#

# Copyright (c) 1995, 2010, Oracle and/or its affiliates. All rights reserved.

# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

#

# This code is free software; you can redistribute it and/or modify it

# under the terms of the GNU General Public License version 2 only, as

# published by the Free Software Foundation.  Oracle designates this

# particular file as subject to the "Classpath" exception as provided

# by Oracle in the LICENSE file that accompanied this code.

#

# This code is distributed in the hope that it will be useful, but WITHOUT

# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

# version 2 for more details (a copy is included in the LICENSE file that

# accompanied this code).

#

# You should have received a copy of the GNU General Public License version

# 2 along with this work; if not, write to the Free Software Foundation,

# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

#

# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

# or visit www.oracle.com if you need additional information or have any

# questions.

#

#

# Common variables used by all the Java makefiles.  This file should

# not contain rules.

#

# WARNING: This file is shared with other workspaces.

#          So when it includes other files, it must use JDK_TOPDIR.

#

# Check for strange explicit settings (change to empty or true)

ifdef OPENJDK

  ifneq ($(OPENJDK),true)

    x:=$(error "OPENJDK (if defined) can only be set to true")

  endif

endif

#

# On Solaris, the 'make' utility from Sun will not work with these makefiles.

#    This little rule is only understood by Sun's make, and is harmless

#    when seen by the GNU make tool. If using Sun's make, this causes the

#    make command to fail.

#

SUN_MAKE_TEST:sh = echo "ERROR: PLEASE USE GNU VERSION OF MAKE"; exit 33

ifndef JDK_TOPDIR

  ifdef BUILDDIR

    JDK_TOPDIR=$(BUILDDIR)/..

  else

    JDK_TOPDIR:=$(error "ERROR: Cannot define top of jdk repository")

  endif

endif

ifndef BUILDDIR

  # Hack, due to deploy repository using this file.

  BUILDDIR=$(JDK_TOPDIR)/make

endif

ifndef JDK_MAKE_SHARED_DIR

  JDK_MAKE_SHARED_DIR=$(JDK_TOPDIR)/make/common/shared

endif

include $(JDK_MAKE_SHARED_DIR)/Platform.gmk

TOPDIR=$(BUILDDIR)/..

include $(JDK_TOPDIR)/make/common/CancelImplicits.gmk

# Historically PLATFORM_SRC used to be src/$(PLATFORM), but we switched it to

# src/solaris so if you want to build on Linux you didn't need a src/linux

# directory.  In an ideal world it would be called src/genunix but we are not

# there yet.

#

ifndef SHARE_SRC

  SHARE_SRC    = $(BUILDDIR)/../src/share

endif

# Files that cannot be included in the OpenJDK distribution are

# collected under a parent directory which contains just those files.

ifndef CLOSED_SRC

  CLOSED_SRC  = $(BUILDDIR)/../src/closed

endif

# If CLOSE_SRC_INCLUDED isn't set to true, check if there's any

# closed directory.

ifneq ($(CLOSED_SRC_INCLUDED), true)

  CLOSED_SRC_INCLUDED := $(shell \

    if [ -d $(CLOSED_SRC) ] ; then \

      echo true; \

    else \

      echo false; \

    fi)

endif

# Set OPENJDK based on CLOSED_SRC_INCLUDED

ifeq ($(CLOSED_SRC_INCLUDED), false)

  OPENJDK = true

endif

# Define where closed directories are

ifdef OPENJDK

  CLOSED_SRC =

  CLOSED_SHARE_SRC =

else

  ifndef CLOSED_SHARE_SRC

    CLOSED_SHARE_SRC    = $(CLOSED_SRC)/share

  endif

endif

#

# Get platform definitions

#

include $(JDK_TOPDIR)/make/common/Defs-$(PLATFORM).gmk

#

# Freetype logic is applicable to OpenJDK only

#

ifdef OPENJDK

#if we use system lib we do not need to copy it to build tree

USING_SYSTEM_FT_LIB=false

ifeq ($(PLATFORM), windows)

