r_1->as_XMMRegister(), st_off);
+ }
+ }
+ }
+
+ // Schedule the branch target address early.
+ __ movl(rcx, Address(rbx, in_bytes(methodOopDesc::interpreter_entry_offset())));
+ // And repush original return address
+ __ pushl(rax);
+ __ jmp(rcx);
+}
+
+
+// For tagged stacks, double or long value aren't contiguous on the stack
+// so get them contiguous for the xmm load
+static void move_i2c_double(MacroAssembler *masm, XMMRegister r, Register saved_sp, int ld_off) {
+ int next_val_off = ld_off - Interpreter::stackElementSize();
+ if (TaggedStackInterpreter) {
+ // use tag slot temporarily for MSW
+ __ movl(rsi, Address(saved_sp, ld_off));
+ __ movl(Address(saved_sp, next_val_off+wordSize), rsi);
+ __ movdbl(r, Address(saved_sp, next_val_off));
+ // restore tag
+ __ movl(Address(saved_sp, next_val_off+wordSize), frame::TagValue);
+ } else {
+ __ movdbl(r, Address(saved_sp, next_val_off));
+ }
+}
+
+static void gen_i2c_adapter(MacroAssembler *masm,
+ int total_args_passed,
+ int comp_args_on_stack,
+ const BasicType *sig_bt,
+ const VMRegPair *regs) {
+ // we're being called from the interpreter but need to find the
+ // compiled return entry point. The return address on the stack
+ // should point at it and we just need to pull the old value out.
+ // load up the pointer to the compiled return entry point and
+ // rewrite our return pc. The code is arranged like so:
+ //
+ // .word Interpreter::return_sentinel
+ // .word address_of_compiled_return_point
+ // return_entry_point: blah_blah_blah
+ //
+ // So we can find the appropriate return point by loading up the word
+ // just prior to the current return address we have on the stack.
+ //
+ // We will only enter here from an interpreted frame and never from after
+ // passing thru a c2i. Azul allowed this but we do not. If we lose the
+ // race and use a c2i we will remain interpreted for the race loser(s).
+ // This removes all sorts of headaches on the x86 side and also eliminates
+ // the possibility of having c2i -> i2c -> c2i -> ... endless transitions.
+
+
+ // Note: rsi contains the senderSP on entry. We must preserve it since
+ // we may do a i2c -> c2i transition if we lose a race where compiled
+ // code goes non-entrant while we get args ready.
+
+ // Pick up the return address
+ __ movl(rax, Address(rsp, 0));
+
+ // If UseSSE >= 2 then no cleanup is needed on the return to the
+ // interpreter so skip fixing up the return entry point unless
+ // VerifyFPU is enabled.
+ if (UseSSE < 2 || VerifyFPU) {
+ Label skip, chk_int;
+ // If we were called from the call stub we need to do a little bit different
+ // cleanup than if the interpreter returned to the call stub.
+
+ ExternalAddress stub_return_address(StubRoutines::_call_stub_return_address);
+ __ cmp32(rax, stub_return_address.addr());
+ __ jcc(Assembler::notEqual, chk_int);
+ assert(StubRoutines::i486::get_call_stub_compiled_return() != NULL, "must be set");
+ __ lea(rax, ExternalAddress(StubRoutines::i486::get_call_stub_compiled_return()));
+ __ jmp(skip);
+
+ // It must be the interpreter since we never get here via a c2i (unlike Azul)
+
+ __ bind(chk_int);
+#ifdef ASSERT
+ {
+ Label ok;
+ __ cmpl(Address(rax, -8), Interpreter::return_sentinel);
+ __ jcc(Assembler::equal, ok);
+ __ int3();
+ __ bind(ok);
+ }
+#endif // ASSERT
+ __ movl(rax, Address(rax, -4));
+ __ bind(skip);
+ }
+
+ // rax, now contains the compiled return entry point which will do an
+ // cleanup needed for the return from compiled to interpreted.
+
+ // Must preserve original SP for loading incoming arguments because
+ // we need to align the outgoing SP for compiled code.
+ __ movl(rdi, rsp);
+
+ // Cut-out for having no stack args. Since up to 2 int/oop args are passed
+ // in registers, we will occasionally have no stack args.
+ int comp_words_on_stack = 0;
+ if (comp_args_on_stack) {
+ // Sig words on the stack are greater-than VMRegImpl::stack0. Those in
+ // registers are below. By subtracting stack0, we either get a negative
+ // number (all values in registers) or the maximum stack slot accessed.
+ // int comp_args_on_stack = VMRegImpl::reg2stack(max_arg);
+ // Convert 4-byte stack slots to words.
+ comp_words_on_stack = round_to(comp_args_on_stack*4, wordSize)>>LogBytesPerWord;
+ // Round up to miminum stack alignment, in wordSize
+ comp_words_on_stack = round_to(comp_words_on_stack, 2);
+ __ subl(rsp, comp_words_on_stack * wordSize);
+ }
+
+ // Align the outgoing SP
+ __ andl(rsp, -(StackAlignmentInBytes));
+
+ // push the return address on the stack (note that pushing, rather
+ // than storing it, yields the correct frame alignment for the callee)
+ __ pushl(rax);
+
+ // Put saved SP in another register
+ const Register saved_sp = rax;
+ __ movl(saved_sp, rdi);
+
+
+ // Will jump to the compiled code just as if compiled code was doing it.
+ // Pre-load the register-jump target early, to schedule it better.
+ __ movl(rdi, Address(rbx, in_bytes(methodOopDesc::from_compiled_offset())));
+
+ // Now generate the shuffle code. Pick up all register args and move the
+ // rest through the floating point stack top.
+ for (int i = 0; i < total_args_passed; i++) {
+ if (sig_bt[i] == T_VOID) {
+ // Longs and doubles are passed in native word order, but misaligned
+ // in the 32-bit build.
+ assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");
+ continue;
+ }
+
+ // Pick up 0, 1 or 2 words from SP+offset.
+
+ assert(!regs[i].second()->is_valid() || regs[i].first()->next() == regs[i].second(),
+ "scrambled load targets?");
+ // Load in argument order going down.
+ int ld_off = (total_args_passed - i)*Interpreter::stackElementSize() + Interpreter::value_offset_in_bytes();
+ // Point to interpreter value (vs. tag)
+ int next_off = ld_off - Interpreter::stackElementSize();
+ //
+ //
+ //
+ VMReg r_1 = regs[i].first();
+ VMReg r_2 = regs[i].second();
+ if (!r_1->is_valid()) {
+ assert(!r_2->is_valid(), "");
+ continue;
+ }
+ if (r_1->is_stack()) {
+ // Convert stack slot to an SP offset (+ wordSize to account for return address )
+ int st_off = regs[i].first()->reg2stack()*VMRegImpl::stack_slot_size + wordSize;
+
+ // We can use rsi as a temp here because compiled code doesn't need rsi as an input
+ // and if we end up going thru a c2i because of a miss a reasonable value of rsi
+ // we be generated.
+ if (!r_2->is_valid()) {
+ // __ fld_s(Address(saved_sp, ld_off));
+ // __ fstp_s(Address(rsp, st_off));
+ __ movl(rsi, Address(saved_sp, ld_off));
+ __ movl(Address(rsp, st_off), rsi);
+ } else {
+ // Interpreter local[n] == MSW, local[n+1] == LSW however locals
+ // are accessed as negative so LSW is at LOW address
+
+ // ld_off is MSW so get LSW
+ // st_off is LSW (i.e. reg.first())
+ // __ fld_d(Address(saved_sp, next_off));
+ // __ fstp_d(Address(rsp, st_off));
+ __ movl(rsi, Address(saved_sp, next_off));
+ __ movl(Address(rsp, st_off), rsi);
+ __ movl(rsi, Address(saved_sp, ld_off));
+ __ movl(Address(rsp, st_off + wordSize), rsi);
+ }
+ } else if (r_1->is_Register()) { // Register argument
+ Register r = r_1->as_Register();
+ assert(r != rax, "must be different");
+ if (r_2->is_valid()) {
+ assert(r_2->as_Register() != rax, "need another temporary register");
+ // Remember r_1 is low address (and LSB on x86)
+ // So r_2 gets loaded from high address regardless of the platform
+ __ movl(r_2->as_Register(), Address(saved_sp, ld_off));
+ __ movl(r, Address(saved_sp, next_off));
+ } else {
+ __ movl(r, Address(saved_sp, ld_off));
+ }
+ } else {
+ assert(r_1->is_XMMRegister(), "");
+ if (!r_2->is_valid()) {
+ __ movflt(r_1->as_XMMRegister(), Address(saved_sp, ld_off));
+ } else {
+ move_i2c_double(masm, r_1->as_XMMRegister(), saved_sp, ld_off);
+ }
+ }
+ }
+
+ // 6243940 We might end up in handle_wrong_method if
+ // the callee is deoptimized as we race thru here. If that
+ // happens we don't want to take a safepoint because the
+ // caller frame will look interpreted and arguments are now
+ // "compiled" so it is much better to make this transition
+ // invisible to the stack walking code. Unfortunately if
+ // we try and find the callee by normal means a safepoint
+ // is possible. So we stash the desired callee in the thread
+ // and the vm will find there should this case occur.
+
+ __ get_thread(rax);
+ __ movl(Address(rax, JavaThread::callee_target_offset()), rbx);
+
+ // move methodOop to rax, in case we end up in an c2i adapter.
+ // the c2i adapters expect methodOop in rax, (c2) because c2's
+ // resolve stubs return the result (the method) in rax,.
+ // I'd love to fix this.