  DEVTOOLS_FT_DIR=$(JDK_DEVTOOLS_DIR)/win32/freetype-$(ARCH)

endif

ifeq ($(PLATFORM), linux)

  DEVTOOLS_FT_DIR=$(JDK_DEVTOOLS_DIR)/$(PLATFORM)/freetype-$(ARCH)

endif

ifeq ($(PLATFORM), solaris)

  # historically for Solaris we have slightly different devtools 

  # naming conventions

  DEVTOOLS_FT_DIR=$(JDK_DEVTOOLS_DIR)/$(ARCH_FAMILY)/freetype-$(ARCH)

endif

DEVTOOLS_FT_DIR_EXISTS = $(shell \

  if [ -f $(DEVTOOLS_FT_DIR)/include/ft2build.h ] ; then \

    echo true; \

  else \

    echo false; \

  fi)

  ifdef ALT_FREETYPE_LIB_PATH

    FREETYPE_LIB_PATH = $(ALT_FREETYPE_LIB_PATH)

  else

    ifeq ($(DEVTOOLS_FT_DIR_EXISTS), true)

      FREETYPE_LIB_PATH = $(DEVTOOLS_FT_DIR)/lib

    else

      FREETYPE_LIB_PATH = /usr/lib

      USING_SYSTEM_FT_LIB=true

    endif

  endif 

  ifdef ALT_FREETYPE_HEADERS_PATH

    FREETYPE_HEADERS_PATH = $(ALT_FREETYPE_HEADERS_PATH)

  else

    ifeq ($(DEVTOOLS_FT_DIR_EXISTS), true)

      FREETYPE_HEADERS_PATH = $(DEVTOOLS_FT_DIR)/include

    else

      FREETYPE_HEADERS_PATH = /usr/include

    endif

  endif

endif

#

# zlib version

#

ZLIB_VERSION = 1.2.3

#

# Localizations for the different parts of the product beyond English

#

JRE_LOCALES   = de es fr it ja ko pt_BR sv zh_CN zh_TW zh_HK

PLUGIN_LOCALES = de es fr it ja ko pt_BR sv zh_CN zh_TW zh_HK

JDK_LOCALES  = ja zh_CN

#

# A list of locales we support but don't have resource files.

# This is defined to optimize the search of resource bundles.

#

JRE_NONEXIST_LOCALES = en en_US de_DE es_ES fr_FR it_IT ja_JP ko_KR sv_SE zh

#

# All libraries except libjava and libjvm itself link against libjvm and

# libjava, the latter for its exported common utilities.  libjava only links

# against libjvm.  Programs' makefiles take their own responsibility for

# adding other libs.

#

ifdef PACKAGE

# put JAVALIB first, but do not lose any platform specific values....

  LDLIBS_COMMON = $(JAVALIB)

endif # PACKAGE

#

# Libraries that must appear ahead of libc.so on the link command line

#

ifdef PROGRAM

  ifeq ($(PLATFORM), solaris)

    LDLIBS_COMMON = -lthread -ldl

  endif

  ifeq ($(PLATFORM), linux)

    LDLIBS_COMMON = -ldl

  endif

endif # PROGRAM

LDLIBS_COMMON += $(EXTRA_LIBS)