+ __ movl(rax, rbx);
+
+ __ jmp(rdi);
+}
+
+// ---------------------------------------------------------------
+AdapterHandlerEntry* SharedRuntime::generate_i2c2i_adapters(MacroAssembler *masm,
+ int total_args_passed,
+ int comp_args_on_stack,
+ const BasicType *sig_bt,
+ const VMRegPair *regs) {
+ address i2c_entry = __ pc();
+
+ gen_i2c_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs);
+
+ // -------------------------------------------------------------------------
+ // Generate a C2I adapter. On entry we know rbx, holds the methodOop during calls
+ // to the interpreter. The args start out packed in the compiled layout. They
+ // need to be unpacked into the interpreter layout. This will almost always
+ // require some stack space. We grow the current (compiled) stack, then repack
+ // the args. We finally end in a jump to the generic interpreter entry point.
+ // On exit from the interpreter, the interpreter will restore our SP (lest the
+ // compiled code, which relys solely on SP and not EBP, get sick).
+
+ address c2i_unverified_entry = __ pc();
+ Label skip_fixup;
+
+ Register holder = rax;
+ Register receiver = rcx;
+ Register temp = rbx;
+
+ {
+
+ Label missed;
+
+ __ verify_oop(holder);
+ __ movl(temp, Address(receiver, oopDesc::klass_offset_in_bytes()));
+ __ verify_oop(temp);
+
+ __ cmpl(temp, Address(holder, compiledICHolderOopDesc::holder_klass_offset()));
+ __ movl(rbx, Address(holder, compiledICHolderOopDesc::holder_method_offset()));
+ __ jcc(Assembler::notEqual, missed);
+ // Method might have been compiled since the call site was patched to
+ // interpreted if that is the case treat it as a miss so we can get
+ // the call site corrected.
+ __ cmpl(Address(rbx, in_bytes(methodOopDesc::code_offset())), NULL_WORD);
+ __ jcc(Assembler::equal, skip_fixup);
+
+ __ bind(missed);
+ __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
+ }
+
+ address c2i_entry = __ pc();
+
+ gen_c2i_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs, skip_fixup);
+
+ __ flush();
+ return new AdapterHandlerEntry(i2c_entry, c2i_entry, c2i_unverified_entry);
+}
+
+int SharedRuntime::c_calling_convention(const BasicType *sig_bt,
+ VMRegPair *regs,
+ int total_args_passed) {
+// We return the amount of VMRegImpl stack slots we need to reserve for all
+// the arguments NOT counting out_preserve_stack_slots.
+
+ uint stack = 0; // All arguments on stack
+
+ for( int i = 0; i < total_args_passed; i++) {
+ // From the type and the argument number (count) compute the location
+ switch( sig_bt[i] ) {
+ case T_BOOLEAN:
+ case T_CHAR:
+ case T_FLOAT:
+ case T_BYTE:
+ case T_SHORT:
+ case T_INT:
+ case T_OBJECT:
+ case T_ARRAY:
+ case T_ADDRESS:
+ regs[i].set1(VMRegImpl::stack2reg(stack++));
+ break;
+ case T_LONG:
+ case T_DOUBLE: // The stack numbering is reversed from Java
+ // Since C arguments do not get reversed, the ordering for
+ // doubles on the stack must be opposite the Java convention
+ assert(sig_bt[i+1] == T_VOID, "missing Half" );
+ regs[i].set2(VMRegImpl::stack2reg(stack));
+ stack += 2;
+ break;
+ case T_VOID: regs[i].set_bad(); break;
+ default:
+ ShouldNotReachHere();
+ break;
+ }
+ }
+ return stack;
+}
+
+// A simple move of integer like type
+static void simple_move32(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
+ if (src.first()->is_stack()) {
+ if (dst.first()->is_stack()) {
+ // stack to stack
+ // __ ld(FP, reg2offset(src.first()) + STACK_BIAS, L5);
+ // __ st(L5, SP, reg2offset(dst.first()) + STACK_BIAS);
+ __ movl(rax, Address(rbp, reg2offset_in(src.first())));
+ __ movl(Address(rsp, reg2offset_out(dst.first())), rax);
+ } else {
+ // stack to reg
+ __ movl(dst.first()->as_Register(), Address(rbp, reg2offset_in(src.first())));
+ }
+ } else if (dst.first()->is_stack()) {
+ // reg to stack
+ __ movl(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());
+ } else {
+ __ movl(dst.first()->as_Register(), src.first()->as_Register());
+ }
+}
+
+// An oop arg. Must pass a handle not the oop itself
+static void object_move(MacroAssembler* masm,
+ OopMap* map,
+ int oop_handle_offset,
+ int framesize_in_slots,
+ VMRegPair src,
+ VMRegPair dst,
+ bool is_receiver,
+ int* receiver_offset) {
+
+ // Because of the calling conventions we know that src can be a
+ // register or a stack location. dst can only be a stack location.
+
+ assert(dst.first()->is_stack(), "must be stack");
+ // must pass a handle. First figure out the location we use as a handle
+
+ if (src.first()->is_stack()) {
+ // Oop is already on the stack as an argument
+ Register rHandle = rax;
+ Label nil;
+ __ xorl(rHandle, rHandle);
+ __ cmpl(Address(rbp, reg2offset_in(src.first())), NULL_WORD);
+ __ jcc(Assembler::equal, nil);
+ __ leal(rHandle, Address(rbp, reg2offset_in(src.first())));
+ __ bind(nil);
+ __ movl(Address(rsp, reg2offset_out(dst.first())), rHandle);
+
+ int offset_in_older_frame = src.first()->reg2stack() + SharedRuntime::out_preserve_stack_slots();
+ map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + framesize_in_slots));
+ if (is_receiver) {
+ *receiver_offset = (offset_in_older_frame + framesize_in_slots) * VMRegImpl::stack_slot_size;
+ }
+ } else {
+ // Oop is in an a register we must store it to the space we reserve
+ // on the stack for oop_handles
+ const Register rOop = src.first()->as_Register();
+ const Register rHandle = rax;
+ int oop_slot = (rOop == rcx ? 0 : 1) * VMRegImpl::slots_per_word + oop_handle_offset;
+ int offset = oop_slot*VMRegImpl::stack_slot_size;
+ Label skip;
+ __ movl(Address(rsp, offset), rOop);
+ map->set_oop(VMRegImpl::stack2reg(oop_slot));
+ __ xorl(rHandle, rHandle);
+ __ cmpl(rOop, NULL_WORD);
+ __ jcc(Assembler::equal, skip);
+ __ leal(rHandle, Address(rsp, offset));
+ __ bind(skip);
+ // Store the handle parameter
+ __ movl(Address(rsp, reg2offset_out(dst.first())), rHandle);
+ if (is_receiver) {
+ *receiver_offset = offset;
+ }
+ }
+}
+
+// A float arg may have to do float reg int reg conversion
+static void float_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
+ assert(!src.second()->is_valid() && !dst.second()->is_valid(), "bad float_move");
+
+ // Because of the calling convention we know that src is either a stack location
+ // or an xmm register. dst can only be a stack location.
+
+ assert(dst.first()->is_stack() && ( src.first()->is_stack() || src.first()->is_XMMRegister()), "bad parameters");
+
+ if (src.first()->is_stack()) {
+ __ movl(rax, Address(rbp, reg2offset_in(src.first())));
+ __ movl(Address(rsp, reg2offset_out(dst.first())), rax);
+ } else {
+ // reg to stack
+ __ movflt(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());
+ }
+}
+
+// A long move
+static void long_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
+
+ // The only legal possibility for a long_move VMRegPair is:
+ // 1: two stack slots (possibly unaligned)
+ // as neither the java or C calling convention will use registers
+ // for longs.
+
+ if (src.first()->is_stack() && dst.first()->is_stack()) {
+ assert(src.second()->is_stack() && dst.second()->is_stack(), "must be all stack");
+ __ movl(rax, Address(rbp, reg2offset_in(src.first())));
+ __ movl(rbx, Address(rbp, reg2offset_in(src.second())));
+ __ movl(Address(rsp, reg2offset_out(dst.first())), rax);
+ __ movl(Address(rsp, reg2offset_out(dst.second())), rbx);
+ } else {
+ ShouldNotReachHere();
+ }
+}
+
+// A double move
+static void double_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
+
+ // The only legal possibilities for a double_move VMRegPair are:
+ // The painful thing here is that like long_move a VMRegPair might be
+
+ // Because of the calling convention we know that src is either
+ // 1: a single physical register (xmm registers only)
+ // 2: two stack slots (possibly unaligned)
+ // dst can only be a pair of stack slots.