# for generated libraries

LIBDIR              = $(OUTPUTDIR)/lib

ABS_LIBDIR          = $(ABS_OUTPUTDIR)/lib

# Optional place to save the windows .lib files

LIBFILES_DIR        = $(OUTPUTDIR)/libfiles

# for ext jre files

EXTDIR              = $(LIBDIR)/ext

# for generated include files

INCLUDEDIR          = $(OUTPUTDIR)/include

# for generated class files

CLASSBINDIR         = $(OUTPUTDIR)/classes

DEMOCLASSDIR        = $(OUTPUTDIR)/democlasses

# for modules

MODULES_DIR         = $(OUTPUTDIR)/modules

ABS_MODULES_DIR     = $(ABS_OUTPUTDIR)/modules

# for generated tool class files

BUILDTOOLCLASSDIR   = $(OUTPUTDIR)/btclasses

# for build tool jar files

BUILDTOOLJARDIR     = $(OUTPUTDIR)/btjars

ABS_BUILDTOOLJARDIR = $(ABS_OUTPUTDIR)/btjars

# for generated tool class files

BUILDTOOLBINDIR     = $(OUTPUTDIR)/btbins

# for generated java source files

GENSRCDIR           = $(OUTPUTDIR)/gensrc

# for generated C source files (not javah)

GENNATIVESRCDIR     = $(OUTPUTDIR)/gennativesrc

# for imported source files

IMPORTSRCDIR        = $(OUTPUTDIR)/impsrc

# for imported documents

IMPORTDOCDIR        = $(OUTPUTDIR)/impdoc

# for generated demo

DEMODIR             = $(OUTPUTDIR)/demo

# for sample code

SAMPLEDIR           = $(OUTPUTDIR)/sample

# for generated documentation

DOCSDIR             = $(OUTPUTDIR)/docs$(DOCSDIRSUFFIX)

DOCSDIRSUFFIX       =

# The MESSAGE, WARNING and ERROR files are used to store sanityck and 

# warnings and errors. 

ifndef ERROR_FILE

  ERROR_FILE   = $(OUTPUTDIR)/sanityCheckErrors.txt

endif

ifndef WARNING_FILE

  WARNING_FILE = $(OUTPUTDIR)/sanityCheckWarnings.txt

endif

ifndef MESSAGE_FILE

  MESSAGE_FILE = $(OUTPUTDIR)/sanityCheckMessages.txt

endif

JDK_IMAGE_DIR = $(ABS_OUTPUTDIR)/j2sdk-image

JRE_IMAGE_DIR = $(ABS_OUTPUTDIR)/j2re-image

#where the demo source can be found

DEMOSRCDIR          = $(SHARE_SRC)/demo

# An attempt is made to generate unique enough directories for the

# generated files to not have name collisisons. Most build units

# defines PRODUCT (except Release.gmk), but then they may or may 

# not define PACKAGE, PROGRAM, and LIBRARY. This code attempts to

# generate a unique OBJDIR/CLASSHDRDIR for each build unit based

# on which of those values are set within each build unit.

UNIQUE_LOCATION_STRING = tmp

ifneq ($(PRODUCT),)

  UNIQUE_LOCATION_STRING += /$(PRODUCT)

endif

ifneq ($(PACKAGE),)

  UNIQUE_LOCATION_STRING += /$(PACKAGE)

endif

ifneq ($(PROGRAM),)

  UNIQUE_LOCATION_STRING += /$(PROGRAM)

endif

ifneq ($(LIBRARY),)

  ifneq ($(LIBRARY_OUTPUT),)

    UNIQUE_LOCATION_STRING += /$(LIBRARY_OUTPUT)

  else

    UNIQUE_LOCATION_STRING += /$(LIBRARY)

  endif

endif

#

# Build units may or may not define MODULE.  Default to "other".

#

# MODULE variable defines the lowest-level module name that

# might or might not be the name of the modules created in

# the modules build (see make/modules/modules.config and

# modules.group).

#

MODULES_TEMPDIR     = $(OUTPUTDIR)/tmp/modules

ABS_MODULES_TEMPDIR = $(ABS_OUTPUTDIR)/tmp/modules

ifndef MODULE

  MODULE = other

endif

override MODULE_DEST_DIR = $(MODULES_TEMPDIR)/$(MODULE)

# the use of += above makes a space separated list which we need to 

# remove for filespecs.

#

NULLSTRING :=

ONESPACE := $(NULLSTRING) # space before this comment is required.