+
+ assert(dst.first()->is_stack() && (src.first()->is_XMMRegister() || src.first()->is_stack()), "bad args");
+
+ if (src.first()->is_stack()) {
+ // source is all stack
+ __ movl(rax, Address(rbp, reg2offset_in(src.first())));
+ __ movl(rbx, Address(rbp, reg2offset_in(src.second())));
+ __ movl(Address(rsp, reg2offset_out(dst.first())), rax);
+ __ movl(Address(rsp, reg2offset_out(dst.second())), rbx);
+ } else {
+ // reg to stack
+ // No worries about stack alignment
+ __ movdbl(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());
+ }
+}
+
+
+void SharedRuntime::save_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
+ // We always ignore the frame_slots arg and just use the space just below frame pointer
+ // which by this time is free to use
+ switch (ret_type) {
+ case T_FLOAT:
+ __ fstp_s(Address(rbp, -wordSize));
+ break;
+ case T_DOUBLE:
+ __ fstp_d(Address(rbp, -2*wordSize));
+ break;
+ case T_VOID: break;
+ case T_LONG:
+ __ movl(Address(rbp, -wordSize), rax);
+ __ movl(Address(rbp, -2*wordSize), rdx);
+ break;
+ default: {
+ __ movl(Address(rbp, -wordSize), rax);
+ }
+ }
+}
+
+void SharedRuntime::restore_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
+ // We always ignore the frame_slots arg and just use the space just below frame pointer
+ // which by this time is free to use
+ switch (ret_type) {
+ case T_FLOAT:
+ __ fld_s(Address(rbp, -wordSize));
+ break;
+ case T_DOUBLE:
+ __ fld_d(Address(rbp, -2*wordSize));
+ break;
+ case T_LONG:
+ __ movl(rax, Address(rbp, -wordSize));
+ __ movl(rdx, Address(rbp, -2*wordSize));
+ break;
+ case T_VOID: break;
+ default: {
+ __ movl(rax, Address(rbp, -wordSize));
+ }
+ }
+}
+
+// ---------------------------------------------------------------------------
+// Generate a native wrapper for a given method. The method takes arguments
+// in the Java compiled code convention, marshals them to the native
+// convention (handlizes oops, etc), transitions to native, makes the call,
+// returns to java state (possibly blocking), unhandlizes any result and
+// returns.
+nmethod *SharedRuntime::generate_native_wrapper(MacroAssembler *masm,
+ methodHandle method,
+ int total_in_args,
+ int comp_args_on_stack,
+ BasicType *in_sig_bt,
+ VMRegPair *in_regs,
+ BasicType ret_type) {
+
+ // An OopMap for lock (and class if static)
+ OopMapSet *oop_maps = new OopMapSet();
+
+ // We have received a description of where all the java arg are located
+ // on entry to the wrapper. We need to convert these args to where
+ // the jni function will expect them. To figure out where they go
+ // we convert the java signature to a C signature by inserting
+ // the hidden arguments as arg[0] and possibly arg[1] (static method)
+
+ int total_c_args = total_in_args + 1;
+ if (method->is_static()) {
+ total_c_args++;
+ }
+
+ BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_c_args);
+ VMRegPair* out_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_c_args);
+
+ int argc = 0;
+ out_sig_bt[argc++] = T_ADDRESS;
+ if (method->is_static()) {
+ out_sig_bt[argc++] = T_OBJECT;
+ }
+
+ int i;
+ for (i = 0; i < total_in_args ; i++ ) {
+ out_sig_bt[argc++] = in_sig_bt[i];
+ }
+
+
+ // Now figure out where the args must be stored and how much stack space
+ // they require (neglecting out_preserve_stack_slots but space for storing
+ // the 1st six register arguments). It's weird see int_stk_helper.
+ //
+ int out_arg_slots;
+ out_arg_slots = c_calling_convention(out_sig_bt, out_regs, total_c_args);
+
+ // Compute framesize for the wrapper. We need to handlize all oops in
+ // registers a max of 2 on x86.
+
+ // Calculate the total number of stack slots we will need.
+
+ // First count the abi requirement plus all of the outgoing args
+ int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;
+
+ // Now the space for the inbound oop handle area
+
+ int oop_handle_offset = stack_slots;
+ stack_slots += 2*VMRegImpl::slots_per_word;
+
+ // Now any space we need for handlizing a klass if static method
+
+ int klass_slot_offset = 0;
+ int klass_offset = -1;
+ int lock_slot_offset = 0;
+ bool is_static = false;
+ int oop_temp_slot_offset = 0;
+
+ if (method->is_static()) {
+ klass_slot_offset = stack_slots;
+ stack_slots += VMRegImpl::slots_per_word;
+ klass_offset = klass_slot_offset * VMRegImpl::stack_slot_size;
+ is_static = true;
+ }
+
+ // Plus a lock if needed
+
+ if (method->is_synchronized()) {
+ lock_slot_offset = stack_slots;
+ stack_slots += VMRegImpl::slots_per_word;
+ }
+
+ // Now a place (+2) to save return values or temp during shuffling
+ // + 2 for return address (which we own) and saved rbp,
+ stack_slots += 4;
+
+ // Ok The space we have allocated will look like:
+ //
+ //
+ // FP-> | |
+ // |---------------------|
+ // | 2 slots for moves |
+ // |---------------------|
+ // | lock box (if sync) |
+ // |---------------------| <- lock_slot_offset (-lock_slot_rbp_offset)
+ // | klass (if static) |
+ // |---------------------| <- klass_slot_offset
+ // | oopHandle area |
+ // |---------------------| <- oop_handle_offset (a max of 2 registers)
+ // | outbound memory |
+ // | based arguments |
+ // | |
+ // |---------------------|
+ // | |
+ // SP-> | out_preserved_slots |
+ //
+ //
+ // ****************************************************************************
+ // WARNING - on Windows Java Natives use pascal calling convention and pop the
+ // arguments off of the stack after the jni call. Before the call we can use
+ // instructions that are SP relative. After the jni call we switch to FP
+ // relative instructions instead of re-adjusting the stack on windows.
+ // ****************************************************************************
+
+
+ // Now compute actual number of stack words we need rounding to make
+ // stack properly aligned.
+ stack_slots = round_to(stack_slots, 2 * VMRegImpl::slots_per_word);
+
+ int stack_size = stack_slots * VMRegImpl::stack_slot_size;
+
+ intptr_t start = (intptr_t)__ pc();
+
+ // First thing make an ic check to see if we should even be here
+
+ // We are free to use all registers as temps without saving them and
+ // restoring them except rbp,. rbp, is the only callee save register
+ // as far as the interpreter and the compiler(s) are concerned.
+
+
+ const Register ic_reg = rax;
+ const Register receiver = rcx;
+ Label hit;
+ Label exception_pending;
+
+
+ __ verify_oop(receiver);
+ __ cmpl(ic_reg, Address(receiver, oopDesc::klass_offset_in_bytes()));
+ __ jcc(Assembler::equal, hit);
+
+ __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
+
+ // verified entry must be aligned for code patching.
+ // and the first 5 bytes must be in the same cache line
+ // if we align at 8 then we will be sure 5 bytes are in the same line
+ __ align(8);
+
+ __ bind(hit);
+
+ int vep_offset = ((intptr_t)__ pc()) - start;
+
+#ifdef COMPILER1
+ if (InlineObjectHash && method->intrinsic_id() == vmIntrinsics::_hashCode) {
+ // Object.hashCode can pull the hashCode from the header word
+ // instead of doing a full VM transition once it's been computed.
+ // Since hashCode is usually polymorphic at call sites we can't do
+ // this optimization at the call site without a lot of work.
+ Label slowCase;
+ Register receiver = rcx;
+ Register result = rax;
+ __ movl(result, Address(receiver, oopDesc::mark_offset_in_bytes()));
+
+ // check if locked
+ __ testl (result, markOopDesc::unlocked_value);
+ __ jcc (Assembler::zero, slowCase);
+
+ if (UseBiasedLocking) {
+ // Check if biased and fall through to runtime if so
+ __ testl (result, markOopDesc::biased_lock_bit_in_place);
+ __ jcc (Assembler::notZero, slowCase);
+ }
+
+ // get hash
+ __ andl (result, markOopDesc::hash_mask_in_place);
+ // test if hashCode exists
+ __ jcc (Assembler::zero, slowCase);
+ __ shrl (result, markOopDesc::hash_shift);
+ __ ret(0);
+ __ bind (slowCase);
+ }
+#endif // COMPILER1
+
+ // The instruction at the verified entry point must be 5 bytes or longer
+ // because it can be patched on the fly by make_non_entrant. The stack bang
+ // instruction fits that requirement.
+
+ // Generate stack overflow check
+
+ if (UseStackBanging) {
+ __ bang_stack_with_offset(StackShadowPages*os::vm_page_size());
+ } else {
+ // need a 5 byte instruction to allow MT safe patching to non-entrant
+ __ fat_nop();
+ }
+
+ // Generate a new frame for the wrapper.
+ __ enter();
+ // -2 because return address is already present and so is saved rbp,
+ __ subl(rsp, stack_size - 2*wordSize);
+
+ // Frame is now completed as far a size and linkage.
+
+ int frame_complete = ((intptr_t)__ pc()) - start;
+
+ // Calculate the difference between rsp and rbp,. We need to know it
+ // after the native call because on windows Java Natives will pop
+ // the arguments and it is painful to do rsp relative addressing
+ // in a platform independent way. So after the call we switch to
+ // rbp, relative addressing.
+
+ int fp_adjustment = stack_size - 2*wordSize;
+
+#ifdef COMPILER2
+ // C2 may leave the stack dirty if not in SSE2+ mode
+ if (UseSSE >= 2) {
+ __ verify_FPU(0, "c2i transition should have clean FPU stack");
+ } else {
+ __ empty_FPU_stack();
+ }
+#endif /* COMPILER2 */
+
+ // Compute the rbp, offset for any slots used after the jni call
+
+ int lock_slot_rbp_offset = (lock_slot_offset*VMRegImpl::stack_slot_size) - fp_adjustment;
+ int oop_temp_slot_rbp_offset = (oop_temp_slot_offset*VMRegImpl::stack_slot_size) - fp_adjustment;
+
+ // We use rdi as a thread pointer because it is callee save and
+ // if we load it once it is usable thru the entire wrapper
+ const Register thread = rdi;
+
+ // We use rsi as the oop handle for the receiver/klass
+ // It is callee save so it survives the call to native
+
+ const Register oop_handle_reg = rsi;
+
+ __ get_thread(thread);
+
+
+ //
+ // We immediately shuffle the arguments so that any vm call we have to
+ // make from here on out (sync slow path, jvmti, etc.) we will have
+ // captured the oops from our caller and have a valid oopMap for
+ // them.
+
+ // -----------------
+ // The Grand Shuffle
+ //
+ // Natives require 1 or 2 extra arguments over the normal ones: the JNIEnv*
+ // and, if static, the class mirror instead of a receiver. This pretty much
+ // guarantees that register layout will not match (and x86 doesn't use reg
+ // parms though amd does). Since the native abi doesn't use register args
+ // and the java conventions does we don't have to worry about collisions.
+ // All of our moved are reg->stack or stack->stack.
+ // We ignore the extra arguments during the shuffle and handle them at the
+ // last moment. The shuffle is described by the two calling convention
+ // vectors we have in our possession. We simply walk the java vector to
+ // get the source locations and the c vector to get the destinations.
+
+ int c_arg = method->is_static() ? 2 : 1 ;
+
+ // Record rsp-based slot for receiver on stack for non-static methods
+ int receiver_offset = -1;
+
+ // This is a trick. We double the stack slots so we can claim
+ // the oops in the caller's frame. Since we are sure to have
+ // more args than the caller doubling is enough to make
+ // sure we can capture all the incoming oop args from the
+ // caller.
+ //
+ OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
+
+ // Mark location of rbp,
+ // map->set_callee_saved(VMRegImpl::stack2reg( stack_slots - 2), stack_slots * 2, 0, rbp->as_VMReg());
+
+ // We know that we only have args in at most two integer registers (rcx, rdx). So rax, rbx
+ // Are free to temporaries if we have to do stack to steck moves.
+ // All inbound args are referenced based on rbp, and all outbound args via rsp.
+
+ for (i = 0; i < total_in_args ; i++, c_arg++ ) {
+ switch (in_sig_bt[i]) {
+ case T_ARRAY:
+ case T_OBJECT:
+ object_move(masm, map, oop_handle_offset, stack_slots, in_regs[i], out_regs[c_arg],
+ ((i == 0) && (!is_static)),
+ &receiver_offset);
+ break;
+ case T_VOID:
+ break;
+
+ case T_FLOAT:
+ float_move(masm, in_regs[i], out_regs[c_arg]);
+ break;
+
+ case T_DOUBLE:
+ assert( i + 1 < total_in_args &&
+ in_sig_bt[i + 1] == T_VOID &&
+ out_sig_bt[c_arg+1] == T_VOID, "bad arg list");
+ double_move(masm, in_regs[i], out_regs[c_arg]);
+ break;
+
+ case T_LONG :
+ long_move(masm, in_regs[i], out_regs[c_arg]);
+ break;
+
+ case T_ADDRESS: assert(false, "found T_ADDRESS in java args");
+
+ default:
+ simple_move32(masm, in_regs[i], out_regs[c_arg]);
+ }
+ }
+
+ // Pre-load a static method's oop into rsi. Used both by locking code and
+ // the normal JNI call code.
+ if (method->is_static()) {
+
+ // load opp into a register
+ __ movoop(oop_handle_reg, JNIHandles::make_local(Klass::cast(method->method_holder())->java_mirror()));
+
+ // Now handlize the static class mirror it's known not-null.
+ __ movl(Address(rsp, klass_offset), oop_handle_reg);
+ map->set_oop(VMRegImpl::stack2reg(klass_slot_offset));
+
+ // Now get the handle
+ __ leal(oop_handle_reg, Address(rsp, klass_offset));
+ // store the klass handle as second argument
+ __ movl(Address(rsp, wordSize), oop_handle_reg);
+ }
+
+ // Change state to native (we save the return address in the thread, since it might not
+ // be pushed on the stack when we do a a stack traversal). It is enough that the pc()
+ // points into the right code segment. It does not have to be the correct return pc.
+ // We use the same pc/oopMap repeatedly when we call out
+
+ intptr_t the_pc = (intptr_t) __ pc();
+ oop_maps->add_gc_map(the_pc - start, map);
+
+ __ set_last_Java_frame(thread, rsp, noreg, (address)the_pc);
+
+
+ // We have all of the arguments setup at this point. We must not touch any register
+ // argument registers at this point (what if we save/restore them there are no oop?
+
+ {
+ SkipIfEqual skip_if(masm, &DTraceMethodProbes, 0);
+ __ movoop(rax, JNIHandles::make_local(method()));
+ __ call_VM_leaf(
+ CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),
+ thread, rax);
+ }
+
+
+ // These are register definitions we need for locking/unlocking
+ const Register swap_reg = rax; // Must use rax, for cmpxchg instruction
+ const Register obj_reg = rcx; // Will contain the oop
+ const Register lock_reg = rdx; // Address of compiler lock object (BasicLock)
+
+ Label slow_path_lock;
+ Label lock_done;
+
+ // Lock a synchronized method
+ if (method->is_synchronized()) {
+
+
+ const int mark_word_offset = BasicLock::displaced_header_offset_in_bytes();
+
+ // Get the handle (the 2nd argument)
+ __ movl(oop_handle_reg, Address(rsp, wordSize));
+
+ // Get address of the box
+
+ __ leal(lock_reg, Address(rbp, lock_slot_rbp_offset));
+
+ // Load the oop from the handle
+ __ movl(obj_reg, Address(oop_handle_reg, 0));
+
+ if (UseBiasedLocking) {
+ // Note that oop_handle_reg is trashed during this call
+ __ biased_locking_enter(lock_reg, obj_reg, swap_reg, oop_handle_reg, false, lock_done, &slow_path_lock);
+ }
+
+ // Load immediate 1 into swap_reg %rax,
+ __ movl(swap_reg, 1);
+
+ // Load (object->mark() | 1) into swap_reg %rax,
+ __ orl(swap_reg, Address(obj_reg, 0));
+
+ // Save (object->mark() | 1) into BasicLock's displaced header
+ __ movl(Address(lock_reg, mark_word_offset), swap_reg);
+
+ if (os::is_MP()) {
+ __ lock();
+ }
+
+ // src -> dest iff dest == rax, else rax, <- dest
+ // *obj_reg = lock_reg iff *obj_reg == rax, else rax, = *(obj_reg)
+ __ cmpxchg(lock_reg, Address(obj_reg, 0));
+ __ jcc(Assembler::equal, lock_done);
+
+ // Test if the oopMark is an obvious stack pointer, i.e.,
+ // 1) (mark & 3) == 0, and
+ // 2) rsp <= mark < mark + os::pagesize()
+ // These 3 tests can be done by evaluating the following
+ // expression: ((mark - rsp) & (3 - os::vm_page_size())),
+ // assuming both stack pointer and pagesize have their
+ // least significant 2 bits clear.
+ // NOTE: the oopMark is in swap_reg %rax, as the result of cmpxchg
+
+ __ subl(swap_reg, rsp);
+ __ andl(swap_reg, 3 - os::vm_page_size());
+
+ // Save the test result, for recursive case, the result is zero
+ __ movl(Address(lock_reg, mark_word_offset), swap_reg);
+ __ jcc(Assembler::notEqual, slow_path_lock);
+ // Slow path will re-enter here
+ __ bind(lock_done);
+
+ if (UseBiasedLocking) {
+ // Re-fetch oop_handle_reg as we trashed it above
+ __ movl(oop_handle_reg, Address(rsp, wordSize));
+ }
+ }
+
+
+ // Finally just about ready to make the JNI call
+
+
+ // get JNIEnv* which is first argument to native
+
+ __ leal(rdx, Address(thread, in_bytes(JavaThread::jni_environment_offset())));
+ __ movl(Address(rsp, 0), rdx);
+
+ // Now set thread in native
+ __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_native);
+
+ __ call(RuntimeAddress(method->native_function()));
+
+ // WARNING - on Windows Java Natives use pascal calling convention and pop the
+ // arguments off of the stack. We could just re-adjust the stack pointer here
+ // and continue to do SP relative addressing but we instead switch to FP
+ // relative addressing.
+
+ // Unpack native results.
+ switch (ret_type) {
+ case T_BOOLEAN: __ c2bool(rax); break;
+ case T_CHAR : __ andl(rax, 0xFFFF); break;
+ case T_BYTE : __ sign_extend_byte (rax); break;
+ case T_SHORT : __ sign_extend_short(rax); break;
+ case T_INT : /* nothing to do */ break;
+ case T_DOUBLE :
+ case T_FLOAT :
+ // Result is in st0 we'll save as needed
+ break;
+ case T_ARRAY: // Really a handle
+ case T_OBJECT: // Really a handle
+ break; // can't de-handlize until after safepoint check
+ case T_VOID: break;
+ case T_LONG: break;
+ default : ShouldNotReachHere();
+ }
+
+ // Switch thread to "native transition" state before reading the synchronization state.
+ // This additional state is necessary because reading and testing the synchronization
+ // state is not atomic w.r.t. GC, as this scenario demonstrates:
+ // Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted.
+ // VM thread changes sync state to synchronizing and suspends threads for GC.
+ // Thread A is resumed to finish this native method, but doesn't block here since it
+ // didn't see any synchronization is progress, and escapes.
+ __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_native_trans);
+
+ if(os::is_MP()) {
+ if (UseMembar) {
+ __ membar(); // Force this write out before the read below
+ } else {
+ // Write serialization page so VM thread can do a pseudo remote membar.
+ // We use the current thread pointer to calculate a thread specific
+ // offset to write to within the page. This minimizes bus traffic
+ // due to cache line collision.
+ __ serialize_memory(thread, rcx);
+ }
+ }
+
+ if (AlwaysRestoreFPU) {
+ // Make sure the control word is correct.