UNIQUE_PATH = $(subst $(ONESPACE),,$(UNIQUE_LOCATION_STRING))

# TEMPDIR is a unique general purpose directory

# need to use 'override' because GNU Make on Linux exports the wrong

# value.

override TEMPDIR      = $(OUTPUTDIR)/$(UNIQUE_PATH)

override ABS_TEMPDIR  = $(ABS_OUTPUTDIR)/$(UNIQUE_PATH)

# This must be created right away for pattern rules in Sanity.gmk to work.

dummy1:=$(shell $(MKDIR) -p $(TEMPDIR))

dummy2:=$(shell $(MKDIR) -p $(TEMP_DISK))

# OBJDIRNAME is the name of the directory where the object code is to

#   be placed. It's name depends on whether the data model architecture 

#   is 32-bit or not.

ifneq ($(ARCH_DATA_MODEL), 32)

  OBJDIRNAME  = obj$(ARCH_DATA_MODEL)$(OBJDIRNAME_SUFFIX)

else

  OBJDIRNAME  = obj$(OBJDIRNAME_SUFFIX)

endif

OBJDIR      = $(TEMPDIR)/$(OBJDIRNAME)

# CLASSHDRDIR is where the generated C Class Header files go.

CLASSHDRDIR = $(TEMPDIR)/CClassHeaders

#

# CLASSDESTDIR can be used to specify the directory where generated classes

# are to be placed. The default is CLASSBINDIR.

#

ifndef CLASSDESTDIR

CLASSDESTDIR = $(CLASSBINDIR)

endif

INCLUDES = -I. -I$(CLASSHDRDIR) \

	$(patsubst %,-I%,$(subst $(CLASSPATH_SEPARATOR), ,$(VPATH.h))) $(OTHER_INCLUDES)

OTHER_CPPFLAGS = $(INCLUDES)

#

# vpaths.  These are the default locations searched for source files.

# GNUmakefiles of individual areas often override the default settings.

# There are no longer default vpath entries for C and assembler files

# so we can ensure that libraries don't get their hands on JVM files.

#

# We define an intermediate variable for Java files because

# we use its value later to help define $SOURCEPATH

VPATH0.java = $(GENSRCDIR)$(CLASSPATH_SEPARATOR)$(PLATFORM_SRC)/classes$(CLASSPATH_SEPARATOR)$(SHARE_SRC)/classes

ifdef OPENJDK

  VPATH.java = $(VPATH0.java)

else

  #

  # If filenames are duplicated between open/closed workspaces, prefer

  # the closed files.

  #

  # Source ordering is important: some targets depend on closed files

  # replacing open ones, and thus the closed file sources must be found

  # before the open ones.

  #

  # Don't reorder without consulting the teams that depend on this behavior.

  #

  VPATH.java = $(CLOSED_PLATFORM_SRC)/classes$(CLASSPATH_SEPARATOR)$(CLOSED_SHARE_SRC)/classes$(CLASSPATH_SEPARATOR)$(VPATH0.java)

endif

vpath %.java $(VPATH.java)

vpath %.class $(CLASSBINDIR)

vpath %.$(OBJECT_SUFFIX) $(OBJDIR)

#

# VPATH.h is used elsewhere to generate include flags.  By default, 

# anyone has access to the include files that the JVM area exports,

# namely jni.h, jvm.h, and jni_utils.h, plus their platform-specific

# relatives.

#

VPATH.h =   $(PLATFORM_SRC)/javavm/export$(CLASSPATH_SEPARATOR)$(SHARE_SRC)/javavm/export

vpath %.h   $(VPATH.h)