+ __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
+ }
+
+ // check for safepoint operation in progress and/or pending suspend requests
+ { Label Continue;
+
+ __ cmp32(ExternalAddress((address)SafepointSynchronize::address_of_state()),
+ SafepointSynchronize::_not_synchronized);
+
+ Label L;
+ __ jcc(Assembler::notEqual, L);
+ __ cmpl(Address(thread, JavaThread::suspend_flags_offset()), 0);
+ __ jcc(Assembler::equal, Continue);
+ __ bind(L);
+
+ // Don't use call_VM as it will see a possible pending exception and forward it
+ // and never return here preventing us from clearing _last_native_pc down below.
+ // Also can't use call_VM_leaf either as it will check to see if rsi & rdi are
+ // preserved and correspond to the bcp/locals pointers. So we do a runtime call
+ // by hand.
+ //
+ save_native_result(masm, ret_type, stack_slots);
+ __ pushl(thread);
+ __ call(RuntimeAddress(CAST_FROM_FN_PTR(address,
+ JavaThread::check_special_condition_for_native_trans)));
+ __ increment(rsp, wordSize);
+ // Restore any method result value
+ restore_native_result(masm, ret_type, stack_slots);
+
+ __ bind(Continue);
+ }
+
+ // change thread state
+ __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_Java);
+
+ Label reguard;
+ Label reguard_done;
+ __ cmpl(Address(thread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_yellow_disabled);
+ __ jcc(Assembler::equal, reguard);
+
+ // slow path reguard re-enters here
+ __ bind(reguard_done);
+
+ // Handle possible exception (will unlock if necessary)
+
+ // native result if any is live
+
+ // Unlock
+ Label slow_path_unlock;
+ Label unlock_done;
+ if (method->is_synchronized()) {
+
+ Label done;
+
+ // Get locked oop from the handle we passed to jni
+ __ movl(obj_reg, Address(oop_handle_reg, 0));
+
+ if (UseBiasedLocking) {
+ __ biased_locking_exit(obj_reg, rbx, done);
+ }
+
+ // Simple recursive lock?
+
+ __ cmpl(Address(rbp, lock_slot_rbp_offset), NULL_WORD);
+ __ jcc(Assembler::equal, done);
+
+ // Must save rax, if if it is live now because cmpxchg must use it
+ if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {
+ save_native_result(masm, ret_type, stack_slots);
+ }
+
+ // get old displaced header
+ __ movl(rbx, Address(rbp, lock_slot_rbp_offset));
+
+ // get address of the stack lock
+ __ leal(rax, Address(rbp, lock_slot_rbp_offset));
+
+ // Atomic swap old header if oop still contains the stack lock
+ if (os::is_MP()) {
+ __ lock();
+ }
+
+ // src -> dest iff dest == rax, else rax, <- dest
+ // *obj_reg = rbx, iff *obj_reg == rax, else rax, = *(obj_reg)
+ __ cmpxchg(rbx, Address(obj_reg, 0));
+ __ jcc(Assembler::notEqual, slow_path_unlock);
+
+ // slow path re-enters here
+ __ bind(unlock_done);
+ if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {
+ restore_native_result(masm, ret_type, stack_slots);
+ }
+
+ __ bind(done);
+
+ }
+
+ {
+ SkipIfEqual skip_if(masm, &DTraceMethodProbes, 0);
+ // Tell dtrace about this method exit
+ save_native_result(masm, ret_type, stack_slots);
+ __ movoop(rax, JNIHandles::make_local(method()));
+ __ call_VM_leaf(
+ CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
+ thread, rax);
+ restore_native_result(masm, ret_type, stack_slots);
+ }
+
+ // We can finally stop using that last_Java_frame we setup ages ago
+
+ __ reset_last_Java_frame(thread, false, true);
+
+ // Unpack oop result
+ if (ret_type == T_OBJECT || ret_type == T_ARRAY) {
+ Label L;
+ __ cmpl(rax, NULL_WORD);
+ __ jcc(Assembler::equal, L);
+ __ movl(rax, Address(rax, 0));
+ __ bind(L);
+ __ verify_oop(rax);
+ }
+
+ // reset handle block
+ __ movl(rcx, Address(thread, JavaThread::active_handles_offset()));
+
+ __ movl(Address(rcx, JNIHandleBlock::top_offset_in_bytes()), 0);
+
+ // Any exception pending?
+ __ cmpl(Address(thread, in_bytes(Thread::pending_exception_offset())), NULL_WORD);
+ __ jcc(Assembler::notEqual, exception_pending);
+
+
+ // no exception, we're almost done
+
+ // check that only result value is on FPU stack
+ __ verify_FPU(ret_type == T_FLOAT || ret_type == T_DOUBLE ? 1 : 0, "native_wrapper normal exit");
+
+ // Fixup floating pointer results so that result looks like a return from a compiled method
+ if (ret_type == T_FLOAT) {
+ if (UseSSE >= 1) {
+ // Pop st0 and store as float and reload into xmm register
+ __ fstp_s(Address(rbp, -4));
+ __ movflt(xmm0, Address(rbp, -4));
+ }
+ } else if (ret_type == T_DOUBLE) {
+ if (UseSSE >= 2) {
+ // Pop st0 and store as double and reload into xmm register
+ __ fstp_d(Address(rbp, -8));
+ __ movdbl(xmm0, Address(rbp, -8));
+ }
+ }
+
+ // Return
+
+ __ leave();
+ __ ret(0);
+
+ // Unexpected paths are out of line and go here
+
+ // Slow path locking & unlocking
+ if (method->is_synchronized()) {
+
+ // BEGIN Slow path lock
+
+ __ bind(slow_path_lock);
+
+ // has last_Java_frame setup. No exceptions so do vanilla call not call_VM
+ // args are (oop obj, BasicLock* lock, JavaThread* thread)
+ __ pushl(thread);
+ __ pushl(lock_reg);
+ __ pushl(obj_reg);
+ __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_locking_C)));
+ __ addl(rsp, 3*wordSize);
+
+#ifdef ASSERT
+ { Label L;
+ __ cmpl(Address(thread, in_bytes(Thread::pending_exception_offset())), (int)NULL_WORD);
+ __ jcc(Assembler::equal, L);
+ __ stop("no pending exception allowed on exit from monitorenter");
+ __ bind(L);
+ }
+#endif
+ __ jmp(lock_done);
+
+ // END Slow path lock
+
+ // BEGIN Slow path unlock
+ __ bind(slow_path_unlock);
+
+ // Slow path unlock
+
+ if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {
+ save_native_result(masm, ret_type, stack_slots);
+ }
+ // Save pending exception around call to VM (which contains an EXCEPTION_MARK)
+
+ __ pushl(Address(thread, in_bytes(Thread::pending_exception_offset())));
+ __ movl(Address(thread, in_bytes(Thread::pending_exception_offset())), NULL_WORD);
+
+
+ // should be a peal
+ // +wordSize because of the push above
+ __ leal(rax, Address(rbp, lock_slot_rbp_offset));
+ __ pushl(rax);
+
+ __ pushl(obj_reg);
+ __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_unlocking_C)));
+ __ addl(rsp, 2*wordSize);
+#ifdef ASSERT
+ {
+ Label L;
+ __ cmpl(Address(thread, in_bytes(Thread::pending_exception_offset())), NULL_WORD);
+ __ jcc(Assembler::equal, L);
+ __ stop("no pending exception allowed on exit complete_monitor_unlocking_C");
+ __ bind(L);
+ }
+#endif /* ASSERT */
+
+ __ popl(Address(thread, in_bytes(Thread::pending_exception_offset())));
+
+ if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {
+ restore_native_result(masm, ret_type, stack_slots);
+ }
+ __ jmp(unlock_done);
+ // END Slow path unlock
+
+ }
+
+ // SLOW PATH Reguard the stack if needed
+
+ __ bind(reguard);
+ save_native_result(masm, ret_type, stack_slots);
+ {
+ __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages)));
+ }
+ restore_native_result(masm, ret_type, stack_slots);
+ __ jmp(reguard_done);
+
+
+ // BEGIN EXCEPTION PROCESSING
+
+ // Forward the exception
+ __ bind(exception_pending);
+
+ // remove possible return value from FPU register stack
+ __ empty_FPU_stack();
+
+ // pop our frame
+ __ leave();
+ // and forward the exception
+ __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
+
+ __ flush();
+
+ nmethod *nm = nmethod::new_native_nmethod(method,
+ masm->code(),
+ vep_offset,
+ frame_complete,
+ stack_slots / VMRegImpl::slots_per_word,
+ (is_static ? in_ByteSize(klass_offset) : in_ByteSize(receiver_offset)),
+ in_ByteSize(lock_slot_offset*VMRegImpl::stack_slot_size),
+ oop_maps);
+ return nm;
+
+}
+
+// this function returns the adjust size (in number of words) to a c2i adapter
+// activation for use during deoptimization
+int Deoptimization::last_frame_adjust(int callee_parameters, int callee_locals ) {
+ return (callee_locals - callee_parameters) * Interpreter::stackElementWords();
+}
+
+
+uint SharedRuntime::out_preserve_stack_slots() {
+ return 0;
+}
+
+
+//------------------------------generate_deopt_blob----------------------------
+void SharedRuntime::generate_deopt_blob() {
+ // allocate space for the code
+ ResourceMark rm;
+ // setup code generation tools
+ CodeBuffer buffer("deopt_blob", 1024, 1024);
+ MacroAssembler* masm = new MacroAssembler(&buffer);
+ int frame_size_in_words;
+ OopMap* map = NULL;
+ // Account for the extra args we place on the stack
+ // by the time we call fetch_unroll_info
+ const int additional_words = 2; // deopt kind, thread
+
+ OopMapSet *oop_maps = new OopMapSet();
+
+ // -------------
+ // This code enters when returning to a de-optimized nmethod. A return
+ // address has been pushed on the the stack, and return values are in
+ // registers.
+ // If we are doing a normal deopt then we were called from the patched
+ // nmethod from the point we returned to the nmethod. So the return
+ // address on the stack is wrong by NativeCall::instruction_size
+ // We will adjust the value to it looks like we have the original return
+ // address on the stack (like when we eagerly deoptimized).
+ // In the case of an exception pending with deoptimized then we enter
+ // with a return address on the stack that points after the call we patched
+ // into the exception handler. We have the following register state:
+ // rax,: exception
+ // rbx,: exception handler
+ // rdx: throwing pc
+ // So in this case we simply jam rdx into the useless return address and
+ // the stack looks just like we want.
+ //
+ // At this point we need to de-opt. We save the argument return
+ // registers. We call the first C routine, fetch_unroll_info(). This
+ // routine captures the return values and returns a structure which
+ // describes the current frame size and the sizes of all replacement frames.
+ // The current frame is compiled code and may contain many inlined
+ // functions, each with their own JVM state. We pop the current frame, then
+ // push all the new frames. Then we call the C routine unpack_frames() to
+ // populate these frames. Finally unpack_frames() returns us the new target
+ // address. Notice that callee-save registers are BLOWN here; they have
+ // already been captured in the vframeArray at the time the return PC was
+ // patched.
+ address start = __ pc();
+ Label cont;
+
+ // Prolog for non exception case!
+
+ // Save everything in sight.
+
+ map = RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words);
+ // Normal deoptimization
+ __ pushl(Deoptimization::Unpack_deopt);
+ __ jmp(cont);
+
+ int reexecute_offset = __ pc() - start;
+
+ // Reexecute case
+ // return address is the pc describes what bci to do re-execute at
+
+ // No need to update map as each call to save_live_registers will produce identical oopmap
+ (void) RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words);
+
+ __ pushl(Deoptimization::Unpack_reexecute);
+ __ jmp(cont);
+
+ int exception_offset = __ pc() - start;
+
+ // Prolog for exception case
+
+ // all registers are dead at this entry point, except for rax, and
+ // rdx which contain the exception oop and exception pc
+ // respectively. Set them in TLS and fall thru to the
+ // unpack_with_exception_in_tls entry point.
+
+ __ get_thread(rdi);
+ __ movl(Address(rdi, JavaThread::exception_pc_offset()), rdx);
+ __ movl(Address(rdi, JavaThread::exception_oop_offset()), rax);
+
+ int exception_in_tls_offset = __ pc() - start;
+
+ // new implementation because exception oop is now passed in JavaThread
+
+ // Prolog for exception case
+ // All registers must be preserved because they might be used by LinearScan
+ // Exceptiop oop and throwing PC are passed in JavaThread
+ // tos: stack at point of call to method that threw the exception (i.e. only
+ // args are on the stack, no return address)
+
+ // make room on stack for the return address
+ // It will be patched later with the throwing pc. The correct value is not
+ // available now because loading it from memory would destroy registers.
+ __ pushl(0);
+
+ // Save everything in sight.
+
+ // No need to update map as each call to save_live_registers will produce identical oopmap
+ (void) RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words);
+
+ // Now it is safe to overwrite any register
+
+ // store the correct deoptimization type
+ __ pushl(Deoptimization::Unpack_exception);
+
+ // load throwing pc from JavaThread and patch it as the return address
+ // of the current frame. Then clear the field in JavaThread
+ __ get_thread(rdi);
+ __ movl(rdx, Address(rdi, JavaThread::exception_pc_offset()));
+ __ movl(Address(rbp, wordSize), rdx);
+ __ movl(Address(rdi, JavaThread::exception_pc_offset()), NULL_WORD);
+
+#ifdef ASSERT
+ // verify that there is really an exception oop in JavaThread
+ __ movl(rax, Address(rdi, JavaThread::exception_oop_offset()));
+ __ verify_oop(rax);
+
+ // verify that there is no pending exception
+ Label no_pending_exception;
+ __ movl(rax, Address(rdi, Thread::pending_exception_offset()));
+ __ testl(rax, rax);
+ __ jcc(Assembler::zero, no_pending_exception);
+ __ stop("must not have pending exception here");
+ __ bind(no_pending_exception);
+#endif
+
+ __ bind(cont);
+
+ // Compiled code leaves the floating point stack dirty, empty it.
+ __ empty_FPU_stack();
+
+
+ // Call C code. Need thread and this frame, but NOT official VM entry
+ // crud. We cannot block on this call, no GC can happen.
+ __ get_thread(rcx);
+ __ pushl(rcx);
+ // fetch_unroll_info needs to call last_java_frame()
+ __ set_last_Java_frame(rcx, noreg, noreg, NULL);
+
+ __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::fetch_unroll_info)));
+
+ // Need to have an oopmap that tells fetch_unroll_info where to
+ // find any register it might need.
+
+ oop_maps->add_gc_map( __ pc()-start, map);
+
+ // Discard arg to fetch_unroll_info
+ __ popl(rcx);
+
+ __ get_thread(rcx);
+ __ reset_last_Java_frame(rcx, false, false);
+
+ // Load UnrollBlock into EDI
+ __ movl(rdi, rax);
+
+ // Move the unpack kind to a safe place in the UnrollBlock because
+ // we are very short of registers
+
+ Address unpack_kind(rdi, Deoptimization::UnrollBlock::unpack_kind_offset_in_bytes());
+ // retrieve the deopt kind from where we left it.
+ __ popl(rax);
+ __ movl(unpack_kind, rax); // save the unpack_kind value
+
+ Label noException;
+ __ cmpl(rax, Deoptimization::Unpack_exception); // Was exception pending?
+ __ jcc(Assembler::notEqual, noException);
+ __ movl(rax, Address(rcx, JavaThread::exception_oop_offset()));
+ __ movl(rdx, Address(rcx, JavaThread::exception_pc_offset()));
+ __ movl(Address(rcx, JavaThread::exception_oop_offset()), NULL_WORD);
+ __ movl(Address(rcx, JavaThread::exception_pc_offset()), NULL_WORD);
+
+ __ verify_oop(rax);
+
+ // Overwrite the result registers with the exception results.
+ __ movl(Address(rsp, RegisterSaver::raxOffset()*wordSize), rax);
+ __ movl(Address(rsp, RegisterSaver::rdxOffset()*wordSize), rdx);
+
+ __ bind(noException);
+
+ // Stack is back to only having register save data on the stack.
+ // Now restore the result registers. Everything else is either dead or captured
+ // in the vframeArray.
+
+ RegisterSaver::restore_result_registers(masm);
+
+ // All of the register save area has been popped of the stack. Only the
+ // return address remains.
+
+ // Pop all the frames we must move/replace.
+ //
+ // Frame picture (youngest to oldest)
+ // 1: self-frame (no frame link)
+ // 2: deopting frame (no frame link)
+ // 3: caller of deopting frame (could be compiled/interpreted).
+ //
+ // Note: by leaving the return address of self-frame on the stack
+ // and using the size of frame 2 to adjust the stack
+ // when we are done the return to frame 3 will still be on the stack.
+
+ // Pop deoptimized frame
+ __ addl(rsp,Address(rdi,Deoptimization::UnrollBlock::size_of_deoptimized_frame_offset_in_bytes()));
+
+ // sp should be pointing at the return address to the caller (3)
+
+ // Stack bang to make sure there's enough room for these interpreter frames.
+ if (UseStackBanging) {
+ __ movl(rbx, Address(rdi ,Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes()));
+ __ bang_stack_size(rbx, rcx);
+ }
+
+ // Load array of frame pcs into ECX
+ __ movl(rcx,Address(rdi,Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes()));
+
+ __ popl(rsi); // trash the old pc
+
+ // Load array of frame sizes into ESI
+ __ movl(rsi,Address(rdi,Deoptimization::UnrollBlock::frame_sizes_offset_in_bytes()));
+
+ Address counter(rdi, Deoptimization::UnrollBlock::counter_temp_offset_in_bytes());
+
+ __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock::number_of_frames_offset_in_bytes()));
+ __ movl(counter, rbx);
+
+ // Pick up the initial fp we should save
+ __ movl(rbp, Address(rdi, Deoptimization::UnrollBlock::initial_fp_offset_in_bytes()));
+
+ // Now adjust the caller's stack to make up for the extra locals
+ // but record the original sp so that we can save it in the skeletal interpreter
+ // frame and the stack walking of interpreter_sender will get the unextended sp
+ // value and not the "real" sp value.
+
+ Address sp_temp(rdi, Deoptimization::UnrollBlock::sender_sp_temp_offset_in_bytes());
+ __ movl(sp_temp, rsp);
+ __ subl(rsp, Address(rdi, Deoptimization::UnrollBlock::caller_adjustment_offset_in_bytes()));
+
+ // Push interpreter frames in a loop
+ Label loop;
+ __ bind(loop);
+ __ movl(rbx, Address(rsi, 0)); // Load frame size
+#ifdef CC_INTERP
+ __ subl(rbx, 4*wordSize); // we'll push pc and ebp by hand and
+#ifdef ASSERT
+ __ pushl(0xDEADDEAD); // Make a recognizable pattern
+ __ pushl(0xDEADDEAD);
+#else /* ASSERT */
+ __ subl(rsp, 2*wordSize); // skip the "static long no_param"
+#endif /* ASSERT */
+#else /* CC_INTERP */
+ __ subl(rbx, 2*wordSize); // we'll push pc and rbp, by hand
+#endif /* CC_INTERP */
+ __ pushl(Address(rcx, 0)); // save return address
+ __ enter(); // save old & set new rbp,
+ __ subl(rsp, rbx); // Prolog!