#

# Used in two ways: helps link against libjava.so. Also if overridden

# determines where your shared library is installed.

#

ifndef LIB_LOCATION

  LIB_LOCATION    =  $(LIBDIR)/$(LIBARCH)

endif

#

# Java header and stub variables

#

CLASSHDRS     = $(patsubst %,$(CLASSHDRDIR)/%.h,$(subst .,_,$(CLASSES.export)))

CLASSSTUBOBJS = classstubs.$(OBJECT_SUFFIX)

STUBPREAMBLE  = $(INCLUDEDIR)/StubPreamble.h

#

# Classpath seen by javac (different from the one seen by the VM

# running javac), and useful variables.

#

SOURCEPATH	= $(VPATH.java)

PKG		= $(shell $(EXPR) $(PACKAGE) : '\([a-z]*\)')

PKGDIR		= $(subst .,/,$(PACKAGE))

#

# The java/javac/jdk variables (JAVAC_CMD, JAVA_CMD, etc.)

#

include $(JDK_MAKE_SHARED_DIR)/Defs-java.gmk

#

# Macros to find the module that $@ belongs to

#

UNIQUE_PATH_PATTERN = $(subst /,.,$(UNIQUE_PATH))

MODULE_PATH_PATTERN = -e 's%.*\/classes\/%classes\/%' \

		      -e 's%.*\/$(UNIQUE_PATH_PATTERN)\/%classes\/%' \

		      -e 's%.*\/lib\/%lib\/%' \

	              -e 's%.*\/bin\/%bin\/%' \

	              -e 's%.*\/include\/%include\/%' \

		      -e 's%.*\/demo\/%demo\/%' \

		      -e 's%.*\/sample\/%sample\/%'

# Install a file to its module

define install-module-file

dest=`echo $(@D)/ | $(SED) $(MODULE_PATH_PATTERN)` ; \

$(MKDIR) -p $(MODULE_DEST_DIR)/$$dest; \

$(CP) -f $@ $(MODULE_DEST_DIR)/$$dest

endef

# Install all files from the directory to its module

define install-module-dir

dest=`echo $(@D)/ | $(SED) $(MODULE_PATH_PATTERN)` ; \

$(MKDIR) -p $(MODULE_DEST_DIR)/$$dest; \

$(CP) -rf $(@D)/* $(MODULE_DEST_DIR)/$$dest

endef

# chmod the file in its module

define chmod-module-file

dest=`echo $@ | $(SED) $(MODULE_PATH_PATTERN)` ; \

$(CHMOD) $1 $(MODULE_DEST_DIR)/$$dest

endef

# install a sym link in its module

define install-module-sym-link

dest=`echo $@ | $(SED) $(MODULE_PATH_PATTERN)` ; \

$(LN) -sf $1 $(MODULE_DEST_DIR)/$$dest

endef

# Run MAKE $@ for a launcher:

#   $(call make-launcher, name, mainclass, java-args, main-args)

define make-launcher

$(CD) $(BUILDDIR)/launchers && \

$(MAKE) -f Makefile.launcher \

        MODULE=$(MODULE) \

        PROGRAM=$(strip $1) \

        MAIN_CLASS=$(strip $2) \

        MAIN_JAVA_ARGS="$(strip $3)" \

        MAIN_ARGS="$(strip $4)"

endef

#

# Convenient macros

#

# Prepare $@ target, remove old one and making sure directory exists

define prep-target

$(MKDIR) -p $(@D)

$(RM) $@

endef

# Simple install of $< file to $@

define install-file

$(prep-target)

$(CP) $< $@

@$(install-module-file)

endef

define chmod-file

$(CHMOD) $1 $@

@$(call chmod-module-file, $1)

endef

define install-sym-link

$(LN) -s $1 $@

@$(call install-module-sym-link, $1)

endef

#

# Marcos for files not belonging to any module 

define install-non-module-file

$(prep-target)

$(CP) $< $@

endef

define install-manifest-file

$(install-non-module-file)

endef

# Cleanup rule for after debug java run (hotspot.log file is left around)