+ __ movl(rbx, sp_temp); // sender's sp
+#ifdef CC_INTERP
+ __ movl(Address(rbp,
+ -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))),
+ rbx); // Make it walkable
+#else /* CC_INTERP */
+ // This value is corrected by layout_activation_impl
+ __ movl(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD );
+ __ movl(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize), rbx); // Make it walkable
+#endif /* CC_INTERP */
+ __ movl(sp_temp, rsp); // pass to next frame
+ __ addl(rsi, 4); // Bump array pointer (sizes)
+ __ addl(rcx, 4); // Bump array pointer (pcs)
+ __ decrement(counter); // decrement counter
+ __ jcc(Assembler::notZero, loop);
+ __ pushl(Address(rcx, 0)); // save final return address
+
+ // Re-push self-frame
+ __ enter(); // save old & set new rbp,
+
+ // Return address and rbp, are in place
+ // We'll push additional args later. Just allocate a full sized
+ // register save area
+ __ subl(rsp, (frame_size_in_words-additional_words - 2) * wordSize);
+
+ // Restore frame locals after moving the frame
+ __ movl(Address(rsp, RegisterSaver::raxOffset()*wordSize), rax);
+ __ movl(Address(rsp, RegisterSaver::rdxOffset()*wordSize), rdx);
+ __ fstp_d(Address(rsp, RegisterSaver::fpResultOffset()*wordSize)); // Pop float stack and store in local
+ if( UseSSE>=2 ) __ movdbl(Address(rsp, RegisterSaver::xmm0Offset()*wordSize), xmm0);
+ if( UseSSE==1 ) __ movflt(Address(rsp, RegisterSaver::xmm0Offset()*wordSize), xmm0);
+
+ // Set up the args to unpack_frame
+
+ __ pushl(unpack_kind); // get the unpack_kind value
+ __ get_thread(rcx);
+ __ pushl(rcx);
+
+ // set last_Java_sp, last_Java_fp
+ __ set_last_Java_frame(rcx, noreg, rbp, NULL);
+
+ // Call C code. Need thread but NOT official VM entry
+ // crud. We cannot block on this call, no GC can happen. Call should
+ // restore return values to their stack-slots with the new SP.
+ __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames)));
+ // Set an oopmap for the call site
+ oop_maps->add_gc_map( __ pc()-start, new OopMap( frame_size_in_words, 0 ));
+
+ // rax, contains the return result type
+ __ pushl(rax);
+
+ __ get_thread(rcx);
+ __ reset_last_Java_frame(rcx, false, false);
+
+ // Collect return values
+ __ movl(rax,Address(rsp, (RegisterSaver::raxOffset() + additional_words + 1)*wordSize));
+ __ movl(rdx,Address(rsp, (RegisterSaver::rdxOffset() + additional_words + 1)*wordSize));
+
+ // Clear floating point stack before returning to interpreter
+ __ empty_FPU_stack();
+
+ // Check if we should push the float or double return value.
+ Label results_done, yes_double_value;
+ __ cmpl(Address(rsp, 0), T_DOUBLE);
+ __ jcc (Assembler::zero, yes_double_value);
+ __ cmpl(Address(rsp, 0), T_FLOAT);
+ __ jcc (Assembler::notZero, results_done);
+
+ // return float value as expected by interpreter
+ if( UseSSE>=1 ) __ movflt(xmm0, Address(rsp, (RegisterSaver::xmm0Offset() + additional_words + 1)*wordSize));
+ else __ fld_d(Address(rsp, (RegisterSaver::fpResultOffset() + additional_words + 1)*wordSize));
+ __ jmp(results_done);
+
+ // return double value as expected by interpreter
+ __ bind(yes_double_value);
+ if( UseSSE>=2 ) __ movdbl(xmm0, Address(rsp, (RegisterSaver::xmm0Offset() + additional_words + 1)*wordSize));
+ else __ fld_d(Address(rsp, (RegisterSaver::fpResultOffset() + additional_words + 1)*wordSize));
+
+ __ bind(results_done);
+
+ // Pop self-frame.
+ __ leave(); // Epilog!
+
+ // Jump to interpreter
+ __ ret(0);
+
+ // -------------
+ // make sure all code is generated
+ masm->flush();
+
+ _deopt_blob = DeoptimizationBlob::create( &buffer, oop_maps, 0, exception_offset, reexecute_offset, frame_size_in_words);
+ _deopt_blob->set_unpack_with_exception_in_tls_offset(exception_in_tls_offset);
+}
+
+
+#ifdef COMPILER2
+//------------------------------generate_uncommon_trap_blob--------------------
+void SharedRuntime::generate_uncommon_trap_blob() {
+ // allocate space for the code
+ ResourceMark rm;
+ // setup code generation tools
+ CodeBuffer buffer("uncommon_trap_blob", 512, 512);
+ MacroAssembler* masm = new MacroAssembler(&buffer);
+
+ enum frame_layout {
+ arg0_off, // thread sp + 0 // Arg location for
+ arg1_off, // unloaded_class_index sp + 1 // calling C
+ // The frame sender code expects that rbp will be in the "natural" place and
+ // will override any oopMap setting for it. We must therefore force the layout
+ // so that it agrees with the frame sender code.
+ rbp_off, // callee saved register sp + 2
+ return_off, // slot for return address sp + 3
+ framesize
+ };
+
+ address start = __ pc();
+ // Push self-frame.
+ __ subl(rsp, return_off*wordSize); // Epilog!
+
+ // rbp, is an implicitly saved callee saved register (i.e. the calling
+ // convention will save restore it in prolog/epilog) Other than that
+ // there are no callee save registers no that adapter frames are gone.
+ __ movl(Address(rsp, rbp_off*wordSize),rbp);
+
+ // Clear the floating point exception stack
+ __ empty_FPU_stack();
+
+ // set last_Java_sp
+ __ get_thread(rdx);
+ __ set_last_Java_frame(rdx, noreg, noreg, NULL);
+
+ // Call C code. Need thread but NOT official VM entry
+ // crud. We cannot block on this call, no GC can happen. Call should
+ // capture callee-saved registers as well as return values.
+ __ movl(Address(rsp, arg0_off*wordSize),rdx);
+ // argument already in ECX
+ __ movl(Address(rsp, arg1_off*wordSize),rcx);
+ __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::uncommon_trap)));
+
+ // Set an oopmap for the call site
+ OopMapSet *oop_maps = new OopMapSet();
+ OopMap* map = new OopMap( framesize, 0 );
+ // No oopMap for rbp, it is known implicitly
+
+ oop_maps->add_gc_map( __ pc()-start, map);
+
+ __ get_thread(rcx);
+
+ __ reset_last_Java_frame(rcx, false, false);
+
+ // Load UnrollBlock into EDI
+ __ movl(rdi, rax);
+
+ // Pop all the frames we must move/replace.
+ //
+ // Frame picture (youngest to oldest)
+ // 1: self-frame (no frame link)
+ // 2: deopting frame (no frame link)
+ // 3: caller of deopting frame (could be compiled/interpreted).
+
+ // Pop self-frame. We have no frame, and must rely only on EAX and ESP.
+ __ addl(rsp,(framesize-1)*wordSize); // Epilog!
+
+ // Pop deoptimized frame
+ __ addl(rsp,Address(rdi,Deoptimization::UnrollBlock::size_of_deoptimized_frame_offset_in_bytes()));
+
+ // sp should be pointing at the return address to the caller (3)
+
+ // Stack bang to make sure there's enough room for these interpreter frames.
+ if (UseStackBanging) {
+ __ movl(rbx, Address(rdi ,Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes()));
+ __ bang_stack_size(rbx, rcx);
+ }
+
+
+ // Load array of frame pcs into ECX
+ __ movl(rcx,Address(rdi,Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes()));
+
+ __ popl(rsi); // trash the pc
+
+ // Load array of frame sizes into ESI
+ __ movl(rsi,Address(rdi,Deoptimization::UnrollBlock::frame_sizes_offset_in_bytes()));
+
+ Address counter(rdi, Deoptimization::UnrollBlock::counter_temp_offset_in_bytes());
+
+ __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock::number_of_frames_offset_in_bytes()));
+ __ movl(counter, rbx);
+
+ // Pick up the initial fp we should save
+ __ movl(rbp, Address(rdi, Deoptimization::UnrollBlock::initial_fp_offset_in_bytes()));
+
+ // Now adjust the caller's stack to make up for the extra locals
+ // but record the original sp so that we can save it in the skeletal interpreter
+ // frame and the stack walking of interpreter_sender will get the unextended sp
+ // value and not the "real" sp value.
+
+ Address sp_temp(rdi, Deoptimization::UnrollBlock::sender_sp_temp_offset_in_bytes());
+ __ movl(sp_temp, rsp);
+ __ subl(rsp, Address(rdi, Deoptimization::UnrollBlock::caller_adjustment_offset_in_bytes()));
+
+ // Push interpreter frames in a loop
+ Label loop;
+ __ bind(loop);
+ __ movl(rbx, Address(rsi, 0)); // Load frame size
+#ifdef CC_INTERP
+ __ subl(rbx, 4*wordSize); // we'll push pc and ebp by hand and
+#ifdef ASSERT
+ __ pushl(0xDEADDEAD); // Make a recognizable pattern
+ __ pushl(0xDEADDEAD); // (parm to RecursiveInterpreter...)
+#else /* ASSERT */
+ __ subl(rsp, 2*wordSize); // skip the "static long no_param"
+#endif /* ASSERT */
+#else /* CC_INTERP */
+ __ subl(rbx, 2*wordSize); // we'll push pc and rbp, by hand
+#endif /* CC_INTERP */
+ __ pushl(Address(rcx, 0)); // save return address
+ __ enter(); // save old & set new rbp,
+ __ subl(rsp, rbx); // Prolog!
+ __ movl(rbx, sp_temp); // sender's sp
+#ifdef CC_INTERP
+ __ movl(Address(rbp,
+ -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))),
+ rbx); // Make it walkable
+#else /* CC_INTERP */
+ // This value is corrected by layout_activation_impl
+ __ movl(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD );
+ __ movl(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize), rbx); // Make it walkable
+#endif /* CC_INTERP */
+ __ movl(sp_temp, rsp); // pass to next frame
+ __ addl(rsi, 4); // Bump array pointer (sizes)
+ __ addl(rcx, 4); // Bump array pointer (pcs)
+ __ decrement(counter); // decrement counter
+ __ jcc(Assembler::notZero, loop);
+ __ pushl(Address(rcx, 0)); // save final return address
+
+ // Re-push self-frame
+ __ enter(); // save old & set new rbp,
+ __ subl(rsp, (framesize-2) * wordSize); // Prolog!
+
+
+ // set last_Java_sp, last_Java_fp
+ __ get_thread(rdi);
+ __ set_last_Java_frame(rdi, noreg, rbp, NULL);
+
+ // Call C code. Need thread but NOT official VM entry
+ // crud. We cannot block on this call, no GC can happen. Call should
+ // restore return values to their stack-slots with the new SP.
+ __ movl(Address(rsp,arg0_off*wordSize),rdi);
+ __ movl(Address(rsp,arg1_off*wordSize), Deoptimization::Unpack_uncommon_trap);
+ __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames)));
+ // Set an oopmap for the call site
+ oop_maps->add_gc_map( __ pc()-start, new OopMap( framesize, 0 ) );
+
+ __ get_thread(rdi);
+ __ reset_last_Java_frame(rdi, true, false);
+
+ // Pop self-frame.
+ __ leave(); // Epilog!
+
+ // Jump to interpreter
+ __ ret(0);
+
+ // -------------
+ // make sure all code is generated
+ masm->flush();
+
+ _uncommon_trap_blob = UncommonTrapBlob::create(&buffer, oop_maps, framesize);
+}
+#endif // COMPILER2
+
+//------------------------------generate_handler_blob------
+//
+// Generate a special Compile2Runtime blob that saves all registers,
+// setup oopmap, and calls safepoint code to stop the compiled code for
+// a safepoint.
+//
+static SafepointBlob* generate_handler_blob(address call_ptr, bool cause_return) {
+
+ // Account for thread arg in our frame
+ const int additional_words = 1;
+ int frame_size_in_words;
+
+ assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before");
+
+ ResourceMark rm;
+ OopMapSet *oop_maps = new OopMapSet();
+ OopMap* map;
+
+ // allocate space for the code
+ // setup code generation tools
+ CodeBuffer buffer("handler_blob", 1024, 512);
+ MacroAssembler* masm = new MacroAssembler(&buffer);
+
+ const Register java_thread = rdi; // callee-saved for VC++
+ address start = __ pc();
+ address call_pc = NULL;
+
+ // If cause_return is true we are at a poll_return and there is
+ // the return address on the stack to the caller on the nmethod
+ // that is safepoint. We can leave this return on the stack and
+ // effectively complete the return and safepoint in the caller.
+ // Otherwise we push space for a return address that the safepoint
+ // handler will install later to make the stack walking sensible.
+ if( !cause_return )
+ __ pushl(rbx); // Make room for return address (or push it again)
+
+ map = RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words, false);
+
+ // The following is basically a call_VM. However, we need the precise
+ // address of the call in order to generate an oopmap. Hence, we do all the
+ // work ourselves.
+
+ // Push thread argument and setup last_Java_sp
+ __ get_thread(java_thread);
+ __ pushl(java_thread);
+ __ set_last_Java_frame(java_thread, noreg, noreg, NULL);
+
+ // if this was not a poll_return then we need to correct the return address now.
+ if( !cause_return ) {
+ __ movl(rax, Address(java_thread, JavaThread::saved_exception_pc_offset()));
+ __ movl(Address(rbp, wordSize), rax);
+ }
+
+ // do the call
+ __ call(RuntimeAddress(call_ptr));
+
+ // Set an oopmap for the call site. This oopmap will map all
+ // oop-registers and debug-info registers as callee-saved. This
+ // will allow deoptimization at this safepoint to find all possible
+ // debug-info recordings, as well as let GC find all oops.
+
+ oop_maps->add_gc_map( __ pc() - start, map);
+
+ // Discard arg
+ __ popl(rcx);
+
+ Label noException;
+
+ // Clear last_Java_sp again
+ __ get_thread(java_thread);
+ __ reset_last_Java_frame(java_thread, false, false);
+
+ __ cmpl(Address(java_thread, Thread::pending_exception_offset()), NULL_WORD);
+ __ jcc(Assembler::equal, noException);
+
+ // Exception pending
+
+ RegisterSaver::restore_live_registers(masm);
+
+ __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
+
+ __ bind(noException);
+
+ // Normal exit, register restoring and exit
+ RegisterSaver::restore_live_registers(masm);
+
+ __ ret(0);
+
+ // make sure all code is generated
+ masm->flush();
+
+ // Fill-out other meta info
+ return SafepointBlob::create(&buffer, oop_maps, frame_size_in_words);
+}
+
+//
+// generate_resolve_blob - call resolution (static/virtual/opt-virtual/ic-miss
+//
+// Generate a stub that calls into vm to find out the proper destination
+// of a java call. All the argument registers are live at this point
+// but since this is generic code we don't know what they are and the caller
+// must do any gc of the args.
+//
+static RuntimeStub* generate_resolve_blob(address destination, const char* name) {
+ assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before");
+
+ // allocate space for the code
+ ResourceMark rm;
+
+ CodeBuffer buffer(name, 1000, 512);
+ MacroAssembler* masm = new MacroAssembler(&buffer);
+
+ int frame_size_words;
+ enum frame_layout {
+ thread_off,
+ extra_words };
+
+ OopMapSet *oop_maps = new OopMapSet();
+ OopMap* map = NULL;
+
+ int start = __ offset();
+
+ map = RegisterSaver::save_live_registers(masm, extra_words, &frame_size_words);
+
+ int frame_complete = __ offset();
+
+ const Register thread = rdi;
+ __ get_thread(rdi);
+
+ __ pushl(thread);
+ __ set_last_Java_frame(thread, noreg, rbp, NULL);
+
+ __ call(RuntimeAddress(destination));
+
+
+ // Set an oopmap for the call site.
+ // We need this not only for callee-saved registers, but also for volatile
+ // registers that the compiler might be keeping live across a safepoint.
+
+ oop_maps->add_gc_map( __ offset() - start, map);
+
+ // rax, contains the address we are going to jump to assuming no exception got installed
+
+ __ addl(rsp, wordSize);
+
+ // clear last_Java_sp
+ __ reset_last_Java_frame(thread, true, false);
+ // check for pending exceptions
+ Label pending;
+ __ cmpl(Address(thread, Thread::pending_exception_offset()), NULL_WORD);
+ __ jcc(Assembler::notEqual, pending);
+
+ // get the returned methodOop
+ __ movl(rbx, Address(thread, JavaThread::vm_result_offset()));
+ __ movl(Address(rsp, RegisterSaver::rbx_offset() * wordSize), rbx);
+
+ __ movl(Address(rsp, RegisterSaver::rax_offset() * wordSize), rax);
+
+ RegisterSaver::restore_live_registers(masm);
+
+ // We are back the the original state on entry and ready to go.
+
+ __ jmp(rax);
+
+ // Pending exception after the safepoint
+
+ __ bind(pending);
+
+ RegisterSaver::restore_live_registers(masm);
+
+ // exception pending => remove activation and forward to exception handler
+
+ __ get_thread(thread);
+ __ movl(Address(thread, JavaThread::vm_result_offset()), NULL_WORD);
+ __ movl(rax, Address(thread, Thread::pending_exception_offset()));
+ __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
+
+ // -------------
+ // make sure all code is generated
+ masm->flush();
+
+ // return the blob
+ // frame_size_words or bytes??
+ return RuntimeStub::new_runtime_stub(name, &buffer, frame_complete, frame_size_words, oop_maps, true);
+}
+
+void SharedRuntime::generate_stubs() {
+
+ _wrong_method_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::handle_wrong_method),
+ "wrong_method_stub");
+
+ _ic_miss_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::handle_wrong_method_ic_miss),
+ "ic_miss_stub");
+
+ _resolve_opt_virtual_call_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::resolve_opt_virtual_call_C),
+ "resolve_opt_virtual_call");
+
+ _resolve_virtual_call_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::resolve_virtual_call_C),
+ "resolve_virtual_call");
+
+ _resolve_static_call_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::resolve_static_call_C),
+ "resolve_static_call");
+
+ _polling_page_safepoint_handler_blob =
+ generate_handler_blob(CAST_FROM_FN_PTR(address,
+ SafepointSynchronize::handle_polling_page_exception), false);
+
+ _polling_page_return_handler_blob =
+ generate_handler_blob(CAST_FROM_FN_PTR(address,
+ SafepointSynchronize::handle_polling_page_exception), true);
+
+ generate_deopt_blob();
+#ifdef COMPILER2
+ generate_uncommon_trap_blob();
+#endif // COMPILER2
+}